Return to flip book view

Table of contentsTable of contents Complete table of con-tentsComplete table of contents1Domestic hot water › Comfort instantaneous water heaters18 › Compact instantaneous water heaters, 1-phase24 › Mini instantaneous water heaters30 › Taps for instantaneous water heaters34 › Accessories for instantaneous water heaters36 › Automatic water boilers40 › Small water heaters, non-pressurised44 › Accessories for small water heaters and DHW cylinders, non-pressurised54 › Small water heaters, pressurised58 › Accessories for small water heaters, pressurised64 › Wall mounted cylinder68 › Floor mounted cylinder72 › Accessories for floor mounted cylinders, pressurised74 › Compact DHW heat pumps82 › DHW heat pump accessories84 Heat pumps › Air source heat pumps, outdoor installation – inverter90 › Accessories for air source heat pumps installed outdoors114 › Ground source heat pumps – inverter120 › Accessories for ground source heat pumps130 › Control units138 › Hydraulic modules152 › Accessories for hydraulic modules154 › Integral cylinder156 › Accessories for integral cylinders164 › DHW cylinder168 › Accessories for DHW cylinders172 › Instantaneous water cylinders174 › Accessories for instantaneous water cylinders176 › Buffer cylinder178 › Accessories for buffer cylinders182 › Additional accessories186 › Heat pump accessories190 Ventilation › Decentralised ventilation in residential buildings202 › Accessories for decentralised ventilation in residential buildings208 Room heating › Storage heater216 › Accessories for storage heaters222 › Convectors230 › Duo convectors240 › Accessories for convectors242 › Rapid heater246 › Bathroom radiator248 › Infrared wall mounted radiant heater249 Hand dryer › Hand dryer, high speed254Product information 2024 - Subject to technical modifications.1

Product information 2024 - Subject to technical modifications.2

Table of contentsTable of contents ContentComplete table of contents1Tables of contents 1DHW cylinder 44Ground source and water source heat pumps 120Storage heater 216Instantaneous water heater 18DHW heat pumps 82Accessories for heat pumps and cylinders 138Direct heating 230Water boilers 40Air source heat pumps 90Decentralised ventilation 202Hand dryer 254Product information 2024 - Subject to technical modifications.3

Table of contentsAlphabetic directoryTable of contents Alphabetic directoryType Mat. no. Price PageA AS-HM Trend 233750 165.00 £ 154AS-WP 2 233623 111.00 £ 114B BBI 5-I 205877 148.00 £ 182BGC 6 kW 500 mm ET 003769 261.00 £ 74, 84, 186BGC/45 075115 274.00 £ 74, 84, 186BHE 100 Plus 238714 614.00 £ 248BHE 175 T Plus 238715 663.00 £ 248BHE 50 Plus 239141 382.00 £ 248BHE 75 Plus 238713 509.00 £ 248BSW 230 200166 13.00 £ 223C CDT 180 204642 290.00 £ 165CK 20 Premium 237835 221.00 £ 246CK 20 trend LCD 236653 148.00 £ 247CND 100 234814 393.00 £ 240CND 150 234815 454.00 £ 240CND 200 234816 501.00 £ 240CND 75 234813 334.00 £ 240lCNS 100 Connect UK 205641 232.00 £ 231CNS 100 Trend NC 202003 173.00 £ 237nCNS 100 Trend UK 236561 173.00 £ 235lCNS 150 Connect UK 205642 262.00 £ 231CNS 150 Trend NC 202004 193.00 £ 237nCNS 150 Trend UK 236562 193.00 £ 235lCNS 200 Connect UK 205643 269.00 £ 232CNS 200 Trend NC 202005 200.00 £ 237nCNS 200 Trend UK 236563 200.00 £ 235lCNS 250 Connect UK 205644 308.00 £ 232nCNS 250 Trend UK 236564 227.00 £ 235lCNS 300 Connect UK 205645 318.00 £ 232nCNS 300 Trend UK 236565 235.00 £ 235lCNS 50 Connect UK 205639 218.00 £ 231CNS 50 Trend NC 202001 162.00 £ 237nCNS 50 Trend UK 236559 162.00 £ 235lCNS 75 Connect UK 205640 225.00 £ 231CNS 75 Trend NC 202002 166.00 £ 237nCNS 75 Trend UK 236560 166.00 £ 235lCNS-U 1000 Plus LCD (UK) 205869 172.00 £ 233lCNS-U 1500 Plus LCD (UK) 205870 193.00 £ 233lCNS-U 2000 Plus LCD (UK) 205871 200.00 £ 233lCNS-U 2500 Plus LCD (UK) 205872 227.00 £ 233lCNS-U 3000 Plus LCD (UK) 205873 235.00 £ 233lCNS-U 500 Plus LCD (UK) 205867 162.00 £ 233lCNS-U 750 Plus LCD (UK) 205868 166.00 £ 233nCON 10 Premium U 200268 261.00 £ 230nCON 15 Premium U 200269 267.00 £ 230nCON 20 Premium U 200270 274.00 £ 230nCON 30 Premium U 200276 368.00 £ 230nCON 5 Premium U 201278 253.00 £ 230D DCE-S 10/12 Plus 238154 393.00 £ 26DCE-S 6/8 Plus 238153 369.00 £ 26DCE-X 10/12 Premium 238159 442.00 £ 24DCE-X 6/8 Premium 238158 419.00 £ 24DEM 3 Set 236584 301.00 £ 30DEM 4 Set 236462 301.00 £ 30DEM 6 Set 236463 301.00 £ 30DHB-E 18/21/24 Set 203866 627.00 £ 20Type Mat. no. Price PageDHB-E 27 LCD Set 203865 640.00 £ 20DHE 18/21/24 Set 204284 970.00 £ 18DHE 27 Set 204285 985.00 £ 18E EAD 237742 21.00 £ 149EFS 237740 27.00 £ 145EHF 237736 278.00 £ 144EIL 237744 53.00 £ 148EIW 237745 73.00 £ 148EM 33-87 201715 461.00 £ 132EMW 202062 563.00 £ 132ERE 237743 106.00 £ 147ERS 237741 111.00 £ 146ERT 237738 63.00 £ 145ESH 120 F Trend GB 204791 698.00 £ 72ESH 150 F Trend GB 204792 837.00 £ 72ESH 180 F Trend GB 204793 872.00 £ 72ESH 210 F Trend GB 204794 911.00 £ 72ESH 250 F Trend GB 204795 991.00 £ 72ESH 300 F Trend GB 204796 1,080.00 £ 72ESS 237739 648.00 £ 144ET SBP 003711 69.00 £ 183EZE 237737 220.00 £ 143F FCR 21/120 071331 958.00 £ 74, 186FCR 21/60 071330 1,011.00 £ 74, 186FCR 28/120 E 000694 1,083.00 £ 74, 186FCR 28/180 E 000695 1,095.00 £ 74, 186FE 7 185579 79.00 £ 141FEG 201767 222.00 £ 133FET 234723 248.00 £ 141FEW 202099 345.00 £ 134FS-WP 22 233511 76.00 £ 131FS-WP 28 233512 131.00 £ 131FSHP-L45 202779 658.00 £ 196H HG Set 33-87 201716 547.00 £ 133HMS Trend 233826 2,722.00 £ 152HOT 2.6 N 1600 Premium + 3in1 N3 c 203882 545.00 £ 40HOT 2.6 N 1600 Premium + 3in1 N4 b 203883 638.00 £ 40lHPA-O 8 CS Plus int 239171 3,350.00 £ 109lHPA-O 8 CS Plus int Compact Set 206043 8,195.00 £ 108HSBB 180 S Plus (GB) Set 204552 3,110.00 £ 161HSBC 180 S Plus (GB) Set 204551 4,789.00 £ 158HSBC 200 S (GB) Set 236917 3,650.00 £ 157lHSBC 220 206641 3,650.00 £ 160lHSBC 225 S 1 206045 3,650.00 £ 159HSBC 3-HKM 238825 593.00 £ 164HSBC 300 cool (GB) Set 204651 5,630.00 £ 156HSBC-HKM 234648 600.00 £ 164HUK 100 Set 203711 1,944.00 £ 195HUK 125 Set 203712 2,034.00 £ 195HUK 150 Set 203713 3,619.00 £ 195HUK 200 Set 203714 4,248.00 £ 195HUV 1 227420 340.00 £ 195HUV 2 223391 752.00 £ 195I ISG web 229336 871.00 £ 140IW 120 229339 64.00 £ 249Product information 2024 - Subject to technical modifications.4

Table of contentsAlphabetic directory1Type Mat. no. Price PageL lLA 100 A 205771 204lLA 100 G-A 205906 205lLA 100 VE 205907 206lLWF W 100 VA - 60 231104 206M lMAE-K 205616 75.00 £ 55MAG 12 235218 67.00 £ 131MAG 18 235219 75.00 £ 131MAG 25 235220 89.00 £ 131MAG 50 235221 134.00 £ 131lMAZ 205621 98.00 £ 34R RBS-SBC 238827 278.00 £ 164S SBB 300-1 Plus GB 202923 1,459.00 £ 169SBB 302 WP (GB) Set 228945 2,456.00 £ 168SBB 400-1 Plus GB 202924 1,526.00 £ 169SBB 401 WP SOL (GB) Set 228946 2,722.00 £ 168SBB 500-1 Plus GB 202925 1,881.00 £ 169SBB 501 WP SOL (GB) Set 228947 2,986.00 £ 168SBP 100 Plus 206279 525.00 £ 178SBP 1000 E 227564 1,933.00 £ 179SBP 1000 E SOL 227566 2,046.00 £ 179SBP 1500 E 227565 2,032.00 £ 179SBP 1500 E SOL 227567 2,999.00 £ 179SBS 1001 W Set 236483 3,782.00 £ 174SBS 1501 W Set 236484 4,776.00 £ 174SBS 601 W Set 236481 2,986.00 £ 174SBS 801 W Set 236482 3,384.00 £ 174SH 15 SL GB Set AX 227692 433.00 £ 61nSHC 10 GB Eltron 235232 274.00 £ 58nSHC 15 GB 234407 315.00 £ 58SHF 2000 200175 660.00 £ 216SHF 3000 200176 710.00 £ 216SHF 4000 200177 782.00 £ 216SHF 5000 200178 842.00 £ 216SHF 6000 200179 947.00 £ 216SHF 7000 200180 1,060.00 £ 216SHS 1200 200181 708.00 £ 218SHS 1800 200182 728.00 £ 218SHS 2400 200183 788.00 £ 218SHS 3000 200184 842.00 £ 218SHS 3600 200185 895.00 £ 219SHS 4200 200186 967.00 £ 219SHS 4800 200187 1,022.00 £ 219SHU 10 SL GB Set AX 227689 381.00 £ 62SHU 5 SL GB Set AX 227687 340.00 £ 60SHZ 100 S (GB) 232786 1,129.00 £ 68SHZ 150 S (GB) 232788 1,235.00 £ 68SHZ 30 S (GB) 232783 1,050.00 £ 68SHZ 50 S (GB) 232784 1,090.00 £ 68SK 2 236693 102.00 £ 115SN 15 SL GB 227682 301.00 £ 51SNE 5 t ECO GB 202135 197.00 £ 44SNO 10 Plus (GB) 204984 235.00 £ 50SNO 5 Plus (GB) 204979 176.00 £ 50SNU 10 Plus (GB) 204981 201.00 £ 34SNU 10 Plus GB + WST-W 205849 324.00 £ 49SNU 5 Plus (GB) 204971 189.00 £ 46Type Mat. no. Price PageSNU 5 Plus GB + WST-W 205848 309.00 £ 48lSP VLR 70 RF COARSE 30 G2-4 239562 12.00 £ 210lSP VLR 70 RF COARSE 60 G4-4 239575 28.50 £ 210lSP VLR 70 RF EPM1 50 F7-4 239577 35.00 £ 210lSP VLR 70 RF EPM1 80 F9-4 201274 32.00 £ 210lSP VLR 70 RF EPM10 50 M5-4 239576 32.00 £ 211STB-FB 233711 42.00 £ 197STH 210 Plus 203763 911.00 £ 178STH 415 Plus 203764 1,103.00 £ 178STH 720 Plus 203765 1,785.00 £ 178STH 720-1 Plus 203766 1,986.00 £ 178Service tool CNS 203981 773.00 £ 242T TAF PT 2m 235996 30.00 £ 134, 142lTWS-W 205613 75.00 £ 55U UBS-RL 238490 480.00 £ 176UBS-VL 238489 474.00 £ 176ULTRONIC Plus 205632 304.00 £ 255ULTRONIC Premium 205633 356.00 £ 254UP 25-60-180 056899 281.00 £ 190UP 25/1-8 PCV 205285 407.00 £ 191UP 25/7.5 PCV 201620 200.00 £ 191UP 30/1-8 PCV 205286 407.00 £ 191nUP 40/1-8 E 227422 1,449.00 £ 191lUP 40/1-8 E 206633 1,450.00 £ 191nUP 50/1-12 E 227423 1,859.00 £ 191lUP 50/1-12 E 206636 1,850.00 £ 191UP-Kit EU 200016 11.00 £ 36UPF 30/1-8 E 232532 640.00 £ 130UPF 40/1-8 E 227413 1,593.00 £ 130UPF 50/1-12 E 227414 1,991.00 £ 130UPZ 233719 327.00 £ 190UVK (SH/SHC) 236702 201.00 £ 64UVK (SH/SHU/SHC) 236701 201.00 £ 64V lVLR 70 L Trend EU 203133 309.00 £ 202lVLR 70-2 CU 239570 220.00 £ 208lVLR 70-4 CU 239571 229.00 £ 208lVLR 70-8 CU 239572 241.00 £ 208W WDH 1000 SBP 231929 765.00 £ 184WDH 1001 SBS 231927 852.00 £ 176WDH 1500 SBP 231930 878.00 £ 184WDH 1501 SBS 231928 966.00 £ 176WDH 601 SBS 231925 710.00 £ 176WDH 801 SBS 231926 737.00 £ 176WK 1.1 238686 200.00 £ 115WK 2 234722 480.00 £ 114WPE 234725 857.00 £ 138WPE-I 04 HK 230 Premium 202615 8,511.00 £ 125WPE-I 04 HK 230 Premium Pack 204399 13,968.00 £ 123WPE-I 04 HW 230 GB Premium 202637 9,646.00 £ 120WPE-I 04 HW 230 GB Premium Pack 204400 12,257.00 £ 122WPE-I 06 HK 230 Premium 238614 8,614.00 £ 125WPE-I 06 HK 230 Premium Pack 204405 14,071.00 £ 123WPE-I 06 HW 230 GB Premium 202638 9,749.00 £ 120WPE-I 06 HW 230 GB Premium Pack 204406 12,360.00 £ 122WPE-I 08 HK 230 Premium 238615 9,103.00 £ 125WPE-I 08 HK 230 Premium Pack 204402 14,560.00 £ 123Product information 2024 - Subject to technical modifications. 5

Table of contentsAlphabetic directoryType Mat. no. Price PageWPE-I 08 HW 230 GB Premium 202639 10,239.00 £ 120WPE-I 08 HW 230 GB Premium Pack 204401 12,848.00 £ 122WPE-I 12 HK 230 Premium 238616 10,540.00 £ 125WPE-I 12 HK 230 Premium Pack 204407 15,997.00 £ 123WPE-I 12 HW 230 GB Premium 202640 11,676.00 £ 120WPE-I 12 HW 230 GB Premium Pack 204403 14,287.00 £ 122WPE-I 15 HK 230 Premium 238617 12,556.00 £ 125WPE-I 15 HK 230 Premium Pack 204404 16,763.00 £ 123WPE-I 15 HW 230 GB Premium 202641 12,443.00 £ 120WPE-I 15 HW 230 GB Premium Pack 204408 15,052.00 £ 122WPE-I 33 H 400 Premium 201412 22,121.00 £ 127WPE-I 44 H 400 Premium 201413 24,577.00 £ 127WPE-I 59 H 400 Premium 201414 28,265.00 £ 127WPE-I 87 H 400 Premium 201415 33,180.00 £ 127WPKI 5-I 205875 468.00 £ 182WPKI 6-I 205876 274.00 £ 183lWPKI-HK DN 25 206627 572.00 £ 192lWPKI-HKM 230 DN 25 206631 558.00 £ 193lWPKI-HKM 24 DN 32 206628 1,519.00 £ 192lWPKI-HKM 24 DN 40 206632 3,439.00 £ 192lWPKI-HKV 2 206638 301.00 £ 194lWPKI-HKV 3 206637 406.00 £ 194WPL 25 ACS 236643 6,450.00 £ 99lWPL 25 ACS Compact Set 206042 11,350.00 £ 103WPL Plus Pack 1 204911 11,350.00 £ 104WPL Plus Pack 2 204912 13,330.00 £ 105WPL Plus Pack 3 204913 12,228.00 £ 106WPL Plus Pack 4 204914 13,230.00 £ 107WPL-A 07 HK 230 Premium 200123 5,000.00 £ 90lWPL-A 07 HK Premium Compact Set 206044 9,900.00 £ 97WPL-A Premium Pack 7 204906 9,900.00 £ 94WPL-A Premium Pack 8 204907 11,880.00 £ 95WPL-A Premium Pack 9 204908 9,781.00 £ 96WPM 234727 575.00 £ 138WPSF 233307 306.00 £ 130WRV 32 232628 148.00 £ 172WRV 40 232629 267.00 £ 172WST-W parts kit SNU GB 54lWUT-K 205615 124.00 £ 54WWK 302 H Set 236467 3,823.00 £ 82Z lZLA 100-H 205830 205lZLWE CO2 236673 536.00 £ 208lZLWE HUMIDITY 236674 232.00 £ 209ZWSK 182101 33.00 £ 223ZWVK 1 182028 108.00 £ 222ZWVK 2 182102 108.00 £ 222Zhzg. 0,35kW 238723 68.00 £ 222Zhzg. 0,5kW 238724 68.00 £ 222Zhzg. 0,8kW 238725 75.00 £ 222Zhzg. 1,2kW 238727 79.00 £ 222Zhzg. 1,5kW 238728 83.00 £ 222Zhzg. 1,7kW 238915 89.00 £ 222Zhzg. 1kW 238726 75.00 £ 222Product information 2024 - Subject to technical modifications.6

Table of contentsProduct range directoryTable of contents Product range directory1 Comfort instantaneous water heatersFull electronic controlType Mat. no. Price PageDHE 18/21/24 Set 204284 970.00 £ 18DHE 27 Set 204285 985.00 £ 18Electronic closed-loop controlType Mat. no. Price PageDHB-E 18/21/24 Set 203866 627.00 £ 20DHB-E 27 LCD Set 203865 640.00 £ 20 Compact instantaneous water heaters, 1-phaseFull electronic controlType Mat. no. Price PageDCE-X 6/8 Premium 238158 419.00 £ 24DCE-X 10/12 Premium 238159 442.00 £ 24Electronic closed-loop controlType Mat. no. Price PageDCE-S 6/8 Plus 238153 369.00 £ 26DCE-S 10/12 Plus 238154 393.00 £ 26 Mini instantaneous water heatersElectronic closed-loop controlType Mat. no. Price PageDEM 3 Set 236584 301.00 £ 30DEM 4 Set 236462 301.00 £ 30DEM 6 Set 236463 301.00 £ 30 Taps for instantaneous water heatersTaps for mini instantaneous water heatersType Mat. no. Price PagelMAZ 205621 98.00 £ 34 Accessories for instantaneous water heatersAccessories for compact instantaneous water heatersType Mat. no. Price PageUP-Kit EU 200016 11.00 £ 36 Automatic water boilersUndersinkType Mat. no. Price PageHOT 2.6 N 1600 Premium + 3in1 N3 c 203882 545.00 £ 40HOT 2.6 N 1600 Premium + 3in1 N4 b 203883 638.00 £ 40 Small water heaters, non-pressurisedUndersinkType Mat. no. Price PageSNE 5 t ECO GB 202135 197.00 £ 44SNU 5 Plus (GB) 204971 189.00 £ 46SNU 10 Plus (GB) 204981 201.00 £ 46SNU 5 Plus GB + WST-W 205848 309.00 £ 48SNU 10 Plus GB + WST-W 205849 324.00 £ 49OversinkType Mat. no. Price PageSNO 5 Plus (GB) 204979 176.00 £ 50SNO 10 Plus (GB) 204984 235.00 £ 50SN 15 SL GB 227682 301.00 £ 51 Accessories for small water heaters and DHW cylinders, non-pressurisedTaps, undersinkType Mat. no. Price PagelWUT-K 205615 124.00 £ 54WST-W parts kit SNU GB 54lTWS-W 205613 75.00 £ 55lMAE-K 205616 75.00 £ 55 Small water heaters, pressurisedUndersinkType Mat. no. Price PagenSHC 10 GB Eltron 235232 274.00 £ 58nSHC 15 GB 234407 315.00 £ 58SHU 5 SL GB Set AX 227687 340.00 £ 60SH 15 SL GB Set AX 227692 433.00 £ 61SHU 10 SL GB Set AX 227689 381.00 £ 62 Accessories for small water heaters, pressurisedAccessoriesType Mat. no. Price PageUVK (SH/SHU/SHC) 236701 201.00 £ 64UVK (SH/SHC) 236702 201.00 £ 64 Wall mounted cylinderPressurisedType Mat. no. Price PageSHZ 50 S (GB) 232784 1,090.00 £ 68SHZ 100 S (GB) 232786 1,129.00 £ 68SHZ 150 S (GB) 232788 1,235.00 £ 68SHZ 30 S (GB) 232783 1,050.00 £ 68 Floor mounted cylinderElectric floor mounted cylinders, pressurisedType Mat. no. Price PageESH 120 F Trend GB 204791 698.00 £ 72ESH 150 F Trend GB 204792 837.00 £ 72ESH 180 F Trend GB 204793 872.00 £ 72ESH 210 F Trend GB 204794 911.00 £ 72ESH 250 F Trend GB 204795 991.00 £ 72ESH 300 F Trend GB 204796 1,080.00 £ 72 Accessories for floor mounted cylinders, pressurisedElectric threaded immersion heaters and flanged immersion heatersType Mat. no. Price PageFCR 21/60 071330 1,011.00 £ 74FCR 21/120 071331 958.00 £ 74FCR 28/120 E 000694 1,083.00 £ 74FCR 28/180 E 000695 1,095.00 £ 74BGC 6 kW 500 mm ET 003769 261.00 £ 74BGC/45 075115 274.00 £ 74 Product information 2024 - Subject to technical modifications. 7

Table of contentsProduct range directory Compact DHW heat pumpsFloorstandingType Mat. no. Price PageWWK 302 H Set 236467 3,823.00 £ 82 DHW heat pump accessoriesInstallation accessoriesType Mat. no. Price PageBGC 6 kW 500 mm ET 003769 261.00 £ 84BGC/45 075115 274.00 £ 84 Air source heat pumps, outdoor installation – inverterInverterType Mat. no. Price PageWPL-A 07 HK 230 Premium 200123 5,000.00 £ 90WPL-A Premium Pack 7 204906 9,900.00 £ 94WPL-A Premium Pack 8 204907 11,880.00 £ 95WPL-A Premium Pack 9 204908 9,781.00 £ 96lWPL-A 07 HK Premium Compact Set 206044 9,900.00 £ 97WPL 25 ACS 236643 6,450.00 £ 99lWPL 25 ACS Compact Set 206042 11,350.00 £ 103WPL Plus Pack 1 204911 11,350.00 £ 104WPL Plus Pack 2 204912 13,330.00 £ 105WPL Plus Pack 3 204913 12,228.00 £ 106WPL Plus Pack 4 204914 13,230.00 £ 107lHPA-O 8 CS Plus int Compact Set 206043 8,195.00 £ 108lHPA-O 8 CS Plus int 239171 3,350.00 £ 109 Accessories for air source heat pumps installed outdoorsInstallation accessoriesType Mat. no. Price PageAS-WP 2 233623 111.00 £ 114WK 2 234722 480.00 £ 114WK 1.1 238686 200.00 £ 115SK 2 236693 102.00 £ 115 Ground source heat pumps – inverterInverterType Mat. no. Price PageWPE-I 04 HW 230 GB Premium 202637 9,646.00 £ 120WPE-I 06 HW 230 GB Premium 202638 9,749.00 £ 120WPE-I 08 HW 230 GB Premium 202639 10,239.00 £ 120WPE-I 12 HW 230 GB Premium 202640 11,676.00 £ 120WPE-I 15 HW 230 GB Premium 202641 12,443.00 £ 120WPE-I 04 HW 230 GB Premium Pack 204400 12,257.00 £ 122WPE-I 06 HW 230 GB Premium Pack 204406 12,360.00 £ 122WPE-I 08 HW 230 GB Premium Pack 204401 12,848.00 £ 122WPE-I 12 HW 230 GB Premium Pack 204403 14,287.00 £ 122WPE-I 15 HW 230 GB Premium Pack 204408 15,052.00 £ 122WPE-I 04 HK 230 Premium Pack 204399 13,968.00 £ 123WPE-I 06 HK 230 Premium Pack 204405 14,071.00 £ 123WPE-I 08 HK 230 Premium Pack 204402 14,560.00 £ 123WPE-I 12 HK 230 Premium Pack 204407 15,997.00 £ 123WPE-I 15 HK 230 Premium Pack 204404 16,763.00 £ 123WPE-I 04 HK 230 Premium 202615 8,511.00 £ 125WPE-I 06 HK 230 Premium 238614 8,614.00 £ 125WPE-I 08 HK 230 Premium 238615 9,103.00 £ 125WPE-I 12 HK 230 Premium 238616 10,540.00 £ 125WPE-I 15 HK 230 Premium 238617 12,556.00 £ 125WPE-I 33 H 400 Premium 201412 22,121.00 £ 127WPE-I 44 H 400 Premium 201413 24,577.00 £ 127WPE-I 59 H 400 Premium 201414 28,265.00 £ 127WPE-I 87 H 400 Premium 201415 33,180.00 £ 127 Accessories for ground source heat pumpsAccessoriesType Mat. no. Price PageUPF 30/1-8 E 232532 640.00 £ 130UPF 40/1-8 E 227413 1,593.00 £ 130UPF 50/1-12 E 227414 1,991.00 £ 130WPSF 233307 306.00 £ 130MAG 12 235218 67.00 £ 131MAG 18 235219 75.00 £ 131MAG 25 235220 89.00 £ 131MAG 50 235221 134.00 £ 131FS-WP 22 233511 76.00 £ 131FS-WP 28 233512 131.00 £ 131EM 33-87 201715 461.00 £ 132EMW 202062 563.00 £ 132HG Set 33-87 201716 547.00 £ 133FEG 201767 222.00 £ 133FEW 202099 345.00 £ 134TAF PT 2m 235996 30.00 £ 134 Control unitsControllerType Mat. no. Price PageWPM 234727 575.00 £ 138WPE 234725 857.00 £ 138ConnectivityType Mat. no. Price PageISG web 229336 871.00 £ 140Controller accessoriesType Mat. no. Price PageFE 7 185579 79.00 £ 141FET 234723 248.00 £ 141TAF PT 2m 235996 30.00 £ 142Individual room controlType Mat. no. Price PageEZE 237737 220.00 £ 143ESS 237739 648.00 £ 144EHF 237736 278.00 £ 144EFS 237740 27.00 £ 145ERT 237738 63.00 £ 145ERS 237741 111.00 £ 146ERE 237743 106.00 £ 147EIL 237744 53.00 £ 148EIW 237745 73.00 £ 148EAD 237742 21.00 £ 149 Product information 2024 - Subject to technical modifications.8

Table of contentsProduct range directory1 Hydraulic modulesMono modeType Mat. no. Price PageHMS Trend 233826 2,722.00 £ 152 Accessories for hydraulic modulesAccessoriesType Mat. no. Price PageAS-HM Trend 233750 165.00 £ 154 Integral cylinderWith integral buffer cylinderType Mat. no. Price PageHSBC 300 cool (GB) Set 204651 5,630.00 £ 156HSBC 200 S (GB) Set 236917 3,650.00 £ 157HSBC 180 S Plus (GB) Set 204551 4,789.00 £ 158lHSBC 225 S 1 206045 3,650.00 £ 159lHSBC 220 206641 3,650.00 £ 160Without integral buffer cylinderType Mat. no. Price PageHSBB 180 S Plus (GB) Set 204552 3,110.00 £ 161 Accessories for integral cylindersAccessoriesType Mat. no. Price PageHSBC-HKM 234648 600.00 £ 164HSBC 3-HKM 238825 593.00 £ 164RBS-SBC 238827 278.00 £ 164CDT 180 204642 290.00 £ 165 DHW cylinderDHW cylinderType Mat. no. Price PageSBB 302 WP (GB) Set 228945 2,456.00 £ 168SBB 401 WP SOL (GB) Set 228946 2,722.00 £ 168SBB 501 WP SOL (GB) Set 228947 2,986.00 £ 168SBB 300-1 Plus GB 202923 1,459.00 £ 169SBB 400-1 Plus GB 202924 1,526.00 £ 169SBB 500-1 Plus GB 202925 1,881.00 £ 169 Accessories for DHW cylindersAccessoriesType Mat. no. Price PageWRV 32 232628 148.00 £ 172WRV 40 232629 267.00 £ 172 Instantaneous water cylindersInstantaneous water cylindersType Mat. no. Price PageSBS 801 W Set 236482 3,384.00 £ 174SBS 1001 W Set 236483 3,782.00 £ 174SBS 1501 W Set 236484 4,776.00 £ 174SBS 601 W Set 236481 2,986.00 £ 174 Accessories for instantaneous water cylindersAccessoriesType Mat. no. Price PageWDH 601 SBS 231925 710.00 £ 176WDH 801 SBS 231926 737.00 £ 176WDH 1001 SBS 231927 852.00 £ 176WDH 1501 SBS 231928 966.00 £ 176UBS-RL 238490 480.00 £ 176UBS-VL 238489 474.00 £ 176 Buffer cylinderBuffer cylinderType Mat. no. Price PageSBP 100 Plus 206279 525.00 £ 178STH 210 Plus 203763 911.00 £ 178STH 415 Plus 203764 1,103.00 £ 178STH 720 Plus 203765 1,785.00 £ 178STH 720-1 Plus 203766 1,986.00 £ 178SBP 1000 E 227564 1,933.00 £ 179SBP 1000 E SOL 227566 2,046.00 £ 179SBP 1500 E 227565 2,032.00 £ 179SBP 1500 E SOL 227567 2,999.00 £ 179 Accessories for buffer cylindersAccessoriesType Mat. no. Price PageWPKI 5-I 205875 468.00 £ 182BBI 5-I 205877 148.00 £ 182WPKI 6-I 205876 274.00 £ 183ET SBP 003711 69.00 £ 183WDH 1000 SBP 231929 765.00 £ 184WDH 1500 SBP 231930 878.00 £ 184 Additional accessoriesElectric threaded immersion heaters and flanged immersion heatersType Mat. no. Price PageBGC 6 kW 500 mm ET 003769 261.00 £ 186BGC/45 075115 274.00 £ 186FCR 21/60 071330 1,011.00 £ 186FCR 21/120 071331 958.00 £ 186FCR 28/120 E 000694 1,083.00 £ 186FCR 28/180 E 000695 1,095.00 £ 186 Heat pump accessoriesDHW heatingType Mat. no. Price PageUPZ 233719 327.00 £ 190UP 25-60-180 056899 281.00 £ 190Heating system hydraulicsType Mat. no. Price PageUP 25/7.5 PCV 201620 200.00 £ 191UP 25/1-8 PCV 205285 407.00 £ 191UP 30/1-8 PCV 205286 407.00 £ 191nUP 40/1-8 E 227422 1,449.00 £ 191nUP 50/1-12 E 227423 1,859.00 £ 191Product information 2024 - Subject to technical modifications. 9

Table of contentsProduct range directorylUP 40/1-8 E 206633 1,450.00 £ 191lUP 50/1-12 E 206636 1,850.00 £ 191lWPKI-HK DN 25 206627 572.00 £ 192lWPKI-HKM 24 DN 32 206628 1,519.00 £ 192lWPKI-HKM 24 DN 40 206632 3,439.00 £ 192lWPKI-HKM 230 DN 25 206631 558.00 £ 193lWPKI-HKV 2 206638 301.00 £ 194lWPKI-HKV 3 206637 406.00 £ 194HUV 1 227420 340.00 £ 195HUV 2 223391 752.00 £ 195HUK 100 Set 203711 1,944.00 £ 195HUK 125 Set 203712 2,034.00 £ 195HUK 150 Set 203713 3,619.00 £ 195HUK 200 Set 203714 4,248.00 £ 195FSHP-L45 202779 658.00 £ 196Additional accessoriesType Mat. no. Price PageSTB-FB 233711 42.00 £ 197 Decentralised ventilation in residential buildingsSupply and extract air with heat recoveryType Mat. no. Price PagelVLR 70 L Trend EU 203133 309.00 £ 202Extract air without heat recoveryType Mat. no. Price PagelLA 100 A 205771 204lZLA 100-H 205830 205lLA 100 G-A 205906 205lLA 100 VE 205907 206lLWF W 100 VA - 60 231104 206 Accessories for decentralised ventilation in residential buildingsAccessories for controllersType Mat. no. Price PagelZLWE CO2 236673 536.00 £ 208lVLR 70-2 CU 239570 220.00 £ 208lVLR 70-4 CU 239571 229.00 £ 208lVLR 70-8 CU 239572 241.00 £ 208lZLWE HUMIDITY 236674 232.00 £ 209FilterType Mat. no. Price PagelSP VLR 70 RF COARSE 30 G2-4 239562 12.00 £ 210lSP VLR 70 RF EPM1 80 F9-4 201274 32.00 £ 210lSP VLR 70 RF EPM1 50 F7-4 239577 35.00 £ 210lSP VLR 70 RF COARSE 60 G4-4 239575 28.50 £ 210lSP VLR 70 RF EPM10 50 M5-4 239576 32.00 £ 211 Storage heaterStandard storage heaterType Mat. no. Price PageSHF 6000 200179 947.00 £ 216SHF 7000 200180 1,060.00 £ 216SHF 2000 200175 660.00 £ 216SHF 3000 200176 710.00 £ 216SHF 4000 200177 782.00 £ 216SHF 5000 200178 842.00 £ 216Slimline storage heaterType Mat. no. Price PageSHS 1200 200181 708.00 £ 218SHS 1800 200182 728.00 £ 218SHS 2400 200183 788.00 £ 218SHS 3000 200184 842.00 £ 218SHS 3600 200185 895.00 £ 219SHS 4200 200186 967.00 £ 219SHS 4800 200187 1,022.00 £ 219 Accessories for storage heatersAccessoriesType Mat. no. Price PageZhzg. 0,35kW 238723 68.00 £ 222Zhzg. 0,5kW 238724 68.00 £ 222Zhzg. 0,8kW 238725 75.00 £ 222Zhzg. 1kW 238726 75.00 £ 222Zhzg. 1,2kW 238727 79.00 £ 222Zhzg. 1,5kW 238728 83.00 £ 222Zhzg. 1,7kW 238915 89.00 £ 222ZWVK 1 182028 108.00 £ 222ZWVK 2 182102 108.00 £ 222ZWSK 182101 33.00 £ 223BSW 230 200166 13.00 £ 223 ConvectorsWall installationType Mat. no. Price PagenCON 5 Premium U 201278 253.00 £ 230nCON 10 Premium U 200268 261.00 £ 230nCON 15 Premium U 200269 267.00 £ 230nCON 20 Premium U 200270 274.00 £ 230nCON 30 Premium U 200276 368.00 £ 230lCNS 50 Connect UK 205639 218.00 £ 231lCNS 75 Connect UK 205640 225.00 £ 231lCNS 100 Connect UK 205641 232.00 £ 231lCNS 150 Connect UK 205642 262.00 £ 231lCNS 250 Connect UK 205644 308.00 £ 232lCNS 300 Connect UK 205645 318.00 £ 232lCNS 200 Connect UK 205643 269.00 £ 232lCNS-U 500 Plus LCD (UK) 205867 162.00 £ 233lCNS-U 750 Plus LCD (UK) 205868 166.00 £ 233lCNS-U 1000 Plus LCD (UK) 205869 172.00 £ 233lCNS-U 1500 Plus LCD (UK) 205870 193.00 £ 233lCNS-U 2500 Plus LCD (UK) 205872 227.00 £ 233lCNS-U 3000 Plus LCD (UK) 205873 235.00 £ 233lCNS-U 2000 Plus LCD (UK) 205871 200.00 £ 233nCNS 50 Trend UK 236559 162.00 £ 235nCNS 75 Trend UK 236560 166.00 £ 235nCNS 100 Trend UK 236561 173.00 £ 235nCNS 150 Trend UK 236562 193.00 £ 235nCNS 200 Trend UK 236563 200.00 £ 235nCNS 250 Trend UK 236564 227.00 £ 235nCNS 300 Trend UK 236565 235.00 £ 235CNS 50 Trend NC 202001 162.00 £ 237CNS 75 Trend NC 202002 166.00 £ 237CNS 100 Trend NC 202003 173.00 £ 237CNS 200 Trend NC 202005 200.00 £ 237CNS 150 Trend NC 202004 193.00 £ 237Product information 2024 - Subject to technical modifications.10

Table of contentsProduct range directory1 Duo convectorsWall installationType Mat. no. Price PageCND 75 234813 334.00 £ 240CND 100 234814 393.00 £ 240CND 150 234815 454.00 £ 240CND 200 234816 501.00 £ 240 Accessories for convectorsAccessoriesType Mat. no. Price PageService tool CNS 203981 773.00 £ 242 Rapid heaterRapid heaterType Mat. no. Price PageCK 20 Premium 237835 221.00 £ 246CK 20 trend LCD 236653 148.00 £ 247 Bathroom radiatorTowel railsType Mat. no. Price PageBHE 50 Plus 239141 382.00 £ 248BHE 75 Plus 238713 509.00 £ 248BHE 100 Plus 238714 614.00 £ 248BHE 175 T Plus 238715 663.00 £ 248 Infrared wall mounted radiant heaterIndoorType Mat. no. Price PageIW 120 229339 64.00 £ 249 Hand dryer, high speedHigh speedType Mat. no. Price PageULTRONIC Premium 205633 356.00 £ 254ULTRONIC Plus 205632 304.00 £ 255Product information 2024 - Subject to technical modifications. 11

