Return to flip book view

833-473-3368RedDotProducts.com465 N Reading Rd, Ephrata, PA 17522 Fax: (717) 740-6644RED DOT PRODUCTS PRODUCT CATALOG

CATALOG INDEXCAULKS & SEALANTS .................................................... 41CUPOLAS & WEATHERVANES .................................... 93ENTRY DOORS ................................................................. 100FASTENERS ...................................................................... 85HOUSE WRAP & UNDERLAYMENT ............................ 81INSULATION ..................................................................... 120METAL PANELS ................................................................ 12METAL ROOFING ACCESSORIES .................................. 16METAL ROOFING FASTENERS ..................................... 27PVC CEILING & WALL PANELS ................................... 70ROLL TRACK SLIDING DOORS ....................................105ROOF BOOTS ..................................................................... 53S-5!® CLAMPS ...................................................................130SKYLIGHTS & SIDELIGHTS .......................................... 77SNOW RETENTION SYSTEMS .................................... 123SQUARE TRACK SLIDING DOORS ...............................116VENTILATION & CLOSURES ........................................ 58

CUSTOM WIDTHS AND LENGTHSWe source coils direct from the mill for better quality and pricing.The Advantage for You...• Oer a full line of color-matched accessories like trims, snow guards, screws, caulk, touch-up paint, ventilation, cupolas, pop rivets, aluminum coil stock, and more!• Take advantage of Sherwin-Williams’ 40-year warranties that do NOT require the property owner to document a yearly washing.COIL SALESG-90 Galvanized Acrylic 29gaAZ55 Galvalume Acrylic 29ga, 26ga, & 24gaPainted G-100 28gaPainted AZ50 28ga & 26ga833-473-3368DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com4

*CONTINUOUS CORRUGATED NOT RECOMMENDED FOR ROOFING DUE TO SHORT RIB HEIGHT AND NO ANTISIPHON CHANNEL5-V CrimpCoil Stock24” wide coverageMade to custom lengths42” wide coils and custom slit width options available CC = Color Code * = Size5

Whitewash Cedar Natural CedarDark Cedar Gray Cedar Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com6

CEDAR PRINTSGAUGE26 gauge steel FINISHSemi-textured Woodgrain Stenciled Ink Print Finish SUBSTRATEAZ50 GalvalumeWARRANTY20-year limited paint warranty for vertical wall application CC = Color Code * = Size7

Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com8

Common Applications • Interior Accent Walls and Wainscoting• Exterior Siding and WainscotingFeatures • Substrate: AZ-50 Galvalume • 29 Gauge Steel• Made to custom lengths• 25-year warranty* Continious corrugated panels not recommended for roong due to short rib height and no anti-siphon channel.C1SCA 1-1/4” Corrugated Realtree Camo * 29 24”C2SCA 2-1/2” Corrugated Realtree Camo * 29 24”COSCA CAMO Standard Coil AZ50 29 40.875”Part# Description Gauge Cvg.CAMO PRINTRealtree® Printed Camouage CC = Color Code * = Size9

Awesome Looks. Long-lasting Performance. TEXTURED BLACKTEXTURED SHADOW GRAY Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com10

Why Choose Textured? Our textured coils continue to be very popular in residential and commercial applications.Property owners like it because the unique textured surface redirects sunlight for less glare than smooth panels. Plus the textured panels are less prone to “oil canning” which makes for a more attractive roof.Contractors like it because the texture provides more grip during installation than smooth panels.Because the textured coating is baked into the metal coil at the factory, our textured coils carry the same 40-year lm integrity warranty as our smooth coils.Textured SmoothTEXTURED BLACKSAME 40-YEAR WARRANTY CC = Color Code * = Size11

METAL PANELS

CONTINUOUSCORRUGATEDCONTINUOUSCORRUGATEDMADE TO CUSTOM LENGTHSIN ALL OF OURCOLORS!

2-½” Corrugated - Steel26-⁄” Overall24” Coverage1 ⁄”2 ⁄”½”1-¼” Corrugated - Steel26 ½” Overall1 ¼”¼”⁄”24” CoverageFSC258 2-1/2” Corrugated Pre-cut Galvanized Panel 29 24” 8’FSC2510 2-1/2” Corrugated Pre-cut Galvanized Panel 29 24” 10’FSC2512 2-1/2” Corrugated Pre-cut Galvanized Panel 29 24” 12’C2Scc 2-1/2” Corrugated Galvalume Panel in AZ50 Colors 28 24” CustomC2STcc26 2-1/2” Corrugated Galvalume Panel in Textured Colors 26 24” CustomC2Scc26 2-1/2” Corrugated Galvalume Panel in 26 ga. AZ50 Colors 26 24” CustomC2SKcc26 2-1/2” Corrugated Galvalume Panel in Kynar Colors 26 24” CustomCommon Applications • Interior Accent Walls and Wainscoting • Exterior Siding and WainscotingFeatures • Maximum Coverage: 24”• Rib Spacing: 1-¼”• Unpainted Substrate: G-90 Galvanized or AZ-55 Galvalume (not recommended for animal connement)• Painted Substrate: AZ-50 Galvalume (not recommended for animal connement)• Available in over 50 Energy-ecient Colors*• Made to custom lengths• 40-year warranty (see warranty for details) * Not all colors available in every gauge. See color chart for details and availability.Not recommended for roong due to short rib height and no anti-siphon channel.Common Applications • Interior Accent Walls and Wainscoting • Exterior Siding and WainscotingFeatures • Maximum Coverage: 24”• Rib Spacing: 2-½”• Unpainted Substrate: G-90 Galvanized or AZ-55 Galvalume (not recommended for animal connement)• Painted Substrate: AZ-50 Galvalume (not recommended for animal connement)• Available in over 50 Energy-ecient Colors*• Made to custom lengths• 40-year warranty (see warranty for details) * Not all colors available in every gauge. See color chart for details and availability.Not recommended for roong due to short rib height and no anti-siphon channel.FSC1258 1-1/4” Corrugated Pre-cut Galvanized Panel 29 24” 8’FSC12510 1-1/4” Corrugated Pre-cut Galvanized Panel 29 24” 10’FSC12512 1-1/4” Corrugated Pre-cut Galvanized Panel 29 24” 12’C1Scc 1-1/4” Corrugated Galvalume Panel in AZ50 Colors 28 24” CustomC1STcc26 1-1/4” Corrugated Galvalume Panel in Textured Colors 26 24” CustomC1Scc26 1-1/4” Corrugated Galvalume Panel in 26 ga. AZ50 Colors 26 24” CustomC1SKcc26 1-1/4” Corrugated Galvalume Panel in Kynar Colors 26 24” CustomPart# Description Gauge Cvg. LengthPart# Description Gauge Cvg. LengthMETAL PANELS METAL PANELS METAL PANELS METAL PANELS Metal Panels Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com14

5-V Crimp - Steel26” Overall12”½”½”1”1”24” CoveragePart# Description Coverage LengthFS5V8 Galvanized 5V Crimp (Spangle may vary) 24” 8’FS5V10 Galvanized 5V Crimp (Spangle may vary) 24” 10’FS5V12 Galvanized 5V Crimp (Spangle may vary) 24” 12’C5cc Painted 5V Crimp In All Our Colors 24”9”3/4”28 Gauge Perforated Panel0.125” holes give 13.5% open-area across the Perforated Panel. Because the perforation drastically decreases reverb, it is a great option for a ceiling panel in noisy environments such as oices, workshops, reception centers, or retail locations.Available in white and made to custom lengths.APMMETAL PANELS METAL PANELS METAL PANELS METAL PANELS Metal Panels CC = Color Code * = Size15

METAL ROOFING ACCESSORIES

Part# DescriptionSizePTUABMcc Touch Up Paint for WeatherXL Colors - Can 4 ozPTUABMccP Touch Up Paint for WeatherXL Colors - Pen 0.3 ozPTUABScc Touch Up Paint for Fluropon Colors - Pen 0.3 ozPart# DescriptionThickness SizeCSAcc Aluminum Coil Stock - Mastic 0.019 24" x 50'CSScc Steel Coil Stock 29 ga / 26 ga 21" x 50'CSSTcc Textured Steel Coil Stock 26 ga 21" x 50'CSSGV Acrylic-Coated Galvanized Steel 29 ga 27.5" x 50'Touch Up PaintCoil StockAs careful as you might try to be, even the very best installers might not make it throughout the installation process without a scratch. And since the paint is the rst line of defense against a rusting metal panel, it is imperative that the scratch be repaired. That's where our touch up paint comes in. A word of caution though. Because the performance of touch up paint is rarely the same as the factory-applied nish, it should always be used in moderation and only as much as is necessary.Features • Color-matched to our metal panel colors.• Available in 4 oz cans with a lid brush for our WeatherXL colors, and 0.3 oz paint pens for our WeatherXL and Fluropon Panel colors.Stocked in popular colors.CSAWHMETAL ROOFING ACCESSORIESMETAL ROOFING ACCESSORIESMetal Roong AccessoriesCC = Color Code * = Size17

Features superior hardened blade edges for maximum cutting life. Riveted, head-to-handle compound linkage multiplies hand leverage applied by user. Linkage will not rattle or loosen ever! And an easily adjustable pivot bolt, with nylon locking nut, holds its adjustment securely for these hard-working aviation snips.Features superior hardened blade edges for maximum cutting life. Riveted, head-to-handle compound linkage multiplies hand leverage applied by user. Linkage will not rattle or loosen ever! And an easily adjustable pivot bolt, with nylon locking nut, holds its adjustment securely for these hard-working aviation snips.With an overall length of only 7-⁄ inches (181 mm), the AVsMini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A ¾ inch (19 mm) length of cut provides the optimum speed for conned cutting applications where this small, maneuverable snip excels. Each snip is made with forged steel jaws that contain precision-ground serrations on the lower blade, which produces a sharply dened edge for cutting accuracy and control.Malco Oset AV Aviation Snips feature grooved non-slip POWER-FIT™ performance hand grips that naturally distribute pressure evenly across the user’s hand, resulting in a more natural feel with less fatigue and increased strength. Safety hand guards allow the user to cut quickly into sheet metal, while preventing the hand from slipping forward over the blades. A self-opening latch provides convenience for the user to quickly open.Part# DescriptionHandling/Cutting ColorTOAV6 Offset Aviation Snip Right Hand/Left Cut RedTOAV7 Offset Aviation Snip Left Hand/Right Cut GreenPart# DescriptionHandling/Cutting ColorTOAVM6 Mini Aviation Snip Right Hand/Left Cut RedTOAVM7 Mini Aviation Snip Left Hand/Right Cut GreenPart# DescriptionHandling/Cutting ColorTOM2001 MAX 2001 Snip Right Hand/Left Cut RedTOM2002 MAX 2002 Snip Left Hand/Right Cut GreenTOM2003 MAX 2003 Snip Combo Cut YellowTOM2004 MAX 2004 Snip Double Cut YellowPart# DescriptionHandling/Cutting ColorTOM2006 Offset MAX 2006 Snip Right Hand/Left Cut RedTOM2007 Offset MAX 2007 Snip Left Hand/Right Cut GreenOset Aviation Snips - MalcoMini Aviation Snips - MalcoMAX Snips - MalcoMAX Oset Snips - MalcoA.B.C.D.A.B.C.D.TOM2006TOAVM6TOAV6TOM2007TOAVM7TOAV7ALUMINUM COPPER GALVANIZED STEEL MILLED STEEL STAINLESS STEEL.062 (1.57) .054 (1.37) .054 (1.37) | 18 GA. .048 (1.22) | 18 GA. .038 (0.97) | 20 GA.CAPACITIESALUMINUM COPPER GALVANIZED STEEL MILLED STEEL STAINLESS STEEL.062 (1.57) .054 (1.37) .054 (1.37) | 18 GA. .048 (1.22) | 18 GA. .038 (0.97) | 20 GA.CAPACITIESALUMINUM COPPER STAINLESS STEEL GALVANIZED STEEL MILLED STEEL .062 (1.57) .054 (1.37) .036 (0.91) | 20 GA. .052 (1.32) | 18 GA. .048 (1.22) | 18 GA.CAPACITIESCOLD ROLLED STEEL STAINLESS STEEL.024 (0.61) | 24 GA. .028 (0.38) | 28 GA.CAPACITIESTop SellerTop SellerMETAL ROOFING ACCESSORIESMETAL ROOFING ACCESSORIESMetal Roong Accessories Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com18

Part# DescriptionTON2R 1" Hand NotcherPart# DescriptionTOTS1 Metal Cutting Shear AttachmentTOTSCM Corrugated Metal Turbo Shear AttachmentTOTSHD Heavy Duty Turbo Shear AttachmentHand Notcher - MalcoPower Shears - MalcoTOTS1TOTSHDTOTSCMSpecialized for folding and fabricating metal, including metal ductwork. The N2R Hand Notcher makes a full 1-inch (25.4 mm) deep “V” shaped cut.Sleek styling, easy blade replacement and larger handles make the Andy™ Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in vinyl siding, aluminum, copper, or sheet metal. Part# DescriptionTOMC12A 12" Andy Classic SnipTOMC12N 12" Lightweight Andy SnipTOMC14N 14" Aluminum Andy SnipTOMC12NG 12" Lightweight Aluminum SnipTOMC14A 14" Aluminum SnipAndy Snips - MalcoA.B.C.D.E..A.D.B.E.C.ALUMINUM COPPER STAINLESS STEEL GALVANIZED STEEL MILD STEEL .035 (0.89) .023 (0.58) .018 (0.46) | 26 GA .028 (0.71) | 24 GA .024 (0.61) | 24 GACAPACITIESALUMINUM COPPER STAINLESS STEEL GALVANIZED STEEL MILD STEEL .035 (0.89) .023 (0.58) .018 (0.46) | 26 GA .028 (0.71) | 24 GA .024 (0.61) | 24 GACAPACITIESMETAL ROOFING ACCESSORIESMETAL ROOFING ACCESSORIESMetal Roong AccessoriesCC = Color Code * = Size19

