SELF DRILLING SCREWS : simplebooklet.com

HIGH-CORROSION RESISTANT STEELPHILLIPS• Bugle (Drywall)• Flat w/ #4 Drill Point (Machine Screw Thread)• Flat Undercut, Spaced Thread (#3 Point)• Hex Washer, Spaced Thread (Standard Drill Point)• Oval, Spaced Thread (#3 Point)• Pan, Spaced Thread (Standard Drill Point)• Hex Flange w/ Rubber Washer (#1 Stitch Point)• Hex Flange w/ Rubber Washer (#3 Drill Point)SLOTTED (HEX WASHER)• Spaced Thread (#3 Point)• Machine Screw Thread (#3 Drill Point)SPACED THREAD (#1 STITCH POINT)• Spaced Thread (#2, #4 Drill Point)• Spaced Thread (Standard Drill Point)• Spaced Thread w/ Neo-EPDM Washer (Standard Drill Point)• Machine Screw Thread (#2, #4, #5 Drill Point)• Machine Screw Thread (Standard Drill Point)All #2 / #3 points unless otherwise noted.SILVER RUSPERT®A three-layer coating consisting of:(1) A Metallic zinc layer, topped with a(2) chemical conversion film layer, covered by a(3) boxed ceramic surface coating.The finished parts have a dull silver color and will withstand a minimum of 1,000-hour Salt Spray test.ELECTRO-ZINC NICKELAchieves the highest resistance to corrosion with the smallest thickness of protective coating.Typically the nickel content of the alloyfinish is 12-15%. The finished parts willwithstand a minimum 1,000-hour SaltSpray test.

Page 3

STEEL ZINCSQUARE RECESSPHILLIPS RECESS• Bugle (Spaced Thread)• Bugle w/ Pilot Point (Fine Thread)• Flat, Spaced Thread COMBINATION RECESS• Hex Washer (Spaced Thread)• Pan (Spaced Thread)SIX-LOBE RECESSUNSLOTTED (HEX)• Spaced ThreadSLOTTED (HEX WASHER)• #2 & #3 Points• Serrated Spaced Thread UNSLOTTED (HEX WASHER)• Spaced Thread (#2, #3, #4, #5 Points)• Spaced Thread, High Head (#3 Point) •Spaced Thread, Undersized Head •• Modified TrussFlat• Pan• Pancake Square-Phillips Recess• Trim Head• Round Washer• Wafer, Machine Screw Thread (#4 Point w/ Wings)(Zinc, Green Ceramic)• Flat Undercut (Spaced Thread)• Flat Undercut (Machine Screw Thread)• Flat, Machine Screw Thread (#4 Point w/ Wings)• Flat Undercut, Machine Screw Thread (#3 Point w/ Wings)• Hex Washer• Modified Truss• Oval• Oval, Countersunk Finishing Washer SEMS (#2 Point)• Oval Undercut• Pan (Spaced Thead)• Pan (Machine Screw Thread)• Pancake Phillips• Serrated Pan (Spaced Thread)• Special Pan Framing Screw (Zinc, Black Phosphate)• Round Washer• Trim Head• Wafer (Spaced Thread)• Wafer (Machine Screw Thread)• Wafer, Spaced Thread, Drill Point (Ceramic Green)• Wafer, High-Low Thread, Spade Point (Ceramic Green)• Wafer, High-Low Thread, Sharp Point (Ceramic Green)• Flat• Hex Washer Serrated• Modified Truss• Pan• Pan Serrated• Pancake Six-Lobe• Truss• Wafer (Spaced Thread)• Wafer (Machine Screw Thread)(Standard Head)• Serrated (Machine Screw Thread)• With Neo-EPDM Washers(#3 Point)• Machine Screw Thread (#1, #2, #3, #4, #5 Points)• Machine Screw Thread (#4 Point w/ Wings)• Serrated, Spaced Thread (#2, #3, #4 Points)• Serrated, Spaced Thread, High Head (#3 Point)• Serrated, Machine Screw Thread (#2 & #3 Points)• Serrated, Machine Screw Thread, Red Painted Head, 7/16” A.F. (#2 Point)• Serrated, Machine Screw Thread (#4 Point w/ Wings)• With Neo-EPDM Washers, Machine Screw Thread (#4 Point)• With Neo-EPDM Washers, Spaced Thread (#2, #3, #5 Points)All #2 / #3 points unless otherwise noted.

