Stiebel Eltron UK Pricebook 2025 : simplebooklet.com

Explanation of symbolsSymbolerklärungPricesAll prices are recommended retail prices excluding VAT. A key to discounts can be found in the appendix to the product catalogue.With the publication of this printed version, all previous versions become invalid. This version is only intended for use by wholesalers, specialist trade shops and qualiﬁed contractors. The wholesale product and price overviews are deﬁnitive for the prices. Duplication and/or transmission is therefore not permitted. This printed version is not intended for consumers. Deliveries are made in accordance with our general terms of delivery and payment. The binding basis for the use and installation of the appliances are the printed documents included with the appliances, as well as the relevant regulations.The editorial deadline for this printed version was 30/10/2024. The latest technical values can be found on our homepage at www.stiebel-eltron.co.ukGroup supply Heat source – air FanIndividual supply Heat source – ground Integrated control unitCentral supply Heat source – water Self-limitingFloorstanding installation DHW cylinder integrated UV-resistantOversink installation Buffer cylinder integrated Mastic asphaltUndersink installationInstantaneous water cylinder integrated Infloor installationIndoor installation Ventilation heating QuietOutdoor installation Central ventilation Short drying timePortable Decentralised ventilation Normal drying timeFully wired Heat recovery2i technologyPermanent connection Moisture recovery3i technologyPressurised / unvented Dehumidify4i technologyNon-pressurised / vented HeatingAnti-dripBoiling water (approx. 100 °C) CoolingThermostopHigh temperature (approx. 85 °C)Heating circuit, thermostatic mi-xingProfi-RapidAverage temperature (approx. 60 °C)Heating circuit, electronic mixingProfi-DirectLow temperature (approx. 50 °C) Electric reheatingHigh efficiencyHigh flow rate Domestic hot waterExtremely quietAverage flow rate Manual fillingC-PLUS technologyLow flow rate Automatic fillingECO Comfort Plus DynamicRadiator IR radiant heatSubsidies availableUnderfloor heating Convectionl | n New | Discontinued

Page 3

Table of contents Complete table of con-tentsTable of contentsComplete table of contentsProduct information 2025 - Subject to technical modiﬁcations. 3 Domestic hot water › Comfort instantaneous water heater20 › Compact instantaneous water heaters, 1-phase26 › Mini instantaneous water heaters32 › Taps for instantaneous water heaters36 › Accessories for instantaneous water heaters38 › Automatic water boilers42 › Small water heaters, non-pressurised46 › Accessories for small water heaters and DHW cylinders, non-pressurised56 › Small water heaters, pressurised60 › Accessories for small water heaters, pressurised62 › Wall mounted cylinder66 › Floor mounted cylinder70 › Accessories for ﬂoor mounted cylinders, pressurised72 Heat pumps › Air source heat pumps, outdoor installation – inverter80 › Accessories for air source heat pumps installed outdoors102 › Ground source heat pumps – inverter108 › Accessories for ground source heat pumps128 › Control units138 › Accessories for hydraulic modules152 › Integral cylinder154 › Accessories for integral cylinders160 › DHW cylinder164 › Accessories for DHW cylinders168 › Instantaneous water cylinder170 › Accessories for instantaneous water cylinders172 › Buffer cylinder174 › Accessories for buffer cylinders178 › Additional accessories182 › Heat pump accessories186 Ventilation › Central ventilation units196 › Accessories, central ventilation units206 › Distribution system for integral and central ventilation212 › Decentralised ventilation in residential buildings216 › Accessories for decentralised ventilation in residential buildings224 Room heating › Storage heaters232 › Accessories for storage heaters236 › Convectors244 › Duo convectors254 › Accessories for convectors256 › Rapid heater260 › Bathroom radiator262 › Infrared wall mounted radiant heater263 Hand dryer › Hand dryer, high speed268

Page 4

Page 5

Page 6

Table of contents Alphabetic directoryTable of contentsAlphabetic directoryProduct information 2025 - Subject to technical modiﬁcations.6Type Mat. no. Price PageA lAHP-PH 207742 200.00 £ 134lAHP-TC 207744 140.00 £ 134AS-HM Trend 233750 169.00 £ 152AS-WP 2 233623 114.00 £ 102ASHP 14.8kW / 225 Plus Compact Pack 206042 11,578.00 £ 93ASHP 14.8kW / 300 Pack 204913 11,609.00 £ 95ASHP 14.8kW / 300 Premium Compact Pack204912 13,598.00 £ 94ASHP 7.5kW Premium / 225 Plus Compact Pack206044 10,099.00 £ 87ASHP 7.5kW Premium / 300 Pack 204908 10,130.00 £ 86ASHP 7.5kW Premium / 300 Premium Compact Pack204907 12,119.00 £ 85ASHP 8.5kW / 200 Plus Compact Pack 206043 8,537.00 £ 96lAWG 80 207743 515.00 £ 133B BBI 5-I 205877 151.00 £ 178BGC 6 kW 500 mm ET 003769 267.00 £ 72, 182BGC/45 075115 280.00 £ 72, 182BHE 100 Plus 238714 627.00 £ 262BHE 175 T Plus 238715 677.00 £ 262BHE 50 Plus 239141 390.00 £ 262BHE 75 Plus 238713 520.00 £ 262BSW 230 200166 14.00 £ 237C CDT 180 204642 296.00 £ 161CK 20 Premium 237835 226.00 £ 260CK 20 Trend LCD 236653 151.00 £ 261CND 100 234814 401.00 £ 254CND 150 234815 464.00 £ 254CND 200 234816 512.00 £ 254CND 75 234813 341.00 £ 254CNS 100 Connect UK 205641 237.00 £ 245CNS 100 Trend NC 202003 177.00 £ 250CNS 100 Trend UK 236561 177.00 £ 249CNS 150 Connect UK 205642 268.00 £ 245CNS 150 Trend NC 202004 197.00 £ 250CNS 150 Trend UK 236562 197.00 £ 249CNS 200 Connect UK 205643 275.00 £ 246CNS 200 Trend NC 202005 204.00 £ 250lCNS 2000 Plus LCD Move (UK) 207061 204.00 £ 251CNS 250 Connect UK 205644 315.00 £ 246CNS 250 Trend UK 236564 232.00 £ 249CNS 300 Connect UK 205645 325.00 £ 246CNS 50 Connect UK 205639 223.00 £ 245CNS 50 Trend NC 202001 166.00 £ 250CNS 50 Trend UK 236559 166.00 £ 249CNS 75 Connect UK 205640 230.00 £ 245CNS 75 Trend NC 202002 170.00 £ 250CNS 75 Trend UK 236560 170.00 £ 249lCNS-B 2000 Plus LCD Move (UK) 207069 204.00 £ 251CNS-U 1000 Plus LCD (UK) 205869 176.00 £ 247CNS-U 1500 Plus LCD (UK) 205870 197.00 £ 247CNS-U 2000 Plus LCD (UK) 205871 204.00 £ 247CNS-U 2500 Plus LCD (UK) 205872 232.00 £ 247CNS-U 3000 Plus LCD (UK) 205873 240.00 £ 247CNS-U 500 Plus LCD (UK) 205867 166.00 £ 247CNS-U 750 Plus LCD (UK) 205868 170.00 £ 247CON 10 Premium U 200268 267.00 £ 244Type Mat. no. Price PageCON 15 Premium U 200269 273.00 £ 244CON 20 Premium U 200270 280.00 £ 244CON 30 Premium U 200276 376.00 £ 244CON 5 Premium U 201278 259.00 £ 244D DCE-S 10/12 Plus 238154 401.00 £ 28DCE-S 6/8 Plus 238153 377.00 £ 28DCE-X 10/12 Premium 238159 451.00 £ 26DCE-X 6/8 Premium 238158 428.00 £ 26DEM 3 Set 236584 308.00 £ 32DEM 4 Set 236462 308.00 £ 32DEM 6 Set 236463 308.00 £ 32DHB-E 18/21/24 Set 203866 640.00 £ 22DHB-E 27 LCD Set 203865 653.00 £ 22DHE 18/21/24 Set 204284 990.00 £ 20DHE 27 Set 204285 1,005.00 £ 20lDUCT VLR 70 S 203140 13.00 £ 224lDWS1 221382 91.00 £ 129E EAD 237742 22.00 £ 149EFS 237740 28.00 £ 146EHF 237736 284.00 £ 145EIL 237744 55.00 £ 148EIW 237745 75.00 £ 149EM 33-87 201715 471.00 £ 130lEM Meter 201675 454.00 £ 142lEM Trend 337397 75.00 £ 142EMW 202062 575.00 £ 131lERE UK 207643 110.00 £ 148ERS 237741 114.00 £ 147ERT 237738 65.00 £ 146ESH 120 F Trend GB 204791 712.00 £ 70ESH 150 F Trend GB 204792 854.00 £ 70ESH 180 F Trend GB 204793 890.00 £ 70ESH 210 F Trend GB 204794 930.00 £ 70ESH 250 F Trend GB 204795 1,011.00 £ 70ESH 300 F Trend GB 204796 1,102.00 £ 70ESS 237739 661.00 £ 145ET SBP 003711 71.00 £ 179EZE 237737 225.00 £ 143lEZE CNS Connect 207642 249.00 £ 144F FCR 21/120 E 071331 978.00 £ 72, 182FCR 21/60 071330 1,032.00 £ 72, 182FCR 28/120 E 000694 1,105.00 £ 72, 182FCR 28/180 E 000695 1,117.00 £ 72, 182lFEB 2.0 205018 119.00 £ 206lFEB 2.1 206612 171.00 £ 206FEG 201767 227.00 £ 132FET 234723 253.00 £ 141FEW 202099 352.00 £ 132lFMK EPA 12-2 W450/600 206597 53.00 £ 209lFMK EPM1 55-2 W450/600 206596 45.00 £ 208lFMS EPMC 65-10 W450/600 206610 121.00 £ 208FMS G3-5 LA 60 201455 14.00 £ 221FS-WP 22 233511 78.00 £ 130FS-WP 28 233512 134.00 £ 130FSHP-L45 202779 672.00 £ 191G GSHP 12kW / 162 Compact Pack 204403 14,549.00 £ 110, 111

Page 7

Table of contentsAlphabetic directoryProduct information 2025 - Subject to technical modiﬁcations. 7Type Mat. no. Price PageGSHP 12kW / 300 Pack 204407 15,581.00 £ 111GSHP 15kW / 162 Compact Pack 204408 15,331.00 £ 110, 111GSHP 15kW / 300 Pack 204404 17,638.00 £ 111GSHP 8kW / 175 Compact Pack 204401 13,083.00 £ 110, 111GSHP 8kW / 300 Pack 204402 14,116.00 £ 111H HG Set 33-87 201716 558.00 £ 131HOT 2.6 N 1600 Premium + 3in1 N3 c 203882 579.00 £ 42HOT 2.6 N 1600 Premium + 3in1 N4 b 203883 659.00 £ 42HPA-O 8 CS Plus int 239171 3,417.00 £ 97, 99HSBC 200 S (GB) Set 236917 3,723.00 £ 155HSBC 220 206641 3,900.00 £ 157HSBC 225 S 1 206045 3,723.00 £ 156HSBC 3-HKM 238825 605.00 £ 160HSBC 300 cool (GB) Set 204651 5,743.00 £ 154HSBC-HKM 234648 612.00 £ 160HUK 100 Set 203711 1,983.00 £ 191HUK 125 Set 203712 2,075.00 £ 191HUK 150 Set 203713 3,692.00 £ 191HUK 200 Set 203714 4,333.00 £ 191HUV 1 227420 347.00 £ 190HUV 2 223391 768.00 £ 190I ISG web 229336 889.00 £ 140IW 120 229339 66.00 £ 263lIntegration of ISG/SG ready 298662 277L LA 100 A 205771 341.00 £ 218LA 100 G-A 205906 49.00 £ 219LA 100 VE 205907 292.00 £ 220lLVS VTS 6 201456 459.00 £ 212lLVS VTS 9 234493 550.00 £ 212LWF W 100 VA - 60 231104 105.00 £ 220M MAE-K 205616 77.00 £ 57MAG 12 235218 69.00 £ 129MAG 18 235219 77.00 £ 129MAG 25 235220 91.00 £ 129MAG 50 235221 137.00 £ 129MAZ 205621 100.00 £ 36R RBS-SBC 238827 284.00 £ 160S lSBB 300 Trend 206187 1,683.00 £ 165SBB 300-1 Plus GB 202923 1,489.00 £ 165SBB 302 WP (GB) Set 228945 2,506.00 £ 164SBB 400-1 Plus GB 202924 1,557.00 £ 165SBB 401 WP SOL (GB) Set 228946 2,777.00 £ 164SBB 500-1 Plus GB 202925 1,919.00 £ 165SBB 501 WP SOL (GB) Set 228947 3,046.00 £ 164lSBP 100 classic 235200 536.00 £ 174SBP 1000 E 227564 1,972.00 £ 176SBP 1000 E SOL 227566 2,087.00 £ 176SBP 1500 E 227565 2,073.00 £ 176SBP 1500 E SOL 227567 3,059.00 £ 176SBS 1001 W Set 236483 3,858.00 £ 170SBS 1501 W Set 236484 4,872.00 £ 170SBS 601 W Set 236481 3,046.00 £ 170SBS 801 W Set 236482 3,452.00 £ 170Type Mat. no. Price PageSH 15 SL GB Set AX 227692 442.00 £ 60SHS 1200 200181 723.00 £ 232SHS 1800 200182 743.00 £ 232SHS 2400 200183 804.00 £ 232SHS 3000 200184 859.00 £ 232SHS 3600 200185 913.00 £ 233SHS 4200 200186 987.00 £ 233SHS 4800 200187 1,043.00 £ 233SHZ 100 S (GB) 232786 1,152.00 £ 66SHZ 150 S (GB) 232788 1,260.00 £ 66SHZ 30 S (GB) 232783 1,071.00 £ 66SHZ 50 S (GB) 232784 1,112.00 £ 66SK 2 236693 105.00 £ 103nSNE 5 t ECO GB 202135 201.00 £ 46SNO 10 Plus (GB) 204984 240.00 £ 52SNO 5 Plus (GB) 204979 183.00 £ 52SNU 10 Plus (GB) 204981 206.00 £ 48SNU 10 Plus GB + WST-W 205849 331.00 £ 51SNU 5 Plus (GB) 204971 193.00 £ 48SNU 5 Plus GB + WST-W 205848 316.00 £ 50SP VLR 70 RF COARSE 30 G2-4 239562 13.00 £ 227SP VLR 70 RF COARSE 60 G4-4 239575 30.00 £ 227SP VLR 70 RF EPM1 50 F7-4 239577 36.00 £ 227SP VLR 70 RF EPM1 80 F9-4 201274 33.00 £ 227SP VLR 70 RF EPM10 50 M5-4 239576 33.00 £ 228STB-FB 233711 43.00 £ 192STH 210 C Plus 205369 930.00 £ 174STH 415 C Plus 205370 1,126.00 £ 174STH 720 Plus 203765 1,821.00 £ 175STH 720-1 Plus 203766 2,026.00 £ 175Service tool CNS 203981 789.00 £ 256T TAF PT 2m 235996 31.00 £ 133, 141TWS-W 205613 77.00 £ 57U UBS-RL 238490 490.00 £ 172UBS-VL 238489 484.00 £ 172ULTRONIC Plus 205632 311.00 £ 269ULTRONIC Premium 205633 364.00 £ 268UP 25-60-180 056899 287.00 £ 186UP 25/1-8 PCV 205285 416.00 £ 187UP 25/7.5 PCV 201620 204.00 £ 187UP 30/1-8 PCV 205286 416.00 £ 187UP 40/1-8 E 206633 1,479.00 £ 187UP 50/1-12 E 206636 1,887.00 £ 187UP-Kit EU 200016 12.00 £ 38UPF 30/1-8 E 232532 653.00 £ 128UPF 40/1-8 E 227413 1,625.00 £ 128UPF 50/1-12 E 227414 2,031.00 £ 128UPZ 233719 334.00 £ 186UVK (SH/SHC) 236702 206.00 £ 62UVK (SH/SHU/SHC) 236701 206.00 £ 62V VLR 70 L Trend EU 203133 316.00 £ 216VLR 70-2 CU 239570 225.00 £ 225VLR 70-4 CU 239571 234.00 £ 225VLR 70-8 CU 239572 246.00 £ 225lVRC-W 450 E Premium 204941 3,180.00 £ 200, 202lVRC-W 450 Premium 204940 2,695.00 £ 196, 198lVRC-W 600 E Premium 204715 3,680.00 £ 200, 202

Page 8

Table of contentsAlphabetic directoryProduct information 2025 - Subject to technical modiﬁcations.8Type Mat. no. Price PagelVRC-W 600 Premium 204714 3,195.00 £ 196, 198W WDH 1000 SBP 231929 781.00 £ 180WDH 1001 SBS 231927 870.00 £ 172WDH 1500 SBP 231930 896.00 £ 180WDH 1501 SBS 231928 986.00 £ 172WDH 601 SBS 231925 725.00 £ 172WDH 801 SBS 231926 752.00 £ 172WK 1.1 238686 204.00 £ 103WK 2 234722 490.00 £ 102lWLAN VRC .1 206611 103.00 £ 207WPE 234725 875.00 £ 139WPE-I 04 HK 230 Premium 202615 8,682.00 £ 113, 116WPE-I 04 HW 230 GB Premium 202637 9,839.00 £ 108WPE-I 06 HK 230 Premium 238614 8,787.00 £ 113, 116WPE-I 06 HW 230 GB Premium 202638 9,944.00 £ 108lWPE-I 07.1 Plus H 230 207183 9,286.00 £ 118, 120WPE-I 08 HK 230 Premium 238615 9,286.00 £ 113, 116WPE-I 08 HW 230 GB Premium 202639 10,444.00 £ 108WPE-I 12 HK 230 Premium 238616 10,751.00 £ 113, 116WPE-I 12 HW 230 GB Premium 202640 11,910.00 £ 108lWPE-I 12.1 Plus H 230 207184 10,751.00 £ 118, 120WPE-I 15 HK 230 Premium 238617 12,808.00 £ 113, 116WPE-I 15 HW 230 GB Premium 202641 12,692.00 £ 108WPE-I 33 H 400 Premium 201412 22,564.00 £ 121, 124WPE-I 44 H 400 Premium 201413 25,069.00 £ 121, 124WPE-I 59 H 400 Premium 201414 28,831.00 £ 121, 124WPE-I 87 H 400 Premium 201415 33,844.00 £ 121, 124WPKI 5-I 205875 478.00 £ 178WPKI 6-I 205876 280.00 £ 179WPKI-HK DN 25 206627 540.00 £ 187WPKI-HKM 230 DN 25 206631 570.00 £ 189WPKI-HKM 24 DN 32 206628 1,550.00 £ 188WPKI-HKM 24 DN 40 206632 3,508.00 £ 188WPKI-HKV 2 206638 308.00 £ 189WPKI-HKV 3 206637 415.00 £ 190WPL 25 ACS 236643 6,579.00 £ 89, 91WPL-A 07 HK 230 Premium 200123 5,100.00 £ 80, 82nWPM 234727 587.00 £ 138WPSF 233307 313.00 £ 128WRV 32 232628 151.00 £ 168WRV 40 232629 273.00 £ 168WST-W parts kit SNU GB 227726 127.00 £ 56WUT-K 205615 127.00 £ 56lWorking hours 1009995 100.00 £ 274Z ZLA 100-H 205830 98.00 £ 219ZLWE CO2 236673 204.00 £ 225ZLWE HUMIDITY 236674 148.00 £ 226ZWSK 182101 34.00 £ 237ZWVK 1 182028 111.00 £ 236ZWVK 2 182102 111.00 £ 236Zhzg. 0,35kW 238723 70.00 £ 236Zhzg. 0,5kW 238724 70.00 £ 236Zhzg. 0,8kW 238725 77.00 £ 236Zhzg. 1,2kW 238727 81.00 £ 236Zhzg. 1,5kW 238728 92.00 £ 236Zhzg. 1,7kW 238915 92.00 £ 236Zhzg. 1kW 238726 77.00 £ 236

Page 9

Table of contents Product range directoryTable of contentsProduct range directoryProduct information 2025 - Subject to technical modiﬁcations. 9 Comfort instantaneous water heaterFull electronic controlType Mat. no. Price PageDHE 18/21/24 Set 204284 990.00 £ 20DHE 27 Set 204285 1,005.00 £ 20Electronic closed-loop controlType Mat. no. Price PageDHB-E 18/21/24 Set 203866 640.00 £ 22DHB-E 27 LCD Set 203865 653.00 £ 22 Compact instantaneous water heaters, 1-phaseFull electronic controlType Mat. no. Price PageDCE-X 6/8 Premium 238158 428.00 £ 26DCE-X 10/12 Premium 238159 451.00 £ 26Electronic closed-loop controlType Mat. no. Price PageDCE-S 6/8 Plus 238153 377.00 £ 28DCE-S 10/12 Plus 238154 401.00 £ 28 Mini instantaneous water heatersElectronic closed-loop controlType Mat. no. Price PageDEM 3 Set 236584 308.00 £ 32DEM 4 Set 236462 308.00 £ 32DEM 6 Set 236463 308.00 £ 32 Taps for instantaneous water heatersTaps for mini instantaneous water heatersType Mat. no. Price PageMAZ 205621 100.00 £ 36 Accessories for instantaneous water heatersAccessories for compact instantaneous water heatersType Mat. no. Price PageUP-Kit EU 200016 12.00 £ 38 Automatic water boilersUndersinkType Mat. no. Price PageHOT 2.6 N 1600 Premium + 3in1 N3 c 203882 579.00 £ 42HOT 2.6 N 1600 Premium + 3in1 N4 b 203883 659.00 £ 42 Small water heaters, non-pressurisedUndersinkType Mat. no. Price PagenSNE 5 t ECO GB 202135 201.00 £ 46SNU 5 Plus (GB) 204971 193.00 £ 48SNU 10 Plus (GB) 204981 206.00 £ 48SNU 5 Plus GB + WST-W 205848 316.00 £ 50SNU 10 Plus GB + WST-W 205849 331.00 £ 51OversinkType Mat. no. Price PageSNO 5 Plus (GB) 204979 183.00 £ 52SNO 10 Plus (GB) 204984 240.00 £ 52 Accessories for small water heaters and DHW cylinders, non-pressurisedTaps, undersinkType Mat. no. Price PageWUT-K 205615 127.00 £ 56WST-W parts kit SNU GB 227726 127.00 £ 56TWS-W 205613 77.00 £ 57MAE-K 205616 77.00 £ 57 Small water heaters, pressurisedUndersinkType Mat. no. Price PageSH 15 SL GB Set AX 227692 442.00 £ 60 Accessories for small water heaters, pressurisedAccessoriesType Mat. no. Price PageUVK (SH/SHU/SHC) 236701 206.00 £ 62UVK (SH/SHC) 236702 206.00 £ 62 Wall mounted cylinderPressurisedType Mat. no. Price PageSHZ 30 S (GB) 232783 1,071.00 £ 66SHZ 50 S (GB) 232784 1,112.00 £ 66SHZ 100 S (GB) 232786 1,152.00 £ 66SHZ 150 S (GB) 232788 1,260.00 £ 66 Floor mounted cylinderElectric ﬂoor mounted cylinders, pressurisedType Mat. no. Price PageESH 120 F Trend GB 204791 712.00 £ 70ESH 150 F Trend GB 204792 854.00 £ 70ESH 180 F Trend GB 204793 890.00 £ 70ESH 210 F Trend GB 204794 930.00 £ 70ESH 250 F Trend GB 204795 1,011.00 £ 70ESH 300 F Trend GB 204796 1,102.00 £ 70 Accessories for SBB ﬂoor mounted cylinders, pressurisedElectric threaded immersion heaters and ﬂanged immersion heatersType Mat. no. Price PageFCR 21/60 071330 1,032.00 £ 72FCR 21/120 E 071331 978.00 £ 72FCR 28/120 E 000694 1,105.00 £ 72FCR 28/180 E 000695 1,117.00 £ 72BGC 6 kW 500 mm ET 003769 267.00 £ 72BGC/45 075115 280.00 £ 72

Page 10

Table of contentsProduct range directoryProduct information 2025 - Subject to technical modiﬁcations.10 Air source heat pumps, outdoor installation – inverterInverterType Mat. no. Price PageWPL-A 07 HK 230 Premium 200123 5,100.00 £ 80ASHP 7.5kW Premium / 300 Premium Compact Pack204907 12,119.00 £ 85ASHP 7.5kW Premium / 300 Pack 204908 10,130.00 £ 86ASHP 7.5kW Premium / 225 Plus Compact Pack206044 10,099.00 £ 87WPL 25 ACS 236643 6,579.00 £ 89ASHP 14.8kW / 225 Plus Compact Pack 206042 11,578.00 £ 93ASHP 14.8kW / 300 Premium Compact Pack204912 13,598.00 £ 94ASHP 14.8kW / 300 Pack 204913 11,609.00 £ 95ASHP 8.5kW / 200 Plus Compact Pack 206043 8,537.00 £ 96HPA-O 8 CS Plus int 239171 3,417.00 £ 97 Accessories for air source heat pumps installed outdoorsInstallation accessoriesType Mat. no. Price PageAS-WP 2 233623 114.00 £ 102WK 2 234722 490.00 £ 102WK 1.1 238686 204.00 £ 103SK 2 236693 105.00 £ 103 Ground source heat pumps – inverterInverterType Mat. no. Price PageWPE-I 04 HW 230 GB Premium 202637 9,839.00 £ 108WPE-I 06 HW 230 GB Premium 202638 9,944.00 £ 108WPE-I 08 HW 230 GB Premium 202639 10,444.00 £ 108WPE-I 12 HW 230 GB Premium 202640 11,910.00 £ 108WPE-I 15 HW 230 GB Premium 202641 12,692.00 £ 108GSHP 8kW / 175 Compact Pack 204401 13,083.00 £ 110GSHP 12kW / 162 Compact Pack 204403 14,549.00 £ 110GSHP 15kW / 162 Compact Pack 204408 15,331.00 £ 110GSHP 8kW / 300 Pack 204402 14,116.00 £ 111GSHP 12kW / 300 Pack 204407 15,581.00 £ 111GSHP 15kW / 300 Pack 204404 17,638.00 £ 111WPE-I 04 HK 230 Premium 202615 8,682.00 £ 113WPE-I 06 HK 230 Premium 238614 8,787.00 £ 113WPE-I 08 HK 230 Premium 238615 9,286.00 £ 113WPE-I 12 HK 230 Premium 238616 10,751.00 £ 113WPE-I 15 HK 230 Premium 238617 12,808.00 £ 113lWPE-I 12.1 Plus H 230 207184 10,751.00 £ 118lWPE-I 07.1 Plus H 230 207183 9,286.00 £ 120WPE-I 33 H 400 Premium 201412 22,564.00 £ 121WPE-I 44 H 400 Premium 201413 25,069.00 £ 121WPE-I 59 H 400 Premium 201414 28,831.00 £ 121WPE-I 87 H 400 Premium 201415 33,844.00 £ 121 Accessories for ground source heat pumpsAccessoriesType Mat. no. Price PageUPF 30/1-8 E 232532 653.00 £ 128UPF 40/1-8 E 227413 1,625.00 £ 128UPF 50/1-12 E 227414 2,031.00 £ 128WPSF 233307 313.00 £ 128lDWS1 221382 91.00 £ 129MAG 12 235218 69.00 £ 129MAG 18 235219 77.00 £ 129MAG 25 235220 91.00 £ 129MAG 50 235221 137.00 £ 129FS-WP 22 233511 78.00 £ 130FS-WP 28 233512 134.00 £ 130EM 33-87 201715 471.00 £ 130EMW 202062 575.00 £ 131HG Set 33-87 201716 558.00 £ 131FEG 201767 227.00 £ 132FEW 202099 352.00 £ 132TAF PT 2m 235996 31.00 £ 133lAWG 80 207743 515.00 £ 133lAHP-TC 207744 140.00 £ 134lAHP-PH 207742 200.00 £ 134 Control unitsControllerType Mat. no. Price PagenWPM 234727 587.00 £ 138WPE 234725 875.00 £ 139ConnectivityType Mat. no. Price PageISG web 229336 889.00 £ 140Controller accessoriesType Mat. no. Price PageFET 234723 253.00 £ 141TAF PT 2m 235996 31.00 £ 141Energy managementType Mat. no. Price PagelEM Meter 201675 454.00 £ 142lEM Trend 337397 75.00 £ 142Individual room controlType Mat. no. Price PageEZE 237737 225.00 £ 143lEZE CNS Connect 207642 249.00 £ 144ESS 237739 661.00 £ 145EHF 237736 284.00 £ 145EFS 237740 28.00 £ 146ERT 237738 65.00 £ 146ERS 237741 114.00 £ 147lERE UK 207643 110.00 £ 148EIL 237744 55.00 £ 148EIW 237745 75.00 £ 149EAD 237742 22.00 £ 149

Page 11

Table of contentsProduct range directoryProduct information 2025 - Subject to technical modiﬁcations. 11 Accessories for hydraulic modulesAccessoriesType Mat. no. Price PageAS-HM Trend 233750 169.00 £ 152 Integral cylinderWith integral buffer cylinderType Mat. no. Price PageHSBC 300 cool (GB) Set 204651 5,743.00 £ 154HSBC 200 S (GB) Set 236917 3,723.00 £ 155HSBC 225 S 1 206045 3,723.00 £ 156HSBC 220 206641 3,900.00 £ 157 Accessories for integral cylindersAccessoriesType Mat. no. Price PageHSBC-HKM 234648 612.00 £ 160HSBC 3-HKM 238825 605.00 £ 160RBS-SBC 238827 284.00 £ 160CDT 180 204642 296.00 £ 161 DHW cylinderDHW cylinderType Mat. no. Price PageSBB 302 WP (GB) Set 228945 2,506.00 £ 164SBB 401 WP SOL (GB) Set 228946 2,777.00 £ 164SBB 501 WP SOL (GB) Set 228947 3,046.00 £ 164SBB 300-1 Plus GB 202923 1,489.00 £ 165SBB 400-1 Plus GB 202924 1,557.00 £ 165SBB 500-1 Plus GB 202925 1,919.00 £ 165lSBB 300 Trend 206187 1,683.00 £ 165 Accessories for DHW cylindersAccessoriesType Mat. no. Price PageWRV 32 232628 151.00 £ 168WRV 40 232629 273.00 £ 168 Instantaneous water cylinderInstantaneous water cylinderType Mat. no. Price PageSBS 1001 W Set 236483 3,858.00 £ 170SBS 1501 W Set 236484 4,872.00 £ 170SBS 601 W Set 236481 3,046.00 £ 170SBS 801 W Set 236482 3,452.00 £ 170 Accessories for instantaneous water cylindersAccessoriesType Mat. no. Price PageWDH 601 SBS 231925 725.00 £ 172WDH 801 SBS 231926 752.00 £ 172WDH 1001 SBS 231927 870.00 £ 172WDH 1501 SBS 231928 986.00 £ 172UBS-RL 238490 490.00 £ 172UBS-VL 238489 484.00 £ 172 Buffer cylinderBuffer cylinderType Mat. no. Price PagelSBP 100 classic 235200 536.00 £ 174STH 210 C Plus 205369 930.00 £ 174STH 415 C Plus 205370 1,126.00 £ 174STH 720 Plus 203765 1,821.00 £ 175STH 720-1 Plus 203766 2,026.00 £ 175SBP 1000 E 227564 1,972.00 £ 176SBP 1000 E SOL 227566 2,087.00 £ 176SBP 1500 E 227565 2,073.00 £ 176SBP 1500 E SOL 227567 3,059.00 £ 176 Accessories for buffer cylindersAccessoriesType Mat. no. Price PageWPKI 5-I 205875 478.00 £ 178BBI 5-I 205877 151.00 £ 178WPKI 6-I 205876 280.00 £ 179ET SBP 003711 71.00 £ 179WDH 1000 SBP 231929 781.00 £ 180WDH 1500 SBP 231930 896.00 £ 180 Additional accessoriesElectric threaded immersion heaters and ﬂanged immersion heatersType Mat. no. Price PageBGC 6 kW 500 mm ET 003769 267.00 £ 182BGC/45 075115 280.00 £ 182FCR 28/120 E 000694 1,105.00 £ 182FCR 28/180 E 000695 1,117.00 £ 182FCR 21/60 071330 1,032.00 £ 182FCR 21/120 E 071331 978.00 £ 182 Heat pump accessoriesDHW heatingType Mat. no. Price PageUPZ 233719 334.00 £ 186UP 25-60-180 056899 287.00 £ 186Heating system hydraulicsType Mat. no. Price PageUP 25/7.5 PCV 201620 204.00 £ 187UP 25/1-8 PCV 205285 416.00 £ 187UP 30/1-8 PCV 205286 416.00 £ 187UP 40/1-8 E 206633 1,479.00 £ 187UP 50/1-12 E 206636 1,887.00 £ 187WPKI-HK DN 25 206627 540.00 £ 187WPKI-HKM 24 DN 32 206628 1,550.00 £ 188WPKI-HKM 24 DN 40 206632 3,508.00 £ 188WPKI-HKM 230 DN 25 206631 570.00 £ 189WPKI-HKV 2 206638 308.00 £ 189WPKI-HKV 3 206637 415.00 £ 190HUV 1 227420 347.00 £ 190HUV 2 223391 768.00 £ 190HUK 100 Set 203711 1,983.00 £ 191