Part# DescriptionTOSC2 Single CrimperPart# DescriptionTOSL2R Snap Lock PunchSingle Crimper - MalcoSnap Lock Punch - MalcoFast, easy to use, and lightweight. Handy lock makes tool pocket sized. Zinc plated steel. Red grips.The Malco model SL2R Adjustable Snap Lock Punch can be used as a gutter end cap crimper or for use in creating locking tabs in light sheet metals. A slide adjustment for throat depth allows settings from ¼ to ⁄ inch (6 to 16 mm) depth. An Engineered handle opening compliments the natural power stroke of any user’s hand and maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage.Use the versatile Malco J-Channel Cutter to make drain tabs, downstream notch cutouts and miter trim cuts in vinyl channel. Light hand pressure produces a single handle click signal to ensure perfect drain tabs every time. Use either side of the jaws to cut a 45-degree miter for a professional nished look.Part# DescriptionBlade DepthTOJCCR J-Channel Cutter 5/8" - 1-1/4"Part# DescriptionBlade DepthTOM12ARB Replacement Blade For M12A 5/8" - 1-1/4"TOM12NRB Replacement Blade For M12n/M12ng SnipsTOM12RB Replacement Blade For M12TOM14ARB Replacement Blades For M14ATOM14NRB Replacement Blades For M14N # M14NRBTOM14RB Replacement Blades For M14TOM2014RB Replacement Blades For M2014TOMC12ARB Replacement Blade For Mc12a SnipsTOMC12NRB Replacement Blades For Mc12n/Mc12ngTOMC12RB Replacement Blade For Mc12a SnipsTOMC14ARB Replacement Blade For Mc14a SnipsTOMC14NRB Replacement Blades For Mc14nTOMC14RB Replacement Blades For MC14TOTS1RB Turbo Shear Replacement Blades For Small Turbo ShearTOTSCMRB Turbo Shear Replacement Blades For TSCMTOTSHDRB Replacement Blades For Hd Turbo ShearJ-Channel Cutter - MalcoReplacement Blades - MalcoALUMINUM COPPER STAINLESS STEEL GALVANIZED STEEL MILD STEEL .035 (0.89) .023 (0.58) .018 (0.46) | 26 GA .028 (0.71) | 24 GA .024 (0.61) | 24 GACAPACITIESMETAL ROOFING ACCESSORIESMETAL ROOFING ACCESSORIESMetal Roong Accessories Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com20

Part# DescriptionJWVS James Way Valley SquaretoolPart# DescriptionJWS James Way SlitterJWSRW Replacement wheels /James Way Slitter Metal & VinylJames Way Valley SquareJames Way SlitterAluminum frame with stainless steel hardware. Invented and manufactured by the Amish in Pennsylvania. This square is designed to improve speed and quality when installing metal roong in valleys. It eliminates the need for chalking vertical lines for each piece of metal and countless times of pulling out a tape measure. The tabbed side of the square is place against the last roong panel, and the side leg is aligned with the valley and secured with the adjustment leg. The square is then laid on the next piece, instantly transferring the angle of the valley.Heavy-duty hand-operated metal slitter for Aluminum, Steel, and Vinyl. Easily and smoothly cuts up to 24 gauge metal. Made from ¾" milled aluminum for long-lasting performance.Part# DescriptionHandling/Cutting ColorTOM2110L Mag Snips Left Hand/Right Cut RedTOM2210R Mag Snips Right Hand/Left Cut GreenPart# DescriptionHandling/Cutting ColorTOP6510L 18 Ga. Offset Snips Right Hand/Left Cut RedTOP6510R 18 Ga. Offset Snips Left Hand/Right Cut GreenTOP6516 20 Ga. Power Cutter Offset Long Cut BlueTOSSP6510L 22 Ga. Stainless Steel Offset Snips Right Hand/Left Cut RedTOSSP6510R 22 Ga. Stainless Steel Offset Snips Left Hand/Right Cut GreenMag Snips - MidwestOset Snips - MidwestA.B.C.D.E.A. B.C.D.E.TOM2110LTOM2210RTop Seller Top Seller Top SellerCOLD ROLLED STEEL STAINLESS STEEL24 GA. 28 GA.METAL ROOFING ACCESSORIESMETAL ROOFING ACCESSORIESMetal Roong AccessoriesCC = Color Code * = Size21

Part# DescriptionY48-22-4000 9-3/4" 16 Ga. Bulldog ShearsPart# DescriptionY48-22-4002 12" 20 Ga. Classic TinnerY48-22-4003 10" 22 Ga. Classic TinnerY48-22-4004 10" 22 Ga. Duckbill TinnerY48-22-4005 10" 18 Ga. Compound TinnerY48-22-4006 13" 24 Ga. Lightweight TinnerY48-22-4001 16" 16 Ga. Bulldog TinnerY48-22-4007 Lightweight Tinner Replacement BladesPart# DescriptionHandling/Cutting ColorY48-22-4510 Cutting Snips Left Cut RedY48-22-4520 Cutting Snips Right Cut GreenY48-22-4530 Cutting Snips Straight Cut YellowPart# DescriptionHandling/Cutting ColorY48-22-4512 18 Ga. Cutting Snips Left Cut RedY48-22-4522 18 Ga. Cutting Snips Right Cut GreenPart# DescriptionHandling/Cutting ColorY48-22-4511 24 Ga. Cutting Angle Snips Left Cut RedY48-22-4521 24 Ga. Cutting Angle Snips Right Cut GreenPart# DescriptionHandling/Cutting ColorY48-22-4532 Offset Aviation Snips Straight Cut YellowY48-22-4537 20 Ga. Aviation Snips Long Straight Cut YellowY48-22-4538 Offset Aviation Snips Long Straight Cut RedY48-22-4533 3 Piece Aviation Snips Set R/Y/GBulldog Shears - MilwaukeeTinners - MilwaukeeCutting Snips - Milwaukee18 Gauge Cutting Snips - Milwaukee24 Gauge Cutting Snips - MilwaukeeAviation Snips - MilwaukeeA.B.C.D.A. B. C. D.A.B.C.D.E.F. A.C.E.B.D.F.Top SellerTop SellerTop SellerTop SellerMETAL ROOFING ACCESSORIESMETAL ROOFING ACCESSORIESMetal Roong Accessories Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com22

Part# DescriptionTOS2R 3" Hand Seamer RedlineTOS3R 3" Offset Hand Seamer RedlineTOS5R 5" Hand Seamer RedlineTOS6R 6" Hand Seamer RedlineTOS9 9" Hand Seamer RedlineHand Seamers - MalcoA.B.C.D.E.A.D.B.E.C.Part# DescriptionTypeTOSG10 Seamer & Tongs Straight Gripped JawsTOSG11 Offset Seamer & Tongs Gripped JawsSeamer and Tongs - MalcoTOSG10TOMW6HBTOMWS6TOMWTS9TOMWTF3YWF18YWF24YWS4 YWS6TOSG11ABSBTH24Part# DescriptionSizeMPHT15.25 Metal Panel Hemming Tool with Single Handle - Steel 15.25"MPHT20 Metal Panel Hemming Tool with Single Handle - Steel 20"Part# DescriptionTOMW6HB 6" Adjustable Hand Brake - MidwestTOMWS6 6" Hand Seamer - MidwestTOMWTS9 9" Hand Seamer - MidwestTOMWTF3 24" Folding Tool - MidwestABSBTH24 24" Abs Bending Tool {Hemming Tool With Handle} - MalcoYWF18 18" Folding ToolYWF24 24" Folding ToolYWS4 3" Offset Hand SeamerYWS6 6" Hand SeamerMetal Panel Hemming Tools - JS DesignFolding ToolsMETAL ROOFING ACCESSORIESMETAL ROOFING ACCESSORIESMetal Roong AccessoriesCC = Color Code * = Size23

Part# DescriptionLength Throat Frame Max Gauge StandTOBIM1065 VanMark Industrial Metal Master 10' 6" 20" 7 C-Frames 20-24 Ga. Steel/.05 Alum. •Part# DescriptionTOB3017TRIMTrimCutter for VanMarkPart# DescriptionLength Throat Frame Max GaugeTOBMM1060 VanMark Metal Master 10' 6" 20" 4 C-Frames 29 Ga. Galv./.027 Alum.TOBMM1061 VanMark Metal Master 10' 6" 20" 5 C-Frames 26 Ga. Galv./.032 Alum.Part# DescriptionLength Throat Frame Max GaugeTOBT1050 VanMark Trim-A-Brake II 10' 6" 13" 5 C-Frames 26 Ga. Galv./.024 AlumTOBT850 VanMark Trim-A-Brake II 8' 6" 13" 4 C-Frames 26 Ga. Galv./.024 AlumVanmark Industrial Metal Master BrakeVanmark TrimCutterVanmark Metal Master BrakeVanmark Trim-A-Brake IIThe Metal Master® 20 was originally designed for the metal roong industry and this why it is engineered the largest throat depth portable bending brake available. POWERlock™ provides a strong clamping without need for adjusting. POWERslot™ hinge "auto-measures" 5 ⁄ 8" hem with ease. Increased bending radius simplies hemming resulting in faster, easier operations.Great for bending basic shapes to trim out windows, doors, and much more. The simple design makes it easy for even the novice user to bend metal. Hinge pockets help prevent damage to the brake while scoring. Full loop handle provides uniform bending along entire piece. Material stops allow repeat bending without re-measuring. Design with a 3 ⁄ 8" x 13" working pocket.Its unique low-prole and 4-point track system keeps the tool adjacent to the brake and cutting accurately. The hardened steel knives cut up to 24 ga. Painted Steel Grade D and are design to cut through thousands of feet of material without getting dull while leaving a “factory” smooth edge that is free of sharp points.The Industrial Metal Master® 20 EZ comes with the latest in manufacturing to provide the best one-stop-shop for all your job site bending, from "W" style valley-pan & rake edges, to sots & roof ashings, including wide hip and ridge cap, to HVAC duct & plenum work. POWERlock™ provides a strong clamping without need for adjusting. POWERslot™ hinge "auto-measures" 5 ⁄ 8" hem with ease. Increased bending radius simplies hemming & over-bending resulting in faster, easier operations. Stand included.MORE SPECIAL ORDER BRAKES AVAILABLESTANDS OR LEGS SOLD SEPARATELYSTANDS OR LEGS SOLD SEPARATELYPart# DescriptionLength Throat Frame Max GaugeTOBTM10-S VanMark TrimMaster Mark II 10' 6" 14" 5 C-Frames 29 Ga. Galv./.032 Alum.TOBTM1061VanMark Heavy Duty TrimMaster Mark II10' 6" 14" 9 C-Frames 26 Ga. Galv./.032 Alum.TOBTM6 VanMark TrimMaster Mark II 6' 6" 14" 3 C-Frames 26 Ga. MaxTOBTM8-S VanMark TrimMaster Mark II 8' 6" 14" 4 C-Frames 26 Ga. MaxVanmark TrimMaster Mark IIThe POWERslot™ Hinge “auto-measures” to a 5 ⁄ 8" bend to make tight pockets for vinyl siding and ber cement boards. The durable Cam-Locking has proven year after year to be reliable without constant adjustments. POWERlock™ provides a strong clamping without need for adjusting. POWERslot™ hinge "auto-measures" 5 ⁄ 8" hem with ease. Increased bending radius simplies hemming resulting in faster, easier operations.STANDS OR LEGS SOLD SEPARATELYTOBTM10-S PICTUREDTOBMM1061 PICTUREDMETAL ROOFING ACCESSORIESMETAL ROOFING ACCESSORIESMetal Roong Accessories Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com24DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Part# DescriptionTOBUSA1LEGUSA1 UniStand w/ Wheels for Brakes, Up to 14" ThroatTOBUSA2LEGUSA2 UniStand w/ Wheels 20 Series Brakes, 20" ThroatPart# DescriptionTOB3001LEG Steel Leg Kit for Trim A Brake I & IITOB3002LEG Steel Leg Kit for Mark I & IIPart# DescriptionTOBUNL1 UniLeg UNL1 for 14" Throat BrakesTOBUNL2 UniLeg UNL2 for 20" Throat BrakesPart# DescriptionTOBCC24 Coil Cradle (Holds up to 24" Coil Stock up to 300 lbs)TOBCD24 Coil Dispenser (24" With Score Guide)Part# DescriptionTOB3004WHL Wheel Kit ts USA1 & USA2 StandsPart# DescriptionTOBMGA Multi-Gauge, Angle & Trim Cutter Guide (3978 Vanmark)Vanmark UniStandVanmark Leg KitVanmark UniLegVanmark Coil Cradle and DispenserVanmark Wheel KitVanmark Angle and Trim Cutter GuideThe UniStand™ Adjustable was designed to provide a stand as strong as Van Mark’s bending brakes are. It has a stand that is both rigid, durable, and adjustable to meet the user’s need. The wheels now make it easy to transport your tool anywhere on the jobsite. The Van Mark Steel Folding Legs are a strong and durable stand that folds up for transport and storage. It is easily installed using a Phillips screwdriver. The Van Mark Wheel Kit can be quickly installed on any Van Mark Brake. The durable wheel kit will make it easier to move a bending brake around the jobsite. The UniLeg™ was engineered to make a simple, yet durable leg kit for any contractor. The 2-piece design makes it easy for one user to setup at any jobsite without needing any tools. The 100% Steel Welded Construction will the allow the legs to last as long as the Van Mark tool does. The Multi Gauge™ is one of those tools that any Van Mark brake user should not be without. Its lightweight design and versatility makes it easy to set up and easy to use. No more guessing on bend angles, no more measuring 1 ½" out for your TrimCutter™. Speed up your jobs and make your bends more accurate. The Multi Gauge™ is sold as a pair.TOBCC24TOBCD24METAL ROOFING ACCESSORIESMETAL ROOFING ACCESSORIESMetal Roong AccessoriesCC = Color Code * = Size25DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Part# DescriptionMax GaugeABMACD Panel Chop Shear with Detachable Blades 24 gaugePart# DescriptionABMBLADE Set of Replaceable Angle Cut Blades ABMBLADESTRAIGHT Set of Replaceable Straight Cut BladesAg Panel Shear with Detachable BladesPanel Shear Replacement BladesThis portable shear is a great, aordable tool for cutting metal roong and siding panels quickly and easily. This shear can cut multiple proles and angles by changing the blades. Straight and angle cuts with gable pitches up to ⁄ can be accomplished with only one tool by using 2 sets of blades. A handy rubber tipped clamp rmly holds the panel in place for accurate, and fast cutting. ABMBLADESTRAIGHTMORE SPECIAL ORDER SHEERS AND PROFILE BLADES AVAILABLEMETAL ROOFING ACCESSORIESMETAL ROOFING ACCESSORIESMetal Roong Accessories Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com26DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