Table of contentsTable of contents Successor directoryNew and discontinued productsTaps for instantaneous water heatersTaps for mini instantaneous water heatersDiscontinued productMat. no.Available untilPageNew or replace-ment productProduct numberAvailable fromPage MAZ 205621 07.2023 30 Accessories for small water heaters and DHW cylinders, non-pressurisedTaps, undersinkDiscontinued productMat. no.Available untilPageNew or replace-ment productProduct numberAvailable fromPage WUT-K 205615 07.2023 54 TWS-W 205613 01.2024 55 MAE-K 205616 01.2024 55 Small water heaters, pressurisedUndersinkDiscontinued productMat. no.Available untilPageNew or replace-ment productProduct numberAvailable fromPageSHC 15 GB 234407 05.2024 58 58SHC 10 GB Eltron235232 05.2024 58 58 Air source heat pumps, outdoor installation – inverterInverterDiscontinued productMat. no.Available untilPageNew or replace-ment productProduct numberAvailable fromPage WPL-A 07 HK Premium Com-pact Set206044 07.2023 97 WPL 25 ACS Compact Set206042 07.2023 103 HPA-O 8 CS Plus int Compact Set206043 07.2023 108 HPA-O 8 CS Plus int239171 07.2023 109 Integral cylinderWith integral buffer cylinderDiscontinued productMat. no.Available untilPageNew or replace-ment productProduct numberAvailable fromPage HSBC 225 S 1 206045 07.2023 159 HSBC 220 206641 01.2024 160 Heat pump accessoriesHeating system hydraulicsDiscontinued productMat. no.Available untilPageNew or replace-ment productProduct numberAvailable fromPageUP 40/1-8 E 227422 02.2024 191 UP 40/1-8 E 206633 03.2024 191UP 50/1-12 E 227423 02.2024 191 UP 50/1-12 E 206636 03.2024 191 WPKI-HKM 24 DN 32206628 01.2024 192 WPKI-HK DN 25 206627 01.2024 193 WPKI-HKM 24 DN 40206632 01.2024 192 WPKI-HKM 230 DN 25206631 01.2024 193 WPKI-HKV 3 206637 01.2024 194 WPKI-HKV 2 206638 01.2024 194Decentralised ventilation in residential buildingsSupply and extract air with heat recoveryDiscontinued productMat. no.Available untilPageNew or replace-ment productProduct numberAvailable fromPage VLR 70 L Trend EU203133 07.2023 202Extract air without heat recoveryDiscontinued productMat. no.Available untilPageNew or replace-ment productProduct numberAvailable fromPage LA 100 A 205771 09.2023 204 LA 100 G-A 205906 09.2023 205 ZLA 100-H 205830 09.2023 205 LA 100 VE 205907 09.2023 206 LWF W 100 VA - 60231104 09.2023 206 Accessories for decentralised ventilation in residential buildingsAccessories for controllersDiscontinued productMat. no.Available untilPageNew or replace-ment productProduct numberAvailable fromPage ZLWE CO2 236673 01.2024 208 VLR 70-2 CU 239570 07.2023 208 VLR 70-8 CU 239572 07.2023 208 VLR 70-4 CU 239571 07.2023 208 ZLWE HUMIDITY 236674 01.2024 209FilterDiscontinued productMat. no.Available untilPageNew or replace-ment productProduct numberAvailable fromPage SP VLR 70 RF COARSE 60 G4-4239575 07.2023 210 SP VLR 70 RF EPM1 80 F9-4201274 01.2024 210 SP VLR 70 RF COARSE 30 G2-4239562 07.2023 210 SP VLR 70 RF EPM1 50 F7-4239577 07.2023 210 SP VLR 70 RF EPM10 50 M5-4239576 07.2023 211 ConvectorsWall installationDiscontinued productMat. no.Available untilPageNew or replace-ment productProduct numberAvailable fromPageCON 15 Premium U200269 06.2024 230 CON 30 Premium U200276 06.2024 230 CON 20 Premium U200270 06.2024 230 CON 5 Premium U201278 06.2024 230 CON 10 Premium U200268 06.2024 230 CNS 100 Connect UK205641 09.2023 231 CNS 75 Connect UK205640 09.2023 221 CNS 150 Connect UK205642 09.2023 221Product information 2024 - Subject to technical modifications.12

Table of contentsNew and discontinued products1 CNS 50 Connect UK205639 09.2023 221 CNS 250 Connect UK205644 09.2023 222 CNS 200 Connect UK205643 09.2023 222 CNS 300 Connect UK205645 09.2023 222CNS 300 Trend UK236565 12.2023 225CNS-U 3000 Plus LCD (UK)205873 10.2023 223CNS 100 Trend UK236561 12.2023 225CNS-U 1000 Plus LCD (UK)205869 10.2023 223CNS 250 Trend UK236564 12.2023 225CNS-U 2500 Plus LCD (UK)205872 10.2023 223CNS 75 Trend UK 236560 12.2023 225CNS-U 750 Plus LCD (UK)205868 10.2023 223CNS 200 Trend UK236563 12.2023 225CNS-U 2000 Plus LCD (UK)205871 10.2023 223CNS 150 Trend UK236562 12.2023 225CNS-U 1500 Plus LCD (UK)205870 10.2023 223CNS 50 Trend UK 236559 12.2023 225CNS-U 500 Plus LCD (UK)205867 10.2023 223Product information 2024 - Subject to technical modifications. 13

Product information 2024 - Subject to technical modifications.14

Domestic hot waterInstantaneous water heater15Domestic hot water Instantaneous water heaterProduct information 2024 - Subject to technical modifications.2Comfort instantaneous water heaters 18Compact instantaneous water heaters, 1-phase 24Mini instantaneous water heaters 30Taps for instantaneous water heaters 34Accessories for instantaneous water heaters 36

Comfort instantaneous water heatersApplication areas16Comfort instantaneous water heaters Application areasProduct information 2024 - Subject to technical modifications. Rated output: Please note the rated output and fuse protection when selecting an instantaneous water heater Starting flow rate: Please note the starting flow rate of the instantaneous water heater when selecting your fitting kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 l/min 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 2,2 2,3 2,4 2,5 2,6 2,7 2,8 2,9 3,0 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4,0 4 ,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5,0 DHE 18/21/24 Set DHE 27 Set kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 l/min 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 2,2 2,3 2,4 2,5 2,6 2,7 2,8 2,9 3,0 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4,0 4,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5,0 DHB-E 18/21/24 Set DHB-E 27 LCD Set

Instantaneous water heaterComfort instantaneous water heaters17Instantaneous water heater Comfort instantaneous water heatersProduct information 2024 - Subject to technical modifications.2Full electronic control DHE Set18Electronic closed-loop control DHB-E LCD Set20

Comfort instantaneous water heatersFull electronic control18next page >Comfort instantaneous water heaters Full electronic controlProduct information 2024 - Subject to technical modifications.DHE SetBenefits › Maximum energy efficiency and accurate temperature delivery at all times thanks to fully electronic output control with 4i technol-ogy › The temperature can be permanently restricted by the installer to 55, 50 or 43°C; the temperature can be further restricted by the user (childproofing) › Greater convenience when installed undersink, since the appliance cover and the programming unit can be turned the other way up › Optimum energy efficiency through selectable ECO mode › Consumption indicator for transparent costs › Quick temperature selection with two memory buttons › Safe operation thanks to extensive range of convenience and safety functions › Easy operation via large, illuminated multifunction display › Suitable for reheating preheated water › Quick installation with Profi-Rapid, the innovative installation concept › Adjustable connected load for flexibility in use (Product: 204284) › Highly flexible installation thanks to selectable appliance output – 18/21/24 kW in a single appliance (Product: 204284)Application • This comfort instantaneous water heater is suitable for supplying DHW simultaneously to multiple draw-off points, for example the bathroom and the kitchen. • The sealed, pressure-tested appliance can be combined with all commercially available pressure taps.Application • This fully electronically controlled instantaneous water heater with 4i technology ensures accurate temperature delivery at all times thanks to electronic flow rate control. • Variable, digital temperature selection via rotary selector, temperature adjustment in 0.5 °C increments. • Backlit multifunction display to show values such as set temperature, current power consumption, energy consumption, flow rate, time, status and service information. ECO function. Two memory buttons for programmable preferred temperatures. • Four wellness shower programs, automated bath filling. • LED indicator warns of scalding at temperatures above 43 °C or when there are unexpect-edly high outlet temperatures due to preheated water, for example from a solar thermal system. Inlet temperature displayed in lower section. • Individually adjustable temperature limit (childproofing). • Convenient remote control available as an option. • To ensure consistently high ease of use in undersink installations, the appliance cover and programming unit can be rotated.Efficiency • Energy and water savings of up to 30 % through full electronic output control with 4i technology. Three sensors and an additional motorised valve ensure that the set temperature is achieved to the exact degree at all times. Only the amount of energy required is expended; there is no need to add cold water at the tap. This ensures maximum energy efficiency. • Individually selectable ECO mode for particularly economical operation. The display gives details of savings actually made and further possible savings. • Suitable for preheated water from solar thermal and heat pump systems.Installation • Profi-Rapid installation system for even quicker and easier installation. Straightforward replacement for all standard instantaneous water heaters. Simple wall mounting: universal mounting rail with integrated compen-sation for any unevenness in the wall and drill hole discrepancies; suitable for commonly used fixing points. • Quick and universal water connection: enlarged installation area with pivoting cold water inlet, threaded water fittings, twin nipple for easy replacement, surface/flush mounting with 3-way shut-off, suitable for plastic pipes (observe manufacturer’s instructions). • Straightforward mains connection: from above or below; cable insertion aid. • Fault memory can be called up on the display for fault analysis, plus LED diagnostic traffic light. • The internal assembly can be removed with just one hand movement.Safety • Quick-action bare wire heating system, suitable for hard and soft water. • Electronic safety concept with air detection. • Anti-scalding protection with permanent limitation of the water outlet temperature is set by an installer.DHE 18/21/24 Set DHE 18/21/24 Set DHE 27 SetPart number 204284 204285Price excl. VAT £ 970.00 985.00 Specification Rated voltage V 400 400Rated voltage 1 V 380 380Rated voltage 2 V 400 400

Comfort instantaneous water heatersFull electronic control19Product information 2024 - Subject to technical modifications.2 DHE 18/21/24 Set DHE 27 SetRated voltage 3 V 415 Rated output kW 18/21/24 27Rated output 1 kW 16,2/19/21,7 24,4Rated output 2 kW 18/21/24 27Rated output 3 kW 19,4/22,6/25,8 Rated current A 29/31/35 39Rated current 1 A 27,6/29,5/33,3 37,1Rated current 2 A 29/31/35 39Rated current 3 A 30,1/32,2/36,3 Fuse protection A 32/32/35 40Fuse protection 1 A 32/32/35 40Fuse protection 2 A 32/32/35 40Fuse protection 3 A 32/32/40 Frequency Hz 50/60 50/-Frequency 1 Hz 50/60 50/-Frequency 2 Hz 50/60 50/-Frequency 3 Hz 50/- Phases 3/PE 3/PEResistivity ρ15 ≥ Ω cm 900 900Conductivity σ15 ≤ μS/cm 1111 1111ON l/min >2,5 >2,5IP rating IP 25 IP 25Temperature setting °C Off, 20-60 Off, 20-60Colour white whiteHeight mm 466 466Width mm 225 225Depth mm 116 116Weight kg 3.10 3.10Energy efficiency class A AIncl.connector / adaptor for 1/2” fitting onto 15 mm solder fitting (239550).

Comfort instantaneous water heatersElectronic closed-loop control20next page >Comfort instantaneous water heaters Electronic closed-loop controlProduct information 2024 - Subject to technical modifications.DHB-E LCD SetBenefits › Greater convenience when installed undersink, since the appliance cover and the programming unit can be turned the other way up › Precise temperature selection via rotary selector › Suitable for preheated water from solar thermal systems and heat pumps, up to 55°C with reheating and up to a maximum of 70°C without reheating. › Temperature shown on the LCD screen › Maximum energy efficiency and accurate temperature delivery with 3i technology and electronic closed-loop control › Quick installation with PROFI-RAPID › High safety level as anti-scalding protection can be permanently activated › Highly flexible installation thanks to selectable appliance output – 18/21/24 kW in a single appliance (Product: 203866)Application • This comfort instantaneous water heater is suitable for DHW supply to multiple draw-off points (individu-al and group supply), for example for simultaneous supply to the bathroom and kitchen. • The sealed, pressure-tested appliance can be used with all commercially available pressure taps.Convenience features • The instantaneous water heater with electronic closed-loop control via 3i technology ensures accurate temperature delivery up to the maximum output. • Variable, digital temperature selection via the rotary selector. • LCD screen for temperature display; convenient remote control available as an option. • The rotatable appliance cover and programming unit ensure ease of use in undersink installations.Efficiency • Energy and water savings of up to 30 % are achieved with the electronic output control with 3i technology. 3 sensors ensure that the set temperature is achieved to the exact degree. For this, only the amount of energy actually required is expended. There is no need to add cold water at the tap, which leads to very good energy efficiency. • Suitable for preheated water, for example from solar thermal and heat pump systems.Installation • The improved PROFI-RAPID installation system ensures quick and easy installation. • Straightforward replacement for all standard instantaneous water heaters. • Simple wall mounting with the universal mounting rail. It compensates for any wall unevenness and drill hole discrepancies, and is also suitable for commonly used fixing points. • Quick and universal water connection thanks to enlarged installation area with pivoting cold water inlet, threaded water fittings, twin nipple for easy replacement, surface/flush mounting with 3-way shut-off, suitable for plastic pipes (observe manufacturer’s instructions). Straightforward mains connection from above or below; cable insertion aid.Service • Rapid fault analysis with integral LED diagnostic traffic light. • The internal assembly can be removed with just one hand movement.Safety • The quick-action bare wire heating system is suitable for hard and soft water. • The electronic safety concept is equipped with air detection. • To permanently limit the water outlet temperature, an installer can set anti-scalding protection.DHB-E 18/21/24 Set DHB-E 18/21/24 Set DHB-E 27 LCD SetPart number 203866 203865Price excl. VAT £ 627.00 640.00 Specification Rated voltage V 400 400Rated voltage 1 V 380 380Rated voltage 2 V 400 400Rated voltage 3 V 415 Rated output kW 18/21/24 27Rated output 1 kW 16,2/19/21,7 24,4Rated output 2 kW 18/21/24 27Rated output 3 kW 19,4/22,6/25,8 19,4/22,6/25,8Rated current A 29/31/35 39Rated current 1 A 27,6/29,5/33,3 37,1Rated current 2 A 29/31/35 39Rated current 3 A 30,1/32,2/36,3 30,1/32,2/36,3

Comfort instantaneous water heatersElectronic closed-loop control21Product information 2024 - Subject to technical modifications.2 DHB-E 18/21/24 Set DHB-E 27 LCD SetFuse protection A 32/32/35 40Fuse protection 1 A 32/32/35 40Fuse protection 2 A 32/32/35 40Fuse protection 3 A 32/32/40 32/32/40Frequency Hz 50/60 50/-Frequency 1 Hz 50/60 50/-Frequency 2 Hz 50/60 50/-Frequency 3 Hz 50/- 50/-Phases 3/PE 3/PEResistivity ρ15 ≥ Ω cm 900 900Conductivity σ15 ≤ μS/cm 1111 1111ON l/min >2,5 >2,5IP rating IP 25 IP 25Temperature setting °C Off, 20-60 Off, 20-60Colour white whiteHeight mm 466 466Width mm 225 225Depth mm 116 116Weight kg 2.90 2.90Energy efficiency class A AIncl.connector / adaptor for 1/2” fitting onto 15 mm solder fitting (239550).

Compact instantaneous water heaters, 1-phaseApplication areas22Compact instantaneous water heaters, 1-phaseApplication areasProduct information 2024 - Subject to technical modifications. Rated output: Please note the rated output and fuse protection when selecting an instantaneous water heater Starting flow rate: Please note the starting flow rate of the instantaneous water heater when selecting your fitting kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 l/min 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 2,2 2,3 2,4 2,5 2,6 2,7 2,8 2,9 3,0 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4,0 4,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5,0 DCE-X 6/8 Premium DCE-X 10/12 Premium kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 l/min 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 2,2 2,3 2,4 2,5 2,6 2,7 2,8 2,9 3,0 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4,0 4,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5,0 DCE-S 6/8 Plus DCE-S 10/12 Plus

Instantaneous water heaterCompact instantaneous water heaters, 1-phase23Instantaneous water heater Compact instantaneous water heaters, 1-phaseProduct information 2024 - Subject to technical modifications.2Full electronic control DCE-X Premium24Electronic closed-loop control DCE-S Plus26

Compact instantaneous water heaters, 1-phaseFull electronic control24next page >Compact instantaneous water heaters, 1-phaseFull electronic controlProduct information 2024 - Subject to technical modifications.DCE-X PremiumBenefits › Maximum energy efficiency and accurate temperature delivery at all times thanks to fully electronic output control using 4i tech-nology, in compact design › Easy operation via large, illuminated multifunction display › Energy saving operation with ECO function › Fully transparent costs thanks to water and power consumption indicator › High quality design | Made in Germany › Quick temperature selection with two memory buttons › Safe operation thanks to extensive range of convenience and safety functions › Quick installation with PROFI-RAPID › Selectable output – can be adjusted internally › Suitable for preheated water from solar thermal systems and heat pumps, up to 55°C with reheating and up to a maximum of 70°C without reheating. › Instant hot water thanks to rapid and maintenance-free bare wire heating systemApplication • This space saving compact instantaneous water heater ensures the supply of DHW even to multiple draw-off points – for example a shower, kitchen sink and washbasin. In commercial settings, cleaning rooms or multiple washbasins in sanitary facilities can be supplied. The unvented, pressure-tested appliance can be connected to all commercially available taps.Convenience features • The fully electronically controlled compact instantaneous water heater ensures accurate temperature delivery at all times thanks to the electronic flow rate control. • The temperatures are variably and dig-itally adjusted in very precise 0.5 °C increments. • The large multifunction display with white backlighting not only shows the set temperature but also provides information on the current power consumption, energy consumption, flow rate and time. Status and service information is also displayed. • The instantaneous water heater provides a memory function for 2 programmable preferred temperatures as well as a wide range of comfort functions, including various wellness programs and automated bath filling. • The individually adjustable temperature limiting function can be used for anti-scalding protection and childproofing. • An LED indicator provides information about heating operation. • The keypad lock protects the appliance against unintentional adjustment.Efficiency • The appliance ensures energy and water savings of up to 30 % through fully electronic output control with 4i technology. Three sensors and an additional motorised valve ensure that the set temperature is achieved to the exact degree at all times. Only the amount of energy actually required is expended; there is no need to add cold water at the tap. As there are no thermal losses in the cylinder or pipework either, the instantaneous water heater is impressively efficient. Also contributing to this efficiency is the individually selectable ECO mode. • The current water and power consumption can be displayed. • The appliance is suitable for operation with preheated water from solar thermal and heat pump systems.Installation • Quick and easy installation with the PROFI-RAPID installation system. • Straightforward, stable wall mounting: direct fitting through the appliance back panel enables easy compensation for any wall unevenness and drill hole discrepancies. • Fast universal water connection using 1/2” connections. The brass water connections at the bottom enable straightforward surface mounting. Optional accessories are available for flush mounting with non-visible water connections. • Fitting to plastic pipework is also possible (follow the manufacturer’s instructions). • Easy and flexible electrical connection at the top or bottom when flush mounting and at the bottom or sides when surface mounting. • The appliance cover can be easily opened using a central screw. • The entire inner assembly can be detached from the back panel. • Fast fault analysis with LED diagnostic traffic light.Safety • The temperature can be permanently limited by an installer to suit individual needs. • The bare wire heating system is suitable for hard and soft water. • Multi stage electronic safety concept with air detection.DCE-X 6/8 Premium DCE-X 6/8 Premium DCE-X 10/12 PremiumPart number 238158 238159Price excl. VAT £ 419.00 442.00 Specification Rated voltage V 220 220Rated voltage 1 V 220 220Rated voltage 2 V 230 230Rated voltage 3 V 240 240Rated output kW 6.0/8.0 10.0/12.0Rated output 1 kW 6.0/8.0 10.0/12.0

Compact instantaneous water heaters, 1-phaseFull electronic control25Product information 2024 - Subject to technical modifications.2 DCE-X 6/8 Premium DCE-X 10/12 PremiumRated output 2 kW 6.6/8.7 11.0/13.1Rated output 3 kW 7.2/9.6 12.0/14.3Rated current A 27.3/36.4 45.5/54.5Rated current 1 A 27.3/36.4 45.5/54.5Rated current 2 A 28.5/38.0 47.8/57.0Rated current 3 A 30.0/40.0 50.0/59.5Fuse protection A 30/40 50/60Fuse protection 1 A 30/40 50/60Fuse protection 2 A 30/40 50/60Fuse protection 3 A 30/40 50/60Frequency Hz 50/60 50/60Frequency 1 Hz 50/60 50/60Frequency 2 Hz 50/60 50/60Frequency 3 Hz 50/60 50/60Phases 1/N/PE 1/N/PEResistivity ρ15 ≥ Ω cm 1100 1100Resistivity ρ15 ≥ (at ϑcold ≤ 55 °C)μS/cm 1,100 1,100Conductivity σ15 ≤ μS/cm 910 910ON l/min 1.3 1.3IP rating IP 25 IP 25Temperature setting °C Off, 20 - 60 Off, 20 - 60Colour white whiteHeight mm 372 372Width mm 217 217Depth mm 109 109Weight kg 2.50 2.50Energy efficiency class A A

Compact instantaneous water heaters, 1-phaseElectronic closed-loop control26next page >Compact instantaneous water heaters, 1-phaseElectronic closed-loop controlProduct information 2024 - Subject to technical modifications.DCE-S PlusBenefits › Maximum energy efficiency and accurate temperature delivery with 3i technology and electronic closed-loop control › High quality design | Made in Germany › Quick installation with PROFI-RAPID › Selectable output – can be adjusted internally › Suitable for preheated water from solar thermal systems and heat pumps, up to 55°C with reheating and up to a maximum of 70°C without reheating. › Variable temperature selection via rotary selector › High safety level as anti-scalding protection can be permanently activated › Instant hot water thanks to rapid and maintenance-free bare wire heating systemApplication • This compact instantaneous water heater supplies several draw-off points with DHW, for example for the shower and kitchen sink. In commercial settings, water can be supplied to cleaning rooms or multiple washbasins in sanitary facilities. The unvented, pressure-tested appliance can be connected to all commercially available taps.Convenience features • The instantaneous water heater with electronic closed-loop control ensures accurate pre-ferred temperature delivery up to the maximum output. It can be variably adjusted via a manual rotary selector on the appliance.Efficiency • The 3i technology ensures energy and water savings of up to 30 % through electronic output control. • Energy savings are further assured as only the amount of energy actually required is used. • Furthermore, ther-mal losses in the cylinder and pipework are prevented as the water is heated directly at the draw-off point. • Cold water does not need to be added to achieve the preferred temperature, thereby improving the overall efficiency of the appliance. • The compact instantaneous water heater is suitable for operation with preheated water from solar thermal systems or heat pumps.Installation • Quick and easy installation is ensured with the improved PROFI-RAPID installation system. Direct fitting through the appliance back panel enables easy compensation of any unevenness in the wall and drill hole discrepancies. • Fast, universal water connection from above is facilitated through the 1/2” connections. The brass water connections at the bottom enable straightforward surface mounting. Optional accessories are available for flush mounting with non-visible water connections. • Fitting to plastic pipework is also possible if the manufacturer’s instructions are followed. • Simple and flexible mains connection, which is made from below or above in the case of flush-mounted installation. With surface-mounted installation, connection is possible from below or from the side. • The appliance cover can be easily opened using a central screw. • The entire inner assembly can be detached from the back panel. • Rapid fault analysis is assured with the integral LED diagnostic traffic light.Safety • The temperature can be limited by an installer to suit individual needs. • The bare wire heating system is suitable for hard and soft water. • Multi stage electronic safety concept with high limit safety cut-out and air detection.DCE-S 6/8 Plus DCE-S 6/8 Plus DCE-S 10/12 PlusPart number 238153 238154Price excl. VAT £ 369.00 393.00 Specification Rated voltage V 220 220Rated voltage 1 V 220 220Rated voltage 2 V 230 230Rated voltage 3 V 240 240Rated output kW 6.0/8.0 10.0/12.0Rated output 1 kW 6.0/8.0 10.0/12.0Rated output 2 kW 6.6/8.7 11.0/13.1Rated output 3 kW 7.2/9.6 12.0/14.3Rated current A 27.3/36.4 45.5/54.5Rated current 1 A 27.3/36.4 45.5/54.5Rated current 2 A 28.5/38.0 47.8/57.0Rated current 3 A 30.0/40.0 50.0/59.5Fuse protection A 30/40 50/60Fuse protection 1 A 30/40 50/60Fuse protection 2 A 30/40 50/60

Compact instantaneous water heaters, 1-phaseElectronic closed-loop control27Product information 2024 - Subject to technical modifications. DCE-S 6/8 Plus DCE-S 10/12 PlusFuse protection 3 A 30/40 50/60Frequency Hz 50/60 50/60Frequency 1 Hz 50/60 50/60Frequency 2 Hz 50/60 50/60Frequency 3 Hz 50/60 50/60Phases 1/N/PE 1/N/PEResistivity ρ15 ≥ Ω cm 1100 1100Resistivity ρ15 ≥ (at ϑcold ≤ 55 °C)μS/cm 1,100 1,100Conductivity σ15 ≤ μS/cm 910 910ON l/min 1.3 1.3IP rating IP 25 IP 25Temperature setting °C 20-60 20-60Colour white whiteHeight mm 372 372Width mm 217 217Depth mm 109 109Weight kg 2.50 2.50Energy efficiency class A A 2

Mini instantaneous water heatersApplication areas28Mini instantaneous water heaters Application areasProduct information 2024 - Subject to technical modifications. Rated output: Please note the rated output and fuse protection when selecting an instantaneous water heater Starting flow rate: Please note the starting flow rate of the instantaneous water heater when selecting your fitting kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 l/min 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 2,2 2,3 2,4 2,5 2,6 2,7 2,8 2,9 3,0 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4,0 4,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5,0 DEM 3 Set DEM 4 Set DEM 6 Set

Instantaneous water heaterMini instantaneous water heaters29Instantaneous water heater Mini instantaneous water heatersProduct information 2024 - Subject to technical modifications.2Electronic closed-loop control DEM Set30

Mini instantaneous water heatersElectronic closed-loop control30next page >Mini instantaneous water heaters Electronic closed-loop controlProduct information 2024 - Subject to technical modifications.DEM SetBenefits › Accurate temperature delivery up to the maximum output › Special aerator for perfect flow pattern › Internal permanent set temperature for childproofing and anti-scalding protection › Supplies one hand washbasin at maximum efficiency due to electronic closed-loop control › Instant hot water thanks to rapid and maintenance-free bare wire heating system › At inlet temperatures > 20°C, also suitable for showers › Suitable for oversink and undersink installation with a single appliance › Can be operated with pressurised and non-pressurised taps › Quick installation with PROFI-RAPID › 3.5kW version comes with standard plug (Product: 236584)Application • This mini instantaneous water heater with electronic closed-loop control can supply DHW to one wash-basin. • Can be operated with pressure taps or non-pressurised taps.Convenience features • Mini instantaneous water heater with closed-loop control, control electronics, outlet temper-ature sensor and variable flow rate limitation. • Accurate temperature delivery up to the maximum output. Internal temperature limiting • Including special aerator for perfect water flow pattern and integral flow controller for use in existing taps. • Anti-scalding protection for high inlet temperatures via automatic output matching. • Oversink or undersink installation possible.Efficiency • Electronic output control for energy efficient and water saving operation. The outlet temperature sensor and control electronics ensure that the set temperature is achieved to the exact degree. For this, only the amount of energy required is expended; there is no need to add cold water at the tap. • The water is heated directly at the draw-off point and only when required. This prevents the energy and water losses caused by long pipe runs. This ensures maximum energy efficiency. • Suitable for preheated water from solar thermal and heat pump systems.Installation • Time saving and easy installation with the PROFI-RAPID installation system. Straightforward wall mounting with 2-point attachment. The back panel simultaneously acts as a drill template; slots compensate for drill hole discrepancies. • The appliance cover and internal assembly can be removed with just one hand movement. • Fast water connection thanks to external metal water fittings for direct, universal installation of taps. • Simple electrical connection as power cable is wired up as standard. • Fault analysis with LED diagnostic traffic light.Safety • Maintenance-free bare wire heating system, suitable for hard and soft water. • Safety system with high pressure switch and electronic temperature monitoring.DEM 3 Set DEM 3 Set DEM 4 Set DEM 6 SetPart number 236584 236462 236463Price excl. VAT £ 301.00 301.00 301.00 Specification Rated voltage V 230 230 230Rated voltage 1 V 200 200 200Rated voltage 2 V 220 220 220Rated voltage 3 V 230 230 230Rated voltage 4 V 240 240 240Rated output kW 3,53 4,4 5,7Rated output 1 kW 2,7 3,3 4,3Rated output 2 kW 3,2 4,0 5,2Rated output 3 kW 3,53 4,4 5,7Rated output 4 kW 3.8 4.8 6.2Rated current A 15,2 19,1 24,7Rated current 1 A 13,3 16,7 21,6Rated current 2 A 14,5 18,2 23,6Rated current 3 A 15,2 19,1 24,7Rated current 4 A 15.8 20.0 25.8Fuse protection A 16 20 25Fuse protection 1 A 16 20 25Fuse protection 2 A 16 20 25

Mini instantaneous water heatersElectronic closed-loop control31Product information 2024 - Subject to technical modifications.2 DEM 3 Set DEM 4 Set DEM 6 SetFuse protection 3 A 16 20 25Fuse protection 4 A 16 20 32Frequency Hz 50/60 50/60 50/60Frequency 1 Hz 50/60 50/60 50/60Frequency 2 Hz 50/60 50/60 50/60Frequency 3 Hz 50/60 50/60 50/60Frequency 4 Hz 50/60 50/60 50/60Phases 1/N/PE 1/N/PE 1/N/PEResistivity ρ15 ≥ (at ϑcold ≤ 25 °C)Ω cm 1000 1000 1000Resistivity ρ15 ≥ (at ϑcold ≤ 50 °C)Ω cm 1300 1300 1300Conductivity σ15 ≤ (at ϑcold ≤ 25 °C)μS/cm 1000 1000 1000Conductivity σ15 ≤ (at ϑcold ≤ 50 °C)μS/cm 770 770 770Water connection G 3/8 A G 3/8 A G 3/8 AON l/min >1,5 >1,8 >2,2IP rating IP 25 IP 25 IP 25Temperature setting °C 30-50 30-50 30-50Colour white white whiteHeight mm 143 143 143Width mm 190 190 190Depth mm 82 82 82Weight kg 1.70 1.70 1.70Energy efficiency class A A AIncl. connector / adaptor for 3/8” fitting onto 15 mm press fitting (239551).

32Product information 2024 - Subject to technical modifications.

Instantaneous water heaterTaps for instantaneous water heaters33Instantaneous water heater Taps for instantaneous water heatersProduct information 2024 - Subject to technical modifications.2Taps for mini instantaneous water heaters Accessories34

Taps for instantaneous water heatersTaps for mini instantaneous water heaters34Taps for instantaneous water heaters Taps for mini instantaneous water heatersProduct information 2024 - Subject to technical modifications.MAZBenefits › Special aerator for perfect flow pattern › Rapid supply of domestic hot water with no waiting, thanks to non-pressurised operation › Ideal for mini instantaneous water heaters with twin lever operation for separate adjustment of hot and cold waterDescription • Twin lever tap for washbasins. With undersink installation, the tap can be combined with a non-pres-surised mini instantaneous water heater.MAZ MAZ NEWPart number 205621Price excl. VAT £ 98.00 Specification Application WashbasinConnection Connection hosesInstallation type Monobloc mixer tapSurface chrome platedSpout reach mm 134Spout height mm 167Flow rate l/min 6

Instantaneous water heaterAccessories for instantaneous water heaters35Instantaneous water heater Accessories for instantaneous water heatersProduct information 2024 - Subject to technical modifications.2Accessories for compact instantaneous water heaters Accessories36

Accessories for instantaneous water heatersAccessories for compact instantaneous water heaters36Accessories for instantaneous water heatersAccessories for compact instantaneous water heatersProduct information 2024 - Subject to technical modifications.UP-Kit EUBenefits › Installation kit for concealed flush-mounted water connectionsDescription • Installation kit for flush mounting of cold and hot water pipes.UP-Kit EU UP-Kit EUPart number 200016Price excl. VAT £ 11.00 Specification Version Installation kit

Domestic hot water Water boilersProduct information 2024 - Subject to technical modifications.Domestic hot waterWater boilers37Automatic water boilers 403

Product information 2024 - Subject to technical modifications.38

Water boilers Automatic water boilersProduct information 2024 - Subject to technical modifications.Water boilersAutomatic water boilers39Undersink HOT 2.6 N Premium 3in1 Set GB403

Automatic water boilers UndersinkProduct information 2024 - Subject to technical modifications.Automatic water boilersUndersink40HOT 2.6 N Premium 3in1 Set GBBenefits › Very hot water available immediately › Compact and very slimline design › No steam hammer during drawing › With special HOT 3in1 kitchen tap as standard › Childproof thanks to well designed push & turn mechanism › No residual water in the tap › Low energy losses thanks to the high grade thermal insulation › Long service lifeApplication • This compact and very flat automatic water boiler delivers almost boiling water without delay. • The electronic temperature control with automatic boiling point detection controls the electric heater and maintains a constant water temperature of up to 95 °C. • The hot water vessel and heating element are made of high grade stain-less steel for a long service life. • Hot drinks and food can be prepared quickly with the non-pressurised appliance. It also makes it easy to clean very dirty dishes. • The automatic water boiler can be used in the home as well as in small offices and doctors’ practices.Convenience features • The space saving water boiling set comprises a 2.6 l capacity undersink DHW cylinder and the special HOT 3in1 kitchen tap. The tap has a mixing lever for cold and hot water as well as a special lever to draw off almost boiling water from the appliance. • The well designed push & turn mechanism of the tap lever for boiling water ensures everyday safety. Thanks to the special design, the hot water can be drawn off with minimal steam or splashes, and at the same time the surface of the tap can be touched safely at any time. • In order to reduce heat losses and increase safety, hot residual water runs back into the water boiler after draw-off. • If the water hardness is 10 °e (1.5 mmol/l) or higher, the appliance must be operated with a filter. The appliance automatically reminds you of the upcoming filter change. Installation • Quick and easy mains connection via power cable with standard plug.Efficiency • Low standby losses thanks to high grade thermal insulation made of rigid polyurethane foam. • In order to reduce energy consumption, the water temperature can be lowered using time programs. This is useful, for example, in offices where work is only done at certain times.Safety • The appliance features automatic boil-dry detection and an additional high limit safety cut-out. • The special mechanism of the tap lever acts as a childproofing device as it prevents accidental operation.HOT 2.6 N 1600 Premium + 3in1 N3 c HOT 2.6 N 1600 Premium + 3in1 N3 c HOT 2.6 N 1600 Premium + 3in1 N4 bPart number 203882 203883Price excl. VAT £ 545.00 638.00 Specification Power supply 1/N/PE 1/N/PERated voltage V 230 230Fuse protection 1 A 10 10Electrical connection Stecker SteckerFrequency Hz 50-60 50-60 kWh 0.45 0.45Type open openApplication Sink SinkCylinder material Stainless steel Stainless steelColour white whiteSurface chrome plated brushedTemperature selection °C 95 95Height mm 450 450Width mm 200 200Depth mm 145 145Capacity up to l 2,6 2,6Spout height mm 226 226Spout reach mm 210 210Weight kg 9.00 9.00Tap surface chrome plated brushed

Domestic hot water DHW cylinderProduct information 2024 - Subject to technical modifications.Domestic hot waterDHW cylinder41Small water heaters, non-pressurised 44Accessories for small water heaters and DHW cylinders, non-pressurised 54Small water heaters, pressurised 58Accessories for small water heaters, pressurised 64Wall mounted cylinder 68Floor mounted cylinder 72Accessories for floor mounted cylinders, pressurised 744

Small water heaters, non-pressurised Application areasProduct information 2024 - Subject to technical modifications.Small water heaters, non-pressurisedApplication areas42 Nominal capacity l 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 SNE 5 t ECO GB l 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 SNU 5 Plus (GB) SNU 10 Plus (GB) l 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 SNU 10 Plus GB + WST-W l 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 SNO 5 Plus (GB) SNO 10 Plus (GB)