Page 12

Table of contentsProduct range directoryProduct information 2025 - Subject to technical modiﬁcations.12HUK 125 Set 203712 2,075.00 £ 191HUK 150 Set 203713 3,692.00 £ 191HUK 200 Set 203714 4,333.00 £ 191FSHP-L45 202779 672.00 £ 191Additional accessoriesType Mat. no. Price PageSTB-FB 233711 43.00 £ 192 Central ventilation unitsSupply and extract air with heat recovery, wall mountingType Mat. no. Price PagelVRC-W 450 Premium 204940 2,695.00 £ 196lVRC-W 600 Premium 204714 3,195.00 £ 196lVRC-W 450 E Premium 204941 3,180.00 £ 200lVRC-W 600 E Premium 204715 3,680.00 £ 200 Accessories, central ventilation unitsControllersType Mat. no. Price PagelFEB 2.0 205018 119.00 £ 206lFEB 2.1 206612 171.00 £ 206lWLAN VRC .1 206611 103.00 £ 207FilterType Mat. no. Price PagelFMS EPMC 65-10 W450/600 206610 121.00 £ 208lFMK EPM1 55-2 W450/600 206596 45.00 £ 208lFMK EPA 12-2 W450/600 206597 53.00 £ 209 Distribution system for integral and central ventilationLVS inﬂoorType Mat. no. Price PagelLVS VTS 6 201456 459.00 £ 212lLVS VTS 9 234493 550.00 £ 212 Decentralised ventilation in residential buildingsSupply and extract air with heat recoveryType Mat. no. Price PageVLR 70 L Trend EU 203133 316.00 £ 216Extract air without heat recoveryType Mat. no. Price PageLA 100 A 205771 341.00 £ 218ZLA 100-H 205830 98.00 £ 219LA 100 G-A 205906 49.00 £ 219LA 100 VE 205907 292.00 £ 220LWF W 100 VA - 60 231104 105.00 £ 220FMS G3-5 LA 60 201455 14.00 £ 221 Accessories for decentralised ventilation in residential buildingsIndividual component for heat recoveryType Mat. no. Price PagelDUCT VLR 70 S 203140 13.00 £ 224Accessories for controllersType Mat. no. Price PageZLWE CO2 236673 204.00 £ 225VLR 70-2 CU 239570 225.00 £ 225VLR 70-4 CU 239571 234.00 £ 225VLR 70-8 CU 239572 246.00 £ 225ZLWE HUMIDITY 236674 148.00 £ 226FilterType Mat. no. Price PageSP VLR 70 RF COARSE 30 G2-4 239562 13.00 £ 227SP VLR 70 RF EPM1 80 F9-4 201274 33.00 £ 227SP VLR 70 RF EPM1 50 F7-4 239577 36.00 £ 227SP VLR 70 RF COARSE 60 G4-4 239575 30.00 £ 227SP VLR 70 RF EPM10 50 M5-4 239576 33.00 £ 228 Storage heatersSlimline storage heaterType Mat. no. Price PageSHS 1200 200181 723.00 £ 232SHS 1800 200182 743.00 £ 232SHS 2400 200183 804.00 £ 232SHS 3000 200184 859.00 £ 232SHS 3600 200185 913.00 £ 233SHS 4200 200186 987.00 £ 233SHS 4800 200187 1,043.00 £ 233 Accessories for storage heatersAccessoriesType Mat. no. Price PageZhzg. 0,35kW 238723 70.00 £ 236Zhzg. 0,5kW 238724 70.00 £ 236Zhzg. 0,8kW 238725 77.00 £ 236Zhzg. 1kW 238726 77.00 £ 236Zhzg. 1,2kW 238727 81.00 £ 236Zhzg. 1,5kW 238728 92.00 £ 236Zhzg. 1,7kW 238915 92.00 £ 236ZWVK 1 182028 111.00 £ 236ZWVK 2 182102 111.00 £ 236ZWSK 182101 34.00 £ 237BSW 230 200166 14.00 £ 237 ConvectorsWall installationType Mat. no. Price PageCON 5 Premium U 201278 259.00 £ 244CON 10 Premium U 200268 267.00 £ 244CON 15 Premium U 200269 273.00 £ 244CON 20 Premium U 200270 280.00 £ 244CON 30 Premium U 200276 376.00 £ 244CNS 50 Connect UK 205639 223.00 £ 245CNS 75 Connect UK 205640 230.00 £ 245

Page 13

Table of contentsProduct range directoryProduct information 2025 - Subject to technical modiﬁcations. 13CNS 100 Connect UK 205641 237.00 £ 245CNS 150 Connect UK 205642 268.00 £ 245CNS 200 Connect UK 205643 275.00 £ 246CNS 250 Connect UK 205644 315.00 £ 246CNS 300 Connect UK 205645 325.00 £ 246CNS-U 500 Plus LCD (UK) 205867 166.00 £ 247CNS-U 750 Plus LCD (UK) 205868 170.00 £ 247CNS-U 1000 Plus LCD (UK) 205869 176.00 £ 247CNS-U 1500 Plus LCD (UK) 205870 197.00 £ 247CNS-U 2000 Plus LCD (UK) 205871 204.00 £ 247CNS-U 2500 Plus LCD (UK) 205872 232.00 £ 247CNS-U 3000 Plus LCD (UK) 205873 240.00 £ 247CNS 50 Trend UK 236559 166.00 £ 249CNS 75 Trend UK 236560 170.00 £ 249CNS 100 Trend UK 236561 177.00 £ 249CNS 150 Trend UK 236562 197.00 £ 249CNS 250 Trend UK 236564 232.00 £ 249CNS 200 Trend NC 202005 204.00 £ 250CNS 50 Trend NC 202001 166.00 £ 250CNS 75 Trend NC 202002 170.00 £ 250CNS 100 Trend NC 202003 177.00 £ 250CNS 150 Trend NC 202004 197.00 £ 250Floorstanding appliancesType Mat. no. Price PagelCNS 2000 Plus LCD Move (UK) 207061 204.00 £ 251lCNS-B 2000 Plus LCD Move (UK) 207069 204.00 £ 251 Duo convectorsWall installationType Mat. no. Price PageCND 75 234813 341.00 £ 254CND 100 234814 401.00 £ 254CND 150 234815 464.00 £ 254CND 200 234816 512.00 £ 254 Accessories for convectorsAccessoriesType Mat. no. Price PageService tool CNS 203981 789.00 £ 256 Rapid heaterRapid heaterType Mat. no. Price PageCK 20 Premium 237835 226.00 £ 260CK 20 Trend LCD 236653 151.00 £ 261 Bathroom radiatorTowel railsType Mat. no. Price PageBHE 50 Plus 239141 390.00 £ 262BHE 75 Plus 238713 520.00 £ 262BHE 100 Plus 238714 627.00 £ 262BHE 175 T Plus 238715 677.00 £ 262 Infrared wall mounted radiant heaterIndoorType Mat. no. Price PageIW 120 229339 66.00 £ 263 Hand dryer, high speedHigh speedType Mat. no. Price PageULTRONIC Premium 205633 364.00 £ 268ULTRONIC Plus 205632 311.00 £ 269

Page 14

Table of contents Successor directoryTable of contentsNew and discontinued productsProduct information 2025 - Subject to technical modiﬁcations.14Small water heaters, non-pressurisedUndersinkPhase out Mat. no.Available untilPage StartProduct numberAvailable fromPageSNE 5 t ECO GB 202135 12.2024 46 Ground source heat pumps – inverterInverterPhase out Mat. no.Available untilPage StartProduct numberAvailable fromPage WPE-I 12.1 Plus H 230207184 01.2025 118 WPE-I 07.1 Plus H 230207183 01.2025 118 Accessories for ground source heat pumpsAccessoriesPhase out Mat. no.Available untilPage StartProduct numberAvailable fromPage DWS1 221382 07.2024 129 AWG 80 207743 01.2025 133 AHP-TC 207744 01.2025 134 AHP-PH 207742 01.2025 134 Control unitsControllerPhase out Mat. no.Available untilPage StartProduct numberAvailable fromPageWPM 234727 06.2025 138 Energy managementPhase out Mat. no.Available untilPage StartProduct numberAvailable fromPage EM Meter 201675 01.2025 142EM Trend 337397 01.2025 142Individual room controlPhase out Mat. no.Available untilPage StartProduct numberAvailable fromPage EZE CNS Connect 207642 10.2024 144 ERE UK 207643 10.2024 148 DHW cylinderDHW cylinderPhase out Mat. no.Available untilPage StartProduct numberAvailable fromPage SBB 300 Trend 206187 07.2024 165 Buffer cylinderBuffer cylinderPhase out Mat. no.Available untilPage StartProduct numberAvailable fromPage SBP 100 classic 235200 01.2025 174 Central ventilation unitsSupply and extract air with heat recovery, wall mountingPhase out Mat. no.Available untilPage StartProduct numberAvailable fromPage VRC-W 450 Premium204940 01.2025 198 VRC-W 600 Premium204714 01.2025 198 VRC-W 450 E Premium204941 01.2025 202 VRC-W 600 E Premium204715 01.2025 202 Accessories, central ventilation unitsControllersPhase out Mat. no.Available untilPage StartProduct numberAvailable fromPage FEB 2.1 206612 01.2025 206 FEB 2.0 205018 01.2025 206 WLAN VRC .1 206611 01.2025 207FilterPhase out Mat. no.Available untilPage StartProduct numberAvailable fromPage FMS EPMC 65-10 W450/600206610 01.2025 208 FMK EPM1 55-2 W450/600206596 01.2025 208 FMK EPA 12-2 W450/600206597 01.2025 209 Distribution system for integral and central ventilationLVS inﬂoorPhase out Mat. no.Available untilPage StartProduct numberAvailable fromPage LVS VTS 9 234493 01.2025 212 LVS VTS 6 201456 01.2025 212 Accessories for decentralised ventilation in residential buildingsIndividual component for heat recoveryPhase out Mat. no.Available untilPage StartProduct numberAvailable fromPage DUCT VLR 70 S 203140 07.2024 224 ConvectorsFloorstanding appliancesPhase out Mat. no.Available untilPage StartProduct numberAvailable fromPage CNS-B 2000 Plus LCD Move (UK)207069 10.2024 251 CNS 2000 Plus LCD Move (UK)207061 10.2024 251

Page 15

Page 16

Page 17

Page 18

Comfort instantaneous water heater Application areasComfort instantaneous water heaterApplication areas18Product information 2025 - Subject to technical modiﬁcations. Rated output: Please note the rated output and fuse protection when selecting an instantaneous water heater Starting flow rate: Please note the starting flow rate of the instantaneous water heater when selecting your fitting kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 l/min 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 2,2 2,3 2,4 2,5 2,6 2,7 2,8 2,9 3,0 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4,0 4,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5,0 DHE 18/21/24 Set DHE 27 Set kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 l/min 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 2,2 2,3 2,4 2,5 2,6 2,7 2,8 2,9 3,0 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4,0 4 ,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5,0 DHB-E 18/21/24 Set DHB-E 27 LCD Set

Page 19

Page 20

next page >Comfort instantaneous water heater Full electronic controlComfort instantaneous water heaterFull electronic control20Product information 2025 - Subject to technical modiﬁcations.DHE SetBeneﬁts › Maximum energy efﬁciency and accurate temperature delivery at all times thanks to fully electronic output control with 4i technol-ogy › The temperature can be permanently restricted by the installer to 55, 50 or 43°C; the temperature can be further restricted by the user (childprooﬁng) › Greater convenience when installed undersink, since the appliance cover and the programming unit can be turned the other way up › Optimum energy efﬁciency through selectable ECO mode › Consumption indicator for transparent costs › Quick temperature selection with two memory buttons › Safe operation thanks to extensive range of convenience and safety functions › Easy operation via large, illuminated multifunction display › Suitable for reheating preheated water › Quick installation with Proﬁ-Rapid, the innovative installation concept › Adjustable connected load for ﬂexibility in use (Product: 204284) › Highly ﬂexible installation thanks to selectable appliance output – 18/21/24 kW in a single appliance (Product: 204284)Application • This comfort instantaneous water heater is suitable for supplying DHW simultaneously to multiple draw-off points, for example the bathroom and the kitchen. • The sealed, pressure-tested appliance can be combined with all commercially available pressure taps.Application • This fully electronically controlled instantaneous water heater with 4i technology ensures accurate temperature delivery at all times thanks to electronic ﬂow rate control. • Variable, digital temperature selection via rotary selector, temperature adjustment in 0.5 °C increments. • Backlit multifunction display to show values such as set temperature, current power consumption, energy consumption, ﬂow rate, time, status and service information. ECO function. Two memory buttons for programmable preferred temperatures. • Four wellness shower programs, automated bath ﬁlling. • LED indicator warns of scalding at temperatures above 43 °C or when there are unexpect-edly high outlet temperatures due to preheated water, for example from a solar thermal system. Inlet temperature displayed in lower section. • Individually adjustable temperature limit (childprooﬁng). • Convenient remote control available as an option. • To ensure consistently high ease of use in undersink installations, the appliance cover and programming unit can be rotated.Efﬁciency • Energy and water savings of up to 30 % through full electronic output control with 4i technology. Three sensors and an additional motorised valve ensure that the set temperature is achieved to the exact degree at all times. Only the amount of energy required is expended; there is no need to add cold water at the tap. This ensures maximum energy efﬁciency. • Individually selectable ECO mode for particularly economical operation. The display gives details of savings actually made and further possible savings. • Suitable for preheated water from solar thermal and heat pump systems.Installation • Proﬁ-Rapid installation system for even quicker and easier installation. Straightforward replacement for all standard instantaneous water heaters. Simple wall mounting: universal mounting rail with integrated compen-sation for any unevenness in the wall and drill hole discrepancies; suitable for commonly used ﬁxing points. • Quick and universal water connection: enlarged installation area with pivoting cold water inlet, threaded water ﬁttings, twin nipple for easy replacement, surface/ﬂush mounting with 3-way shut-off, suitable for plastic pipes (observe manufacturer‘s instructions). • Straightforward mains connection: from above or below; cable insertion aid. • Fault memory can be called up on the display for fault analysis, plus LED diagnostic trafﬁc light. • The internal assembly can be removed with just one hand movement.Safety • Quick-action bare wire heating system, suitable for hard and soft water. • Electronic safety concept with air detection. • Anti-scalding protection with permanent limitation of the water outlet temperature is set by an installer.DHE 18/21/24 Set DHE 18/21/24 Set DHE 27 SetPart number 204284 204285Price excl. VAT £ 990.00 1,005.00 Specification Rated voltage V 400 400Rated voltage 1 V 380 380Rated voltage 2 V 400 400

Page 21

Comfort instantaneous water heaterFull electronic control21Product information 2025 - Subject to technical modiﬁcations. DHE 18/21/24 Set DHE 27 SetRated voltage 3 V 415 Rated output kW 18/21/24 27Rated output 1 kW 16,2/19/21,7 24,4Rated output 2 kW 18/21/24 27Rated output 3 kW 19,4/22,6/25,8 Rated current A 29/31/35 39Rated current 1 A 27,6/29,5/33,3 37,1Rated current 2 A 29/31/35 39Rated current 3 A 30,1/32,2/36,3 Fuse protection A 32/32/35 40Fuse protection 1 A 32/32/35 40Fuse protection 2 A 32/32/35 40Fuse protection 3 A 32/32/40 Frequency Hz 50/60 50/-Frequency 1 Hz 50/60 50/-Frequency 2 Hz 50/60 50/-Frequency 3 Hz 50/- Phases 3/PE 3/PEConductivity σ15 ≤ μS/cm 1111 1111Resistivity ρ15 ≥ Ω cm 900 900Switch-on water flow rate l/min >2,5 >2,5IP rating IP25 IP25Temperature setting °C Off, 20-60 Off, 20-60Colour white whiteHeight mm 466 466Width mm 225 225Depth mm 116 116Weight kg 3.10 3.10Energy efficiency class A AIncl.connector / adaptor for 1/2“ ﬁtting onto 15 mm solder ﬁtting (239550).

Page 22

next page >Comfort instantaneous water heater Electronic closed-loop controlComfort instantaneous water heaterElectronic closed-loop control22Product information 2025 - Subject to technical modiﬁcations.DHB-E LCD SetBeneﬁts › Greater convenience when installed undersink, since the appliance cover and the programming unit can be turned the other way up › Precise temperature selection via rotary selector › Suitable for preheated water up to 55°C with reheating and up to a maximum of 70°C without reheating. › Temperature shown on the LCD screen › Maximum energy efﬁciency and accurate temperature delivery with 3i technology and electronic closed-loop control › Quick installation with PROFI-RAPID › High safety level as anti-scalding protection can be permanently activated › Highly ﬂexible installation thanks to selectable appliance output – 18/21/24 kW in a single appliance (Product: 203866)Application • This comfort instantaneous water heater is suitable for DHW supply to multiple draw-off points (individu-al and group supply), for example for simultaneous supply to the bathroom and kitchen. • The sealed, pressure-tested appliance can be used with all commercially available pressure taps.Convenience features • The instantaneous water heater with electronic closed-loop control via 3i technology ensures accurate temperature delivery up to the maximum output. • Variable, digital temperature selection via the rotary selector. • LCD screen for temperature display; convenient remote control available as an option. • The rotatable appliance cover and programming unit ensure ease of use in undersink installations.Efﬁciency • Energy and water savings of up to 30 % are achieved with the electronic output control with 3i technology. 3 sensors ensure that the set temperature is achieved to the exact degree. For this, only the amount of energy actually required is expended. There is no need to add cold water at the tap, which leads to very good energy efﬁciency. • Suitable for preheated water, for example from solar thermal and heat pump systems.Installation • The improved PROFI-RAPID installation system ensures quick and easy installation. • Straightforward replacement for all standard instantaneous water heaters. • Simple wall mounting with the universal mounting rail. It compensates for any wall unevenness and drill hole discrepancies, and is also suitable for commonly used ﬁxing points. • Quick and universal water connection thanks to enlarged installation area with pivoting cold water inlet, threaded water ﬁttings, twin nipple for easy replacement, surface/ﬂush mounting with 3-way shut-off, suitable for plastic pipes (observe manufacturer‘s instructions). Straightforward mains connection from above or below; cable insertion aid.Service • Rapid fault analysis with integral LED diagnostic trafﬁc light. • The internal assembly can be removed with just one hand movement.Safety • The quick-action bare wire heating system is suitable for hard and soft water. • The electronic safety concept is equipped with air detection. • To permanently limit the water outlet temperature, an installer can set anti-scalding protection.DHB-E 18/21/24 Set DHB-E 18/21/24 Set DHB-E 27 LCD SetPart number 203866 203865Price excl. VAT £ 640.00 653.00 Specification Rated voltage V 400 400Rated voltage 1 V 380 380Rated voltage 2 V 400 400Rated voltage 3 V 415 Rated output kW 18/21/24 27Rated output 1 kW 16,2/19/21,7 24,4Rated output 2 kW 18/21/24 27Rated output 3 kW 19,4/22,6/25,8 19,4/22,6/25,8Rated current A 29/31/35 39Rated current 1 A 27,6/29,5/33,3 37,1Rated current 2 A 29/31/35 39Rated current 3 A 30,1/32,2/36,3 30,1/32,2/36,3Fuse protection A 32/32/35 40Fuse protection 1 A 32/32/35 40Fuse protection 2 A 32/32/35 40

Page 23

Page 24

Compact instantaneous water heaters, 1-phaseApplication areasCompact instantaneous water heaters, 1-phaseApplication areas24Product information 2025 - Subject to technical modiﬁcations. Rated output: Please note the rated output and fuse protection when selecting an instantaneous water heater Starting flow rate: Please note the starting flow rate of the instantaneous water heater when selecting your fitting kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 l/min 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 2,2 2,3 2,4 2,5 2,6 2,7 2,8 2,9 3,0 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4,0 4 ,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5,0 DCE-X 6/8 Premium DCE-X 10/12 Premium kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 l/min 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 2,2 2,3 2,4 2,5 2,6 2,7 2,8 2,9 3,0 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4,0 4 ,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5,0 DCE-S 6/8 Plus DCE-S 10/12 Plus

Page 25

Page 26

next page >Compact instantaneous water heaters, 1-phaseFull electronic controlCompact instantaneous water heaters, 1-phaseFull electronic control26Product information 2025 - Subject to technical modiﬁcations.DCE-X PremiumBeneﬁts › Maximum energy efﬁciency and accurate temperature delivery at all times thanks to fully electronic output control using 4i tech-nology, in compact design › Easy operation via large, illuminated multifunction display › Energy saving operation with ECO function › Fully transparent costs thanks to water and power consumption indicator › High quality design | Made in Germany › Quick temperature selection with two memory buttons › Safe operation thanks to extensive range of convenience and safety functions › Quick installation with PROFI-RAPID › Selectable output – can be adjusted internally › Suitable for preheated water up to 55°C with reheating and up to a maximum of 70°C without reheating. › Instant hot water thanks to rapid and maintenance-free bare wire heating systemApplication • This space saving compact instantaneous water heater ensures the supply of DHW even to multiple draw-off points – for example a shower, kitchen sink and washbasin. In commercial settings, cleaning rooms or multiple washbasins in sanitary facilities can be supplied. The unvented, pressure-tested appliance can be connected to all commercially available taps.Convenience features • The fully electronically controlled compact instantaneous water heater ensures accurate temperature delivery at all times thanks to the electronic ﬂow rate control. • The temperatures are variably and dig-itally adjusted in very precise 0.5 °C increments. • The large multifunction display with white backlighting not only shows the set temperature but also provides information on the current power consumption, energy consumption, ﬂow rate and time. Status and service information is also displayed. • The instantaneous water heater provides a memory function for 2 programmable preferred temperatures as well as a wide range of comfort functions, including various wellness programs and automated bath ﬁlling. • The individually adjustable temperature limiting function can be used for anti-scalding protection and childprooﬁng. • An LED indicator provides information about heating operation. • The keypad lock protects the appliance against unintentional adjustment.Efﬁciency • The appliance ensures energy and water savings of up to 30 % through fully electronic output control with 4i technology. Three sensors and an additional motorised valve ensure that the set temperature is achieved to the exact degree at all times. Only the amount of energy actually required is expended; there is no need to add cold water at the tap. As there are no thermal losses in the cylinder or pipework either, the instantaneous water heater is impressively efﬁcient. Also contributing to this efﬁciency is the individually selectable ECO mode. • The current water and power consumption can be displayed. • The appliance is suitable for operation with preheated water from solar thermal and heat pump systems.Installation • Quick and easy installation with the PROFI-RAPID installation system. • Straightforward, stable wall mounting: direct ﬁtting through the appliance back panel enables easy compensation for any wall unevenness and drill hole discrepancies. • Fast universal water connection using 1/2“ connections. The brass water connections at the bottom enable straightforward surface mounting. Optional accessories are available for ﬂush mounting with non-visible water connections. • Fitting to plastic pipework is also possible (follow the manufacturer‘s instructions). • Easy and ﬂexible electrical connection at the top or bottom when ﬂush mounting and at the bottom or sides when surface mounting. • The appliance cover can be easily opened using a central screw. • The entire inner assembly can be detached from the back panel. • Fast fault analysis with LED diagnostic trafﬁc light.Safety • The temperature can be permanently limited by an installer to suit individual needs. • The bare wire heating system is suitable for hard and soft water. • Multi stage electronic safety concept with air detection.DCE-X 6/8 Premium DCE-X 6/8 Premium DCE-X 10/12 PremiumPart number 238158 238159Price excl. VAT £ 428.00 451.00 Specification Rated voltage V 220 220Rated voltage 1 V 220 220Rated voltage 2 V 230 230Rated voltage 3 V 240 240Rated output kW 6.0/8.0 10.0/12.0Rated output 1 kW 6.0/8.0 10.0/12.0

Page 27

Compact instantaneous water heaters, 1-phaseFull electronic control27Product information 2025 - Subject to technical modiﬁcations. DCE-X 6/8 Premium DCE-X 10/12 PremiumRated output 2 kW 6.6/8.7 11.0/13.1Rated output 3 kW 7.2/9.6 12.0/14.3Rated current A 27.3/36.4 45.5/54.5Rated current 1 A 27.3/36.4 45.5/54.5Rated current 2 A 28.5/38.0 47.8/57.0Rated current 3 A 30.0/40.0 50.0/59.5Fuse protection A 30/40 50/60Fuse protection 1 A 30/40 50/60Fuse protection 2 A 30/40 50/60Fuse protection 3 A 30/40 50/60Frequency Hz 50/60 50/60Frequency 1 Hz 50/60 50/60Frequency 2 Hz 50/60 50/60Frequency 3 Hz 50/60 50/60Phases 1/N/PE 1/N/PEConductivity σ15 ≤ μS/cm 910 910Resistivity ρ15 ≥ Ω cm 1100 1100Switch-on water flow rate l/min 1.3 1.3IP rating IP25 IP25Temperature setting °C Off, 20 - 60 Off, 20 - 60Colour white whiteHeight mm 372 372Width mm 217 217Depth mm 109 109Weight kg 2.50 2.50Energy efficiency class A A

Page 28

next page >Compact instantaneous water heaters, 1-phaseElectronic closed-loop controlCompact instantaneous water heaters, 1-phaseElectronic closed-loop control28Product information 2025 - Subject to technical modiﬁcations.DCE-S PlusBeneﬁts › Maximum energy efﬁciency and accurate temperature delivery with 3i technology and electronic closed-loop control › High quality design | Made in Germany › Quick installation with PROFI-RAPID › Selectable output – can be adjusted internally › Suitable for preheated water up to 55°C with reheating and up to a maximum of 70°C without reheating. › Variable temperature selection via rotary selector › High safety level as anti-scalding protection can be permanently activated › Instant hot water thanks to rapid and maintenance-free bare wire heating systemApplication • This compact instantaneous water heater supplies several draw-off points with DHW, for example for the shower and kitchen sink. In commercial settings, water can be supplied to cleaning rooms or multiple washbasins in sanitary facilities. The unvented, pressure-tested appliance can be connected to all commercially available taps.Convenience features • The instantaneous water heater with electronic closed-loop control ensures accurate temper-ature delivery up to the maximum output. It can be variably adjusted via a manual rotary selector on the appliance.Efﬁciency • The 3i technology ensures energy and water savings of up to 30 % through electronic output control. • Energy savings are further assured as only the amount of energy actually required is used. • Furthermore, ther-mal losses in the cylinder and pipework are prevented as the water is heated directly at the draw-off point. • Cold water does not need to be added to achieve the preferred temperature, thereby improving the overall efﬁciency of the appliance. • The compact instantaneous water heater is suitable for operation with preheated water from solar thermal systems or heat pumps.Installation • Quick and easy installation is ensured with the improved PROFI-RAPID installation system. Direct ﬁtting through the appliance back panel enables easy compensation of any unevenness in the wall and drill hole discrepancies. • Fast, universal water connection from above is facilitated through the 1/2“ connections. The brass water connections at the bottom enable straightforward surface mounting. Optional accessories are available for ﬂush mounting with non-visible water connections. • Fitting to plastic pipework is also possible if the manufacturer‘s instructions are followed. • Simple and ﬂexible mains connection, which is made from below or above in the case of ﬂush-mounted installation. With surface-mounted installation, connection is possible from below or from the side. • The appliance cover can be easily opened using a central screw. • The entire inner assembly can be detached from the back panel. • Rapid fault analysis is assured with the integral LED diagnostic trafﬁc light.Safety • The temperature can be limited by an installer to suit individual needs. • The bare wire heating system is suitable for hard and soft water. • Multi stage electronic safety concept with high limit safety cut-out and air detection.DCE-S 6/8 Plus DCE-S 6/8 Plus DCE-S 10/12 PlusPart number 238153 238154Price excl. VAT £ 377.00 401.00 Specification Rated voltage V 220 220Rated voltage 1 V 220 220Rated voltage 2 V 230 230Rated voltage 3 V 240 240Rated output kW 6.0/8.0 10.0/12.0Rated output 1 kW 6.0/8.0 10.0/12.0Rated output 2 kW 6.6/8.7 11.0/13.1Rated output 3 kW 7.2/9.6 12.0/14.3Rated current A 27.3/36.4 45.5/54.5Rated current 1 A 27.3/36.4 45.5/54.5Rated current 2 A 28.5/38.0 47.8/57.0Rated current 3 A 30.0/40.0 50.0/59.5Fuse protection A 30/40 50/60Fuse protection 1 A 30/40 50/60Fuse protection 2 A 30/40 50/60

Page 29

Page 30

Page 31

Page 32

next page >Mini instantaneous water heaters Electronic closed-loop controlMini instantaneous water heatersElectronic closed-loop control32Product information 2025 - Subject to technical modiﬁcations.DEM SetBeneﬁts › Accurate temperature delivery up to the maximum output › Special aerator for perfect ﬂow pattern › Internal permanent set temperature for childprooﬁng and anti-scalding protection › Supplies one hand washbasin at maximum efﬁciency due to electronic closed-loop control › Instant hot water thanks to rapid and maintenance-free bare wire heating system › At inlet temperatures > 20°C, also suitable for showers › Suitable for oversink and undersink installation with a single appliance › Can be operated with pressurised and non-pressurised taps › Quick installation with PROFI-RAPID › 3.5kW version comes with standard plug (Product: 236584)Application • This mini instantaneous water heater with electronic closed-loop control can supply DHW to one wash-basin. • Can be operated with pressure taps or non-pressurised taps.Convenience features • Mini instantaneous water heater with closed-loop control, control electronics, outlet temper-ature sensor and variable ﬂow rate limitation. • Accurate temperature delivery up to the maximum output. • Internal temperature limiting • Including special aerator for perfect water ﬂow pattern and integral ﬂow controller for use in existing taps. • Anti-scalding protection for high inlet temperatures via automatic output matching. • Oversink or undersink installation possible.Efﬁciency • Electronic output control for energy efﬁcient and water saving operation. The outlet temperature sensor and control electronics ensure that the set temperature is achieved to the exact degree. For this, only the amount of energy required is expended; there is no need to add cold water at the tap. • The water is heated directly at the draw-off point and only when required. This prevents the energy and water losses caused by long pipe runs. This ensures maximum energy efﬁciency. • Suitable for preheated water from solar thermal and heat pump systems.Installation • Time saving and easy installation with the PROFI-RAPID installation system. Straightforward wall mounting with 2-point attachment. The back panel simultaneously acts as a drill template; slots compensate for drill hole discrepancies. • The appliance cover and internal assembly can be removed with just one hand movement. • Fast water connection thanks to external metal water ﬁttings for direct, universal installation of taps. • Simple electrical connection as power cable is wired up as standard. • Fault analysis with LED diagnostic trafﬁc light.Safety • Maintenance-free bare wire heating system, suitable for hard and soft water. • Safety system with high pressure switch and electronic temperature monitoring.DEM 3 Set 236584, 236463 DEM 3 Set DEM 4 Set DEM 6 SetPart number 236584 236462 236463Price excl. VAT £ 308.00 308.00 308.00 Specification Rated voltage V 230 230 230Rated voltage 1 V 200 200 200Rated voltage 2 V 220 220 220Rated voltage 3 V 230 230 230Rated voltage 4 V 240 240 240Rated output kW 3,53 4,4 5,7Rated output 1 kW 2,7 3,3 4,3Rated output 2 kW 3,2 4,0 5,2Rated output 3 kW 3,53 4,4 5,7Rated output 4 kW 3.8 4.8 6.2Rated current A 15,2 19,1 24,7Rated current 1 A 13,3 16,7 21,6Rated current 2 A 14,5 18,2 23,6Rated current 3 A 15,2 19,1 24,7Rated current 4 A 15.8 20.0 25.8Fuse protection A 16 20 25Fuse protection 1 A 16 20 25Fuse protection 2 A 16 20 25

Page 33

Mini instantaneous water heatersElectronic closed-loop control33Product information 2025 - Subject to technical modiﬁcations. DEM 3 Set DEM 4 Set DEM 6 SetFuse protection 3 A 16 20 25Fuse protection 4 A 16 20 32Frequency Hz 50/60 50/60 50/60Frequency 1 Hz 50/60 50/60 50/60Frequency 2 Hz 50/60 50/60 50/60Frequency 3 Hz 50/60 50/60 50/60Frequency 4 Hz 50/60 50/60 50/60Phases 1/N/PE 1/N/PE 1/N/PEConductivity σ15 ≤ (at ϑcold ≤ 25 °C)μS/cm 1000 1000 1000Conductivity σ15 ≤ (at ϑcold > 25 °C)μS/cm 770 770 770Resistivity ρ15 ≥ (at ϑcold ≤ 25 °C)Ω cm 1000 1000 1000Resistivity ρ15 ≥ (at ϑcold > 25 °C)Ω cm 1300 1300 1300Water connection G 3/8 A G 3/8 A G 3/8 ASwitch-on water flow rate l/min >1,5 >1,8 >2,2IP rating IP25 IP25 IP25Temperature setting °C 30-50 30-50 30-50Colour white white whiteHeight mm 143 143 143Width mm 190 190 190Depth mm 82 82 82Weight kg 1.70 1.70 1.70Energy efficiency class A A AIncl. connector / adaptor for 3/8“ ﬁtting onto 15 mm press ﬁtting (239551).