METAL ROOFING FASTENERS

?10METAL TO WOOD• Fastener designed to attach steel roong & siding used in post-frame & residential metal roong applications.• Threads transition from ne to coarse to generate superior holding strength in various wood substrates.• Micro-Bit™ point reduces metal shavings that can embed themselves in the rubber washer.• EPDM rubber is vulcanized to a steel washer to form an excellent seal even when driven at an angle.The combination of the Micro-Bit point & transition thread from ne to coarse generates superior drill speed in metal & holding strength in wood substrates.SIZE HEAD STYLE CARTON QTY. WEIGHT/M10 x 1” 1/4” HWH 3000 7.810 x 1-1/2 ” 1/4” HWH 2500 9.910 x 2” 1/4” HWH 2000 12.210 x 2-1/2” 1/4” HWH 1500 14.310 x 3” 1/4” HWH 1000 16.312 x 3/4” STITCH 1/4” HWH 2500 8.8TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH10-16/8 MICRO-BIT .205/.191 .121/.116 .348/.322 NOM. .250” 1904 LBS. 56 IN.-LBS. 1547 LBS.#12-14 STITCH MICRO-BIT .215/.209 .160/.153 .348/.322 NOM. .250” 2900 LBS. 88 IN.-LBS. 1962 LBS.PULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#10 W/ BONDED 12 MM WASHER378 629 721 N/A N/A N/A N/A#12-14 STITCH W/ BONDED 12 MM WASHER378 629 721 N/A N/A N/A N/AMB™®®PULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATE MATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105(3) (4) (3) (4) (3) (4) (3) (4) (1) (2) (4) (1) (2) (4)10-16/8 N/A N/A N/A 636 N/A 441 N/A 368 N/A 210 N/A 713 1526 N/A 466 1216 N/A#12-14 STITCH N/A N/A N/A N/A N/A N/A 297 N/A 329 N/A 217 N/A N/A 495 N/A N/A 162Hex Washer Head with EPDM rubber washer provides a watertight seal on roof applications. ST Fastening Systems sockets are designed to allow for the added thickness of the powder coat.Powder Coated PaintZinc Plating and Chromate SealerEPDM Rubber Seal(1) 1” PENETRATION(2) 1 1/2” PENETRATION(3) FULL PENETRATION(4) 1/2” PENETRATIONALL UNPAINTED WOODBINDER MB FASTENERS COME STANDARD WITH DURASEAL® PLUS ENHANCED CORROSION RESISTANCE COATINGFOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.NOTES: 1. All strength values shown below are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limitPULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (3) (4) (3) (4) (3) (4) (3) (4) (1) (2) (4) (1) (2) (4)10-16/8 N/A N/A N/A 636 N/A 441 N/A 368 N/A 210 N/A 713 1526 N/A 466 1216 N/A#12-14 STITCH N/A N/A N/A N/A N/A N/A 297 N/A 329 N/A 217 N/A N/A 495 N/A N/A 162TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH10-16/8 MICRO-BIT .210/.191 .121/116 .500” NOM .312” 1585*** LBS. 60 IN.-LBS. 1574 LBS.#12-14 STITCH MICRO-BIT .215/.209 .160/.153 .500” NOM .312” 2900 LBS.* 88 IN.-LBS. 1962 LBS.• Designed to fasten steel roong to wood purlins used in post-frame construction, plywood or OSB used in residential construction.• 5/16” cupped HWH with a molded ZAMAC 5 Zinc-Aluminum alloy provides lifetime protection against red rust on the head & washer. The ZAMAC 5 alloy provides more strength than more common ZAMAC 3 alloy. (You may obtain a free copy of the written warranty upon request.)• ZXL™ is an excellent choice for GALVALUME & other long-life metal roof panels.• Threads transition from ne to coarse to generate superior holding strength in various wood substrates.• Micro-Bit point reduces metal shavings that can embed themselves in the rubber washer. The combination of the Micro-Bit point & transition thread from ne to coarse generates superior drill speed in metal & holding strength in wood substrates.PULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .01410-16/8 (EPDM ONLY) 658 927 1035 1386 N/A N/A N/A#12-14 STITCH SD (EPDM ONLY)658 927 1035 1386 N/A N/A N/ASIZE HEAD STYLE CARTON QTY. WEIGHT/M10 x 1” 5/16” CHWH** 3000 12.710 x 1-1/2” 5/16” CHWH** 2500 14.710 x 2” 5/16” CHWH** 2000 17.010 x 2-1/2” 5/16” CHWH** 1500 19.210 x 3” 5/16” CHWH** 1000 21.012 x 3/4”STITCH 5/16” CHWH** 2500 9.0**CHWH-Cupped Hex Washer Head.*** Tabulated value is the force at which the ZXL head breaks from the carbon steel body.New Micro-Bit Engineering™MB™New Micro-Bit Engineering™MB™®MBZXL™™The Zinc-Aluminum alloy HWH prevents red rust from ever starting. ST Fastening Systems spring retainer sockets are designed to allow for the added thickness of the powder coat and are recommended.Powder Coated PaintZinc Aluminum Molded HeadEPDM Rubber SealNo Red-Rust Guaranteed!FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.(1) 1” PENETRATION(2) 1 1/2” PENETRATION(3) FULL PENETRATION(4) 1/2” PENETRATIONNOTES: 1. All strength values shown below are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limitARCHITECTURALSERIESARCHITECTURALSERIES?9METAL TO WOODIntroducingMinimizes PigtailsEliminates Slow or No DrillEasy Multi-LayerPenetrationNew Micro-Bit Engineering™MB™The #1 complaint regarding sharp point screws is that they often drill slowly or not at all. ST Fastening Systems has married its metal building fastener technology into its new KWIKSEAL® MB with micro-bit engineering. This KWIKSEAL MB will eliminate the slow drill or no drill complaint. The transition thread will still generate superior holding strength in all wood substrates. The point will generate small metal shavings & eliminate the long “pigtail” prevalent with sharp point screws. It all adds up to a cleaner, more consistent drill point.DuraS al Plus ® CORROSION RESISTANT COATINGFOR UNPAINTED FASTENERSStronger, More Consistent, Drill PointFOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER.IMPACT DRIVERPart# DescriptionCarton Qty Head Size SizeS1cc 1" WoodBinder Metal-to-Wood Screw 3000 1/4" #10 x 1"S15cc 1-1/2" WoodBinder Metal-to-Wood Screw 2500 1/4" #10 x 1-1/2"S2cc 2" WoodBinder Metal-to-Wood Screw 2000 1/4" #10 x 2"S25cc 2-1/2" WoodBinder Metal-to-Wood Screw 1500 1/4" #10 x 2-1/2"S3cc 3" WoodBinder Metal-to-Wood Screw 1000 1/4" #10 x 3"SD34cc 3/4" WoodBinder Metal-to-Wood Stitch Screw 2500 1/4" #12 x 3/4”WoodBinder - ST Fastening SystemsOur most popular screw by far is the WoodBinder screw from ST Fastening Systems. We supply millions of these screws each year – most of which are used to attach our ABM Panel to post frame and residential metal roong and siding applications. We use our buying power to get you better pricing - even on direct ship orders.Sold in bags of 100 and 250. Color-matched colors in stock, with many more colors available for direct ship. Features • Fastener designed to attach steel roong & siding used in post-frame & residential metal roong applications.• Powder Coated for exceptional corrosion resistance.• Threads transition from ne to coarse to generate superior holding strength in various wood substrates.• Micro-Bit™ point reduces metal shavings that can embed themselves in the rubber washer.• EPDM rubber is vulcanized to a steel washer to form an excellent seal even when driven at an angle.METAL ROOFING FASTENERSMETAL ROOFING FASTENERSMetal Roong Fasteners Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com28DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

?10METAL TO WOOD• Fastener designed to attach steel roong & siding used in post-frame & residential metal roong applications.• Threads transition from ne to coarse to generate superior holding strength in various wood substrates.• Micro-Bit™ point reduces metal shavings that can embed themselves in the rubber washer.• EPDM rubber is vulcanized to a steel washer to form an excellent seal even when driven at an angle.The combination of the Micro-Bit point & transition thread from ne to coarse generates superior drill speed in metal & holding strength in wood substrates.SIZE HEAD STYLE CARTON QTY. WEIGHT/M10 x 1” 1/4” HWH 3000 7.810 x 1-1/2 ” 1/4” HWH 2500 9.910 x 2” 1/4” HWH 2000 12.210 x 2-1/2” 1/4” HWH 1500 14.310 x 3” 1/4” HWH 1000 16.312 x 3/4” STITCH 1/4” HWH 2500 8.8TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH10-16/8 MICRO-BIT .205/.191 .121/.116 .348/.322 NOM. .250” 1904 LBS. 56 IN.-LBS. 1547 LBS.#12-14 STITCH MICRO-BIT .215/.209 .160/.153 .348/.322 NOM. .250” 2900 LBS. 88 IN.-LBS. 1962 LBS.PULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#10 W/ BONDED 12 MM WASHER378 629 721 N/A N/A N/A N/A#12-14 STITCH W/ BONDED 12 MM WASHER378 629 721 N/A N/A N/A N/AMB™®®PULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATE MATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105(3) (4) (3) (4) (3) (4) (3) (4) (1) (2) (4) (1) (2) (4)10-16/8 N/A N/A N/A 636 N/A 441 N/A 368 N/A 210 N/A 713 1526 N/A 466 1216 N/A#12-14 STITCH N/A N/A N/A N/A N/A N/A 297 N/A 329 N/A 217 N/A N/A 495 N/A N/A 162Hex Washer Head with EPDM rubber washer provides a watertight seal on roof applications. ST Fastening Systems sockets are designed to allow for the added thickness of the powder coat.Powder Coated PaintZinc Plating and Chromate SealerEPDM Rubber Seal(1) 1” PENETRATION(2) 1 1/2” PENETRATION(3) FULL PENETRATION(4) 1/2” PENETRATIONALL UNPAINTED WOODBINDER MB FASTENERS COME STANDARD WITH DURASEAL® PLUS ENHANCED CORROSION RESISTANCE COATINGFOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.NOTES: 1. All strength values shown below are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limitPULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (3) (4) (3) (4) (3) (4) (3) (4) (1) (2) (4) (1) (2) (4)10-16/8 N/A N/A N/A 636 N/A 441 N/A 368 N/A 210 N/A 713 1526 N/A 466 1216 N/A#12-14 STITCH N/A N/A N/A N/A N/A N/A 297 N/A 329 N/A 217 N/A N/A 495 N/A N/A 162TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH10-16/8 MICRO-BIT .210/.191 .121/116 .500” NOM .312” 1585*** LBS. 60 IN.-LBS. 1574 LBS.#12-14 STITCH MICRO-BIT .215/.209 .160/.153 .500” NOM .312” 2900 LBS.* 88 IN.-LBS. 1962 LBS.• Designed to fasten steel roong to wood purlins used in post-frame construction, plywood or OSB used in residential construction.• 5/16” cupped HWH with a molded ZAMAC 5 Zinc-Aluminum alloy provides lifetime protection against red rust on the head & washer. The ZAMAC 5 alloy provides more strength than more common ZAMAC 3 alloy. (You may obtain a free copy of the written warranty upon request.)• ZXL™ is an excellent choice for GALVALUME & other long-life metal roof panels.• Threads transition from ne to coarse to generate superior holding strength in various wood substrates.• Micro-Bit point reduces metal shavings that can embed themselves in the rubber washer. The combination of the Micro-Bit point & transition thread from ne to coarse generates superior drill speed in metal & holding strength in wood substrates.PULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .01410-16/8 (EPDM ONLY) 658 927 1035 1386 N/A N/A N/A#12-14 STITCH SD (EPDM ONLY)658 927 1035 1386 N/A N/A N/ASIZE HEAD STYLE CARTON QTY. WEIGHT/M10 x 1” 5/16” CHWH** 3000 12.710 x 1-1/2” 5/16” CHWH** 2500 14.710 x 2” 5/16” CHWH** 2000 17.010 x 2-1/2” 5/16” CHWH** 1500 19.210 x 3” 5/16” CHWH** 1000 21.012 x 3/4”STITCH 5/16” CHWH** 2500 9.0**CHWH-Cupped Hex Washer Head.*** Tabulated value is the force at which the ZXL head breaks from the carbon steel body.New Micro-Bit Engineering™MB™New Micro-Bit Engineering™MB™®MBZXL™™The Zinc-Aluminum alloy HWH prevents red rust from ever starting. ST Fastening Systems spring retainer sockets are designed to allow for the added thickness of the powder coat and are recommended.Powder Coated PaintZinc Aluminum Molded HeadEPDM Rubber SealNo Red-Rust Guaranteed!FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.(1) 1” PENETRATION(2) 1 1/2” PENETRATION(3) FULL PENETRATION(4) 1/2” PENETRATIONNOTES: 1. All strength values shown below are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limitARCHITECTURALSERIESARCHITECTURALSERIES?9METAL TO WOODIntroducingMinimizes PigtailsEliminates Slow or No DrillEasy Multi-LayerPenetrationNew Micro-Bit Engineering™MB™The #1 complaint regarding sharp point screws is that they often drill slowly or not at all. ST Fastening Systems has married its metal building fastener technology into its new KWIKSEAL® MB with micro-bit engineering. This KWIKSEAL MB will eliminate the slow drill or no drill complaint. The transition thread will still generate superior holding strength in all wood substrates. The point will generate small metal shavings & eliminate the long “pigtail” prevalent with sharp point screws. It all adds up to a cleaner, more consistent drill point.DuraS al Plus ® CORROSION RESISTANT COATINGFOR UNPAINTED FASTENERSStronger, More Consistent, Drill PointFOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER.IMPACT DRIVERPart# DescriptionCarton Qty Head Size SizeS1Zcc 1" WoodBinder Metal-to-Wood Screw 3000 5/16" #10 x 1"S15Zcc 1-1/2" WoodBinder Metal-to-Wood Screw 2500 5/16" #10 x 1-1/2"S2Zcc 2" WoodBinder Metal-to-Wood Screw 2000 5/16" #10 x 2"S25Zcc 2-1/2" WoodBinder Metal-to-Wood Screw 1500 5/16" #10 x 2-1/2"S3Zcc 3" WoodBinder Metal-to-Wood Screw 1000 5/16" #10 x 3"ZXL WoodBinder with 40-Year Warranty - ST Fastening SystemsIf your metal roong has a 40-year warranty, your screw should too. That’s the thinking behind the ZXL WoodBinder from ST Fastening Systems. The ZXL screw has a ⁄ zinc/aluminum molded head that oers lifetime protection against red rust. That means, even if the powder coating is chipped during installation, the screw is not going to cause rust streaks down the panel. Plus, the molded head covers the washer – protecting it from damaging UV rays. The ZXL screw is an excellent choice for any long-lasting Galvanized or Galvalume roof system.Sold in bags of 100 and by the carton. Color-matched colors in stock, with many more colors available for direct ship. Features • Designed to fasten steel roong plywood or OSB used in residential construction, and to wood purlins used in post-frame construction.• ⁄” cupped HWH with a molded ZAMAC 5 Zinc-Aluminum alloy provides lifetime protection against red rust on the head & washer. The ZAMAC 5 alloy provides more strength than more common ZAMAC 3 alloy. (You may obtain a free copy of the written warranty upon request.)• Threads transition from ne to coarse to generate superior holding strength in various wood substrates.• Micro-Bit point reduces metal shavings that can embed themselves in the rubber washer.METAL ROOFING FASTENERSMETAL ROOFING FASTENERSMetal Roong FastenersCC = Color Code * = Size29DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