Page 4

ADDITIONAL FINISHESSTAINLESS STEELSTEEL BLACK ZINCSTEEL GREEN ZINCSTEEL YELLOW ZINCSTEEL BLACK OXIDEPHILLIPSSIX-LOBEUNSLOTTED• Hex Washer (18-8, 410)SQUARE RECESSSLOTTED (HEX WASHER)• Spaced Thread (18-8, 316, 410)• Spaced Thread (410 Black Oxide)• Machine Screw Thread (18-8)• Machine Screw Thread PHILLIPSPHILLIPS• Flat (#2 Point)• Flat UndercutPHILLIPS• Wafer, Machine Screw SLOTTED• Wafer, Machine Screw UNSLOTTED• Hex WasherSQUARE-RECESSSLOTTED / UNSLOTTED• Slotted (Hex Washer)• Unslotted (Hex Washer)••• Flat (18-8, 410)Pan (18-8, 410)Pancake (18-8, 410)• Wafer (18-8) •• Flat (18-8, 410)Pan (18-8, 410)• Pancake Square-Phillips Recess (18-8, 410)(#2, #4, #5 Points (410)• Machine Screw Thread, #4 Point w/ Wings (410)• Spaced Thread, #4, #5 Points (410)• Serrated, Spaced Thread (18-8)• Serrated, Machine Screw Thread (18-8)• Spaced Thread w/ Neo-EPDM Washer (18-8, 410)• Flat (18-8, 410)• Flat #4 Point w/ Wings, Machine Screw Thread (410)• Flat Undercut (18-8, 410)• Flat Undercut, Machine Screw Thread (18-8, 410)• Hex Washer (18-8)• Modified Truss (18-8, 410)• Oval (18-8, 410)• Oval Undercut (18-8)• Pan (18-8, 410 & 18-8 Black Oxide)• Pancake (18-8, 410)• Bugle, Drywall (410)• Wafer, Spaced Thread (18-8)• Wafer, Machine Screw Thread (18-8, 410)• Pan• Pan• Flat• Hex Washer• Oval• Pan• Modified Truss (Black Phosphate)• Wafer, Machine Screw Threads (#3 Point)Threads (#3 Point)• Wafer, Square-Phillips, Spaced Threads (#3 Point)Threads (#3 Point)• Wafer, Square-Phillips, Spaced Threads (#3 Point)All #2 / #3 points unless otherwise noted.

Page 5

DRILL CAPACITY CHARTDrilling capacities are not absolute and can vary from one lot to another. It’s best to test parts in desired application to verify screws areappropriate.SPACED THREADDrill screws with a Spaced Thread pitch are typically used to attach plywood, soft woods orcomposition board to metal. They can also be used to attach thin metal sheet to metal.MACHINE SCREW THREADDrill screws with a Unified (Machine Screw style) thread pitch are normally used tojoin thicker materials in order to reduce friction and driving torque.DIAMETERDIAMETERSIZEPOINT SIZEDRILLING CAPACITYMIN MAX.080.090.100.110.175.210.312.500DRILLING CAPACITYMIN MAX.080.090.100.110.175.210.312.500.220.312.500.312.312#4#6#8#10#10#12#12#121/4”1/4”1/4”5/16”5/16”8-32”10-24”10-24”10-24”12-24”12-24”1/4-20”1/4-20”#2#2#2#2#3#3#4#5#3#4#5#4#5#2#2#3#5#4#5#4#5.035.035.035.035.110.110.145.250.110.145.250.110.110.035.035.035.035.110.110.145.250

Page 6

NEWEST ADDITIONSTO OUR SELF-DRILLING SCREW PRODUCT LINEDRILL CAPACITY CHARTMACHINE SCREW THREAD WITH WINGSSPACED THREADDrill screws with remaining wings drill out a clearance hole in wood or other soft materials, thensnap off when in contact with the metal surface to be drilled. • SIX-LOBE SQUARE RECESSHEX WASHER UNSLOTTEDPHILLIPS Pan Hd Security Screws, 18-8 (Spaced & Machine Scr Thread)• Flat Hd Security Screws, 18-8• Pan Hd Steel, Black Ox• Pan Hd Steel, Black Zinc• High Hd, Stl w/1000-Hr Finish.• Flat Hd, Standard Pt—Stl Black Ox• Pancake Hd, #1 Pt—Stl w/1000-Hr Finish • Pancake Hd, #5 Pt—Stl w/1000-Hr Finish• Large Pancake Hd, #3 Pt—Stl w/1000-HrFinish • Flat Undercut (#12 w/#10 Hd),Standard Pt, Stl Z (Mach Scr Thrd)SPACED THREAD WITH STITCH POINTDIAMETERDIAMETERPOINT SIZEPOINT SIZEDRILLING CAPACITYMIN MAX.175.232.232DRILLING CAPACITYMIN MAX.075.094#121/4”10-24”12-24”1/4-20”#1#1#4#4#4.028.028.050.050.050

Page 7

Page 8

The Quality You Know ™The Quality You Trust Atlanta, GABaton Rouge, LABoston, MASalem, OHCharlotte, NCChicago, ILCleveland, OHDallas, TXDever, CODetroit, MIHartford,CTGarfield, NJHouston, TXNew Castle, PALos Angeles, CAPhiladelphia MetroMinneapolis, MNMiami, FLNashville, TNNew York City MetroPittsburgh, PAPortland, ORSalt Lake City, UTSan Francisco, CASayreville, NJSeattle, WASt. Louis, MOTampa, FLwww.fastenersolutions.com 866-463-2910Sales@fastenersolutions.comCall Us Now866-463-2910Fasteners, Kitting, Tools, Abrasives & SuppliesReady To Ship!fastenersolutions.comSame Day Delivery / Pick Up from these key cities

SELF DRILLING SCREWS