Page 34

Page 35

Page 36

Page 37

Page 38

Page 39

Page 40

Page 41

Page 42

Automatic water boilers UndersinkAutomatic water boilersUndersink42Product information 2025 - Subject to technical modiﬁcations.HOT 2.6 N Premium 3in1 Set GBBeneﬁts › Very hot water available immediately › Compact and very slimline design › No steam hammer during drawing › With special HOT 3in1 kitchen tap as standard › Childproof thanks to well designed push & turn mechanism › No residual water in the tap › Low energy losses thanks to the high grade thermal insulation › Long service lifeApplication • This compact and very ﬂat automatic water boiler delivers almost boiling water without delay. • The electronic temperature control with automatic boiling point detection controls the electric heating and maintains a constant water temperature of up to 95 °C. Hot water cylinders and radiators are made of high grade stainless steel for a long service life. • Hot drinks and food can be prepared quickly with the non-pressurised appliance. It also makes it easy to clean very dirty dishes. • The automatic water boiler can be used in the home as well as in small ofﬁces and doctors‘ practices.Convenience features • The space saving water boiling set comprises a 2.6 l capacity undersink DHW cylinder and the special HOT 3in1 kitchen tap. The tap has a mixing lever for cold and hot water as well as a special lever to draw off almost boiling water from the appliance. • The well designed push & turn mechanism of the tap lever for boiling water ensures everyday safety. Thanks to the special design, hot water can be drawn with little steam or splashing. • In order to reduce heat losses and increase safety, hot residual water runs back into the automatic water boiler after draw-off. • If the water hardness is 10 °e (1.5 mmol/l) or higher, the appliance must be operated with a ﬁlter. The appliance automatically reminds you of the upcoming ﬁlter change.Installation • Quick and easy mains connection via power cable with standard plug.Efﬁciency • Low standby losses thanks to high grade thermal insulation made of rigid polyurethane foam. • In order to reduce energy consumption, the water temperature can be lowered using time programs. This is useful, for example, in ofﬁces where work is only done at certain times.Safety • The appliance features automatic boil-dry detection and an additional high limit safety cut-out. • The special mechanism of the tap lever acts as a childprooﬁng device as it prevents accidental operation.HOT 2.6 N 1600 Premium + 3in1 N3 c HOT 2.6 N 1600 Premium + 3in1 N3 c HOT 2.6 N 1600 Premium + 3in1 N4 bPart number 203882 203883Price excl. VAT £ 579.00 659.00 Specification Power supply 1/N/PE 1/N/PERated voltage V 230 230Fuse protection 1 A 10 10Frequency Hz 50-60 50-60Standby energy consump-tion/24 h at 95 °CkWh 0.45 0.45Tap 3in1 N3 c 3in1 N4 bType non-pressurised non-pressurisedApplication Sink SinkCylinder material Stainless steel Stainless steelColour white whiteTemperature selection °C 95 95Height mm 450 450Width mm 200 200Depth mm 145 145Capacity up to l 2,6 2,6Spout height mm 226 226Spout reach mm 210 210Weight kg 9.00 9.00Tap surface chrome plated brushed

Page 43

Page 44

Page 45

Page 46

next page >Small water heaters, non-pressurised UndersinkSmall water heaters, non-pressurisedUndersink46Product information 2025 - Subject to technical modiﬁcations.SNE ECOBeneﬁts › Rapid supply of domestic hot water with no waiting, thanks to non-pressurised operation › Precise temperature adjustment via operating buttons and electronic closed-loop control › Operating parameters displayed on illuminated LCD screen › Power saving operation with ECO function › Combats germ growth with integral hygiene function › Optimum DHW heating and minimum energy losses with selectable weekly timers › Very low energy losses thanks to high grade thermal insulation › Anti-scalding protection and childprooﬁng thanks to adjustable temperature limit and lockable operating controls › Anti-drip function ensures convenience and hygiene › The thermostop function ensures no energy losses from mixer tap › Extensive range of taps available as accessoriesApplication • These non-pressurised, vented small water heaters supply DHW to individual draw-off points such as a kitchen sink or washbasin. The non-pressurised appliances for undersink installation can be combined with commercially available non-pressurised taps.Convenience features • Electronic closed-loop control guarantees convenient and efﬁcient DHW heating. The preferred temperature can be set to the exact degree at the user interface with LCD screen. The current temperature as well as the operating time and heating time are displayed. • Three programmable weekly timers (home, ofﬁce, individual) are available to customise the appliance. • The hygiene circuit provides pasteurisation of the appliance at the touch of a button. • Both the minimum and maximum temperatures are freely adjustable. • A visual display indicates when the appliance is heating up.Efﬁciency • The power saving ECO function is activated at the press of a button and visually indicated. • The anti-drip function prevents expansion water dripping during heat-up of the small water heater. This saves water and energy whilst also reducing limescale deposits on the taps, sink or washbasin. • The energy saving thermostop technology prevents unwanted heating of the mixer tap. • The plastic inner cylinder made from polypropylene is protected from energy losses by high grade EPS thermal insulation.Installation • Quick and easy installation with the PROFI-RAPID installation system. Easy replacement as suitable for commonly used ﬁxing points. To simplify wall mounting, a universal mounting rail is included in the standard delivery. • A secure water connection is possible thanks to the metal threaded water ﬁttings with male thread. • The power cable is supplied with a standard plug. Any excess cable can be housed in the practical cable storage compartment in the appliance back panel.Safety • The robust copper tubular heater ensures a long service life thanks to the low surface load. • Safe commis-sioning is assured by the resettable high limit safety cut-out. • For anti-scalding protection, the temperature can be limited electronically to the exact degree. • The automatic frost protection prevents freezing at low temperatures.SNE 5 t ECO GB SNE 5 t ECO GB DISCONT.PRODUCTPart number 202135Price excl. VAT £ 201.00 Specification Connected load kW 2Rated output 2 kW 2,0Power supply 1/N/PERated voltage V 230Fuse protection 2 A 10Frequency Hz 50-60Energy efficiency class AStandby energy consump-tion/24 h at 65 °CkWh 0.20Standby energy consump-tion/24 h at 38 °CkWh 0.09

Page 47

Page 48

next page >Small water heaters, non-pressurisedUndersink48Product information 2025 - Subject to technical modiﬁcations.SNU Plus (GB)Beneﬁts › Rapid supply of domestic hot water with no waiting › High quality workmanship and attractive design characterise this very compact appliance › Extensive range of taps available as accessories › Very low energy losses thanks to the high grade thermal insulation and integral thermostop function › Quick and easy replacement of predecessor appliances. The existing wall mounting bracket can be used for the replacement. › Low standby energy consumption › WRAS certiﬁed (Product: 204971, 204981) › anti-drip function for the highest convenience and hygiene standards (Product: 204971) › High energy efﬁciency and compact dimensions thanks to innovative vacuum insulation (Product: 204971)Application • These very compact small water heaters with their attractive design are suitable for supplying hot water to individual draw-off points, for example a bathroom washbasin or a kitchen sink. • The non-pressurised appliances provide DHW with no waiting time. They can only be combined with non-pressurised taps.Convenience features • The casing is distinguished by its surface structure that feels pleasant to the touch. • Variable temperature setting via the high quality haptic rotary selector. • Fast and accurate temperature capture by the sensor which is immersed in the water. • 4-stage temperature limit. • Automatic frost protection setting when the appliance is off. • A visual display indicates when the small water heater is heating up.Efﬁciency • Low energy losses thanks to high grade EPS thermal insulation of the polypropylene inner cylinder. • The energy saving thermostop function prevents unwanted heating of the tap. • Very low standby energy consumption.Installation • Quick installation with the Proﬁ-Rapid installation system. The very compact small water heater is suitable for commonly used ﬁxing points, so that existing appliances can be quickly replaced. • Straightforward wall mounting thanks to universal mounting rail. • Safety due to metal threaded water ﬁttings. • Power cable for permanent connection to the mains. • Splashproof.Safety • The robust copper tubular heater ensures a long service life • Safe commissioning thanks to the resettable high limit safety cut-out. • Anti-scalding protection through mechanical temperature limit. • For the earth conductor test, simply remove the rotary selector, so the test point is always accessible.SNU 5 Plus (GB)204971 SNU 5 Plus (GB) SNU 10 Plus (GB)Part number 204971 204981Price excl. VAT £ 193.00 206.00 Specification Connected load kW 2 2Rated output 2 kW 2,0 2,0Power supply 1/N/PE 1/N/PERated voltage V 230 230Fuse protection 2 A 10 10Frequency Hz 50-60 50-60Energy efficiency class A AStandby energy consump-tion/24 h at 65 °CkWh 0.19 0.31Standby energy consump-tion/24 h at 38 °CkWh 0.07 0.11Nominal capacity l 5 10Mixed water amount at 40 °C l 9,3 19Temperature setting range °C 35-85 35-85Version Small water heater Small water heaterType non-pressurised non-pressurisedInstallation type Undersink UndersinkWith tap - -Colour white whiteCable length m 0,9 0,9

Page 49

Page 50

Small water heaters, non-pressurisedUndersink50Product information 2025 - Subject to technical modiﬁcations.SNU 5 Plus + WST-W (GB)Beneﬁts › Plug-in appliance for easy installation – for electrical connection to any standard safety socket › Rapid supply of domestic hot water with no waiting, thanks to non-pressurised operation › Small water heater and mixer tap in a single packing unit › Very low energy losses thanks to high grade thermal insulation › The thermostop function ensures no energy losses from mixer tap › WRAS certiﬁed (Product: 205848) › anti-drip function for the highest convenience and hygiene standards (Product: 205848)Description • DHW set consisting of the SNU 5 Plus (GB) and the non-pressurised, vented WST-W mixer tap for sup-plying DHW to one washbasin.SNU 5 Plus GB + WST-W SNU 5 Plus GB + WST-WPart number 205848Price excl. VAT £ 316.00 Specification Connected load kW 2Rated output 2 kW 2,0Power supply 1/N/PERated voltage V 230Fuse protection 2 A 10Energy efficiency class AStandby energy consump-tion/24 h at 65 °CkWh 0.20Standby energy consump-tion/24 h at 38 °CkWh 0.09Type non-pressurisedInstallation type UndersinkWith tap -Cable length m 0,6Operation manualTemperature limit •IP rating IP24 DHeight mm 421Width mm 263Depth mm 230Weight kg 3.00SNU 5 Plus WST-W (Product: 205848)

Page 51

Page 52

next page >Small water heaters, non-pressurised OversinkSmall water heaters, non-pressurisedOversink52Product information 2025 - Subject to technical modiﬁcations.SNO Plus (GB)Beneﬁts › Rapid supply of domestic hot water with no waiting › High quality workmanship and attractive design characterise this very compact appliance › Very low energy losses thanks to high grade thermal insulation › Quick and easy replacement of predecessor appliances. The existing wall mounting bracket can be used for the replacement. › Low standby energy consumption › WRAS certiﬁed (Product: 204979, 204984) › Power cable for permanent connection, approx. 1m (Product: 204979, 204984) › High energy efﬁciency and compact dimensions thanks to innovative vacuum insulation (Product: 204979)Application • These efﬁcient and energy saving non-pressurised small water heaters supply DHW to individual draw-off points such as sinks in utility rooms or kitchens. • The ﬁttings are a pivoting spout and an inlet valve mounted directly on the small water heater.Convenience features • The cylinder for oversink installation supplies warm and hot water to individual draw-off points at any time. • Variable temperature setting via the high quality haptic rotary selector. • The frost protection function activates automatically when the appliance is switched off. It monitors the water temperature and prevents the cylinder from freezing.Efﬁciency • Water is heated directly at the draw-off point, which prevents thermal losses in the cylinder and pipe-work. • Low energy losses thanks to high grade EPS thermal insulation of the polypropylene inner cylinder. • Fast and accurate temperature measurement by the sensor immersed in the water.Installation • Very quick installation with the improved PROFI-RAPID installation system. • Straightforward replace-ment for all standard small water heaters. • The universal mounting rail compensates for any unevenness in the wall and drill hole discrepancies and is suitable for commonly used ﬁxing points. • Metal threaded water ﬁttings for secure replacement. • Any excess power cable can be housed in the practical cable storage compartment in the appliance back panel.Safety • Long service life thanks to robust copper tubular heater with low surface load. • Safe commissioning for all 2 kW appliances with resettable high limit safety cut-out. • Anti-scalding protection can be activated by mechanical temperature limiting. • For the earth conductor test, simply remove the rotary selector, so the test point is always accessible.SNO 5 Plus (GB) SNO 5 Plus (GB) SNO 10 Plus (GB)Part number 204979 204984Price excl. VAT £ 183.00 240.00 Specification Connected load kW 2 2Rated output 2 kW 2,0 2,0Power supply 1/N/PE 1/N/PERated voltage V 230 230Fuse protection 2 A 10 10Frequency Hz 50-60 50-60Energy efficiency class A AStandby energy consump-tion/24 h at 65 °CkWh 0.07 0.27Nominal capacity l 5 10Mixed water amount at 40 °C l 9,3 19Temperature setting range °C 35 - 85 35 - 85Version Small water heater Small water heaterType non-pressurised non-pressurisedInstallation type Oversink OversinkWith tap - -Colour white whiteCable length m 0,9 0,9Operation manual manual

Page 53

Page 54

Page 55

Page 56

Accessories for small water heaters and DHW cylinders, non-pressurisedTaps, undersinkAccessories for small water heaters and DHW cylinders, non-pressurisedTaps, undersink56Product information 2025 - Subject to technical modiﬁcations.WUT-KBeneﬁts › Non-pressurised twin lever tap › Temperature and water volume can be selected separately › Easy care chrome plated surfaceDescription • The non-pressurised mixer tap with two rotary handles is combined with an open vented DHW cylin-der. • The tap is available as a washbasin or kitchen version. • The mixed water amount in the small water heater is optimally utilised. • The mixed water temperature and water volume are conveniently adjusted by means of two rotary handles.WUT-K WUT-KPart number 205615Price excl. VAT £ 127.00 Specification Version Mixer tapApplication SinkConnection Connection hosesInstallation type Monobloc mixer tapSurface chrome platedSpout reach mm 193Spout height mm 208 WST-WBeneﬁts › Mixer tap › Non-pressurised version for washbasinsDescription • The non-pressurised, vented WST-W mixer tap is installed on the washbasin.WST-W parts kit SNU GB WST-W parts kit SNU GBPart number 227726Price excl. VAT £ 127.00 Specification Application Small water heaterSurface ChromeSpout reach mm 129Spout height mm 142

Page 57

Accessories for small water heaters and DHW cylinders, non-pressurisedTaps, undersink57Product information 2025 - Subject to technical modiﬁcations.TWS-WBeneﬁts › Non-pressurised twin lever tap › Temperature and water volume can be selected separately › Easy-care chrome plated surface, plastic rotary handlesDescription • The non-pressurised mixer tap with a pivoting spout and two rotary handles is suitable for washbasins. • The mixed water temperature and water volume are conveniently adjusted by means of two rotary handles. • The mixed water amount in the small water heater is optimally utilised.TWS-W TWS-WPart number 205613Price excl. VAT £ 77.00 Specification Version Mixer tapApplication WashbasinConnection Connection hosesInstallation type Monobloc mixer tapSurface chrome platedSpout reach mm 150Spout height mm 172 MAE-KBeneﬁts › Mono lever mixer tap › Non-pressurised tap for sinksDescription • MAE-K non-pressurised, vented mono lever mixer tap for installation on a kitchen sink.MAE-K MAE-KPart number 205616Price excl. VAT £ 77.00 Specification Version non-pressurisedApplication SinkConnection Connection hosesInstallation type Monobloc mixer tapSurface ChromeSpout reach mm 222Spout height mm 150

Page 58

Page 59

Page 60

Small water heaters, pressurised UndersinkSmall water heaters, pressurisedUndersink60Product information 2025 - Subject to technical modiﬁcations.Beneﬁts › Supplies multiple draw-off points via a pressurised connection › Quick DHW heating without delay › Matching safety assemblies as accessoriesApplication • These SH cylinders are suitable for supplying multiple draw-off points with a low DHW demand. • The pressure-tested appliances for oversink installation can be combined with all commercially available pressure taps. • An appliance version with 3.3 kW connected load is available for quick heat-up. • An appropriate safety assembly is necessary for installation.Convenience features • Tailored solutions for decentralised group supply. The oversink water heater heats the water directly at the draw-off point. Energy and water losses due to long pipe runs are avoided. No circulation losses. Low energy losses thanks to high grade thermal insulation. • Warm or hot water available at any time. Temperature con-troller with temperature sensor immersed directly in the water. Variable temperature selection via rotary selector; the temperature can also be limited in several stages. • The automatic frost protection setting is still active when the appliance is off. • An indicator lamp signals when the DHW cylinder is being heated up. • The pressure-tested steel inner cylinder is equipped with high grade EPS thermal insulation.Installation • Quick and easy installation is ensured by the PROFI-RAPID installation system. Existing appliances can be easily replaced as the design is suitable for commonly used ﬁxing points. Wall mounting is facilitated by a universal mounting rail, which is included in the standard delivery. • For secure threaded ﬁttings, the appliance has metal water ﬁttings. • Suitable safety assemblies are available as accessories. • Power cable for permanent connection. Any excess cable can be housed in the practical cable storage compartment in the appliance back panel. • Protection rating IP 24 (splashproof).Safety • The robust copper tubular heater is distinguished by its low surface load. • Resettable high limit safety cut-out reset button. • For anti-scalding protection, the temperature can be limited mechanically.SH 15 SL GB Set AXSH 15 SL GB Set AX SH 15 SL GB Set AXPart number 227692Price excl. VAT £ 442.00 Specification Nominal capacity l 15 Required accessories Part number 236702Type UVK (SH/SHC)Description Safety assembly, pressure-testedPrice excl. VAT £ 206.00incl. pressure limiting valve and adaptor (Product: 227692)

Page 61

Page 62

Accessories for small water heaters, pressurisedAccessoriesAccessories for small water heaters, pressurisedAccessories62Product information 2025 - Subject to technical modiﬁcations.UVKBeneﬁts › Cold water control set for combination with small water heaters › Pressure-tested safety assemblyDescription • The cold water control set comprises a protective pipe strainer, pressure limiter, non-return valve, expansion overpressure valve, distributor and diaphragm expansion vessel.UVK (SH/SHU/SHC) UVK (SH/SHU/SHC 5/10 litre variants) UVK (SH/SHC 15 litre variants)Part number 236701 236702Price excl. VAT £ 206.00 206.00 Specification Max. permissible pressure MPa 1.20 1.20Safety valve response pressure MPa 0.60 0.60Pressure reducing valve • •Pressure reducing valve setting rangeMPa 0,3 0,3Drip water connection • •Water connection 15 mm 15 mmInstallation type Surface-mounted Surface-mounted

Page 63

Page 64

Page 65

Page 66

next page >Wall mounted cylinder PressurisedWall mounted cylinderPressurised66Product information 2025 - Subject to technical modiﬁcations.SHZ (GB)Beneﬁts › Variable temperature setting via rotary selector › Simple maintenance with LED signal anode in the user interface › Electronic heat content indicator via LED indicator in the user interface › Suitable for single or dual circuit operation (connected to off-peak economy tariff) and for manual rapid heat-up operation › Very low energy losses thanks to high grade thermal insulation › The steel inner cylinder features a special directly applied enamel coating for a long service life › Quick and easy installation using mounting bracket, drilling template, caps and spacersApplication • These splashproof wall mounted cylinders supply DHW to multiple draw-off points, for example in the bathroom and kitchen. • The pressure-tested appliance can be combined with all commercially available pressure taps, can also supply a single draw-off point and can be used in single circuit, dual circuit or manual rapid heat-up operation.Convenience features • The temperature can be variably regulated and if required, limited in 3 stages for anti-scalding protection. • The available quantity of DHW is shown on the user interface by means of seven LED illuminated ﬁelds; an additional display indicates when the appliance is heating up. • For higher DHW demand, a rapid heat-up function can be activated with the Boost button.Efﬁciency • The high grade thermal insulation guarantees low energy losses. • At the end of its service life, the appliance can be dismantled in an environmentally responsible manner and recycled.Installation • Straightforward replacement of all standard wall mounted cylinders. • Suitable for installation in sys-tems with plastic, copper or stainless steel pipework. • Integral recessed grips provide a secure hold when carrying the appliance. • A useful installation template is included for marking out the drill holes and for pre-installation of the water connections. • Quick and straightforward wall mounting with the universal installation template. Also suitable for installation in corners. • Caps for the mounting bracket and spacers for protruding walls are included in the standard delivery. • Selectable connected load with removable strain relief for simpliﬁed installation. • The signal anode with immediately visible display indicates consumption level of the protective anode. The anode can be changed without removing the ﬂange; the ﬂanged immersion heater with unmistakable electrical ﬂange mount connector can be easily removed. • Installation with: safety assembly, funnel and diaphragm expansion vessel. • The wall mounted cylinder is splashproof and can be easily drained using the drain valve with hose connection. • Descaling can be effectively and safely carried out through the ﬂanged aperture.Safety • The universal ﬂanged immersion heater makes the appliance suitable for single circuit, dual circuit or manual rapid heat-up operation. • The high quality protective anode has a consumption indicator on the user interface and an integral T&P valve. • The steel inner cylinder features a special directly applied „anticor“ enamel coating for a long service life. • The automatic frost protection function monitors the water temperature and protects the cylinder from freezing at low temperatures.SHZ 30 S (GB) SHZ 30 S (GB) SHZ 50 S (GB) SHZ 100 S (GB) SHZ 150 S (GB)Part number 232783 232784 232786 232788Price excl. VAT £ 1,071.00 1,112.00 1,152.00 1,260.00 Specification Connected load ~ 230 V kW 1-4 1-4 1-4 1-4Power supply 1/N/PE 1/N/PE 1/N/PE 1/N/PERated voltage V 230 230 230 230Frequency Hz 50 50 50 50Load profile S M L XLEnergy efficiency class B C C CStandby energy consump-tion/24 h at 65 °CkWh 0.52 0.60 0.94 1.19Nominal capacity l 30 50 100 150Mixed water amount at 40 °C l 50 80 133 229Temperature setting range °C 35-70 35-70 35-70 35-70Max. flow rate l/min 18 18 18 18Colour white white white white

Page 67

Page 68

Page 69

Page 70

Floor mounted cylinder Electric ﬂoor mounted cylinders, pressurisedFloor mounted cylinderElectric ﬂoor mounted cylinders, pressurised70Product information 2025 - Subject to technical modiﬁcations.ESH F Trend GBBeneﬁts › High hot water convenience due to electric ﬂanged immersion heaters › Durable and lightweight inner cylinder made from stainless steel › Low energy losses thanks to the high grade thermal insulation › Straightforward installation due to low weight, pre-installed components and height-adjustable feetApplication • These pressure-tested electric ﬂoor mounted cylinders are suitable for providing DHW to multiple draw-off points in apartments of 30 m2 or more. • The unvented, pressure-tested appliances can be used with all commercially available pressure taps.Convenience features • The high level of hot water convenience is made possible by integral electric ﬂanged immersion heaters. • The preferred temperature is variably selected and maintained at the level set on the controller. • Powerful performance makes it possible to supply hot water on demand even with smaller appliances – saving space in the installation room. • Unobtrusive connections for water and electricity. • The inner cylinder is made of stainless steel.Efﬁciency • Low energy losses thanks to high grade thermal insulation.Installation • Easy handling due to low weight. • Levelling with height-adjustable feet integrated into the ﬂoor mounted cylinder. • Quick and straightforward installation is ensured by the pre-installed T&P valves and the pre-installed valve combination for the inlet and outlet. • Space saving installation, even directly above the washing machine, is possible with an optional mounting bracket.Safety • Anti-scalding protection can be integrated through the internal temperature limit. • Resettable high limit safety cut-out reset button.ESH 120 F Trend GB ESH 120 F Trend GBESH 150 F Trend GBESH 180 F Trend GBESH 210 F Trend GBESH 250 F Trend GBESH 300 F Trend GBPart number 204791 204792 204793 204794 204795 204796Price excl. VAT £ 712.00 854.00 890.00 930.00 1,011.00 1,102.00 Specification Power supply 1/N/PE ~ 220-240 V1/N/PE 1/N/PE ~ 220-240 V1/N/PE ~ 220-240 V1/N/PE ~ 220-240 V1/N/PE ~ 220-240 VRated voltage V 240 240 240 240 240 240Load profile L L XL XL XL XLEnergy efficiency class C C C C C DStandby energy consump-tion/24 h at 65 °CkWh 1.03 1.27 1.42 1.56 1.75 2.04Nominal capacity l 111 143 164 193 242 280Mixed water amount at 40 °C l 152 183,7 209,2 275,3 332,6 384,2Temperature setting range °C 30-60 30-60 30-60 30-60 30-60 30-60Max. flow rate l/min 15 15 15 15 15 15Flanged immersion heater version Single circuit Single circuit Single circuit Single circuit Single circuit Single circuitColour white white white white white whiteIP rating IP21 IP21 IP21 IP21 IP21 IP21Height mm 870 1050 1160 1300 1550 1750Width mm 575 575 575 575 575 575Depth mm 575 575 575 575 575 575Weight, empty kg 37 42 47 52 59 65

Page 71

Page 72

next page >Accessories for ﬂoor mounted cylinders, pressurisedElectric threaded immersion heaters and ﬂanged immersion heatersAccessories for ﬂoor mounted cylinders, pressurisedElectric threaded immersion heaters and ﬂanged immersion heaters72Product information 2025 - Subject to technical modiﬁcations.FCRBeneﬁts › Replaceable copper heating element › For matching to individual usage scenarios › High hot water convenience thanks to powerful heating elements › Variable temperature setting via rotary selectorDescription • The ﬂanged immersion heaters are suitable for horizontal installation in unvented DHW cylinders with ﬂange connectors to DIN 4805. • The temperature can be variably adjusted. It is possible to limit the temperature. • Please note the details supplied by the cylinder manufacturer, as well as DIN 4753 and DIN 4751.FCR 21/60 FCR 21/60 FCR 21/120 E FCR 28/120 E FCR 28/180 EPart number 071330 071331 000694 000695Price excl. VAT £ 1,032.00 978.00 1,105.00 1,117.00 Specification Connected load ~ 230 V kW 2-4 4 Connected load ~ 400 V kW 2-6 8/12 12 18Power supply 1/N/PE, 3/N/PE 1/N/PE, 2/N/PE, 3/PE 3/PE 3/PERated voltage V 230/400 230/400 400 400Coil voltage V 230 230 400 400Frequency Hz 50/60 50/60 50 50Version Dual/single circuit Single circuit Single circuit Single circuitIntegral contactor X - X XIP rating IP24 IP24 IP24 IP24Immersion depth mm 400 400 325 325Flange diameter mm 210 210 280 280 (Product: 000694)Temperature controller with frost protection setting (external), temperature limit possible, integral pushbutton for rapid heat-up, high limit safety cut-out, ﬂange gasket, protective cover with two cable entries. Temperature controller with frost protection setting, high limit safety cut-out, ﬂange gasket, protective cover with two cable entries. (Product: 000694, 000695) (Product: 000694)BGCBeneﬁts › For matching to individual usage scenarios › High hot water convenience thanks to powerful heating elements › Variable temperature setting via rotary selectorApplication • This threaded immersion heater is suitable for sealed unvented heating systems and DHW heating systems. • The temperature can be variably adjusted; temperature limitation is possible. • The integral temperature controller is equipped with a high limit safety cut-out.BGC 6 kW 500 mm ET BGC 6 kW 500 mm ET BGC/45Part number 003769 075115Price excl. VAT £ 267.00 280.00

Page 73

Page 74

Page 75

Page 76

Page 77

Page 78

Page 79

Page 80

next page >Air source heat pumps, outdoor installation – inverterInverterAir source heat pumps, outdoor installation – inverterInverter80Product information 2025 - Subject to technical modiﬁcations.WPL-A 05/07 HK PremiumBeneﬁts › The air source heat pump for heating and cooling is installed outdoors › Inverter technology allows ideally matched heating output through the variable speed compressor › Suitable for energy modernisation projects, as the high supply ﬂow temperature is available all year round › Quiet operation thanks to encapsulated refrigerant circuit and variable matched fan speed › High efﬁciency and low operating costs all year round, thanks to optimally matched components › Can be integrated into the home network and operated via a smartphone › Futureproof and eco-friendly refrigerant with high efﬁciencyApplication • This air source heat pump with output-dependent control and inverter technology is designed as a compact mono block appliance for outdoor installation. It delivers the required heating output, ensures a reliable supply of domestic hot water and can be used for efﬁcient cooling through circuit reversal. • A ﬂow temperature of up to 75 °C is available for heating mode and DHW heating. Protection against legionella is ensured without the need for an electric auxiliary heater. • The heat pump can also be used to heat older buildings via radiators, as a ﬂow temperature of 55 °C can still be achieved even when there is a heavy frost (-25 °C outside temperature).Convenience features • Very quiet operation is made possible by the encapsulated refrigerant circuit and acoustically isolated compressor. Contributing to the low sound power level are the modulating fan and the wide gaps between the evaporator ﬁns which reduce air resistance. • High DHW temperatures are assured without the need for electric backup, even in the winter; this is because the heat pump works with high ﬂow temperatures all year round. • The system can be integrated into a home network and controlled from a mobile device. For this, the on-site heat pump manager is combined with the Internet Service Gateway. With integral heat and electricity metering via refrigerant circuit data. • Mono energetic operation is possible thanks to the integral electric emergency/auxiliary heater. • The enamelled, corrosion-protected metal casing is made from hot-dip galvanised, powder coated sheet steel. Fan grille, recessed grips and cover are made from weatherproof and UV-resistant plastic.Efﬁciency • The refrigerant circuit works with the eco-friendly, futureproof refrigerant R454C. When combined with the optimally matched components, highly efﬁcient operation is possible all year round. This efﬁciency is helped by demand-dependent defrosting via circuit reversal and the heating of the condensate pan via the refrigerant cir-cuit.• The hydrophilic coating on the fan nozzle prevents ice from forming, meaning that no electric heating is required.Installation • The integral anti-vibration mount enables the heat pump to be connected directly to the heating sys-tem. • Simpliﬁed installation thanks to pivoting electrical connection panel. • Quick access to the condensate pan is possible via the cleaning aperture on the back of the casing.WPL-A 07 HK 230 Premium WPL-A 07 HK 230 PremiumPart number 200123Price excl. VAT £ 5,100.00 Specification Energy efficiency class, heat pump W35 A+++Energy efficiency class, heat pump W55 A+++Heating output at A7/W35 (EN 14511)kW 3.31Heating output at A2/W35 (EN 14511)kW 4.30Heating output at A-7/W35 (EN 14511)kW 6.87COP at A7/W35 (EN 14511) 5.42COP at A2/W35 (EN 14511) 4.30COP at A-7/W35 (EN 14511) 2.93Max. cooling capacity at A35/W7kW 7.30

Page 81

Air source heat pumps, outdoor installation – inverterInverter81Product information 2025 - Subject to technical modiﬁcations. WPL-A 07 HK 230 PremiumCooling capacity at A35/W18 partial loadkW 4.94Max. cooling capacity at A35/W18kW 10.15Energy efficiency ratio at A35/W7 max. 2.35Energy efficiency ratio at A35/W18 partial load 4.28Energy efficiency ratio at A35/W18 max. 2.87SCOP 35 °C (EN 14825) 4.88Sound power level (EN 12102) dB(A) 48Min./max. application limits for heat source°C -25/40Max. application limit on the heating side°C 75Height mm 900Width mm 1270Depth mm 593Weight kg 135Rated voltage, compressor V 230Rated voltage, emergency/aux-iliary heaterV 230Refrigerant R454C Required accessories Part number 234727Type WPMDescription Heat pump manager in wall mounted enclosurePrice excl. VAT £ 587.00 Recommended accessories Part number 229336Type ISG webDescription Internet Service GatewayPrice excl. VAT £ 889.00Part number 233623Type AS-WP 2Description Hydraulic connection setPrice excl. VAT £ 114.00Part number 234722Type WK 2Description Wall mounting bracketPrice excl. VAT £ 490.00 DHW cylinder Part number 206187Type SBB 300 TrendDescription Price excl. VAT £ 1,683.00Part number 236917Type HSBC 200 S (GB) SetDescription Integral cylinderPrice excl. VAT £ 3,723.00 Service Part number 330567Type Guarantee check of HP (standard)Description Warranty checkPrice excl. VAT £

Page 82

Page 83

Page 84

Page 85

Air source heat pumps, outdoor installation – inverterInverter85Product information 2025 - Subject to technical modiﬁcations.ASHP 7.5kW Premium / 300 Premium Compact PackBeneﬁts › The integral WPM heat pump manager makes the system easier to install › Air source heat pump set for maximum efﬁciency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high ﬂow tempera-tures all year round › DHW cylinder and buffer cylinder with integral hydraulic components including heat pump manager for heat pumps and heating circuit connection in a single casingApplication• The pack combines our popular premium mono bloc air source heat pump paired with a highly integrated indoor module. Suitable for fast, space saving installations with active cooling. The output dependent control can deliver higher required ﬂow temperatures all year round. • Flow temperatures of up to 75 °C make the unit compatible with both retroﬁt or new build projects and is great for higher mixed hot water volumes. • The integrated indoor unit makes this a fantastic option for properties that are limited on space. The pack offers active cooling through reversal of the refrigerant circuit. • The indoor module also contains the following components: DHW cylinder, cylinder charging pump, circulation pump, 3/2-way diverter valve, safety valve, electric emergency/auxiliary heater and the heat pump manager, which is used to control the system.ASHP 7.5kW Premium / 300 Premium Com-pact ASHP 7.5kW Premium / 300 Premium Compact PackPart number 204907Price excl. VAT £ 12,119.00 Set components ASHP 7.5kW Premium / 300 Premium Compact Pack1 Type WPL-A 07 HK 230 Premium Qty 1 Air source heat pump Page 802 Type HSBC 300 cool (GB) Set Qty 1 Integral cylinder Page 1543 Type FET Qty 1 Digital remote control Page 54 Type ISG web Qty 1 Internet Service Gateway Page 55 Type FS-WP 28 Qty 1 Filter sets Page 130Further information about the Set components can be found under therespective product.