™KS V-NECKPREVENTS TWIST OFFHEX WASHER HEAD?13METAL TO WOODNOTES: 1. *The tabulated value represents the ultimate tensile load at which the ZXL head breaks from the carbon steel fastener body. 2. 1-1/2” Length fully penetrates OSB and Plywood sheeting. 3. 26 and 29 GA values shown were obtained using 80 KSI steel sheeting. 24, 22, and 20 GA values were obtained using KSI minimum steel sheeting.PULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (1) (2) (1) (2) (1) (2) (1) (2) (1) (2) (1) (2)#12 TYPE 17 N/A N/A N/A 380 585 453 588 297 390 198 212 438 1090 378 739PULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 5/8” OSB 7/16” OSB 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (1) (2) (1) (2) (1) (2) (1) (2) (1) (2) (1) (2)#12 TYPE 17 N/A N/A N/A 380 585 453 588 297 390 361 441 198 212 378 739• OSB/Replacement Applications• Deep, forceful threads that will grip into the soft bers.• Color matched Powderful™ coating • KS V-Neck technology, Hex washer head • Strip-Loc Thread to Point technology • OSB/Replacement Applications• Deep, forceful threads that will grip into the soft bers.• Color matched Powderful™ coating • ZXL™ is an excellent choice for GALVALUME & other long-life metal roof panels. • Strip-Loc Thread to Point technology Strip-Loc thread to point technologygrips the ber of OSBStrip-Loc thread to point technologygrips the ber of OSB®#12 TYPE 17®ZXL #12 T-17™FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.TECHNICAL DATA PROVIDED HEREIN IS TO BE USED AS A GUIDE FOR TYPICAL STRENGTH CHARACTERISTICS ONLY. AN APPROPRIATE FACTOR OF SAFETY MUST BE APPLIED BY THE USER TO OBTAIN ALLOWABLE LIMITS FOR DESIGN. ALL STRENGTH VALUES SHOWN ARE ULTIMATE VALUES, EXPRESSED IN POUNDS. DUE TO THE INCONSISTENCY OF OSB, THE #12 OSB SCREW WAS DEVELOPED TO REDUCE STRIPOUT TO ENABLE FULL PULLOUT VALUES TO BE OBTAINED.FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.TECHNICAL DATA PROVIDED HEREIN IS TO BE USED AS A GUIDE FOR TYPICAL STRENGTH CHARACTERISTICS ONLY.DUE TO THE INCONSISTENCY OF OSB, THE #12 OSB SCREW WAS DEVELOPED TO REDUCE STRIPOUT TO ENABLE FULL PULLOUT VALUES TO BE OBTAINED.(1) 3/4” PENETRATION(2) 1 1/2” PENETRATIONSIZE HEAD STYLE CARTON QTY. WEIGHT/M#12 x 3/4” HEX 3000 8.0#12 x 1-1/2” HEX 2500 10.1SIZE HEAD STYLE CARTON QTY. WEIGHT/M#12 x 3/4” HEX 3000 8.0#12 x 1-1/2” HEX 2500 10.1PULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUMENOM. GAUGE29 26 24 22THICKNESS.015 .019 .024 .032#12 TYPE 17(EPDM WASHER ONLY)378 629 721 N/APULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUMENOM. GAUGE29 26 24 22THICKNESS.015 .019 .024 .032#12 TYPE 17(EPDM WASHER ONLY)658 927 1035 1386TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#12 TYPE 17 Sharp Point .215/.210 .130/.135 .348/.322 .250 NOM 2450 LBS. 65 IN.-LBS. 2100 LBS.TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#12 TYPE 17 Sharp Point .215/.210 .130/.135 .500 .305/.311 1575 LBS.* 65 IN.-LBS. 2100 LBS.BMT DENOTES BASE METAL THICKNESS AFTER REMOVAL OF PAINT FINISH AND METALLIC PROTECTIVE COATING. NOTES: 1-1 /2” LENGTH FULLY PENETRATES OSB AND PLYWOOD SHEETINGNOTES: 26 AND 29 GA. VALUES SHOWN WERE OBTAINED USING 80 KSI STEEL SHEETING. 24, 22, AND 20 GA. VALUES WERE OBTAINED USING 50 KSI MINIMUM STEEL SHEETING.KS V-NeckAnatomy of the KS V-neck weather tight systemZXLAnatomy of the ZXL weather tight systemBackyard ShedsResidentialResidentialRescue Screw with Anti-Strip Out TechnologyRescue Screw with Anti-Strip Out TechnologyPROUDLYASSEMBLED IN THEPROUDLYASSEMBLED IN THETHREAD 2 POINTTECHNOLOGY™ZXL™NO RED RUSTZAMAC DIE CAST HEADTHREAD 2 POINTTECHNOLOGY™POW ERFUL™CORROSION DEFENSEPOWDER COAT SYSTEMPOW ERFUL™CORROSION DEFENSEPOWDER COAT SYSTEMOSBTheScrewOSBTheScrew(1) 3/4” PENETRATION(2) 1 1/2” PENETRATIONWood to Metal™KS V-NECKPREVENTS TWIST OFFHEX WASHER HEAD?13METAL TO WOODNOTES: 1. *The tabulated value represents the ultimate tensile load at which the ZXL head breaks from the carbon steel fastener body. 2. 1-1/2” Length fully penetrates OSB and Plywood sheeting. 3. 26 and 29 GA values shown were obtained using 80 KSI steel sheeting. 24, 22, and 20 GA values were obtained using KSI minimum steel sheeting.PULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (1) (2) (1) (2) (1) (2) (1) (2) (1) (2) (1) (2)#12 TYPE 17 N/A N/A N/A 380 585 453 588 297 390 198 212 438 1090 378 739PULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 5/8” OSB 7/16” OSB 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (1) (2) (1) (2) (1) (2) (1) (2) (1) (2) (1) (2)#12 TYPE 17 N/A N/A N/A 380 585 453 588 297 390 361 441 198 212 378 739• OSB/Replacement Applications• Deep, forceful threads that will grip into the soft bers.• Color matched Powderful™ coating • KS V-Neck technology, Hex washer head • Strip-Loc Thread to Point technology • OSB/Replacement Applications• Deep, forceful threads that will grip into the soft bers.• Color matched Powderful™ coating • ZXL™ is an excellent choice for GALVALUME & other long-life metal roof panels. • Strip-Loc Thread to Point technology Strip-Loc thread to point technologygrips the ber of OSBStrip-Loc thread to point technologygrips the ber of OSB®#12 TYPE 17®ZXL #12 T-17™FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.TECHNICAL DATA PROVIDED HEREIN IS TO BE USED AS A GUIDE FOR TYPICAL STRENGTH CHARACTERISTICS ONLY. AN APPROPRIATE FACTOR OF SAFETY MUST BE APPLIED BY THE USER TO OBTAIN ALLOWABLE LIMITS FOR DESIGN. ALL STRENGTH VALUES SHOWN ARE ULTIMATE VALUES, EXPRESSED IN POUNDS. DUE TO THE INCONSISTENCY OF OSB, THE #12 OSB SCREW WAS DEVELOPED TO REDUCE STRIPOUT TO ENABLE FULL PULLOUT VALUES TO BE OBTAINED.FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.TECHNICAL DATA PROVIDED HEREIN IS TO BE USED AS A GUIDE FOR TYPICAL STRENGTH CHARACTERISTICS ONLY.DUE TO THE INCONSISTENCY OF OSB, THE #12 OSB SCREW WAS DEVELOPED TO REDUCE STRIPOUT TO ENABLE FULL PULLOUT VALUES TO BE OBTAINED.(1) 3/4” PENETRATION(2) 1 1/2” PENETRATIONSIZE HEAD STYLE CARTON QTY. WEIGHT/M#12 x 3/4” HEX 3000 8.0#12 x 1-1/2” HEX 2500 10.1SIZE HEAD STYLE CARTON QTY. WEIGHT/M#12 x 3/4” HEX 3000 8.0#12 x 1-1/2” HEX 2500 10.1PULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUMENOM. GAUGE29 26 24 22THICKNESS.015 .019 .024 .032#12 TYPE 17(EPDM WASHER ONLY)378 629 721 N/APULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUMENOM. GAUGE29 26 24 22THICKNESS.015 .019 .024 .032#12 TYPE 17(EPDM WASHER ONLY)658 927 1035 1386TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#12 TYPE 17 Sharp Point .215/.210 .130/.135 .348/.322 .250 NOM 2450 LBS. 65 IN.-LBS. 2100 LBS.TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#12 TYPE 17 Sharp Point .215/.210 .130/.135 .500 .305/.311 1575 LBS.* 65 IN.-LBS. 2100 LBS.BMT DENOTES BASE METAL THICKNESS AFTER REMOVAL OF PAINT FINISH AND METALLIC PROTECTIVE COATING. NOTES: 1-1 /2” LENGTH FULLY PENETRATES OSB AND PLYWOOD SHEETINGNOTES: 26 AND 29 GA. VALUES SHOWN WERE OBTAINED USING 80 KSI STEEL SHEETING. 24, 22, AND 20 GA. VALUES WERE OBTAINED USING 50 KSI MINIMUM STEEL SHEETING.KS V-NeckAnatomy of the KS V-neck weather tight systemZXLAnatomy of the ZXL weather tight systemBackyard ShedsResidentialResidentialRescue Screw with Anti-Strip Out TechnologyRescue Screw with Anti-Strip Out TechnologyPROUDLYASSEMBLED IN THEPROUDLYASSEMBLED IN THETHREAD 2 POINTTECHNOLOGY™ZXL™NO RED RUSTZAMAC DIE CAST HEADTHREAD 2 POINTTECHNOLOGY™POW ERFUL™CORROSION DEFENSEPOWDER COAT SYSTEMPOW ERFUL™CORROSION DEFENSEPOWDER COAT SYSTEMOSBTheScrewOSBTheScrew(1) 3/4” PENETRATION(2) 1 1/2” PENETRATIONWood to MetalFOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER.IMPACT DRIVERPart# DescriptionCarton Qty Head Size SizeSO34cc 3/4" OSB WoodBinder Metal-to-OSB Screw 2500 1/4" #12 x 3/4"SO34SO 3/4" OSB WoodBinder - Special Order Colors 2500 1/4" #12 x 3/4"SO15SO 1-1/2" OSB WoodBinder - Special Order Size 2500 1/4" #12 x 1-1/2"OSB WoodBinder - ST Fastening SystemsIf you are going to be fastening metal roong into soft OSB, ST Fastening Systems has developed a special WoodBinder with extra grip for better OSB performance.Sold in bags of 250. Stocked in ¾" Galvanized (GV), Black (BL), Brown (BN), Burgundy (BU), Bronze (BZ), Charcoal (CH), Clay (CL), Colonial Red (CR), Evergreen (EG), Forest Green (FG), Barn Red (RD), Slate Blue (SB), and Bright White (BW) with more colors and sizes available for special order. Features • Fastener designed to attach steel roong to OSB sheeting.• Powder Coated for exceptional corrosion resistance.• EPDM rubber is vulcanized to a steel washer to form an excellent seal even when driven at an angle.METAL ROOFING FASTENERSMETAL ROOFING FASTENERSMetal Roong Fasteners Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com30DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