DHW cylinder Small water heaters, non-pressurisedProduct information 2024 - Subject to technical modifications.DHW cylinderSmall water heaters, non-pressurised43Undersink SNE ECO44SNU Plus (GB)46SNU 5 Plus + WST-W (GB)48SNU 10 Plus + WST-W (GB)49Oversink SNO Plus (GB)50SN 15 S GB Set A514

next page >Small water heaters, non-pressurised UndersinkProduct information 2024 - Subject to technical modifications.Small water heaters, non-pressurisedUndersink44SNE ECOBenefits › Rapid supply of domestic hot water with no waiting, thanks to non-pressurised operation › Precise temperature adjustment via operating buttons and electronic closed-loop control › Operating parameters displayed on illuminated LCD screen › Power saving operation with ECO function › Combats germ growth with integral hygiene function › Optimum DHW heating and minimum energy losses with selectable weekly timers › Very low energy losses thanks to high grade thermal insulation › Anti-scalding protection and childproofing thanks to adjustable temperature limit and lockable operating controls › Anti-drip function ensures convenience and hygiene › The thermostop function ensures no energy losses from mixer tap › Plug-in appliance for electrical connection to any standard safety socket › Extensive range of taps available as accessoriesApplication • These non-pressurised, vented small water heaters supply DHW to individual draw-off points such as a kitchen sink or washbasin. The non-pressurised appliances for undersink installation can be combined with commercially available non-pressurised taps.Convenience features • Electronic closed-loop control guarantees convenient and efficient DHW heating. The preferred temperature can be set to the exact degree at the user interface with LCD screen. The current temperature as well as the operating time and heating time are displayed. • Three programmable weekly timers (home, office, individual) are available to customise the appliance. • The hygiene circuit provides pasteurisation of the appliance at the touch of a button. • Both the minimum and maximum temperatures are freely adjustable. • A visual display indicates when the appliance is heating up.Efficiency • The power saving ECO function is activated at the press of a button and visually indicated. • The anti-drip function prevents expansion water dripping during heat-up of the small water heater. This saves water and energy whilst also reducing limescale deposits on the taps, sink or washbasin. • The energy saving thermostop technology prevents unwanted heating of the mixer tap. • The plastic inner cylinder made from polypropylene is protected from energy losses by high grade EPS thermal insulation.Installation • Quick and easy installation with the PROFI-RAPID installation system. Easy replacement as suitable for commonly used fixing points. To simplify wall mounting, a universal mounting rail is included in the standard delivery. • A secure water connection is possible thanks to the metal threaded water fittings with male thread. • The power cable is supplied with a standard plug. Any excess cable can be housed in the practical cable storage compartment in the appliance back panel.Safety • The robust copper tubular heater ensures a long service life thanks to the low surface load. • Safe commis-sioning is assured by the resettable high limit safety cut-out. • For anti-scalding protection, the temperature can be limited electronically to the exact degree. • The automatic frost protection prevents freezing at low temperatures.SNE 5 t ECO GB SNE 5 t ECO GBPart number 202135Price excl. VAT £ 197.00 Specification Connected load kW 2Rated output 2 kW 2,0Power supply 1/N/PERated voltage V 230Fuse protection 2 A 10Frequency Hz 50-60Energy efficiency class AStandby energy consump-tion/24 h at 65 °CkWh 0.20Standby energy consump-tion/24 h at 38 °CkWh 0.09Nominal capacity l 5Mixed water amount at 40 °C l 10Temperature setting range °C 30-85

Product information 2024 - Subject to technical modifications.Small water heaters, non-pressurisedUndersink45 SNE 5 t ECO GBVersion Small water heaterType openInstallation type UndersinkWith tap -Colour whiteCable length m 0,6Operation manualTemperature limit •IP rating IP 24 DHeight mm 421Width mm 263Depth mm 230Weight kg 3.10Installation template Wall mounting bracket (Product: 202135) 4

next page >Product information 2024 - Subject to technical modifications.Small water heaters, non-pressurisedUndersink46SNU Plus (GB)Benefits › Rapid supply of domestic hot water with no waiting › High quality workmanship and attractive design characterise this very compact appliance › Extensive range of taps available as accessories › Very low energy losses thanks to the high grade thermal insulation and integral thermostop function › Quick and easy replacement of predecessor appliances. The existing wall mounting bracket can be used for the replacement. › Low standby energy consumption › WRAS certified (Product: 204971, 204981) › anti-drip function for the highest convenience and hygiene standards (Product: 204971) › High energy efficiency and compact dimensions thanks to innovative vacuum insulation (Product: 204971)Application • These very compact small water heaters with their attractive design are suitable for supplying hot water to individual draw-off points, for example a bathroom washbasin or a kitchen sink. • The non-pressurised appliances provide DHW with no waiting time. They can only be combined with non-pressurised taps.Convenience features • The casing is distinguished by its surface structure that feels pleasant to the touch. • Variable temperature setting via the high quality haptic rotary selector. • Fast and accurate temperature capture by the sensor which is immersed in the water. • 4-stage temperature limit. • Automatic frost protection setting when the appliance is off. • A visual display indicates when the small water heater is heating up.Efficiency • Low energy losses thanks to high grade EPS thermal insulation of the polypropylene inner cylinder. • The energy saving thermostop function prevents unwanted heating of the tap. • Very low standby energy consumption.Installation • Quick installation with the Profi-Rapid installation system. The very compact small water heater is suitable for commonly used fixing points, so that existing appliances can be quickly replaced. • Straightforward wall mounting thanks to universal mounting rail. • Safety due to metal threaded water fittings. • Power cable for permanent connection to the mains. • Splashproof.Safety • The robust copper tubular heater ensures a long service life • Safe commissioning thanks to the resettable high limit safety cut-out. • Anti-scalding protection through mechanical temperature limit. • For the earth conductor test, simply remove the rotary selector, so the test point is always accessible.SNU 5 Plus (GB) 204971 SNU 5 Plus (GB) SNU 10 Plus (GB)Part number 204971 204981Price excl. VAT £ 189.00 201.00 Specification Connected load kW 2 2Rated output 2 kW 2,0 2,0Power supply 1/N/PE 1/N/PERated voltage V 230 230Fuse protection 2 A 10 10Frequency Hz 50-60 50-60Energy efficiency class A AStandby energy consump-tion/24 h at 65 °CkWh 0.19 0.31Standby energy consump-tion/24 h at 38 °CkWh 0.07 0.11Nominal capacity l 5 10Mixed water amount at 40 °C l 9,3 19Temperature setting range °C 35-85 35-85Version Small water heater Small water heaterType open openInstallation type Undersink UndersinkWith tap - -Colour white whiteCable length m 0,9 0,9

Product information 2024 - Subject to technical modifications.Small water heaters, non-pressurisedUndersink47 SNU 5 Plus (GB) SNU 10 Plus (GB)Operation manual manualTemperature limit • •IP rating IP 24 D IP 24 DHeight mm 423 506Width mm 240 290Depth mm 212 282Weight kg 2.90 4.20 Recommended accessories Part number 205613Type TWS-WDescription Twin lever mixer tap, non-pressurised, for washbasinsPrice excl. VAT £ 75.00Part number 205615Type WUT-KDescription Twin lever mixer tap, non-pressurised, for the kitchen sinkPrice excl. VAT £ 124.00Part number 205616Type MAE-KDescription Mono lever mixer tap, non-pressurisedPrice excl. VAT £ 75.00Installation template in the operating instructions Installation template (Product: 204981) 4

Product information 2024 - Subject to technical modifications.Small water heaters, non-pressurisedUndersink48SNU 5 Plus + WST-W (GB)Benefits › Plug-in appliance for easy installation – for electrical connection to any standard safety socket › Rapid supply of domestic hot water with no waiting, thanks to non-pressurised operation › Small water heater and mixer tap in a single packing unit › Very low energy losses thanks to high grade thermal insulation › The thermostop function ensures no energy losses from mixer tap › WRAS certified (Product: 205848) › anti-drip function for the highest convenience and hygiene standards (Product: 205848)Description • DHW set consisting of the SNU 5 Plus (GB) and the non-pressurised, vented WST-W mixer tap for sup-plying DHW to one washbasin.SNU 5 Plus GB + WST-W SNU 5 Plus GB + WST-WPart number 205848Price excl. VAT £ 309.00 Specification Connected load kW 2Rated output 2 kW 2,0Power supply 1/N/PERated voltage V 230Fuse protection 2 A 10Energy efficiency class AStandby energy consump-tion/24 h at 65 °CkWh 0.20Standby energy consump-tion/24 h at 38 °CkWh 0.09Type openInstallation type UndersinkWith tap -Cable length m 0,6Operation manualTemperature limit •IP rating IP 24 DHeight mm 421Width mm 263Depth mm 230Weight kg 3.00SNU 5 Plus WST-W (Product: 205848)

Product information 2024 - Subject to technical modifications.Small water heaters, non-pressurisedUndersink49SNU 10 Plus + WST-W (GB)Benefits › Plug-in appliance for easy installation – for electrical connection to any standard safety socket › Rapid supply of domestic hot water with no waiting, thanks to non-pressurised operation › Small water heater and mixer tap in a single packing unit › Very low energy losses thanks to high grade thermal insulation › The thermostop function ensures no energy losses from mixer tapDescription • DHW set consisting of the SNU 10 Plus (GB) and the non-pressurised, vented WST-W mixer tap for supplying DHW to one washbasin.SNU 10 Plus GB + WST-W SNU 10 Plus GB + WST-WPart number 205849Price excl. VAT £ 324.00 Specification Nominal capacity l 10SNU 10 Plus WST-W (Product: 205849) 4

next page >Small water heaters, non-pressurised OversinkProduct information 2024 - Subject to technical modifications.Small water heaters, non-pressurisedOversink50SNO Plus (GB)Benefits › Rapid supply of domestic hot water with no waiting › High quality workmanship and attractive design characterise this very compact appliance › Very low energy losses thanks to high grade thermal insulation › Quick and easy replacement of predecessor appliances. The existing wall mounting bracket can be used for the replacement. › Low standby energy consumption › WRAS certified (Product: 204979, 204984) › Power cable for permanent connection, approx. 1m (Product: 204979, 204984) › High energy efficiency and compact dimensions thanks to innovative vacuum insulation (Product: 204979)Application • These efficient and energy saving non-pressurised small water heaters supply DHW to individual draw-off points such as sinks in utility rooms or kitchens. • The fittings are a pivoting spout and an inlet valve mounted directly on the small water heater.Convenience features • The cylinder for oversink installation supplies warm and hot water to individual draw-off points at any time. • Variable temperature setting via the high quality haptic rotary selector. • The frost protection function activates automatically when the appliance is switched off. It monitors the water temperature and prevents the cylinder from freezing.Efficiency • Water is heated directly at the draw-off point, which prevents thermal losses in the cylinder and pipe-work. • Low energy losses thanks to high grade EPS thermal insulation of the polypropylene inner cylinder. • Fast and accurate temperature measurement by the sensor immersed in the water.Installation • Very quick installation with the improved PROFI-RAPID installation system. • Straightforward replace-ment for all standard small water heaters. • The universal mounting rail compensates for any unevenness in the wall and drill hole discrepancies and is suitable for commonly used fixing points. • Metal threaded water fittings for secure replacement. • Any excess power cable can be housed in the practical cable storage compartment in the appliance back panel.Safety • Long service life thanks to robust copper tubular heater with low surface load. • Safe commissioning for all 2 kW appliances with resettable high limit safety cut-out. • Anti-scalding protection can be activated by mechanical temperature limiting. • For the earth conductor test, simply remove the rotary selector, so the test point is always accessible.SNO 5 Plus (GB) SNO 5 Plus (GB) SNO 10 Plus (GB)Part number 204979 204984Price excl. VAT £ 176.00 235.00 Specification Connected load kW 2 2Rated output 2 kW 2,0 2,0Power supply 1/N/PE 1/N/PERated voltage V 230 230Fuse protection 2 A 10 10Frequency Hz 50-60 50-60Energy efficiency class A AStandby energy consump-tion/24 h at 65 °CkWh 0.07 0.27Nominal capacity l 5 10Mixed water amount at 40 °C l 9,3 19Temperature setting range °C 35 - 85 35 - 85Version Small water heater Small water heaterType open openInstallation type Oversink OversinkWith tap - -Colour white whiteCable length m 0,9 0,9Operation manual manual

Product information 2024 - Subject to technical modifications.Small water heaters, non-pressurisedOversink51 SNO 5 Plus (GB) SNO 10 Plus (GB)Temperature limit • •IP rating IP 24 D IP 24 DHeight mm 423 505Width mm 240 290Depth mm 212 282Weight kg 3.00 4.60Installation template in the operating instructions. Installation template (Product: 204984)Oversink version incl. inlet valve and outlet pipe (Product: 204979, 204984)SN 15 S GB Set ABenefits › Power cable for permanent connection, approx. 1m › WRAS compliant (GB version) › Rapid supply of domestic hot water with no waiting, thanks to non-pressurised operation › Appliance versions with 5, 10 or 15 litre cylinder volume. › Very low energy losses thanks to high grade thermal insulationApplication • These SN 5-15 appliances supply individual draw-off points with hot water, for example a washba-sin, kitchen sink or a single shower (SN 15). • The non-pressurised appliance for oversink installation is used with non-pressurised taps.Convenience features • Oversink water heaters heat the water directly at the draw-off point. This prevents the energy and water losses caused by long pipe runs, as well as circulation losses. Low energy losses thanks to high grade thermal insulation. • The appliances supply warm or hot water at any time. • Particularly accurate and fast temper-ature capture as the sensor of the temperature controller is immersed directly in the water. • Variable temperature selection via rotary selector; the temperature can be limited in 4 stages. • Automatic frost protection setting when the appliance is off. Heat-up signalled by indicator lamp. • The plastic inner cylinder made from polypropylene is equipped with high grade EPS thermal insulation for low energy losses.Installation • The PROFI-RAPID installation system ensures quick and straightforward installation. Easy replacement as suitable for commonly used fixing points. Simple wall mounting with universal mounting rail; an installation template is included in the standard delivery. • The metal threaded water fittings ensure secure connections. • Power cable for permanent connection. The practical cable storage compartment in the appliance back panel houses any excess power cable. • Protection rating IP 24 (splashproof).Safety • Robust copper tubular heater with low surface load for a long service life. • For safe commissioning, all 2 kW appliances have a resettable high limit safety cut-out. • With the SN 15, the high limit safety cut-out is equipped with a fuse. • Mechanical temperature limit as anti-scalding protection is possible in 2 stages.SN 15 SL GB SN 15 SL GBPart number 227682Price excl. VAT £ 301.00 Oversink version incl. inlet valve and outlet pipe (Product: 227682) 4

Product information 2024 - Subject to technical modifications.52

DHW cylinder Accessories for small water heaters and DHW cylinders, non-pressurisedProduct information 2024 - Subject to technical modifications.DHW cylinderAccessories for small water heaters and DHW cylinders, non-pressurised53Taps, undersink Accessories544

Accessories for small water heaters and DHW cylinders, non-pressurisedTaps, undersinkProduct information 2024 - Subject to technical modifications.Accessories for small water heaters and DHW cylinders, non-pressurisedTaps, undersink54WUT-KBenefits › Non-pressurised twin lever tap › Temperature and water volume can be selected separately › Easy care chrome plated surfaceDescription • The non-pressurised mixer tap with two rotary handles is combined with an open vented DHW cylin-der. • The tap is available as a washbasin or kitchen version. • The mixed water amount in the small water heater is optimally utilised. • The mixed water temperature and water volume are conveniently adjusted by means of two rotary handles.WUT-K WUT-K NEWPart number 205615Price excl. VAT £ 124.00 Specification Application SinkConnection Connection hosesInstallation type Monobloc mixer tapSurface chrome platedSpout reach mm 193Spout height mm 208 WST-WBenefits › Mixer tap › Non-pressurised version for washbasinsDescription • The non-pressurised, vented WST-W mixer tap is installed on the washbasin.WST-W parts kit SNU GB WST-W parts kit SNU GB Specification Application Small water heaterSurface ChromeSpout reach mm 129Spout height mm 142

Product information 2024 - Subject to technical modifications.Accessories for small water heaters and DHW cylinders, non-pressurisedTaps, undersink55TWS-WBenefits › Non-pressurised twin lever tap › Temperature and water volume can be selected separately › Easy-care chrome plated surface, plastic rotary handlesDescription • The non-pressurised mixer tap with a pivoting spout and two rotary handles is suitable for washbasins. • The mixed water temperature and water volume are conveniently adjusted by means of two rotary handles. • The mixed water amount in the small water heater is optimally utilised.TWS-W TWS-W NEWPart number 205613Price excl. VAT £ 75.00 Specification Application WashbasinConnection Connection hosesInstallation type Monobloc mixer tapSurface chrome platedSpout reach mm 150Spout height mm 172 MAE-KBenefits › Mono lever mixer tap › Non-pressurised tap for sinksDescription • MAE-K non-pressurised, vented mono lever mixer tap for installation on a kitchen sink.MAE-K MAE-K NEWPart number 205616Price excl. VAT £ 75.00 Specification Version non-pressurisedApplication SinkConnection Connection hosesInstallation type Monobloc mixer tapSurface ChromeSpout reach mm 222Spout height mm 150 4

Small water heaters, pressurised Application areasProduct information 2024 - Subject to technical modifications.Small water heaters, pressurisedApplication areas56 Nominal capacity l 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 SHC 10 GB Eltron SHC 15 GB l 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 SHU 5 SL GB Set AX l 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 SH 15 SL GB Set AX

DHW cylinder Small water heaters, pressurisedProduct information 2024 - Subject to technical modifications.DHW cylinderSmall water heaters, pressurised57Undersink SHC GB58SHU 5 SL GB Set AX60SH 15 SL GB Set AX61SHU 10 SL GB Set AX624

next page >Small water heaters, pressurised UndersinkProduct information 2024 - Subject to technical modifications.Small water heaters, pressurisedUndersink58SHC GBBenefits › Supplies multiple draw-off points via a pressurised connection › Enamelled pressure-tested steel inner cylinder › High energy efficiency thanks to optimum thermal insulation › Frost protection setting › Power cable for permanent connection, approx. 1m › Quick and easy installationApplication • These small water heaters supply multiple draw-off points that have a low DHW demand. • The pres-sure-tested, unvented appliances can be combined with commercially available pressure taps • They are suitable for undersink installation; they can only be installed with the appropriate safety valve.Convenience features • The small water heaters offer tailored solutions for decentralised group supply. They heat the water directly at the draw-off point, which prevents energy, water and circulation losses caused by long pipe runs. • The temperature is variably adjusted by means of a rotary selector. • The temperature controller uses a sen-sor installed directly in the water. • Low energy losses are ensured by the high grade EPS thermal insulation. • The appliance has a 2-stage temperature limit and an automatic frost protection setting. • A visual display indicates when the appliance is heating up.Installation • Quick and easy wall mounting is ensured by the PROFI-RAPID installation system. A universal mounting rail is included in the standard delivery as is the installation template. • Secure water connection thanks to metal threaded water fittings. Suitable safety valves available as accessories.Safety • The robust copper tubular heater is noted for its low surface load. • The pressure-tested steel inner cylinder is equipped with a magnesium anode. • Resettable high limit safety cut-out reset button. • The temperature can be limited mechanically in two stages to provide anti-scalding protection and childproofing. • The appliance is splash-proof to protection rating IP 24.SHC 10 GB Eltron SHC 10 GB Eltron SHC 15 GB DISCONT.PRODUCTDISCONT.PRODUCTPart number 235232 234407Price excl. VAT £ 274.00 315.00 Specification Rated output 2 kW 1,5 1,5Power supply 1/N/PE 1/N/PERated voltage V 230 230Fuse protection 2 A 10 10Frequency Hz 50/60 50/60Energy efficiency class A AStandby energy consump-tion/24 h at 65 °CkWh 0.48 0.49Nominal capacity l 10 15Mixed water amount at 40 °C l 15,3 23Temperature setting range °C 30-65 30-65Version Small water heater Small water heaterType closed closedInstallation type Undersink UndersinkWith tap - -Inner cylinder material Steel, enamelled Steel, enamelledColour white whiteCable length m 1 1Operation manual manualTemperature limit • •IP rating IP 24 D IP 24 DHeight mm 430 452

Product information 2024 - Subject to technical modifications.Small water heaters, pressurisedUndersink59 SHC 10 GB Eltron SHC 15 GBWidth mm 280 320Depth mm 270 318Weight kg 7.20 9.00 Required accessories Part number 236702Type UVK (SH/SHC)Description Safety assembly, pressure-testedPrice excl. VAT £ 201.00 Recommended accessories Part number 236701 Type UVK (SH/SHU/SHC) Description Safety assembly, pressure-tested Price excl. VAT £ 201.00 Safety valve enclosed loose (Product: 235232, 234407) 4

Product information 2024 - Subject to technical modifications.Small water heaters, pressurisedUndersink60SHU 5 SL GB Set AXBenefits › Quick DHW heating without delay › Matching safety assemblies as accessories › Low energy losses thanks to high grade thermal insulationApplication • These SHU cylinders can supply multiple draw-off points that have a low DHW demand. • The pres-sure-tested appliances for undersink installation can be combined with all commercially available pressure taps. • Installation with an appropriate safety assembly is required.Convenience features • The appliances are a tailored solution for decentralised group supply. • The DHW cylinders for undersink installation heat the water directly at the draw-off point. • Energy and water losses are prevented as there are no long pipe runs or circulation losses. • Low energy losses thanks to the high grade thermal insulation. • The SHU cylinders deliver warm or hot water at any time, as the temperature is captured by a temperature sensor immersed directly in the water. • Variable temperature selection via rotary selector; the temperature can also be limited in several stages. • The automatic frost protection setting is still active when the appliance is off. • Both the pressure-tested steel inner cylinders (SH 10, SH 15, SHU 10) and the pressure-tested copper inner cylinder (SHU 5) have high grade EPS thermal insulation.Installation • Quick and easy installation is ensured by the PROFI-RAPID installation system. Existing appliances can be easily replaced as the design is suitable for commonly used fixing points. • Secure threaded fitting thanks to metal threaded water fittings. • Suitable safety assemblies are available as accessories • The standard delivery includes a power cable for permanent connection. Any excess cable can be housed in the practical cable storage compartment in the appliance back panelSafety • The robust copper tubular heater is distinguished by its low surface load. • Resettable high limit safety cut-out reset button. • The appliance is splashproof (protection rating IP 24). • For anti-scalding protection, the temperature can be limited mechanically.SHU 5 SL GB Set AX SHU 5 SL GB Set AXPart number 227687Price excl. VAT £ 340.00 Specification Nominal capacity l 5 Recommended accessories Part number 236701Type UVK (SH/SHU/SHC)Description Safety assembly, pressure-testedPrice excl. VAT £ 201.00Installation template incl. pressure limiting valve and adaptor (Product: 227687)

Product information 2024 - Subject to technical modifications.Small water heaters, pressurisedUndersink61SH 15 SL GB Set AXBenefits › Supplies multiple draw-off points via a pressurised connection › Quick DHW heating without delay › Matching safety assemblies as accessoriesApplication • These SH cylinders are suitable for supplying multiple draw-off points with a low DHW demand. • The pressure-tested appliances for oversink installation can be combined with all commercially available pressure taps. • An appliance version with 3.3 kW connected load is available for quick heat-up. • An appropriate safety assembly is necessary for installation.Convenience features • Tailored solutions for decentralised group supply. The oversink water heater heats the water directly at the draw-off point. Energy and water losses due to long pipe runs are avoided. No circulation losses. Low energy losses thanks to high grade thermal insulation. • Warm or hot water available at any time. Temperature con-troller with temperature sensor immersed directly in the water. • Variable temperature selection via rotary selector; the temperature can also be limited in several stages. • The automatic frost protection setting is still active when the appliance is off. • An indicator lamp signals when the DHW cylinder is being heated up. • The pressure-tested steel inner cylinder is equipped with high grade EPS thermal insulation.Installation • Quick and easy installation is ensured by the PROFI-RAPID installation system. Existing appliances can be easily replaced as the design is suitable for commonly used fixing points. Wall mounting is facilitated by a universal mounting rail, which is included in the standard delivery. • For secure threaded fittings, the appliance has metal water fittings. • Suitable safety assemblies are available as accessories. • Power cable for permanent connection. Any excess cable can be housed in the practical cable storage compartment in the appliance back panel. • Protection rating IP 24 (splashproof).Safety • The robust copper tubular heater is distinguished by its low surface load. • Resettable high limit safety cut-out reset button. • For anti-scalding protection, the temperature can be limited mechanically.SH 15 SL GB Set AX SH 15 SL GB Set AXPart number 227692Price excl. VAT £ 433.00 Specification Nominal capacity l 15 Required accessories Part number 236702Type UVK (SH/SHC)Description Safety assembly, pressure-testedPrice excl. VAT £ 201.00incl. pressure limiting valve and adaptor (Product: 227692) 4

Product information 2024 - Subject to technical modifications.Small water heaters, pressurisedUndersink62SHU 10 SL GB Set AXBenefits › Incl. expansion valve › WRAS compliant (GB version) › Quick DHW heating without delay › Matching safety assemblies as accessories › Appliance versions with 5, 10 or 15 litre cylinder volume. › Low energy losses thanks to high grade thermal insulation › Power cable for permanent connection, approx. 1m › Electrical connection to any standard safety socket › Appliance versions with 5 or 10 litre cylinder volumeApplication • These pressure-tested small water heaters are suitable for providing DHW to multiple draw-off points with a low DHW demand. • The pressure-tested appliance for undersink installation can be used with all commercially available pressure taps. • Installation with an appropriate safety assembly is required.Convenience features • The small water heater is recommended as a demand-dependent solution for decentralised group supply. The appliance for undersink installation heats the water directly at the draw-off point, which prevents energy and water losses due to long pipe runs or circulation losses. • Thanks to the high grade thermal insulation, energy losses are low. • Warm or hot water is available at all times. • Temperature controller with temperature sensor immersed directly in the water. • Variable temperature selection via rotary selector. • 4-stage temperature limit and automatic frost protection setting when the appliance is off. • Heat-up signalled by indicator lamp.Installation • The Profi-Rapid installation system ensures quick and straightforward installation. Easy replacement as suitable for commonly used fixing points. Fast wall mounting with universal mounting rail. The installation template is included in the standard delivery. • Metal threaded water fittings make a secure water connection possible. • Suit-able safety assemblies are available as accessories. • The standard delivery includes a power cable for permanent connection. The practical cable storage compartment in the appliance back panel houses any excess power cable.Safety • The small water heater is equipped with a resettable high limit safety cut-out. • A 2-stage mechanical tem-perature limit can be activated as anti-scalding protection.SHU 10 SL GB Set AX SHU 10 SL GB Set AXPart number 227689Price excl. VAT £ 381.00 incl. undersink kit (SHU) (Product: 227689)

DHW cylinder Accessories for small water heaters, pressurisedProduct information 2024 - Subject to technical modifications.DHW cylinderAccessories for small water heaters, pressurised63Accessories Accessories644

Accessories for small water heaters, pressurisedAccessoriesProduct information 2024 - Subject to technical modifications.Accessories for small water heaters, pressurisedAccessories64UVKBenefits › Cold water control set for combination with small water heaters › Pressure-tested safety assemblyDescription • The cold water control set comprises a protective pipe strainer, pressure limiter, non-return valve, expansion overpressure valve, distributor and diaphragm expansion vessel.UVK (SH/SHU/SHC) UVK (SH/SHU/SHC) UVK (SH/SHC)Part number 236701 236702Price excl. VAT £ 201.00 201.00 Specification Max. permissible pressure MPa 1.20 1.20Safety valve response pressure MPa 0.60 0.60Pressure reducing valve • •Pressure reducing valve setting rangeMPa 0,3 0,3Drip water connection • •Water connection 15 mm 15 mmInstallation type Surface-mounted Surface-mounted

Product information 2024 - Subject to technical modifications.654

Wall mounted cylinder Application areasProduct information 2024 - Subject to technical modifications.Wall mounted cylinderApplication areas66 Nominal capacity l 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 SHZ 30 S (GB) SHZ 50 S (GB) SHZ 100 S (GB) SHZ 150 S (GB)

DHW cylinder Wall mounted cylinderProduct information 2024 - Subject to technical modifications.DHW cylinderWall mounted cylinder67Pressurised SHZ (GB)684

next page >Wall mounted cylinder PressurisedProduct information 2024 - Subject to technical modifications.Wall mounted cylinderPressurised68SHZ (GB)Benefits › Variable temperature setting via rotary selector › Simple maintenance with LED signal anode in the user interface › Electronic heat content indicator via LED indicator in the user interface › Suitable for single or dual circuit operation (connected to off-peak economy tariff) and for manual rapid heat-up operation › Very low energy losses thanks to high grade thermal insulation › The steel inner cylinder features a special directly applied enamel coating for a long service life › Quick and easy installation using mounting bracket, drilling template, caps and spacersApplication • These splashproof wall mounted cylinders supply DHW to multiple draw-off points, for example in the bathroom and kitchen. • The pressure-tested appliance can be combined with all commercially available pressure taps, can also supply a single draw-off point and can be used in single circuit, dual circuit or manual rapid heat-up operation.Convenience features • The temperature can be variably regulated and if required, limited in 3 stages for anti-scalding protection. • The available quantity of DHW is shown on the user interface by means of seven LED illuminated fields; an additional display indicates when the appliance is heating up. • For higher DHW demand, a rapid heat-up function can be activated with the Boost button.Efficiency • The high grade thermal insulation guarantees low energy losses. • At the end of its service life, the appliance can be dismantled in an environmentally responsible manner and recycled.Installation • Straightforward replacement of all standard wall mounted cylinders. • Suitable for installation in sys-tems with plastic, copper or stainless steel pipework. • Integral recessed grips provide a secure hold when carrying the appliance. • A useful installation template is included for marking out the drill holes and for pre-installation of the water connections. • Quick and straightforward wall mounting with the universal installation template. Also suitable for installation in corners. • Caps for the mounting bracket and spacers for protruding walls are included in the standard delivery. • Selectable connected load with removable strain relief for simplified installation. • The signal anode with immediately visible display indicates consumption level of the protective anode. The anode can be changed without removing the flange; the flanged immersion heater with unmistakable electrical flange mount connector can be easily removed. • Installation with: safety assembly, funnel and diaphragm expansion vessel. • The wall mounted cylinder is splashproof and can be easily drained using the drain valve with hose connection. • Descaling can be effectively and safely carried out through the flanged aperture.Safety • The universal flanged immersion heater makes the appliance suitable for single circuit, dual circuit or manual rapid heat-up operation. • The high quality protective anode has a consumption indicator on the user interface and an integral T&P valve. • The steel inner cylinder features a special directly applied „anticor“ enamel coating for a long service life. • The automatic frost protection function monitors the water temperature and protects the cylinder from freezing at low temperatures.SHZ 30 S (GB) SHZ 30 S (GB) SHZ 50 S (GB) SHZ 100 S (GB) SHZ 150 S (GB)Part number 232783 232784 232786 232788Price excl. VAT £ 1,050.00 1,090.00 1,129.00 1,235.00 Specification Connected load ~ 230 V kW 1-4 1-4 1-4 1-4Power supply 1/N/PE 1/N/PE 1/N/PE 1/N/PERated voltage V 230 230 230 230Frequency Hz 50 50 50 50Load profile S M L XLEnergy efficiency class B C C CStandby energy consump-tion/24 h at 65 °CkWh 0.52 0.60 0.94 1.19Nominal capacity l 30 50 100 150Mixed water amount at 40 °C l 50 80 133 229Temperature setting range °C 35-70 35-70 35-70 35-70Max. flow rate l/min 18 18 18 18Colour white white white white

Product information 2024 - Subject to technical modifications.Wall mounted cylinderPressurised69 SHZ 30 S (GB) SHZ 50 S (GB) SHZ 100 S (GB) SHZ 150 S (GB)IP rating IP 24 IP 24 IP 24 IP 24Height mm 846 816 1126 1521Width mm 410 510 510 510Depth mm 420 510 510 510Weight kg 22.90 27.60 39.50 52.00 4

Floor mounted cylinder Application areasProduct information 2024 - Subject to technical modifications.Floor mounted cylinderApplication areas70 Nominal capacity l 0 50 100 150 200 250300350 400 450 500 550 600 650 700 750 800 850 900 950 1000 ESH 120 F Trend GB ESH 150 F Trend GB ESH 180 F Trend GB ESH 210 F Trend GB ESH 250 F Trend GB ESH 300 F Trend GB

DHW cylinder Floor mounted cylinderProduct information 2024 - Subject to technical modifications.DHW cylinderFloor mounted cylinder71Electric floor mounted cylinders, pressurised ESH F Trend GB724

Floor mounted cylinder Electric floor mounted cylinders, pressurisedProduct information 2024 - Subject to technical modifications.Floor mounted cylinderElectric floor mounted cylinders, pressurised72ESH F Trend GBBenefits › High hot water convenience due to electric flanged immersion heaters › Durable and lightweight inner cylinder made from stainless steel › Low energy losses thanks to the high grade thermal insulation › Straightforward installation due to low weight, pre-installed components and height-adjustable feet › Space saving installation possible with optional mounting bracket – for example above the washing machineApplication • These pressure-tested electric floor mounted cylinders are suitable for providing DHW to multiple draw-off points in apartments of 30 m2 or more. • The unvented, pressure-tested appliances can be used with all commercially available pressure taps.Convenience features • The high level of hot water convenience is made possible by integral electric flanged immersion heaters. • The preferred temperature is variably selected and maintained at the level set on the controller. • Powerful performance makes it possible to supply hot water on demand even with smaller appliances – saving space in the installation room. • Unobtrusive connections for water and electricity. • The inner cylinder is made of stainless steel.Efficiency • Low energy losses thanks to high grade thermal insulation.Installation • Easy handling due to low weight. • Levelling with height-adjustable feet integrated into the floor mounted cylinder. • Quick and straightforward installation is ensured by the pre-installed T&P valves and the pre-installed valve combination for the inlet and outlet. • Space saving installation, even directly above the washing machine, is possible with an optional mounting bracket.Safety • Anti-scalding protection can be integrated through the internal temperature limit. • Resettable high limit safety cut-out reset button.ESH 120 F Trend GB ESH 120 F Trend GBESH 150 F Trend GBESH 180 F Trend GBESH 210 F Trend GBESH 250 F Trend GBESH 300 F Trend GBPart number 204791 204792 204793 204794 204795 204796Price excl. VAT £ 698.00 837.00 872.00 911.00 991.00 1,080.00 Specification Power supply 1/N/PE ~ 220-240 V1/N/PE 1/N/PE ~ 220-240 V1/N/PE ~ 220-240 V1/N/PE ~ 220-240 V1/N/PE ~ 220-240 VRated voltage V 240 240 240 240 240 240Load profile L L XL XL XL XLEnergy efficiency class C C C C C DStandby energy consump-tion/24 h at 65 °CkWh 1.03 1.27 1.42 1.56 1.75 2.04Nominal capacity l 111 143 164 193 242 280Mixed water amount at 40 °C l 152 183,7 209,2 275,3 332,6 384,2Temperature setting range °C 30-60 30-60 30-60 30-60 30-60 30-60Max. flow rate l/min 15 15 15 15 15 15Flanged immersion heater version Single circuit Single circuit Single circuit Single circuit Single circuit Single circuitColour white white white white white whiteIP rating IP 21 IP 21 IP 21 IP 21 IP 21 IP 21Height mm 870 1050 1160 1300 1550 1750Width mm 575 575 575 575 575 575Depth mm 575 575 575 575 575 575Weight, empty kg 37 42 47 52 59 65

DHW cylinder Accessories for floor mounted cylinders, pressurisedProduct information 2024 - Subject to technical modifications.DHW cylinderAccessories for floor mounted cylinders, pressurised73Electric threaded immersion heaters and flanged immersion heaters Accessories744

next page >Accessories for floor mounted cylinders, pressurisedElectric threaded immersion heaters and flanged immersion heatersProduct information 2024 - Subject to technical modifications.Accessories for floor mounted cylinders, pressurisedElectric threaded immersion heaters and flanged immersion heaters74FCRBenefits › Replaceable copper heating element › For matching to individual usage scenarios › High hot water convenience thanks to powerful heating elements › Variable temperature setting via rotary selectorDescription • The flanged immersion heaters are suitable for horizontal installation in unvented DHW cylinders with flange connectors to DIN 4805. • The temperature can be variably adjusted. It is possible to limit the temperature. • Please note the details supplied by the cylinder manufacturer, as well as DIN 4753 and DIN 4751.FCR 21/60 FCR 21/60 FCR 21/120 FCR 28/120 E FCR 28/180 EPart number 071330 071331 000694 000695Price excl. VAT £ 1,011.00 958.00 1,083.00 1,095.00 Specification Connected load ~ 230 V kW 2-4 4 Connected load ~ 400 V kW 2-6 8/12 12 18Power supply 1/N/PE, 3/N/PE 1/N/PE, 2/N/PE, 3/PE 3/PE 3/PERated voltage V 230/400 230/400 400 400Coil voltage V 230 230 400 400Frequency Hz 50/60 50/60 50 50Version Dual/single circuit Single circuit Single circuit Single circuitIntegral contactor X - X XIP rating IP 24 IP 24 IP 24 IP 24Immersion depth mm 400 400 325 325Flange diameter mm 210 210 280 280 (Product: 000694)Temperature controller with frost protection setting (external), temperature limit possible, integral pushbutton for rapid heat-up, high limit safety cut-out, flange gasket, protective cover with two cable entries. Temperature controller with frost protection setting, high limit safety cut-out, flange gasket, protective cover with two cable entries. (Product: 000694, 000695) (Product: 000694)BGCBenefits › For matching to individual usage scenarios › High hot water convenience thanks to powerful heating elements › Variable temperature setting via rotary selectorApplication • This threaded immersion heater is suitable for sealed unvented heating systems and DHW heating systems. • The temperature can be variably adjusted; temperature limitation is possible. • The integral temperature controller is equipped with a high limit safety cut-out.BGC 6 kW 500 mm ET BGC 6 kW 500 mm ET BGC/45Part number 003769 075115Price excl. VAT £ 261.00 274.00

Product information 2024 - Subject to technical modifications.Accessories for floor mounted cylinders, pressurisedElectric threaded immersion heaters and flanged immersion heaters75 BGC 6 kW 500 mm ET BGC/45Specification Connected load ~ 230 V kW 2-5,7 2-5,7Connected load ~ 400 V kW 6 6Power supply 1/N/PE, 2/PE, 3/PE 1/N/PE, 2/PE, 3/PERated voltage V 230/400 230/400Frequency Hz 50/60 50/60Version Universal flange Universal flangeIP rating IP 44 IP 44Immersion depth mm 500 455 4

Product information 2024 - Subject to technical modifications.76

change me later 1 change me later 2Domestic hot water DHW heat pumpsProduct information 2024 - Subject to technical modifications.77DHW heat pumpsDomestic hot waterCompact DHW heat pumps 82DHW heat pump accessories 735

Product information 2024 - Subject to technical modifications.78

WWK-I 300 W PlusSplit SCompact KTypeTrendPlusPremiumClassificationDHW heat pumps WWTypeActive 1Passive 0DefrostingOutside AInside IPlace of Installation200 Litre 20300 Litre 30VolumeEnergy source via ductingEnergy source from unit locationKWFunctionProduct information 2024 - Subject to technical modifications.Domestic hot waterDHW heat pumps795