Page 86

Air source heat pumps, outdoor installation – inverterInverter86Product information 2025 - Subject to technical modiﬁcations.ASHP 7.5kW Premium / 300 PackBeneﬁts › Air source heat pump set for maximum efﬁciency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high ﬂow tempera-tures all year round › Separate buffer cylinder for separation of ﬂow rates for maximum operational reliability › High hot water convenience due to separate DHW cylinderApplication • The pack combines our popular premium mono block air source heat pump with separate DHW and buffer cylinders. The output dependent control can deliver 75 °C ﬂow temperatures all year round. • Flow temperatures of up to 75 °C make the unit compatible with both retroﬁt or new build projects and is great for higher mixed hot water volumes. Lightweight stainless steel DHW cylinder makes installation easier. • Optional active cooling through reversal of the refrigerant circuit. For convenience the pack includes a heat pump management system with zone control and internet access. Internet connectivity allows remote control and fault diagnosis of the system.ASHP 7.5kW Premium / 300 Pack ASHP 7.5kW Premium / 300 PackPart number 204908Price excl. VAT £ 10,130.00 Set components ASHP 7.5kW Premium / 300 Pack1 Type SBP 100 Classic Qty 1 Heating buffer cylinder Page 1742 Type SBB 300 Trend Qty 1 DHW cylinder Page 1653 Type WPKI-HK DN 25 Qty 1 Pump assembly Page 1874 Type ISG web Qty 1 Internet Service Gateway Page 55 Type WPL-A 07 HK 230 Premium Qty 1 Air source heat pump Page 806 Type WPM Qty 1 Heat pump manager in wall mounted enclosure Page 1387 Type UP 25/7.5 PCV Qty 2 Heating circuit pump Page 1878 Type FET Qty 1 Digital remote control Page 59 Type FS-WP 28 Qty 1 Filter sets Page 130Further information about the Set components can be found under the respective product. Type SBP 100 ClassicQty 1 Page 174

Page 87

next page >Air source heat pumps, outdoor installation – inverterInverter87Product information 2025 - Subject to technical modiﬁcations.ASHP 7.5kW Premium / 225 Plus Compact PackBeneﬁts › Air source heat pump set for maximum efﬁciency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high ﬂow tempera-tures all year round › Large DHW cylinder and buffer cylinder with integral hydraulic components for heat pumps and heating circuit connection in a single casing › Including heat pump manager › Thanks to ﬂow separation, the heating system can be integrated easily and very safely › Lightweight pre-plumbed pre-wired stainless steel cylinderApplication • The pack combines our popular WPL-A 07 HK 230 Premium mono block heat pump with our pre-plumbed pre-wired stainless steel system cylinder designed for fast space saving installations. Features out-put-dependent control so your air source heat pump efﬁciently meets the demands of the property all year round. • The lightweight stainless steel cylinder has a tank on tank design giving you a small footprint and greater in-stallation ﬂexibility. • Flow temperatures of up to 75 °C are available for space heating and DHW, making the pack ideal for new build, retroﬁt projects that may use radiators, or properties with higher hot water demands. • It can be used in a wide range of systems, as the heat pump is separated from the heat distribution system by means of the buffer cylinder within the integral cylinder. The indoor module contains the following components: DHW cylinder, cylinder charging pump, circulation pump, 3/2-way diverter valve, safety valve and the heat pump manager for controlling the system. • Pack includes internet service gateway for remote system control and maintenance. Room based thermostat in-cluded for remote control.ASHP 7.5kW Premium / 225 Plus Compact Pa ASHP 7.5kW Premium / 225 Plus Compact PackPart number 206044Price excl. VAT £ 10,099.00ABA BABAB21Set components ASHP 7.5kW Premium / 225 Plus Compact Pack1 Type HSBC 225 S 1 Qty 1 Integral cylinder Page 1562 Type WPL-A 07 HK 230 Premium Qty 1 Air source heat pump Page 80Type SBP 100 ClassicQty 1 Page 174

Page 88

Page 89

next page >Air source heat pumps, outdoor installation – inverterInverter89Product information 2025 - Subject to technical modiﬁcations.WPL 20/25 ACBeneﬁts › The air source heat pump for heating and cooling is installed outdoors › Inverter technology allows ideally matched heating output through the variable speed compressor › Even at low outside temperatures, the enhanced vapour injection/enhanced saturated vapour injection of the heat pump achieves a high ﬂow temperature › Quiet operation thanks to encapsulated refrigerant circuit and variable matched fan speed › Improved room climate in summer with active cooling using circuit reversal › High efﬁciency and low operating costs all year round, thanks to optimally matched components › Low operating costs as mono mode DHW heating is possible › Can be integrated into the home network and operated via a smartphoneApplication • This air source heat pump with output-dependent control and inverter technology is installed outdoors. The compact mono block design is suitable for heating and DHW operation as well as for efﬁcient cooling by means of circuit reversal. • Can be used in modernisation projects as ﬂow temperatures of up to 65 °C are available all year round for room heating and DHW heating.Convenience features • Both the encapsulated refrigerant circuit and the acoustically isolated compressor make for quiet operation. The modulating fan and the wide gaps between the evaporator ﬁns, which reduce air resistance, also contribute to the low sound power level. • The combined enhanced vapour injection/enhanced saturated vapour injection cools the scroll compressor at low outside temperatures and achieves a higher heating output/ﬂow temper-ature. When combined with the Internet Service Gateway, the integral heat pump manager allows the system to be controlled in the home network or from a mobile device. With integral heat and electricity metering via refrigerant circuit data. • The electric emergency/auxiliary heater enables mono energetic operation. • The refrigerant circuit is hermetically sealed, tested for leaks at the factory and ﬁlled with safety refrigerant R410A. • The enamelled, corro-sion-protected metal casing is made from hot-dip galvanised, powder coated sheet steel. Fan grille, recessed grips and cover are made from weatherproof and UV-resistant plastic.Efﬁciency • The waste heat from the inverter is used to raise the return temperature. In addition, the overall efﬁ-ciency of the system is increased by on-demand defrosting through circuit reversal and heating of the condensate pan by the refrigerant circuit. • The hydrophilic coating on the fan nozzle prevents ice from forming, meaning that no electric heating is required.Installation • The integral anti-vibration mount enables the heat pump to be connected directly to the heating system. • The pivoting electrical connection panel makes installation easier. • The condensate pan can be easily reached through a cleaning aperture on the back of the casing.WPL 25 ACS WPL 25 ACSPart number 236643Price excl. VAT £ 6,579.00 Specification Energy efficiency class, heat pump W35 A+++Energy efficiency class, heat pump W55 A++Heating output at A7/W35 (EN 14511)kW 8.00Heating output at A2/W35 (EN 14511)kW 8.33Heating output at A-7/W35 (EN 14511)kW 12.86COP at A7/W35 (EN 14511) 4.82COP at A2/W35 (EN 14511) 4.14COP at A-7/W35 (EN 14511) 2.98Max. cooling capacity at A35/W7kW 14.88

Page 90

Air source heat pumps, outdoor installation – inverterInverter90Product information 2025 - Subject to technical modiﬁcations. WPL 25 ACSCooling capacity at A35/W18 partial loadkW 6.76Max. cooling capacity at A35/W18kW 17.06Energy efficiency ratio at A35/W7 max. 2.38Energy efficiency ratio at A35/W18 partial load 3.76Energy efficiency ratio at A35/W18 max. 2.83SCOP 35 °C (EN 14825) 4.53Sound power level (EN 12102) dB(A) 55Min./max. application limits for heat source°C -20-40Max. application limit on the heating side°C 65Height mm 1045Width mm 1490Depth mm 593Weight kg 175Rated voltage, compressor V 230Rated voltage, emergency/aux-iliary heaterV 230Refrigerant R410A Required accessories Part number 234727Type WPMDescription Heat pump manager in wall mounted enclosurePrice excl. VAT £ 587.00 Recommended accessories Part number 229336Type ISG webDescription Internet Service GatewayPrice excl. VAT £ 889.00Part number 233623Type AS-WP 2Description Hydraulic connection setPrice excl. VAT £ 114.00Part number 234722Type WK 2Description Wall mounting bracketPrice excl. VAT £ 490.00 DHW cylinder Part number 236917Type HSBC 200 S (GB) SetDescription Integral cylinderPrice excl. VAT £ 3,723.00 Service Part number 330567Type Guarantee check of HP (standard)Description Warranty checkPrice excl. VAT £

Page 91

Page 92

Page 93

Air source heat pumps, outdoor installation – inverterInverter93Product information 2025 - Subject to technical modiﬁcations.ASHP 14.8kW / 225 Plus Compact PackBeneﬁts › Air source heat pump set for maximum efﬁciency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high ﬂow tempera-tures all year round › DHW cylinder and buffer cylinder with integral hydraulic components including heat pump manager for heat pumps and heating circuit connection in a single casing › Including heat pump manager › Thanks to ﬂow separation, the heating system can be integrated easily and very safelyApplication • This pack combines our highest output mono block heat pump and our pre-plumbed pre-wired stainless steel system cylinder designed for fast, space saving, installations. High performing out-put-dependent control so your air source heat pump efﬁciently meets the demands of the property. • The lightweight stainless steel cylinder has a tank on tank design giving you a small footprint for greater installation ﬂexibility. • Flow temperatures of up to 65 °C are available for space heating and DHW making the pack ideal for both new builds and retroﬁt projects. Larger and older properties can be serviced by this heat pump‘s powerful output. • It can be used in a wide range of different heat distribution systems, as the heat pump is separat-ed from the heat distribution system by means of the buffer cylinder within the integral cylinder. The in-door module contains the following components: DHW cylinder, cylinder charging pump, circula-tion pump, 3/2-way diverter valve, safety valve and the heat pump manager for controlling the system. • Pack includes internet service gateway for remote online management and maintenance of the system. Room based thermostat included for remote control.ASHP 14.8kW / 225 Plus Compact Pack ASHP 14.8kW / 225 Plus Compact PackPart number 206042Price excl. VAT £ 11,578.00 Set components ASHP 14.8kW / 225 Plus Compact Pack1 Type WPL 25 ACS Qty 1 Air source heat pump Page 892 Type HSBC 225 S 1 Qty 1 Integral cylinder Page 1563 Type FET Qty 1 Digital remote control Page 54 Type ISG web Qty 1 Internet Service Gateway Page 55 Type FS-WP 28 Qty 1 Filter sets Page 130Further information about the Set components can be found under therespective product.

Page 94

Air source heat pumps, outdoor installation – inverterInverter94Product information 2025 - Subject to technical modiﬁcations.ASHP 14.8kW / 300 Premium Compact PackBeneﬁts › Large DHW cylinder and buffer cylinder with integral hydraulic components for heat pumps and heating circuit connection in a single casing › The integral WPM heat pump manager makes the system easier to install › Air source heat pump set for maximum efﬁciency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high ﬂow tempera-tures all year round › Optional active cooling by reversing the refrigerant cycleApplication • This pack includes our most powerful mono block air source heat pump with output-dependent control, paired with a highly integrated indoor module. Suitable for fast, space saving installations with active cooling. • Flow temperatures of up to 65 °C are available all year round for space heating and DHW. It is compatible with both retroﬁt and new build projects. • The integrated indoor unit makes this a fantastic option for properties that are limited on space. • It can be used in a wide range of different heat distribution systems, as the heat pump is separated from the heat distribution system by means of an integral buffer cylinder. • The compact design is suitable for heating and DHW operation as well as for efﬁcient cooling by means of circuit reversal. • The indoor module also contains the following components: DHW cylinder, cylinder charging pump, circulation pump, 3/2-way diverter valve, safety valve, electric emergency/auxiliary heater and the heat pump manager, which is used to control the system.ASHP 14.8kW / 300 Premium Compact Pack ASHP 14.8kW / 300 Premium Compact PackPart number 204912Price excl. VAT £ 13,598.00 Set components ASHP 14.8kW / 300 Premium Compact Pack1 Type WPL 25 ACS Qty 1 Air source heat pump Page 892 Type HSBC 300 cool (GB) Set Qty 1 Integral cylinder Page 1543 Type FET Qty 1 Digital remote control Page 54 Type ISG web Qty 1 Internet Service Gateway Page 55 Type FS-WP 28 Qty 1 Filter sets Page 130Further information about the Set components can be found under therespective product

Page 95

Air source heat pumps, outdoor installation – inverterInverter95Product information 2025 - Subject to technical modiﬁcations.ASHP 14.8kW / 300 PackBeneﬁts › Separate buffer cylinder for separation of ﬂow rates for maximum operational reliability › High hot water convenience due to separate DHW cylinder › Air source heat pump set for maximum efﬁciency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high ﬂow tempera-tures all year round › Optional active cooling by reversing the refrigerant cycle › Stainless steel DHW cylinder is lightweight for easy installationApplication • This Pack combines our highest output mono block air source heat pump with separate DHW and buffer cylinders. • The output dependent control can deliver up to 65 °C ﬂow temperatures all year round in both new build and retroﬁt projects. • Stainless steel DHW cylinder & separate buffer make it ideal for installations with higher hot water demands. Optional active cooling through reversal of the refrigerant circuit. • For convenience the pack includes a heat pump management system with zone control and internet access. Internet connectivity allows remote control and fault diagnosis of the system.ASHP 14.8kW / 300 Pack ASHP 14.8kW / 300 PackPart number 204913Price excl. VAT £ 11,609.00 Set components ASHP 14.8kW / 300 Pack1 Type SBP 100 Classic Qty 1 Heating buffer cylinder Page 1742 Type WPL 25 ACS Qty 1 Air source heat pump Page 893 Type SBB 300 Trend Qty 1 Page 1654 Type WPKI-HK DN 25 Qty 1 Pump assembly Page 1875 Type WPM Qty 1 Heat pump manager in wall mounted enclosure Page 1386 Type FET Qty 1 Digital remote control Page 57 Type ISG web Qty 1 Internet Service Gateway Page 58 Type UP 25/7.5 PCV Qty 2 Heating circuit pump Page 1879 Type FS-WP 28 Qty 1 Filter sets Page 130Further information about the Set components can be found under therespective product 

Page 96

Air source heat pumps, outdoor installation – inverterInverter96Product information 2025 - Subject to technical modiﬁcations.ASHP 8.5kW / 200 Plus Compact PackBeneﬁts › The air source heat pump is ideally suited to new builds › Simple operation through integrated heat pump manager › The mono block heat pump is installed outdoors and its variable speed compressor ensures perfectly matched heating output › Small footprint as just one indoor and outdoor unit is requiredApplication • The pack combines our most compact mono block heat pump with our HSBC 220, pre-plumbed pre-wired stainless steel system cylinder designed for fast space saving installations. • The lightweight stainless steel cylinder has a tank on tank design giving you a small footprint and greater installation ﬂexibility. • The heat pump can achieve ﬂow temperatures up to 60 °C and is best suited to new build projects. • Can be used in a wide range of different heat distribution systems, as the heat pump is separate from the hydraulic components made up of an integral DHW cylinder and buffer. • The indoor module contains the following components: DHW cylinder, cylinder charging pump, circulation pump, 3/2-way diverter valve, safety valve and the heat pump manager for controlling the system. • Pack includes internet service gateway for remote control and maintenance. Room based thermostat included for remote control.ASHP 8.5kW / 200 Plus Compact Pack ASHP 8.5kW / 200 Plus Compact PackPart number 206043Price excl. VAT £ 8,537.00 Set components ASHP 8.5kW / 200 Plus Compact Pack1 Type HPA-O 8 CS Plus int Qty 1 Air source heat pump Page 972 Type HSBC 220 Qty 1 Integral cylinder Page 1573 Type FET Qty 1 Digital remote control Page 54 Type ISG web Qty 1 Internet Service Gateway Page 55 Type FS-WP 22 Qty 1 Filter sets Page 130Further information about the Set components can be found under therespective product.

Page 97

next page >Air source heat pumps, outdoor installation – inverterInverter97Product information 2025 - Subject to technical modiﬁcations.HPA-O 3-8 Plus intBeneﬁts › The air source heat pump for heating and cooling new-builds is installed outdoors › Inverter technology allows ideally matched heating output through the variable speed compressor › Reduced space requirement in installation room thanks to compact outdoor unit combined with various indoor modules › Quiet operation thanks to encapsulated refrigerant circuit and variable matched fan speed › Freezing up of the compressor and blocking of the condensate drain are prevented by means of an „anti-block condensate“ (ABC design) › Can be integrated into the home network and operated via a smartphone › High hot water convenience with large mixed water amount due to high ﬂow temperature › Straightforward hydraulic connection due to integral anti-vibration mounts › The air source heat pump is ideally suited to new buildsApplication • This air source heat pump with output-dependent control and inverter technology is designed as a compact mono block appliance for outdoor installation. • The heat pump can be used in new build and buildings with a low system temperature for heating and DHW operation as well as for efﬁcient cooling. • To ensure simple and space saving installation in the building, the heat pump is supplied in a set with compact and ideally matched indoor units.Convenience features • Quiet operation thanks to the encapsulated refrigerant circuit and acoustically isolated com-pressor. With integral heat and electricity metering via refrigerant circuit data.Efﬁciency • The waste heat from the inverter raises the return temperature which, together with demand-dependent defrosting by circuit reversal, signiﬁcantly increases the overall efﬁciency of the system.Installation • Thanks to the integral anti-vibration mounts, the heat pump can be connected directly to the heat-ing system. Extensive accessories are available for both ﬂoor or wall mounted installations. This ensures that any condensate can drip off easily. • The electrical connection panel is easy to access, without having to open the unit.HPA-O 8 CS Plus int HPA-O 8 CS Plus intPart number 239171Price excl. VAT £ 3,417.00 Specification Energy efficiency class, heat pump W35 A+++Energy efficiency class, heat pump W55 A++Heating output at A7/W35 (EN 14511)kW 4.86Heating output at A2/W35 (EN 14511)kW 5.73Heating output at A-7/W35 (EN 14511)kW 7.80COP at A7/W35 (EN 14511) 4.76COP at A2/W35 (EN 14511) 3.97COP at A-7/W35 (EN 14511) 2.92Max. cooling capacity at A35/W7kW 6.00Cooling capacity at A35/W18 partial loadkW 3.00Max. cooling capacity at A35/W18kW 6.00Energy efficiency ratio at A35/W7 max. 1.73Energy efficiency ratio at A35/W18 partial load 3.28Energy efficiency ratio at A35/W18 max. 2.88SCOP 35 °C (EN 14825) 4.48Sound power level (EN 12102) dB(A) 57Min./max. application limits for heat source°C -20-40Max. application limit on the heating side°C 60

Page 98

Page 99

Page 100

Page 101

Page 102

Accessories for air source heat pumps installed outdoorsInstallation accessoriesAccessories for air source heat pumps installed outdoorsInstallation accessories102Product information 2025 - Subject to technical modiﬁcations.AS WPBeneﬁts › Hydraulic connection set › White painted coverDescription • The connection set for supply lines from the ground is supplied with a painted cover that protects against the elements.AS-WP 2 AS-WP 2Part number 233623Price excl. VAT £ 114.00 Specification Connection G 1 1/4 WKBeneﬁts › Includes ribbon heater to keep condensate connection free from frost (Product: 234722)Description • The wall mounting brackets are made of corrosion-protected, zinc-plated steel. • Height-adjustable wall rails; the heat pump can be aligned with the aid of these appliance rails. • The set consists of two wall mounting brackets, which are supplied including anti-vibration mounts.WK 2 WK 2Part number 234722Price excl. VAT £ 490.00 Specification Weight load kg 200Heated length mm 2000Connecting of connecting cable mm 2000

Page 103

Accessories for air source heat pumps installed outdoorsInstallation accessories103Product information 2025 - Subject to technical modiﬁcations.WK 1.1Beneﬁts › 2 wall mounting brackets for installing a heat pump including anti-vibration mounts › Weight load max. 120kg › Support length: 750mm › Corrosion protection thanks to zinc-plated steelDescription • The wall mounting brackets are made of corrosion-protected, zinc-plated steel. • Height-adjustable wall rails; the heat pump can be aligned with the aid of these appliance rails. • The set consists of two wall mounting brackets, which are supplied including anti-vibration mounts.WK 1.1 WK 1.1Part number 238686Price excl. VAT £ 204.00 Specification Weight load kg 120    SK 2Beneﬁts › Set with 2 robust brackets › Powder coated in white › Height: 303mm, width: 450mmDescription • The powder coated bracket allows the heat pump to be secured to a strip foundation. • The set consists of two supports incl. the screws for securing the heat pump.SK 2 SK 2Part number 236693Price excl. VAT £ 105.00 Specification Height mm 303Weight load kg 91 Standard delivery includes: 2 pce, incl. screws for securing the heat pump to the bracket.

Page 104

Page 105

Page 106

Ground source heat pumps – inverter Application areasGround source heat pumps – inverterApplication areas106Product information 2025 - Subject to technical modiﬁcations. Heating Cooling kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 WPE-I 04 HW 230 GB Premium WPE-I 06 HW 230 GB Premium WPE-I 08 HW 230 GB Premium WPE-I 12 HW 230 GB Premium WPE-I 15 HW 230 GB Premium kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 WPE-I 04 HK 230 Premium WPE-I 06 HK 230 Premium WPE-I 08 HK 230 Premium WPE-I 12 HK 230 Premium WPE-I 15 HK 230 Premium kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 WPE-I 07.1 Plus H 230 WPE-I 12.1 Plus H 230 kW 0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78 81 84 87 90 93 96 99 102 105 108 111 114 117 120 WPE-I 33 H 400 Premium WPE-I 44 H 400 Premium WPE-I 59 H 400 Premium WPE-I 87 H 400 Premium

Page 107

Page 108

next page >Ground source heat pumps – inverter InverterGround source heat pumps – inverterInverter108Product information 2025 - Subject to technical modiﬁcations.WPE-I 04-15 HW 230 GB PremiumBeneﬁts › High hot water convenience and mono mode heating thanks to high ﬂow temperatures of up to 75°C › Pressure monitoring in the heat source circuit with integral brine pressure switch › Quick, space saving installation thanks to built-in DHW cylinder and high level of integration › Inverter technology allows ideally matched heating output through the variable speed compressor › Very quiet operation thanks to the intelligent sound prevention concept including a number of anti-vibration mounts › Futureproof and eco-friendly refrigerant with high efﬁciency › Easy to transport as the refrigerant circuit and cylinder module can be separated from one another and are ﬁtted with integral carrying handlesApplication • This ground source heat pump with output-dependent control and inverter technology is installed indoors. • The high level of integration simpliﬁes installation whilst the small installation area means that it does not take up much space. • The heat pump can be used in modernisation projects as ﬂow temperatures of up to 75 °C are available all year round for room heating and DHW heating. • Mono mode is possible for both heating and DHW heating.Convenience features • Quiet operation, due to encapsulated refrigerant circuit and acoustically isolated compressor. • The integral heat pump manager ensures fully automatic, weather-compensated control of the heating system. Control via the home network or from a mobile device is possible via the optional Internet Service Gateway. With integral heat and electricity metering via refrigerant circuit data. • High level of integration: high efﬁciency circulation pumps and expansion vessels for the brine and heating side are included. Also integrated are the electric emergency/auxiliary heater for mono energetic operation and pasteurisation, the heating diverter valve for DHW heating and a safety valve with drain pipe. • The refrigerant circuit works with the eco-friendly and futureproof refrigerant R454C whose properties are optimised for use in heat pumps. • The corrosion-protected, enamelled metal casing is made from hot-dip galvanised, powder coated sheet steel. Efﬁciency • Optimum operation and high efﬁciency all year round thanks to the inverter and integral recuperator.Installation • Carrying handles are provided on the back panel for easy transport. No special safety precautions are required when siting. Only a minimum room size must be ensured. Internal pressure hoses enable direct hydraulic connection to the heating and brine circuits. For easy installation, the hydraulic connections are equipped with quick-release ﬁttings and are thermally insulated.WPE-I 04 HW 230 GB Premium WPE-I 04 HW 230 GB PremiumWPE-I 06 HW 230 GB PremiumWPE-I 08 HW 230 GB PremiumWPE-I 12 HW 230 GB PremiumWPE-I 15 HW 230 GB PremiumPart number 202637 202638 202639 202640 202641Price excl. VAT £ 9,839.00 9,944.00 10,444.00 11,910.00 12,692.00 Specification Energy efficiency class, heat pump W35 A+++ A+++ A+++ A+++ A+++Energy efficiency class, heat pump W55 A+++ A+++ A+++ A+++ A+++Heating output at B0/W35 (EN 14511)kW 1,96 2,37 2,78 4,19 5,18Cylinder volume V l 175 175 175 162 162Heating output at B0/W35 (min./max.)kW 1,0-4,2 1,0-6,6 1,0-7,6 2,1-12,7 2,1 - 14,8COP at B0/W35 (EN 14511) 4.60 4.60 4.67 5.01 4.86SCOP 35 °C (EN 14825) 5.07 5.20 5.12 5.59 5.44Sound power level (EN 12102) dB(A) 43-46 43-48 43-48 43-49 43 - 49Height mm 1937 1937 1937 1937 1937Width mm 600 600 600 600 600Depth mm 703 703 703 703 703Nominal capacity l 175 175 175 162 162Weight kg 265 265 265 275 275Rated voltage, compressor V 230 230 230 230 230Rated voltage, emergency/aux-iliary heaterV 230 230 230 230 230

Page 109

Ground source heat pumps – inverterInverter109Product information 2025 - Subject to technical modiﬁcations. WPE-I 04 HW 230 GB PremiumWPE-I 06 HW 230 GB PremiumWPE-I 08 HW 230 GB PremiumWPE-I 12 HW 230 GB PremiumWPE-I 15 HW 230 GB PremiumRefrigerant R454C R454C R454C R454C R454CSurface area, heat exchanger m² 2.10 2.10 2.10 3.50 3.50Energy efficiency class, DHW heating with load profile XL A A A A A Recommended accessories Part number 229336 229336 229336 229336 229336Type ISG web ISG web ISG web ISG web ISG webDescription Internet Service GatewayInternet Service GatewayInternet Service GatewayInternet Service GatewayInternet Service GatewayPrice excl. VAT £ 889.00 889.00 889.00 889.00 889.00Part number 233307 233307 233307 233307 233307Type WPSF WPSF WPSF WPSF WPSFDescription WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit Price excl. VAT £ 313.00 313.00 313.00 313.00 313.00 Service Part number 330567 330567 330567 330567 330567Type Guarantee check of HP (standard)Guarantee check of HP (standard)Guarantee check of HP (standard)Guarantee check of HP (standard)Guarantee check of HP (standard)Description Warranty check Warranty check Warranty check Warranty check Warranty checkPrice excl. VAT £ More details regarding the Set components can be found under the relevant product

Page 110

Ground source heat pumps – inverterInverter110Product information 2025 - Subject to technical modiﬁcations. ≥500≥200≥1000≥50≥500Minimum clearance diagramD0000033992.aiGSHP 8-15kW / 162-175 Compact PackBeneﬁts › Mono mode operation possible for heating and DHW thanks to higher ﬂow temperatures › Inverter technology allows ideally matched heating output through the variable speed compressor › Easy and time saving installation, due to high level of integration and inclusion of accessories › Easy to transport as the refrigerant circuit and cylinder module can be separated from one another and are ﬁtted with integral carrying handles › Buffer cylinder to separate the ﬂows for maximum operational reliabilityApplication • This compact ground source heat pump with output-dependent control and inverter technology is in-stalled indoors. It has an integral DHW cylinder and is combined with a separate buffer cylinder. • Thanks to the very high ﬂow temperatures of up to 75 °C, the heat pump can be used in both new build and modernisation.A heat pump controller is integrated for fully automatic, weather-compensated control of the heating system. • Both the brine and heating sides are equipped with a high efﬁciency circulation pump. • An insulated pump assembly supplies the heat distribution system.GSHP 8kW / 175 Compact Pack GSHP 8kW / 175 Compact Pack GSHP 12kW / 162 Compact Pack GSHP 15kW / 162 Compact PackPart number 204401 204403 204408Price excl. VAT £ 13,083.00 14,549.00 15,331.00

Page 111

next page >Ground source heat pumps – inverterInverter111Product information 2025 - Subject to technical modiﬁcations.Set components GSHP 8kW / 175 Compact Pack GSHP 12kW / 162 Compact Pack GSHP 15kW / 162 Compact Pack1 Type WPKI-HKM 230 DN 25 WPKI-HKM 230 DN 25 WPKI-HKM 230 DN 25 Qty 1 1 1 Heating circuit assembly with mixing valve for heating circuit with mixerHeating circuit assembly with mixing valve for heating circuit with mixerHeating circuit assembly with mixing valve for heating circuit with mixer Page 189 189 1892 Type SBP 100 Classic SBP 100 Classic SBP 100 Classic Qty 1 1 1 Heating buffer cylinder Heating buffer cylinder Heating buffer cylinder Page 174 174 1743 Type WPE-I 08 HW 230 GB Premium WPE-I 12 HW 230 GB Premium WPE-I 15 HW 230 GB Premium Qty 1 1 1 Ground source heat pump Ground source heat pump Ground source heat pump Page 108 108 1084 Type WPSF WPSF WPSF Qty 1 1 1 WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit Page 128 128 1285 Type FS-WP 22 FS-WP 22 FS-WP 22 Qty 1 1 1 Filter sets Filter sets Filter sets Page 130 130 1306 Type FET FET FET Qty 1 1 1 Digital remote control Digital remote control Digital remote control Page 5 5 57 Type ISG web ISG web ISG web Qty 1 1 1 Internet Service Gateway Internet Service Gateway Internet Service Gateway Page 5 5 5 GSHP 8-15kW / 300 PackBeneﬁts › Mono mode operation possible for heating and DHW thanks to higher ﬂow temperatures › Inverter technology allows ideally matched heating output through the variable speed compressor › Easy and time saving installation, due to high level of integration and inclusion of accessories › Buffer cylinder to separate the ﬂows for maximum operational reliability › Separate DHW cylinder for a high level of hot water convenience › Integral passive coolingApplication • This ground source heat pump with output-dependent control and inverter technology is installed in-doors and combined with a separate buffer and DHW cylinder. • The heat pump can be used in modernisation projects as high ﬂow temperatures of up to 75 °C are available all year round for room heating and DHW heating. Passive cooling is integrated. • The integral heat pump manager enables fully automatic, weather-compensated control of the heating system. • High efﬁciency circulation pumps and expansion vessels are provided for both the brine side and the heating side. • An insulated pump assembly supplies the heat distribution system.GSHP 8kW / 300 Pack GSHP 8kW / 300 Pack GSHP 12kW / 300 Pack GSHP 15kW / 300 PackPart number 204402 204407 204404Price excl. VAT £ 14,116.00 15,581.00 17,638.00 Set components GSHP 8kW / 300 Pack GSHP 12kW / 300 Pack GSHP 15kW / 300 Pack1 Type SBB 300 Trend SBB 300 Trend SBB 300 Trend Qty 1 1 1 Page 165 165 165

Page 112

Ground source heat pumps – inverterInverter112Product information 2025 - Subject to technical modiﬁcations.Set components GSHP 8kW / 300 Pack GSHP 12kW / 300 Pack GSHP 15kW / 300 Pack2 Type SBP 100 Classic SBP 100 Classic SBP 100 Classic Qty 1 1 1 Heating buffer cylinder Heating buffer cylinder Heating buffer cylinder Page 174 174 1743 Type WPKI-HKM 230 DN 25 WPKI-HKM 230 DN 25 WPKI-HKM 230 DN 25 Qty 1 1 1 Heating circuit assembly with mixing valve for heating circuit with mixerHeating circuit assembly with mixing valve for heating circuit with mixerHeating circuit assembly with mixing valve for heating circuit with mixer Page 189 189 1894 Type WPE-I 08 HK 230 Premium WPE-I 12 HK 230 Premium WPE-I 15 HK 230 Premium Qty 1 1 1 Inverter ground source heat pump Inverter ground source heat pump Inverter ground source heat pump Page 113 113 1136 Type WPSF WPSF WPSF Qty 1 1 1 WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit Page 128 128 1287 Type FS-WP 28 FS-WP 28 FS-WP 28 Qty 2 2 2 Filter sets Filter sets Filter sets Page 130 130 1308 Type UP 25-60-180 UP 25-60-180 UP 25-60-180 Qty 1 1 1 Circulation pump for external DHW heatingCirculation pump for external DHW heatingCirculation pump for external DHW heating Page 186 186 1869 Type FET FET FET Qty 1 1 1 Digital remote control Digital remote control Digital remote control Page 5 5 58 Type ISG web ISG web ISG web Qty 1 1 1 Internet Service Gateway Internet Service Gateway Internet Service Gateway Page 5 5 59 Type TAF PT 2m TAF PT 2m TAF PT 2m Qty 1 2 2 Immersion/contact sensor Immersion/contact sensor Immersion/contact sensor Page 133 133 133More details regarding the Set components can be found under the relevant product

Page 113

next page >Ground source heat pumps – inverterInverter113Product information 2025 - Subject to technical modiﬁcations.WPE-I 04-15 HK 230 PremiumBeneﬁts › Inverter technology allows ideally matched heating output through the variable speed compressor › Passive cooling function with minimal operating costs via a geothermal probe system › Futureproof and eco-friendly refrigerant with high efﬁciency › High hot water convenience and mono mode heating thanks to high ﬂow temperatures of up to 75°C › Easy and time saving installation with high level of integration › Very quiet operation thanks to the intelligent sound prevention concept including a number of anti-vibration mounts › Pressure monitoring in the heat source circuit with integral brine pressure switchApplication • This ground source heat pump with output-dependent control and inverter technology is installed indoors. • The high level of integration facilitates installation. Does not take up much space thanks to the small in-stallation area. • With the heat pump, energy efﬁcient passive cooling via the underﬂoor heating system is possible thanks to the integral intermediate heat exchanger. • The heat pump can be used in modernisation projects as ﬂow temperatures of up to 75 °C are available all year round for room heating and DHW heating. • Mono mode is possible for both heating and DHW heating.Convenience features • Quiet operation, due to encapsulated refrigerant circuit and acoustically isolated compressor. • Fully automatic, weather-compensated control of the heating system is assured by the integral heat pump manager. Control via the home network or from a mobile device is possible via the optional Internet Service Gateway. • With integral heat and electricity metering via refrigerant circuit data. • High level of integration: high efﬁciency circulation pumps and expansion vessels for the brine and heating side are included. Also integrated are the electric emergency/auxiliary heater for mono energetic operation and pasteurisation, the diverter valve for DHW heating and a safety valve with drain pipe. • The refrigerant circuit works with the eco-friendly and futureproof refrigerant R454C whose properties are optimised for use in heat pumps. • The corrosion-protected, enamelled metal casing is made from hot-dip galvanised, powder coated sheet steel.Efﬁciency • Optimum operation and high efﬁciency all year round are provided by the inverter and integral recuperator.Installation • Carrying handles are provided on the back panel for easy transport. No special safety precautions are required when siting. A minimum room size must be ensured. Internal pressure hoses enable direct hydraulic connection to the heating and brine circuits. For easy installation, the hydraulic connections are equipped with quick-release ﬁttings and are thermally insulated.WPE-I 04 HK 230 Premium WPE-I 04 HK 230 PremiumWPE-I 06 HK 230 PremiumWPE-I 08 HK 230 PremiumWPE-I 12 HK 230 PremiumWPE-I 15 HK 230 PremiumPart number 202615 238614 238615 238616 238617Price excl. VAT £ 8,682.00 8,787.00 9,286.00 10,751.00 12,808.00 Specification Energy efficiency class, heat pump W35 A+++ A+++ A+++ A+++ A+++Energy efficiency class, heat pump W55 A+++ A+++ A+++ A+++ A+++Energy efficiency class, com-posite system (heat pump + controller) W55 A+++ A+++ A+++ A+++ A+++Heating output at B0/W35 (EN 14511)kW 1,96 2,37 2,78 4,19 5,18Heating output at B0/W35 (min./max.)kW 1,0-4,2 1,0-6,6 1,0 - 7,6 2,1-12,7 2,1-14,8COP at B0/W35 (EN 14511) 4.60 4.60 4.67 5.01 4.86Cooling capacity at B15/W23 kW 3 4 SCOP 35 °C (EN 14825) 5.07 5.20 5.12 5.59 5.44Sound power level (EN 12102) dB(A) 38-40 38-43 38-45 39-46 39-47Max. application limit on the heating side°C 75 75 75 75 75Height mm 1369 1369 1369 1369 1369Width mm 598 598 598 598 598

Page 114

Ground source heat pumps – inverterInverter114Product information 2025 - Subject to technical modiﬁcations. WPE-I 04 HK 230 PremiumWPE-I 06 HK 230 PremiumWPE-I 08 HK 230 PremiumWPE-I 12 HK 230 PremiumWPE-I 15 HK 230 PremiumDepth mm 658 658 658 695 658Weight kg 180 180 180 190 190Rated voltage, compressor V 230 230 230 230 230Rated voltage, emergency/aux-iliary heaterV 230 230 230 230 230Refrigerant R454C R454C R454C R454C R454CConnection, heating side 28 mm 28 mm 28 mm 28 mm 28 mmConnection, heat source side 28 mm plug-in con-nection28 mm plug-in con-nection28 mm plug-in con-nection28 mm plug-in con-nection28 mm plug-in con-nection Recommended accessories Part number 229336 229336 229336 229336 229336Type ISG web ISG web ISG web ISG web ISG webDescription Internet Service GatewayInternet Service GatewayInternet Service GatewayInternet Service GatewayInternet Service GatewayPrice excl. VAT £ 889.00 889.00 889.00 889.00 889.00Part number 233307 233307 233307 233307 233307Type WPSF WPSF WPSF WPSF WPSFDescription WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit Price excl. VAT £ 313.00 313.00 313.00 313.00 313.00 Service Part number 330567 330567 330567 330567 330567Type Guarantee check of HP (standard)Guarantee check of HP (standard)Guarantee check of HP (standard)Guarantee check of HP (standard)Guarantee check of HP (standard)Description Warranty check Warranty check Warranty check Warranty check Warranty checkPrice excl. VAT £ Notice: Heat source temperatures of up to 40 °C are permissible brieﬂy (max. 30 min).

