Return to flip book view

USER MANUALEISX100 BACKPACK SPRAYER

Safety and Operation Precautions Working PrincipleScope of Application Technical Parameters How to UseProduct Structure Packing list1)2)3)4)5)6)7)CONTENTS

Warning: If the solution overflows from the mouth of the barrel, and wet the outer surface of thebarrel and the clothes and body of the operator, it will easily lose the electrostatic adsorption effectand cause poisoning and static leakage to stimulate the operator's skin. Therefore, be sure totighten the lid during operation.During operation, be sure to tighten the lid to prevent the liquid from overflowing from the mouth ofthe bucket. If the soluble powder is sprayed, the pump and nozzle should be immediately afterspraying is completed and the sprayer charged after the operation.Keeping the spray bar tightly connected and the surface of the barrel dry and clean is veryimportant to ensure the safe operation of the sprayer.The electrostatic adsorption effect and comfortable control wants a dry backpack container.When using the air gun for spraying, be sure to turn on the air gun motor before starting the waterpump for spraying; when turning off the air gun, you should first cut off the power of the waterpump and then cut off the power of the air gun, so as to prevent moisture caused by the inside ofthe air gun.Never use liquids that are corrosive to plastics and metals to avoid damaging important parts suchas the storage tank, water pump, and nozzle. This machine cannot use wettable powder.Electrostatic sprayer refers to a sprayer that can cause the sprayed droplets to produce a significantelectrostatic entrapment adsorption effect on the target. This sprayer is a multifunctional 12vpowered electric electrostatic sprayer and the sprayer generates the static electricity charge in thebase of the backpack.The sprayer offers several operating modes such as electric spray, low-volume spray, air-blast sprayand electrostatic spray. The sprayer offers significant cost reduction and is an ideal high-efficiencyplant protection and pesticide sprayer in the field of plant diseases and insect pests prevention andcontrol.The sprayers multiple spray modes supports the various areas in and around structures andbuildings that need sanitation and epidemic prevention and disinfection and insecticide in modernliving areas.Description of safety warning signsProtective coverall, Protective masks, Gloves, CleaningEISX100 USER MANUAL

Safety and Operation Precautions1. Please be sure to properly filter the chemical liquids and water to ensure there is no solidparticles, this is to avoid clogging the nozzle and negatively impacting the spraying operation.2. If the nozzle is blocked, stop the machine, remove the particulate matter and the machine can beturned on again.3. The operator must wear personal protective equipment based upon the chemicals used to avoidharming the operator caused by direct body contact with the chemicals.4. Do not spray chemicals that have a corrosive effect on plastics and metals. Do not SprayFlammable products.5. After the machine is used, the interior of the tank and the spraying system should be cleaned withclear water and wiped clean and placed in a clean dry area for storage.6. Cleaning method: After spraying the liquid medicine, pour clean water into the storage tank, andspray it for 15 seconds after starting up, pour out the remaining clean water and wipe it clean.7. Do not immerse the Air Gun or Backpack in water to prevent the motor, battery, and electroniccomponents from being damaged by moisture.8. Do Not use the use the electrostatic sprayer in a flammable and explosive environment.9. During operation, pay attention to keep the outer surface and handle of the barrel in a clean anddry state.10.Do not make contact with other people during the operation.11. Do Not touch the boom and the charging socket of the barrel during operation.12. Please note that if an alarm sounds in the machine (lead-acid battery), the battery needs to becharged. After charging, please let the system rest for 10 minutes before use.13. For optimal performance the battery should be maintained and charged no less than once amonth. Correct use and maintenance of the battery can greatly extend the service life of the battery.14. There are tens of thousands of volts of static electricity generated by this sprayer, do notdisassemble the machine yourself.15. Do not spray chemicals such as strong acids and bases.16. When using pesticides, follow the safety instructions provided by pesticide manufacturers.17. Due to the high ht1midity and water vapor in the greenhouse, please do not store the machine inthe greenhouse to avoid dampening the electrical circuits in the machine, affecting the electrostaticadsorption effect of the spray and generating electrostatic leakage.