™KS V-NECKPREVENTS TWIST OFFHEX WASHER HEAD?13METAL TO WOODNOTES: 1. *The tabulated value represents the ultimate tensile load at which the ZXL head breaks from the carbon steel fastener body.2. 1-1/2” Length fully penetrates OSB and Plywood sheeting.3. 26 and 29 GA values shown were obtained using 80 KSI steel sheeting. 24, 22, and 20 GA values were obtained using KSI minimum steel sheeting.PULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (1) (2) (1) (2) (1) (2) (1) (2) (1) (2) (1) (2)#12 TYPE 17 N/A N/A N/A 380 585 453 588 297 390 198 212 438 1090 378 739PULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 5/8” OSB 7/16” OSB 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (1) (2) (1) (2) (1) (2) (1) (2) (1) (2) (1) (2)#12 TYPE 17 N/A N/A N/A 380 585 453 588 297 390 361 441 198 212 378 739• OSB/Replacement Applications• Deep, forceful threads that will grip into the soft bers.• Color matched Powderful™ coating• KS V-Neck technology, Hex washer head• Strip-Loc Thread to Point technology • OSB/Replacement Applications• Deep, forceful threads that will grip into the soft bers.• Color matched Powderful™ coating• ZXL™ is an excellent choice for GALVALUME & other long-life metal roofpanels.• Strip-Loc Thread to Point technology Strip-Loc thread to point technologygrips the ber of OSBStrip-Loc thread to point technologygrips the ber of OSB®#12 TYPE 17®ZXL #12 T-17™FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.TECHNICAL DATA PROVIDED HEREIN IS TO BE USED AS A GUIDE FOR TYPICAL STRENGTH CHARACTERISTICS ONLY. AN APPROPRIATE FACTOR OF SAFETY MUST BE APPLIED BY THE USER TO OBTAIN ALLOWABLE LIMITS FOR DESIGN. ALL STRENGTH VALUES SHOWN ARE ULTIMATE VALUES, EXPRESSED IN POUNDS. DUE TO THE INCONSISTENCY OF OSB, THE #12 OSB SCREW WAS DEVELOPED TO REDUCE STRIPOUT TO ENABLE FULL PULLOUT VALUES TO BE OBTAINED.FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.TECHNICAL DATA PROVIDED HEREIN IS TO BE USED AS A GUIDE FOR TYPICAL STRENGTH CHARACTERISTICS ONLY.DUE TO THE INCONSISTENCY OF OSB, THE #12 OSB SCREW WAS DEVELOPED TO REDUCE STRIPOUT TO ENABLE FULL PULLOUT VALUES TO BE OBTAINED.(1) 3/4” PENETRATION(2) 1 1/2” PENETRATIONSIZE HEAD STYLE CARTON QTY. WEIGHT/M#12 x 3/4” HEX 3000 8.0#12 x 1-1/2” HEX 2500 10.1SIZE HEAD STYLE CARTON QTY. WEIGHT/M#12 x 1-1/2” HEX 2500 10.1PULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUMENOM. GAUGE29 26 24 22THICKNESS.015 .019 .024 .032#12 TYPE 17(EPDM WASHER ONLY)378 629 721 N/APULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUMENOM. GAUGE29 26 24 22THICKNESS.015 .019 .024 .032#12 TYPE 17(EPDM WASHER ONLY)658 927 1035 1386TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#12 TYPE 17 Sharp Point .215/.210 .130/.135 .348/.322 .250 NOM 2450 LBS. 65 IN.-LBS. 2100 LBS.TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#12 TYPE 17 Sharp Point .215/.210 .130/.135 .500 .305/.311 1575 LBS.* 65 IN.-LBS. 2100 LBS.BMT DENOTES BASE METAL THICKNESS AFTER REMOVAL OF PAINT FINISH AND METALLIC PROTECTIVE COATING. NOTES: 1-1 /2” LENGTH FULLY PENETRATES OSB AND PLYWOOD SHEETINGNOTES: 26 AND 29 GA. VALUES SHOWN WERE OBTAINED USING 80 KSI STEEL SHEETING. 24, 22, AND 20 GA. VALUES WERE OBTAINED USING 50 KSI MINIMUM STEEL SHEETING.KS V-NeckAnatomy of the KS V-neck weather tight systemZXLAnatomy of the ZXL weather tight systemBackyard ShedsResidentialResidentialRescue Screw with Anti-Strip Out TechnologyRescue Screw with Anti-Strip Out TechnologyPROUDLYASSEMBLED IN THEPROUDLYASSEMBLED IN THETHREAD 2 POINTTECHNOLOGY™ZXL™NO RED RUSTZAMAC DIE CAST HEADTHREAD 2 POINTTECHNOLOGY™POW ERFUL™CORROSION DEFENSEPOWDER COAT SYSTEMPOW ERFUL™CORROSION DEFENSEPOWDER COAT SYSTEMOSBTheScrewOSBTheScrew(1) 3/4” PENETRATION(2) 1 1/2” PENETRATIONWood to MetalMETAL ROOFING FASTENERSMETAL ROOFING FASTENERSMetal Roong FastenersCC = Color Code * = Size31DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

?15PULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (3) (4) (3) (4) (3) (4) (3) (4) (1) (2) (4) (1) (2) (4)#10 N/A N/A N/A 536 N/A 420 N/A 379 N/A 190 N/A 929 N/A N/A 640 N/A N/APULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (3) (4) (3) (4) (3) (4) (3) (4) (1) (2) (4) (1) (2) (4)#14-10 800 1250 2017 723 N/A 487 N/A 391 N/A 227 N/A 856 1669 N/A 594 1235 N/A• Round head with 6–lobe recess driver provides an aesthetic, low-prole appearance on sidewall metal applications installed into wood girts.• Micro-Bit™ point quickly penetrates steel siding and eliminates metal shaving that can embed themselves in the rubber washer. • Undercut EPDM rubber washer provides a secure seal even when driven at an angle. • T-25-W driver specially designed to t securely in the 6-lobe recess with no cam-out or paint damage.The Truss head is 50% lower than a standard HWH & provides a very aesthetic appearance.T-25-W DriverMicro-Bit point is designed to penetrate steel quickly wit no “point walking.”®MBECLIPSEROLLING CHANGEThe new Micro-Bit will completely replace the Type 17 sharp point as current inventories are depleted. Sizes listed in GREEN will continue to be sharp points, as inventory levels of those turn over at a slower rate. FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.6 LOBE(1) 1” PENETRATION(2) 1 1/2” PENETRATION(3) FULL PENETRATION(4) 1/2” PENETRATIONNOTES: All strength values shown below are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.• Designed to be used as a “rescue screw”. This fastener will replace nails or smaller diameter fasteners that have loosened & backed out of steel roong over time.• 5/16” HWH with bonded sealing washer will completely cover existing hole, even if elongated by movement in the metal roof. • Type 17 point will help clean the existing hole so that oversized threads can tap & generate maximum holding strength.• EPDM rubber is vulcanized to the steel washer to prevent delamination & form an excellent seal even when driven at an angle.WEIGHT/MHex Washer Head with EPDM rubber will completely cover the existing hole to provide a watertight seal.The Type 17 point will clean the existing hole of metal burrs & the oversized threads will generate increased holding strength.®#14 TYPE 17FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.(1) 1” PENETRATION(2) 1 1/2” PENETRATION(3) FULL PENETRATION(4) 1/2” PENETRATIONSIZE HEAD STYLE CARTON QTY. WEIGHT/M10 x 1” TRUSS 3000 8.010 x 1-1/2” TRUSS 2500 10.110 x 2” TRUSS 2000 12.210 x 2-1/2” TRUSS 1500 15.410 x 3” TRUSS 1000 17.2SIZE HEAD STYLE CARTON QTY. WEIGHT/M14 x 1” 5/16” HWH 2000 13.014 X 1-1/4” 5/16” HWH 2000 15.714 x 1-1/2” 5/16” HWH 1500 17.714 x 2” 5/16” HWH 1500 22.314 x 2-1/2” 5/16” HWH 1000 26.7PULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#10 (EPDM WASHER ONLY)688 879 N/A N/A N/A N/A N/APULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#14 -10 (14MM O.D. BONDED WASHER)495 780 1078 1355 1608 N/A N/A#14-10 (W/ NO WASHER)N/A 722 1040 1197 1419 N/A N/ATECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#10 MICRO-BIT .206/.200 .126/.122 .500 N/A 2023 LBS. 75 IN.-LBS. 1653 LBS.TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#14-10 30º SHARP POINT T-17 .254/.248 .185/.178 .398/.432 NOM .312” 4270 LBS. 125 IN.-LBS. 2997 LBS.®MICRO-BITSELF DRILL POINTMBWood to MetalFOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER.IMPACT DRIVERPart# DescriptionCarton Qty Head Size SizeS14**SO #14 Special Order Color ScrewsS1434 3/4" #14 Galvanized Metal-to-Wood Screws 5/16" #14 x 3/4"S141 1" #14 Galvanized Metal-to-Wood Screws 2000 5/16" #14 x 1”S1415 1-1/2" #14 Galvanized Metal-to-Wood Screws 1500 5/16" #14 x 1-1/2”S142 2" #14 Galvanized Metal-to-Wood Screws 2500 5/16" # 14 x 2”S1425 2-1/2" #14 Galvanized Metal-to-Wood Screws 1000 5/16" #14 x 2-1/2"#14 WoodBinder Nail-Replacement - ST Fastening SystemsDesigned to be used as a “rescue screw”. This fastener will replace nails or smaller diameter fasteners that have loosened & backed out of steel roong over time.Features • ⁄” HWH with bonded sealing washer will completely cover existing hole, even if elongated by movement in the metal roof.• Type 17 point will help clean the existing hole so that oversized threads can tap & generate maximum holding strength.• EPDM rubber is vulcanized to the steel washer to prevent delamination & form an excellent seal even when driven at an angle.• Sold in 100/count bags and cartons.• Stocked in Galvanized with special order colors available.METAL ROOFING FASTENERSMETAL ROOFING FASTENERSMetal Roong Fasteners Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com32DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER.IMPACT DRIVERPart# DescriptionCarton Qty Head Size SizeSNR15cc 1-1/2" Nail Replacement Screw 2500 5/16" #12 x 1-1/2"SNR2cc 2" Nail Replacement Screw 1500 5/16" #12 x 2"SNR25cc 2-1/2" Nail Replacement Screw 1000 5/16" #12 x 2-1/2"SSNR15 1-1/2" Nail Replacement Screw - Stainless 2500 5/16" #12 x 1-1/2"SSNR2 2" Nail Replacement Screw - Stainless 1500 5/16" #12 x 2"SSNR25 2-1/2" Nail Replacement Screw - Stainless 1000 5/16" #12 x 2-1/2"Nail Replacement Screw - Levi's Building ComponentsChoose from mechanical galvanized or stainless steel options in 1-½”, 2” or 2-½” sizes when looking to replace nails or screws that have failed. The sharp point drills easily and oversized ⁄” EPDM washer seals tightly. Fasten aluminum panels eortlessly using the SS screw. Stocked in Galvanized in all sizes. Stocked in 1.5" and 2" in Black (BL), Brown (BN), Burgundy (BU), Bronze (BZ), Charcoal (CH), Clay (CL), Colonial Red (CR), Evergreen (EG), Barn Red (RD), Slate Blue (SB), and White (WH). More special order colors and sizes available for specail order.Features • Mechanical Galvanized in Colors or Bare Stainless Steel• EPDM washer ⁄" OD• Replace failing nails or screws• Ask about in-stock colors for quick shipmentMETAL ROOFING FASTENERSMETAL ROOFING FASTENERSMetal Roong FastenersCC = Color Code * = Size33DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

PULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (3) (4) (3) (4) (3) (4) (3) (4) (1) (2) (4) (1) (2) (4)#10 N/A N/A N/A 616 N/A 473 N/A 312 N/A 208 N/A 802 1176 N/A 678 913 N/APULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (3) (4) (3) (4) (3) (4) (3) (4) (1) (2) (4) (1) (2) (4)#9 N/A N/A N/A 668 N/A 384 N/A 242 N/A 224 N/A 852 1030 N/A 604 855 N /A#12-14 STITCH N/A N/A N/A N/A 260 N/A 233 N/A 202 N/A 164 N/A N/A 331 N/A N/A 237METAL TO WOOD?1414?14• 304 Stainless Steel cupped head & washer provide lifetime protection in the harshest environments. You may obtain a free copy of the written warranty upon request.• 304 SS™ Woodbinder® is an excellent choice for use in animal connement applications or for aluminum liner panel applications.• Type A point necessitates a pre-drilled hole in steel, but not aluminum.NOTES: All strength values shown are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.The Type A point will tap a predrilled hole in steel but will self-drill through aluminum liner panels.304 Stainless SteelEPDM Rubber Seal®SSFOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.THE USE OF 304 SS SCREWS MAY CAUSE BLISTERING ON ALUMINUM PANELS DUE TO THE MANY DIFFERENT ALLOYS FOUND. CHECK WITH THE ALUMINUM PANEL SUPPLIER FOR PROPER FASTENER RECOMMENDATION.(1) 1” PENETRATION(2) 1 1/2” PENETRATION(3) FULL PENETRATION(4) 1/2” PENETRATION• Designed as an alternative to the zinc-aluminum alloy head. It is also used to attach steel roong used in post-frame & residential construction. The smaller cupped HWH provides an attractive low-prole appearance versus larger HWH fasteners.• 304 Stainless Steel cap provides lifetime warranty against red rust on the head & washer. You may obtain a free copy of the written warranty upon request.• ST-XL™ is an excellent choice for GALVALUME or other long-life metal roofs.• The combination of a Micro-Bit™ drills 29 & 26 gauge consistently & eliminates the metal shavings that can embed themselves in the EPDM rubber washer.ST-XL has a 304 SS Cap on the head and washer. It will never red rust. Cupped head design provides low prole appearance.The Micro-Bit point is fully threaded to the end and is designed for the quickest penetration through light gauge steel panels.*CHWH-Cupped Hex Washer Head.304 Stainless Steel CapEPDM Rubber Seal®MBST-XLFOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS. THE USE OF 304 SS SCREWS MAY CAUSE BLISTERING ON ALUMINUM PANELS DUE TO THE MANY DIFFERENT ALLOYS FOUND. CHECK WITH THE ALUMINUM PANEL SUPPLIER FOR PROPER FASTENER RECOMMENDATION.(1) 1” PENETRATION(2) 1 1/2” PENETRATION(3) FULL PENETRATION(4) 1/2” PENETRATIONROLLING CHANGEThe new Micro-Bit will completely replace the Type 17 sharp point as current inventories are depleted. Sizes listed in GREEN will continue to be sharp points, as inventory levels of those turn over at a slower rate. SIZE HEAD STYLE CARTON QTY. WEIGHT/M10 x 1” 1/4” CHWH 3000 9.010 x 1-1/2” 1/4” CHWH 2500 11.910 x 2” 1/4” CHWH 2000 14.0SIZE HEAD STYLE CARTON QTY. WEIGHT/M9 x 1” 1/4” CHWH* 3000 9.09 x 1-1/2 ” 1/4” CHWH* 2500 11.99 x 2” 1/4” CHWH* 2000 14.09 x 2-1/2” 1/4” CHWH* 1500 16.09 x 3 ” 1/4” CHWH* 1000 18.412 x 3/4” STITCH 1/4” CHWH* 2500 16.0PULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#10 ( EPDM WASHER ONLY)683 870 N/A N/A N/A N/A N/APULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#9 (EPDM WASHER) 573 726 869 N/A N/A 380 N/A#12-14 STITCH (EPDM WASHER)378 629 721 N/A N/A N/A N/ATECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#10 30º SHARP POINT-A .183/.189 .126/.132 .500 NOM .250” 1135 LBS. 48 IN.-LBS. 1034 LBS.TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#9 MICRO-BIT .181/.178 .133/.127 .500 NOM .250” 2100 LBS. 48 IN.-LBS. 1800 LBS.#12-14 STITCH MICRO-BIT .215/.209 .164/.157 .500 NOM .250” 2900 LBS. 88 IN.-LBS. 1962 LBS.®MICRO-BITSELF DRILL POINTMBWood to Metal?14METAL TO WOODSIZE POINT STYLEHEAD STYLECARTON QTY.WEIGHT/M14 x 3/4” TYPE A 3/8” HWH 2500 16.514 x 1” TYPE A 3/8” HWH 2000 16.914 x 1-1/4” TYPE A 3/8” HWH 2000 17.614 x 1-1/2” TYPE A 3/8” HWH 1500 24.614 x 2” TYPE A 3/8” HWH 1500 26.014 x 2-1/2” TYPE A 3/8” HWH 1000 30.814 x 3” TYPE A 3/8” HWH 1000 35.9• Tapping screws that are designed to be used in wood or light gauge metal in a pre- drilled hole. See Fastener Selection Guide on page 1 for proper drill bit sizes.• Screws can be used as replacements for nails or screws that have loosened from wood or steel. • 3/8” HWH with EPDM bonded sealing washer provides maximum pull over strength in high wind uplift applications.• EPDM rubber & HWH with EPDM bonded washer is vulcanized to a steel washer to form an excellent seal & will cover any existing hole to prevent leaks from re- occurring.NOTES: For metal to metal tapping screws refer to page 7. TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#14-10 HWH TYPE A 30º SHARP POINT T-A .254/.248 .185/.178 0.500 NOM .375” 4270 LBS. 125 IN.-LBS. 2997 LBS.PULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#14-10 HWH TYPE A(16mm O.D. bonded washer)N/A 1001 1206 1649 N/A N/A N/APULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (3) (4) (3) (4) (3) (4) (3) (4) (1) (2) (4) (1) (2) (4)#14-10 HWH TYPE A 800 1250 2017 723 N/A 487 N/A 391 N/A 227 N/A 856 1669 N/A 594 1235 N/A®TAPPINGFOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.(1) 1” PENETRATION(2) 1 1/2” PENETRATION(3) FULL PENETRATION(4) 1/2” PENETRATIONNOTES: 1. HRS* (Hot Rolled Steel) 2.Pull over values calculated with EPDM rubber washer assembled to cupped head screw with .630” washer face. 3. All strength values shown are ultimate values, express in LBS. Apply an appropriate safety factor to obtain design limits. 4. ** Ultimate tensile strength value calculated at the point where the ZXL head breaks from the carbon steel body.• Type AB fasteners are designed to attach long-life roof panels such as GALVALUME that are used in pre-engineered metal building application. Type A fasteners are designed for use in wood framed buildings.• Fasteners are also used in retrot applications in which existing screws have stripped/backed out & need to be replaced with a larger diameter.• 5/16” Cupped HWH ZAMAC 5 Zinc-Aluminum Alloy provides lifetime protection against red rust on the head & washer face. The ZAMAC 5 alloy is stronger than the more common ZAMAC 3 alloy. A written warranty is available upon request.• The head and washer face captures the rubber EPDM washer even when driven at an angle and is designed to maximize pull over strength.The Type A is designed for wood. See Catalog page 1 for proper drill bit sizes.SIZE HEAD STYLE CARTON QTY. WEIGHT/M14-10 x 1-1/2” A 5/16” CHWH 1500 23.0TYPE AThe Zinc-Aluminum alloy HWH prevents red rust from ever starting. ST Fastening Systems spring retainer sockets are designed to allow for the added thickness of the powder coat and are recommended.TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#14-10 30º SHARP POINT .254/.248 .185/.178 0.580 NOM .312” 2240 LBS. 125 IN.-LBS. 2997 LBS.PULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#14-10 ( EPDM WASHER ONLY)886 1287 1572 2029 N/A N/A N/APULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4”PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (3) (4) (3) (4) (3) (4) (3) (4) (1) (2) (4) (1) (2) (4)#14-10 1181 1265 2143 707 N/A 554 N/A 391 N/A 238 N/A 828 1669 N/A 594 1235 N/A®ZXL TAPPING™Zinc Aluminum Molded HeadEPDM Rubber SealNo Red-Rust Guaranteed!FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.(1) 1” PENETRATION(2) 1 1/2” PENETRATION(3) FULL PENETRATION(4) 1/2” PENETRATIONMETAL ROOFING FASTENERSMETAL ROOFING FASTENERSMetal Roong Fasteners Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com34DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Part# DescriptionCarton Qty Drill Pt. Head SizeS1WHP 1" White Eclipse Pan Head Screws W/Washer 3000 Micro-bit Truss 1"S1WHPXW1" White Eclipse Pan Head Screws Withoutwasher 3000 Micro-bit Truss 1"S15WHP 1-1/2" White Eclipse Pan Head Screws W/Washer 2500 Micro-bit Truss 1-1/2"Eclipse Pan Head ScrewStocked in white with a washer for exterior applications and without a washer for interior applications. Uses a #25 Torx drive. Other colors available for direct ship.?13METAL TO WOOD• Round head with 6–lobe recess driver provides an aesthetic, low-prole appearance on sidewall metal applications installed into wood girts.• Micro-Bit™ point quickly penetrates steel siding and eliminates metal shaving that can embed themselves in the rubber washer. • Undercut EPDM rubber washer provides a secure seal even when driven at an angle. • T-25-W driver specially designed to t securely in the 6-lobe recess with no cam-out or paint damage.The Truss head is 50% lower than a standard HWH & provides a very aesthetic appearance.MIN. TORSIONALSTRENGTHNOMINAL TENSILESTRENGTHNOMINAL SHEARSTRENGTHSIZE HEAD STYLE CARTON QTY. WEIGHT/M10 x 1” TRUSS 3000 8.010 x 1-1/2” TRUSS 2500 10.110 x 2” TRUSS 2000 12.210 x 2-1/2” TRUSS 1500 15.410 x 3” TRUSS 1000 17.2T-25-W DriverTECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#10 MICRO-BIT .206/.200 .126/.122 .500 N/A 2023 LBS. 75 IN.-LBS. 1653 LBS.Micro-Bit point is designed to penetrate steel quickly wit no “point walking.”PULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#10 (EPDM WASHER ONLY)688 879 N/A N/A N/A N/A N/APULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (3) (4) (3) (4) (3) (4) (3) (4) (1) (2) (4) (1) (2) (4)#10 N/A N/A N/A 536 N/A 420 N/A 379 N/A 190 N/A 929 N/A N/A 640 N/A N/AMBECLIPSE™ ™®New Micro-Bit Engineering™MB™ROLLING CHANGEThe new Micro-Bit will completely replace the Type 17 sharp point as current inventories are depleted. Sizes listed in GREEN will continue to be sharp points, as inventory levels of those turn over at a slower rate. FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.6 LOBE(1) 1” PENETRATION(2) 1 1/2” PENETRATION(3) FULL PENETRATION(4) 1/2” PENETRATIONNOTES: All strength values shown below are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.• Designed to be used as a “rescue screw”. This fastener will replace nails or smaller diameter fasteners that have loosened & backed out of steel roong over time.• 5/16” HWH with bonded sealing washer will completely cover existing hole, even if elongated by movement in the metal roof. • Type 17 point will help clean the existing hole so that oversized threads can tap & generate maximum holding strength.• EPDM rubber is vulcanized to the steel washer to prevent delamination & form an excellent seal even when driven at an angle.WEIGHT/MHex Washer Head with EPDM rubber will completely cover the existing hole to provide a watertight seal.The Type 17 point will clean the existing hole of metal burrs & the oversized threads will generate increased holding strength.SIZE HEAD STYLE CARTON QTY. WEIGHT/M14 x 1” 5/16” HWH 2000 13.014 X 1-1/4” 5/16” HWH 2000 15.714 x 1-1/2” 5/16” HWH 1500 17.714 x 2” 5/16” HWH 1500 22.314 x 2-1/2” 5/16” HWH 1000 26.7®#14 TYPE 17TECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEADACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#14-10 30º SHARP POINT T-17 .254/.248 .185/.178 .398/.432 NOM .312” 4270 LBS. 125 IN.-LBS. 2997 LBS.PULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#14 -10 (14MM O.D. BONDED WASHER)495 780 1078 1355 1608 N/A N/A#14-10 (W/ NO WASHER)N/A 722 1040 1197 1419 N/A N/APULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (3) (4) (3) (4) (3) (4) (3) (4) (1) (2) (4) (1) (2) (4)#14-10 800 1250 2017 723 N/A 487 N/A 391 N/A 227 N/A 856 1669 N/A 594 1235 N/AFOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY & BASED UPON WOOD DENSITIES FOUND IN PRESENT DAY WOOD PRODUCTS.(1) 1” PENETRATION(2) 1 1/2” PENETRATION(3) FULL PENETRATION(4) 1/2” PENETRATIONMETAL ROOFING FASTENERSMETAL ROOFING FASTENERSMetal Roong FastenersCC = Color Code * = Size35DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