Page 115

Page 116

Page 117

Page 118

next page >Ground source heat pumps – inverterInverter118Product information 2025 - Subject to technical modiﬁcations.WPE-I 07.1-12.1 Plus H (230)Beneﬁts › Ground source heat pump with inverter technology, installed indoors for heating and hot water › Natural, futureproof and eco-friendly refrigerant R290 › Trouble-free operation with VDE-tested safety features › Cascade operation with up to six heat pumps if required › Low space requirement in the installation room thanks to integral safety valves, circulation pumps for brine and heating, diverter valve › Active or passive cooling possible with additional components › Optimisation according to dynamic electricity tariffs is possible › Also suitable for modernisation thanks to 70°C ﬂow temperature › Fast and correct remote maintenance thanks to integration into ServiceweltApplication • This ground source heat pump with inverter technology is suitable for heating and optional cooling of family houses as well as for DHW heating. • Thanks to the high ﬂow temperatures all year round, the heat pump can be used in both new build and modernisation. • The system uses the natural and futureproof refrigerant R290 for optimum environmental compatibility. • The heat pump can also be used for cooling with additional external components. Cascade operation is possible with up to 6 appliances.Convenience features • The heat pump in a design casing is installed indoors. • The low space requirement is achieved by the high level of integration: inside the compact casing, the unit is equipped as standard with a controller and hydraulic components such as a diverter valve, circulation pumps (source and sink), electric emergency/auxiliary heater and safety valves (source and sink). • Intuitive operation via the easy-to-read colour touchscreen. Control with mobile devices via the MyStiebel app is also possible. • The heat pump is very quiet in operation as the refrigerant circuit is mounted on an anti-vibration base plate. This minimises the transfer of structure-borne sound to the building. • Active cooling is possible through external circuit reversal; for passive cooling an additional external plate heat exchanger is required. • The heat pump can be operated without a buffer cylinder.Efﬁciency • The inverter technology and variable speed circulation pumps ensure high efﬁciency and low subsequent costs. • Optimisation using dynamic electricity tariffs is possible.Safety • The sophisticated safety features require only one vent pipe to the outside, despite the use of R290. The safety fan is already integrated into the heat pump. The core hole of 80 mm can be drilled by a qualiﬁed contractor without specialised knowledge. • An accessory set with ﬂexible pipe and wall outlet is available for simple connection of the heat pump to the vent pipe.Installation • The heat pump is easy to transport to the installation site due to its low weight and ergonomic design. • Thanks to the sophisticated safety features, only one air duct to the outside is required. No additional electronics or cables are required. • The system‘s high level of integration means that installation is quick and easy.WPE-I 07.1 Plus H 230 WPE-I 07.1 Plus H 230 WPE-I 12.1 Plus H 230 NEW NEWPart number 207183 207184Price excl. VAT £ 9,286.00 10,751.00 Specification Energy efficiency class, heat pump W35 A+++ A+++Energy efficiency class, heat pump W55 A+++ A+++Heating output at B0/W35 (EN 14511)kW 3,36 6,20Heating output at B0/W35 (min./max.)kW 1,4/7,0 2,7/11,6COP at B0/W35 (EN 14511) 4.62 4.87SCOP 35 °C (EN 14825) 5.21 5.40Sound power level (EN 12102) dB(A) 38 40Height mm 1450 1450Width mm 600 600Depth mm 700 700Weight kg 111 132Rated voltage, compressor V 230 400

Page 119

Ground source heat pumps – inverterInverter119Product information 2025 - Subject to technical modiﬁcations. WPE-I 07.1 Plus H 230 WPE-I 12.1 Plus H 230Rated voltage, emergency/aux-iliary heaterV 400 400Refrigerant R290 R290Connection, heating side 28 mmConnection, heat source side 28 mm Recommended accessories Part number 207742 207742Type AHP-PH AHP-PHDescription Pipe set for the integration of external heat meters with spacing of 130 mm.Pipe set for the integration of external heat meters with spacing of 130 mm.Price excl. VAT £ 200.00 200.00Part number 207743 207743Type AWG 80 AWG 80Description Accessory set consisting of DN80 wall outlet for external walls up to 550 mm thick, weather grille, rodent guard, check valve and two 5 m DN80 aluminium flexible pipes. Ideal for extract air ducts of ground source heat pumps smaller than 20 kW with natural refrigerant.Accessory set consisting of DN80 wall outlet for external walls up to 550 mm thick, weather grille, rodent guard, check valve and two 5 m DN80 aluminium flexible pipes. Ideal for extract air ducts of ground source heat pumps smaller than 20 kW with natural refrigerant.Price excl. VAT £ 515.00 515.00Part number 207744 207744Type AHP-TC AHP-TCDescription Design panel that can be attached to the top of the ground source heat pump using magnetic fixings.Design panel that can be attached to the top of the ground source heat pump using magnetic fixings.Price excl. VAT £ 140.00 140.00Part number 233307 Type WPSF Description WPSF multifunction brine filling unit Price excl. VAT £ 313.00 DHW cylinder Part number 202923 Type SBB 300-1 Plus GB Description DHW cylinder Price excl. VAT £ 1,489.00 Service Part number 330567 330567Type Guarantee check of HP (standard) Guarantee check of HP (standard)Description Warranty check Warranty checkPrice excl. VAT £

Page 120

Page 121

next page >Ground source heat pumps – inverterInverter121Product information 2025 - Subject to technical modiﬁcations.WPE-I 33-87 H 400 PremiumBeneﬁts › Particularly efﬁcient DHW heating using hot gas technology › Inverter technology allows ideally matched heating output through the variable speed compressor › Highly versatile, as both cascade control and dual mode integration are possible › Intuitive operation via colour touchscreen › Easy to integrate thanks to various BMS interfacesApplication • This ground source heat pump with output-dependent control and inverter technology is installed indoors. • The heat pump is suitable for apartment buildings and commercial premises. • With the help of additional hydraulic components, the existing source system can be used for passive and active cooling, or for simultaneous heating and cooling. • It can be used in mono mode for heating and DHW operation. • Up to 16 heat pumps can be operated in a cascade to achieve the required heating output.Convenience features • The heat pump can be installed in different types of buildings. The integral inverter contin-uously adjusts the heating output to match the current energy demand, which ensures ﬂexibility in the application range. • One high efﬁciency circulation pump is provided for the brine side and one for the heating side. • The hot gas technology enables simultaneous DHW heating via an additional heat exchanger. • Fully automatic, weather-com-pensated control of the heating system is taken care of by the integral heat pump manager with colour touchscreen. There is also optional provision for external control of the heating system via a building management system. • To minimise the transfer of structure-borne sound to the building, the refrigerant circuit is mounted on an anti-vibration base plate and its internal hydraulic connections are ﬂexible. • The refrigerant circuit is hermetically sealed, tested for leaks at the factory and ﬁlled with safety refrigerant R410A.Efﬁciency • The heat pump‘s all year round demand-dependent output provision is ensured by the integral inverter which also enables the system to operate very efﬁciently. • The hot gas technology included as standard ensures high DHW temperatures with very good efﬁciency and at low cost.Installation • The vertical design means that only a small installation space is required. • The high level of integration enables quick and simpliﬁed installation, even with larger systems. The appliances are fully installed and delivered ready for operation. • Internal pressure hoses are provided for direct hydraulic connection to the heating and brine circuits.WPE-I 33 H 400 Premium WPE-I 33 H 400 Premium WPE-I 44 H 400 Premium WPE-I 59 H 400 Premium WPE-I 87 H 400 PremiumPart number 201412 201413 201414 201415Price excl. VAT £ 22,564.00 25,069.00 28,831.00 33,844.00 Specification Energy efficiency class, heat pump W35 A+++ A+++ A+++ A+++Energy efficiency class, heat pump W55 A+++ A+++ A+++ A+++Energy efficiency class, com-posite system (heat pump + controller) W55 A+++ A+++ A+++ A+++Heating output at B0/W35 (EN 14511)kW 20,18 26,71 35,60 52,00Heating output at B0/W35 (min./max.)kW 10-33 11-44 14-59 21-87COP at B0/W35 (EN 14511) 4.73 4.60 4.50 4.71SCOP 35 °C (EN 14825) 5.55 5.65 5.19 5.17Sound power level (EN 12102) dB(A) 41-56 41-56 46-61 46-63Max. application limit on the heating side°C 65 65 65 65Height mm 1723 1723 1742 1742Width mm 692 692 900 900Depth mm 803 803 848 848Weight kg 300 300 430 550Rated voltage, compressor V 400 400 400 400Refrigerant R410A R410A R410A R410A

Page 122

next page >Ground source heat pumps – inverterInverter122Product information 2025 - Subject to technical modiﬁcations. WPE-I 33 H 400 Premium WPE-I 44 H 400 Premium WPE-I 59 H 400 Premium WPE-I 87 H 400 PremiumConnection, heating side 35 mm 35 mm 42 mm 42 mmConnection, hot gas mm 28 28 28 28Connection, heat source side 42 mm 42 mm 54 mm 54 mm Recommended accessories Part number 201715 201715 201715 201715Type EM 33-87 EM 33-87 EM 33-87 EM 33-87Description Extension module for WPMGExtension module for WPMGExtension module for WPMGExtension module for WPMGPrice excl. VAT £ 471.00 471.00 471.00 471.00Part number 201716 201716 201716 201716Type HG Set 33-87 HG Set 33-87 HG Set 33-87 HG Set 33-87Description Hot gas set Hot gas set Hot gas set Hot gas setPrice excl. VAT £ 558.00 558.00 558.00 558.00Part number 201767 201767 201767 201767Type FEG FEG FEG FEGDescription Digital remote control Digital remote control Digital remote control Digital remote controlPrice excl. VAT £ 227.00 227.00 227.00 227.00Part number 202062 202062 202062 202062Type EMW EMW EMW EMWDescription Extension module with wall mounted enclosureExtension module with wall mounted enclosureExtension module with wall mounted enclosureExtension module with wall mounted enclosurePrice excl. VAT £ 575.00 575.00 575.00 575.00Part number 202099 202099 202099 202099Type FEW FEW FEW FEWDescription Room temperature sensor for WPMGRoom temperature sensor for WPMGRoom temperature sensor for WPMGRoom temperature sensor for WPMGPrice excl. VAT £ 352.00 352.00 352.00 352.00Part number 202779 202779 202779 202779Type FSHP-L45 FSHP-L45 FSHP-L45 FSHP-L45Description Flow switch Flow switch Flow switch Flow switchPrice excl. VAT £ 672.00 672.00 672.00 672.00Part number 221382 221382 221382 221382Type DWS1 DWS1 DWS1 DWS1Description Brine pressure switch Brine pressure switch Brine pressure switch Brine pressure switchPrice excl. VAT £ 91.00 91.00 91.00 91.00Part number 229336 229336 229336 229336Type ISG web ISG web ISG web ISG webDescription Internet Service Gateway Internet Service Gateway Internet Service Gateway Internet Service GatewayPrice excl. VAT £ 889.00 889.00 889.00 889.00 Buffer cylinder Part number 203765 203765 Type STH 720 Plus STH 720 Plus Description Buffer cylinder Buffer cylinder Price excl. VAT £ 1,821.00 1,821.00 Part number 227564 Type SBP 1000 E Description Buffer cylinder Price excl. VAT £ 1,972.00 Part number 227565Type SBP 1500 EDescription Buffer cylinderPrice excl. VAT £ 2,073.00

Page 123

Page 124

Page 125

Page 126

Page 127

Page 128

next page >Accessories for ground source heat pumpsAccessoriesAccessories for ground source heat pumpsAccessories128Product information 2025 - Subject to technical modiﬁcations.UPFBeneﬁts › Reliable and energy efﬁcient brine circulation pump › Electronic closed-loop control › Insulation shell included in delivery › with connecting cable and non-return valve (Product: 232532)Description • Circulation pump with vapour diffusion-proof thermal insulation. Energy efﬁcient thanks to integral electronic output control for constant or variable differential pressure. The circulation pump is suitable for operation on the heat source side of ground source heat pumps.UPF 30/1-8 E UPF 30/1-8 E UPF 40/1-8 E UPF 50/1-12 EPart number 232532 227413 227414Price excl. VAT £ 653.00 1,625.00 2,031.00 Specification Energy Efficiency Index EEI 0.23 0.23 0.23Connection G 2 DN 40 DN 50Delivery head m 8.00 8.00 12.00Max. flow rate m³/h 8.00 15.00 29.00Power consumption W 8-130 12-310 25-590Rated voltage V 230 230 230Control via 0-10 V signal with IF module - - -Control via differential pressure x x xControl via PWM signal - - -Installation length (centre distance)mm 180 220 280 WPSFBeneﬁts › Multifunction brine ﬁlling unit › Both microbubble separator and ﬁlter already integrated › Easily removable ﬁlter element › Preassembled components for source side › Microbubble separator and ﬁlter already integrated (Product: 233307) › Filter element easy to remove (Product: 233307) › All important components for the source side are pre-assembled (Product: 233307)Description • This multifunction ﬁlling unit can be used for ground source heat pumps with a heating output of up to 16 kW. It is used to ﬁll or ﬂush the brine circuit and facilitates easy and quick installation on the heat source side. • The standard delivery includes the brine safety valve, pressure gauge, ﬁlter, quick-action air vent valve, microbubble separator and vapour diffusion-proof insulation.WPSF WPSFPart number 233307Price excl. VAT £ 313.00

Page 129

Accessories for ground source heat pumpsAccessories129Product information 2025 - Subject to technical modiﬁcations. WPSFSpecification Connection, heat source side G 1 1/4 ASafety valve response pressure MPa 0.30Max. application limit, heat source°C 40Min. application limit, heat source°C -5Max. operating pressure MPa 0.60 DWSBeneﬁts › Adjustable switching pointDescription • The brine pressure switch for geothermal collectors and probes is used in accordance with VDI 4640 for leak detection. • The switching point can be set between 0.08 MPa and 0.15 MPa. • If an audible or visual signal is required, an additional appropriate signal transmitter can be installed.DWS1 DWS1 NEWPart number 221382Price excl. VAT £ 91.00 Included in standard delivery: pressure hose AGBeneﬁts › Colour: white › For ﬂoorstanding installation (Product: 235221)Description • The brine-resistant diaphragm expansion vessel for ground source heat pumps has a rolling diaphragm for pressure maintenance and volume compensation for the heat source side.MAG 12 MAG 12 MAG 18 MAG 25 MAG 50Part number 235218 235219 235220 235221Price excl. VAT £ 69.00 77.00 91.00 137.00 Specification Expansion vessel l 12 18 25 50Pre-charge pressure bar 0.50 0.50 0.50 0.50

Page 130

Accessories for ground source heat pumpsAccessories130Product information 2025 - Subject to technical modiﬁcations.FS-WPBeneﬁts › Easily removable ﬁlter element › Brass body › Can be installed vertically or horizontally › With backﬂushing facility (Product: 233511) › With a removable ﬁlter (Product: 233512)Description • The ﬁlter to protect the ground source heat pump against impurities is installed in the return of the heat generator.FS-WP 22 FS-WP 22 FS-WP 28Part number 233511 233512Price excl. VAT £ 78.00 134.00 Specification Connection G 1 A / Cu 22 x 1 G 1 1/4 A / Cu 28 x 1.5 EM 33-87Beneﬁts › Extension module for extended WPMG controller functions › Suitable for installation in the heat pumpDescription • The extension module is used for actuating other functions and integrating additional heating circuits or heat generators, for example.EM 33-87 EM 33-87Part number 201715Price excl. VAT £ 471.00

Page 131

Page 132

Page 133

Accessories for ground source heat pumpsAccessories133Product information 2025 - Subject to technical modiﬁcations.TAF PTDescription • The PT 1000 sensor is used in heat pump systems as an immersion or contact sensor.TAF PT 2m TAF PT 2mPart number 235996Price excl. VAT £ 31.00 Specification Version Temperature sensorWith supply line •Colour whiteDiameter mm 6 (Product: 235996) AWG 80Beneﬁts › Complete set for safety concept of indoor ground source heat pumps with natural refrigerant (R290) › DN 80 ﬂexible aluminium pipe set including gasketsDescription • Accessory set consisting of DN 80 wall outlet for external walls up to 550 mm wall thickness including weather grille, rodent guard, check valve and two 5 m DN 80 aluminium ﬂexible pipes. • Ideal for extract air routing for ground source heat pumps with natural refrigerant and power of less than 20 kW.AWG 80 AWG 80 NEWPart number 207743Price excl. VAT £ 515.00

Page 134

Page 135

Page 136

Page 137

Page 138

Control units ControllerControl unitsController138Product information 2025 - Subject to technical modiﬁcations.WPMBeneﬁts › Heat pump manager in stylish wall mounted enclosure › Management of a 2-stage on/off or inverter cascade for one direct heating circuit and two heating circuits with mixer › Straightforward electrical installation thanks to RAST 5 connector technology › Integral heat metering › Cooling control function › A second heat generator can be controlled › Screed drying program › DHW circulation pump management › PWM circulation pump management › 3 immersion/contact sensors and 1 outside sensor are included in the standard delivery › Fault output 230 V › Update via an SD card › An internet interface is available as an option › SG Ready (optional) › Smart home and energy management interfaces (optional)Description • This WPM heat pump manager is the main controller in the system. One direct heating circuit and two heating circuits with mixer can be controlled via the integral programming unit. Two heat pumps can also be operated in a cascade. • In combination with the ISG Internet Service Gateway, the heat pump can be integrated into a home network or controlled from mobile devices. • Direct connection of high efﬁciency circulation pumps is possible via relay outputs or PWM outputs. • The WPM also provides a fault contact for external pick-up of system faults. • A drip-proof wall mounted enclosure with large installation area provides sufﬁcient space for the electrical connections and other components such as a top-hat rail relay. The well designed cable layout ensures easy connection.WPM WPM DISCONT.PRODUCTPart number 234727Price excl. VAT £ 587.00 Specification Protection class ISupply voltage V 230IP rating IP21Width mm 310Height mm 400Depth mm 100 Controller, 1 AF PT outside sensor, 3 TAFPT sensors (Product: 234727)

Page 139

Control unitsController139Product information 2025 - Subject to technical modiﬁcations.WPEBeneﬁts › Function extension module for the WPM heat pump manager › Data link via the system bus › Straightforward electrical installation thanks to RAST 5 connector technology › The sensor is adjusted and operated via the programming unit on the WPM heat pump manager › Management of 4 additional heat pump stages › Two additional heating circuits with mixer can also be controlled › Swimming pool management › Universal differential controller › 3 immersion/contact sensors are included in the standard deliveryApplication • This WPE heat pump extension adds numerous functions to the WPM heat pump manager. It offers two additional heating circuits with mixer, a swimming pool controller and cascade control for up to six heat pumps. Two additional 0-10 V interfaces, a differential controller and switching outputs are also available. • The enclosure is installed to the right or left of the WPM and is connected to the power supply via the bus. • The module‘s additional functions can be set at the programming unit of the WPM.WPE WPEPart number 234725Price excl. VAT £ 875.00 Specification Protection class ISupply voltage V 230IP rating IP21Width mm 310Height mm 400Depth mm 100 Required accessories Part number 234727Type WPMDescription Heat pump manager in wall mounted enclosurePrice excl. VAT £ 587.00 Controller, 3 TAF PT sensors (Product: 234725)

Page 140

Control units ConnectivityControl unitsConnectivity140Product information 2025 - Subject to technical modiﬁcations.ISG webBeneﬁts › Browser-based operation of the heat pump in a home network › Can be integrated into home automation systems through Modbus TCP/IP software interface ﬁtted as standard › Forecast-based on-site PV self-consumption facilitated by optional EMI software extension › Optional automation with KNX IP software extensionDescription • The ISG Internet Service Gateway connects the heat pump to the home network and enables the appliance to be operated using a browser. • Once enabled, appliance data is transferred to the Stiebel Eltron Internet Service Portal. • The ISG plus is a required accessory for use of the SG Ready functions of the WPM heat pump manager. The ISG can be integrated into an existing building management system via the Modbus TCP/IP data interface.ISG web ISG webPart number 229336Price excl. VAT £ 889.00 Specification Version Wall mounting10/100 Ethernet RJ45CAN RJ45RS232 RJ12Width mm 158Height mm 95Depth mm 37Min./max. application range °C 0 / 60 Service Part number 298662Type Integration of ISG/SG readyDescription Integration of the Internet Service GatewayPrice excl. VAT £ Observe the compatibility list.

Page 141

Control units Controller accessoriesControl unitsController accessories141Product information 2025 - Subject to technical modiﬁcations.FETBeneﬁts › Data link via the system bus › Room remote control with thermostatic function for the WPM heat pump manager › Can be used for each of the 5 heating circuits in the WPM system › Illuminated graphic display › Display of time, room temperature and room humidity, along with outside temperature › Touch-Wheel operation › Room temperature and humidity measurement › Simple adjustment of comfort temperature › Energy savings with selectable eco function › Activating a DHW charging processDescription • The FET digital remote control can be used to conveniently control a heating zone. • The remote control measures the relative humidity and room temperature.FET FETPart number 234723Price excl. VAT £ 253.00 Specification Width mm 145Height mm 96Depth mm 31 TAF PTDescription • The PT 1000 sensor is used in heat pump systems as an immersion or contact sensor.TAF PT 2m TAF PT 2mPart number 235996Price excl. VAT £ 31.00 Specification Version Temperature sensorWith supply line •Colour whiteDiameter mm 6 (Product: 235996)

Page 142

Control units Energy managementControl unitsEnergy management142Product information 2025 - Subject to technical modiﬁcations.EM MeterEM TrendBeneﬁts › Records data on power exported to and drawn from the grid in real time › 3-phase measurement › Ethernet connection with switch function › Connected electrical load up to 63A › Installation on the top-hat rail (4 HP)Description • In combination with the EM Trend energy management software, the EM meter optimises usage of electricity from a photovoltaic system to run a heat pump. • The EM meter measures the electrical feed-in power or mains reference power at the mains connection to a building in real time. The data is transmitted via the Ethernet and the home network to EM Trend. • The installation requires four horizontal pitches on the top-hat rail in the distributor box. • The current carrying capacity is 63 A.Beneﬁts › Optimised use of solar power to run the inverter heat pump › Permanently lower heating and hot water costs due to inexpensive solar power › Can be combined with any photovoltaic system › Straightforward operationDescription • Make your heat pump even smarter. You can do so easily with this energy management solution. The extension module for your Internet Service Gateway uses a compatible electricity meter to measure the electrical feed-in or reference power at the connection to the building. Surplus energy can then be stored in your buffer and DHW cylinder and in the building itself by raising the temperatures.EM Meter EM Meter NEWPart number 201675Price excl. VAT £ 454.00 1 x EM meter1 x label 2.type plate1 x operating instructions2 x RS 485 plugsObserve the compatibility list.Please enquire about availability. EM Trend NEWPart number 337397Description EM Trend software extensionPrice excl. VAT £ 75.00

Page 143

Control units Individual room controlControl unitsIndividual room control143Product information 2025 - Subject to technical modiﬁcations.EZEBeneﬁts › Central base station for the EASYTRON Connect individual room control system › Preferred temperature adjustable in each room › Economy functions such as holiday and time programs › Wireless connection between all components of the individual room control system and the central base station via the Z-Wave communication protocol › Can be operated from anywhere at any time via the free app › In some cases, may eliminate the need to include a buffer cylinder in the system designDescription • This base station is the central connection point for EASYTRON Connect individual room control. An EASYTRON Connect individual room control system measures the room temperature and adjusts the temperature in each living space to the preferred temperature.Convenience features • Additional EASYTRON components suited to the application can be connected to the base station. Smart thermostats are available for connection to radiators, wireless sensors for measuring room tem-perature and heating controllers for controlling actuators in underﬂoor heating systems. • Individual components communicate with each other by Z-wave radio. To improve wireless coverage, repeaters can be interposed. An app (iOS® and Android®) is used to operate the system. • Until now, the individual room control systems on the market have offered little opportunity to directly inﬂuence the heat generator, e.g. a heat pump. The EASYTRON individual room control system responds optimally to different operating conditions, such as defrosting. An EASYTRON Connect individual room control system is therefore the ideal supplement to the heat pump control unit. • It can be used both for water-based underﬂoor heating and radiators, and signiﬁcantly increases comfort and convenience.EZE EZEPart number 237737Price excl. VAT £ 225.00 Specification Installation type Floor mounted applianceUSB 210/100 Ethernet RJ45WLAN 802.11 b/g/nZ-Wave radio MHz 868.42Power supply, power supply unit 1/N ~ 230 V 50 HzSupply voltage V 5Power consumption W 5Operating temperature range °C 0...+50Colour whiteWidth mm 124Height mm 124Depth mm 28Weight kg 0.17Storage and transportation temperature°C -20...+60 The end customer connection (or that of the Internet Service Provider) must support all standard network technologies (in particular a public IP v4 address). Observe the compatibility list.

Page 144

Control unitsEnergy management144Product information 2025 - Subject to technical modiﬁcations.EZE CNS ConnectBeneﬁts › In some cases, may eliminate the need to include a buffer cylinder in the system design › Wireless connection between all components of the individual room control system and the central base station via the Z-Wave communication protocol › Economy functions such as holiday and time programs › Can be operated from anywhere at any time via the free app › Preferred temperature adjustable in each room › Central base station for the EASYTRON Connect individual room control systemDescription • This base station is the central connection point for EASYTRON CNS Connect individual room control. An EASYTRON CNS Connect individual room control system measures the room temperature and adjusts the temperature in each living space to the preferred temperature.Convenience features • Additional EASYTRON components suited to the application can be connected to the base station. Smart convectors for room heating and wireless sensors for capturing the room temperature are available. • Individual components communicate with each other by Z-wave radio. To improve wireless coverage, repeaters can be interposed. An app (iOS® and Android®) is used to operate the system.EZE CNS Connect EZE CNS Connect NEWPart number 207642Price excl. VAT £ 249.00 Specification Installation type Floor mounted applianceUSB 210/100 Ethernet RJ45WLAN 802.11 b/g/nZ-Wave radio MHz 868.42Power supply, power supply unit 1/N ~ 230 V 50 HzSupply voltage V 5Power consumption W 5Operating temperature range °C 0...+50Colour whiteWidth mm 124Height mm 124Depth mm 28Weight kg 0.17Storage and transportation temperature°C -20...+60 The end customer connection (or that of the Internet Service Provider) must support all standard network technologies (in particular a public IP v4 address). Observe the compatibility list.

Page 145

Control unitsEnergy management145Product information 2025 - Subject to technical modiﬁcations.ESSBeneﬁts › EASYTRON Connect starter pack for systems with underﬂoor heating: contains components for up to 3 roomsDescription • The compact starter set of the EASYTRON individual room control contains the necessary components for individual room control in heating systems with underﬂoor heating in three rooms. • The standard delivery includes the base station, the heating controller and three room temperature sensors.ESS ESSPart number 237739Price excl. VAT £ 661.00 The end customer connection (or that of the Internet Service Provider) must support all standard network technologies (in particular a public IP v4 address). Observe the compatibility list.EHFBeneﬁts › Wireless controller for underﬂoor heating › Connection for thermoelectric actuators, 230 V NC (up to 8 channels) › External aerial for optimum wireless connectionDescription • The heating controller can be used to connect the heating circuits of an underﬂoor heating system to the EASYTRON individual room control. • A maximum of 8 channels with up to 3 thermoelectric actuators each can be controlled. This means that up to 24 thermoelectric actuators (not included in the standard delivery) can be connected. • The controller can be ﬁtted either to a top-hat rail available on site or to the top-hat rail provided.EHF EHFPart number 237736Price excl. VAT £ 284.00 Specification Installation type DIN railZ-Wave radio MHz 868.42Max. relay output breaking capacityA 1 AProtection class II (bei Montage in einem Unterverteiler)IP rating IP00Width mm 160Height mm 91Depth mm 58 Required accessories Part number 237737Type EZEDescription EASYTRON Connect base stationPrice excl. VAT £ 225.00

Page 146

Control unitsEnergy management146Product information 2025 - Subject to technical modiﬁcations.EFSDescription • This thermoelectric actuator opens and closes valves on heating circuit distributors of area heating systems. • Actuated via a room temperature controller. The integral function display signals adjustments. • The ready-to-use actuator is designed to be plugged into the heating circuit distributor.EFS EFSPart number 237740Price excl. VAT £ 28.00 Standard delivery includes the VA10 and VA80 valve adaptors. ERTBeneﬁts › Battery powered room temperature sensor › Connected to EASYTRON Connect base station via Z-Wave wireless protocol › Power from two standard AAA batteriesDescription • The room temperature sensor of the EASYTRON individual room control system measures the tem-perature in a living space. • The battery-operated sensor is connected wirelessly to the base station. It is suitable for wall mounting.ERT ERTPart number 237738Price excl. VAT £ 65.00 Specification Installation type Surface-mountedOperating temperature range °C -10...+50Z-Wave radio MHz 868.42Power supply Batteries 2*1.5 V AAAColour whiteWidth mm 79Height mm 79Depth mm 18Weight kg 0.075Storage and transportation temperature°C -20...+60 Required accessories Part number 237737Type EZEDescription EASYTRON Connect base stationPrice excl. VAT £ 225.00

Page 147

Control unitsEnergy management147Product information 2025 - Subject to technical modiﬁcations.ERSBeneﬁts › Battery powered smart thermostat for controlling radiators › Integral sensor for measuring the room temperature › Integral window-open detection › Quiet motor › Connected to EASYTRON Connect base station via Z-Wave wireless protocol › Compatible with M30 x 1.5 and Danfoss RA valvesDescription • The smart thermostat of the EASYTRON individual room control system is used to control radiators. The room temperature is measured by the integral sensor and the low-noise motor provides room temperature control. • The thermostat can be connected to the EASYTRON base station using the Z-wave wireless protocol. It is compatible with standard M30 x 1.5 and Danfoss RA radiator valves.ERS ERSPart number 237741Price excl. VAT £ 114.00 Specification Z-Wave radio MHz 868.42Control signal LinearSpindle movement 2-3 mm at valve (1 mm/s)Maximum displacement mm 4.50Max. heating flow temperature °C 90Mechanical load breaking capacityN 70Power supply Batteries 2*1.5 V AAColour whiteDiameter mm 51Length m 0,091Weight kg 0.195Operating temperature range °C 0...+40Storage and transportation temperature°C -20...+60 Required accessories Part number 237737Type EZEDescription EASYTRON Connect base stationPrice excl. VAT £ 225.00

Page 148

Control unitsEnergy management148Product information 2025 - Subject to technical modiﬁcations.ERE UKBeneﬁts › Repeater to boost the Z-Wave wireless signal › Plug & play › For straightforward electrical connection to any standard safety socketDescription • The repeater is an accessory for the EASYTRON individual room control. • To improve wireless coverage, the Z-wave wireless signal is forwarded. • The repeater is simply plugged into a 230 V standard safety socket.ERE UK ERE UK NEWPart number 207643Price excl. VAT £ 110.00 EILBeneﬁts › Tool for hardwired commissioning of the EASYTRON system › Adaptor for LAN to USB › Allows access to the EASYTRON Connect base station without requiring access to the customer networkDescription • This tool is used for hardwired commissioning of the individual room control system. • It functions as an adaptor from RJ45 to USB and enables separate access to the base station without needing to access the customer network.EIL EILPart number 237744Price excl. VAT £ 55.00 Specification USB 210/100 Ethernet RJ45Operating temperature range °C 0...+50Colour whiteWidth mm 22Height mm 65Depth mm 16Weight kg 0.02Storage and transportation temperature°C -20...+60

Page 149

next page >Control unitsEnergy management149Product information 2025 - Subject to technical modiﬁcations.EIWBeneﬁts › Tool for wireless commissioning of the EASYTRON system › WLAN USB stick › Allows access to the EASYTRON Connect base station without requiring access to the customer networkDescription • This WLAN commissioning stick is used for wireless commissioning of the EASYTRON individual room control system via WLAN. The stick is connected to the USB interface of the base station. It enables separate access to the base station via a WLAN hotspot. This enables the system to be conﬁgured without having to access the network or router.EIW EIWPart number 237745Price excl. VAT £ 75.00 Specification USB 2WLAN 802.11 b/g/nOperating temperature range °C 0...+50Colour whiteWidth mm 20Height mm 6Depth mm 60Weight kg 0.02Storage and transportation temperature°C -20...+60 EADBeneﬁts › Adaptor set for radiators › Suitable for RAVL and RAVDescription • EASYTRON Connect adaptor set for radiators with RAV or RAVL heating valves.EAD EADPart number 237742Price excl. VAT £ 22.00 Specification Adaptor for valve RAV and RAVLColour white