Compact DHW heat pumps Application areasProduct information 2024 - Subject to technical modifications.Compact DHW heat pumpsApplication areas80 Application limit heat source for heat pump operation °C -10 -5 0 5 10 15 20 25 30 35 40 45 WWK 302 H Set

DHW heat pumps Compact DHW heat pumpsProduct information 2024 - Subject to technical modifications.DHW heat pumpsCompact DHW heat pumps81Floorstanding WWK 222/302 (H)845

Compact DHW heat pumps FloorstandingProduct information 2024 - Subject to technical modifications.Compact DHW heat pumpsFloorstanding82WWK 222/302 (H)Benefits › Suitable for indoor installation (recirculation air mode) › High available mixed water amount and hygienic DHW temperatures > 61 °C in heat pump mode › Categorised in the highest possible energy efficiency class for water heaters › Permanently high efficiency and safety across the entire service life of the appliance, due to spring-loaded roll-bond heat exchanger › Reduced operating costs via intelligent interface to increase consumption of on-site photovoltaic energy › Display of the currently available mixed water amount via the LCD screen › Highly reliable and cost saving due to the impressed current anode integrated as standard › Very quiet operation due to sound-insulated compressor and positioning away from the air flow › Includes temperature and pressure safety valve (T&P valve)Application • This compact DHW heat pump efficiently supplies DHW to multiple draw-off points. • Can also be installed indoors in recirculation air mode. • Quick and easy installation: no settings necessary; the DHW setpoint is preset.Convenience features • The robust appliance is noted for its long service life. Contributing to this are the stove enam-elled metal casing and the refrigerant circuit assemblies which are insulated from the air stream. • The sophisticated draw-off profiles ensure a very high level of hot water convenience. • Heat pump-only mode enables very high volumes of mixed water to be achieved, in addition to hygiene-promoting water temperatures. • The electronic controller shows the currently available amount of mixed water on an LCD screen. The display is protected by a weatherproof cover. • Quiet operation thanks to compressor being sound-insulated from the air stream. • Reliable and cost saving due to the factory-fitted integral impressed current anode. A temperature and pressure safety valve (T&P valve) is included in the standard delivery.Efficiency • This has energy efficiency class A. Contributing to this is the spring-loaded roll-bond heat exchanger which ensures efficiency and safety throughout the entire service life of the appliance.WWK 302 H Set WWK 302 H SetPart number 236467Price excl. VAT £ 3,823.00 Specification Nominal load profile (EN 16147) XLHeight x diameter mm 1905 x 690Weight kg 135Nominal capacity l 302COP (EN 16147 / A20) 2,91Maximum available nominal amount of DHW at 40 °C (EN 16147 / A20)l 457Average sound pressure level at 1 m distance, free fielddB(A) 45Sound power level (EN 12102) dB(A) 56Min./max. application limits, heat source for heat pump operation°C -5/+42Max. DHW temperature with heat pump°C 65Power supply 1/N/PE 220-240 V 50/60 HzSafety valve connection Rp 3/4239554 WWK Kit (Product: 236467)Energy efficiency class in accordance with EU Regulation no. 812/2013

DHW heat pumps DHW heat pump accessoriesProduct information 2024 - Subject to technical modifications.DHW heat pumpsDHW heat pump accessories83Installation accessories Accessories845

DHW heat pump accessories Installation accessoriesProduct information 2024 - Subject to technical modifications.DHW heat pump accessoriesInstallation accessories84BGCBenefits › For matching to individual usage scenarios › High hot water convenience thanks to powerful heating elements › Variable temperature setting via rotary selectorApplication • This threaded immersion heater is suitable for sealed unvented heating systems and DHW heating systems. • The temperature can be variably adjusted; temperature limitation is possible. • The integral temperature controller is equipped with a high limit safety cut-out.BGC 6 kW 500 mm ET BGC 6 kW 500 mm ET BGC/45Part number 003769 075115Price excl. VAT £ 261.00 274.00 Specification Connected load ~ 230 V kW 2-5,7 2-5,7Connected load ~ 400 V kW 6 6Power supply 1/N/PE, 2/PE, 3/PE 1/N/PE, 2/PE, 3/PERated voltage V 230/400 230/400Frequency Hz 50/60 50/60Version Universal flange Universal flangeIP rating IP 44 IP 44Immersion depth mm 500 455

change me later 1 change me later 2Air source heat pumpsProduct information 2024 - Subject to technical modifications.Air source heat pumps85Heat pumpsAir source heat pumps, outdoor installation – inverter 90Accessories for air source heat pumps installed outdoors 1146

Product information 2024 - Subject to technical modifications.86

WPL-A 07.2 HK 230 PremiumSingle-phase 230Three-phase 400Power supplyHeat pump WPDevice typeOutdoor AIndoor IPlace of installation.2Version counterAir LGround EWater WSourceTrendPlusPremiumClassificationat A-7/W35 or B0/W35 integerHeat outputDuo (Integral DHW cylinder) WVentilation LCooling KHeatng HFree field FCorner installation ESound-optimized dBFunctionProduct information 2024 - Subject to technical modifications.Heat pumps87Air source heat pumps6

Air source heat pumps, outdoor installation – inverterApplication areasProduct information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterApplication areas88 Heating Cooling kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 WPL-A 07 HK 230 Premium kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 WPL 25 ACS kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 HPA-O 8 CS Plus int

Air source heat pumps Air source heat pumps, outdoor installation – inverterProduct information 2024 - Subject to technical modifications.Air source heat pumpsAir source heat pumps, outdoor installation – inverter89Inverter WPL-A 05/07 HK Premium90WPL-A 05/07 Premium Pack HSBC 20094WPL-A 05/07 Premium Pack HSBC 30095WPL-A 05/07 Premium Pack 996WPL-A 07 HK Premium Compact Set97WPL 20/25 AC99WPL 25 ACS Compact Set103WPL Plus Pack 1104WPL Plus Pack 2105WPL Plus Pack 3106WPL Plus Pack 4107HPA-O 8 CS Plus int Compact Set108HPA-O 3-8 Plus int1096

next page >Air source heat pumps, outdoor installation – inverterInverterProduct information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter90WPL-A 05/07 HK PremiumBenefits › The air source heat pump for heating and cooling is installed outdoors › Inverter technology allows ideally matched heating output through the variable speed compressor › Suitable for energy modernisation projects, as the high supply flow temperature is available all year round › Quiet operation thanks to encapsulated refrigerant circuit and variable matched fan speed › High efficiency and low operating costs all year round, thanks to optimally matched components › Can be integrated into the home network and operated via a smartphone › Futureproof and eco-friendly refrigerant with high efficiencyApplication • This air source heat pump with output-dependent control and inverter technology is designed as a compact mono block appliance for outdoor installation. It delivers the required heating output, ensures a reliable supply of domestic hot water and can be used for efficient cooling through circuit reversal. • A flow temperature of up to 75 °C is available for heating mode and DHW heating. Protection against legionella is ensured without the need for an electric auxiliary heater. • The heat pump can also be used to heat older buildings via radiators, as a flow temperature of 55 °C can still be achieved even when there is a heavy frost (-25 °C outside temperature).Convenience features • Very quiet operation is made possible by the encapsulated refrigerant circuit and acoustically isolated compressor. Contributing to the low sound power level are the modulating fan and the wide gaps between the evaporator fins which reduce air resistance. • High DHW temperatures are assured without the need for electric backup, even in the winter; this is because the heat pump works with high flow temperatures all year round. • The system can be integrated into a home network and controlled from a mobile device. For this, the on-site heat pump manager is combined with the Internet Service Gateway. With integral heat and electricity metering via refrigerant circuit data. • Mono energetic operation is possible thanks to the integral electric emergency/auxiliary heater. • The enamelled, corrosion-protected metal casing is made from hot-dip galvanised, powder coated sheet steel. Fan grille, recessed grips and cover are made from weatherproof and UV-resistant plastic.Efficiency • The refrigerant circuit works with the eco-friendly, futureproof refrigerant R454C. When combined with the optimally matched components, highly efficient operation is possible all year round. This efficiency is helped by demand-dependent defrosting via circuit reversal and the heating of the condensate pan via the refrigerant circuit. The hydrophilic coating on the fan nozzle prevents ice from forming, meaning that no electric heating is required.Installation • The integral anti-vibration mount enables the heat pump to be connected directly to the heating sys-tem. • Simplified installation thanks to pivoting electrical connection panel. • Quick access to the condensate pan is possible via the cleaning aperture on the back of the casing.WPL-A 07 HK 230 Premium Specification Energy efficiency class, heat pump W35 A+++Energy efficiency class, heat pump W55 A+++Energy efficiency class, com-posite system (heat pump + controller) W35 A+++Energy efficiency class, com-posite system (heat pump + controller) W55 A+++Heating output at A7/W35 (EN 14511)kW 3.31Heating output at A2/W35 (EN 14511)kW 4.30Heating output at A-7/W35 (EN 14511)kW 6.87COP at A7/W35 (EN 14511) 5.42COP at A2/W35 (EN 14511) 4.30

Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter91COP at A-7/W35 (EN 14511) 2.93Max. cooling capacity at A35/W7kW 7.30Cooling capacity at A35/W18 partial loadkW 4.94Max. cooling capacity at A35/W18kW 10.15Energy efficiency ratio at A35/W7 max. 2.35Energy efficiency ratio at A35/W18 partial load 4.28Energy efficiency ratio at A35/W18 max. 2.87SCOP 35 °C (EN 14825) 4.88Sound power level (EN 12102) dB(A) 48Min./max. application limits for heat source°C -25/40Max. application limit on the heating side°C 75Height mm 900Width mm 1270Depth mm 593Weight kg 135Rated voltage, compressor V 230Rated voltage, emergency/aux-iliary heaterV 230Refrigerant R454C Required accessories Part number 234727Type WPMDescription Heat pump manager in wall mounted enclosurePrice excl. VAT £ 575.00 Recommended accessories Part number 229336Type ISG webDescription Internet Service GatewayPrice excl. VAT £ 871.00Part number 233623Type AS-WP 2Description Hydraulic connection setPrice excl. VAT £ 111.00Part number 234722Type WK 2Description Wall mounting bracketPrice excl. VAT £ 480.00 DHW cylinder Part number 202923Type SBB 300-1 Plus GBDescription DHW cylinderPrice excl. VAT £ 1,459.00Part number 236917Type HSBC 200 S (GB) SetDescription Integral cylinderPrice excl. VAT £ 3,650.00 6

Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter92 15710082176e02e01d47d46410100490d451270116090070593g01 g02D0000034131.ai WPL-A 07 HK 230 Premiumd45 Condensate drain mm 29.6d47 Drain •e01 Heating flow Plug-in connectione01 Heating flow mm 28e02 Heating return Plug-in connectione02 Heating return mm 28g01 Air intake •g02 Air discharge •

Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter93 ≥2000≥500≥500≥300≥800Minimum clearance diagramD0000028299.ai ≥300≥300≥250≥250122D0000078120.ai6

next page >Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter94 ≥500≥500≥500D0000078118.ai ≥300≥300D0000078119.aiWPL-A 05/07 Premium Pack HSBC 200Benefits › Air source heat pump set for maximum efficiency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high flow tempera-tures all year round › DHW cylinder and buffer cylinder with integral hydraulic components including heat pump manager for heat pumps and heating circuit connection in a single casing › Thanks to flow separation, the heating system can be integrated easily and very safelyApplication • This mono block heat pump with output-dependent control and highly integrated indoor module is suitable for fast, space saving installation. • Flow temperatures of up to 75 °C are available for room heating and DHW heating. • It can be used in a wide range of different heat distribution systems, as the heat pump is separated from the heat distribution system by means of an integral buffer cylinder. • The indoor module contains the following components: DHW cylinder, cylinder charging pump, circulation pump, 3/2-way diverter valve, safety valve, electric emergency/auxiliary heater and the heat pump manager, which is used to control the system.WPL-A Premium Pack 7Set components WPL-A Premium Pack 71 Type WPL-A 07 HK 230 Premium Qty 1 Air source heat pump Page 80

next page >Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter95Set components WPL-A Premium Pack 72 Type HSBC 200 S (GB) Set Qty 1 Integral cylinder Page 1473 Type FET Qty 1 Digital remote control Page 1314 Type ISG web Qty 1 Internet Service Gateway Page 1305 Type FS-WP 28 Qty 1 Filter sets Page 121Further information about the set components can be found under therespective product. WPL-A 05/07 Premium Pack HSBC 300Benefits › The integral WPM heat pump manager makes the system easier to install › Air source heat pump set for maximum efficiency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high flow tempera-tures all year round › DHW cylinder and buffer cylinder with integral hydraulic components including heat pump manager for heat pumps and heating circuit connection in a single casingApplication • This mono block heat pump with output-dependent control, with highly integrated indoor module, is suitable for fast, space saving installation. • Flow temperatures of up to 75 °C are available for room heating and DHW heating. • High hot water convenience. • It can be used in a wide range of different heat distribution systems, as the heat pump is separated from the heat distribution system by means of an integral buffer cylinder. • The indoor module also contains the following components: DHW cylinder, cylinder charging pump, circulation pump, 3/2-way diverter valve, electric emergency/auxiliary heater and the heat pump manager, which is used to control the system.WPL-A Premium Pack 8Set components WPL-A Premium Pack 81 Type WPL-A 07 HK 230 Premium Qty 1 Air source heat pump Page 802 Type HSBC 300 cool (GB) Set Qty 1 Integral cylinder Page 1463 Type FET Qty 1 Digital remote control Page 1314 Type ISG web Qty 1 Internet Service Gateway Page 1306

next page >Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter96Set components WPL-A Premium Pack 85 Type FS-WP 28 Qty 1 Filter sets Page 121Further information about the set components can be found under therespective product. WPL-A 05/07 Premium Pack 9Benefits › Air source heat pump set for maximum efficiency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high flow tempera-tures all year round › Separate buffer cylinder for separation of flow rates for maximum operational reliability › High hot water convenience due to separate DHW cylinderApplication • This mono block heat pump with output-dependent control is combined with a separate buffer cylinder and a DHW cylinder. • Flow temperatures of up to 75 °C are available for room heating and DHW heating. • The wall mounted heat pump manager controls the appliance. • Flow separation is achieved by means of the buffer cylinder. • An insulated pump assembly supplies the heat distribution system.WPL-A Premium Pack 9Set components WPL-A Premium Pack 91 Type SBP 100 Plus Qty 1 Buffer cylinder Page 1682 Type WPL-A 07 HK 230 Premium Qty 1 Air source heat pump Page 803 Type SBB 300-1 Plus GB Qty 1 DHW cylinder Page 1594 Type WPM Qty 1 Heat pump manager in wall mounted enclosure Page 1285 Type UP 25/7.5 PCV Qty 1 Heating circuit pump Page 1816 Type FET Qty 1 Digital remote control Page 1317 Type FS-WP 28 Qty 1 Filter sets Page 121Further information about the set components can be found under the respective product.

next page >Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter97WPL-A 07 HK Premium Compact SetBenefits › Air source heat pump set for maximum efficiency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high flow tempera-tures all year round › Large DHW cylinder and buffer cylinder with integral hydraulic components for heat pumps and heating circuit connection in a single casing › Including heat pump manager › Thanks to flow separation, the heating system can be integrated easily and very safelyApplication • This mono block heat pump with output-dependent control, with highly integrated indoor module, is suitable for fast, space saving installation. • Flow temperatures of up to 75 °C are available for room heating and DHW heating. • It can be used in a wide range of different heat distribution systems, as the heat pump is separated from the heat distribution system by means of the buffer cylinder in the integral cylinder. • The indoor module also contains the following components: DHW cylinder, cylinder charging pump, circulation pump, 3/2-way diverter valve, safety valve and the heat pump manager for controlling the system. WPL-A 07 HK Premium Compact Set NEWPart number 206044Price excl. VAT £ 9,900.00ABA BABAB21Set components WPL-A 07 HK Premium Compact Set1 Type WPL-A 07 HK 230 Premium Qty 1 Air source heat pump Page 802 Type HSBC 225 S 1 Qty 1 Integral cylinder Page 1493 Type ISG web Qty 1 Internet Service Gateway Page 130WPL-A 07 HK Premium Compact Set6

Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter98Set components WPL-A 07 HK Premium Compact Set4 Type FS-WP 28 Qty 1 Filter sets Page 1215 Type FET Qty 1 Digital remote control Page 131Further information about the set components can be found under therespective product.

next page >Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter99WPL 20/25 ACBenefits › The air source heat pump for heating and cooling is installed outdoors › Inverter technology allows ideally matched heating output through the variable speed compressor › Even at low outside temperatures, the enhanced vapour injection/enhanced saturated vapour injection of the heat pump achieves a high flow temperature › Quiet operation thanks to encapsulated refrigerant circuit and variable matched fan speed › Improved room climate in summer with active cooling using circuit reversal › High efficiency and low operating costs all year round, thanks to optimally matched components › Low operating costs as mono mode DHW heating is possible › Can be integrated into the home network and operated via a smartphoneApplication • This air source heat pump with output-dependent control and inverter technology is installed outdoors. The compact mono block design is suitable for heating and DHW operation as well as for efficient cooling by means of circuit reversal. • Can be used in modernisation projects as flow temperatures of up to 65 °C are available all year round for room heating and DHW heating.Convenience features • Both the encapsulated refrigerant circuit and the acoustically isolated compressor make for quiet operation. The modulating fan and the wide gaps between the evaporator fins, which reduce air resistance, also contribute to the low sound power level. • The combined enhanced vapour injection/enhanced saturated vapour injection cools the scroll compressor at low outside temperatures and achieves a higher heating output/flow temper-ature. When combined with the Internet Service Gateway, the integral heat pump manager allows the system to be controlled in the home network or from a mobile device. With integral heat and electricity metering via refrigerant circuit data. • The electric emergency/auxiliary heater enables mono energetic operation. • The refrigerant circuit is hermetically sealed, tested for leaks at the factory and filled with safety refrigerant R410A. • The enamelled, corro-sion-protected metal casing is made from hot-dip galvanised, powder coated sheet steel. Fan grille, recessed grips and cover are made from weatherproof and UV-resistant plastic.Efficiency • The waste heat from the inverter is used to raise the return temperature. In addition, the overall effi-ciency of the system is increased by on-demand defrosting through circuit reversal and heating of the condensate pan by the refrigerant circuit. • The hydrophilic coating on the fan nozzle prevents ice from forming, meaning that no electric heating is required.Installation • The integral anti-vibration mount enables the heat pump to be connected directly to the heating system. • The pivoting electrical connection panel makes installation easier. • The condensate pan can be easily reached through a cleaning aperture on the back of the casing.WPL 25 ACS Specification Energy efficiency class, heat pump W35 A+++Energy efficiency class, heat pump W55 A++Energy efficiency class, com-posite system (heat pump + controller) W35 A+++Energy efficiency class, com-posite system (heat pump + controller) W55 A++Heating output at A7/W35 (EN 14511)kW 8.00Heating output at A2/W35 (EN 14511)kW 8.33Heating output at A-7/W35 (EN 14511)kW 12.86COP at A7/W35 (EN 14511) 4.82COP at A2/W35 (EN 14511) 4.146

Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter100COP at A-7/W35 (EN 14511) 2.98Max. cooling capacity at A35/W7kW 14.88Cooling capacity at A35/W18 partial loadkW 6.76Max. cooling capacity at A35/W18kW 17.06Energy efficiency ratio at A35/W7 max. 2.38Energy efficiency ratio at A35/W18 partial load 3.76Energy efficiency ratio at A35/W18 max. 2.83SCOP 35 °C (EN 14825) 4.53Sound power level (EN 12102) dB(A) 55Min./max. application limits for heat source°C -20-40Max. application limit on the heating side°C 65Height mm 1045Width mm 1490Depth mm 593Weight kg 175Rated voltage, compressor V 230Rated voltage, emergency/aux-iliary heaterV 230Refrigerant R410A Required accessories Part number 234727Type WPMDescription Heat pump manager in wall mounted enclosurePrice excl. VAT £ 575.00 Recommended accessories Part number 229336Type ISG webDescription Internet Service GatewayPrice excl. VAT £ 871.00Part number 233623Type AS-WP 2Description Hydraulic connection setPrice excl. VAT £ 111.00Part number 233826Type HMS TrendDescription Hydraulic modulePrice excl. VAT £ 2,722.00Part number 234722Type WK 2Description Wall mounting bracketPrice excl. VAT £ 480.00 DHW cylinder Part number 236917Type HSBC 200 S (GB) SetDescription Integral cylinderPrice excl. VAT £ 3,650.00

Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter101 14901045410100157100821765931380490e02e01d47g01 g02d45d46D0000028296.ai WPL 25 ACSd45 Condensate drain mm 22d47 Drain •e01 Heating flow Plug-in connectione01 Heating flow mm 28e02 Heating return Plug-in connectione02 Heating return mm 28g01 Air intake •g02 Air discharge •6

Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter102 ≥2000≥500≥500≥300≥800Minimum clearance diagramD0000028299.ai ≥300≥300≥250≥250122D0000078120.ai ≥500≥500≥500D0000078118.ai

next page >Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter103 ≥300≥300D0000078119.aiWPL 25 ACS Compact SetBenefits › Air source heat pump set for maximum efficiency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high flow tempera-tures all year round › DHW cylinder and buffer cylinder with integral hydraulic components including heat pump manager for heat pumps and heating circuit connection in a single casing › Including heat pump manager › Thanks to flow separation, the heating system can be integrated easily and very safelyApplication • This mono block heat pump with output-dependent control and highly integrated indoor module is suitable for fast, space saving installation. • Flow temperatures of up to 75 °C are available for room heating and DHW heating. • It can be used in a wide range of different heat distribution systems, as the heat pump is separated from the heat distribution system by means of the buffer cylinder of the indoor integral cylinder. • The indoor module contains the following components: DHW cylinder, cylinder charging pump, circulation pump, 3/2-way diverter valve, safety valve and the heat pump manager for controlling the system.Set components WPL 25 ACS Compact Set1 Type WPL 25 ACS Qty 1 Air source heat pump Page 892 Type HSBC 225 S 1 Qty 1 Integral cylinder Page 1493 Type FET Qty 1 Digital remote control Page 131WPL 25 ACS Compact Set6

Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter104Set components WPL 25 ACS Compact Set4 Type ISG web Qty 1 Internet Service Gateway Page 1305 Type FS-WP 28 Qty 1 Filter sets Page 121Further information about the set components can be found under therespective product. WPL Plus Pack 1Benefits › Air source heat pump set for maximum efficiency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high flow tempera-tures all year round › DHW cylinder and buffer cylinder with integral hydraulic components including heat pump manager for heat pumps and heating circuit connection in a single casing › Thanks to flow separation, the heating system can be integrated easily and very safely › Optional active cooling by reversing the refrigerant cycleApplication • This mono block heat pump with output-dependent control, with highly integrated indoor module, is suitable for fast, space saving installation. • It can be used for modernisation projects, since flow temperatures of up to 65 °C are available all year round for room heating and DHW heating. • It can be used in a wide range of different heat distribution systems, as the heat pump is separated from the heat distribution system by means of an integral buffer cylinder. • The compact design is suitable for heating and DHW operation as well as for efficient cooling by means of circuit reversal. • The indoor module also contains the following components: DHW cylinder, cylinder charging pump, circulation pump, 3/2-way diverter valve, safety valve, electric emergency/auxiliary heater and the heat pump manager, which is used to control the system.WPL Plus Pack 1Set components WPL Plus Pack 11 Type WPL 25 ACS Qty 1 Air source heat pump Page 892 Type HSBC 200 S (GB) Set Qty 1 Integral cylinder Page 1473 Type FET Qty 1 Digital remote control Page 1314 Type ISG web Qty 1 Internet Service Gateway Page 1305 Type FS-WP 28 Qty 1 Filter sets Page 121More details regarding set contents can be found under the relevant product 

Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter105WPL Plus Pack 2Benefits › Large DHW cylinder and buffer cylinder with integral hydraulic components for heat pumps and heating circuit connection in a single casing › The integral WPM heat pump manager makes the system easier to install › Air source heat pump set for maximum efficiency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high flow tempera-tures all year round › Optional active cooling by reversing the refrigerant cycleApplication • This mono block heat pump with output-dependent control and highly integrated indoor module is suitable for fast, space saving installation. It can be used for modernisation projects, as flow temperatures of up to 65 °C are available all year round for room heating and DHW heating. • High DHW convenience. • It can be used in a wide range of different heat distribution systems, as the heat pump is separated from the heat distribution system by means of an integral buffer cylinder. • The compact design is suitable for heating and DHW operation as well as for efficient cooling by means of circuit reversal. • The indoor module also contains the following components: DHW cylinder, cylinder charging pump, circulation pump, 3/2-way diverter valve, electric emergency/auxiliary heater and the heat pump manager, which is used to control the system.WPL Plus Pack 2Set components WPL Plus Pack 21 Type WPL 25 ACS Qty 1 Air source heat pump Page 892 Type HSBC 300 cool (GB) Set Qty 1 Integral cylinder Page 1463 Type FET Qty 1 Digital remote control Page 1314 Type ISG web Qty 1 Internet Service Gateway Page 1305 Type FS-WP 28 Qty 1 Filter sets Page 121Further information about the set contents can be found under therespective product 6

Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter106WPL Plus Pack 3Benefits › Separate buffer cylinder for separation of flow rates for maximum operational reliability › High hot water convenience due to separate DHW cylinder › Air source heat pump set for maximum efficiency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high flow tempera-tures all year round › Optional active cooling by reversing the refrigerant cycleApplication • This mono block heat pump with output-dependent control delivers high flow temperatures all year round in combination with a separate buffer cylinder and DHW cylinder. • The compact design is suitable for heating and DHW operation as well as for efficient cooling by means of circuit reversal. • The wall mounted heat pump man-ager controls the appliance. • A buffer cylinder for separating the flows is included. • The heat distribution system is supplied via an insulated pump assembly.WPL Plus Pack 3Set components WPL Plus Pack 31 Type WPL 25 ACS Qty 1 Air source heat pump Page 892 Type SBB 302 WP (GB) Set Qty 1 DHW cylinder Page 1583 Type SBP 100 Plus Qty 1 Buffer cylinder Page 1684 Type WPM Qty 1 Heat pump manager in wall mounted enclosure Page 1285 Type UP 25/7.5 PCV Qty 2 Heating circuit pump Page 1816 Type FET Qty 1 Digital remote control Page 1317 Type ISG web Qty 1 Internet Service Gateway Page 130Further information about the set contents can be found under therespective product 

Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter107WPL Plus Pack 4Benefits › Separate buffer cylinder for separation of flow rates for maximum operational reliability › High hot water convenience due to separate DHW cylinder › Air source heat pump set for maximum efficiency in new build or modernisation › Mono block heat pump, with its variable speed compressors, ensures perfectly matched heating output and high flow tempera-tures all year round › Optional active cooling by reversing the refrigerant cycleApplication • This mono block heat pump with output-dependent control delivers high flow temperatures all year round and is delivered in combination with a separate buffer cylinder and a large DHW cylinder. • The compact design is suitable for heating and DHW operation as well as for efficient cooling by means of circuit reversal. • The wall mounted heat pump manager controls the appliance. • The buffer cylinder is used to separate the flows. • An insulated pump assembly supplies the heat distribution system.WPL Plus Pack 4Set components WPL Plus Pack 41 Type WPL 25 ACS Qty 1 Air source heat pump Page 892 Type STH 210 Plus Qty 1 Buffer cylinder Page 1683 Type SBB 302 WP (GB) Set Qty 1 DHW cylinder Page 1584 Type WPM Qty 1 Heat pump manager in wall mounted enclosure Page 1285 Type UP 25/7.5 PCV Qty 1 Heating circuit pump Page 1816 Type FET Qty 1 Digital remote control Page 1317 Type BBI 5-I Qty 1 Compact installation BBI 5 Page 1728 Type ISG web Qty 1 Internet Service Gateway Page 130Further information about the set contents can be found under therespective product  6

Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter108HPA-O 8 CS Plus int Compact SetBenefits › The air source heat pump is ideally suited to new builds › Simple operation through integrated heat pump manager › The mono block heat pump is installed outdoors and its variable speed compressor ensures perfectly matched heating output › Small footprint as just one indoor and outdoor unit is requiredApplication • This air source heat pump with output-dependent control is combined with an integral cylinder. The set includes the heat pump for outdoor installation, an internal integral cylinder and all the hydraulic connection components for the heating installation. • In addition to the integral cylinder, standard delivery also includes the circulation pump, 3/2-way diverter valve and safety valve. • Control is provided by the integral heat pump manager.Set components HPA-O 8 CS Plus int Compact Set1 Type HPA-O 8 CS Plus int Qty 1 Air source heat pump Page 992 Type HSBC 220 S 1 Qty 1 Integral cylinder Page 1493 Type FET Qty 1 Digital remote control Page 1314 Type ISG web Qty 1 Internet Service Gateway Page 130Further information about the set components can be found under therespective product. HPA-O 8 CS Plus int Compact Set

next page >Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter109HPA-O 3-8 Plus intBenefits › The air source heat pump for heating and cooling new-builds is installed outdoors › Inverter technology allows ideally matched heating output through the variable speed compressor › Reduced space requirement in installation room thanks to compact outdoor unit combined with various indoor modules › Quiet operation thanks to encapsulated refrigerant circuit and variable matched fan speed › Freezing up of the compressor and blocking of the condensate drain are prevented by means of an „anti-block condensate“ (ABC design) › Can be integrated into the home network and operated via a smartphone › High hot water convenience with large mixed water amount due to high flow temperature › Straightforward hydraulic connection due to integral anti-vibration mounts › The air source heat pump is ideally suited to new buildsApplication • This air source heat pump with output-dependent control and inverter technology is designed as a compact mono block appliance for outdoor installation. • The heat pump can be used in new build and buildings with a low system temperature for heating and DHW operation as well as for efficient cooling. • To ensure simple and space saving installation in the building, the heat pump is supplied in a set with compact and ideally matched indoor units.Convenience features • Quiet operation thanks to the encapsulated refrigerant circuit and acoustically isolated com-pressor. With integral heat and electricity metering via refrigerant circuit data.Efficiency • The waste heat from the inverter raises the return temperature which, together with demand-dependent defrosting by circuit reversal, significantly increases the overall efficiency of the system.Installation • Thanks to the integral anti-vibration mounts, the heat pump can be connected directly to the heat-ing system. Extensive accessories are available for both floor or wall mounted installations. This ensures that any condensate can drip off easily. • The electrical connection panel is easy to access, without having to open the unit.HPA-O 8 CS Plus intSpecification Energy efficiency class, heat pump W35 A+++Energy efficiency class, heat pump W55 A++Energy efficiency class, com-posite system (heat pump + controller) W35 A+++Energy efficiency class, com-posite system (heat pump + controller) W55 A++Heating output at A7/W35 (EN 14511)kW 4.86Heating output at A2/W35 (EN 14511)kW 5.73Heating output at A-7/W35 (EN 14511)kW 7.80COP at A7/W35 (EN 14511) 4.76COP at A2/W35 (EN 14511) 3.97COP at A-7/W35 (EN 14511) 2.92Max. cooling capacity at A35/W7kW 6.00Cooling capacity at A35/W18 partial loadkW 3.00Max. cooling capacity at A35/W18kW 6.00Energy efficiency ratio at A35/W7 max. 1.73Energy efficiency ratio at A35/W18 partial load 3.286

Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter110Energy efficiency ratio at A35/W18 max. 2.88SCOP 35 °C (EN 14825) 4.48Sound power level (EN 12102) dB(A) 57Min./max. application limits for heat source°C -20-40Max. application limit on the heating side°C 60Height mm 812Width mm 1152Depth mm 524Weight kg 91Rated voltage, compressor V 220Refrigerant R410A Recommended accessories Part number 229336Type ISG webDescription Internet Service GatewayPrice excl. VAT £ 871.00Part number 236693Type SK 2Description T-supportPrice excl. VAT £ 102.00Part number 238686Type WK 1.1Description Wall mounting bracketPrice excl. VAT £ 200.00 The necessary T-support or wall mounting bracket is available as an accessory. a10524a20504112192109189334410b01d45g01g02e02e01D0000057580.ai

Product information 2024 - Subject to technical modifications.Air source heat pumps, outdoor installation – inverterInverter111 HPA-O 8 CS Plus inta10 Appliance mm 812a20 Appliance mm 1,152b01 Entry electrical cables •d45 Condensate drain •e01 Heating flow mm 22e02 Heating return mm 22g01 Air intake •g02 Air discharge • ≥2000≥500≥500≥200≥300≥800Minimum clearance diagramD0000057581.ai6

Product information 2024 - Subject to technical modifications.112

Air source heat pumps Accessories for air source heat pumps installed outdoorsProduct information 2024 - Subject to technical modifications.Air source heat pumpsAccessories for air source heat pumps installed outdoors113Installation accessories Accessories1146

Accessories for air source heat pumps installed outdoorsInstallation accessoriesProduct information 2024 - Subject to technical modifications.Accessories for air source heat pumps installed outdoorsInstallation accessories114AS WPBenefits › Hydraulic connection set › Complete with two copper pipes, including 28-11/4inch adaptor › White painted coverDescription • The connection set for supply lines from the ground is supplied with a painted cover that protects against the elements.AS-WP 2 AS-WP 2Part number 233623Price excl. VAT £ 111.00 Specification Connection G 1 1/4 WKBenefits › Includes ribbon heater to keep condensate connection free from frost (Product: 234722)Description • The wall mounting brackets are made of corrosion-protected, zinc-plated steel. • Height-adjustable wall rails; the heat pump can be aligned with the aid of these appliance rails. • The set consists of two wall mounting brackets, which are supplied including anti-vibration mounts.WK 2 WK 2Part number 234722Price excl. VAT £ 480.00 Specification Weight load kg 175Heated length mm 2000Connecting of connecting cable mm 2000

Product information 2024 - Subject to technical modifications.Accessories for air source heat pumps installed outdoorsInstallation accessories115WK 1.1Benefits › 2 wall mounting brackets for installing a heat pump including anti-vibration mounts › Weight load max. 120kg › Support length: 750mm › Corrosion protection thanks to zinc-plated steelDescription • The wall mounting brackets are made of corrosion-protected, zinc-plated steel. • Height-adjustable wall rails; the heat pump can be aligned with the aid of these appliance rails. • The set consists of two wall mounting brackets, which are supplied including anti-vibration mounts.WK 1.1 WK 1.1Part number 238686Price excl. VAT £ 200.00 Specification Weight load kg 120    SK 2Benefits › Set with 2 robust brackets › Powder coated in white › Height: 303mm, width: 450mmDescription • The powder coated bracket allows the heat pump to be secured to a strip foundation. • The set consists of two supports incl. the screws for securing the heat pump.SK 2 SK 2Part number 236693Price excl. VAT £ 102.00 Specification Height mm 303Weight load kg 91 Standard delivery includes: 2 pce, incl. screws for securing the heat pump to the bracket. 6

Product information 2024 - Subject to technical modifications.116

Heat pumps Ground source and water source heat pumpsProduct information 2024 - Subject to technical modifications.Heat pumpsGround source and water source heat pumps117Ground source heat pumps – inverter 120Accessories for ground source heat pumps 1307

Ground source heat pumps – inverter Application areasProduct information 2024 - Subject to technical modifications.Ground source heat pumps – inverterApplication areas118 Heating Cooling kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 WPE-I 04 HW 230 GB Premium WPE-I 06 HW 230 GB Premium WPE-I 08 HW 230 GB Premium WPE-I 12 HW 230 GB Premium WPE-I 15 HW 230 GB Premium kW 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 WPE-I 04 HK 230 Premium WPE-I 06 HK 230 Premium WPE-I 08 HK 230 Premium WPE-I 12 HK 230 Premium WPE-I 15 HK 230 Premium kW 0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78 81 84 87 90 93 96 99 102 105 108 111 114 117 120 WPE-I 33 H 400 Premium WPE-I 44 H 400 Premium WPE-I 59 H 400 Premium WPE-I 87 H 400 Premium

Ground source and water source heat pumpsGround source heat pumps – inverterProduct information 2024 - Subject to technical modifications.Ground source and water source heat pumpsGround source heat pumps – inverter119Inverter WPE-I 04-15 HW 230 GB Premium120WPE-I 04-15 HW 230 GB Premium Pack122WPE-I 04-15 HK 230 Premium Pack123WPE-I 04-15 HK 230 Premium125WPE-I 33-87 H 400 Premium1277

next page >Ground source heat pumps – inverter InverterProduct information 2024 - Subject to technical modifications.Ground source heat pumps – inverterInverter120WPE-I 04-15 HW 230 GB PremiumBenefits › High hot water convenience and mono mode heating thanks to high flow temperatures of up to 75°C › Pressure monitoring in the heat source circuit with integral brine pressure switch › Quick, space saving installation thanks to built-in DHW cylinder and high level of integration › Inverter technology allows ideally matched heating output through the variable speed compressor › Very quiet operation thanks to the intelligent sound prevention concept including a number of anti-vibration mounts › Futureproof and eco-friendly refrigerant with high efficiency › Easy to transport as the refrigerant circuit and cylinder module can be separated from one another and are fitted with integral carrying handlesApplication • This ground source heat pump with output-dependent control and inverter technology is installed indoors. • The high level of integration simplifies installation whilst the small footprint means that it does not take up much space. • The heat pump can be used in modernisation projects as flow temperatures of up to 75 °C are avail-able all year round for room heating and DHW heating. • Mono mode is possible for both heating and DHW heating.Convenience features • Quiet operation, due to encapsulated refrigerant circuit and acoustically isolated compressor. • The integral heat pump manager ensures fully automatic, weather-compensated control of the heating system. Control via the home network or from a mobile device is possible via the optional Internet Service Gateway. With integral heat and electricity metering via refrigerant circuit data. • High level of integration: high efficiency circulation pumps and expansion vessels for the brine and heating side are included. Also integrated are the electric emergency/auxiliary heater for mono energetic operation and pasteurisation, the heating diverter valve for DHW heating and a safety valve with drain pipe. • The refrigerant circuit works with the eco-friendly and futureproof refrigerant R454C whose properties are optimised for use in heat pumps. • The corrosion-protected, enamelled metal casing is made from hot-dip galvanised, powder coated sheet steel. Efficiency • Optimum operation and high efficiency all year round thanks to the inverter and integral recuperator.Installation • Carrying handles are provided on the back panel for easy transport. No special safety precautions are required when siting. Only a minimum room size must be ensured. Internal pressure hoses enable direct hydraulic connection to the heating and brine circuits. For easy installation, the hydraulic connections are equipped with quick-release fittings and are thermally insulated.WPE-I 04 HW 230 GB Premium WPE-I 04 HW 230 GB PremiumWPE-I 06 HW 230 GB PremiumWPE-I 08 HW 230 GB PremiumWPE-I 12 HW 230 GB PremiumWPE-I 15 HW 230 GB PremiumPart number 202637 202638 202639 202640 202641Price excl. VAT £ 9,646.00 9,749.00 10,239.00 11,676.00 12,443.00 Specification Energy efficiency class, heat pump W35 A+++ A+++ A+++ A+++ A+++Energy efficiency class, heat pump W55 A+++ A+++ A+++ A+++ A+++Energy efficiency class, com-posite system (heat pump + controller) W35 A+++ A+++ A+++ A+++ A+++Energy efficiency class, com-posite system (heat pump + controller) W55 A+++ A+++ A+++ A+++ A+++Heating output at B0/W35 (EN 14511)kW 1,96 2,37 2,78 4,19 5,18Cylinder volume V l 175 175 175 162 162Heating output at B0/W35 (min./max.)kW 1,0-4,2 1,0-6,6 1,0-7,6 2,1-12,7 2,1 - 14,8COP at B0/W35 (EN 14511) 4.60 4.60 4.67 5.01 4.86SCOP 35 °C (EN 14825) 5.07 5.20 5.12 5.59 5.44Sound power level (EN 12102) dB(A) 43-46 43-48 43-48 43-49 43 - 49Height mm 1937 1937 1937 1937 1937Width mm 600 600 600 600 600