?5METAL TO METALTECHNICALINFORMATIONDRILLPOINT (DIA)MAJORDIAMETERMINORDIAMETERWASHERFACE DIAMETERHEADACROSS FLATSNOM. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#12 .181/.177 .215/.209 .164/.157 .630 NOM .312” 2240** LBS. 92 IN.-LBS. 1962 LBS.1/4” .156/.150 .246/.240 .192/.185 .630 NOM .312” 2240** LBS. 150 IN.-LBS. 2850 LBS.Drill point is designed to penetrate steel quickly with no “point walking”SIZE HEAD STYLE CARTON QTY. WEIGHT/M12-14 x 1” 5/16” CHWH** 2000 16.912-14 x 1-1/4” 5/16” CHWH** 2000 18.812-14 x 1-1/2” 5/16” CHWH** 2000 22.012-14 x 2” 5/16” CHWH** 1500 23.112-14 x 3” 5/16” CHWH** 1000 31.01/4-14 x 1-1/4” 5/16” CHWH** 1500 24.11/4-14 x 7/8” STITCH 5/16” CHWH** 2000 17.2**CHWH-Cupped Hex Washer Head.Powder Coated PaintZinc Aluminum Molded HeadEPDM Rubber SealThe Zinc-Aluminum alloy HWH prevents red rust from ever starting. ST Fastening Systems spring retainer sockets are recommended. ST Fastening Systems sockets are designed to allow for the added thickness of the powder coat.PULL OVER STRENGTHVALUE (LBS. ULT.)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#12 803 1091 1393 2159N/A N/A N/A1/4” 813 1436 1601 2037N/A N/A N/AZXL®™PULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY USING STEEL PANELS/FRAMING & WOOD DENSITIES WHOSE STRUCTURAL PROPERTIES ARE FOUND IN PRESENT DAY PRODUCTS.FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER.PULL OUTSTRENGTHVALUE(LBS. ULT.)MATERIALHRS PRIMED ONLY AZ55 GALVALUME G-90 GALVANIZED HRS. PLATENOM. GAUGE16 14 12 26 24 22 18 20 18 16 14 12 3/16” 1/4”THICKNESS.060 .075 .105 .018 .024 .030 .048 .036 .048 .060 .075 .105 .187 .250#12 927 958 1678 N/A N/A N/A N/A N/A 729 787 1041 1372 N/A N/A1/4” N/A N/A N/A 342 378 418 1038 620 N/A N/A N/A N/A N/A N/ADrill point is designed to penetrate steel quickly with no “point walking”SIZE HEAD STYLE CARTON QTY. WEIGHT/M12-14 x 3/4” 5/16” CHWH** 2500 11.312-14 x 1” 5/16” CHWH** 2500 13.212-14 x 1-1/4”* 5/16” CHWH** 2500 14.812-14 x 1-1/2” 5/16” CHWH** 2000 15.512-14 x 2” 5/16” CHWH** 1500 18.812-14 x 2-1/2” 5/16” CHWH** 1500 21.012-14 x 3” 5/16” CHWH** 1000 24.61/4-14 x 7/8” STITCH* 5/16” CHWH** 2500 13.4*Current sizes available with powder coating**CHWH-Cupped Hex Washer HeadTECHNICALINFORMATIONDRILLPOINT (DIA)MAJORDIAMETERMINORDIAMETERWASHERFACE DIAMETERHEADACROSS FLATSNOM. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#12 .181/.177 .215/.209 .164/.157 .560/.545 NOM .312” 2900 LBS. 92 IN.-LBS. 1962 LBS.1/4” STITCH .156/.150 .246/.240 .192/.185 .560/.545 NOM .312” 3800 LBS. 150 IN.-LBS. 2850 LBS.Cupped HWH head design improves Pull over strength versus standard HWH & Bonded Washer. ST Fastening Systems sockets are designed to allow for the added thickness of the powder coat.Powder Coated PaintZinc Plating andChromate SealerEPDM Rubber SealPULL OVER STRENGTHVALUE (LBS. ULT.)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#12 687 1090 1299 1562 N/A N/A N/A1/4” STITCH 746 960 1261 1376 N/A N/A N/AMAXX®™ALL UNPAINTED MAXX STEELBINDER® FASTENERS COME STANDARD WITH DURASEAL® PLUS ENHANCED CORROSION RESISTANCE COATING.FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER.PULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY USING STEEL PANELS/FRAMING & WOOD DENSITIES WHOSE STRUCTURAL PROPERTIES ARE FOUND IN PRESENT DAY PRODUCTS.PULL OUTSTRENGTHVALUE(LBS. ULT.)MATERIALHRS PRIMED ONLY AZ55 GALVALUME G-90 GALVANIZED HRS. PLATENOM. GAUGE16 14 12 26 24 22 18 20 18 16 14 12 3/16” 1/4”THICKNESS.060 .075 .105 .018 .024 .030 .048 .036 .048 .060 .075 .105 .187 .250#12 927 958 1678 N/A N/A N/A N/A N/A 729 787 1041 1372 N/A N/A1/4” STITCH N/A N/A N/A 342 378 418 1038 620 N/A N/A N/A N/A N/A N/A1. HRS (Hot Rolled Steel)2. Pull over values calculated with EPDM rubber washer assembled to cupped head screw with .555” washer face. 3. All strength values shown are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.NOTES:ARCHITECTURALSERIESARCHITECTURALSERIES1. HRS (Hot Rolled Steel)2. Pull over values calculated with EPDM rubber washer assembled to cupped head screw with .630” washer face.3. All strength values shown are ultimate values, express in LBS. Apply an appropriate safety factor to obtain design limits.4. ** Nominal tensile strength value calculated at the point where the ZXL head breaks from the carbon steel body. NOTES • Fastener designed to attach metal roof and sidewall panels used in pre-engineered metal building applications.• #12 Diameter 5/16” Cupped HWH self-drilling fastener easily penetrates steel up to .210” in thickness with no “point walking.” 1/4” Stitch will securely fasten 2 layers of 26 GA with no strip-out.• Cupped head & washer encapsulate EPDM rubber washer & provide a secure seal even when driven at an angle. • Fastener designed to attach long-life metal roof panels such as GALVALUME that are used in pre-engineered metal building applications.• 5/16” Cupped HWH ZAMAC 5 Zinc-Aluminum Alloy provides lifetime protection against red rust on the head. The ZAMAC 5 alloy provides more strength than the more common ZAMAC You may obtain a free copy of the written warranty upon request.• Washer face design helps to capture rubber EPDM washer even when driven at an angle.• #12 & 1/4” diameter drill point easily penetrates steel thickness up to .210” with no “point walking”. 1/4” Diameter Stitch securely fastens 2 layers of 26 GA with no strip-out.• Head & washer face are designed to maximize pull over strength.FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER.IMPACT DRIVERPart# DescriptionCarton Qty Head Size SizeSD34cc 3/4" Self-Drill Stitch Screw 2500 1/4" #12 x 3/4”SD78cc 7/8" Self-Drill Stitch Screw 2500 5/16" #12 x 7/8”SD1cc 1" SteelBinder Self-Dill Metal-to-Metal Screw 2500 5/16" #12 x 1”SD125cc 1-1/4" SteelBinder Self-Dill Metal-to-Metal Screw 2500 5/16" # 12 x 1-1/4”SD15cc 1-1/2" SteelBinder Self-Dill Metal-to-Metal Screw 2000 5/16" #12 x 1-1/2"SD2cc 2" SteelBinder Self-Dill Metal-to-Metal Screw 1500 5/16" #12 x 2"SD25cc 2-1/2" SteelBinder Self-Dill Metal-to-Metal Screw 1500 5/16" #12 x 2-1/2"SD3cc 3" SteelBinder Self-Dill Metal-to-Metal Screw 1000 5/16" #12 x 3"SteelBinder - ST Fastening SystemsFastener designed to attach metal roof and sidewall panels used in pre-engineered metal building applications.Features • #12 Diameter ⁄” Cupped HWH self-drilling fastener easily penetrates steel up to .210” in thickness with no “point walking.” ¼” Stitch will securely fasten 2 layers of 26 GA with no strip-out. • Cupped head & washer encapsulate EPDM rubber washer & provide a secure seal even when driven at an angle.• All unpainted maxx steelbinder® fasteners come standard with duraseal® plus enhanced corrosion resistance coating.METAL ROOFING FASTENERSMETAL ROOFING FASTENERSMetal Roong Fasteners Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com36DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