Page 150

Page 151

Page 152

Page 153

Page 154

Integral cylinder With integral buffer cylinderIntegral cylinderWith integral buffer cylinder154Product information 2025 - Subject to technical modiﬁcations.HSBC 300 cool (GB) SetBeneﬁts › Space saving positioning thanks to integration of DHW cylinder, buffer cylinder and hydraulic working parts into a single appliance › Large area heat exchanger for high DHW demand › The integral cylinder for DHW heating is combined with a heating heat pump and integrated into the heating system. › Can be used for cooling via area heating system or fan coil units (condensation resistance) › Installation requires little effort thanks to high level of integration including WPM heat pump managerApplication • This integral cylinder is suitable for DHW heating in heat pump mode. It can be simultaneously integrated into heating systems for the hydraulic connection and is used for delivery to/separation between the heat pump and heating circuit. • Designed for heating and cooling in family houses.Convenience features • DHW cylinder comprising an enamelled steel cylinder with directly applied foam insulation, an internal indirect coil and a magnesium signal anode for additional corrosion protection. The buffer cylinder is a steel cylinder with directly applied foam insulation. • The heat pump manager, cylinder charging pump, heating circuit pump and 3/2-way diverter valve are included. Prepared for optional extension with a heating circuit with mixer.Installation • The cylinders are arranged one above the other, can be separated from each other for easier installation and are equipped with recessed grips.Efﬁciency • Low standby losses because both the cylinder volume and the indirect coil surface area are matched to the application.HSBC 300 cool (GB) Set HSBC 300 cool (GB) SetPart number 204651Price excl. VAT £ 5,743.00 Specification Energy efficiency class BNominal capacity, DHW cyl-inderl 270Nominal capacity, buffer cyl-inderl 100Surface area, heat exchanger m² 3.20Capacity, heat exchanger l 21Standby energy consump-tion/24 h at 65 °CkWh 1.50Height mm 1918Width mm 680Depth mm 910Height when tilted mm 2123Weight kg 250 Recommended accessories Part number 238825Type HSBC 3-HKMDescription Mixer circuit pump assemblyPrice excl. VAT £ 605.00

Page 155

Integral cylinderWith integral buffer cylinder155Product information 2025 - Subject to technical modiﬁcations.HSBC 200 S (GB) SetBeneﬁts › The integral cylinder for DHW heating is combined with a heating heat pump and integrated into the heating system. › Space saving positioning thanks to integration of DHW cylinder, buffer cylinder and hydraulic working parts into a single appliance › Installation requires little effort thanks to high level of integration including WPM heat pump manager › Large area heat exchanger for high DHW demand › Additional application due to suitability for cooling, e.g. via an area heating systemApplication • This integral cylinder is suitable for DHW heating in heat pump mode. It can be simultaneously integrated into heating systems for the hydraulic connection and is used for delivery to/separation between the heat pump and heating circuit. • Designed for heating and cooling in family houses.Convenience features • The DHW cylinder comprises an enamelled steel cylinder with directly applied foam insulation, an internal indirect coil and a magnesium signal anode for additional corrosion protection. • The buffer cylinder consists of a steel cylinder with directly applied foam insulation. • The integral cylinder is equipped with the following components: heat pump manager, cylinder charging pump, circulation pump, 3/2-way diverter valve, safety valve with drain routed out of the rear of the appliance, T&P valve and electric emergency/auxiliary heater. • The appliance is prepared for optional extension with a heating circuit with mixer. • The cylinder casing consists of a plastic jacket, permanently attached at the back and sides. The front is made of sheet metal with a design cover.Installation • The two cylinders are arranged one above the other, can be separated from each other for easier installation and are equipped with recessed grips.Efﬁciency • Low standby losses because both the cylinder volume and the indirect coil surface area are matched to the application.HSBC 200 S (GB) Set HSBC 200 S (GB) SetPart number 236917Price excl. VAT £ 3,723.00 Specification Energy efficiency class BNominal capacity, DHW cyl-inderl 168Nominal capacity, buffer cyl-inderl 100Surface area, heat exchanger m² 3.30Capacity, heat exchanger l 20.5Standby energy consump-tion/24 h at 65 °CkWh 1.30Height mm 1908Width mm 680Depth mm 871Height when tilted mm 2107Weight kg 203 Recommended accessories Part number 234648Type HSBC-HKMDescription Mixer circuit pump assemblyPrice excl. VAT £ 612.00

Page 156

Integral cylinderWith integral buffer cylinder156Product information 2025 - Subject to technical modiﬁcations.HSBC 225 S 1Beneﬁts › Space saving positioning thanks to integration of DHW cylinder, buffer cylinder and hydraulic working parts into a single appliance › Suitable for high DHW demand thanks to large-area heat exchanger › The integral cylinder for DHW heating is combined with a heating heat pump and integrated into the heating system. › Installation requires little effort thanks to high level of integration including WPM heat pump manager › HSBC225S1 is sold as part of a package with heat pump models WPL-A07HKPremium or WPL25ACS.Application • This integral cylinder is suitable for DHW heating in heat pump operation and at the same time can be integrated into heating systems to form the hydraulic connection. It is used for delivery to/separation between the heat pump and heating circuit. • Designed for heating in family houses.Convenience features • The integral cylinder consists of a stainless steel cylinder with directly applied foam insulation and an internal indirect coil. The buffer cylinder is integrated. All components for the hydraulic connection are also in-cluded. • The heat pump manager, cylinder charging pump, circulation pump and 3/2-way diverter valve are included.Installation • Thanks to its compact, highly integrated design, the integral cylinder takes up very little space within the building. Stainless steel cylinder for easy transportation to the installation site.Efﬁciency • Low standby losses because both the cylinder volume and the indirect coil surface area are matched to the application.HSBC 225 S 1 HSBC 225 S 1Part number 206045Price excl. VAT £ 3,723.00 Specification Energy efficiency class ANominal capacity, buffer cyl-inderl 65Surface area, heat exchanger m² 3.10Standby energy consump-tion/24 h at 65 °CkWh 1.82Height mm 1776Width mm 765Depth mm 685Height when tilted mm 1870Weight kg 79.5

Page 157

Integral cylinderWith integral buffer cylinder157Product information 2025 - Subject to technical modiﬁcations.HSBC 220 SBeneﬁts › The integral cylinder for DHW heating is combined with a heating heat pump and integrated into the heating system. › Space saving positioning thanks to integration of DHW cylinder, buffer cylinder and hydraulic working parts into a single appliance › Suitable for high DHW demand thanks to large-area heat exchanger › Simple operation through integrated heat pump managerApplication • This integral cylinder is suitable for DHW heating in heat pump mode. It can be used to heat a fam-ily house (new or existing building). • The unit is prepared for the optional connection of another heating circuit. • The appliance simpliﬁes hydraulic connection in heating systems, as the heat pump and heating circuit ﬂows are separated by means of an integral buffer cylinder. This means that the integral cylinder can be used in various heat distribution systems.Convenience features • The DHW cylinder and buffer cylinder are stainless steel cylinders with directly applied foam insulation. The DHW cylinder has an internal indirect coil. • The two cylinders are mounted one above the other to save space. The heat pump manager, cylinder charging pump, circulation pump and 3/2-way diverter valve are included in the standard delivery. • Easy handling.Efﬁciency: • Standby losses are low, because the cylinder volume and indirect coil surface area are matched to the demand.HSBC 220 HSBC 220Part number 206641Price excl. VAT £ 3,900.00 Specification Energy efficiency class BNominal capacity, DHW cyl-inderl 200Nominal capacity, buffer cyl-inderl 85Surface area, heat exchanger m² 2.60Capacity, heat exchanger l 2Standby energy consump-tion/24 h at 65 °CkWh 1.20Height mm 1765Width mm 735Depth mm 690Height when tilted mm 1851

Page 158

Page 159

Page 160

Accessories for integral cylinders AccessoriesAccessories for integral cylindersAccessories160Product information 2025 - Subject to technical modiﬁcations.HSBC (3)-HKMBeneﬁts › Pump assembly for an additional heating circuit with mixer › Heating circuit connection: 22mm › Integral cylinder accessoriesDescription • The pump assembly mixer circuit adds a heating circuit with mixer to the integral cylinder. • The as-sembly comprises the insulated connection pipework, heating circuit pump and 3-way mixer with servomotor. It is intended for use inside the integral cylinder using the prepared connections.HSBC-HKM HSBC-HKM HSBC 3-HKMPart number 234648 238825Price excl. VAT £ 612.00 605.00 Specification Connection, heating circuit mm 22 22 RBS-SBCBeneﬁts › Complete pipe assembly for quick installation › Simple routing of the DHW connections › Low energy losses thanks to high grade insulationDescription • With the insulated pipe assembly, the connections on the DHW side of integral cylinders are routed upwards behind the unit. From there, the hydraulic connections are made to the copper connectors. • The individual, preassembled connection lines are aligned by a mounting rail to be ﬁtted on the integral cylinder.RBS-SBC RBS-SBCPart number 238827Price excl. VAT £ 284.00

Page 161

Accessories for integral cylindersAccessories161Product information 2025 - Subject to technical modiﬁcations.CDTBeneﬁts › Condensate pan with condensate pump for installation in the integral cylinder › Used for seasonal cooling below the dew point or for cooling without dew point monitoringDescription • The condensate pan with condensate pump is installed in an integral cylinder. • It needs to be used for seasonal cooling below the dew point temperature or if, for example, fan coil units provide cooling without dew point monitoring. • Without this accessory, cooling rooms is only permissible with dew point temperature monitoring. • Standard delivery includes the condensate pan with condensate pump, hose for external drainage, wiring harness for the electrical connection and installation accessories.CDT 180 CDT 180Part number 204642Price excl. VAT £ 296.00

Page 162

Page 163

Page 164

DHW cylinder DHW cylinderDHW cylinderDHW cylinder164Product information 2025 - Subject to technical modiﬁcations.SBB 301-501 WP SOL (GB) SetBeneﬁts › DHW cylinders for use in combination with heating heat pumps › Large mixed water amount due to matched inlet and outlet ﬂow technology › Large area heat exchanger for high DHW demand › Installation-friendly ﬁttings including signal anode and ﬂexible, multi-directional cold water connection › Additional application range thanks to integral solar indirect coil (type-dependent) › Additional application range thanks to integral solar indirect coil (Product: 228946, 228947)Application • This DHW cylinder is suitable for heat pump operation in family houses as well as apartment buildings, depending on the capacity and the indirect coil surface area.Convenience features • The enamelled steel cylinder with directly applied foam insulation is equipped with an in-spection ﬂange, T&P valve and a protective anode for additional corrosion protection. • An internal indirect coil for connecting the heat pump is integrated • A plug-in dial thermometer is included in the standard delivery. • The cylinder casing consists of a plastic outer jacket and a cylinder cover. Both can be removed during installation if required.SBB 302 WP (GB) Set SBB 302 WP (GB) Set SBB 401 WP SOL (GB) Set SBB 501 WP SOL (GB) SetPart number 228945 228946 228947Price excl. VAT £ 2,506.00 2,777.00 3,046.00 Specification Energy efficiency class C C CNominal capacity l 290 391 493Surface area, heat exchanger, topm² 4.80 4.00 5.00Surface area, heat exchanger, bottomm² 1.40 1.40Height mm 1770 1940 2044Diameter mm 700 750 810Height when tilted mm 1750 1930 2030Weight, empty kg 184 219 260 Recommended accessories Part number 232628 232628Type WRV 32 WRV 32Description Corrugated pipe connector for indirect coilsCorrugated pipe connector for indirect coilsPrice excl. VAT £ 151.00 151.00 The max. recommended collector aperture area relates to STIEBEL ELTRON ﬂat-plate collectors. (Product: 228946, 228947)

Page 165

DHW cylinderDHW cylinder165Product information 2025 - Subject to technical modiﬁcations.SBB 300-500-1 Plus (GB)Beneﬁts › DHW cylinders for use in combination with heating heat pumps › Low standby losses and matched inlet and outlet technology for efﬁcient operation › The surface areas of the heat exchanger are tailored to the output ranges of the recommended heat pumpsApplication • This DHW cylinder is suitable for heat pump operation in family houses as well as apartment buildings, depending on the capacity and the indirect coil surface area.Convenience features • The enamelled steel cylinder, with foam insulation applied directly in the plastic jacket, is equipped with a protective anode for additional corrosion protection. • The appliance has an inspection ﬂange and a connector for an electric threaded immersion heater. • The heat pump is connected via an internal indirect coil. • A plug-in dial thermometer is included in the standard delivery. • The cylinder casing consists of a permanently attached plastic jacket and a cylinder cover.Efﬁciency • Low standby losses and matched inlet and outlet technology ensure efﬁcient operation.SBB 300-1 Plus GB SBB 300-1 Plus GB SBB 400-1 Plus GB SBB 500-1 Plus GBPart number 202923 202924 202925Price excl. VAT £ 1,489.00 1,557.00 1,919.00 Specification Energy efficiency class B B BNominal capacity l 326 418 522Surface area, heat exchanger, topm² 2.00 2.60 3.20Height mm 1619 1799 1904Diameter mm 650 730 780Height when tilted mm 1750 1946 2063Weight, empty kg 111 139 182 SBB 300 TrendBeneﬁts › Excellent thermal properties › DHW cylinder for use with heating heat pumps › Factory-ﬁtted electric ﬂanged immersion heater with thermal cut-out › Two holders for immersion sensorsApplication • Versatile and lightweight DHW cylinder easy to combine with our heat pumps. Suitable for air and ground source heat pumps. The stainless steel tank makes the cylinder suitable for a wide range of installation applications.SBB 300 Trend SBB 300 Trend NEWPart number 206187Price excl. VAT £ 1,683.00 Specification Energy efficiency class BHeight when tilted mm 1849

Page 166

Page 167

Page 168

Page 169

Page 170

Instantaneous water cylinder Instantaneous water cylinderInstantaneous water cylinderInstantaneous water cylinder170Product information 2025 - Subject to technical modiﬁcations.SBS 601-1501 W (GB) SetBeneﬁts › Efﬁcient operation through inlet device for demand-dependent, zoned charging › Highly versatile, as it can be combined with various heat generators › Space saving combination of heating buffer cylinder and DHW heating in a single unit › Hygienic DHW heating through instantaneous water heater principleApplication • This combination instantaneous water cylinder makes DHW available. The appliance can be used simul-taneously as a buffer cylinder for hydraulic separation between the heat pump and heating circuit, and is also suitable for storing heating energy. • The instantaneous water cylinder is suitable for family houses. If several appliances are hydraulically interconnected, they can be used in apartment buildings.Convenience features • The steel cylinder is equipped with an integral corrugated pipe indirect coil made of stainless steel. The appliance provides DHW instantaneously. • The connectors facing the front allow system-speciﬁc hydraulic connections. • An additional electric threaded immersion heater can be installed via the inspection port if required.Efﬁciency • Low standby losses if the thermal insulation available as an accessory is used. • Matched inlet and out-let technology with integral PRO temp-Flow inlets ensures good temperature stratiﬁcation. This reduces the ﬂow turbulence considerably.SBS 601 W Set SBS 601 W Set SBS 801 W Set SBS 1001 W Set SBS 1501 W SetPart number 236481 236482 236483 236484Price excl. VAT £ 3,046.00 3,452.00 3,858.00 4,872.00 Specification Nominal capacity l 613 759 941 1430Area of DHW cylinder heat exchangerm² 6.00 6.50 8.70 10.00Height incl. thermal insulation mm 1,775 1,940 2,350 2,265Diameter incl. thermal insu-lationmm 970 1,010 1,010 1,220Height when tilted mm 1,840 1,880 2,285 2,225Weight kg 135 150 175 236 The max. recommended collector aperture area relates to STIEBEL ELTRON ﬂat-plate collectors.

Page 171

Page 172

Accessories for instantaneous water cylindersAccessoriesAccessories for instantaneous water cylindersAccessories172Product information 2025 - Subject to technical modiﬁcations.WDH 601-1501 SBSBeneﬁts › Graphite inserts for good insulation properties › Two insulation semi-shells to make it easier to match the shape › Composite thermal insulation made from rigid foam and ﬂeeceDescription • The high grade thermal insulation made from EPS rigid foam is supplied with insulated cover and ﬂoor disc. Graphite inserts in the EPS and the ﬂeece ensure minimal heat losses. • The thermal insulation can be optimally adapted to the cylinder thanks to the wedge-shaped cut-outs and the ﬂeece layer. The prepared adhesive joints in the wedge-shaped cut-outs also contribute to this. • The integrated quick-release hook strip makes it easier to attach the thermal insulation.WDH 601 SBS WDH 601 SBS WDH 801 SBS WDH 1001 SBS WDH 1501 SBSPart number 231925 231926 231927 231928Price excl. VAT £ 725.00 752.00 870.00 986.00 Specification Insulation for SBS 601 W, W SOL SBS 801 W, W SOL SBS 1001 W, W SOL SBS 1501 W, W SOLThermal insulation thickness mm 110 110 110 110Standby energy consump-tion/24 h at 65 °CkWh 2.60 2.90 3.50 4.10 UBS-VL RLBeneﬁts › Complete pipe assembly for quick installation › Incl. diverter valve for stratiﬁed charging › Thermally insulated pipesDescription • Insulated pipe assembly with diverter valve. Straightforward connection of instantaneous water heaters for stratiﬁed charging. Not suitable for 1501! • The pipe sections for ﬂow and return are included and can be cut to length depending on type of cylinder. • The assembly is installed upstream of the cylinder using union nuts. Any orientation of the heat pump connection at the side is possible.UBS-RL UBS-RL UBS-VLPart number 238490 238489Price excl. VAT £ 490.00 484.00 Specification Connection, heat pump mm 42 42

Page 173

Page 174

next page >Buffer cylinder Buffer cylinderBuffer cylinderBuffer cylinder174Product information 2025 - Subject to technical modiﬁcations.SBP 100 classicBeneﬁts › Suitable for heating and cooling operation as the impermeable complete foam insulation on the buffer cylinder makes it suitable for cooling › Particularly space saving for use in family homes › Floorstanding buffer cylinder for integration into the heating systemApplication • This buffer cylinder provides hydraulic separation between the heat pump and heating/cooling circuit.Convenience features • The steel cylinder with directly applied foam insulation is equipped with a protective cover and connections at the top for ventilation and draining.Efﬁciency • Reduced mixing due to matched inlet and outlet technology.SBP 100 classic SBP 100 classic NEWPart number 235200Price excl. VAT £ 536.00 Specification Energy efficiency class CNominal capacity l 100Standby energy consump-tion/24 h at 65 °CkWh 1.20Height mm 877Diameter mm 510Height when tilted mm 968Weight kg 21 STH 210-415 C PlusBeneﬁts › Connector for an electric threaded immersion heater in both the upper and lower third › More efﬁcient operation with inverter heat pumps › Suitable for both heating and cooling modes › Prepared for self-consumption of electricity from photovoltaic systems › New appealing designApplication • This round, ﬂoorstanding buffer cylinder with its attractive design is suitable for heat pump heating systems in family houses. • It stores heat for heating operation but can also be used for cooling operation.Convenience features • The steel cylinder with directly applied foam insulation has hydraulic connectors arranged at the front one above the other. • The buffer cylinder ensures hydraulic separation between the primary and secondary circuits. It is designed for the connection of a heat pump with high ﬂow rates in the primary circuit. • In the upper section, there is a connector for the installation of an electric threaded immersion heater for electric reheating. In the lower section, there is another connector for an electric threaded immersion heater for charging the buffer cylinder. This can be used to increase self-consumption of electricity from a photovoltaic system, for example.Efﬁciency • Low standby losses. • Prepared for self-consumption from a solar PV system.STH 210 C Plus STH 210 C Plus STH 415 C PlusPart number 205369 205370Price excl. VAT £ 930.00 1,126.00

Page 175

Buffer cylinderBuffer cylinder175Product information 2025 - Subject to technical modiﬁcations. STH 210 C Plus STH 415 C PlusSpecification Energy efficiency class B BNominal capacity l 207 415Standby energy consump-tion/24 h at 65 °CkWh 1.163 1.719Height mm 1510 1700Height when tilted mm 1637 1867 Recommended accessories Part number 003711 003711Type ET SBP ET SBPDescription Inserts InsertsPrice excl. VAT £ 71.00 71.00 STH 210-720-1 PlusBeneﬁts › Easy to transport at the installation site as the casing can be removed if necessary › Suitable for cooling due to complete thermal foam insulation of the cylinder › Efﬁcient thermal insulation allows use in heating and cooling modes › Low standby losses for efﬁcient operation › Buffer cylinder for heat pump heating systemsApplication • These buffer cylinders are suitable for heat pump heating systems and can also be used in cooling mode. • Provides hydraulic separation between the heat pump and the heating/cooling circuit, extends heat pump runtimes and stores heating energy. • Suitable for use in family houses, depending on nominal capacity. • A threaded immersion heater can be used to increase the PV self-consumption rate. The STH 720-1 Plus appliance can also be combined with a solar thermal system.Convenience features • The steel cylinder with directly applied foam insulation has hydraulic connectors arranged at the front, one above the other. Connectors are also provided for electric threaded immersion heaters if required. • The cylinder casing consists of the plastic outer jacket, the cylinder cover and a plinth trim.Efﬁciency • Low standby losses. • The buffer cylinders are designed for connecting heat pumps with high ﬂow rates on the primary side.STH 720 Plus STH 720 Plus STH 720-1 PlusPart number 203765 203766Price excl. VAT £ 1,821.00 2,026.00 Specification Nominal capacity l 720 703Surface area, heat exchanger, bottomm² 2Standby energy consump-tion/24 h at 65 °CkWh 2.20 2.20Height mm 1890 1890Diameter incl. thermal insu-lationmm 910 910Height when tilted mm 2000 2000Weight kg 185 216 Recommended accessories Part number 003711 003711Type ET SBP ET SBPDescription Inserts InsertsPrice excl. VAT £ 71.00 71.00 Availability on request

Page 176

Buffer cylinderBuffer cylinder176Product information 2025 - Subject to technical modiﬁcations.SBP 1000-1500 E SOLBeneﬁts › Buffer cylinder for heating systems with large heat pumps › Highly versatile, as it can be combined with various heat generators › The buffer cylinder is designed for high ﬂow rates with suitably sized ﬂanged connections › Additional application range thanks to integral solar indirect coil (Product: 227566)Application • This buffer cylinder is combined with heating heat pumps in a large scale system and is suitable for use in apartment buildings and commercially used buildings. The appliance enables hydraulic separation between the heat pump and heating circuit ﬂows, extends the operating time of the heat pump and stores heating energy.Convenience features • The steel cylinder has ﬂange connections arranged at the front, one above the other, for the primary and secondary circuit. There is also an additional connector for combination with further heat generators. An additional indirect coil or an electric ﬂanged immersion heater can also be ﬁtted as required for the speciﬁc system. For this purpose, a ﬂanged aperture sealed with a blank ﬂange has been integrated. The SOL types are, in addition, equipped with an internal smooth tube solar indirect coil.Efﬁciency • Low standby losses in conjunction with the high grade thermal insulation as an accessory. • The matched inlet and outlet technology is responsible for the good temperature stratiﬁcation. • The buffer cylinder is designed for connecting heat pumps with high ﬂow rates on the primary side.SBP 1000 E SBP 1000 E SBP 1000 E SOL SBP 1500 E SBP 1500 E SOLPart number 227564 227566 227565 227567Price excl. VAT £ 1,972.00 2,087.00 2,073.00 3,059.00 Specification Nominal capacity l 1006 979 1503 1473Surface area, heat exchanger, bottomm² 3.00 3.60Max. permissible pressure MPa 0.30 0.30 0.30 0.30Height incl. thermal insulation mm 2340 2340 2255 2255Diameter incl. thermal insu-lationmm 1010 1010 1220 1220Height when tilted mm 2335 2335 2250 2250Weight kg 172 219 229 285 Required accessories Part number 231929 231929 Type WDH 1000 SBP WDH 1000 SBP Description Thermal insulation Thermal insulation Price excl. VAT £ 781.00 781.00 Part number 231930 231930Type WDH 1500 SBP WDH 1500 SBPDescription Thermal insulation Thermal insulationPrice excl. VAT £ 896.00 896.00

Page 177

Page 178

next page >Accessories for buffer cylinders AccessoriesAccessories for buffer cylindersAccessories178Product information 2025 - Subject to technical modiﬁcations.WPKI 5Beneﬁts › All parts are included in the compact installation › Straightforward connection of a heating heat pump to a 200-700litre buffer cylinder › Only for heat pumps WITHOUT integral heating circuit pump › Including insulation assembly for ﬂow/return connector (Product: 205875) › For heating heat pumps without integral circulation pump (Product: 205875) › Integral non-return valve (Product: 205875)Application • This compact installation includes all the components needed for the hydraulic connection of the heat-ing heat pump to buffer cylinders with 200 to 700 litres. • The standard delivery includes: insulation, safety valve, thermometer/pressure gauge, shut-off valves, non-return valve and the option to connect a diaphragm expansion vessel, plus the DHW heating set. • The compact installation is only suitable for heating heat pumps without an integral heating circuit pump.WPKI 5-I WPKI 5-IPart number 205875Price excl. VAT £ 478.00 Specification Connection G 1 1/4Max. operating pressure MPa 0.30 Required accessories Part number 201620Type UP 25/7.5 PCVDescription Heating circuit pumpPrice excl. VAT £ 204.00 BBI 5Beneﬁts › Robust complete set for straightforward installation › With integral non-return valve › Only for heat pumps WITHOUT integral heating circuit pump › Integral non-return valve (Product: 205877)Description • The DHW heating kit is suitable for the compact installation of the buffer cylinder. • Contains all required components for the hydraulic connection of the heat pump to the DHW cylinder, including the insulation.BBI 5-I BBI 5-IPart number 205877Price excl. VAT £ 151.00 Specification Connection G 1 1/4 / Cu 28 x 1.5Max. operating pressure MPa 0.30

Page 179

Accessories for buffer cylindersAccessories179Product information 2025 - Subject to technical modiﬁcations. BBI 5-IRequired accessories Part number 201620Type UP 25/7.5 PCVDescription Heating circuit pumpPrice excl. VAT £ 204.00Part number 205875Type WPKI 5-IDescription WPKI 5 Compact installationPrice excl. VAT £ 478.00 WPKI 6Beneﬁts › For heat pumps WITH an integral heating circuit pump › Straightforward connection of a heating heat pump to a 200-700litre buffer cylinder › All parts are included in the compact installation › Including insulation assembly for ﬂow/return connector (Product: 205876) › For heating heat pumps with integral circulation pump (Product: 205876)Description • The compact installation is suitable for the hydraulic connection of the heating heat pump (with in-tegral heating circuit pump) to buffer cylinders with 200-700 l capacity. • All necessary components, including the insulation, are supplied.WPKI 6-I WPKI 6-IPart number 205876Price excl. VAT £ 280.00 Specification Connection G 1 1/4Max. operating pressure MPa 0.30 ET SBPBeneﬁts › SBP connection accessories › For a tight ﬁtting pipe connection without compact installation › Standard delivery: 4 inserts, 4 gaskets, 4 G4union nutsDescription • The adaptor ﬁttings with female threads are suitable for the hydraulic connection of buffer cylinders with 200-700 l capacity. • The ﬁttings are only required if a compact installation is not used.ET SBP ET SBPPart number 003711Price excl. VAT £ 71.00

Page 180

Accessories for buffer cylindersAccessories180Product information 2025 - Subject to technical modiﬁcations.WDH 1000-1500 SBPBeneﬁts › Composite thermal insulation made from rigid foam and ﬂeece › Graphite inserts for good insulation properties › Two insulation semi-shells to make it easier to match the shapeDescription • The high grade thermal insulation made from EPS rigid foam is supplied with insulated cover and ﬂoor disc. Graphite inserts in the EPS and the ﬂeece ensure minimal heat losses. • The thermal insulation can be optimally adapted to the cylinder thanks to the wedge-shaped cut-outs and the ﬂeece layer. The prepared adhesive joints in the wedge-shaped cut-outs also contribute to this. • The integrated quick-release hook strip makes it easier to attach the thermal insulation.WDH 1000 SBP WDH 1000 SBP WDH 1500 SBPPart number 231929 231930Price excl. VAT £ 781.00 896.00 Specification Insulation for SBP 1000 E and E SOL SBP 1500 E and E SOLThermal insulation thickness mm 110 110Standby energy consump-tion/24 h at 65 °CkWh 3.60 4.10

Page 181

Page 182

next page >Additional accessories Electric threaded immersion heaters and ﬂanged immersion heatersAdditional accessoriesElectric threaded immersion heaters and ﬂanged immersion heaters182Product information 2025 - Subject to technical modiﬁcations.BGCBeneﬁts › For matching to individual usage scenarios › High hot water convenience thanks to powerful heating elements › Variable temperature setting via rotary selectorApplication • This threaded immersion heater is suitable for sealed unvented heating systems and DHW heating systems. • The temperature can be variably adjusted; temperature limitation is possible. • The integral temperature controller is equipped with a high limit safety cut-out.BGC 6 kW 500 mm ET BGC 6 kW 500 mm ET BGC/45Part number 003769 075115Price excl. VAT £ 267.00 280.00 Specification Connected load ~ 230 V kW 2-5,7 2-5,7Connected load ~ 400 V kW 6 6Power supply 1/N/PE, 2/PE, 3/PE 1/N/PE, 2/PE, 3/PERated voltage V 230/400 230/400Frequency Hz 50/60 50/60Version Universal flange Universal flangeIP rating IP44 IP44Immersion depth mm 500 455 FCRBeneﬁts › Replaceable copper heating element › For matching to individual usage scenarios › High hot water convenience thanks to powerful heating elements › Variable temperature setting via rotary selectorDescription • The ﬂanged immersion heaters are suitable for horizontal installation in unvented DHW cylinders with ﬂange connectors to DIN 4805. • The temperature can be variably adjusted. It is possible to limit the temperature. • Please note the details supplied by the cylinder manufacturer, as well as DIN 4753 and DIN 4751.FCR 21/60 FCR 21/60 FCR 21/120 E FCR 28/120 E FCR 28/180 EPart number 071330 071331 000694 000695Price excl. VAT £ 1,032.00 978.00 1,105.00 1,117.00 Specification Connected load ~ 230 V kW 2-4 4 Connected load ~ 400 V kW 2-6 8/12 12 18Power supply 1/N/PE, 3/N/PE 1/N/PE, 2/N/PE, 3/PE 3/PE 3/PERated voltage V 230/400 230/400 400 400Coil voltage V 230 230 400 400Frequency Hz 50/60 50/60 50 50

Page 183

Page 184

Page 185

Page 186

Heat pump accessories DHW heatingHeat pump accessoriesDHW heating186Product information 2025 - Subject to technical modiﬁcations.UPZBeneﬁts › Highly efﬁcient DHW circulation pump › Time switch included in standard delivery › Adjustable shutdown temperature › Low heat losses thanks to high grade insulation shellApplication • DHW circulation pump with automatic ventilation mode, suitable for detached houses and apartment buildings. • The highly efﬁcient DHW circulation pump can be controlled via the electronic control thermostat and/or the time switch. • The pump shutdown temperature can be adjusted by means of a rotary selector – this allows the pump runtime and the electronic energy demand for DHW provision to be reduced to a minimum. • Insulation shell, time switch and non-return valve are included in the standard delivery.UPZ UPZPart number 233719Price excl. VAT £ 334.00 Specification Connection G 1/2Power consumption W 2 - 27Rated voltage V 220-240Control via 0-10 V signal with IF module -Control via PWM signal -Installation length (centre distance)mm 65 UP BBeneﬁts › Circulation pump, DHW circuit › 3-stage electronic control › Inserts included in the deliveryDescription • The circulation pump for the DHW circuit can be controlled electrically in three stages. • Inserts are included in the standard delivery.UP 25-60-180 UP 25-60-180Part number 056899Price excl. VAT £ 287.00 Specification Connection G 2Power consumption W 46/67/93Rated voltage V 230Installation length (centre distance)mm 180

Page 187

next page >Heat pump accessories Heating system hydraulicsHeat pump accessoriesHeating system hydraulics187Product information 2025 - Subject to technical modiﬁcations.UPBeneﬁts › Electronically controlled circulation pump with variable differential control › Energy efﬁciency index (EEI): 0.20 › Can be controlled via either a PWM signal or differential pressure (Product: 201620) › Delivery head max. 10m (Product: 201620, 205285, 205286, 206633) › 0-10 V actuation possible with IF module (Product: 206633, 206636) › Delivery head max. 12m (Product: 206636)Description • The heating circuit pump is particularly energy efﬁcient, as electronic output control is integrated for pumping the heat transfer medium, as is variable differential control.UP 25/7.5 PCV UP 25/7.5 PCV UP 25/1-8 PCV UP 30/1-8 PCV UP 40/1-8 E UP 50/1-12 EPart number 201620 205285 205286 206633 206636Price excl. VAT £ 204.00 416.00 416.00 1,479.00 1,887.00 Specification Energy Efficiency Index EEI 0.20 0.20 0.20 0.23 0.23Connection G 1 1/2 G 1 1/2 G 2 DN 40 DN 50Delivery head m 8.40 8.00 8.00 8.00 12.00Max. flow rate m³/h 4.00 9.50 9.00 15.00 29.00Power consumption W 10-60 200 130 12-310 25-590Rated voltage V 230 230 230 230 230Control via 0-10 V signal with IF module - x x x xControl via differential pressure x x x x xControl via PWM signal x x x - -Installation length (centre distance)mm 180 180 180 220 280 Standard delivery: Insulation shell (Product: 201620) WPKI-HKBeneﬁts › Pump assembly for heating circuit without mixer › For combination with buffer cylindersDescription • The pump assembly is suitable for one heating circuit without mixer. The standard delivery includes the integral high efﬁciency heating circuit pump, shut-off valves with thermometer and gravity brake, including opening mechanism and the EPP complete insulation set with wall mounting bracket. • The pump assembly can be installed either directly on the buffer cylinder or on the wall.WPKI-HK DN 25 WPKI-HK DN 25Part number 206627Price excl. VAT £ 540.00 Specification Connection, above G 1Connection, below G 1 1/2 ACirculation pump type Wilo Para SC 25/6-43