Product information 2024 - Subject to technical modifications.Ground source heat pumps – inverterInverter121 WPE-I 04 HW 230 GB PremiumWPE-I 06 HW 230 GB PremiumWPE-I 08 HW 230 GB PremiumWPE-I 12 HW 230 GB PremiumWPE-I 15 HW 230 GB PremiumDepth mm 703 703 703 703 703Nominal capacity l 175 175 175 162 162Weight kg 265 265 265 275 275Rated voltage, compressor V 230 230 230 230 230Rated voltage, emergency/aux-iliary heaterV 230 230 230 230 230Refrigerant R454C R454C R454C R454C R454CSurface area, heat exchanger m² 2.10 2.10 2.10 3.50 3.50Energy efficiency class, DHW heating with load profile XL A A A A A Recommended accessories Part number 229336 229336 229336 229336 229336Type ISG web ISG web ISG web ISG web ISG webDescription Internet Service GatewayInternet Service GatewayInternet Service GatewayInternet Service GatewayInternet Service GatewayPrice excl. VAT £ 871.00 871.00 871.00 871.00 871.00Part number 233307 233307 233307 233307 233307Type WPSF WPSF WPSF WPSF WPSFDescription WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit Price excl. VAT £ 306.00 306.00 306.00 306.00 306.00 More details regarding set contents can be found under the relevant product7

Product information 2024 - Subject to technical modifications.Ground source heat pumps – inverterInverter122 ≥500≥200≥1000≥50≥500Minimum clearance diagramD0000033992.aiWPE-I 04-15 HW 230 GB Premium PackBenefits › Mono mode operation possible for heating and DHW thanks to higher flow temperatures › Inverter technology allows ideally matched heating output through the variable speed compressor › Easy and time saving installation, due to high level of integration and inclusion of accessories › Easy to transport as the refrigerant circuit and cylinder module can be separated from one another and are fitted with integral carrying handles › Buffer cylinder to separate the flows for maximum operational reliabilityApplication • This compact ground source heat pump with output-dependent control and inverter technology is in-stalled indoors. It has an integral DHW cylinder and is combined with a separate buffer cylinder. • Thanks to the very high flow temperatures of up to 75 °C, the heat pump can be used in both new build and modernisation.A heat pump controller is integrated for fully automatic, weather-compensated control of the heating system. • Both the brine and heating sides are equipped with a high efficiency circulation pump. • An insulated pump assembly supplies the heat distribution system.WPE-I 04 HW 230 GB Premium Pack WPE-I 04 HW 230 GB Premium PackWPE-I 06 HW 230 GB Premium PackWPE-I 08 HW 230 GB Premium PackWPE-I 12 HW 230 GB Premium PackWPE-I 15 HW 230 GB Premium PackPart number 204400 204406 204401 204403 204408Price excl. VAT £ 12,257.00 12,360.00 12,848.00 14,287.00 15,052.00

next page >Product information 2024 - Subject to technical modifications.Ground source heat pumps – inverterInverter123Set components WPE-I 04 HW 230 GB Premium PackWPE-I 06 HW 230 GB Premium PackWPE-I 08 HW 230 GB Premium PackWPE-I 12 HW 230 GB Premium PackWPE-I 15 HW 230 GB Premium Pack1 Type SBP 100 Plus SBP 100 Plus SBP 100 Plus SBP 100 Plus SBP 100 Plus Qty 1 1 1 1 1 Buffer cylinder Buffer cylinder Buffer cylinder Buffer cylinder Buffer cylinder Page 168 168 168 168 1682 Type WPE-I 04 HW 230 GB PremiumWPE-I 06 HW 230 GB PremiumWPE-I 08 HW 230 GB PremiumWPE-I 12 HW 230 GB PremiumWPE-I 15 HW 230 GB Premium Qty 1 1 1 1 1 Ground source heat pumpGround source heat pumpGround source heat pumpGround source heat pumpGround source heat pump Page 110 110 110 110 1103 Type WPSF WPSF WPSF WPSF WPSF Qty 1 1 1 1 1 WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit Page 120 120 120 120 1204 Type FS-WP 22 FS-WP 22 FS-WP 22 FS-WP 22 FS-WP 22 Qty 1 1 1 1 1 Filter sets Filter sets Filter sets Filter sets Filter sets Page 121 121 121 121 1215 Type FET FET FET FET FET Qty 1 1 1 1 1 Digital remote control Digital remote control Digital remote control Digital remote control Digital remote control Page 131 131 131 131 1316 Type ISG web ISG web ISG web ISG web ISG web Qty 1 1 1 1 1 Internet Service GatewayInternet Service GatewayInternet Service GatewayInternet Service GatewayInternet Service Gateway Page 130 130 130 130 130 WPE-I 04-15 HK 230 Premium PackBenefits › Mono mode operation possible for heating and DHW thanks to higher flow temperatures › Inverter technology allows ideally matched heating output through the variable speed compressor › Easy and time saving installation, due to high level of integration and inclusion of accessories › Buffer cylinder to separate the flows for maximum operational reliability › Separate DHW cylinder for a high level of hot water convenience › Integral passive coolingApplication • This ground source heat pump with output-dependent control and inverter technology is installed in-doors and combined with a separate buffer and DHW cylinder. • The heat pump can be used in modernisation projects as high flow temperatures of up to 75 °C are available all year round for room heating and DHW heating. Passive cooling is integrated. • The integral heat pump manager enables fully automatic, weather-compensated control of the heating system. • High efficiency circulation pumps and expansion vessels are provided for both the brine side and the heating side. • An insulated pump assembly supplies the heat distribution system.WPE-I 04 HK 230 Premium Pack WPE-I 04 HK 230 Pre-mium PackWPE-I 06 HK 230 Pre-mium PackWPE-I 08 HK 230 Pre-mium PackWPE-I 12 HK 230 Pre-mium PackWPE-I 15 HK 230 Pre-mium PackPart number 204399 204405 204402 204407 204404Price excl. VAT £ 13,968.00 14,071.00 14,560.00 15,997.00 16,763.00 Set components WPE-I 04 HK 230 Pre-mium PackWPE-I 06 HK 230 Pre-mium PackWPE-I 08 HK 230 Pre-mium PackWPE-I 12 HK 230 Pre-mium PackWPE-I 15 HK 230 Pre-mium Pack1 Type SBP 100 Plus SBP 100 Plus SBP 100 Plus SBP 100 Plus SBP 100 Plus Qty 1 1 1 1 1 Buffer cylinder Buffer cylinder Buffer cylinder Buffer cylinder Buffer cylinder Page 168 168 168 168 1687

Product information 2024 - Subject to technical modifications.Ground source heat pumps – inverterInverter124Set components WPE-I 04 HK 230 Pre-mium PackWPE-I 06 HK 230 Pre-mium PackWPE-I 08 HK 230 Pre-mium PackWPE-I 12 HK 230 Pre-mium PackWPE-I 15 HK 230 Pre-mium Pack2 Type WPE-I 04 HK 230 Pre-miumWPE-I 06 HK 230 Pre-miumWPE-I 08 HK 230 Pre-miumWPE-I 12 HK 230 Pre-miumWPE-I 15 HK 230 Pre-mium Qty 1 1 1 1 1 Inverter ground source heat pumpInverter ground source heat pumpInverter ground source heat pumpInverter ground source heat pumpInverter ground source heat pump Page 115 115 115 115 1153 Type SBB 302 WP (GB) Set SBB 302 WP (GB) Set SBB 302 WP (GB) Set SBB 302 WP (GB) Set SBB 302 WP (GB) Set Qty 1 1 1 1 1 DHW cylinder DHW cylinder DHW cylinder DHW cylinder DHW cylinder Page 158 158 158 158 1584 Type WPSF WPSF WPSF WPSF WPSF Qty 1 1 1 1 1 WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit Page 120 120 120 120 1205 Type FS-WP 28 FS-WP 28 FS-WP 28 FS-WP 28 FS-WP 28 Qty 2 2 2 2 2 Filter sets Filter sets Filter sets Filter sets Filter sets Page 121 121 121 121 1216 Type UP 25-60-180 UP 25-60-180 UP 25-60-180 UP 25-60-180 UP 25-60-180 Qty 1 1 1 1 1 Circulation pump for external DHW heatingCirculation pump for external DHW heatingCirculation pump for external DHW heatingCirculation pump for external DHW heatingCirculation pump for external DHW heating Page 180 180 180 180 1807 Type FET FET FET FET FET Qty 1 1 1 1 1 Digital remote control Digital remote control Digital remote control Digital remote control Digital remote control Page 131 131 131 131 1318 Type ISG web ISG web ISG web ISG web ISG web Qty 1 1 1 1 1 Internet Service GatewayInternet Service GatewayInternet Service GatewayInternet Service GatewayInternet Service Gateway Page 130 130 130 130 1309 Type TAF PT 2m TAF PT 2m TAF PT 2m TAF PT 2m TAF PT 2m Qty 2 2 1 2 2 Immersion/contact sensorImmersion/contact sensorImmersion/contact sensorImmersion/contact sensorImmersion/contact sensor Page 124 124 124 124 124More details regarding set contents can be found under the relevant product

next page >Product information 2024 - Subject to technical modifications.Ground source heat pumps – inverterInverter125WPE-I 04-15 HK 230 PremiumBenefits › Inverter technology allows ideally matched heating output through the variable speed compressor › Passive cooling function with minimal operating costs via a geothermal probe system › Futureproof and eco-friendly refrigerant with high efficiency › High hot water convenience and mono mode heating thanks to high flow temperatures of up to 75°C › Easy and time saving installation with high level of integration › Very quiet operation thanks to the intelligent sound prevention concept including a number of anti-vibration mounts › Pressure monitoring in the heat source circuit with integral brine pressure switchApplication • This ground source heat pump with output-dependent control and inverter technology is installed in-doors. • The high level of integration facilitates installation. Does not take up much space thanks to the small footprint. • With the heat pump, energy efficient passive cooling via the underfloor heating system is possible thanks to the integral intermediate heat exchanger. • The heat pump can be used in modernisation projects as flow temperatures of up to 75 °C are available all year round for room heating and DHW heating. • Mono mode is possible for both heating and DHW heating.Convenience features • Quiet operation, due to encapsulated refrigerant circuit and acoustically isolated compressor. • Fully automatic, weather-compensated control of the heating system is assured by the integral heat pump manager. Control via the home network or from a mobile device is possible via the optional Internet Service Gateway. • With integral heat and electricity metering via refrigerant circuit data. • High level of integration: high efficiency circulation pumps and expansion vessels for the brine and heating side are included. Also integrated are the electric emergency/auxiliary heater for mono energetic operation and pasteurisation, the diverter valve for DHW heating and a safety valve with drain pipe. • The refrigerant circuit works with the eco-friendly and futureproof refrigerant R454C whose properties are optimised for use in heat pumps. • The corrosion-protected, enamelled metal casing is made from hot-dip galvanised, powder coated sheet steel.Efficiency • Optimum operation and high efficiency all year round are provided by the inverter and integral recuperator.Installation • Carrying handles are provided on the back panel for easy transport. No special safety precautions are required when siting. A minimum room size must be ensured. Internal pressure hoses enable direct hydraulic connection to the heating and brine circuits. For easy installation, the hydraulic connections are equipped with quick-release fittings and are thermally insulated.WPE-I 04 HK 230 Premium WPE-I 04 HK 230 PremiumWPE-I 06 HK 230 PremiumWPE-I 08 HK 230 PremiumWPE-I 12 HK 230 PremiumWPE-I 15 HK 230 PremiumPart number 202615 238614 238615 238616 238617Price excl. VAT £ 8,511.00 8,614.00 9,103.00 10,540.00 12,556.00 Specification Energy efficiency class, heat pump W35 A+++ A+++ A+++ A+++ A+++Energy efficiency class, heat pump W55 A+++ A+++ A+++ A+++ A+++Energy efficiency class, com-posite system (heat pump + controller) W35 A+++ A+++ A+++ A+++ A+++Energy efficiency class, com-posite system (heat pump + controller) W55 A+++ A+++ A+++ A+++ A+++Heating output at B0/W35 (EN 14511)kW 1,96 2,37 2,78 4,19 5,18Heating output at B0/W35 (min./max.)kW 1,0-4,2 1,0-6,6 1,0 - 7,6 2,1-12,7 2,1-14,8COP at B0/W35 (EN 14511) 4.60 4.60 4.67 5.01 4.86Cooling capacity at B15/W23 kW 2.5 3 4 6 8SCOP 35 °C (EN 14825) 5.07 5.20 5.12 5.59 5.44Sound power level (EN 12102) dB(A) 38-40 38-43 38-45 39-46 39-47Max. application limit on the heating side°C 75 75 75 75 75Height mm 1369 1369 1369 1369 13697

Product information 2024 - Subject to technical modifications.Ground source heat pumps – inverterInverter126 WPE-I 04 HK 230 PremiumWPE-I 06 HK 230 PremiumWPE-I 08 HK 230 PremiumWPE-I 12 HK 230 PremiumWPE-I 15 HK 230 PremiumWidth mm 598 598 598 598 598Depth mm 658 658 658 658 658Weight kg 180 180 180 190 190Rated voltage, compressor V 230 230 230 230 230Rated voltage, emergency/aux-iliary heaterV 230 230 230 230 230Refrigerant R454C R454C R454C R454C R454CConnection, heating side 28 mm 28 mm 28 mm 28 mm 28 mmConnection, heat source side 28 mm plug-in con-nection28 mm plug-in con-nection28 mm plug-in con-nection28 mm plug-in con-nection28 mm plug-in con-nection Recommended accessories Part number 229336 229336 229336 229336 229336Type ISG web ISG web ISG web ISG web ISG webDescription Internet Service GatewayInternet Service GatewayInternet Service GatewayInternet Service GatewayInternet Service GatewayPrice excl. VAT £ 871.00 871.00 871.00 871.00 871.00Part number 233307 233307 233307 233307 233307Type WPSF WPSF WPSF WPSF WPSFDescription WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit Price excl. VAT £ 306.00 306.00 306.00 306.00 306.00 Notice: Heat source temperatures of up to 40 °C are permissible briefly (max. 30 min).WPE-I 06 HK 230 Premium WPE-I 08 HK 230 Premium WPE-I 12 HK 230 Premium WPE-I 15 HK 230 Premium ≥500≥50≥500≥500≥1000Minimum clearance diagramD0000034469.ai

next page >Product information 2024 - Subject to technical modifications.Ground source heat pumps – inverterInverter127WPE-I 33-87 H 400 PremiumBenefits › Particularly efficient DHW heating using hot gas technology › Inverter technology allows ideally matched heating output through the variable speed compressor › Highly versatile, as both cascade control and dual mode integration are possible › Intuitive operation via colour touchscreen › Easy to integrate thanks to various BMS interfacesApplication • This ground source heat pump with output-dependent control and inverter technology is installed indoors. • The heat pump is suitable for apartment buildings and commercial premises. • With the help of additional hydraulic components, the existing source system can be used for passive and active cooling, or for simultaneous heating and cooling. • It can be used in mono mode for heating and DHW operation. • Up to 16 heat pumps can be operated in a cascade to achieve the required heating output.Convenience features • The heat pump can be installed in different types of buildings. The integral inverter contin-uously adjusts the heating output to match the current energy demand, which ensures flexibility in the application range. • One high efficiency circulation pump is provided for the brine side and one for the heating side. • The hot gas technology enables simultaneous DHW heating via an additional heat exchanger. • Fully automatic, weather-com-pensated control of the heating system is taken care of by the integral heat pump manager with colour touchscreen. When combined with the optional ISG Internet Service Gateway, it is also possible to control the system in the home network or with a mobile device. There is also optional provision for external control of the heating system via a building management system. • To minimise the transfer of structure-borne sound to the building, the refrigerant circuit is mounted on an anti-vibration base plate and its internal hydraulic connections are flexible. • The refrigerant circuit is hermetically sealed, tested for leaks at the factory and filled with safety refrigerant R410A.Efficiency • The heat pump’s all year round demand-dependent output provision is ensured by the integral inverter which also enables the system to operate very efficiently. • The hot gas technology included as standard ensures high DHW temperatures with very good efficiency and at low cost.Installation • The vertical design means that only a small installation space is required. • The high level of integration enables quick and simplified installation, even with larger systems. The appliances are fully installed and delivered ready for operation. • Internal pressure hoses are provided for direct hydraulic connection to the heating and brine circuits.WPE-I 33 H 400 Premium WPE-I 33 H 400 Premium WPE-I 44 H 400 Premium WPE-I 59 H 400 Premium WPE-I 87 H 400 PremiumPart number 201412 201413 201414 201415Price excl. VAT £ 22,121.00 24,577.00 28,265.00 33,180.00 Specification Energy efficiency class, heat pump W35 A+++ A+++ A+++ A+++Energy efficiency class, heat pump W55 A+++ A+++ A+++ A+++Energy efficiency class, com-posite system (heat pump + controller) W35 A+++ A+++ A+++ A+++Energy efficiency class, com-posite system (heat pump + controller) W55 A+++ A+++ A+++ A+++Heating output at B0/W35 (EN 14511)kW 20,18 26,71 35,60 52,00Heating output at B0/W35 (min./max.)kW 10-33 11-44 14-59 21-87COP at B0/W35 (EN 14511) 4.73 4.60 4.50 4.71SCOP 35 °C (EN 14825) 5.55 5.65 5.19 5.17Sound power level (EN 12102) dB(A) 41-56 41-56 46-61 46-63Max. application limit on the heating side°C 65 65 65 65Height mm 1723 1723 1742 1742Width mm 692 692 900 9007

Product information 2024 - Subject to technical modifications.Ground source heat pumps – inverterInverter128 WPE-I 33 H 400 Premium WPE-I 44 H 400 Premium WPE-I 59 H 400 Premium WPE-I 87 H 400 PremiumDepth mm 803 803 848 848Weight kg 300 300 430 550Rated voltage, compressor V 400 400 400 400Refrigerant R410A R410A R410A R410AConnection, heating side 35 mm 35 mm 42 mm 42 mmConnection, hot gas mm 28 28 28 28Connection, heat source side 42 mm 42 mm 54 mm 54 mm Recommended accessories Part number 201715 201715 201715 201715Type EM 33-87 EM 33-87 EM 33-87 EM 33-87Description Extension module for WPMGExtension module for WPMGExtension module for WPMGExtension module for WPMGPrice excl. VAT £ 461.00 461.00 461.00 461.00Part number 201716 201716 201716 201716Type HG Set 33-87 HG Set 33-87 HG Set 33-87 HG Set 33-87Description Hot gas set Hot gas set Hot gas set Hot gas setPrice excl. VAT £ 547.00 547.00 547.00 547.00Part number 201767 201767 201767 201767Type FEG FEG FEG FEGDescription Digital remote control Digital remote control Digital remote control Digital remote controlPrice excl. VAT £ 222.00 222.00 222.00 222.00Part number 202062 202062 202062 202062Type EMW EMW EMW EMWDescription Extension module with wall mounted enclosureExtension module with wall mounted enclosureExtension module with wall mounted enclosureExtension module with wall mounted enclosurePrice excl. VAT £ 563.00 563.00 563.00 563.00Part number 202099 202099 202099 202099Type FEW FEW FEW FEWDescription Room temperature sensor for WPMGRoom temperature sensor for WPMGRoom temperature sensor for WPMGRoom temperature sensor for WPMGPrice excl. VAT £ 345.00 345.00 345.00 345.00Part number 202779 202779 202779 202779Type FSHP-L45 FSHP-L45 FSHP-L45 FSHP-L45Description Flow switch Flow switch Flow switch Flow switchPrice excl. VAT £ 658.00 658.00 658.00 658.00Part number 229336 229336 229336 229336Type ISG web ISG web ISG web ISG webDescription Internet Service Gateway Internet Service Gateway Internet Service Gateway Internet Service GatewayPrice excl. VAT £ 871.00 871.00 871.00 871.00Part number 233307 233307 233307 233307Type WPSF WPSF WPSF WPSFDescription WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit WPSF multifunction brine filling unit Price excl. VAT £ 306.00 306.00 306.00 306.00 Buffer cylinder Part number 203765 203765 Type STH 720 Plus STH 720 Plus Description Buffer cylinder Buffer cylinder Price excl. VAT £ 1,785.00 1,785.00 Part number 227564 Type SBP 1000 E Description Buffer cylinder Price excl. VAT £ 1,933.00 Part number 227565Type SBP 1500 EDescription Buffer cylinderPrice excl. VAT £ 2,032.00

Ground source and water source heat pumpsAccessories for ground source heat pumpsProduct information 2024 - Subject to technical modifications.Ground source and water source heat pumpsAccessories for ground source heat pumps129Accessories Accessories1307

next page >Accessories for ground source heat pumpsAccessoriesProduct information 2024 - Subject to technical modifications.Accessories for ground source heat pumpsAccessories130UPFBenefits › Reliable and energy efficient brine circulation pump › Electronic closed-loop control › Insulation shell included in delivery › with connecting cable and non-return valve (Product: 232532)Description • Circulation pump with vapour diffusion-proof thermal insulation. Energy efficient thanks to integral electronic output control for constant or variable differential pressure. The circulation pump is suitable for operation on the heat source side of ground source heat pumps.UPF 30/1-8 E UPF 30/1-8 E UPF 40/1-8 E UPF 50/1-12 EPart number 232532 227413 227414Price excl. VAT £ 640.00 1,593.00 1,991.00 Specification Energy Efficiency Index EEI 0.23 0.23 0.23Connection G 2 DN 40 DN 50Delivery head m 8.00 8.00 12.00Max. flow rate m³/h 8.00 15.00 29.00Power consumption W 8-130 12-310 25-590Rated voltage V 230 230 230Control via 0-10 V signal with IF module - - -Control via differential pressure x x xControl via PWM signal - - -Installation length (centre distance)mm 180 220 280 WPSFBenefits › Multifunction brine filling unit › Both microbubble separator and filter already integrated › Easily removable filter element › Preassembled components for source side › Microbubble separator and filter already integrated (Product: 233307) › Filter element easy to remove (Product: 233307) › All important components for the source side are pre-assembled (Product: 233307)Application • This multifunction filling unit can be used for ground source heat pumps with a heating output of up to 16 kW. It is used to fill or flush the brine circuit and facilitates easy and quick installation on the heat source side. • The standard delivery includes the brine safety valve, pressure gauge, filter, quick-action air vent valve, microbubble separator and vapour diffusion-proof insulation.WPSF WPSFPart number 233307Price excl. VAT £ 306.00

Product information 2024 - Subject to technical modifications.Accessories for ground source heat pumpsAccessories131 WPSFSpecification Connection, heat source side G 1 1/4 ASafety valve response pressure MPa 0.30Max. application limit, heat source°C 40Min. application limit, heat source°C -5Max. operating pressure MPa 0.60 AGBenefits › Colour: white › For wall mounting (Product: 235218, 235219, 235220) › Volume: 12 l (Product: 235218) › Volume: 18 l (Product: 235219) › Volume: 25 l (Product: 235220) › For floorstanding installation (Product: 235221) › Volume: 50 l (Product: 235221)Description • The brine-resistant diaphragm expansion vessel for ground source heat pumps has a rolling diaphragm for pressure maintenance and volume compensation for the heat source side.MAG 12 MAG 12 MAG 18 MAG 25 MAG 50Part number 235218 235219 235220 235221Price excl. VAT £ 67.00 75.00 89.00 134.00 Specification Expansion vessel l 12 18 25 50Pre-charge pressure bar 0.50 0.50 0.50 0.50 FS-WPBenefits › Easily removable filter element › Brass body › Can be installed vertically or horizontally › With backflushing facility (Product: 233511) › With a removable filter (Product: 233512)Description • The filter to protect the ground source heat pump against impurities is installed in the return of the heat generator.FS-WP 22 FS-WP 22 FS-WP 28Part number 233511 233512Price excl. VAT £ 76.00 131.00 Specification Connection G 1 A / Cu 22 x 1 G 1 1/4 A / Cu 28 x 1.5 7

Product information 2024 - Subject to technical modifications.Accessories for ground source heat pumpsAccessories132EM 33-87Benefits › Extension module for extended WPMG controller functions › Suitable for installation in the heat pumpDescription • The extension module is used for actuating other functions and integrating additional heating circuits or heat generators, for example.EM 33-87 EM 33-87Part number 201715Price excl. VAT £ 461.00 EMWBenefits › Extension module for extended WPMG controller functions › A wall mounted enclosure for installation direct onto the wall is included in the standard deliveryDescription • The extension module is used to control extra functions, such as additional heating circuits or heat generators. The module is supplied with a wall mounted enclosure. EMW EMWPart number 202062Price excl. VAT £ 563.00 Specification Width mm 300Height mm 180Depth mm 109

Product information 2024 - Subject to technical modifications.Accessories for ground source heat pumpsAccessories133HG Set 33-87Benefits › Hot gas setDescription • The set for DHW heating via hot gas consists of a circulation pump and a line regulating valve.HG Set 33-87 HG Set 33-87Part number 201716Price excl. VAT £ 547.00 Specification Power consumption W 6Rated voltage V 230 FEGBenefits › Remote control for adjusting room temperature or heating circuit temperatureDescription • The remote control is combined with the WPMG controller. • The integral sensor measures the room temperature in the lead room; the room temperature or set temperature can be adjusted.FEG FEGPart number 201767Price excl. VAT £ 222.00 7

Product information 2024 - Subject to technical modifications.Accessories for ground source heat pumpsAccessories134FEWBenefits › The FEW room temperature sensor measures the current temperature and humidityDescription • The FEW room temperature sensor measures the temperature and air humidity in closed rooms.FEW FEWPart number 202099Price excl. VAT £ 345.00 TAF PTDescription • The PT 1000 sensor is used in heat pump systems as an immersion or contact sensor.TAF PT 2m TAF PT 2mPart number 235996Price excl. VAT £ 30.00 Specification Version Temperature sensorWith supply line •Colour whiteDiameter mm 6 (Product: 235996)

Heat pumps Accessories for heat pumps and cylindersProduct information 2024 - Subject to technical modifications.Heat pumpsAccessories for heat pumps and cylinders135Control units 138Hydraulic modules 152Accessories for hydraulic modules 154Integral cylinder 156Accessories for integral cylinders 164DHW cylinder 168Accessories for DHW cylinders 172Instantaneous water cylinders 174Accessories for instantaneous water cylinders 176Buffer cylinder178Accessories for buffer cylinders 182Additional accessories 186Heat pump accessories 1908

Product information 2024 - Subject to technical modifications.136

Accessories for heat pumps and cylindersControl unitsProduct information 2024 - Subject to technical modifications.Accessories for heat pumps and cylindersControl units137Controller Accessories138Connectivity Accessories140Controller accessories Accessories141Individual room control Accessories1438

next page >Control units ControllerProduct information 2024 - Subject to technical modifications.Control unitsController138WPMBenefits › Heat pump manager in stylish wall mounted enclosure › Management of a 2-stage on/off or inverter cascade for one direct heating circuit and two heating circuits with mixer › Straightforward electrical installation thanks to RAST 5 connector technology › Integral heat metering › Cooling control function › A second heat generator can be controlled › Screed drying program › DHW circulation pump management › PWM circulation pump management › 3 immersion/contact sensors and 1 outside sensor are included in the standard delivery › Fault output 230 V › Update via an SD card › An internet interface is available as an option › SG Ready (optional) › Smart home and energy management interfaces (optional)Application • This WPM heat pump manager is the main controller in the system. One direct heating circuit and two heating circuits with mixer can be controlled via the integral programming unit. Two heat pumps can also be operated in a cascade. • In combination with the ISG Internet Service Gateway, the heat pump can be integrated into a home network or controlled from mobile devices. • Direct connection of high efficiency circulation pumps is possible via relay outputs or PWM outputs. • The WPM also provides a fault contact for external pick-up of system faults. • A drip-proof wall mounted enclosure with large installation area provides sufficient space for the electrical connections and other components such as a top-hat rail relay. The well designed cable layout ensures easy connection.WPMSpecification Protection class ISupply voltage V 230IP rating IP 21Width mm 310Height mm 400Depth mm 100 Controller, 1 AF PT outside sensor, 3 TAFPT sensors (Product: 234727) WPEBenefits › Function extension module for the WPM heat pump manager › Data link via the system bus › Straightforward electrical installation thanks to RAST 5 connector technology › The sensor is adjusted and operated via the programming unit on the WPM heat pump manager › Management of 4 additional heat pump stages › Two additional heating circuits with mixer can also be controlled › Swimming pool management › Universal differential controller › 3 immersion/contact sensors are included in the standard deliveryApplication • This WPE heat pump extension adds numerous functions to the WPM heat pump manager. It offers two additional heating circuits with mixer, a swimming pool controller and cascade control for up to six heat pumps. Two additional 0-10 V interfaces, a differential controller and switching outputs are also available. • The enclosure is installed to the right or left of the WPM and is connected to the power supply via the bus. • The module‘s additional functions can be set at the programming unit of the WPM.WPE WPEPart number 234725Price excl. VAT £ 857.00

Product information 2024 - Subject to technical modifications.Control unitsController139 WPESpecification Protection class ISupply voltage V 230IP rating IP 21Width mm 310Height mm 400Depth mm 100 Required accessories Part number 234727Type WPMDescription Heat pump manager in wall mounted enclosurePrice excl. VAT £ 575.00 Controller, 3 TAF PT sensors (Product: 234725) 8

Control units ConnectivityProduct information 2024 - Subject to technical modifications.Control unitsConnectivity140ISG webBenefits › Browser-based operation of the heat pump in a home network › Can be integrated into home automation systems through Modbus TCP/IP software interface fitted as standard › Forecast-based on-site PV self-consumption facilitated by optional EMI software extension › Optional automation with KNX IP software extensionApplication • The ISG Internet Service Gateway connects the heat pump to the home network and enables the appliance to be operated using a browser. • Once enabled, appliance data is transferred to the Stiebel Eltron Internet Service Portal. • The ISG plus is a required accessory for use of the SG Ready functions of the WPM heat pump manager. The ISG can be integrated into an existing building management system via the Modbus TCP/IP data interface.ISG web ISG webPart number 229336Price excl. VAT £ 871.00 Specification Version Wall mounting10/100 Ethernet RJ45CAN RJ45RS232 RJ12Width mm 158Height mm 95Depth mm 37Min./max. application range °C 0 / 60 Observe the compatibility list.

Control units Controller accessoriesProduct information 2024 - Subject to technical modifications.Control unitsController accessories141FE7Benefits › The integral sensor measures the room temperature › Choice of operating mode › Remote control for the WPM heat pump managerDescription • The analogue remote control is equipped with an integral temperature sensor that measures the room temperature. • The remote control is used to adjust the set room temperature and adapt operating modes.FE 7 FE 7Part number 185579Price excl. VAT £ 79.00 Specification Width mm 80Height mm 80Depth mm 30 FETBenefits › Data link via the system bus › Room remote control with thermostatic function for the WPM heat pump manager › Can be used for each of the 5 heating circuits in the WPM system › Illuminated graphic display › Display of time, room temperature and room humidity, along with outside temperature › Touch-Wheel operation › Room temperature and humidity measurement › Simple adjustment of comfort temperature › Energy savings with selectable eco function › Activating a DHW charging processDescription • The FET digital remote control can be used to conveniently control a heating zone. • The remote control measures the relative humidity and room temperature.FET FETPart number 234723Price excl. VAT £ 248.00 Specification Width mm 145Height mm 96Depth mm 31 8

Product information 2024 - Subject to technical modifications.Control unitsController accessories142TAF PTDescription • The PT 1000 sensor is used in heat pump systems as an immersion or contact sensor.TAF PT 2m TAF PT 2mPart number 235996Price excl. VAT £ 30.00 Specification Version Temperature sensorWith supply line •Colour whiteDiameter mm 6 (Product: 235996)

Control units Individual room controlProduct information 2024 - Subject to technical modifications.Control unitsIndividual room control143EZEBenefits › Central base station for the EASYTRON Connect individual room control system › Preferred temperature adjustable in each room › Economy functions such as holiday and time programs › Wireless connection between all components of the individual room control system and the central base station via the Z-Wave communication protocol › Can be operated from anywhere at any time via the free app › In some cases, may eliminate the need to include a buffer cylinder in the system designApplication • This base station is the central connection point for EASYTRON Connect individual room control. An EASYTRON Connect individual room control system measures the room temperature and adjusts the temperature in each living space to the preferred temperature.Convenience features • Additional EASYTRON components suited to the application can be connected to the base station. Smart thermostats are available for connection to radiators, wireless sensors for measuring room tem-perature and heating controllers for controlling actuators in underfloor heating systems. • Individual components communicate with each other by Z-wave radio. To improve wireless coverage, repeaters can be interposed. An app (iOS® and Android®) is used to operate the system. • Until now, the individual room control systems on the market have offered little opportunity to directly influence the heat generator, e.g. a heat pump. The EASYTRON individual room control system responds optimally to different operating conditions, such as defrosting. An EASYTRON Connect individual room control system is therefore the ideal supplement to the heat pump control unit. • It can be used both for water-based underfloor heating and radiators, and significantly increases comfort and convenience.EZE EZEPart number 237737Price excl. VAT £ 220.00 Specification Installation type Floor mounted applianceUSB 210/100 Ethernet RJ45WLAN 802.11 b/g/nZ-Wave radio MHz 868.42Power supply, power supply unit 1/N ~ 230 V 50 HzSupply voltage V 5Power consumption W 5Operating temperature range °C 0...+50Colour whiteWidth mm 124Height mm 124Depth mm 28Weight kg 0.17Storage and transportation temperature°C -20...+60 The end customer connection (or that of the Internet Service Provider) must support all standard network technologies (in particular a public IP v4 address). Observe the compatibility list.8

Product information 2024 - Subject to technical modifications.Control unitsIndividual room control144ESSBenefits › EASYTRON Connect starter pack for systems with underfloor heating: contains components for up to 3 roomsDescription • The compact starter set of the EASYTRON individual room control contains the necessary components for individual room control in heating systems with underfloor heating in three rooms. • The standard delivery includes the base station, the heating controller and three room temperature sensors.ESS ESSPart number 237739Price excl. VAT £ 648.00 The end customer connection (or that of the Internet Service Provider) must support all standard network technologies (in particular a public IP v4 address). Observe the compatibility list.EHFBenefits › Wireless controller for underfloor heating › Connection for thermoelectric actuators, 230 V NC (up to 8 channels) › External aerial for optimum wireless connectionDescription • The heating controller can be used to connect the heating circuits of an underfloor heating system to the EASYTRON individual room control. • A maximum of 8 channels with up to 3 thermoelectric actuators each can be controlled. This means that up to 24 thermoelectric actuators (not included in the standard delivery) can be connected. • The controller can be fitted either to a top-hat rail available on site or to the top-hat rail provided.EHF EHFPart number 237736Price excl. VAT £ 278.00 Specification Installation type DIN railZ-Wave radio MHz 868.42Max. relay output breaking capacityA 1 AProtection class II (bei Montage in einem Unterverteiler)IP rating IP 00Width mm 160Height mm 91Depth mm 58 Required accessories Part number 237737Type EZEDescription EASYTRON Connect base stationPrice excl. VAT £ 220.00

Product information 2024 - Subject to technical modifications.Control unitsIndividual room control145EFSApplication • This thermoelectric actuator opens and closes valves on heating circuit distributors of area heating systems. • Actuated via a room temperature controller. The integral function display signals adjustments. • The ready-to-use actuator is designed to be plugged into the heating circuit distributor.EFS EFSPart number 237740Price excl. VAT £ 27.00 Standard delivery includes the VA10 and VA80 valve adaptors. ERTBenefits › Battery powered room temperature sensor › Connected to EASYTRON Connect base station via Z-Wave wireless protocol › Power from two standard AAA batteriesDescription • The room temperature sensor of the EASYTRON individual room control system measures the tem-perature in a living space. • The battery-operated sensor is connected wirelessly to the base station. It is suitable for wall mounting.ERT ERTPart number 237738Price excl. VAT £ 63.00 Specification Installation type Surface-mountedOperating temperature range °C -10...+50Z-Wave radio MHz 868.42Power supply Batteries 2*1.5 V AAAColour whiteWidth mm 79Height mm 79Depth mm 18Weight kg 0.075Storage and transportation temperature°C -20...+60 Required accessories Part number 237737Type EZEDescription EASYTRON Connect base stationPrice excl. VAT £ 220.00 8