Working PrincipleThis machine uses a 12V lead-acid battery or a can support an optional lithium battery as a power source. The high-voltage electrostatic generator charges the liquid electrolyte with one polarity ofstatic charge. At the same time, the target is charged with the opposite polarity of static charge bymeans of a static charge generator in the base.After being pressurized by the diaphragm pump, the disinfectant/pesticide liquid with a polar static charge is directly sprayed out from the small nozzle hole, or when using the air gun a fine mist ofdroplets are sent a long distance via the fan in the the air gun.The sprayed fine droplets with a positive polar static charge and under the combined action ofspraying force and the electrostatic force, directly run to the negative sides of the target with theopposite polar static charge. The Target a hard surface or a leaf of the plant will firmly attach to thesolution sprayed, and will achieve and efficient disinfection, insecticide and/or sanitization. Scope of ApplicationThis machine is suitable for the control of diseases and insect pests of low and sparse crops andvarious agricultural and forest crops such as tea, tobacco, flowers, fruit trees and other crops(especially suitable for greenhouse crops).It can be used for spraying disinfectants, sanitizing agents, insecticides, fungicides, herbicides, plant hormones, fertilizers, etc., and is designed for sanitation and epidemic prevention and disinfectionof environments such as factories, warehouses, stations, docks, hotels, trains, buses, cars, airports,farms, and livestock and pest extermination.The Sprayer can easily spray all kinds of water, liquids, soluble powders and emulsions. After spraying soluble powder, the pump and nozzle should be cleaned in time. Technical ParametersDimensions mm 380 x 190 x 540 Working speed 30000-15000m2/hourNet weight kg 5.6 (Lead-acid batteries) with battery 4.1 (Lithium battery)Spray range ~2.sm (Boom swing) ~Gm (Air gun swing)Working timeafter a full charge(boom) ~6 hours(Blow gun) ~1.5 hoursLiquid capacity L 16Operatingvoltage V 12Fog dropletmedian diameter40-90 umWorking pressure MPa 0.15 -0.4 Spray flow Hourly 4-12 litersBattery capacity 12V 8-118aH Static generator 15-30KV output voltageCharger input/ ACIIO-240/ 0(12-14.8) Air gun net 15KGOutput voltage V

Note: 1. When using always turn on the power for the air gun first before turning on the power for thesprayer 2. When turning off, always power off the sprayer first before powering off the air gun. Payattention to the order of operations to avoid impacting sprayer performance.3. When spraying, you should follow the wind and avoid spraying against the wind to avoid affectingthe impacting the operator with the chemical being sprayed.Air Gun Connection and Operating Instruction1. When installing the fine mist 3 nozzle, please properly tighten.2. Install the nozzle protective cover.3. Connect and tighten the Inlet pipe to the air gun and he outlet pipe of the sprayer4. Connect the power plug of the air gun to the power socket of the sprayer.5. Turn on he power switch of the air gun first. . 6. Turn on the power switch of the sprayer next

Trigger Sprayer and Wand Switch Connection andOperating Instruction Connect and Tighten one end of the handle1. switch to the outlet of the sprayer2. Connect and tighten the boom to the handle switch3. Turn on the power switch of the sprayer 4. When spraying, hold the handle and press the flow switch5. The power switch should be turned off after spraying.

How to Use1. Reference method for dispensing: Refer to the instructions of the pesticide packaging,subtract about 60% of the indicated amount of chemical, after fully dissolving in appropriateamount of water and filtering, pour Inside the bucket, wipe off the water on the outside of thebucket, and close the lid tightly.2. Note the liquid added to the barrel must be fully filtered, otherwise it will cause clogging ofthe nozzle and affect the normal spray operation and prevention and control effect. The specificdosage of chemical/ pesticide and water can also be adjusted according to the speed of eachperson spraying to accommodate the building area as well as the height and density of crops.When handling pesticides, follow the safety instructions provided by the pesticidemanufacturer.3. Operation sequence: Tighten the lid of the bucket after dispensing, carry the storage bucketon operator's back, hold the handle of the spray rod, and then turn on the main switch of thebase of the bucket to spray the nozzle towards the crop.4. When the air gun is sprayed, the air gun switch should be turned on first, and then the barrelbase switch. After spraying, the base switch of the barrel should be turned off first, and then theair gun switch should be turned off.5. Spraying method: when spraying, start from the upper wind head of the field or outside areato be sanitized, position the spray wand so the spray head is in front operator andchemical/pesticide is sprayed while walking forward along the wind direction. When sprayingwith the fine mist Air Gun proceed to spray so that the wind carry's the mist and it falls on thetarget surface or crops to avoid contamination to the operator.6. When spraying, you can walk at a speed of more than one step per second. When spraying withthe boom, the spray width (including swinging) is about 2.5 meters (8 feet).7. Grounding device: In order to strengthen the electrostatic absorption effect of the spray, themachine is equipped with an ionized air grounding electrode on the body. During operation, thecharge is conducted by air ionization to enhance the electrostatic absorption effect.8. Spraying time: During the hot summer season, the effect of spraying before 11 am and after 2pm is better (the greenhouse operation is not limited to this). However, in windy weather, thedirection and range of the fog may be difficult to control due to the influence of the wind.Therefore, it is not suitable for use. It is not suitable for use in rain and snow and thick fog. Theambient temperature of this machine is above 0°C to below 40°C. (32 degrees F to 104 degreesF)

ELECTROSTATIC SPRAYERS