Page 188

Heat pump accessoriesDHW heating188Product information 2025 - Subject to technical modiﬁcations. WPKI-HK DN 25Height mm 383Width mm 250Depth mm 213Energy Efficiency Index EEI 0.20Delivery head m 6.70Max. flow rate m³/h 7.80 WPKI-HKM 24Beneﬁts › Including thermal insulation and wall mounting bracket › Complete with built-in high efﬁciency pump and 24V mixer motor › Pump assembly for heating circuit with mixerDescription • Pump assembly for one heating circuit with mixer. • Included in the standard delivery are the integral high efﬁciency pump, a 24 V mixer motor, shut-off valves and thermometers for the ﬂow and return. Also included in the standard delivery are a gravity brake and the EPP complete insulation set with wall mounting bracket. • The pump assembly can be installed either on the buffer cylinder or on the wall.WPKI-HKM 24 DN 32 WPKI-HKM 24 DN 32 WPKI-HKM 24 DN 40Part number 206628 206632Price excl. VAT £ 1,550.00 3,508.00 Specification Connection, above G 1 1/4 I 1 1/2 IConnection, below G 2 A DN 40 PN6Circulation pump type Grundfos UPML 32-105 AUTO Wilo Yonos MAXO plus 40/0.5-12Height mm 441 811Width mm 250 320Depth mm 293 554Energy Efficiency Index EEI 0.20 0.20Delivery head m 10.00 12.00Max. flow rate m³/h 11.40 17.70

Page 189

Heat pump accessoriesDHW heating189Product information 2025 - Subject to technical modiﬁcations.WPKI-HKM 230Beneﬁts › Heating circuit assembly with mixing valve › Complete with high efﬁciency pump, shut-off valves and gravity valves › Including thermal insulation and wall mounting bracket › Complete with built-in high efﬁciency pump and 230V mixer motor › Pump assembly for heating circuit with mixerDescription • Pump assembly for one heating circuit with mixer. • Included in the standard delivery are the integral high efﬁciency pump, a 230 V mixer motor, shut-off valves and thermometers for the ﬂow and return. Also included in the standard delivery are a gravity brake and the EPP complete insulation set with wall mounting bracket. • The pump assembly can be installed either on the buffer cylinder or on the wall.WPKI-HKM 230 DN 25 WPKI-HKM 230 DN 25Part number 206631Price excl. VAT £ 570.00 Specification Connection, above G 1Connection, below G 1 1/2 ACirculation pump type Wilo Para SC 25/6-43Height mm 383Width mm 250Depth mm 245Energy Efficiency Index EEI 0.20Delivery head m 6.00Max. flow rate m³/h 5.70 WPKI-HKV 2Beneﬁts › Straightforward installation of two pump assemblies next to each other › Makes it easier to ensure a tidy, visually appealing installation › EPP thermal insulation included in the deliveryDescription • The manifold is suitable for the fast and visually high quality installation of up to two heating circuit pump assemblies. • The standard delivery includes the high grade EPP insulation and all required ﬁttings for wall mounting the manifold.WPKI-HKV 2 WPKI-HKV 2Part number 206638Price excl. VAT £ 308.00 Specification Connection DN 25

Page 190

Heat pump accessoriesDHW heating190Product information 2025 - Subject to technical modiﬁcations.WPKI-HKV 3Beneﬁts › Straightforward installation of up to three pump assemblies next to each other › Makes it easier to ensure a tidy, visually appealing installation › EPP thermal insulation included in the deliveryDescription • The manifold is suitable for the fast and visibly high quality installation of up to three heating circuit pump assemblies. • The standard delivery includes the high grade EPP insulation and all required ﬁttings for wall mounting the manifold.WPKI-HKV 3 WPKI-HKV 3Part number 206637Price excl. VAT £ 415.00 Specification Connection DN 25 HUVBeneﬁts › The ready-to-use actuator is supplied installed on the 3-way diverter valve › Can be installed vertical to horizontal › Maintenance-freeDescription • The 3-way heating diverter valve with servomotor is suitable for installation in heating systems.HUV 1 HUV 1 HUV 2Part number 227420 223391Price excl. VAT £ 347.00 768.00 Specification Connection G1 G 2kVS value m³/h 26 49IP rating IP54 IP54Runtime 90 s / 90° 90 s / 90°Weight kg 1.65 4.80

Page 191

Heat pump accessoriesDHW heating191Product information 2025 - Subject to technical modiﬁcations.HUKBeneﬁts › Set with two changeover dampers › Robust design for a long service life › Available for various dimensionsDescription • The changeover damper with servomotor is suitable for installation in heating systems. • Connected via a ﬂange with lug eyes.HUK 100 Set HUK 100 Set HUK 125 Set HUK 150 Set HUK 200 SetPart number 203711 203712 203713 203714Price excl. VAT £ 1,983.00 2,075.00 3,692.00 4,333.00 Specification Connection DN 100 DN 125 DN 150 DN 200kVS value m³/h 150 260 400 820Leakage rate tight, leakage rate A (EN 12266-1)tight, leakage rate A (EN 12266-1)tight, leakage rate A (EN 12266-1)tight, leakage rate A (EN 12266-1)IP rating IP54 IP54 IP66 IP66Control Open/closed Open/closed Open/closed Open/closedRuntime 150 s / 90° 150 s / 90° 35 s / 90° 35 s / 90°Butterfly valve weight kg 4 6.7 7.4 14Rotary drive weight kg 4.1 4.1 5.8 5.8 Standard delivery includes: 2 butterﬂy valves each with a rotary drive.Availability on requestFS-HPBeneﬁts › Liquid and gaseous media in the pipework are monitored by the FS-HP ﬂow switchDescription • The FS-HP ﬂow switch can be used to reliably monitor liquid and gaseous media in pipelines. • A connec-tion adaptor to G 1/4“ and a ﬁve metre PUR cable with a 1/2“ plug-in connection are included in the standard delivery.FSHP-L45 FSHP-L45Part number 202779Price excl. VAT £ 672.00

Page 192

Page 193

Page 194

Page 195

Page 196

next page >Central ventilation units Supply and extract air with heat recovery, wall mountingCentral ventilation unitsSupply and extract air with heat recovery, wall mounting196Product information 2025 - Subject to technical modiﬁcations.VRC-W 450/600 PremiumBeneﬁts › Central supply and extract air system for optimum air quality › Durable and hygienic polymer heat exchanger with high thermal efﬁciency › Well designed condensate drain prevents water leaks even in tropical climates › Efﬁcient operation through by the constant ﬂow rate fan, which ensures a balanced air ﬂow rate › Balanced ﬂow rate in winter by means of integral preheating coil › The programming unit can also be used as a remote control for ventilation regulated by the humidity sensor › Easy electrical installation as the connection panel is readily accessible even when the appliance is closed › Convenient CO2-controlled ventilation via the removable programming unit that can be used as a remote controlApplication • This central ventilation unit is suitable for use in family houses, apartments and small commercial properties. • It is distinguished by its high air ﬂow rate and heat recovery for ventilation.Convenience features • The ventilation unit boasts a compact, aesthetic design with ergonomic user interface. Remote control with matrix display; eleven languages available. • Easy and convenient control of the appliance via Wi-Fi® and the MyStiebel app for a comfortable climate. The MyStiebel app is the platform for remote operation of many appliances and systems such as ventilation systems and heat pumps from STIEBEL ELTRON • Electrical preheating via high performance heating coil. • Energy savings thanks to bypass duct with damper in the supply air line for passive cooling/heating. • Multiple sensors for temperature, humidity and CO2/VOC for zone control. • Separate ﬁlter cover. Easy ﬁlter change thanks to individually replaceable frame ﬁlters. HEPA ﬁlter against COVID-19 and PM2.5 available as accessory. • Powder coated sheet steel casing.Efﬁciency • High thermal efﬁciency and high moisture recovery. Energy savings with both cooling and heating func-tions. • High efﬁciency cross-countercurrent heat exchanger. • High electrical efﬁciency (SPI) of the integral EC fan with constant air ﬂow rate control.Installation • Installation in dwellings, utility rooms, basements, etc. The air connections are located at the top of the appliance and the electrical connection panel can be easily accessed. • The appliance can be converted on site for connection on the right or left in just a few simple steps, thus offering maximum ﬂexibility during installation. • Easy maintenance: Heat exchangers and ﬁlters can be serviced without tools.VRC-W 450 Premium VRC-W 450 Premium VRC-W 600 Premium NEW NEWPart number 204940 204714Price excl. VAT £ 2,695.00 3,195.00 Specification Heat recovery level up to % 94.5 90Filter class ePM1 ≥ 50 % (F7) | ISO Coarse > 60 % (G4) ePM1 ≥ 50 % (F7) | ISO Coarse ≥ 65 % (G4)Sound power level (EN 12102) dB(A) 48,5 53,7Height mm 975 975Width mm 740 740Depth mm 655 655Air connection diameter mm 180 180WLAN 802.11b/g/n/ 2.4 GHz/DHCP 802.11b/g/n/ 2.4 GHz/DHCPWeight kg 63 57Rated voltage V 230 230Specific energy consumption in moderate climates, time controlkWh/(m²a)-40.35 -38.30Specific energy consumption in moderate climates, central demand-dependent controlkWh/(m²a)-41.69 -39.99Energy efficiency class, moder-ate climates, time control A AEnergy efficiency class, mod-erate climates, central de-mand-dependent control A AEnergy efficiency class A+ A

Page 197

Page 198

Page 199

Page 200

next page >Central ventilation unitsSupply and extract air with heat recovery, wall mounting200Product information 2025 - Subject to technical modiﬁcations.VRC-W 450/600 E PremiumBeneﬁts › Central supply and extract air system for optimum air quality › Durable and hygienic polymer heat exchanger with high thermal efﬁciency › Moisture in the air is recovered by means of the integral enthalpy heat exchanger › Well designed condensate drain prevents water leaks even in tropical climates › Efﬁcient operation through by the constant ﬂow rate fan, which ensures a balanced air ﬂow rate › Balanced ﬂow rate in winter by means of integral preheating coil › The programming unit can also be used as a remote control for ventilation regulated by the humidity sensor › Easy electrical installation as the connection panel is readily accessible even when the appliance is closed › Convenient CO2-controlled ventilation via the removable programming unit that can be used as a remote controlApplication • This central ventilation unit is suitable for use in family houses, apartments and small commercial properties. • It is distinguished by its high air ﬂow rate and heat recovery for ventilation.Convenience features • The ventilation unit boasts a compact, aesthetic design with ergonomic user interface. Remote control with matrix display; eleven languages available. • Easy and convenient control of the appliance via Wi-Fi® and the MyStiebel app for a comfortable climate. The MyStiebel app is the platform for remote operation of many appliances and systems such as ventilation systems and heat pumps from STIEBEL ELTRON • Electrical preheating via high performance heating coil. • Energy savings thanks to bypass duct with damper in the supply air line for passive cooling/heating. • Multiple sensors for temperature, humidity and CO2/VOC for zone control. • Separate ﬁlter cover. Easy ﬁlter change thanks to individually replaceable frame ﬁlters. HEPA ﬁlter against COVID-19 and PM2.5 available as accessory. • Powder coated sheet steel casing.Efﬁciency • High thermal efﬁciency and high moisture recovery. Energy savings with both cooling and heating func-tions. • High efﬁciency cross-countercurrent heat exchanger. • High electrical efﬁciency (SPI) of the integral EC fan with constant air ﬂow rate control.Installation • Installation in dwellings, utility rooms, basements, etc. The air connections are located at the top of the appliance and the electrical connection panel can be easily accessed. • The appliance can be converted on site for connection on the right or left in just a few simple steps, thus offering maximum ﬂexibility during installation. • Easy maintenance: Heat exchangers and ﬁlters can be serviced without tools.VRC-W 450 E Premium VRC-W 450 E Premium VRC-W 600 E Premium NEW NEWPart number 204941 204715Price excl. VAT £ 3,180.00 3,680.00 Specification Heat recovery level up to % 77 74.8Filter class ePM1 ≥ 50 % (F7) | ISO Coarse > 60 % (G4) ePM1 ≥ 50 % (F7) | ISO Coarse ≥ 65 % (G4)Sound power level (EN 12102) dB(A) 48,5 53,7Height mm 975 975Width mm 740 740Depth mm 655 655Air connection diameter mm 180 180WLAN 802.11b/g/n/ 2.4 GHz/DHCP 802.11b/g/n/ 2.4 GHz/DHCPWeight kg 63 63Rated voltage V 230 230Specific energy consumption in moderate climates, time controlkWh/(m²a)-37.07 -34.99Specific energy consumption in moderate climates, central demand-dependent controlkWh/(m²a)-38.71 -36.98Energy efficiency class, moder-ate climates, time control A AEnergy efficiency class, mod-erate climates, central de-mand-dependent control A AEnergy efficiency class A+ A

Page 201

Page 202

Page 203

Page 204

Page 205

Page 206

next page >Accessories, central ventilation units ControllersAccessories, central ventilation unitsControllers206Product information 2025 - Subject to technical modiﬁcations.FEB 2.0Beneﬁts › Plain text display for understandable information › Multiple languages available › Operating mode can be switched easily via the Touch-Wheel › Rapid ventilation function is started with action button › Filter change and fault indicatorsDescription • The new FES/FEB control is combined with the central ventilation units 180/280. It enables both conven-ient operation and the display of system parameters speciﬁc to the living space. • Clear, understandable information via the plain text matrix display. • Customers can choose between different languages.FEB 2.0 FEB 2.0 NEWPart number 205018Price excl. VAT £ 119.00 Specification Rated voltage V 5IP rating IP22Colour whiteWidth mm 145Height mm 96Depth mm 31FEB controller (2.0) is converted to a matrix display with plain text (Product: 205018) FEB 2.1Beneﬁts › Control module with integral CO2/VOC sensor › Plain text display for understandable information › Multiple languages available › Operating mode can be switched easily via the Touch-Wheel › Action button starts rapid ventilation function › Filter change and fault indicatorsDescription • This control (2.1) is combined with central ventilation units. It is equipped with an integral CO2/VOC sensor. The controller enables convenient operation of the ventilation unit and also displays system parameters speciﬁc to the living space. • Clear, understandable information via the plain text matrix display. • Customers can choose between different languages.FEB 2.1 FEB 2.1 NEWPart number 206612Price excl. VAT £ 171.00 Specification Air quality sensor CO2Rated voltage V 5IP rating IP22

Page 207

Accessories, central ventilation unitsControllers207Product information 2025 - Subject to technical modiﬁcations. FEB 2.1Colour whiteWidth mm 145Height mm 96Depth mm 31 WLAN VRC .1Beneﬁts › WLAN module for central ventilation units › Convenient control via MyStiebel app › Quick and easy to install › Strong WLAN signal for reliable connectionsDescription • With this module, central ventilation units can be incorporated in an existing WLAN. • All functions can be conveniently controlled from anywhere via the MyStiebel app. • The module is easy to install and the strong WLAN signal ensures a reliable connection.WLAN VRC .1 WLAN VRC .1 NEWPart number 206611Price excl. VAT £ 103.00 Specification Installation type Wall mounted applianceWLAN 802.11b/g/n/ 2.4 GHz/DHCPSupply voltage V 5Power consumption W 0,8Colour whiteWidth mm 135Height mm 180Depth mm 35Weight kg 0.70Application limit °C 0 - 45Storage and transportation temperature°C -25 - +55

Page 208

Accessories, central ventilation units FilterAccessories, central ventilation unitsFilter208Product information 2025 - Subject to technical modiﬁcations.FMS EPMC 65-10 W450/600Beneﬁts › G4 ﬁlter for LWZW-450/600(E), VRC-W450/600 (E) and TVZ450/600 › ISO Coarse 65% › Fleece ﬁlter mats for replacement › Filter standard to ISO16890Description • The set contains 10 ﬁlter mats made of synthetic nonwoven ﬂeece. No chemical binders are added. • The outstanding dust-holding capacity with little pressure drop is achieved through the progressively compressed construction and an optimised nonwoven structure.FMS EPMC 65-10 W450/600 FMS EPMC 65-10 W450/600 NEWPart number 206610Price excl. VAT £ 121.00 Specification Quantity 10Filter class ISO Coarse > 60 % (G4)Application Ventilation units FMK EPM1 70-2 W450/600Beneﬁts › ISO ePM1 70% › Integral pull tab for easy replacement › Set with ﬁne ﬁlters for ventilation systemsDescription • The replacement ﬁlter cassettes for supply air are made from unbreakable polyester ﬁbres with a partially progressive structure. They are thermally bonded, temperature-resistant to 100 °C and pleated in a Z-shape. • The sturdy frame is made of moisture-resistant cardboard, with a pull tab integrated on the front.FMK EPM1 55-2 W450/600 FMK EPM1 55-2 W450/600 NEWPart number 206596Price excl. VAT £ 45.00 Specification Quantity 2Filter class ePM1 ≥ 50 % (F7)Application Ventilation units

Page 209

Page 210

Page 211

Page 212

Distribution system for integral and central ventilationLVS inﬂoorDistribution system for integral and central ventilationLVS inﬂoor212Product information 2025 - Subject to technical modiﬁcations.LVS VTSBeneﬁts › Excellent sound attenuation at low frequencies › Distributor plate and inspection cover can be interchanged › Can be installed on the wall, ceiling or in a stud frame › Air volumes can be adjusted at the distributorDescription • The sound insulated air distributor for the ﬂexible LVS inﬂoor and LVE onﬂoor air distribution systems is mounted on the wall or ceiling.LVS VTS 6 LVS VTS 6 LVS VTS 9 NEW NEWPart number 201456 234493Price excl. VAT £ 459.00 550.00 Specification Height mm 150 250Width mm 500 500Length mm 640 1165Insertion loss at 63 Hz dB 3 5Insertion loss at 125 Hz dB 9 10Insertion loss at 250 Hz dB 15 10Insertion loss at 500 Hz dB 30 18Insertion loss at 1000 Hz dB 28 36Insertion loss at 2000 Hz dB 28 32Insertion loss at 4000 Hz dB 20 23Insertion loss at 8000 Hz dB 19 16

Page 213

Page 214

Page 215

Page 216

next page >Decentralised ventilation in residential buildingsSupply and extract air with heat recoveryDecentralised ventilation in residential buildingsSupply and extract air with heat recovery216Product information 2025 - Subject to technical modiﬁcations.VLR 70 S/L TrendBeneﬁts › Decentralised ventilation unit with heat recovery for new build and modernisation › Rapid, hygienic cleaning thanks to aluminium heat exchanger › Very good ﬁlter performance due to ﬁlters on the inside and outside › No condensate run marks on the wall face › Quick, tool-free ﬁlter change and tool-free visual monitoring of the heat exchanger due to the compact design of the fan unitApplication • This decentralised ventilation unit with heat recovery is used for ventilating apartments and small commercial properties.Convenience features • Contemporary design with separate programming unit. • Thanks to the axial fan that can overcome back-pressure, use in locations exposed to the wind is possible. • The appliance is equipped with an efﬁcient heat exchanger made of aluminium. • The external panel is watertight against heavy rain; it is made of stainless steel and powder coated. The internal panel is made of plastic. • Straightforward ﬁlter replacement with easy-to-remove fan unit. Fine dust ﬁlters are available as accessories.Efﬁciency • EC fan ensures efﬁcient operation.Installation • The unit is installed in a round or square wall outlet. • The easily accessible mains connection is located on the inside of the fan unit.VLR 70 L Trend EU VLR 70 L Trend EUPart number 203133Price excl. VAT £ 316.00 Specification Sound power level LW total rel-ative to air flow ratedB(A) 36 (20 m³/h)Weight kg 5.20IP rating IP21Min. outlet aperture mm Ø 200, 185x185Air flow rate m³/h 20/30/40/49/70Rated voltage V 24Energy efficiency class, mod-erate climates, central de-mand-dependent control A+Height mm 285Width mm 360Depth mm 780 Required accessories Part number 239570Type VLR 70-2 CUDescription Control set for VLR 70Price excl. VAT £ 225.00Part number 239571Type VLR 70-4 CUDescription Control set for VLR 70Price excl. VAT £ 234.00Part number 239572Type VLR 70-8 CUDescription Control set for VLR 70Price excl. VAT £ 246.00 Maintenance Part number 201274Type SP VLR 70 RF EPM1 80 F9-4Description Filter for VLR 70Price excl. VAT £ 33.00

Page 217

Page 218

Decentralised ventilation in residential buildingsExtract air without heat recoveryDecentralised ventilation in residential buildingsExtract air without heat recovery218Product information 2025 - Subject to technical modiﬁcations.LA 100Beneﬁts › Decentralised extractor for rooms with and without windows › For use in traditional extract air areas, such as the bathroom, kitchen and WC › Modernisation solution that is easy to install › Ideal for combination with our decentralised ventilation units › Energy efﬁcient EC fan for low noise pollution at high air ﬂow rates › Quiet operation (Product: 205771) › Fan unit for single ventilation units to DIN 18017-3 (Product: 205771) › Fan unit for surface mounting (Product: 205771)Application • This fan unit for extractors ventilates rooms with and without external windows.Convenience features • The casing, internal panel and ﬁlter holder are made from high quality white plastic. All appliances are equipped with a start delay and run-on time. If required, this can be extended by a humidity sensor. Subsequent extension of the control module is also possible in its installed state.Efﬁciency • The fan unit has a very energy efﬁcient and quiet fan motor.Installation • Depending on the selected version, the appliances are suitable for installation in walls and ceilings or surface mounting. The electrical connection of the fan unit is easily accessible.LA 100 A LA 100 APart number 205771Price excl. VAT £ 341.00 Specification Type of ventilation VentilationFilter class G3Filter class ePM10 ≥ 50 % (M5) | ISO Coarse > 45 % (G3)Max. power consumption W 15.3Power consumption at 30 m³/h W 2.2Power consumption at 60 m³/h W 4.5Power consumption at max. flow rateW 15.3Sound power level LWA dB(A) 47Sound power level LWA at 60 m³/hdB(A) 40Sound power level LWA at 30 m³/hdB(A) 33Weight kg 2.30IP rating IP X5Max. air flow rate m³/h 90 Recommended accessories Part number 205830Type ZLA 100-HDescription Control module with humidity controlPrice excl. VAT £ 98.00Part number 231104Type LWF W 100 VA - 60Description External wall outletPrice excl. VAT £ 105.00 Maintenance Part number 201455Type FMS G3-5 LA 60Description Filter mat set for extract air fanPrice excl. VAT £ 14.00

Page 219

Page 220

Page 221

Page 222

Page 223

Page 224

Page 225

Accessories for decentralised ventilation in residential buildingsAccessories for controllersAccessories for decentralised ventilation in residential buildingsAccessories for controllers225Product information 2025 - Subject to technical modiﬁcations.ZLWE 40 CO2Beneﬁts › CO2 sensor with adjustable switching threshold › Adjustable hysteresisDescription • The CO2 sensor is used for demand-dependent, enhanced ventilation mode. • Standard delivery includes a sensor and the threshold switch.ZLWE CO2 ZLWE CO2Part number 236673Price excl. VAT £ 204.00 Specification Version Room sensorWidth mm 80Height mm 100Depth mm 28 VLR 70-2/4/8 CUBeneﬁts › Matched accessories for VLR 70 › Simple to control via the ergonomic programming unit › Basic module including power supply unit and ﬂush box (Product: 239570) › Number of fans per control unit: max. 2 (Product: 239570) › Number of fans per control unit: max. 4 (Product: 239571) › Expansion set for controlling additional fan units (Product: 239571, 239572) › Number of fans per control unit: max. 8 (Product: 239572)Description • The control set comprises control unit, power supply unit and programming unit for controlling the ventilation units. • An LED on the control unit reminds the user to clean or replace the ﬁlter. These signals are issued according to the operating time. • The programming unit is installed in the supplied ﬂush box. • The power supply unit is designed for top hat rail mounting. VLR 70-2 CU VLR 70-2 CU VLR 70-4 CU VLR 70-8 CUPart number 239570 239571 239572Price excl. VAT £ 225.00 234.00 246.00 Specification Number of fans per control unit max. 2 max. 4 max. 8Power supply 1/N 100-240 V 50/60 Hz 1/N 100-240 V 50/60 Hz 1/N 100-240 V 50/60 HzWidth mm 80 Height mm 80 Depth mm 9 User interface, control module, power supply, control panel with frame User interface, control module, power supply, frame (Product: 239571, 239572)

Page 226

Page 227

Accessories for decentralised ventilation in residential buildingsFilterAccessories for decentralised ventilation in residential buildingsFilter227Product information 2025 - Subject to technical modiﬁcations.SP VLR 70 RFBeneﬁts › Matched accessories for VLR 70 › Different ﬁlter classes available › 4 Filter for the Filter class G2 (Product: 239562) › 4 Filter for the Filter class F9 (Product: 201274) › 4 Filter for the Filter class F7 (Product: 239577)Description • Filter for VLR 70SP VLR 70 RF COARSE 30 G2-4 SP VLR 70 RF COARSE 30 G2-4 SP VLR 70 RF EPM1 80 F9-4 SP VLR 70 RF EPM1 50 F7-4Part number 239562 201274 239577Price excl. VAT £ 13.00 33.00 36.00 Specification Quantity 4 4 4Filter class ISO Coarse > 30 % (G2) ePM1 ≥ 80 % (F9) ePM1 ≥ 50 % (F7)Application Ventilation units Ventilation units Includes four G2 ﬁlters Includes four F9 ﬁlters Includes four F7 ﬁlters (Product: 239577) SP VLR 70 RF COARSE 60 G4-4Beneﬁts › Set with four ﬁlters › Filter class G4Description • Filter for VLR 70SP VLR 70 RF COARSE 60 G4-4 SP VLR 70 RF COARSE 60 G4-4Part number 239575Price excl. VAT £ 30.00 Specification Quantity 4Filter class ISO Coarse > 60 % (G4) Includes four G4 ﬁlters (Product: 239575)

Page 228

Page 229

Page 230

Page 231

Page 232

next page >Storage heaters Slimline storage heaterStorage heatersSlimline storage heater232Product information 2025 - Subject to technical modiﬁcations.SHS 1200-4800Beneﬁts › For convenient, energy saving operation, C-Plus technology is used as an intelligent automatic charging system. › Enable time for charging can be set directly on the appliance › Integral RT controller with weekly timer and open window detection › In timer mode, the self-learning control unit calculates the preheating time automatically › Increased safety, as the high limit safety cut-out does not reset automatically › The connected load can be reduced with a 3-phase connection › Quiet crossﬂow fan › As standard with ﬂuff ﬁlterApplication • This compact slimline storage heater takes up only minimal space once installed on the ﬂoor or on the wall. • The appliance is suitable as a standalone heater for apartments or commercial spaces and is used with off-peak economy tariff models with blocking times. Convenience features • The integral electronic charge controller with C-Plus technology charges the appliance fully automatically and according to demand, without the need for additional control units. • The required room tempera-ture and the enable time for charging can be easily adjusted on the display. • In addition to the programmable weekly timer, 2 preset time programs and 1 individually programmable time program are provided. • In timer mode, the comfort temperature is achieved at precisely the right time thanks to the adaptive control with learning function. • If required, users are able to activate a function on the appliance which detects when windows are open; this avoids unnecessary energy loss. • In addition to the comfort temperature, it is also possible to program the setback tempera-ture. • The connected load can be reduced in four stages. • The control input for AC signals is conﬁgured at the factory; the control input for DC signals is available as an optional accessory. • An auxiliary heater can be integrated as an option. • Integral childprooﬁng as the programming unit can be locked. • High heat retention capacity. • The storage heater is equipped as standard with a ﬂuff ﬁlter. • Low-noise crossﬂow fans are integrated to ensure quiet operation.Installation • Installation as a wall mounted appliance with standard wall mounting brackets or directly on the ﬂoor. Off-ﬂoor installation with mounting brackets is also possible. Optional support brackets are available where walls do not have adequate load bearing capacity. • The single-phase or three-phase mains connection is straightforward even in recesses thanks to the hinged and easily accessible connection panel. A permanent control voltage is required.Safety • The storage heater is equipped with an integral high limit safety cut-out.SHS 1200 SHS 1200 SHS 1800 SHS 2400 HHR* SHS 3000 HHR*Part number 200181 200182 200183 200184Price excl. VAT £ 723.00 743.00 804.00 859.00 Specification Power supply 1/N/PE, 3/N/PE 1/N/PE, 3/N/PE 1/N/PE, 3/N/PE 1/N/PE, 3/N/PEFrequency Hz 50/- 50/- 50/- 50/-Rated current A 1,7 2,6 3,5 4,3Rated connected load kW 1.20 1.80 2.40 3.00Fuse protection A 10 10 10 10Heating output W 480 730 970 1170Operating noise dB(A) 29 28,5 31 32Heat retention capacity % 39 44 46 48Height mm 546 546 546 546Width mm 580 741 902 1063Depth mm 218 218 218 218Weight kg 24 30 37 43Weight (incl. bricks) kg 74 106 138 169Number of brick packs 6 9 12 15Colour alpine white alpine white alpine white alpine white *HHR = High Heat Retention

Page 233

next page >Storage heatersSlimline storage heater233Product information 2025 - Subject to technical modiﬁcations. SHS 1200 SHS 1800 SHS 2400 HHR* SHS 3000 HHR*Recommended accessories Part number 238723 Type Zhzg. 0,35kW Description Auxiliary heater for storage heater Price excl. VAT £ 70.00 Part number 238724 Type Zhzg. 0,5kW Description Auxiliary heater for storage heater Price excl. VAT £ 70.00 Part number 238725 Type Zhzg. 0,8kW Description Auxiliary heater for storage heater Price excl. VAT £ 77.00 Part number 238726Type Zhzg. 1kWDescription Auxiliary heater for storage heaterPrice excl. VAT £ 77.00 SHS 3600 SHS 4200 SHS 4800Part number 200185 200186 200187Price excl. VAT £ 913.00 987.00 1,043.00 Specification Power supply 1/N/PE, 3/N/PE 1/N/PE, 3/N/PE 1/N/PE, 3/N/PEFrequency Hz 50/- 50/- 50/-Rated current A 5,2 6,1 7,0Rated connected load kW 3.60 4.20 4.80Fuse protection A 10 10 16Heating output W 1360 1590 1800Operating noise dB(A) 32 32 32Heat retention capacity % 49 51 51Height mm 546 546 546Width mm 1224 1385 1546Depth mm 218 218 218Weight kg 50 57 63Weight (incl. bricks) kg 201 233 265Number of brick packs 18 21 24Colour alpine white alpine white alpine white Recommended accessories Part number 182101 182101Type ZWSK ZWSKDescription Support bracket for slimline storage heater.Support bracket for slimline storage heater.Price excl. VAT £ 34.00 34.00Part number 238727 Type Zhzg. 1,2kW Description Auxiliary heater for storage heater Price excl. VAT £ 81.00 Part number 238728 Type Zhzg. 1,5kW Description Auxiliary heater for storage heater Price excl. VAT £ 92.00

Page 234

Page 235

Page 236

Accessories for storage heaters AccessoriesAccessories for storage heatersAccessories236Product information 2025 - Subject to technical modiﬁcations.Aux. htrBeneﬁts › Installation-ready complete setDescription • The auxiliary heater serves as a comfort heater outside the heating season if the storage heater is not charged or is insufﬁciently charged. • The electric auxiliary heater runs on the normal household tariff and only switches on if the storage heater cannot deliver the required temperatures.Zhzg. 0,35kW Zhzg. 0,35kW Zhzg. 0,5kW Zhzg. 0,8kW Zhzg. 1kWPart number 238723 238724 238725 238726Price excl. VAT £ 70.00 70.00 77.00 77.00 Specification Connected load kW 0,35 0.5 0,8 1 Zhzg. 1,2kW Zhzg. 1,5kW Zhzg. 1,7kWPart number 238727 238728 238915Price excl. VAT £ 81.00 92.00 92.00 Specification Connected load kW 1,2 1.5 1,7 Kit complete with safety temperature controller and ﬁxing materials for retroﬁtting in the storage heater.Suitable for slimline storage heater 1.2kW/standard storage heater 2kW Suitable for slimline storage heater 1.8kW/standard storage heater 3kW Suitable for slimline storage heater 2.4kW/standard storage heater 4kW Suitable for slimline storage heater 3kW/standard storage heater 5kW/low-level storage heater 3.5kW Suitable for slimline storage heater 3.6kW/standard storage heater 6kW Suitable for slimline storage heater 4.2kW/standard storage heater 7kW/low-level storage heater 5kW Suitable for slimline storage heater 4.8kW (Product: 238915)ZWVKBeneﬁts › Vario mounting brackets for storage heater › Two-piece set › Positioning the storage heater with ground clearance of 100mmDescription • The set for off-ﬂoor appliance installation has an adjustable tilt.ZWVK 1 ZWVK 1 ZWVK 2Part number 182028 182102Price excl. VAT £ 111.00 111.00 Mounting brackets for standard and low-level storage heater Mounting brackets for slimline storage heater (Product: 182102)