Product information 2024 - Subject to technical modifications.Control unitsIndividual room control146ERSBenefits › Battery powered smart thermostat for controlling radiators › Integral sensor for measuring the room temperature › Integral window-open detection › Quiet motor › Connected to EASYTRON Connect base station via Z-Wave wireless protocol › Compatible with M30 x 1.5 and Danfoss RA valvesDescription • The smart thermostat of the EASYTRON individual room control system is used to control radiators. The room temperature is measured by the integral sensor and the low-noise motor regulates the room temperature. • The thermostat can be connected to the EASYTRON base station using the Z-wave wireless protocol. It is compatible with standard M30 x 1.5 and Danfoss RA radiator valves.ERS ERSPart number 237741Price excl. VAT £ 111.00 Specification Z-Wave radio MHz 868.42Control signal LinearSpindle movement 2-3 mm at valve (1 mm/s)Maximum displacement mm 4.50Max. heating flow temperature °C 90Mechanical load breaking capacityN 70Power supply Batteries 2*1.5 V AAColour whiteDiameter mm 51Length m 0,091Weight kg 0.195Operating temperature range °C 0...+40Storage and transportation temperature°C -20...+60 Required accessories Part number 237737Type EZEDescription EASYTRON Connect base stationPrice excl. VAT £ 220.00

Product information 2024 - Subject to technical modifications.Control unitsIndividual room control147EREBenefits › Repeater to boost the Z-Wave wireless signal › Plug & play › For straightforward electrical connection to any standard safety socketDescription • The repeater is an accessory for the EASYTRON individual room control. • To improve wireless cover-age, the Z-wave wireless signal is forwarded. • The repeater is simply plugged into a 230 V standard safety socket.ERE EREPart number 237743Price excl. VAT £ 106.00 Specification Installation type Plug-in deviceZ-Wave radio MHz 868.42Power supply 1/N ~ 230 V 50 HzPower consumption W 1,2Operating temperature range °C 0...+40Colour whiteWidth mm 46Height mm 46Depth mm 61Weight kg 0.038Storage and transportation temperature°C -20...+60 Required accessories Part number 237737Type EZEDescription EASYTRON Connect base stationPrice excl. VAT £ 220.00 8

next page >Product information 2024 - Subject to technical modifications.Control unitsIndividual room control148EILBenefits › Tool for hardwired commissioning of the EASYTRON system › Adaptor for LAN to USB › Allows access to the EASYTRON Connect base station without requiring access to the customer networkDescription • This tool is used for hardwired commissioning of the individual room control system. • It functions as an adaptor from RJ45 to USB and enables separate access to the base station without needing to access the customer network.EIL EILPart number 237744Price excl. VAT £ 53.00 Specification USB 210/100 Ethernet RJ45Operating temperature range °C 0...+50Colour whiteWidth mm 22Height mm 65Depth mm 16Weight kg 0.02Storage and transportation temperature°C -20...+60 EIWBenefits › Tool for wireless commissioning of the EASYTRON system › WLAN USB stick › Allows access to the EASYTRON Connect base station without requiring access to the customer networkDescription • This WLAN commissioning stick is used for wireless commissioning of the EASYTRON individual room control system via WLAN. The stick is connected to the USB interface of the base station. It enables separate access to the base station via a WLAN hotspot. This enables the system to be configured without having to access the network or router.EIW EIWPart number 237745Price excl. VAT £ 73.00 Specification USB 2WLAN 802.11 b/g/nOperating temperature range °C 0...+50Colour whiteWidth mm 20Height mm 6

Product information 2024 - Subject to technical modifications.Control unitsIndividual room control149 EIWDepth mm 60Weight kg 0.02Storage and transportation temperature°C -20...+60 EADBenefits › Adaptor set for radiators › Suitable for RAVL and RAVDescription • EASYTRON Connect adaptor set for radiators with RAV or RAVL heating valves.EAD EADPart number 237742Price excl. VAT £ 21.00 Specification Adaptor for valve RAV and RAVLColour white Required accessories Part number 237741Type ERSDescription EASYTRON Connect radiator actuatorPrice excl. VAT £ 111.00 8

Product information 2024 - Subject to technical modifications.150

Accessories for heat pumps and cylindersHydraulic modulesProduct information 2024 - Subject to technical modifications.Accessories for heat pumps and cylindersHydraulic modules151Mono mode Accessories1528

Hydraulic modules Mono modeProduct information 2024 - Subject to technical modifications.Hydraulic modulesMono mode152HM TrendBenefits › Time saving installation of heating components thanks to high level of integration › Simple connection to the heat pump via water pipes › Very good thermal insulation for heating and cooling, with main body in expanded polypropylene (EPP)Application • This hydraulic module is suitable for simple hydraulic connection of mono block heat pumps to the heating system. The appliance is designed for heating or cooling in family houses. • The insulated, black EPP casing is mounted on the wall in the installation room to save space.Convenience features • The fully automatic, weather-compensated control of the heating system is provided by the integral heat pump manager. In combination with the optional Internet Service Gateway, the system can be controlled in the home network or with a mobile device. • With integral heat and electricity metering via refrigerant circuit data. • High level of integration: a high efficiency circulation pump and an expansion vessel are already included for the heating circuit. Also integrated are the electric emergency/auxiliary heater for mono energetic operation and pasteurisation, the heating diverter valve for DHW heating and a safety valve with drain pipe.HMS Trend HMS TrendPart number 233826Price excl. VAT £ 2,722.00 Specification Max. permissible pressure MPa 0.30External available pressure differential at 1.0 m³/hhPa 715External available pressure differential at 1.5 m³/hhPa 661External available pressure differential at 2 m³/hhPa 468External available pressure differential at 2.5 m³/hhPa 300Expansion vessel volume l 24Rated voltage, control unit V 230Rated voltage, emergency/aux-iliary heaterV 230Power consumption, emergen-cy/auxiliary heaterkW 5.90Height mm 896Height incl. connector block mm 1131Width mm 590Depth mm 405Weight kg 27Connection G 1 Recommended accessories Part number 233750Type AS-HM TrendDescription Hydraulic module connection setPrice excl. VAT £ 165.00

Accessories for heat pumps and cylindersAccessories for hydraulic modulesProduct information 2024 - Subject to technical modifications.Accessories for heat pumps and cylindersAccessories for hydraulic modules153Accessories Accessories1548

Accessories for hydraulic modules AccessoriesProduct information 2024 - Subject to technical modifications.Accessories for hydraulic modulesAccessories154AS-HM TrendBenefits › For connecting the hydraulic module in the Trend series › Three ball valves with drainDescription • The accessory, featuring ball valves in the flows, simplifies connection of the hydraulic module to the on-site pipework.AS-HM Trend AS-HM TrendPart number 233750Price excl. VAT £ 165.00 Specification Connection G 1 - 28 mm

Accessories for heat pumps and cylindersIntegral cylinderProduct information 2024 - Subject to technical modifications.Accessories for heat pumps and cylindersIntegral cylinder155With integral buffer cylinder Accessories156Without integral buffer cylinder Accessories1618

Integral cylinder With integral buffer cylinderProduct information 2024 - Subject to technical modifications.Integral cylinderWith integral buffer cylinder156HSBC 300 cool (GB) SetBenefits › Space saving positioning thanks to integration of DHW cylinder, buffer cylinder and hydraulic working parts into a single appliance › Large area heat exchanger for high DHW demand › The integral cylinder for DHW heating is combined with a heating heat pump and integrated into the heating system. › Can be used for cooling via area heating system or fan coil units (condensation resistance) › Installation requires little effort thanks to high level of integration including WPM heat pump managerApplication • This integral cylinder is suitable for DHW heating in heat pump mode. It can be simultaneously integrated into heating systems for the hydraulic connection and is used for delivery to/separation between the heat pump and heating circuit. • Designed for heating and cooling in family houses.Convenience features • DHW cylinder comprising an enamelled steel cylinder with directly applied foam insulation, an internal indirect coil and a magnesium signal anode for additional corrosion protection. The buffer cylinder is a steel cylinder with directly applied foam insulation. • The heat pump manager, cylinder charging pump, heating circuit pump and 3/2-way diverter valve are included. Prepared for optional extension with a heating circuit with mixer.Installation • The cylinders are arranged one above the other, can be separated from each other for easier installation and are equipped with recessed grips.Efficiency • Low standby losses because both the cylinder volume and the indirect coil surface area are matched to the application.HSBC 300 cool (GB) Set HSBC 300 cool (GB) SetPart number 204651Price excl. VAT £ 5,630.00 Specification Energy efficiency class BNominal capacity, DHW cyl-inderl 270Nominal capacity, buffer cyl-inderl 100Surface area, heat exchanger m² 3.20Capacity, heat exchanger l 21Standby energy consump-tion/24 h at 65 °CkWh 1.50Height mm 1918Width mm 680Depth mm 910Height when tilted mm 2123Weight kg 250 Recommended accessories Part number 238825Type HSBC 3-HKMDescription Mixer circuit pump assemblyPrice excl. VAT £ 593.00

Product information 2024 - Subject to technical modifications.Integral cylinderWith integral buffer cylinder157HSBC 200 S (GB) SetBenefits › The integral cylinder for DHW heating is combined with a heating heat pump and integrated into the heating system. › Space saving positioning thanks to integration of DHW cylinder, buffer cylinder and hydraulic working parts into a single appliance › Installation requires little effort thanks to high level of integration including WPM heat pump manager › Large area heat exchanger for high DHW demand › Additional application due to suitability for cooling, e.g. via an area heating systemApplication • This integral cylinder is suitable for DHW heating in heat pump mode. It can be simultaneously integrated into heating systems for the hydraulic connection and is used for delivery to/separation between the heat pump and heating circuit. • Designed for heating and cooling in family houses.Convenience features • The DHW cylinder comprises an enamelled steel cylinder with directly applied foam insulation, an internal indirect coil and a magnesium signal anode for additional corrosion protection. • The buffer cylinder consists of a steel cylinder with directly applied foam insulation. • The integral cylinder is equipped with the following components: heat pump manager, cylinder charging pump, circulation pump, 3/2-way diverter valve, safety valve with drain routed out of the rear of the appliance, T&P valve and electric emergency/auxiliary heater. • The appliance is prepared for optional extension with a heating circuit with mixer. • The cylinder casing consists of a plastic jacket, permanently attached at the back and sides. The front is made of sheet metal with a design cover.Installation • The two cylinders are arranged one above the other, can be separated from each other for easier installation and are equipped with recessed grips.Efficiency • Low standby losses because both the cylinder volume and the indirect coil surface area are matched to the application.HSBC 200 S (GB) Set HSBC 200 S (GB) SetPart number 236917Price excl. VAT £ 3,650.00 Specification Energy efficiency class BNominal capacity, DHW cyl-inderl 168Nominal capacity, buffer cyl-inderl 100Surface area, heat exchanger m² 3.30Capacity, heat exchanger l 21Standby energy consump-tion/24 h at 65 °CkWh 1.30Height mm 1908Width mm 680Depth mm 871Height when tilted mm 2107Weight kg 203 Recommended accessories Part number 234648Type HSBC-HKMDescription Mixer circuit pump assemblyPrice excl. VAT £ 600.00 8

Product information 2024 - Subject to technical modifications.Integral cylinderWith integral buffer cylinder158HSBC 180 S Plus (GB) SetBenefits › The integral cylinder for DHW heating is combined with a heating heat pump and integrated into the heating system. › Space saving positioning thanks to integration of DHW cylinder, buffer cylinder and hydraulic working parts into a single appliance › Installation requires little effort thanks to high level of integration including WPM heat pump manager › Can be used for cooling via area heating system or fan coil units (condensation resistance)Application • This integral cylinder is used for DHW heating in combination with a heat pump. The appliance simplifies the hydraulic connection in heating systems, as the heat pump and heating circuit flows are separated by means of an integral buffer cylinder. • Designed for use in family houses for heating and cooling.Convenience features • Standard delivery includes: WPM heat pump manager, cylinder charging pump, circulation pump, 3/2-way diverter valve, safety valve with drain routed out of the appliance, and electric emergency/auxiliary heater. • The DHW cylinder is an enamelled steel cylinder with directly applied foam insulation. It is equipped with an internal indirect coil and a magnesium anode for additional corrosion protection. The buffer cylinder is also a steel cylinder with directly applied foam insulation.Efficiency • Specific matching of the cylinder volume and the indirect coil surface area to the application ensures low standby losses.Installation • The integral carrying aids facilitate transportation to the installation site.HSBC 180 S Plus (GB) Set HSBC 180 S Plus (GB) SetPart number 204551Price excl. VAT £ 4,789.00 Specification Energy efficiency class BNominal capacity, DHW cyl-inderl 178Nominal capacity, buffer cyl-inderl 80Surface area, heat exchanger m² 1.59Capacity, heat exchanger l 10Standby energy consump-tion/24 h at 65 °CkWh 1.29Height mm 1910Width mm 605Depth mm 917Height when tilted mm 2063Weight kg 134 Recommended accessories Part number 204642Type CDT 180Description Cooling accessoriesPrice excl. VAT £ 290.00 Availability on request

Product information 2024 - Subject to technical modifications.Integral cylinderWith integral buffer cylinder159HSBC 225 S 1Benefits › Space saving positioning thanks to integration of DHW cylinder, buffer cylinder and hydraulic working parts into a single appliance › Suitable for high DHW demand thanks to large-area heat exchanger › The integral cylinder for DHW heating is combined with a heating heat pump and integrated into the heating system. › Installation requires little effort thanks to high level of integration including WPM heat pump manager › HSBC225S1 is sold as part of a package with heat pump models WPL-A07HKPremium, WPL17Classic or WPL25ACS.Application • This integral cylinder is suitable for DHW heating in heat pump operation and at the same time can be integrated into heating systems to form the hydraulic connection. It is used for delivery to/separation between the heat pump and heating circuit. • Designed for heating in family houses.Convenience features • The integral cylinder consists of a stainless steel cylinder with directly applied foam insulation and an internal indirect coil. The buffer cylinder is integrated. All components for the hydraulic connection are also in-cluded. • The heat pump manager, cylinder charging pump, circulation pump and 3/2-way diverter valve are included.Installation • Thanks to its compact, highly integrated design, the integral cylinder takes up very little space within the building. Stainless steel cylinder for easy transportation to the installation site.Efficiency • Low standby losses because both the cylinder volume and the indirect coil surface area are matched to the application.HSBC 225 S 1 HSBC 225 S 1 NEWPart number 206045Price excl. VAT £ 3,650.00 Specification Energy efficiency class ANominal capacity, buffer cyl-inderl 65Surface area, heat exchanger m² 3.10Standby energy consump-tion/24 h at 65 °CkWh 1.82Height mm 1776Width mm 765Depth mm 685Height when tilted mm 1870Weight kg 79.5 8

Product information 2024 - Subject to technical modifications.Integral cylinderWith integral buffer cylinder160HSBC 220 SBenefits › The integral cylinder for DHW heating is combined with a heating heat pump and integrated into the heating system. › Space saving positioning thanks to integration of DHW cylinder, buffer cylinder and hydraulic working parts into a single appliance › Suitable for high DHW demand thanks to large-area heat exchanger › Simple operation through integrated heat pump managerApplication • This integral cylinder is suitable for DHW heating in heat pump mode. It can be used to heat a fam-ily house (new or existing building). • The unit is prepared for the optional connection of another heating circuit. • The appliance simplifies hydraulic connection in heating systems, as the heat pump and heating circuit flows are separated by means of an integral buffer cylinder. This means that the integral cylinder can be used in various heat distribution systems.Convenience features • The DHW cylinder and buffer cylinder are stainless steel cylinders with directly applied foam insulation. The DHW cylinder has an internal indirect coil. • The two cylinders are mounted one above the other to save space. The heat pump manager, cylinder charging pump, circulation pump and 3/2-way diverter valve are included in the standard delivery. • Easy handling.Efficiency: • Standby losses are low, because the cylinder volume and indirect coil surface area are matched to the demand. HSBC 220 NEWPart number 206641Price excl. VAT £ 3,650.00 Specification Energy efficiency class ANominal capacity, DHW cyl-inderl 285Nominal capacity, buffer cyl-inderl 85Surface area, heat exchanger m² 3.00Capacity, heat exchanger l 14.3Standby energy consump-tion/24 h at 65 °CkWh 1.20Height mm 1760Width mm 755Depth mm 695Height when tilted mm 1851 HSBC 220 S

Integral cylinder Without integral buffer cylinderProduct information 2024 - Subject to technical modifications.Integral cylinderWithout integral buffer cylinder161HSBB 180 S Plus (GB) SetBenefits › The integral cylinder for DHW heating is combined with a heating heat pump and integrated into the heating system. › Space saving positioning, as the DHW cylinder and hydraulic parts are integrated in a single appliance › Can be used for cooling via area heating system or fan coil units (condensation resistance) › Installation requires little effort thanks to high level of integration including WPM heat pump managerApplication • This integral cylinder is used for DHW heating. The appliance is integrated into the heating system; it also connects the heat pump hydraulically to the heating circuit. • The integral cylinder is designed for heating and cooling in a family house and is optimised for use with an underfloor heating system.Convenience features • The DHW cylinder comprises an enamelled steel cylinder with foam insulation, an internal indirect coil and a magnesium anode for additional corrosion protection. The appliance can be used for cooling via underfloor heating system or fan coil units. • Equipment includes: WPM heat pump manager, DHW/heating circuit charging pump, 3/2-way diverter valve, safety valve with drain connector, and electric emergency/auxiliary heater. • Easy to transport thanks to integral carrying aids.Efficiency • Low standby losses.HSBB 180 S Plus (GB) Set HSBB 180 S Plus (GB) SetPart number 204552Price excl. VAT £ 3,110.00 Specification Energy efficiency class BNominal capacity, DHW cyl-inderl 178Surface area, heat exchanger m² 1.59Capacity, heat exchanger l 10Standby energy consump-tion/24 h at 65 °CkWh 1.29Height mm 1300Width mm 605Depth mm 917Height when tilted mm 1459Weight kg 99Suitable for Heat pump Recommended accessories Part number 204642Type CDT 180Description Cooling accessoriesPrice excl. VAT £ 290.00 Availability on request8

Product information 2024 - Subject to technical modifications.162

Accessories for heat pumps and cylindersAccessories for integral cylindersProduct information 2024 - Subject to technical modifications.Accessories for heat pumps and cylindersAccessories for integral cylinders163Accessories Accessories1648

Accessories for integral cylinders AccessoriesProduct information 2024 - Subject to technical modifications.Accessories for integral cylindersAccessories164HSBC (3)-HKMBenefits › Pump assembly for an additional heating circuit with mixer › Heating circuit connection: 22mm › Integral cylinder accessoriesDescription • The pump assembly mixer circuit adds a heating circuit with mixer to the integral cylinder. • The as-sembly comprises the insulated connection pipework, heating circuit pump and 3-way mixer with servomotor. It is intended for use inside the integral cylinder using the prepared connections.HSBC-HKM HSBC-HKM HSBC 3-HKMPart number 234648 238825Price excl. VAT £ 600.00 593.00 Specification Connection, heating circuit mm 22 22 RBS-SBCBenefits › Complete pipe assembly for quick installation › Simple routing of the DHW connections › Low energy losses thanks to high grade insulationDescription • With the insulated pipe assembly, the connections on the DHW side of integral cylinders are routed upwards behind the unit. From there, the hydraulic connections are made to the copper connectors. • The individual, preassembled connection lines are aligned by a mounting rail to be fitted on the integral cylinder.RBS-SBC RBS-SBCPart number 238827Price excl. VAT £ 278.00

Product information 2024 - Subject to technical modifications.Accessories for integral cylindersAccessories165CDTBenefits › Condensate pan with condensate pump for installation in the integral cylinder › Used for seasonal cooling below the dew point or for cooling without dew point monitoringDescription • The condensate pan with condensate pump is installed in an integral cylinder. • It needs to be used for seasonal cooling below the dew point temperature or if, for example, fan coil units provide cooling without dew point monitoring. • Without this accessory, cooling rooms is only permissible with dew point temperature monitoring. • Standard delivery includes the condensate pan with condensate pump, hose for external drainage, wiring harness for the electrical connection and installation accessories.CDT 180 CDT 180Part number 204642Price excl. VAT £ 290.00 8

Product information 2024 - Subject to technical modifications.166

Accessories for heat pumps and cylindersDHW cylinderProduct information 2024 - Subject to technical modifications.Accessories for heat pumps and cylindersDHW cylinder167DHW cylinder Accessories1688

DHW cylinder DHW cylinderProduct information 2024 - Subject to technical modifications.DHW cylinderDHW cylinder168SBB 301-501 WP SOL (GB) SetBenefits › DHW cylinders for use in combination with heating heat pumps › Large mixed water amount due to matched inlet and outlet flow technology › Large area heat exchanger for high DHW demand › Installation-friendly fittings including signal anode and flexible, multi-directional cold water connection › Additional application range thanks to integral solar indirect coil (type-dependent) › Additional application range thanks to integral solar indirect coil (Product: 228946, 228947)Application • This DHW cylinder is suitable for heat pump operation in family houses as well as apartment buildings, depending on the nominal capacity and the indirect coil surface area.Convenience features • The enamelled steel cylinder with directly applied foam insulation is equipped with an in-spection flange, T&P valve and a protective anode for additional corrosion protection. • An internal indirect coil for connecting the heat pump is integrated • A plug-in dial thermometer is included in the standard delivery. • The cylinder casing consists of a plastic outer jacket and a cylinder cover. Both can be removed during installation if required.SBB 302 WP (GB) Set SBB 302 WP (GB) Set SBB 401 WP SOL (GB) Set SBB 501 WP SOL (GB) SetPart number 228945 228946 228947Price excl. VAT £ 2,456.00 2,722.00 2,986.00 Specification Energy efficiency class C C Nominal capacity l 290 391 493Surface area, heat exchanger, topm² 4.80 4.00 5.00Surface area, heat exchanger, bottomm² 1.40 1.40Height mm 1770 1940 2044Diameter mm 700 750 810Height when tilted mm 1750 1930 2030Weight, empty kg 184 219 260 Recommended accessories Part number 232628 232628Type WRV 32 WRV 32Description Corrugated pipe connector for indirect coilsCorrugated pipe connector for indirect coilsPrice excl. VAT £ 148.00 148.00 The max. recommended collector aperture area relates to STIEBEL ELTRON flat-plate collectors. (Product: 228946, 228947)

Product information 2024 - Subject to technical modifications.DHW cylinderDHW cylinder169SBB 300-500-1 Plus (GB)Benefits › DHW cylinders for use in combination with heating heat pumps › Low standby losses and matched inlet and outlet technology for efficient operation › The surface areas of the heat exchanger are tailored to the output ranges of the recommended heat pumpsApplication • This DHW cylinder is suitable for heat pump operation in family houses as well as apartment buildings, depending on the nominal capacity and the indirect coil surface area.Convenience features • The enamelled steel cylinder, with foam insulation applied directly in the plastic jacket, is equipped with a protective anode for additional corrosion protection. • The appliance has an inspection flange and a connector for an electric threaded immersion heater. • The heat pump is connected via an internal indirect coil. • A plug-in dial thermometer is included in the standard delivery. • The cylinder casing consists of a permanently attached plastic jacket and a cylinder cover.Efficiency • Low standby losses and matched inlet and outlet technology ensure efficient operation.SBB 300-1 Plus GB SBB 300-1 Plus GB SBB 400-1 Plus GB SBB 500-1 Plus GBPart number 202923 202924 202925Price excl. VAT £ 1,459.00 1,526.00 1,881.00 Specification Energy efficiency class B B BNominal capacity l 326 418 522Surface area, heat exchanger, topm² 2.00 2.60 3.20Height mm 1619 1799 1904Diameter mm 650 730 780Height when tilted mm 1750 1946 2063Weight, empty kg 111 139 182 8

Product information 2024 - Subject to technical modifications.170

Accessories for heat pumps and cylindersAccessories for DHW cylindersProduct information 2024 - Subject to technical modifications.Accessories for heat pumps and cylindersAccessories for DHW cylinders171Accessories Accessories1728

Accessories for DHW cylinders AccessoriesProduct information 2024 - Subject to technical modifications.Accessories for DHW cylindersAccessories172WRV 32-40Benefits › Thermally insulated corrugated pipe › Available in two nominal diametersDescription • The corrugated pipe connector is used to connect the lower and upper indirect coils. • Standard delivery includes the threaded end and a union nut.WRV 32 WRV 32 WRV 40Part number 232628 232629Price excl. VAT £ 148.00 267.00 Specification Nominal diameter, corrugated pipe DN 32 DN 40Union nut fitting connection G 1 1/2 G2

Accessories for heat pumps and cylindersInstantaneous water cylindersProduct information 2024 - Subject to technical modifications.Accessories for heat pumps and cylindersInstantaneous water cylinders173Instantaneous water cylinders Accessories1748

Instantaneous water cylinders Instantaneous water cylindersProduct information 2024 - Subject to technical modifications.Instantaneous water cylindersInstantaneous water cylinders174SBS 601-1501 W (GB) SetBenefits › Efficient operation through inlet device for demand-dependent, zoned charging › Highly versatile, as it can be combined with various heat generators › Space saving combination of heating buffer cylinder and DHW heating in a single unit › Hygienic DHW heating through instantaneous water heater principleApplication • This combination instantaneous water cylinder makes DHW available. The appliance can be used simul-taneously as a buffer cylinder for hydraulic separation between the heat pump and heating circuit, and is also suitable for storing heating energy. • The instantaneous water cylinder is suitable for family houses. If several appliances are hydraulically interconnected, they can be used in apartment buildings.Convenience features • The steel cylinder is equipped with an integral corrugated pipe indirect coil made of stainless steel. The appliance provides DHW instantaneously. • The connectors facing the front allow system-specific hydraulic connections. • An additional electric threaded immersion heater can be installed via the inspection port if required.Efficiency • Low standby losses if the thermal insulation available as an accessory is used. • Matched inlet and out-let technology with integral PRO temp-Flow inlets ensures good temperature stratification. This reduces the flow turbulence considerably.SBS 601 W Set SBS 601 W Set SBS 801 W Set SBS 1001 W Set SBS 1501 W SetPart number 236481 236482 236483 236484Price excl. VAT £ 2,986.00 3,384.00 3,782.00 4,776.00 Specification Nominal capacity l 613 759 941 1430Area of DHW cylinder heat exchangerm² 6.00 6.50 8.70 10.00Height incl. thermal insulation mm 1,775 1,940 2,350 2,265Diameter incl. thermal insu-lationmm 970 1,010 1,010 1,220Height when tilted mm 1,840 1,880 2,285 2,225Weight kg 135 150 175 236 The max. recommended collector aperture area relates to STIEBEL ELTRON flat-plate collectors.

Accessories for heat pumps and cylindersAccessories for instantaneous water cylindersProduct information 2024 - Subject to technical modifications.Accessories for heat pumps and cylindersAccessories for instantaneous water cylinders175Accessories Accessories1768

Accessories for instantaneous water cylindersAccessoriesProduct information 2024 - Subject to technical modifications.Accessories for instantaneous water cylindersAccessories176WDH 601-1501 SBSBenefits › Graphite inserts for good insulation properties › Two insulation semi-shells to make it easier to match the shape › Composite thermal insulation made from rigid foam and fleeceDescription • The high grade thermal insulation made from EPS rigid foam is supplied with insulated cover and floor disc. Graphite inserts in the EPS and the fleece ensure minimal heat losses. • The thermal insulation can be optimally adapted to the cylinder thanks to the wedge-shaped cut-outs and the fleece layer. The prepared adhesive joints in the wedge-shaped cut-outs also contribute to this. • The integrated quick-release hook strip makes it easier to attach the thermal insulation.WDH 601 SBS WDH 601 SBS WDH 801 SBS WDH 1001 SBS WDH 1501 SBSPart number 231925 231926 231927 231928Price excl. VAT £ 710.00 737.00 852.00 966.00 Specification Insulation for SBS 601 W, W SOL SBS 801 W, W SOL SBS 1001 W, W SOL SBS 1501 W, W SOLThermal insulation thickness mm 110 110 110 110Standby energy consump-tion/24 h at 65 °CkWh 2.60 2.90 3.50 4.10 UBS-VL RLBenefits › Complete pipe assembly for quick installation › Incl. diverter valve for stratified charging › Thermally insulated pipesApplication • Insulated pipe assembly with diverter valve. Straightforward connection of instantaneous water heaters for stratified charging. Not suitable for 1501! • The pipe sections for flow and return are included and can be cut to length depending on type of cylinder. • The assembly is installed upstream of the cylinder using union nuts. Any orientation of the heat pump connection at the side is possible.UBS-RL UBS-RL UBS-VLPart number 238490 238489Price excl. VAT £ 480.00 474.00 Specification Connection, heat pump mm 42 42

Accessories for heat pumps and cylindersBuffer cylinderProduct information 2024 - Subject to technical modifications.Accessories for heat pumps and cylindersBuffer cylinder177Buffer cylinder Accessories1788

next page >Buffer cylinder Buffer cylinderProduct information 2024 - Subject to technical modifications.Buffer cylinderBuffer cylinder178SBP 100 PlusBenefits › Floorstanding buffer cylinder for integration into the heating system › Particularly space saving for use in family homesApplication • This buffer cylinder provides hydraulic separation between the heat pump flow and heating circuit flow. • The steel cylinder with directly applied foam insulation is equipped with a protective cover and connections at the side for ventilation and draining. • Reduced mixing due to matched inlet and outlet technology.SBP 100 PlusSpecification Energy efficiency class CNominal capacity l 100Standby energy consump-tion/24 h at 65 °CkWh 1.50Height mm 750Diameter mm 542Weight kg 140 STH 210-720-1 PlusBenefits › Easy to transport at the installation site as the casing can be removed if necessary › Suitable for cooling due to complete thermal foam insulation of the cylinder › Efficient thermal insulation allows use in heating and cooling modes › Low standby losses for efficient operation › Buffer cylinder for heat pump heating systemsApplication • These buffer cylinders are suitable for heat pump heating systems and can also be used in cooling mode. • Provides hydraulic separation between the heat pump and the heating/cooling circuit, extends heat pump runtimes and stores heating energy. • Suitable for use in family houses, depending on nominal capacity. • A threaded immersion heater can be used to increase the on-site PV consumption rate. The STH 720-1 Plus appliance can also be combined with a solar thermal system.Convenience features • The steel cylinder with directly applied foam insulation has hydraulic connectors arranged at the front, one above the other. Connectors are also provided for electric threaded immersion heaters if required. • The cylinder casing consists of the plastic outer jacket, the cylinder cover and a plinth trim.Efficiency • Low standby losses. • The buffer cylinders are designed for connecting heat pumps with high flow rates on the primary side.STH 210 Plus STH 210 Plus STH 415 Plus STH 720 Plus STH 720-1 PlusPart number 203763 203764 203765 203766Price excl. VAT £ 911.00 1,103.00 1,785.00 1,986.00 Specification Energy efficiency class B B Nominal capacity l 207 415 720 703Surface area, heat exchanger, bottomm² 2

Product information 2024 - Subject to technical modifications.Buffer cylinderBuffer cylinder179 STH 210 Plus STH 415 Plus STH 720 Plus STH 720-1 PlusStandby energy consump-tion/24 h at 65 °CkWh 1.10 1.60 2.20 2.20Height mm 1535 1710 1890 1890Diameter incl. thermal insu-lationmm 630 750 910 910Height when tilted mm 1650 1800 2000 2000Weight kg 58 81 185 216 Recommended accessories Part number 003711 003711 003711 003711Type ET SBP ET SBP ET SBP ET SBPDescription Inserts Inserts Inserts InsertsPrice excl. VAT £ 69.00 69.00 69.00 69.00 Availability on requestSBP 1000-1500 E SOLBenefits › Buffer cylinder for heating systems with large heat pumps › Highly versatile, as it can be combined with various heat generators › The buffer cylinder is designed for high flow rates with suitably sized flanged connections › Additional application range thanks to integral solar indirect coil (Product: 227566)Application • This buffer cylinder is combined with heating heat pumps in a large scale system and is suitable for use in apartment buildings and commercially used buildings. The appliance enables hydraulic separation between the heat pump and heating circuit flows, extends the operating time of the heat pump and stores heating energy.Convenience features • The steel cylinder has flange connections arranged at the front, one above the other, for the primary and secondary circuit. There is also an additional connector for combination with further heat generators. An additional indirect coil or an electric flanged immersion heater can also be fitted as required for the specific system. For this purpose, a flanged aperture sealed with a blank flange has been integrated. The SOL types are, in addition, equipped with an internal smooth tube solar indirect coil.Efficiency • Low standby losses in conjunction with the high grade thermal insulation as an accessory. • The matched inlet and outlet technology is responsible for the good temperature stratification. • The buffer cylinder is designed for connecting heat pumps with high flow rates on the primary side.SBP 1000 E SBP 1000 E SBP 1000 E SOL SBP 1500 E SBP 1500 E SOLPart number 227564 227566 227565 227567Price excl. VAT £ 1,933.00 2,046.00 2,032.00 2,999.00 Specification Nominal capacity l 1006 979 1503 1473Surface area, heat exchanger, bottomm² 3.00 3.60Max. permissible pressure MPa 0.30 0.30 0.30 0.30Height incl. thermal insulation mm 2340 2340 2255 2255Diameter incl. thermal insu-lationmm 1010 1010 1220 1220Height when tilted mm 2335 2335 2250 2250Weight kg 172 219 229 285 Required accessories Part number 231929 231929 Type WDH 1000 SBP WDH 1000 SBP Description Thermal insulation Thermal insulation Price excl. VAT £ 765.00 765.00 Part number 231930 231930Type WDH 1500 SBP WDH 1500 SBPDescription Thermal insulation Thermal insulationPrice excl. VAT £ 878.00 878.00 8

Product information 2024 - Subject to technical modifications.180

Accessories for heat pumps and cylindersAccessories for buffer cylindersProduct information 2024 - Subject to technical modifications.Accessories for heat pumps and cylindersAccessories for buffer cylinders181Accessories Accessories1828

next page >Accessories for buffer cylinders AccessoriesProduct information 2024 - Subject to technical modifications.Accessories for buffer cylindersAccessories182WPKI 5Benefits › All parts are included in the compact installation › Straightforward connection of a heating heat pump to a 200-700litre buffer cylinder › Only for heat pumps WITHOUT integral heating circuit pump › Including insulation assembly for flow/return connector (Product: 205875) › For heating heat pumps without integral circulation pump (Product: 205875) › Integral non-return valve (Product: 205875)Application • This compact installation includes all the components needed for the hydraulic connection of the heat-ing heat pump to buffer cylinders with 200 to 700 litres. • The standard delivery includes: insulation, safety valve, thermometer/pressure gauge, shut-off valves, non-return valve and the option to connect a diaphragm expansion vessel, plus the DHW heating set. • The compact installation is only suitable for heating heat pumps without an integral heating circuit pump.WPKI 5-I WPKI 5-IPart number 205875Price excl. VAT £ 468.00 Specification Connection G 1 1/4Max. operating pressure MPa 0.30 Required accessories Part number 201620Type UP 25/7.5 PCVDescription Heating circuit pumpPrice excl. VAT £ 200.00 BBI 5Benefits › Robust complete set for straightforward installation › With integral non-return valve › Only for heat pumps WITHOUT integral heating circuit pump › Integral non-return valve (Product: 205877)Description • The DHW heating kit is suitable for the compact installation of the buffer cylinder. • Contains all required components for the hydraulic connection of the heat pump to the DHW cylinder, including the insulation.BBI 5-I BBI 5-IPart number 205877Price excl. VAT £ 148.00 Specification Connection G 1 1/4 / Cu 28 x 1.5Max. operating pressure MPa 0.30

Product information 2024 - Subject to technical modifications.Accessories for buffer cylindersAccessories183 BBI 5-IRequired accessories Part number 201620Type UP 25/7.5 PCVDescription Heating circuit pumpPrice excl. VAT £ 200.00Part number 205875Type WPKI 5-IDescription WPKI 5 Compact installationPrice excl. VAT £ 468.00 WPKI 6Benefits › For heat pumps WITH an integral heating circuit pump › Straightforward connection of a heating heat pump to a 200-700litre buffer cylinder › All parts are included in the compact installation › Including insulation assembly for flow/return connector (Product: 205876) › For heating heat pumps with integral circulation pump (Product: 205876)Description • The compact installation is suitable for the hydraulic connection of the heating heat pump (with in-tegral heating circuit pump) to buffer cylinders with 200-700 l capacity. • All necessary components, including the insulation, are supplied.WPKI 6-I WPKI 6-IPart number 205876Price excl. VAT £ 274.00 Specification Connection G 1 1/4Max. operating pressure MPa 0.30 ET SBPBenefits › SBP connection accessories › For a tight fitting pipe connection without compact installation › Standard delivery: 4 inserts, 4 gaskets, 4 G4union nutsDescription • The adaptor fittings with female threads are suitable for the hydraulic connection of buffer cylinders with 200-700 l capacity. • The fittings are only required if a compact installation is not used.ET SBP ET SBPPart number 003711Price excl. VAT £ 69.00 8

Product information 2024 - Subject to technical modifications.Accessories for buffer cylindersAccessories184WDH 1000-1500 SBPBenefits › Composite thermal insulation made from rigid foam and fleece › Graphite inserts for good insulation properties › Two insulation semi-shells to make it easier to match the shapeDescription • The high grade thermal insulation made from EPS rigid foam is supplied with insulated cover and floor disc. Graphite inserts in the EPS and the fleece ensure minimal heat losses. • The thermal insulation can be optimally adapted to the cylinder thanks to the wedge-shaped cut-outs and the fleece layer. The prepared adhesive joints in the wedge-shaped cut-outs also contribute to this. • The integrated quick-release hook strip makes it easier to attach the thermal insulation.WDH 1000 SBP WDH 1000 SBP WDH 1500 SBPPart number 231929 231930Price excl. VAT £ 765.00 878.00 Specification Insulation for SBP 1000 E and E SOL SBP 1500 E and E SOLThermal insulation thickness mm 110 110Standby energy consump-tion/24 h at 65 °CkWh 3.60 4.10

Accessories for heat pumps and cylindersAdditional accessoriesProduct information 2024 - Subject to technical modifications.Accessories for heat pumps and cylindersAdditional accessories185Electric threaded immersion heaters and flanged immersion heaters Accessories1868

next page >Additional accessories Electric threaded immersion heaters and flanged immersion heatersProduct information 2024 - Subject to technical modifications.Additional accessoriesElectric threaded immersion heaters and flanged immersion heaters186BGCBenefits › For matching to individual usage scenarios › High hot water convenience thanks to powerful heating elements › Variable temperature setting via rotary selectorApplication • This threaded immersion heater is suitable for sealed unvented heating systems and DHW heating systems. • The temperature can be variably adjusted; temperature limitation is possible. • The integral temperature controller is equipped with a high limit safety cut-out.BGC 6 kW 500 mm ET BGC 6 kW 500 mm ET BGC/45Part number 003769 075115Price excl. VAT £ 261.00 274.00 Specification Connected load ~ 230 V kW 2-5,7 2-5,7Connected load ~ 400 V kW 6 6Power supply 1/N/PE, 2/PE, 3/PE 1/N/PE, 2/PE, 3/PERated voltage V 230/400 230/400Frequency Hz 50/60 50/60Version Universal flange Universal flangeIP rating IP 44 IP 44Immersion depth mm 500 455 FCRBenefits › Replaceable copper heating element › For matching to individual usage scenarios › High hot water convenience thanks to powerful heating elements › Variable temperature setting via rotary selectorDescription • The flanged immersion heaters are suitable for horizontal installation in unvented DHW cylinders with flange connectors to DIN 4805. • The temperature can be variably adjusted. It is possible to limit the temperature. • Please note the details supplied by the cylinder manufacturer, as well as DIN 4753 and DIN 4751.FCR 21/60 FCR 21/60 FCR 21/120 FCR 28/120 E FCR 28/180 EPart number 071330 071331 000694 000695Price excl. VAT £ 1,011.00 958.00 1,083.00 1,095.00 Specification Connected load ~ 230 V kW 2-4 4 Connected load ~ 400 V kW 2-6 8/12 12 18Power supply 1/N/PE, 3/N/PE 1/N/PE, 2/N/PE, 3/PE 3/PE 3/PERated voltage V 230/400 230/400 400 400Coil voltage V 230 230 400 400Frequency Hz 50/60 50/60 50 50

Product information 2024 - Subject to technical modifications.Additional accessoriesElectric threaded immersion heaters and flanged immersion heaters187 FCR 21/60 FCR 21/120 FCR 28/120 E FCR 28/180 EVersion Dual/single circuit Single circuit Single circuit Single circuitIntegral contactor X - X XIP rating IP 24 IP 24 IP 24 IP 24Immersion depth mm 400 400 325 325Flange diameter mm 210 210 280 280 (Product: 000694)Temperature controller with frost protection setting (external), temperature limit possible, integral pushbutton for rapid heat-up, high limit safety cut-out, flange gasket, protective cover with two cable entries. Temperature controller with frost protection setting, high limit safety cut-out, flange gasket, protective cover with two cable entries. (Product: 000694, 000695) (Product: 000694)8

Product information 2024 - Subject to technical modifications.188

Accessories for heat pumps and cylindersHeat pump accessoriesProduct information 2024 - Subject to technical modifications.Accessories for heat pumps and cylindersHeat pump accessories189DHW heating Accessories190Heating system hydraulics Accessories191Additional accessories Accessories1978

Heat pump accessories DHW heatingProduct information 2024 - Subject to technical modifications.Heat pump accessoriesDHW heating190UPZBenefits › Highly efficient DHW circulation pump › Time switch included in standard delivery › Adjustable shutdown temperature › Low heat losses thanks to high grade insulation shellApplication • DHW circulation pump with automatic ventilation mode, suitable for detached houses and apartment buildings. • The highly efficient DHW circulation pump can be controlled via the electronic control thermostat and/or the time switch. • The pump shutdown temperature can be adjusted by means of a rotary selector – this allows the pump runtime and the electronic energy demand for DHW provision to be reduced to a minimum. • Insulation shell, time switch and non-return valve are included in the standard delivery.UPZ UPZPart number 233719Price excl. VAT £ 327.00 Specification Connection G 1/2Power consumption W 2 - 27Rated voltage V 220-240Control via 0-10 V signal with IF module -Control via PWM signal -Installation length (centre distance)mm 65 UP BBenefits › Circulation pump, DHW circuit › 3-stage electronic control › Inserts included in the deliveryDescription • The circulation pump for the DHW circuit can be controlled electrically in three stages. • Inserts are included in the standard delivery.UP 25-60-180 UP 25-60-180Part number 056899Price excl. VAT £ 281.00 Specification Connection G 2Power consumption W 46/67/93Rated voltage V 230Installation length (centre distance)mm 180

Heat pump accessories Heating system hydraulicsProduct information 2024 - Subject to technical modifications.Heat pump accessoriesHeating system hydraulics191UPBenefits › Electronically controlled circulation pump with variable differential control › Energy efficiency index (EEI): 0.20 › Delivery head max. 10m › Can be controlled via either a PWM signal or differential pressure (Product: 201620) › 0-10 V actuation possible with IF module (Product: 227422, 227423, 206633, 206636)Description • The heating circuit pump is particularly energy efficient, as electronic output control is integrated for pumping the heat transfer medium, as is variable differential control.UP 25/7.5 PCV UP 25/7.5 PCV UP 25/1-8 PCV UP 30/1-8 PCV UP 40/1-8 E DISCONT.PRODUCTPart number 201620 205285 205286 227422Price excl. VAT £ 200.00 407.00 407.00 1,449.00 Specification Energy Efficiency Index EEI 0.20 0.20 0.20 0.23Connection G 1 1/2 G 1 1/2 G 2 DN 40Delivery head m 8.40 8.00 8.00 8.00Max. flow rate m³/h 4.00 9.50 9.00 15.00Power consumption W 10-60 200 130 12-310Rated voltage V 230 230 230 230Control via 0-10 V signal with IF module - x x xControl via differential pressure x x x xControl via PWM signal x x x -Installation length (centre distance)mm 180 180 180 220 UP 50/1-12 E UP 40/1-8 E UP 50/1-12 E DISCONT.PRODUCTNEW NEWPart number 227423 206633 206636Price excl. VAT £ 1,859.00 1,450.00 1,850.00 Specification Energy Efficiency Index EEI 0.23 0.23 0.23Connection DN 50 DN 40 DN 50Delivery head m 12.00 8.00 12.00Max. flow rate m³/h 29.00 15.00 29.00Power consumption W 25-590 12-310 25-590Rated voltage V 230 230 230Control via 0-10 V signal with IF module x x xControl via differential pressure x x xControl via PWM signal - - -Installation length (centre distance)mm 280 220 280 Standard delivery: Insulation shell (Product: 201620, 227422, 227423) 8

next page >Product information 2024 - Subject to technical modifications.Heat pump accessoriesHeating system hydraulics192WPKI-HKBenefits › Pump assembly for heating circuit without mixer › For combination with SBP200E, SBP400E and SBP700E buffer cylindersDescription • The pump assembly is suitable for one heating circuit without mixer. The standard delivery includes the integral high efficiency heating circuit pump, shut-off valves with thermometer and gravity brake, including opening mechanism and the EPP complete insulation set with wall mounting bracket. • The pump assembly can be installed either directly on the buffer cylinder or on the wall.WPKI-HK DN 25 WPKI-HK DN 25 NEWPart number 206627Price excl. VAT £ 572.00 Specification Connection, above G 1Connection, below G 1 1/2 AHeight mm 383Width mm 250Depth mm 213Energy Efficiency Index EEI 0.20Delivery head m 6.70Max. flow rate m³/h 7.80 WPKI-HKM 24Benefits › Including thermal insulation and wall mounting bracket › Complete with built-in high efficiency pump and 24V mixer motor › Pump assembly for heating circuit with mixerDescription • Pump assembly for one heating circuit with mixer. • Included in the standard delivery are the integral high efficiency pump, a 24 V mixer motor, shut-off valves and thermometers for the flow and return. Also included in the standard delivery are a gravity brake and the EPP complete insulation set with wall mounting bracket. • The pump assembly can be installed either on the buffer cylinder or on the wall.WPKI-HKM 24 DN 32 WPKI-HKM 24 DN 32 WPKI-HKM 24 DN 40 NEW NEWPart number 206628 206632Price excl. VAT £ 1,519.00 3,439.00 Specification Connection, above 1 1/2 IConnection, below G 2 A Circulation pump type Wilo Yonos MAXO plus 30/0.5-10

Product information 2024 - Subject to technical modifications.Heat pump accessoriesHeating system hydraulics193 WPKI-HKM 24 DN 32 WPKI-HKM 24 DN 40Height mm 441 811Width mm 250 320Depth mm 293 554Energy Efficiency Index EEI 0.20 0.20Delivery head m 10.00 12.00Max. flow rate m³/h 11.40 17.70 WPKI-HKM 230Benefits › Heating circuit assembly with mixing valve › Complete with high efficiency pump, shut-off valves and gravity valves › Including thermal insulation and wall mounting bracket › Complete with built-in high efficiency pump and 230V mixer motor › Pump assembly for heating circuit with mixerDescription • Pump assembly for one heating circuit with mixer. • Included in the standard delivery are the integral high efficiency pump, a 230 V mixer motor, shut-off valves and thermometers for the flow and return. Also included in the standard delivery are a gravity brake and the EPP complete insulation set with wall mounting bracket. • The pump assembly can be installed either on the buffer cylinder or on the wall.WPKI-HKM 230 DN 25 WPKI-HKM 230 DN 25 NEWPart number 206631Price excl. VAT £ 558.00 Specification Connection, above G 1Connection, below G 1 1/2 AHeight mm 383Width mm 250Depth mm 245Energy Efficiency Index EEI 0.20Delivery head m 6.00Max. flow rate m³/h 5.70 8

Product information 2024 - Subject to technical modifications.Heat pump accessoriesHeating system hydraulics194WPKI-HKV 2Benefits › Straightforward installation of two pump assemblies next to each other › Makes it easier to ensure a tidy, visually appealing installation › EPP thermal insulation included in the deliveryDescription • The manifold is suitable for the fast and visually high quality installation of up to two heating circuit pump assemblies. • The standard delivery includes the high grade EPP insulation and all required fittings for wall mounting the manifold.WPKI-HKV 2 WPKI-HKV 2 NEWPart number 206638Price excl. VAT £ 301.00 Specification Connection DN 25 WPKI-HKV 3Benefits › Straightforward installation of up to three pump assemblies next to each other › Makes it easier to ensure a tidy, visually appealing installation › EPP thermal insulation included in the deliveryDescription • The manifold is suitable for the fast and visibly high quality installation of up to three heating circuit pump assemblies. • The standard delivery includes the high grade EPP insulation and all required fittings for wall mounting the manifold.WPKI-HKV 3 WPKI-HKV 3 NEWPart number 206637Price excl. VAT £ 406.00 Specification Connection DN 25

Product information 2024 - Subject to technical modifications.Heat pump accessoriesHeating system hydraulics195HUVBenefits › The ready-to-use actuator is supplied installed on the 3-way diverter valve › Can be installed vertical to horizontal › Maintenance-freeDescription • The 3-way heating diverter valve with servomotor is suitable for installation in heating systems.HUV 1 HUV 1 HUV 2Part number 227420 223391Price excl. VAT £ 340.00 752.00 Specification Connection G1 G 2kVS value m³/h 26 49IP rating IP 54 IP 54Runtime 90 s / 90° 90 s / 90°Weight kg 1.65 4.80 HUKBenefits › Set with two changeover dampers › Robust design for a long service life › Available for various dimensionsDescription • The changeover damper with servomotor is suitable for installation in heating systems. • Connected via a flange with lug eyes.HUK 100 Set HUK 100 Set HUK 125 Set HUK 150 Set HUK 200 SetPart number 203711 203712 203713 203714Price excl. VAT £ 1,944.00 2,034.00 3,619.00 4,248.00 Specification Connection DN 100 DN 125 DN 150 DN 200kVS value m³/h 150 260 400 820Leakage rate tight, leakage rate A (EN 12266-1)tight, leakage rate A (EN 12266-1)tight, leakage rate A (EN 12266-1)tight, leakage rate A (EN 12266-1)IP rating IP 54 IP 54 IP 66 IP 66Control Open/closed Open/closed Open/closed Open/closedRuntime 150 s / 90° 150 s / 90° 35 s / 90° 35 s / 90°Butterfly valve weight kg 4 6.7 7.4 14Rotary drive weight kg 4.1 4.1 5.8 5.8 Standard delivery includes: 2 butterfly valves each with a rotary drive.Availability on request8

Product information 2024 - Subject to technical modifications.Heat pump accessoriesHeating system hydraulics196FS-HPBenefits › Liquid and gaseous media in the pipework are monitored by the FS-HP flow switchDescription • The FS-HP flow switch can be used to reliably monitor liquid and gaseous media in pipelines. • A connec-tion adaptor to G 1/4“ and a five metre PUR cable with a 1/2“ plug-in connection are included in the standard delivery.FSHP-L45 FSHP-L45Part number 202779Price excl. VAT £ 658.00

Heat pump accessories Additional accessoriesProduct information 2024 - Subject to technical modifications.Heat pump accessoriesAdditional accessories197STB-FBBenefits › High limit safety cut-out forunderfloor heating › Setting of the maximum flow temperature › Installation on the heating pipeDescription • The contact thermostat made of bimetal limits the maximum permissible flow temperature. A casing is included in the standard delivery.STB-FB STB-FBPart number 233711Price excl. VAT £ 42.00 Specification Temperature setting range °C 20-90Switching hysteresis K 8±3IP rating IP 30 8

Product information 2024 - Subject to technical modifications.198

Ventilation Decentralised ventilationProduct information 2024 - Subject to technical modifications.VentilationDecentralised ventilation199Decentralised ventilation in residential buildings 202Accessories for decentralised ventilation in residential buildings 2089

Decentralised ventilation in residential buildingsApplication areasProduct information 2024 - Subject to technical modifications.Decentralised ventilation in residential buildingsApplication areas200 Air flow rate m³/h 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290300310 320 330 340 350 VLR 70 L Trend EU m³/h 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290300310 320 330 340 350 LA 100 A

Decentralised ventilation Decentralised ventilation in residential buildingsProduct information 2024 - Subject to technical modifications.Decentralised ventilationDecentralised ventilation in residential buildings201Supply and extract air with heat recovery VLR 70 S/L Trend202Extract air without heat recovery LA 100204Accessories2089

next page >Decentralised ventilation in residential buildingsSupply and extract air with heat recoveryProduct information 2024 - Subject to technical modifications.Decentralised ventilation in residential buildingsSupply and extract air with heat recovery202VLR 70 S/L TrendBenefits › Decentralised ventilation unit with heat recovery for new build and modernisation › Rapid, hygienic cleaning thanks to aluminium heat exchanger › Very good filter performance due to filters on the inside and outside › No condensate run marks on the wall face › Quick tool-free filter change and tool-free visual monitoring of the heat exchanger, due to compact design of fan unitApplication • This decentralised ventilation unit with heat recovery is used for ventilating apartments and small commercial properties.Convenience features • Contemporary design with separate programming unit. The appliance is suitable for living spaces and commercial premises up to approx. 100 m2. • Thanks to the axial fan that can overcome back-pressure, use in locations exposed to the wind is possible. • The appliance is equipped with an efficient heat exchanger made of aluminium. • The external panel is watertight against heavy rain; it is made of stainless steel and powder coated. The internal panel is made of plastic. • Straightforward filter replacement with easy-to-remove fan unit. Fine dust filters are available as accessories.Efficiency • EC fan ensures efficient operation.Installation • The unit is installed in a round or square wall outlet. • The easily accessible mains connection is located on the inside of the fan unit.VLR 70 L Trend EU VLR 70 L Trend EU NEWPart number 203133Price excl. VAT £ 309.00 Specification Sound power level LW total rel-ative to air flow ratedB(A) 36 (20 m³/h)Weight kg 5.20IP rating IP 21Air flow rate m³/h 20/30/40/49/70Rated voltage V 24Energy efficiency class, mod-erate climates, central de-mand-dependent control A+Height mm 285Width mm 360Depth mm 780 Required accessories Part number 239570Type VLR 70-2 CUDescription Control set for VLR 70Price excl. VAT £ 220.00Part number 239571Type VLR 70-4 CUDescription Control set for VLR 70Price excl. VAT £ 229.00Part number 239572Type VLR 70-8 CUDescription Control set for VLR 70Price excl. VAT £ 241.00 Maintenance Part number 201274Type SP VLR 70 RF EPM1 80 F9-4Description Filter for VLR 70Price excl. VAT £ 32.00

Product information 2024 - Subject to technical modifications.Decentralised ventilation in residential buildingsSupply and extract air with heat recovery203 VLR 70 L Trend EUPart number 239562Type SP VLR 70 RF COARSE 30 G2-4Description Filter for VLR 70Price excl. VAT £ 12.00Part number 239575Type SP VLR 70 RF COARSE 60 G4-4Description Filter for VLR 70Price excl. VAT £ 28.50Part number 239576Type SP VLR 70 RF EPM10 50 M5-4Description Filter for VLR 70Price excl. VAT £ 32.00Part number 239577Type SP VLR 70 RF EPM1 50 F7-4Description Filter for VLR 70Price excl. VAT £ 35.00 Decentralised ventilation unit VLR 70 L Trend EU with heat recovery (Product: 203133) 25825868D0000095588.ai 28435781D0000095589.ai9

Decentralised ventilation in residential buildingsExtract air without heat recoveryProduct information 2024 - Subject to technical modifications.Decentralised ventilation in residential buildingsExtract air without heat recovery204LA 100Benefits › Quiet operation (Product: 205771) › Fan unit for single ventilation units to DIN 18017-3 (Product: 205771) › Fan unit for surface mounting (Product: 205771)Application • This fan unit for extractors ventilates rooms with and without external windows.Convenience features • The casing, internal panel and filter holder are made from high quality white plastic. All appliances are equipped with a start delay and run-on time. If required, this can be extended by a humidity sensor. Subsequent extension of the control module is also possible in its installed state.Efficiency • The fan unit has a very energy efficient and quiet fan motor.Installation • Depending on the selected version, the appliances are suitable for installation in walls and ceilings or surface mounting. The electrical connection of the fan unit is easily accessible.LA 100 A LA 100 A NEWPart number 205771Price excl. VAT Specification Type of ventilation VentilationFilter class G3Filter class ePM10 ≥ 50 % (M5) | ISO Coarse > 45 % (G3)Max. power consumption W 15.3Power consumption at 30 m³/h W 2.2Power consumption at 60 m³/h W 4.5Power consumption at max. flow rateW 15.3Sound power level LWA dB(A) 47Sound power level LWA at 60 m³/hdB(A) 40Sound power level LWA at 30 m³/hdB(A) 33Weight kg 2.30IP rating IP X5Max. air flow rate m³/h 90 Recommended accessories Part number 205830Type ZLA 100-HDescription Control module with humidity controlPrice excl. VAT Part number 231104Type LWF W 100 VA - 60Description External wall outletPrice excl. VAT Maintenance Part number 201455Type FMS G3-5 LA 60Description Filter mat set for extract air fanPrice excl. VAT

Product information 2024 - Subject to technical modifications.Decentralised ventilation in residential buildingsExtract air without heat recovery205ZLA100-HBenefits › Demand-regulated control of the fan based on the air humidityDescription • Humidity sensor for extractors LA 100 A / U / UBZLA 100-H ZLA 100-H NEWPart number 205830Price excl. VAT Specification Power supply 1/N ~ 230 V 50 HzWidth mm 115Height mm 20Depth mm 170 LA 100 GBenefits › Fan unit for surface mounting (Product: 205906) › Fan unit for single ventilation units to DIN 18017-3 (Product: 205906) › Extremely quiet operation (Product: 205906)Application • Surface-mounted enclosure for extractor LA 100 A. LA 100 G-A LA 100 G-A NEWPart number 205906Price excl. VAT Specification Height mm 270Width mm 270Depth mm 136 9

Product information 2024 - Subject to technical modifications.Decentralised ventilation in residential buildingsExtract air without heat recovery206LA 100 VEBenefits › Fan unit for single ventilation units to DIN 18017-3 (Product: 205907) › Fan unit for flush mounting (Product: 205907) › Extremely quiet operation (Product: 205907)Description • Fan unit for extractors LA 100 A / U / UBLA 100 VE LA 100 VE NEWPart number 205907Price excl. VAT Specification Max. power consumption W 15.3Height mm 260Width mm 260Depth mm 50Power supply 1/N 230 V 50 HzAir flow rate m³/h 20/30/40/50/60/100 LWF W 100 VA - 60Benefits › Stainless steel with spherical protective cover › Wall outlet DN100 › Weather resistantDescription • Wall outlet for decentralised ventilation units.LWF W 100 VA - 60 LWF W 100 VA - 60 NEWPart number 231104Price excl. VAT

Decentralised ventilation Accessories for decentralised ventilation in residential buildingsProduct information 2024 - Subject to technical modifications.Decentralised ventilationAccessories for decentralised ventilation in residential buildings207Accessories for controllers Accessories208Filter Accessories2109

Accessories for decentralised ventilation in residential buildingsAccessories for controllersProduct information 2024 - Subject to technical modifications.Accessories for decentralised ventilation in residential buildingsAccessories for controllers208ZLWE 40 CO2Benefits › CO2 sensor with adjustable switching threshold › Adjustable hysteresisDescription • The CO2 sensor is used for demand-dependent, enhanced ventilation mode. • Standard delivery includes a sensor and the threshold switch.ZLWE CO2 ZLWE CO2 NEWPart number 236673Price excl. VAT £ 536.00 Specification Version Room sensorWidth mm 80Height mm 100Depth mm 28 VLR 70-2/4/8 CUBenefits › Matched accessories for VLR 70 › Simple to control via the ergonomic programming unit › Basic module including power supply unit and flush box (Product: 239570) › Number of fans per control unit: max. 2 (Product: 239570) › Number of fans per control unit: max. 4 (Product: 239571) › Expansion set for controlling additional fan units (Product: 239571, 239572) › Number of fans per control unit: max. 8 (Product: 239572)Description • The control set comprises control unit, power supply unit and programming unit for controlling the ventilation units. • An LED on the control unit reminds the user to clean or replace the filter. These signals are issued according to the operating time. • The programming unit is installed in the supplied flush box. • The power supply unit is designed for top hat rail mounting. VLR 70-2 CU VLR 70-2 CU VLR 70-4 CU VLR 70-8 CU NEW NEW NEWPart number 239570 239571 239572Price excl. VAT £ 220.00 229.00 241.00 Specification Number of fans per control unit max. 2 max. 4 max. 8Power supply 1/N 100-240 V 50/60 Hz 1/N 100-240 V 50/60 Hz 1/N 100-240 V 50/60 HzWidth mm 80 Height mm 80 Depth mm 9 User interface, control module, power supply, control panel with frame (Product: 239570) User interface, control module, power supply, frame (Product: 239571, 239572)

Product information 2024 - Subject to technical modifications.Accessories for decentralised ventilation in residential buildingsAccessories for controllers209ZLWE 40 HUMIDITYDescription • Humidity sensor for humidity-controlled operation in two different stages.ZLWE HUMIDITY ZLWE HUMIDITY NEWPart number 236674Price excl. VAT £ 232.00 Specification Version Room sensorMeasurement accuracy % rF 5Setting range, relative humidity % 30-90Measurement deviation per year% rF -1,5Switching differential % rF 6Width mm 76Height mm 76Depth mm 34Operating temperature range °C 0 to +40Ambient temperature °C 0 - 40Ambient temperature °C 0 – 40 °C 9

Accessories for decentralised ventilation in residential buildingsFilterProduct information 2024 - Subject to technical modifications.Accessories for decentralised ventilation in residential buildingsFilter210SP VLR 70 RFBenefits › Matched accessories for VLR 70 › Different filter classes available › 4 Filter for the Filter class G2 (Product: 239562) › 4 Filter for the Filter class F9 (Product: 201274) › 4 Filter for the Filter class F7 (Product: 239577)Description • Filter for VLR 70SP VLR 70 RF COARSE 30 G2-4 SP VLR 70 RF COARSE 30 G2-4 SP VLR 70 RF EPM1 80 F9-4 SP VLR 70 RF EPM1 50 F7-4 NEW NEW NEWPart number 239562 201274 239577Price excl. VAT £ 12.00 32.00 35.00 Specification Quantity 4 4 4Filter class ISO Coarse > 30 % (G2) ePM1 ≥ 80 % (F9) ePM1 ≥ 50 % (F7)Application Ventilation units Ventilation units Includes four G2 filters (Product: 239562) Includes four F9 filters (Product: 201274) Includes four F7 filters (Product: 239577) SP VLR 70 RF COARSE 60 G4-4Benefits › Set with four filters › Filter class G4Description • Filter for VLR 70SP VLR 70 RF COARSE 60 G4-4 SP VLR 70 RF COARSE 60 G4-4 NEWPart number 239575Price excl. VAT £ 28.50 Specification Quantity 4Filter class ISO Coarse > 60 % (G4) Includes four G4 filters (Product: 239575)

Product information 2024 - Subject to technical modifications.Accessories for decentralised ventilation in residential buildingsFilter211SP VLR 70 RF EPM10 50 M5-4Benefits › Filter class M5 › Set with four filtersDescription • Filter for VLR 70SP VLR 70 RF EPM10 50 M5-4 SP VLR 70 RF EPM10 50 M5-4 NEWPart number 239576Price excl. VAT £ 32.00 Specification Quantity 4Filter class ePM10 ≥ 50 % (M5) 9

Product information 2024 - Subject to technical modifications.212

Room heating Storage heaterProduct information 2024 - Subject to technical modifications.Room heatingStorage heater213Storage heater 216Accessories for storage heaters 22210

Storage heater Application areasProduct information 2024 - Subject to technical modifications.Storage heaterApplication areas214 Heating output W 820 1180 1630 1910 2400 2770 SHF 2000 SHF 3000 SHF 4000 SHF 5000 SHF 6000 SHF 7000 W 480 730 970 1170 1360 1590 1800 SHS 1200 SHS 1800 SHS 2400 SHS 3000 SHS 3600 SHS 4200 SHS 4800

Storage heater Storage heaterProduct information 2024 - Subject to technical modifications.Storage heaterStorage heater215Standard storage heater SHF 2000-7000216Slimline storage heater SHS 1200-480021810

next page >HHR = High Heat RetentionStorage heater Standard storage heaterProduct information 2024 - Subject to technical modifications.Storage heaterStandard storage heater216SHF 2000-7000Benefits › For convenient, energy saving operation, C-Plus technology is used as an intelligent automatic charging system. › Enable time for charging can be set directly on the appliance › Integral RT controller with weekly timer and open window detection › In timer mode, the self-learning control unit calculates the preheating time automatically › Increased safety, as the high limit safety cut-out does not reset automatically › The connected load can be reduced with a 3-phase connection › Quiet crossflow fan › As standard with fluff filterApplication • This compact storage heater is installed on the floor and is suitable as a standalone heater for apartments or commercial spaces. • The appliance is used with off-peak economy tariff models with blocking times.Convenience features • The integral electronic charge controller with C-Plus technology charges the storage heater fully automatically and according to demand, without additional control units. • The required room temperature and the enable time for charging can be easily adjusted on the display. • In addition to the programmable weekly timer, there are two preset and one individually programmable time programs available. • In timer mode, the comfort temperature is achieved at precisely the right time thanks to the adaptive control with learning function. • In addition to the comfort temperature, it is also possible to program the setback temperature. • If required, users are able to activate a function on the appliance which detects when windows are open; this avoids unnecessary energy loss. • With three-phase connection, the connected load can be reduced in four stages. • The control input for AC signals is configured at the factory; a control input for DC signals is available as an optional accessory. • An auxiliary heater can be integrated as an option. • Integral childproofing as the programming unit can be locked. • High heat retention capacity. • The storage heater is equipped as standard with a fluff filter and operates very quietly. • Installation • The appliance is installed directly on the floor, or off-floor on suitable floor brackets. • The single-phase or three-phase mains connection is easily accessible thanks to the hinged connection panel. A permanent control voltage is required.Safety • Integral high limit safety cut-out.SHF 2000 SHF 2000 (HHR) SHF 3000 (HHR) SHF 4000 SHF 5000 SHF 6000 SHF 7000Part number 200175 200176 200177 200178 200179 200180Price excl. VAT £ 660.00 710.00 782.00 842.00 947.00 1,060.00 Specification Power supply 1/N/PE, 3/N/PE 1/N/PE, 3/N/PE 1/N/PE, 3/N/PE 1/N/PE, 3/N/PE 1/N/PE, 3/N/PE 1/N/PE, 3/N/PEFrequency Hz 50/- 50/- 50/- 50/- 50/- 50/-Rated current A 2.9 4.3 5.8 7.2 8.7 10.1Rated connected load kW 2.00 3.00 4.00 5.00 6.00 7.00Fuse protection A 10 10 10 16 16 16Heating output W 820 1180 1630 1910 2400 2770Operating noise dB(A) 30 32 33 34 34 34Heat retention capacity % 47 52 55 56 59 60Height mm 650 650 650 650 650 650Width mm 605 780 955 1130 1305 1480Depth mm 275 275 275 275 275 275Weight kg 32 40 48 56 64 72Weight (incl. bricks) kg 116 169 220 266 316 373Number of brick packs 6 9 12 15 18 21Colour alpine white alpine white alpine white alpine white alpine white alpine white Recommended accessories Part number 238723 Type Zhzg. 0,35kW Description Auxiliary heater for storage heater Price excl. VAT £ 68.00

Product information 2024 - Subject to technical modifications.Storage heaterStandard storage heater217 SHF 2000 (HHR) SHF 3000 (HHR) SHF 4000 SHF 5000 SHF 6000 SHF 7000Part number 238724 Type Zhzg. 0,5kW Description Auxiliary heater for storage heater Price excl. VAT £ 68.00 Part number 238725 Type Zhzg. 0,8kW Description Auxiliary heater for storage heater Price excl. VAT £ 75.00 Part number 238726 Type Zhzg. 1kW Description Auxiliary heater for storage heater Price excl. VAT £ 75.00 Part number 238727 Type Zhzg. 1,2kW Description Auxiliary heater for storage heater Price excl. VAT £ 79.00 Part number 238728Type Zhzg. 1,5kWDescription Auxiliary heater for storage heaterPrice excl. VAT £ 83.00Core bricks included in the standard delivery.Overall depth = 30mm with wall clearance mesh10

next page >Storage heater Slimline storage heaterHHR = High Heat RetentionProduct information 2024 - Subject to technical modifications.Storage heaterSlimline storage heater218SHS 1200-4800Benefits › For convenient, energy saving operation, C-Plus technology is used as an intelligent automatic charging system. › Enable time for charging can be set directly on the appliance › Integral RT controller with weekly timer and open window detection › In timer mode, the self-learning control unit calculates the preheating time automatically › Increased safety, as the high limit safety cut-out does not reset automatically › The connected load can be reduced with a 3-phase connection › Quiet crossflow fan › As standard with fluff filterApplication • This compact slimline storage heater takes up only minimal space once installed on the floor or on the wall. • The appliance is suitable as a standalone heater for apartments or commercial spaces and is used with off-peak economy tariff models with blocking times. Convenience features • The integral electronic charge controller with C-Plus technology charges the appliance fully automatically and according to demand, without the need for additional control units. • The required room tempera-ture and the enable time for charging can be easily adjusted on the display. • In addition to the programmable weekly timer, 2 preset time programs and 1 individually programmable time program are provided. • In timer mode, the comfort temperature is achieved at precisely the right time thanks to the adaptive control with learning function. • If required, users are able to activate a function on the appliance which detects when windows are open; this avoids unnecessary energy loss. • In addition to the comfort temperature, it is also possible to program the setback tempera-ture. • The connected load can be reduced in four stages. • The control input for AC signals is configured at the factory; the control input for DC signals is available as an optional accessory. • An auxiliary heater can be integrated as an option. • Integral childproofing as the programming unit can be locked. • High heat retention capacity. • The storage heater is equipped as standard with a fluff filter. • Low-noise crossflow fans are integrated to ensure quiet operation.Installation • Installation as a wall mounted appliance with standard wall mounting brackets or directly on the floor. Off-floor installation with mounting brackets is also possible. Optional support brackets are available where walls do not have adequate load bearing capacity. • The single-phase or three-phase mains connection is straightforward even in recesses thanks to the hinged and easily accessible connection panel. A permanent control voltage is required.Safety • The storage heater is equipped with an integral high limit safety cut-out.SHS 1200 SHS 1200 SHS 1800 SHS 2400 (HHR) SHS 3000 (HHR)Part number 200181 200182 200183 200184Price excl. VAT £ 708.00 728.00 788.00 842.00 Specification Power supply 1/N/PE, 3/N/PE 1/N/PE, 3/N/PE 1/N/PE, 3/N/PE 1/N/PE, 3/N/PEFrequency Hz 50/- 50/- 50/- 50/-Rated current A 1,7 2,6 3,5 4,3Rated connected load kW 1.20 1.80 2.40 3.00Fuse protection A 10 10 10 10Heating output W 480 730 970 1170Operating noise dB(A) 29 28,5 31 32Heat retention capacity % 39 44 46 48Height mm 546 546 546 546Width mm 580 741 902 1063Depth mm 218 218 218 218Weight kg 24 30 37 43Weight (incl. bricks) kg 74 106 138 169Number of brick packs 6 9 12 15Colour alpine white alpine white alpine white alpine white

next page >Product information 2024 - Subject to technical modifications.Storage heaterSlimline storage heater219 SHS 1200 SHS 1800 SHS 2400 (HHR) SHS 3000 (HHR)Recommended accessories Part number 238723 Type Zhzg. 0,35kW Description Auxiliary heater for storage heater Price excl. VAT £ 68.00 Part number 238724 Type Zhzg. 0,5kW Description Auxiliary heater for storage heater Price excl. VAT £ 68.00 Part number 238725 Type Zhzg. 0,8kW Description Auxiliary heater for storage heater Price excl. VAT £ 75.00 Part number 238726Type Zhzg. 1kWDescription Auxiliary heater for storage heaterPrice excl. VAT £ 75.00 SHS 3600 SHS 4200 SHS 4800Part number 200185 200186 200187Price excl. VAT £ 895.00 967.00 1,022.00 Specification Power supply 1/N/PE, 3/N/PE 1/N/PE, 3/N/PE 1/N/PE, 3/N/PEFrequency Hz 50/- 50/- 50/-Rated current A 5,2 6,1 7,0Rated connected load kW 3.60 4.20 4.80Fuse protection A 10 10 16Heating output W 1360 1590 1800Operating noise dB(A) 32 32 32Heat retention capacity % 49 51 51Height mm 546 546 546Width mm 1224 1385 1546Depth mm 218 218 218Weight kg 50 57 63Weight (incl. bricks) kg 201 233 265Number of brick packs 18 21 24Colour alpine white alpine white alpine white Recommended accessories Part number 182101 182101Type ZWSK ZWSKDescription Support bracket for slimline storage heater.Support bracket for slimline storage heater.Price excl. VAT £ 33.00 33.00Part number 238727 Type Zhzg. 1,2kW Description Auxiliary heater for storage heater Price excl. VAT £ 79.00 Part number 238728 Type Zhzg. 1,5kW Description Auxiliary heater for storage heater Price excl. VAT £ 83.00 10

Product information 2024 - Subject to technical modifications.Storage heaterSlimline storage heater220 SHS 3600 SHS 4200 SHS 4800Part number 238915Type Zhzg. 1,7kWDescription Auxiliary heater for storage heaterPrice excl. VAT £ 89.00Core bricks included in the standard delivery.Overall depth = 21mm with wall clearance mesh  (Product: 200181)

Storage heater Accessories for storage heatersProduct information 2024 - Subject to technical modifications.Storage heaterAccessories for storage heaters221Accessories Accessories22210

Accessories for storage heaters AccessoriesProduct information 2024 - Subject to technical modifications.Accessories for storage heatersAccessories222Zhzg.Benefits › Installation-ready complete setDescription • The auxiliary heater serves as a comfort heater outside the heating season if the storage heater is not charged or is insufficiently charged. • The electric auxiliary heater runs on the normal household tariff and only switches on if the storage heater cannot deliver the required temperatures.Zhzg. 0,35kW Zhzg. 0,35kW Zhzg. 0,5kW Zhzg. 0,8kW Zhzg. 1kWPart number 238723 238724 238725 238726Price excl. VAT £ 68.00 68.00 75.00 75.00 Specification Connected load kW 0.35 0.5 0.8 1 Zhzg. 1,2kW Zhzg. 1,5kW Zhzg. 1,7kWPart number 238727 238728 238915Price excl. VAT £ 79.00 83.00 89.00 Specification Connected load kW 1.2 1.5 1,7 Kit complete with safety temperature controller and fixing materials for retrofitting in the storage heater.Suitable for slimline storage heater 1.2kW/standard storage heater 2kW Suitable for slimline storage heater 1.8kW/standard storage heater 3kW Suitable for slimline storage heater 2.4kW/standard storage heater 4kW Suitable for slimline storage heater 3kW/standard storage heater 5kW/low-level storage heater 3.5kW Suitable for slimline storage heater 3.6kW/standard storage heater 6kW Suitable for slimline storage heater 4.2kW/standard storage heater 7kW/low-level storage heater 5kW Suitable for slimline storage heater 4.8kW (Product: 238915)ZWVKBenefits › Vario mounting brackets for storage heater › Two-piece set › Positioning the storage heater with ground clearance of 100mmDescription • The set for off-floor appliance installation has an adjustable tilt.ZWVK 1 ZWVK 1 ZWVK 2Part number 182028 182102Price excl. VAT £ 108.00 108.00 Mounting brackets for standard and low-level storage heater Mounting brackets for slimline storage heater (Product: 182102)