Page 237

Page 238

Page 239

Page 240

Page 241

Page 242

Page 243

Page 244

Convectors Wall installationConvectorsWall installation244Product information 2025 - Subject to technical modiﬁcations.CON Premium UBeneﬁts › Elegant design with aluminium front › Electronic controller with illuminated LCD screen › Weekly timer with 3 time programs, self-learning function and open window detection › With short-time timer › Safety through overheating protection › Omnipolar operating selector › Long lasting stainless steel tubular heater with steel ﬁns › Permanent connection with FIL-pilot control cable › During a power failure, the clock is buffered for up to 10 hoursApplication • This high quality convector is suitable as a standalone heater, as an efﬁcient interim heater in spring/autumn, or for additional heat demand. • Thanks to its very compact design, the wall mounted appliance takes up very little space. • The appliance can be integrated into systems with central FIL-pilot control. • The convector has won the Red Dot Design Award and suits any setting.Convenience features • The premium convector with electronic closed-loop control is equipped with a large, easy-to-read display. • The required room temperature can be easily set to the exact degree at the top-mounted programming unit. • In addition to the programmable weekly timer, there are two preset and one individually programmable time programs available. • In addition to the comfort temperature, it is also possible to program the setback temperature. In timer mode, the comfort temperature is achieved at precisely the right time thanks to the adaptive control with learning function. • Stainless steel tubular heaters with steel ﬁns contribute to its long service life. The appliance has an integral frost protection setting. • A design highlight is the aluminium front.Efﬁciency • Users can activate a function on the appliance which detects open windows, thereby avoiding unneces-sary energy loss.Installation • Straightforward, stable wall mounting needs one person only because the wall mounting bracket is ﬁtted to the wall separately from the appliance and can be readjusted later. All that then remains is to hook the mainte-nance-free appliance into place. • The power cable with FIL-pilot control core is prewired for permanent connection.Safety • Integral childprooﬁng as the programming unit can be locked. • Integral high limit safety cut-out.CON 5 Premium U CON 5 Premium U CON 10 Premium U CON 15 Premium U CON 20 Premium U CON 30 Premium UPart number 201278 200268 200269 200270 200276Price excl. VAT £ 259.00 267.00 273.00 280.00 376.00 Specification Power supply 1/N/PE ~ 230 V 1/N/PE ~ 230 V 1/N/PE ~ 230 V 1/N/PE ~ 230 V 1/N/PE ~ 230 VRated voltage V 230 230 230 230 230Rated current A 2,2 4,3 6,5 8,7 13,0Connected load W 500 1000 1500 2000 3000Connected load kW 0,5 1,0 1,5 2 3Setting range °C 5-30 5-30 5-30 5-30 5-30IP rating IP24 IP24 IP24 IP24 IP24Protection class I I I I IHeight mm 470 470 470 470 470Width mm 345 470 625 780 1090Depth mm 126 126 126 126 126Weight kg 4.30 5.90 7.50 9.30 12.60Colour alpine white alpine white alpine white alpine white alpine white Depth including wall mounting bracket

Page 245

next page >ConvectorsWall installation245Product information 2025 - Subject to technical modiﬁcations.CNS Connect UKBeneﬁts › Wall mounted and networkable convector as a standalone heater or for central heating backup › Control at home and on the move via the EASYTRON base station and the free, intuitive app › Conveniently set time programs for efﬁcient and economical operation via app › Combine and control several convectors from speciﬁc rooms as a group › Activate predeﬁned scenarios quickly and easily with just one tap (comfort, setback or standby mode) › Statistics on energy consumption and energy costs for full transparency › Simple and guided process for setup and commissioning › Electronic controller with illuminated LCD screen › Safety through overheating protection › Long lasting stainless steel tubular heater with aluminium coated steel ﬁnsApplication • This wall mounted, networkable convector is used as a standalone electric heater, an efﬁcient interim heater in spring/autumn, or simply for additional heat demand in the living space, bathroom or study. • The timeless and slimline design suits any setting. • The intuitive and convenient app-based operation ensures a high degree of heating comfort along with energy saving operation. Both individual appliances or a group of several convectors can be controlled. Communication takes place wirelessly via the EASYTRON base station.Convenience features• The electronically controlled convector can be controlled via the integral programming unit or via the free app. Access via the app is possible both at home and when away. This requires the optional EASYTRON base station. • Both individual appliances and a group of several convectors (for example in a room) can be conven-iently and intuitively operated. The app enables access to additional operating modes and provides transparency about consumption and costs by means of user friendly statistics. Time programs can be conveniently set and ensure energy and cost efﬁcient operation. Predeﬁned scenarios for comfort, setback and standby modes are available at your ﬁngertips for quick activation. • The convector heats up the indoor air evenly and silently. • Further beneﬁts include the backlit display, the time programs and window-open detection to prevent energy wastage. • The appliance has a frost protection setting and an omnipolar operating selector. The high grade stainless steel tubular heater with aluminium coated steel ﬁns is integrated in a robust metal casing.Installation • Quick and secure wall mounting can be carried out by just one person, as the wall mounting bracket is installed separately and can be readjusted later. All that remains is to hook the appliance into place. • A guided process is provided for quick and convenient networking and setting up of the app-based control.Safety• Integral high limit safety cut-out. • The childprooﬁng feature provides protection against unintentional mod-iﬁcations.CNS 50 Connect UK CNS 50 Connect UK CNS 75 Connect UK CNS 100 Connect UK CNS 150 Connect UKPart number 205639 205640 205641 205642Price excl. VAT £ 223.00 230.00 237.00 268.00 Specification Power supply 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 VRated voltage V 240 240 240 240Rated current A 2,1 3,1 4,2 6,3Connected load W 500 750 1000 1500Connected load kW 0,5 0,75 1 1,5Setting range °C 5-30 5-30 5-30 5-30IP rating IP24 IP24 IP24 IP24Protection class I I I IHeight mm 450 450 450 450Width mm 348 426 426 582Depth mm 100 100 100 100Weight kg 4.00 4.60 4.60 6.00Colour alpine white alpine white alpine white alpine white

Page 246

ConvectorsWall installation246Product information 2025 - Subject to technical modiﬁcations. CNS 50 Connect UK CNS 75 Connect UK CNS 100 Connect UK CNS 150 Connect UKRequired accessories Part number 207642 207642 207642 207642Type EZE CNS Connect EZE CNS Connect EZE CNS Connect EZE CNS ConnectDescription EASYTRON CNS Connect base stationEASYTRON CNS Connect base stationEASYTRON CNS Connect base stationEASYTRON CNS Connect base stationPrice excl. VAT £ 249.00 249.00 249.00 249.00 CNS 200 Connect UK CNS 250 Connect UK CNS 300 Connect UKPart number 205643 205644 205645Price excl. VAT £ 275.00 315.00 325.00 Specification Design 0-2000W Power supply 1/N/PE ~240 V 1/N/PE ~ 240 V 1/N/PE ~240 VRated voltage V 240 240 240Rated current A 8,3 10,4 12,5Connected load W 2000 2500 3000Connected load kW 2 2,6 3Setting range °C 5-30 5-30 5-30IP rating IP24 IP24 IP24Protection class I I IHeight mm 450 450 450Width mm 738 894 1050Depth mm 100 100 100Weight kg 7.70 9.20 10.90Colour alpine white alpine white alpine white Required accessories Part number 207642 207642 207642Type EZE CNS Connect EZE CNS Connect EZE CNS ConnectDescription EASYTRON CNS Connect base stationEASYTRON CNS Connect base stationEASYTRON CNS Connect base stationPrice excl. VAT £ 249.00 249.00 249.00 Depth including wall mounting bracket

Page 247

next page >ConvectorsWall installation247Product information 2025 - Subject to technical modiﬁcations.CNS-U Plus LCDBeneﬁts › Weekly timer with 3 time programs, self-learning function and open window detection › During a power failure, the clock is buffered for up to 10 hours › Permanent connection with FIL-pilot control cable › Electronic controller with illuminated LCD screen › Long lasting stainless steel tubular heater with steel ﬁns › Safety through overheating protection › Compact metal casing in a slimline design › Omnipolar operating selector › Wall mounted convector heaters with high heating output › In timer mode, the self-learning control unit calculates the preheating time automaticallyApplication • This compact wall mounted convector is suitable as a standalone heater, as an efﬁcient interim heater in spring/autumn and for additional heat demand in the living space, bathroom or study. • The appliance can be integrated into systems with central FIL-pilot control. • The timeless and very slimline design suits any setting.Convenience features • The indoor air is heated evenly and silently by the electronically controlled convector with easy-to-read display and simple programming. • The required room temperature is easy to set at the programming unit. • The convector can be adjusted to suit individual needs. For this, a programmable weekly timer is integrated with two preset time programs and one customisable time program. • In timer mode, the comfort temperature is achieved at precisely the right time thanks to adaptive control with learning function. • Comfort temperature and setback temperature are programmable. • The user can activate an application that detects open windows. • The ap-pliance has a frost protection setting. • The convector has an omnipolar operating selector. • The high grade stainless steel tubular heater with aluminium coated steel ﬁns is integrated in a robust metal casing.Installation • Straightforward, stable wall mounting needs one person only: the wall mounting bracket is ﬁtted to the wall separately from the appliance and can be readjusted later. All that then remains is to hook the appliance into place. • The maintenance-free convector has a power cable (permanent connection) with FIL-pilot control core. • Safety • The programming unit is equipped with an adjustable childprooﬁng facility to prevent unintentional or unauthorised adjustments. • Integral high limit safety cut-out.CNS-U 500 Plus LCD (UK) CNS-U 500 Plus LCD (UK) CNS-U 750 Plus LCD (UK) CNS-U 1000 Plus LCD (UK) CNS-U 1500 Plus LCD (UK)Part number 205867 205868 205869 205870Price excl. VAT £ 166.00 170.00 176.00 197.00 Specification Power supply 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 VRated voltage V 240 240 240 240Rated current A 2,1 3,1 4,2 6,3Connected load W 500 750 1000 1500Connected load kW 0,5 0,75 1,0 1,5Setting range °C 5-30 5-30 5-30 5-30IP rating IP24 IP24 IP24 IP24Protection class I I I IHeight mm 450 450 450 450Width mm 348 426 426 582Depth mm 100 100 100 100Weight kg 4.00 4.60 4.60 6.00Colour signal white, RAL 9003 signal white, RAL 9003 signal white, RAL 9003 signal white, RAL 9003 CNS-U 2000 Plus LCD (UK) CNS-U 2500 Plus LCD (UK) CNS-U 3000 Plus LCD (UK)Part number 205871 205872 205873Price excl. VAT £ 204.00 232.00 240.00

Page 248

Page 249

ConvectorsWall installation249Product information 2025 - Subject to technical modiﬁcations.CNS Trend UKBeneﬁts › Wall mounted convector heaters with high heating output › Compact metal casing in a slimline design › Permanent connection with FIL-pilot control cable › Electronic controller with illuminated LCD screen › Weekly timer with 3 time programs, self-learning function and open window detection › In timer mode, the self-learning control unit calculates the preheating time automatically › Safety through overheating protection › Omnipolar operating selector › Long lasting stainless steel tubular heater with steel ﬁns › During a power failure, the clock is buffered for up to 10 hoursApplication • This compact wall mounted convector is suitable as a standalone heater, as an efﬁcient interim heater in spring/autumn and for additional heat demand in the living space, bathroom or study. • The appliance can be integrated into systems with central FIL-pilot control. • The timeless and very slimline design suits any setting.Convenience features • The indoor air is heated evenly and silently by the electronically controlled convector with easy-to-read display and simple programming. • The required room temperature is easy to set at the programming unit. • The convector can be adjusted to suit individual needs. For this, a programmable weekly timer is integrated with two preset time programs and one customisable time program. • In timer mode, the comfort temperature is achieved at precisely the right time thanks to adaptive control with learning function. • Comfort temperature and setback temperature are programmable. • The user can activate an application that detects open windows. • The ap-pliance has a frost protection setting. • The convector has an omnipolar operating selector. • The high grade stainless steel tubular heater with aluminium coated steel ﬁns is integrated in a robust metal casing.Installation • Straightforward, stable wall mounting needs one person only: the wall mounting bracket is ﬁtted to the wall separately from the appliance and can be readjusted later. All that then remains is to hook the appliance into place. • The maintenance-free convector has a power cable (permanent connection) with FIL-pilot control core. • Safety • The programming unit is equipped with an adjustable childprooﬁng facility to prevent unintentional or unauthorised adjustments. • Integral high limit safety cut-out.CNS 50 Trend UK CNS 50 Trend UK CNS 75 Trend UK CNS 100 Trend UK CNS 150 Trend UK CNS 250 Trend UKPart number 236559 236560 236561 236562 236564Price excl. VAT £ 166.00 170.00 177.00 197.00 232.00 Specification Power supply 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 VRated voltage V 240 240 240 240 240Rated current A 2,1 3,1 4,2 6,3 10,4Connected load W 500 750 1000 1500 2500Connected load kW 0,5 0,75 1,0 1,5 2,5Setting range °C 5-30 5-30 5-30 5-30 5-30IP rating IP24 IP24 IP24 IP24 IP24Protection class I I I I IHeight mm 450 450 450 450 450Width mm 348 426 426 582 894Depth mm 100 100 100 100 100Weight kg 4.00 4.60 4.60 6.00 9.20Colour alpine white alpine white alpine white alpine white alpine white Depth including wall mounting bracket

Page 250

ConvectorsWall installation250Product information 2025 - Subject to technical modiﬁcations.CNS Trend NCBeneﬁts › Wall mounted convector with electronic open-loop control and illuminated LCD screen › Integral room control, speciﬁcally for guest rooms in hotels, B&Bs and student accommodation › Long lasting stainless steel tubular heater with steel ﬁns › Safety through overheating protection › In timer mode, the self-learning control unit calculates the preheating time automatically › During a power failure, the clock is buffered for up to 10 hours › Weekly timer with 3 time programs, self-learning function and open window detection › Service tool for programmed operation requiredApplication • This compact wall mounted convector is suitable as a standalone heater for living spaces. • The ap-pliance has been developed for guest rooms in hotels and B&Bs or for student accommodation. The wall mounted convector can be conﬁgured to always work in the most cost effective way for the user. A service tool (to be ordered separately) is required to program the appliance.Convenience features • The convector with electronic open-loop control, illuminated display and easy programming ensures even distribution of heat in the room. • The appliance can be operated individually. A weekly time switch with two preset and one individual time program and an adaptive self-learning function is integrated. • The integral special room control mode combines efﬁciency and convenience. In this operating mode, the set values for comfort setback and frost protection, as well as the respective time spans, are permanently programmed in the unit. When the programmed time for the comfort temperature has elapsed, the appliance switches automatically to setback mode. • If the room is not being used for an extended length of time, the appliance can switch automatically to frost protection mode. • Users can change the speciﬁed temperature easily by using the two control buttons. The operating parameters can only be set up, activated or changed using the separate service tool for the CNS Trend NC. • Integral overheating protection.Efﬁciency • If required, the convector can detect open windows. It then switches automatically to frost protection mode, thereby saving energy. • The appliance is equipped with a high quality stainless steel tubular heater with aluminium coated ﬁns.CNS 50 Trend NC CNS 50 Trend NC CNS 75 Trend NC CNS 100 Trend NC CNS 150 Trend NC CNS 200 Trend NCPart number 202001 202002 202003 202004 202005Price excl. VAT £ 166.00 170.00 177.00 197.00 204.00 Specification Power supply 1/N/PE ~ 240 V 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 VRated voltage V 240 240 240 240 240Rated current A 2,1 3,1 4,2 6,3 8,3Connected load W 500 750 1000 1500 2000Connected load kW 0,5 0,75 1 1,5 2Setting range °C 5-30 5-30 5-30 5-30 5-30IP rating IP24 IP24 IP24 IP24 IP24Protection class I I I I IHeight mm 450 450 450 450 450Width mm 348 426 426 582 738Depth mm 100 100 100 100 100Weight kg 4.00 4.60 4.60 6.00 7.70Colour alpine white alpine white alpine white alpine white alpine white Required accessories Part number 203981 203981 203981 203981 203981Type Service tool CNS Service tool CNS Service tool CNS Service tool CNS Service tool CNSDescription Service tool for the CNS Trend NC series for configuring Room Control modeService tool for the CNS Trend NC series for configuring Room Control modeService tool for the CNS Trend NC series for configuring Room Control modeService tool for the CNS Trend NC series for configuring Room Control modeService tool for the CNS Trend NC series for configuring Room Control modePrice excl. VAT £ 789.00 789.00 789.00 789.00 789.00 Depth including wall mounting bracket

Page 251

Convectors Floorstanding appliancesConvectorsFloorstanding appliances251Product information 2025 - Subject to technical modiﬁcations.CNS 2000 Plus LCD moveBeneﬁts › Elegant freestanding convector with a timeless casing design › High heating output despite slimline design › Highly safe due to pendulum switch which switches the appliance off if knocked over › Electronic controller with illuminated LCD screen › Integral handle › Long lasting stainless steel tubular heater with steel ﬁns › Colour: white (similar to RAL 9003) (Product: 207061) › Colour: black (Product: 207069)Application • This electronically controlled freestanding convector is characterised by its elegant design casing, which blends in perfectly with any living space. The appliance is easy to program and versatile to use, for example as a booster heater or in recreational rooms that are only used sporadically. • Thanks to the high heating output, the required heat is available quickly. • The appliances are available in different colours for optimum integration into the living space.Convenience features • Thanks to its sophisticated and timelessly elegant design, the freestanding convector ﬁts into any living space seamlessly. • The operating controls are integrated into the top and are easily accessible. It is simple to set your required room temperature. A large and easy-to-read display shows information about the most important settings. The programming unit can be locked to prevent unintentional changes. • A weekly time switch with two preset time programs and one individual time program is integrated. The time switch has adaptive control as a learning function for reaching the comfort temperature at exactly the right time in timer mode. • The comfort and setback temperatures can be programmed to suit individual needs. • The convector detects open windows. • The freestanding convector has a high quality, stainless steel tubular heater with steel ﬁns in a robust metal casing.Installation • The appliance is delivered complete with a power cable with ﬁtted standard plug. It is equipped with stable feet; a handle makes it easy to move around. • The frost protection setting prevents frost damage at low temperatures.Safety • The freestanding convector offers the greatest possible operational reliability thanks to the built-in pendulum switch, as it switches off automatically if it is tipped over. • The integral safety temperature limiter protects against overheating.CNS 2000 Plus LCD Move (UK) CNS 2000 Plus LCD Move (UK) CNS-B 2000 Plus LCD Move (UK) NEW NEWPart number 207061 207069Price excl. VAT £ 204.00 204.00 Specification Power supply 1/N/PE ~240 V 1/N/PE ~240 VRated voltage V 240 240Rated current A 8,3 8,3Connected load W 2000 2000Connected load kW 2 2Setting range °C 5-30 5-30IP rating IP24 IP24Protection class I IHeight mm 443 443Width mm 738 738Depth mm 80 80Weight kg 7.90 7.90Colour white (similar to RAL 9003) black Depth and height including feet with castors (Product: 207061, 207069)

Page 252

Page 253

Page 254

Duo convectors Wall installationDuo convectorsWall installation254Product information 2025 - Subject to technical modiﬁcations.CNDBeneﬁts › Modern and high grade design › Two heating systems for radiant and convection heating in a single appliance › Electronic controller with illuminated LCD screen › Intelligent energy saving functions › Integral RT controller with weekly timer and open window detection › Automatic setback of the set temperature when windows are open or rooms are not used › Consumption indicator › Permanent connection with FIL-pilot control cableApplication • This high quality duo convector can be used as a standalone heater, as an efﬁcient interim heater in spring/autumn, or for additional heat demand in the living space, bathroom or study. • The appliance is wall mount-ed. • Two integral heaters for radiant heat and convection work together to ensure a pleasant room temperature. • The elegant and minimalist design suits any modern setting. • The convector can be integrated into systems with central FIL-pilot control.Convenience features • In addition to the two heating systems for radiant heat and convection, the design convector also features precise electronic closed-loop control with intelligent energy saving functions. • The appliance switches automatically to frost protection mode when a window is open. • The motion sensor detects if there is no longer anyone in the room. The set room temperature is then automatically lowered. • The weekly timer offers three preset time programs which can be individually adapted. • Very user friendly operation is ensured thanks to the top mounted user interface and easy-to-read display. The programming unit has an adjustable childprooﬁng facility to prevent unintentional or unauthorised adjustments.Installation • The power cable has a FIL-pilot control core and is prewired for permanent connection. • Only one person is required for the installation as the wall mounting bracket is ﬁtted to the wall separately from the appliance and can be readjusted later. The appliance simply needs to be hooked into place. • The maintenance-free convector has an omnipolar operating selector.Safety • The appliance has an integral high limit safety cut-out.CND 75 CND 75 CND 100 CND 150 CND 200Part number 234813 234814 234815 234816Price excl. VAT £ 341.00 401.00 464.00 512.00 Specification Power supply 1/N ~ 230 V 1/N ~ 230 V 1/N ~ 230 V 1/N ~ 230 VRated voltage V 230 230 230 230Rated current A 3,3 4,3 6,5 8,7Connected load W 750 1000 1500 2000Connected load kW 0,75 1 1,5 2Setting range °C 10 - 30 10 - 30 10 - 30 10 - 30IP rating IP24 IP24 IP24 IP24Protection class II II II IIHeight mm 504 504 504 504Width mm 675 790 1010 1240Depth mm 120 120 120 120Weight kg 6.70 7.70 9.70 11.50Colour white white white white Depth including wall mounting bracket

Page 255

Page 256

Accessories for convectors AccessoriesAccessories for convectorsAccessories256Product information 2025 - Subject to technical modiﬁcations.Service tool CNSBeneﬁts › Service tool for programming the integral room control system of a wall mounted convector according to requirements › Can be individually matched to the needs of hotels, student accommodation and other accommodation facilities › Temperatures can be speciﬁed for boost, setback mode and frost protection › 2 programmable timers for comfort and setback modes › Simple and intuitive operation › Programming transferred via data cable › Battery runtime display › Charging via micro-USBDescription • STIEBEL ELTRON wall mounted convectors can be programmed with the battery-operated service tool. Compatible appliances can be recognised at the interface on the appliance programming unit. • The service tool transmits the required conﬁguration via a data cable to the room control system for the convectors.Convenience features • The service tool enables the set temperatures for the boost, setback and frost modes of the wall mounted convectors to be individually programmed as required. Two timers are integrated for this purpose: the boost timer deﬁnes the period of time during which the appliance heats to the comfort temperature. After this, setback mode is activated automatically. The eco timer speciﬁes for how long the appliance is heated to setback temperature. After this, frost protection is activated automatically. • The service tool is intuitive and easy to use: the battery-operated device has a touchscreen that can be operated either with the supplied stylus or your ﬁngers. Entries are made intuitively using menus and on-screen keyboards. • The required conﬁguration is simply transmitted to the convector via the supplied data cable, for example by the caretaker in student accommodation. • The battery charge status is shown on the display. There is an integral micro USB socket for charging it.Service tool CNS Service tool CNSPart number 203981Price excl. VAT £ 789.00 Specification IP rating otherLength m 0,19Length mm 190Height mm 60Width mm 80Depth mm 60Weight kg 1.25Casing material PlasticAPPLICATION: For conﬁguring the CNS Trend NC for using room control mode.  (Product: 203981) Service tool for CNS Trend NC (Product: 203981)

Page 257

Page 258

Page 259

Page 260

Rapid heater Rapid heaterRapid heaterRapid heater260Product information 2025 - Subject to technical modiﬁcations.CK PremiumBeneﬁts › Elegant design with aluminium front › Electronic controller with illuminated LCD screen › Silent mode with a quiet heating stage and powerful rapid heat-up stage › Weekly timer with 3 time programs, self-learning function and open window detection › With short-time timer › Safety through overheating protection › Omnipolar operating selectorApplication • This high quality rapid heater is suitable as a standalone heater or as a booster heater, particularly for rooms that are not heated constantly. • The wall mounted appliance heats the indoor air quickly and evenly. • The design has won the Red Dot Design Award; the appliance suits any setting.Convenience features • The premium rapid heater with electronic closed-loop control is equipped with a large, easy-to-read display. The required room temperature can be easily adjusted at the top-mounted programming unit. • In addition to the programmable weekly timer, there are two preset and one individually programmable time programs available. • In addition to the comfort temperature, the setback temperature can also be programmed. In timer mode, the comfort temperature is achieved at precisely the right time thanks to the adaptive control with learning function. • Quiet operation in Silent Mode which features a switchable heating stage and reduced fan speed. • The elegant appliance is equipped with an aluminium front and has an integral frost protection setting.Efﬁciency • To prevent unnecessary energy losses, users can activate a function that detects open windows.Installation • Straightforward, stable wall mounting by just one person because the wall mounting bracket is ﬁtted separately from the appliance and can be adjusted afterwards. All that then remains is to hook the maintenance-free appliance into place.Safety • Integral childprooﬁng as the programming unit can be locked. • The rapid heater has an integral safety temperature limiter.CK 20 Premium CK 20 PremiumPart number 237835Price excl. VAT £ 226.00 Specification Power supply 1/N/PE ~ 230 VRated voltage V 230Rated current A 8,7Connected load W 2000Connected load kW 2Sound pressure level dB(A) 37/48Setting range °C 5-30IP rating IP24Protection class IHeight mm 470Width mm 345Depth mm 126Weight kg 5.30Colour alpine white Depth including wall mounting bracket

Page 261

Rapid heaterRapid heater261Product information 2025 - Subject to technical modiﬁcations.CK Trend LCDBeneﬁts › Compact appliance in a plastic casing › Electronic controller with illuminated LCD screen › Weekly timer with 3 time programs, self-learning function and open window detection › During a power failure, the clock is buffered for up to 10 hours › Very high safety thanks to 3-stage overheating protection › Fluff ﬁlter in the air intake › Cable storage at the back for the connecting cable › Very quiet operationApplication • This rapid heater is suitable as a standalone heater in the bathroom. The appliance can also be used as an efﬁcient interim heater in spring/autumn and as a booster heater, for example in a guest room or recreational room. • Thanks to its compact design, the rapid heater does not take up much space. • The appliance is designed for wall mounting and heats the indoor air quickly and evenly.Convenience features • The rapid heater with electronic closed-loop control is equipped with a large, easy-to-read display. • The required room temperature can be easily adjusted at the top-mounted programming unit. • In addition to the programmable weekly timer, there are two preset and one individually programmable time programs available. • In addition to the comfort temperature, the setback temperature is also programmable. The comfort temperature is reached at exactly the right time in timer mode. Adaptive control with a learning function is integrated for this purpose. • If required, users are able to activate a function which detects when windows are open; this avoids un-necessary energy loss. • The rapid heater has an integral ﬂuff ﬁlter. • The casing is made from hard-wearing plastic.Efﬁciency • The high quality self-limiting ceramic heating element keeps the temperature constant to save energy.Installation • Stable wall mounting is possible with one person only: the wall mounting bracket is ﬁtted to the wall separately from the appliance and can be readjusted later. The appliance is then simply hooked into place. • The power cable is ﬁtted with a right angle plug as standard (not for GB). Any excess cable can be housed in the cable storage compartment on the back panel.Safety • Integral childprooﬁng as the programming unit can be locked. • The 3-stage safety concept includes the self-limiting ceramic heating element, the safety temperature limiter and the built-in fuse.CK 20 Trend LCD CK 20 Trend LCDPart number 236653Price excl. VAT £ 151.00 Specification Power supply 1/N ~ 230 VRated voltage V ~230Rated current A 8,7Connected load W 2000Connected load kW 2Sound pressure level dB(A) 49Setting range °C 5-30IP rating IP24Protection class IIHeight mm 400Width mm 275Depth mm 131Weight kg 2.50Colour alpine white Depth including wall mounting bracket

Page 262

Bathroom radiator Towel railsBathroom radiatorTowel rails262Product information 2025 - Subject to technical modiﬁcations.BHE PlusBeneﬁts › Wall mounted towel rails › Factory-ﬁlled with heat transfer medium for purely electric operation › Can also be connected to the hot water heating network › Electronic controller with illuminated LCD screen › Weekly timer with self-learning function › Boost function for quick heat-up › Pre-installed, electric direct immersion heater › Very safe thanks to high limit safety cut-out › Integral rapid heater (Product: 238715)Application • This well-ﬁnished bathroom radiator can be used either as a purely electrical appliance or can be connected to the hot water central heating system. In both operating modes, the radiator is optimally suited to warming and drying towels, as an interim heater in spring/autumn or as a booster heater. Towels can easily be hung at multiple levels.Convenience features • The appliances are simple and convenient to operate via an easily accessible electronic controller. The required room temperature is easy to set at the programming unit. • The programmable weekly timer with adaptive control as a learning function ensures the comfort temperature can be easily and conveniently achieved at exactly the right time. When there is a higher heat demand, a boost function is available for fast heating at full output. The duration of the boost function can be adjusted. • The setback temperature can be programmed. • A version with an integral rapid heater is available for heating the room quickly. The rapid heater can be activated for the preselected heating time.Installation • The appliance is ﬁlled with a heat transfer medium ready for installation. • Ready for connection with power cable.Safety • Integral high limit safety cut-out.BHE 50 Plus BHE 50 Plus BHE 75 Plus BHE 100 Plus BHE 175 T PlusPart number 239141 238713 238714 238715Price excl. VAT £ 390.00 520.00 627.00 677.00 Specification Power supply 1/N ~ 230 V 1/N ~ 230 V 1/N ~ 230 V 1/N ~ 230 VRated voltage V 230 230 230 230Rated current A 2.2 3.3 4.4 7.6Rated output W 500 750 1000 1750Connected load W 500 750 1000 1750Heating output to EN 442 (75/65 – 20 °C)W 367 571 876 571Heating output F/R – T (70/55 – 24 °C)W 125 194 298 194Setting range °C 10-28 10-28 10-28 10-28IP rating IP24 IP24 IP24 IP24Protection class II II II IINumber of ribs 20 30 37 30Height mm 1090 1590 1830 1590Width mm 500 500 550 500Depth mm 117 117 117 130Weight kg 12.00 19.00 23.00 20.00Colour traffic white, RAL 9016 traffic white, RAL 9016 traffic white, RAL 9016 traffic white, RAL 9016 Depth including wall mounting bracket

Page 263

Infrared wall mounted radiant heater IndoorInfrared wall mounted radiant heaterIndoor263Product information 2025 - Subject to technical modiﬁcations.IWBeneﬁts › Full metal casing › Pull-cord activation › Display shows the switching position in the indicator windowApplication • This radiant heater is suitable for heating small rooms. The appliance gives off noticeable warmth immediately without any air movement. It is particularly suitable for bathrooms, recreational rooms or wind-shel-tered, covered verandas.Convenience features • The pivoting highly polished reﬂector is equipped with quartz heater rods. It is operated by a pull cord.Installation • Easy wall mounting with direct electrical connection.IW 120 IW 120Part number 229339Price excl. VAT £ 66.00 Specification Power supply 1/N/PE ~ 230 VRated voltage V 230Rated current A 5.2Rated output kW 1.2Connected load W 1200Number of heating stages 3IP rating IPX4Protection class I to EN 60335Height mm 145Width mm 535Depth mm 85Weight kg 1.55Colour silverInstallation type Indoor/outdoor installation

Page 264

Page 265

Page 266

Page 267

Page 268

Hand dryer, high speed High speedHand dryer, high speedHigh speed268Product information 2025 - Subject to technical modiﬁcations.ULTRONIC PremiumBeneﬁts › Extremely short hand drying time of less than 12 seconds › Robust, impact-resistant casing made of brushed stainless steel › Integral indoor air puriﬁer with UV-C lamp and ion generator › With HEPA ﬁlter for hygienic hand drying with clean air › Add-on heating element for pleasant hand drying › Silent mode with reduced fan speed › Hygienic and energy efﬁcient through IR proximity sensors › Maintenance-free thanks to brushless motor › Very long service life › Energy efﬁcient and environmentally responsible › Brushed stainless steel casing (Product: 205633)Application • This high quality, electric high speed hand dryer is distinguished by its particularly short drying time. The appliance dries hands by removing the moisture with a concentrated jet of air. • The hand dryer is ideally suited to the special demands made on washroom facilities in restaurants, commerce and public buildings.Convenience features • Operation is contactless due to the integral infrared proximity sensors. • Additional hygiene is provided by the HEPA ﬁlter and the air puriﬁcation function by UV-C light and ion generator. The appliance reliably removes dust, pollen, bacteria and viruses from the indoor air. The air puriﬁcation function works cyclically, run-ning for 1 h and being off for 1 h. • A switchable heating element increases comfort when drying hands. • Optimally suited to sanitary facilities in schools and ofﬁces thanks to silent mode. The particularly low connected load enables energy efﬁcient and environmentally responsible operation. • The robust and impact-resistant casing is made from brushed stainless steel.Installation • Easy installation due to separate mounting plate.ULTRONIC Premium ULTRONIC PremiumPart number 205633Price excl. VAT £ 364.00 Specification Power supply 1/N/PE ~ 220-240 VRated voltage V 230Frequency Hz 50/60Rated current A 3,1Rated output W 720Operating noise dB(A) 76Air speed m/s 96Air flow rate m³/h 84Drying time s 12IP rating IP23Protection class IHeight mm 309Width mm 272Depth mm 132Weight kg 4.00Casing material Stainless steelColour Stainless steel

Page 269

Hand dryer, high speedHigh speed269Product information 2025 - Subject to technical modiﬁcations.ULTRONIC PlusBeneﬁts › Extremely short hand drying time of less than 12 seconds › Robust, impact-resistant plastic casing › Integral indoor air puriﬁer with UV-C lamp and ion generator › With HEPA ﬁlter for hygienic hand drying with clean air › Add-on heating element for pleasant hand drying › Silent mode with reduced fan speed › Hygienic and energy efﬁcient through IR proximity sensors › Maintenance-free thanks to brushless motor › Very long service life › Energy efﬁcient and environmentally responsible › Casing made of impact-resistant plastic (Product: 205632)Application • This high quality, electric high speed hand dryer is distinguished by its particularly short drying time. The appliance dries hands by removing the moisture with a concentrated jet of air. • The hand dryer is ideally suited to the special demands made on washroom facilities in restaurants, commerce and public buildings.Convenience features • Operation is contactless due to the integral infrared proximity sensors. • Additional hygiene is provided by the HEPA ﬁlter and the air puriﬁcation function by UV-C light and ion generator. The appliance reliably re-moves dust, pollen, bacteria and viruses from the indoor air. The air puriﬁcation function works cyclically, running for 1 h and being off for 1 h.• A switchable heating element increases your comfort during hand drying. • Optimally suited to sanitary facilities in schools and ofﬁces thanks to silent mode. The particularly low connected load enables energy efﬁcient and environmentally responsible operation. • The robust and impact-resistant casing is made from plastic.Installation • Easy installation due to separate mounting plate. ULTRONIC Plus ULTRONIC PlusPart number 205632Price excl. VAT £ 311.00 Specification Power supply 1/N/PE ~ 220-240 VRated voltage V 230Frequency Hz 50/60Rated current A 3,1Rated output W 720Operating noise dB(A) 76Air speed m/s 96Air flow rate m³/h 84Drying time s 12IP rating IP23Protection class IHeight mm 309Width mm 272Depth mm 132Weight kg 2.80Casing material PlasticColour signal white, RAL 9003