Product information 2024 - Subject to technical modifications.Accessories for storage heatersAccessories223ZWSKBenefits › Support bracket for slimline storage heater › Two-piece setDescription • The set is used to install slimline storage heaters off-floor if the walls are not load bearing.ZWSK ZWSKPart number 182101Price excl. VAT £ 33.00 BS EADescrition • The extension kit for single-phase connection with 230 V is installed in the thermal store.BSW 230 BSW 230Part number 200166Price excl. VAT £ 13.00 2 copper jumpers 10

Product information 2024 - Subject to technical modifications.224

Room heating Direct heatingProduct information 2024 - Subject to technical modifications.Room heatingDirect heating225Convectors 230Duo convectors 240Accessories for convectors 242Rapid heater 24611

Convectors Application areasProduct information 2024 - Subject to technical modifications.ConvectorsApplication areas226 Heating output W 500 1000 1500 2000 3000 CON 5 Premium U CON 10 Premium U CON 15 Premium U CON 20 Premium U CON 30 Premium U W 500 750 1000 1500 2000 2500 3000 CNS 50 Connect UK CNS 75 Connect UK CNS 100 Connect UK CNS 150 Connect UK CNS 200 Connect UK CNS 250 Connect UK CNS 300 Connect UK W 500 750 1000 1500 2000 2500 3000 CNS-U 500 Plus LCD (UK) CNS-U 750 Plus LCD (UK) CNS-U 1000 Plus LCD (UK) CNS-U 1500 Plus LCD (UK) CNS-U 2000 Plus LCD (UK) CNS-U 2500 Plus LCD (UK) CNS-U 3000 Plus LCD (UK) W 500 750 1000 1500 2000 2500 3000 CNS 50 Trend UK CNS 75 Trend UK CNS 100 Trend UK CNS 150 Trend UK CNS 200 Trend UK CNS 250 Trend UK CNS 300 Trend UK

Product information 2024 - Subject to technical modifications.ConvectorsApplication areas227 W 500 750 1000 1500 2000 CNS 50 Trend NC CNS 75 Trend NC CNS 100 Trend NC CNS 150 Trend NC CNS 200 Trend NC 11

Product information 2024 - Subject to technical modifications.228

Direct heating ConvectorsProduct information 2024 - Subject to technical modifications.Direct heatingConvectors229Wall installation CON Premium U230CNS Connect UK231CNS-U Plus LCD233CNS Trend U235CNS Trend NC23711

Convectors Wall installationProduct information 2024 - Subject to technical modifications.ConvectorsWall installation230CON Premium UBenefits › Elegant design with aluminium front › Electronic controller with illuminated LCD screen › Weekly timer with 3 time programs, self-learning function and open window detection › With short-time timer › Safety through overheating protection › Omnipolar operating selector › Long lasting stainless steel tubular heater with steel fins › Permanent connection with FIL-pilot control cable › During a power failure, the clock is buffered for up to 10 hoursApplication • This high quality convector is suitable as a standalone heater, as an efficient interim heater in spring/autumn, or for additional heat demand. • Thanks to its very compact design, the wall mounted appliance takes up very little space. • The appliance can be integrated into systems with central FIL-pilot control. • The convector has won the Red Dot Design Award and suits any setting.Convenience features • The premium convector with electronic closed-loop control is equipped with a large, easy-to-read display. • The required room temperature can be easily set to the exact degree at the top-mounted programming unit. • In addition to the programmable weekly timer, there are two preset and one individually programmable time programs available. • In addition to the comfort temperature, it is also possible to program the setback temperature. In timer mode, the comfort temperature is achieved at precisely the right time thanks to the adaptive control with learning function. • Stainless steel tubular heaters with steel fins contribute to its long service life. The appliance has an integral frost protection setting. • A design highlight is the aluminium front.Efficiency • Users can activate a function on the appliance which detects open windows, thereby avoiding unneces-sary energy loss.Installation • Straightforward, stable wall mounting needs one person only because the wall mounting bracket is fitted to the wall separately from the appliance and can be readjusted later. All that then remains is to hook the mainte-nance-free appliance into place. • The power cable with FIL-pilot control core is prewired for permanent connection.Safety • Integral childproofing as the programming unit can be locked. • Integral high limit safety cut-out.CON 5 Premium U CON 5 Premium U CON 10 Premium U CON 15 Premium U CON 20 Premium U CON 30 Premium U DISCONT.PRODUCTDISCONT.PRODUCTDISCONT.PRODUCTDISCONT.PRODUCTDISCONT.PRODUCTPart number 201278 200268 200269 200270 200276Price excl. VAT £ 253.00 261.00 267.00 274.00 368.00 Specification Power supply 1/N/PE ~ 230 V 1/N/PE ~ 230 V 1/N/PE ~ 230 V 1/N/PE ~ 230 V 1/N/PE ~ 230 VRated voltage V 230 230 230 230 230Rated current A 2,2 4,3 6,5 8,7 13,0Connected load W 500 1000 1500 2000 3000Connected load kW 0,5 1,0 1,5 2 3Setting range °C 5-30 5-30 5-30 5-30 5-30IP rating IP 24 IP 24 IP 24 IP 24 IP 24Protection class I I I I IHeight mm 470 470 470 470 470Width mm 345 470 625 780 1090Depth mm 126 126 126 126 126Weight kg 4.30 5.90 7.50 9.30 12.60Colour alpine white alpine white alpine white alpine white alpine white Depth including wall mounting bracket

next page >Product information 2024 - Subject to technical modifications.ConvectorsWall installation231CNS Connect UKBenefits › Wall mounted and networkable convector as a standalone heater or for central heating backup › Control at home and on the move via the EASYTRON base station and the free, intuitive app › Conveniently set time programs for efficient and economical operation via app › Combine and control several convectors from specific rooms as a group › Activate predefined scenarios quickly and easily with just one tap (comfort, setback or standby mode) › Statistics on energy consumption and energy costs for full transparency › Simple and guided process for setup and commissioning › Integration of external room temperature sensors optionally possible, allowing even greater comfort in larger rooms › Electronic controller with illuminated LCD screen › Safety through overheating protection › Long lasting stainless steel tubular heater with aluminium coated steel finsApplication • This wall mounted, networkable convector is used as a standalone electric heater, an efficient interim heater in spring/autumn, or simply for additional heat demand in the living space, sanitary facilities or utility rooms. • The timeless and slimline design suits any setting. • The intuitive and convenient app-based operation ensures a high degree of heating comfort along with energy saving operation. Both individual appliances or a group of several convectors can be controlled. Communication takes place wirelessly via the EASYTRON base station.Convenience features• The electronically controlled convector can be controlled via the integral programming unit or via the free app. Access via the app is possible both at home and when away. This requires the optional EASYTRON base station which enables up to 50 convectors to be controlled. • Both individual appliances and a group of several convectors (for example in a room) can be conveniently and intuitively operated. The app enables access to additional operating modes and provides transparency about consumption and costs by means of user friendly statistics. Time programs can be conveniently set and ensure energy and cost efficient operation. Predefined scenarios for comfort, setback and standby modes are available at your fingertips for quick activation. • For even greater comfort in larger spaces, external room temperature sensors can be integrated as an option. • The convector heats up the indoor air evenly and silently. • Further benefits include the backlit display, the time programs and window-open detection to prevent energy wastage. • The appliance has a frost protection setting and an omnipolar operating selector. The high grade stainless steel tubular heater with aluminium coated steel fins is integrated in a robust metal casing.Installation • Quick and secure wall mounting can be carried out by just one person, as the wall mounting bracket is installed separately and can be readjusted later. All that remains is to hook the appliance into place. • A guided process is provided for quick and convenient networking and setting up of the app-based control.Safety• Integral high limit safety cut-out. • The childproofing feature provides protection against unintentional mod-ifications.CNS 50 Connect UK CNS 50 Connect UK CNS 75 Connect UK CNS 100 Connect UK CNS 150 Connect UK NEW NEW NEW NEWPart number 205639 205640 205641 205642Price excl. VAT £ 218.00 225.00 232.00 262.00 Specification Power supply 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 VRated voltage V 240 240 240 240Rated current A 2,1 3,1 4,2 6,3Connected load W 500 750 1000 1500Connected load kW 0,5 0,75 1 1,5Setting range °C 5-30 5-30 5-30 5-30IP rating IP 24 IP 24 IP 24 IP 24Protection class I I I IHeight mm 450 450 450 450Width mm 348 426 426 582Depth mm 100 100 100 100Weight kg 4.00 4.60 4.60 6.00Colour alpine white alpine white alpine white alpine white 11

Product information 2024 - Subject to technical modifications.ConvectorsWall installation232 CNS 50 Connect UK CNS 75 Connect UK CNS 100 Connect UK CNS 150 Connect UKRequired accessories Part number 237737 237737 237737 237737Type EZE EZE EZE EZEDescription EASYTRON Connect base stationEASYTRON Connect base stationEASYTRON Connect base stationEASYTRON Connect base stationPrice excl. VAT £ 220.00 220.00 220.00 220.00 Recommended accessories Part number 237738 237738 237738 237738Type ERT ERT ERT ERTDescription EASYTRON Connect room temperature sensorEASYTRON Connect room temperature sensorEASYTRON Connect room temperature sensorEASYTRON Connect room temperature sensorPrice excl. VAT £ 63.00 63.00 63.00 63.00 CNS 200 Connect UK CNS 250 Connect UK CNS 300 Connect UK NEW NEW NEWPart number 205643 205644 205645Price excl. VAT £ 269.00 308.00 318.00 Specification Design 0-2000W Power supply 1/N/PE ~240 V 1/N/PE ~ 240 V 1/N/PE ~240 VRated voltage V 240 240 240Rated current A 8,3 10,4 12,5Connected load W 2000 2500 3000Connected load kW 2 2,6 3Setting range °C 5-30 5-30 5-30IP rating IP 24 IP 24 IP 24Protection class I I IHeight mm 450 450 450Width mm 738 894 1050Depth mm 100 100 100Weight kg 7.70 9.20 10.90Colour alpine white alpine white alpine white Required accessories Part number 237737 237737 237737Type EZE EZE EZEDescription EASYTRON Connect base stationEASYTRON Connect base stationEASYTRON Connect base stationPrice excl. VAT £ 220.00 220.00 220.00 Recommended accessories Part number 237738 237738 237738Type ERT ERT ERTDescription EASYTRON Connect room temperature sensorEASYTRON Connect room temperature sensorEASYTRON Connect room temperature sensorPrice excl. VAT £ 63.00 63.00 63.00 Depth including wall mounting bracket

next page >Product information 2024 - Subject to technical modifications.ConvectorsWall installation233CNS-U Plus LCDBenefits › Weekly timer with 3 time programs, self-learning function and open window detection › During a power failure, the clock is buffered for up to 10 hours › Permanent connection with FIL-pilot control cable › Electronic controller with illuminated LCD screen › Long lasting stainless steel tubular heater with steel fins › Safety through overheating protection › Compact metal casing in a slimline design › Omnipolar operating selector › Wall mounted convector heaters with high heating output › In timer mode, the self-learning control unit calculates the preheating time automaticallyApplication • This compact wall mounted convector is suitable as a standalone heater, as an efficient interim heater in spring/autumn and for additional heat demand in the living space, bathroom or utility rooms. • The appliance can be integrated into systems with central FIL-pilot control. • The timeless and very slimline design suits any setting.Convenience features • The indoor air is heated evenly and silently by the electronically controlled convector with easy-to-read display and simple programming. • The required room temperature is easy to set at the programming unit. • The convector can be adjusted to suit individual needs. For this, a programmable weekly timer is integrated with two preset time programs and one customisable time program. • In timer mode, the comfort temperature is achieved at precisely the right time thanks to adaptive control with learning function. • Comfort temperature and setback temperature are programmable. • The user can activate an application that detects open windows. • The ap-pliance has a frost protection setting. • The convector has an omnipolar operating selector. • The high grade stainless steel tubular heater with aluminium coated steel fins is integrated in a robust metal casing.Installation • Straightforward, stable wall mounting needs one person only: the wall mounting bracket is fitted to the wall separately from the appliance and can be readjusted later. All that then remains is to hook the appliance into place. • The maintenance-free convector has a power cable (permanent connection) with FIL-pilot control core. • Safety • The programming unit is equipped with an adjustable childproofing facility to prevent unintentional or unauthorised adjustments. • Integral high limit safety cut-out.CNS-U 500 Plus LCD (UK) CNS-U 500 Plus LCD (UK) CNS-U 750 Plus LCD (UK) CNS-U 1000 Plus LCD (UK) CNS-U 1500 Plus LCD (UK) NEW NEW NEW NEWPart number 205867 205868 205869 205870Price excl. VAT £ 162.00 166.00 172.00 193.00 Specification Power supply 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 VRated voltage V 240 240 240 240Rated current A 2,1 3,1 4,2 6,3Connected load W 500 750 1000 1500Connected load kW 0,5 0,75 1,0 1,5Setting range °C 5-30 5-30 5-30 5-30IP rating IP 24 IP 24 IP 24 IP 24Protection class I I I IHeight mm 450 450 450 450Width mm 348 426 426 582Depth mm 100 100 100 100Weight kg 4.00 4.60 4.60 6.00Colour signal white, RAL 9003 signal white, RAL 9003 signal white, RAL 9003 signal white, RAL 9003 CNS-U 2000 Plus LCD (UK) CNS-U 2500 Plus LCD (UK) CNS-U 3000 Plus LCD (UK) NEW NEW NEWPart number 205871 205872 205873Price excl. VAT £ 200.00 227.00 235.0011

Product information 2024 - Subject to technical modifications.ConvectorsWall installation234 CNS-U 2000 Plus LCD (UK) CNS-U 2500 Plus LCD (UK) CNS-U 3000 Plus LCD (UK) Specification Power supply 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 VRated voltage V 240 240 240Rated current A 8,3 10,4 12,5Connected load W 2000 2500 3000Connected load kW 2,0 2,5 3Setting range °C 5-30 5-30 5-30IP rating IP 24 IP 24 IP 24Protection class I I IHeight mm 450 450 450Width mm 738 894 1050Depth mm 100 100 100Weight kg 7.70 9.20 10.90Colour signal white, RAL 9003 signal white, RAL 9003 signal white, RAL 9003 Depth including wall mounting bracket

next page >Product information 2024 - Subject to technical modifications.ConvectorsWall installation235CNS Trend UBenefits › Wall mounted convector heaters with high heating output › Compact metal casing in a slimline design › Permanent connection with FIL-pilot control cable › Electronic controller with illuminated LCD screen › Weekly timer with 3 time programs, self-learning function and open window detection › In timer mode, the self-learning control unit calculates the preheating time automatically › Safety through overheating protection › Omnipolar operating selector › Long lasting stainless steel tubular heater with steel fins › During a power failure, the clock is buffered for up to 10 hoursApplication • This compact wall mounted convector is suitable as a standalone heater, as an efficient interim heater in spring/autumn and for additional heat demand in the living space, bathroom or utility rooms. • The appliance can be integrated into systems with central FIL-pilot control. • The timeless and very slimline design suits any setting.Convenience features • The indoor air is heated evenly and silently by the electronically controlled convector with easy-to-read display and simple programming. • The required room temperature is easy to set at the programming unit. • The convector can be adjusted to suit individual needs. For this, a programmable weekly timer is integrated with two preset time programs and one customisable time program. • In timer mode, the comfort temperature is achieved at precisely the right time thanks to adaptive control with learning function. • Comfort temperature and setback temperature are programmable. • The user can activate an application that detects open windows. • The ap-pliance has a frost protection setting. • The convector has an omnipolar operating selector. • The high grade stainless steel tubular heater with aluminium coated steel fins is integrated in a robust metal casing.Installation • Straightforward, stable wall mounting needs one person only: the wall mounting bracket is fitted to the wall separately from the appliance and can be readjusted later. All that then remains is to hook the appliance into place. • The maintenance-free convector has a power cable (permanent connection) with FIL-pilot control core. • Safety • The programming unit is equipped with an adjustable childproofing facility to prevent unintentional or unauthorised adjustments. • Integral high limit safety cut-out.CNS 50 Trend UK CNS 50 Trend UK CNS 75 Trend UK CNS 100 Trend UK CNS 150 Trend UK DISCONT.PRODUCTDISCONT.PRODUCTDISCONT.PRODUCTDISCONT.PRODUCTPart number 236559 236560 236561 236562Price excl. VAT £ 162.00 166.00 173.00 193.00 Specification Power supply 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 VRated voltage V 240 240 240 240Rated current A 2,1 3,1 4,2 6,3Connected load W 500 750 1000 1500Connected load kW 0,5 0,75 1,0 1,5Setting range °C 5-30 5-30 5-30 5-30IP rating IP 24 IP 24 IP 24 IP 24Protection class I I I IHeight mm 450 450 450 450Width mm 348 426 426 582Depth mm 100 100 100 100Weight kg 4.00 4.60 4.60 6.00Colour alpine white alpine white alpine white alpine white CNS 200 Trend UK CNS 250 Trend UK CNS 300 Trend UK DISCONT.PRODUCTDISCONT.PRODUCTDISCONT.PRODUCTPart number 236563 236564 236565Price excl. VAT £ 200.00 227.00 235.0011

Product information 2024 - Subject to technical modifications.ConvectorsWall installation236 CNS 200 Trend UK CNS 250 Trend UK CNS 300 Trend UK Specification Power supply 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 VRated voltage V 240 240 ~24 0Rated current A 8,3 10,4 12,5Connected load W 2000 2500 3000Connected load kW 2,0 2,5 3,0Setting range °C 5-30 5-30 5-30IP rating IP 24 IP 24 IP 24Protection class I I IHeight mm 450 450 450Width mm 738 894 1050Depth mm 100 100 100Weight kg 7.70 9.20 10.90Colour alpine white alpine white alpine white Depth including wall mounting bracket

Product information 2024 - Subject to technical modifications.ConvectorsWall installation237CNS Trend NCBenefits › Wall mounted convector with electronic open-loop control and illuminated LCD screen › Integral room control, specifically for guest rooms in hotels, B&Bs and student accommodation › Long lasting stainless steel tubular heater with steel fins › Safety through overheating protection › In timer mode, the self-learning control unit calculates the preheating time automatically › During a power failure, the clock is buffered for up to 10 hours › Weekly timer with 3 time programs, self-learning function and open window detection › Service tool for programmed operation requiredApplication • This compact wall mounted convector is suitable as a standalone heater for living spaces. • The ap-pliance has been developed for guest rooms in hotels and B&Bs or for student accommodation. The wall mounted convector can be configured to always work in the most cost effective way for the user. A service tool (to be ordered separately) is required to program the appliance.Convenience features • The convector with electronic open-loop control, illuminated display and easy programming ensures even distribution of heat in the room. • The appliance can be operated individually. A weekly time switch with two preset and one individual time program and an adaptive self-learning function is integrated. • The integral special room control mode combines efficiency and convenience. In this operating mode, the set values for comfort setback and frost protection, as well as the respective time spans, are permanently programmed in the unit. When the programmed time for the comfort temperature has elapsed, the appliance switches automatically to setback mode. • If the room is not being used for an extended length of time, the appliance can switch automatically to frost protection mode. • Users can change the specified temperature easily by using the two control buttons. The operating parameters can only be set up, activated or changed using the separate service tool for the CNS Trend NC. • Integral overheating protection.Efficiency • If required, the convector can detect open windows. It then switches automatically to frost protection mode, thereby saving energy. • The appliance is equipped with a high quality stainless steel tubular heater with aluminium coated fins.CNS 50 Trend NC CNS 50 Trend NC CNS 75 Trend NC CNS 100 Trend NC CNS 150 Trend NC CNS 200 Trend NCPart number 202001 202002 202003 202004 202005Price excl. VAT £ 162.00 166.00 173.00 193.00 200.00 Specification Power supply 1/N/PE ~ 240 V 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 V 1/N/PE ~240 VRated voltage V 240 240 240 240 240Rated current A 2,1 3,1 4,2 6,3 8,3Connected load W 500 750 1000 1500 2000Connected load kW 0,5 0,75 1 1,5 2Setting range °C 5-30 5-30 5-30 5-30 5-30IP rating IP 24 IP 24 IP 24 IP 24 IP 24Protection class I I I I IHeight mm 450 450 450 450 450Width mm 348 426 426 582 738Depth mm 100 100 100 100 100Weight kg 4.00 4.60 4.60 6.00 7.70Colour alpine white alpine white alpine white alpine white alpine white Required accessories Part number 203981 203981 203981 203981 203981Type Service tool CNS Service tool CNS Service tool CNS Service tool CNS Service tool CNSDescription Service tool for the CNS Trend NC series for configuring Room Control modeService tool for the CNS Trend NC series for configuring Room Control modeService tool for the CNS Trend NC series for configuring Room Control modeService tool for the CNS Trend NC series for configuring Room Control modeService tool for the CNS Trend NC series for configuring Room Control modePrice excl. VAT £ 773.00 773.00 773.00 773.00 773.00 Depth including wall mounting bracket11

Duo convectors Application areasProduct information 2024 - Subject to technical modifications.Duo convectorsApplication areas238 Heating output W 750 1000 1500 2000 CND 75 CND 100 CND 150 CND 200

Direct heating Duo convectorsProduct information 2024 - Subject to technical modifications.Direct heatingDuo convectors239Wall installation CND24011

Duo convectors Wall installationProduct information 2024 - Subject to technical modifications.Duo convectorsWall installation240CNDBenefits › Modern and high grade design › Two heating systems for radiant and convection heating in a single appliance › Electronic controller with illuminated LCD screen › Intelligent energy saving functions › Integral RT controller with weekly timer and open window detection › Automatic setback of the set temperature when windows are open or rooms are not used › Consumption indicator › Permanent connection with FIL-pilot control cableApplication • This high quality duo convector can be used as a standalone heater, as an efficient interim heater in spring/autumn, or for additional heat demand in the living space, bathroom or utility rooms. • The appliance is wall mounted. • Two integral heaters for radiant heat and convection work together to ensure a pleasant room tempera-ture. • The elegant and minimalist design suits any modern setting. • The convector can be integrated into systems with central FIL-pilot control.Convenience features • In addition to the two heating systems for radiant heat and convection, the design convector also features precise electronic closed-loop control with intelligent energy saving functions. • The appliance switches automatically to frost protection mode when a window is open. • The motion sensor detects if there is no longer anyone in the room. The set room temperature is then automatically lowered. • The weekly timer offers three preset time programs which can be individually adapted. • Very user friendly operation is ensured thanks to the top mounted user interface and easy-to-read display. The programming unit has an adjustable childproofing facility to prevent unintentional or unauthorised adjustments.Installation • The power cable has a FIL-pilot control core and is prewired for permanent connection. • Only one person is required for the installation as the wall mounting bracket is fitted to the wall separately from the appliance and can be readjusted later. The appliance simply needs to be hooked into place. • The maintenance-free convector has an omnipolar operating selector.Safety • The appliance has an integral high limit safety cut-out.CND 75 CND 75 CND 100 CND 150 CND 200Part number 234813 234814 234815 234816Price excl. VAT £ 334.00 393.00 454.00 501.00 Specification Power supply 1/N ~ 230 V 1/N ~ 230 V 1/N ~ 230 V 1/N ~ 230 VRated voltage V 230 230 230 230Rated current A 3,3 4,3 6,5 8,7Connected load W 750 1000 1500 2000Connected load kW 0,75 1 1,5 2Setting range °C 10 - 30 10 - 30 10 - 30 10 - 30IP rating IP 24 IP 24 IP 24 IP 24Protection class II II II IIHeight mm 504 504 504 504Width mm 675 790 1010 1240Depth mm 120 120 120 120Weight kg 6.70 7.70 9.70 11.50Colour white white white white Depth including wall mounting bracket

Direct heating Accessories for convectorsProduct information 2024 - Subject to technical modifications.Direct heatingAccessories for convectors241Accessories Accessories24211

Accessories for convectors AccessoriesProduct information 2024 - Subject to technical modifications.Accessories for convectorsAccessories242Servicetool CNSBenefits › Service tool for programming the integral room control system of a wall mounted convector according to requirements › Can be individually matched to the needs of hotels, student accommodation and other accommodation facilities › Temperatures can be specified for boost, setback mode and frost protection › 2 programmable timers for comfort and setback modes › Simple and intuitive operation › Programming transferred via data cable › Battery runtime display › Charging via micro-USBDescription • STIEBEL ELTRON wall mounted convectors can be programmed with the battery-operated service tool. Compatible appliances can be recognised at the interface on the appliance programming unit. • The service tool transmits the required configuration via a data cable to the room control system for the convectors.Convenience features • The service tool enables the set temperatures for the boost, setback and frost modes of the wall mounted convectors to be individually programmed as required. Two timers are integrated for this purpose: the boost timer defines the period of time during which the appliance heats to the comfort temperature. After this, setback mode is activated automatically. The eco timer specifies for how long the appliance is heated to setback temperature. After this, frost protection is activated automatically.Use • The service tool can be easily and intuitively operated. • The battery-operated device has a touchscreen which can be operated either with the supplied stylus or your fingers. Entries are made intuitively using menus and on-screen keyboards. • The required configuration is simply transmitted to the convector via the supplied data cable, for example by the caretaker in student accommodation. • The battery charge status is shown on the display. There is an integral micro USB socket for charging it.Service tool CNS Service tool CNSPart number 203981Price excl. VAT £ 773.00 Specification IP rating otherLength m 0,19Length mm 190Height mm 60Width mm 80Depth mm 60Weight kg 1.25Casing material PlasticAPPLICATION: For configuring the CNS Trend NC for using room control mode.  (Product: 203981) Service tool for CNS Trend NC (Product: 203981)

Product information 2024 - Subject to technical modifications.24311

Rapid heater Application areasProduct information 2024 - Subject to technical modifications.Rapid heaterApplication areas244 Heating output W 2000 CK 20 Premium W 2000 CK 20 trend LCD

Direct heating Rapid heaterProduct information 2024 - Subject to technical modifications.Direct heatingRapid heater245Rapid heater CK Premium246CK Trend LCD24711

Rapid heater Rapid heaterProduct information 2024 - Subject to technical modifications.Rapid heaterRapid heater246CK PremiumBenefits › Elegant design with aluminium front › Electronic controller with illuminated LCD screen › Silent mode with a quiet heating stage and powerful rapid heat-up stage › Weekly timer with 3 time programs, self-learning function and open window detection › With short-time timer › Safety through overheating protection › Omnipolar operating selectorApplication • This high quality rapid heater is suitable as a standalone heater or as a booster heater, particularly for rooms that are not heated constantly. • The wall mounted appliance heats the indoor air quickly and evenly. • The design has won the Red Dot Design Award; the appliance suits any setting.Convenience features • The premium rapid heater with electronic closed-loop control is equipped with a large, easy-to-read display. The required room temperature can be easily adjusted at the top-mounted programming unit. • In addition to the programmable weekly timer, there are two preset and one individually programmable time programs available. • In addition to the comfort temperature, the setback temperature can also be programmed. In timer mode, the comfort temperature is achieved at precisely the right time thanks to the adaptive control with learning function. • Quiet operation in Silent Mode which features a switchable heating stage and reduced fan speed. • The elegant appliance is equipped with an aluminium front and has an integral frost protection setting.Efficiency • To prevent unnecessary energy losses, users can activate a function that detects open windows.Installation • Straightforward, stable wall mounting by just one person because the wall mounting bracket is fitted separately from the appliance and can be adjusted afterwards. All that then remains is to hook the maintenance-free appliance into place.Safety • Integral childproofing as the programming unit can be locked. • The rapid heater has an integral safety temperature limiter.CK 20 Premium CK 20 PremiumPart number 237835Price excl. VAT £ 221.00 Specification Power supply 1/N/PE ~ 230 VRated voltage V 230Rated current A 8,7Connected load W 2000Connected load kW 2Sound pressure level dB(A) 37/48Setting range °C 5-30IP rating IP 24Protection class IHeight mm 470Width mm 345Depth mm 126Weight kg 5.30Colour alpine white Depth including wall mounting bracket

Product information 2024 - Subject to technical modifications.Rapid heaterRapid heater247CK Trend LCDBenefits › Compact appliance in a plastic casing › Electronic controller with illuminated LCD screen › Weekly timer with 3 time programs, self-learning function and open window detection › During a power failure, the clock is buffered for up to 10 hours › Very high safety thanks to 3-stage overheating protection › Fluff filter in the air intake › Cable storage at the back for the connecting cable › Very quiet operationApplication • This rapid heater is suitable as a standalone heater in the bathroom. The appliance can also be used as an efficient interim heater in spring/autumn and as a booster heater, for example in a guest room or recreational room. • Thanks to its compact design, the rapid heater does not take up much space. • The appliance is designed for wall mounting and heats the indoor air quickly and evenly.Convenience features • The rapid heater with electronic closed-loop control is equipped with a large, easy-to-read display. • The required room temperature can be easily adjusted at the top-mounted programming unit. • In addition to the programmable weekly timer, there are two preset and one individually programmable time programs available. • In addition to the comfort temperature, the setback temperature is also programmable. The comfort temperature is reached at exactly the right time in timer mode. Adaptive control with a learning function is integrated for this purpose. • If required, users are able to activate a function which detects when windows are open; this avoids un-necessary energy loss. • The rapid heater has an integral fluff filter. • The casing is made from hard-wearing plastic.Efficiency • The high quality self-limiting ceramic heating element keeps the temperature constant to save energy.Installation • Stable wall mounting is possible with one person only: the wall mounting bracket is fitted to the wall separately from the appliance and can be readjusted later. The appliance is then simply hooked into place. • The power cable is fitted with a right angle plug as standard. Any excess cable can be housed in the cable storage com-partment on the back panel.Safety • Integral childproofing as the programming unit can be locked. • The 3-stage safety concept includes the self-limiting ceramic heating element, the safety temperature limiter and the built-in fuse.CK 20 trend LCD CK 20 trend LCDPart number 236653Price excl. VAT £ 148.00 Specification Power supply 1/N ~ 230 VRated voltage V ~230Rated current A 8,7Connected load W 2000Connected load kW 2Sound pressure level dB(A) 49Setting range °C 5-30IP rating IP 24Protection class IIHeight mm 400Width mm 275Depth mm 131Weight kg 2.50Colour alpine white Depth including wall mounting bracket11

Bathroom radiator Towel railsProduct information 2024 - Subject to technical modifications.Bathroom radiatorTowel rails248BHE PlusBenefits › Wall mounted towel rails › Factory-filled with heat transfer medium for purely electric operation › Can also be connected to the hot water heating network › Electronic controller with illuminated LCD screen › Weekly timer with self-learning function › Boost function for quick heat-up › Pre-installed, electric direct immersion heater › Very safe thanks to high limit safety cut-out › Integral rapid heater (Product: 238715)Application • This well-finished bathroom radiator can be used either as a purely electrical appliance or can be connected to the hot water central heating system. In both operating modes, the radiator is optimally suited to warming and drying towels, as an interim heater in spring/autumn or as a booster heater. Towels can easily be hung at multiple levels.Convenience features • The appliances are simple and convenient to operate via an easily accessible electronic controller. The required room temperature is easy to set at the programming unit. • The programmable weekly timer with adaptive control as a learning function ensures the comfort temperature can be easily and conveniently achieved at exactly the right time. When there is a higher heat demand, a boost function is available for fast heating at full output. The duration of the boost function can be adjusted. • The setback temperature can be programmed. • A version with an integral rapid heater is available for heating the room quickly. The rapid heater can be activated for the preselected heating time.Installation • The appliance is filled with a heat transfer medium ready for installation. • Ready for connection thanks to mains plug and connecting cable.Safety • Integral high limit safety cut-out.BHE 50 Plus BHE 50 Plus BHE 75 Plus BHE 100 Plus BHE 175 T PlusPart number 239141 238713 238714 238715Price excl. VAT £ 382.00 509.00 614.00 663.00 Specification Power supply 1/N ~ 230 V 1/N ~ 230 V 1/N ~ 230 V 1/N ~ 230 VRated voltage V 230 230 230 230Rated current A 2.2 3.3 4.4 7.6Rated output W 500 750 1000 1750Connected load W 500 750 1000 1750Heating output to EN 442 (75/65 – 20 °C)W 367 571 876 571Heating output F/R – T (70/55 – 24 °C)W 125 194 298 194Setting range °C 10-28 10-28 10-28 10-28IP rating IP 24 IP 24 IP 24 IP 24Protection class II II II IINumber of ribs 20 30 37 30Height mm 1090 1590 1830 1590Width mm 500 500 550 500Depth mm 117 117 117 130Weight kg 12.00 19.00 23.00 20.00Colour traffic white, RAL 9016 traffic white, RAL 9016 traffic white, RAL 9016 traffic white, RAL 9016 Depth including wall mounting bracket

Infrared wall mounted radiant heater IndoorProduct information 2024 - Subject to technical modifications.Infrared wall mounted radiant heaterIndoor249IWBenefits › Full metal casing › Pull-cord activation › Display shows the switching position in the indicator windowApplication • This radiant heater is suitable for heating small rooms. The appliance gives off noticeable warmth immediately without any air movement. It is particularly suitable for bathrooms, recreational rooms or wind-shel-tered, covered verandas.Convenience features • The pivoting highly polished reflector is equipped with quartz heater rods. It is operated by a pull cord.Installation • Easy wall mounting with direct electrical connection.IW 120 IW 120Part number 229339Price excl. VAT £ 64.00 Specification Power supply 1/N/PE ~ 230 VRated voltage V 230Rated current A 5.2Rated output kW 1.2Connected load W 1200Number of heating stages 3IP rating IPX4Protection class I to EN 60335Height mm 145Width mm 535Depth mm 85Weight kg 1.55Colour silverInstallation type Indoor/outdoor installation 11

Product information 2024 - Subject to technical modifications.250

Hand dryer Hand dryerProduct information 2024 - Subject to technical modifications.Hand dryerHand dryer251Hand dryer, high speed25412

Product information 2024 - Subject to technical modifications.252

Hand dryer Hand dryer, high speedProduct information 2024 - Subject to technical modifications.Hand dryerHand dryer, high speed253High speed ULTRONIC Premium254ULTRONIC Plus25512

Hand dryer, high speed High speedProduct information 2024 - Subject to technical modifications.Hand dryer, high speedHigh speed254ULTRONIC PremiumBenefits › Extremely short hand drying time of less than 12 seconds › Robust, impact-resistant casing made of brushed stainless steel › Integral indoor air purifier with UV-C lamp and ion generator › With HEPA filter for hygienic hand drying with clean air › Add-on heating element for pleasant hand drying › Silent mode with reduced fan speed › Hygienic and energy efficient through IR proximity sensors › Maintenance-free thanks to brushless motor › Very long service life › Energy efficient and environmentally responsible › Brushed stainless steel casing (Product: 205633)Application • This high quality, electric high speed hand dryer is distinguished by its particularly short drying time. The appliance dries hands by removing the moisture with a concentrated jet of air. • The hand dryer is ideally suited to the special demands made on washroom facilities in restaurants, commerce and public buildings.Convenience features • Operation is contactless due to the integral infrared proximity sensors. • Additional hygiene is provided by the HEPA filter and the air purification function by UV-C light and ion generator. The appliance reliably removes dust, pollen, bacteria and viruses from the indoor air. The air purification function works cyclically, run-ning for 1 h and being off for 1 h. • A switchable heating element increases comfort when drying hands. • Optimally suited to sanitary facilities in schools and offices thanks to silent mode. The particularly low connected load enables energy efficient and environmentally responsible operation. • The robust and impact-resistant casing is made from brushed stainless steel.Installation • Easy installation due to separate mounting plate. • The power supply is connected directly in the ap-pliance or optionally via a connecting cable with plug.ULTRONIC Premium ULTRONIC PremiumPart number 205633Price excl. VAT £ 356.00 Specification Power supply 1/N/PE ~ 220-240 VRated voltage V 230Frequency Hz 50/60Rated current A 3,1Rated output W 720Operating noise dB(A) 76Air speed m/s 96Air flow rate m³/h 84Drying time s 12IP rating IP X3Protection class IHeight mm 309Width mm 272Depth mm 132Weight kg 4.00Casing material Stainless steelColour Stainless steel

Product information 2024 - Subject to technical modifications.Hand dryer, high speedHigh speed255ULTRONIC PlusBenefits › Extremely short hand drying time of less than 12 seconds › Robust, impact-resistant plastic casing › Integral indoor air purifier with UV-C lamp and ion generator › With HEPA filter for hygienic hand drying with clean air › Add-on heating element for pleasant hand drying › Silent mode with reduced fan speed › Hygienic and energy efficient through IR proximity sensors › Maintenance-free thanks to brushless motor › Very long service life › Energy efficient and environmentally responsible › Casing made of impact-resistant plastic (Product: 205632)Application • This high quality, electric high speed hand dryer is distinguished by its particularly short drying time. The appliance dries hands by removing the moisture with a concentrated jet of air. • The hand dryer is ideally suited to the special demands made on washroom facilities in restaurants, commerce and public buildings.Convenience features • Operation is contactless due to the integral infrared proximity sensors. • Additional hygiene is provided by the HEPA filter and the air purification function by UV-C light and ion generator. The appliance reliably re-moves dust, pollen, bacteria and viruses from the indoor air. The air purification function works cyclically, running for 1 h and being off for 1 h.• A switchable heating element increases your comfort during hand drying. • Optimally suited to sanitary facilities in schools and offices thanks to silent mode. The particularly low connected load enables energy efficient and environmentally responsible operation. • The robust and impact-resistant casing is made from plastic.Installation • Easy installation due to separate mounting plate. • The power supply is connected directly in the ap-pliance or optionally via a connecting cable with plug.ULTRONIC Plus ULTRONIC PlusPart number 205632Price excl. VAT £ 304.00 Specification Power supply 1/N/PE ~ 220-240 VRated voltage V 230Frequency Hz 50/60Rated current A 3,1Rated output W 720Operating noise dB(A) 76Air speed m/s 96Air flow rate m³/h 84Drying time s 12IP rating IP X3Protection class IHeight mm 309Width mm 272Depth mm 132Weight kg 2.80Casing material PlasticColour signal white, RAL 9003 12

Product information 2024 - Subject to technical modifications.256

Issue 10_23