?10• Truss Head with 6–lobe recess driver provides an aesthetic, low-prole appearance on sidewall metal applications installed into metal girts.• Self-drilling point penetrates steel thickness up to .210” • Undercut EPDM rubber washer provides a secure seal even when driven at an angle.• T-30W driver is designed to t securely into the 6-lobe recess to prevent bit “cam- out.”NOTES: 1. *HRS (Hot Rolled Steel) 2. Pull over values calculated with EPDM rubber washer assembled to cupped head screw with .544” washer face. 3. All strength values shown are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limitsThe Truss head is 50% lower than a standard HWH & provides a very aesthetic appearance.®ECLIPSE6 LOBEFOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENERPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY USING STEEL PANELS/FRAMING & WOOD DENSITIES WHOSE STRUCTURAL PROPERTIES ARE FOUND IN PRESENT DAY PRODUCTS.NOTES: 1. *HRS (Hot Rolled Steel) 2. All values shown are ultimate values, expressed in LBS. Apply an appropriate safety factor to obtain design limits.• Self-drilling screws that are designed for general construction applications.• Drill points are designed to penetrate a wide variety of metal thicknesses. • Applications include HVAC, roof deck to steel framing, and roof clips to steel framing.#10 and 1/4” HWH are available with or without a bonded sealing washer. The #12 HWH is available only without a sealing washer. The #12 MAXX™ Steelbinder fastener is available for applications requiring a washer.®HWHPULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY USING STEEL PANELS/FRAMING & WOOD DENSITIES WHOSE STRUCTURAL PROPERTIES ARE FOUND IN PRESENT DAY PRODUCTS.Drill point is designed to penetrate steel quickly with no “point walking”T-30W DriverSIZE HEAD STYLE CARTON QTY. WEIGHT/M12-14” x 3/4” TRUSS 2500 10.712-14” x 1-1/4” TRUSS 2500 14.1 1/4”-14” x 7/8” STITCH TRUSS 2500 13.0SIZE HEAD STYLE CARTON QTY. WEIGHT/M8-18 x 1/2” 1/4” HWH 10000 3.68-18 x 5/8” w/Nibbs 1/4” HWH 10000 4.010-16 x 5/8” 5/16” HWH 5000 5.710-16 x 3/4” 5/16” HWH 2500 6.310-16 x 1” 5/16” HWH 2500 7.612-14 x 3/4” 5/16” HWH 2500 8.412-14 x 1” 5/16” HWH 2500 10.012-14 x 1-1/4” 5/16” HWH 2500 11.812-14 x 1-1/2” 5/16” HWH 2000 13.312-14 x 2” 5/16” HWH 1500 16.712-14 x 2-1/2” 5/16” HWH 1500 21.412-14 x 3” 5/16” HWH 1000 25.0SIZE HEAD STYLE CARTON QTY. WEIGHT/M1/4-14 x 7/8” Stitch 5/16” HWH 2500 8.81/4-14 x 3/4” 3/8” HWH 2500 12.51/4-14 x 1” 3/8” HWH 2500 15.21/4-14 x 1-1/4” 3/8” HWH 2000 17.51/4-14 x 1-1/2” 3/8” HWH 1500 19.61/4-14 x 2” 3/8” HWH 1000 23.81/4-14 x 2-1/2” 3/8” HWH 1000 30.01/4-14 x 3” 3/8” HWH 1000 33.21/4-14 x 4” 3/8” HWH 500 41.91/4-14 x 5” 3/8” HWH 500 50.71/4-14 x 6” 3/8” HWH 250 53.0 PULL OVER STRENGTHVALUE (LBS. ULT.)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#12 687 1090 1299 1562 N/A N/A N/A#14 746 960 1261 1376 N/A N/A N/APULL OVER STRENGTHVALUE (LBS. ULT.)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#14-14 (3/8” AF) BONDED WASHER (16mm)N/A 1001 1206 1649 N/A N/A N/A#12-14 (5/16” AF) BONDED WASHER (14mm)N/A 780 1078 1355 1608 N/A N/A#14-14 (5/16”AF) STITCH BONDED WASHER (14mm)N/A 892 1076 1243 1916 N/A N/ATECHNICALINFORMATIONDRILLPOINT (DIA)MAJORDIAMETERMINORDIAMETERWASHERFACE DIAMETERNOM. TENSILESTRENGTHULT. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#12 .180/.175 .215/.209 .164/.157 .544 T-30 6-Lobe Truss 2900 LBS. 92 IN-LBS. 1962 LBS.#14 .156/.150 .246/.240 .192/.185 .533/.551 T-30 6-Lobe Truss 3800 LBS. 150 IN-LBS. 2850 LBS.TECHNICALINFORMATIONDRILLPOINT (DIA)MAJORDIAMETERMINORDIAMETERWASHERFACE DIAMETERHEADACROSS FLATSNOM. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#1/4-14 (3/8” AF) .216/.210 .246/.240 .192/.185 .520/.480 NOM .375” 3697 LBS. 150 IN-LBS. 2682 LBS.#12-14 (5/16” AF) .180/.175 .215/.209 .164/.157 .432/.398 NOM .312” 2900 LBS. 92 IN-LBS. 1962 LBS.#1/4-14 (5/16” AF) .156/.150 .246/.240 .192/.185 .432/.398 NOM .312” 3697 LBS. 150 IN-LBS. 2682 LBS.PULL OUTSTRENGTHVALUE(LBS. ULT.)MATERIALHRS PRIMED ONLY AZ55 GALVALUME G-90 GALVANIZED HRS. PLATENOM. GAUGE16 14 12 26 24 22 18 20 18 16 14 12 3/16” 1/4”THICKNESS.060 .075 .105 .018 .024 .030 .048 .036 .048 .060 .075 .105 .187 .250#12 927 958 1678 N/A N/A N/A N/A N/A 729 787 1041 1372 N/A N/A#14 N/A N/A N/A 342 378 418 1038 620 1038 N/A N/A N/A N/A N/APULL OUTSTRENGTHVALUE(LBS. ULT.)MATERIALHRS PRIMED ONLY AZ55 GALVALUME G-90 GALVANIZED HRS. PLATENOM. GAUGE16 14 12 26 24 22 18 20 18 16 14 12 3/16” 1/4”THICKNESS.060 .075 .105 .018 .024 .030 .048 .036 .048 .060 .075 .105 .187 .250#14-14 (3/8” AF) 986 1070 2003 342 418 486 1038 620 868 890 1107 1327 N/A N/A#12-14 (5/16” AF) 927 958 1678 N/A N/A N/A N/A N/A 729 787 1041 1372 N/A N/A#14-14 (5/16”AF) 986 1070 2003 342 418 486 1038 620 868 890 1107 1327 N/A N/AMetal to MetalPart# DescriptionCarton Qty Head Size SizeSD1415GV 1-1/2" #14 Galvanized Metal-to-Metal Screws 1500 3/8" #14 x 1-1/2”SD142GV 2" #14 Galvanized Metal-to-Metal Screws 1000 3/8" #14 x 2”SD1425GV 2-1/2" #14 Galvanized Metal-to-Metal Screws 1000 3/8" #14 x 2-1/2”Part# DescriptionCarton Qty Head Size SizeSDNW34WH 3/4" #12 Galv. Metal-to-Metal Screws - White 3000 5/16" #12 x 3/4"SDNW1 1" #12 Galvanized Metal-to-Metal Screws 2500 5/16" #12 x 1”SDNW15 1-1/2" #12 Galvanized Metal-to-Metal Screws 2000 5/16" #12 x 1-1/2”SDNW2 2" #12 Galvanized Metal-to-Metal Screws 1500 5/16" #12 x 2”SDNW25 2-1/2" #12 Galvanized Metal-to-Metal Screws 1500 5/16" #12 x 2-1/2”SDNW3 3" #12 Galvanized Metal-to-Metal Screws 1000 5/16" #12 x 3”SDNW4 4" #14 Galvanized Metal-to-Metal Screws 500 3/8" #14 x 4”SDNW5 5" #14 Galvanized Metal-to-Metal Screws 500 3/8" #14 x 5”SDNW6 6" #14 Galvanized Metal-to-Metal Screws 500 3/8" #14 x 6”HWH SteelBinder with Washer - ST Fastening Systems HWH SteelBinder - ST Fastening SystemsSelf-drilling screws that are designed for general construction applicationsFeatures • Drill points are designed to penetrate a wide variety of metal thicknesses from thin sheet meal to 0.250".• Applications include HVAC, roof deck to steel framing, and roof clips to steel framing.• #10 and #14 HWH are available with or without a bonded sealing washer. The #12 HWH is available only without a sealing washer. The #12 MAXX® cupped head is available for applications requiring a washer.Self-drilling screws that are designed for general construction applicationsFeatures • Drill points are designed to penetrate a wide variety of metal thicknesses from thin sheet meal to 0.250".• Applications include HVAC, roof deck to steel framing, and roof clips to steel framing.METAL ROOFING FASTENERSMETAL ROOFING FASTENERSMetal Roong FastenersCC = Color Code * = Size37DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Part# DescriptionCarton Qty Drill Pt. Head Style SizeSPA1 1" Pancake Sharp Point Screw - Zinc Plated 5000 T-17 Phillips/Square #10 x 1"SPA15 1-1/2" Pancake Sharp Point Screw - Zinc Plated 2500 T-17 Phillips/Square #10 x 1-1/2"SPA2 2" Pancake Sharp Point Screw - Zinc Plated 2000 T-17 Phillips/Square #10 x 2"SDPA1 1" Pancake Self-Drill Screw - Zinc Plated 5000 SD Phillips/Square #10 x 1"SDPA15 1-1/2" Pancake Self-Drill Screw - Zinc Plated 2000 SD Phillips/Square #10 x 1-1/2"SDPA2 2" Pancake Self-Drill Screw - Zinc Plated 2000 SD Phillips/Square #10 x 2"SSPANC1 1" Pancake Sharp Point Screw - Stainless 5000 T-17 #2 Square #10 x 1"SSPANC151-1/2" Pancake Sharp Point Screw - Stainless 2000 T-17 #2 Square #10 x 1-1/2"SSPANC2 2" Pancake Sharp Point Screw - Stainless 2000 T-17 #2 Square #10 x 2"Pancake ScrewIdeal for fastening standing seam clips.SPA* SDPA* SSPA*METAL TO WOOD?1515SPECIALTY FASTENERS • CLIP SCREWS.SIZE HEAD STYLE CARTON QTY.WEIGHT/M10 x 1” PANCAKE TYPE 17 #2 SQUARE/PHILLIPS COMBO 3000 7.010 x 1-1/2” PANCAKE TYPE 17 #2 SQUARE/PHILLIPS COMBO 2500 9.010 x 1” PANCAKE TYPE 17 #2 SQUARE DRIVE HEAD 3000 7.010 x 1-1/2” PANCAKE TYPE 17 #2 SQUARE DRIVE HEAD 2500 9.010 x 2” PANCAKE TYPE 17 #2 SQUARE DRIVE HEAD 2000 10.210 x 1” WAFER SHARP POINT #2 SQUARE/PHILLIPS COMBO 3000 5.010 x 1-1/2” WAFER SHARP POINT #2 SQUARE/PHILLIPS COMBO 2500 7.010 x 2” WAFER SHARP POINT #2 SQUARE/PHILLIPS COMBO 2000 9.010 x 1” 304 SS SHARP POINT #2 SQUARE/PHILLIPS COMBO 3000 7.010 x 1-1/2” 304 SS SHARP POINT #2 SQUARE/PHILLIPS COMBO 2500 9.0• #10 Diameter is designed to attach standing seam roof clips to plywood, OSB, or wood purlins. • Low prole head design provides excellent pull over strength.• Thin Wafer Head is designed for standing seam panels that utilize no clip but require a very thin head so as not to dimple the roof panel.• Available in Ruspert® corrosion resistant coated carbon steel or 304 stainless steel• A self-drilling Pancake Head is available to attach standing seam roof clips to steel framing.• Low prole head design provides excellent pull over strength.• Ruspert® corrosion resistant coating is standard on all Clip Screws..PULL OUTSTRENGTH(LBS. ULT.)SUBSTRATEHRS PRIMED ONLY G-90 GALVANIZED16 14 12 18 20#10-16 PANCAKE SD 830 1006 1495 731PULL OVERSTRENGTHVALUE(LBS. ULT.)DESIGNATIONMATERIALAZ55 GALVALUMENOM. GAUGE29 26 24 22THICKNESS.015 .019 .024 .032#10-16 PANCAKE SD 529 779 1128 15122 driver bits to choose from.SIZE HEAD STYLE CARTON QTY.WEIGHT/M10 x 1” SD CARBON STL. #2 SQUARE/PHILLIPS Combo 3000 7.010 x 1-1/2” SD CARBON STL. #2 SQUARE/PHILLIPS Combo 2500 9.0ROOF PANELROOF PANELPANEL CLIP#10-12 PANCAKE HEADCLIP SCREWTYPICAL CLIP APPLICATIONTECHNICALINFORMATIONDRILLPOINTMAJORDIAMETERMINORDIAMETERWASHER/HEADDIAMETERHEAD ACROSS FLATSULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#10 PANCAKE TYPE 17 30º T-17 .204/.198 .128/.122 .447/.423 N/A 1981 LBS. 66 IN-LBS. 1428 LBS.#10 WAFER 30º SHARP POINT .204/.198 .128/.122 .447/.423 N/A 1981 LBS. 66 IN-LBS. 1428 LBS.#10 PANCAKE 304 SS 30º SHARP POINT .194/.188 .133/.126 .440 NOM. N/A 1450 LBS. 48 IN-LBS. 1113 LBS.TECHNICALINFORMATIONPOINTDIAMETERMAJORDIAMETERMINORDIAMETERHEADDIAMETERULT. TENSILESTRENGTHMIN. TORSIONALSTRENGTHNOM. SHEARSTRENGTH#10-16 PANCAKE SD .151/.156 .189/.183 .135/.141 .443/.423 1920 61 IN-LBS. 1633 LBS.®Metal to MetalPULL OUTSTRENGTHVALUE(LBS. ULT.)SUBSTRATEMATERIALHRS PRIMED ONLY3/4” PLY 5/8” PLY 1/2” PLY 7/16” OSB 2X Y.PINE 2X SPFNOM. GAUGE16 14 12THICKNESS.060 .075 .105 (3) (3) (3) (3) (2) (1) (2) (1)#10 PANCAKE T-17 N/A N/A N/A 684 435 352 218 N/A 868 N/A 597#10 WAFER N/A N/A N/A 684 435 352 218 N/A 868 N/A 597#10 PANCAKE 304 SS N/A N/A N/A 544 424 335 182 N/A 779 N/A 719PULL OVER STRENGTHVALUE (LBS. ULT.)(EPDM ONLY)DESIGNATIONMATERIALAZ55 GALVALUME G90 ALUMINUM SLOT EDGE PANELNOM. GAUGE29 26 24 22 20 21 29THICKNESS.014 .018 .024 .030 .036 .028 .014#10 PANCAKE T-17 529 779 1128 1512 N/A N/A N/A#10 WAFER N/A N/A N/A N/A N/A N/A 685#10 PANCAKE 304 SS 529 779 1128 1512 N/A N/A N/A(1) 1” PENETRATION(2) 1 1/2” PENETRATION(3) FULL PENETRATION(4) 1/2” PENETRATIONMETAL ROOFING FASTENERSMETAL ROOFING FASTENERSMetal Roong Fasteners Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com38DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Part# DescriptionPackage Qty Head Size LengthNTRcc 1-1/4" Stainless Steel Trim Nails 1 lb (Approx. 620) 3/16" 1-1/4"Part# DescriptionPackage Qty Size LengthSZIPcc 1/2" Zip Screws 100 #7 1/2"Stainless Steel Trim NailsStainless Steel Zip ScrewsFeatures • Type 204 Cu Stainless Steel for better corrosion resistance• Color-matched to our metal roong colors• Plain 15 gauge shank• Made in the USAStocked Colors: Ash Gray, Pebble Beige, Black, Brown, Burgundy, Bronze, Charcoal, Clay, Copper Penny, Colonial Red, Barn Red, Dark Blue, Evergreen/Forest Green, Gallery Blue, Lightstone (Almond), Patina Green, Pewter Gray, Barn Red, Slate Blue, Tan, and Bright White. Also stocking 14 Gauge Copper Trim Nails.Stocked #7 Colors: Bright White, Ash Gray, Avocado Green, Brown, Beige, Matte Black, Bright Red/Scarlet Red, Burgundy, Bone White, Classic Green/Evergreen, Charcoal, Clay, Copper Penny, Colonial Red, Dark Blue, Gallery Blue, Hawaiian Blue/Slate Blue, Hartford Green, Dark Bronze/Bronze, Light Stone, Mansard Brown, Medium Bronze, Musket Gray, Patina Green, Barn Red, Slate Gray, Sierra Tan, and Tan. Also stocked in #8 Brass, and #10 Mill Finish Stainless and Bright White.METAL ROOFING FASTENERSMETAL ROOFING FASTENERSMetal Roong FastenersCC = Color Code * = Size39

Part# DescriptionPackage Qty Head Size LengthABSPRB 1/8" - 3/16" Stainless Steel Pop Rivets100/Bag100 bags/Box3/16 1-1/2"ABSPRPcc 1/8" - 3/16" Painted Stainless Steel Pop Rivets100/Bag100 bags/Box3/16 1-1/2"ABSPRB42 1/8" - 1/8" #42 Stainless Steel Pop Rivets 100/Bag 3/16 1-1/2"ABSPRB48 3/8" - 1/2" #48 Stainless Steel Pop Rivets 100/Bag 3/16 2"Stainless Steel Pop RivetsFeatures • Color-matched to our ABSeam Panel metal roong colors• Pre-drill with ⁄" Drill Bit• Made in the USAFeatures • Pull Force: 2,000 lbs • Stroke Length: 0.8"• Rivet Sizes: ⁄" – ⁄"• Rivet Material: Aluminum, Steel & Stainless Steel • Nose Pieces: ⁄", ⁄, ⁄", & ⁄• Height/Width10.75" /2.63" • Length without mandrel collector 6.5" • Weight (w/ battery): 4.54 lbs Features • Short ratchet action power stroke• Lightweight, compact size and slim nose projection• Four rivet nosepieces (⁄-inch, ⁄-inch, ⁄-inch and ⁄-inch) • Ideally suited for blind riveting applications in aluminum windows, gutter and downspout• Spring return handles and comfortable contour grip Stocked Colors: Stainless Steel, Matte Black, Brown, Bright Red, Burgundy, Classic Green, Charcoal, Copper Penny, Colonial Red, Dark Bronze, Gallery Blue, Hawaiian Blue, Hartford Green, Mansard Brown, Medium Bronze, Musket Gray, Slate Gray, Sierra Tan, and White.ABSPRPCCABSPRB48ABSPRB42ABSPRBCopper Pop RivetsHand Pop Riveter - MalcoM12 Rivet Tool - MilwaukeeHCPR Copper Pop Rivets100/Bag10 bags/Box1-1/2”Part# Description Package Qty SizeTOCR18 Hand Pop Riveter MalcoPart# DescriptionY2550-22 M12 Rivet Tool Kit with 2 Batteries and Charger 3/32" - 3/16"Y2550-20 M12 Rivet Tool - Tool Only 3/32" - 3/16"Part# Description CapacityAluminum Pop RivetsKPRW White Pop Rivets - Aluminum 1-1/2” 100KPRB Brown Pop Rivets - Aluminum 1-1/2” 100Part# Description Size Pack Qt.METAL ROOFING FASTENERSMETAL ROOFING FASTENERSMetal Roong Fasteners Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com40

CAULKS & SEALANTS

PPRROODDUUCCTT DDAATTAA SSHHEEEETT SOLVENT TECHNOLOGY CCoommppoossiittiioonn aanndd MMaatteerriiaallss:: 2300 Sealant is based on a proprietary formulation of polymers designed to provide optimum flexibility, adhesion, weather resistance, and durability. 2300 Sealant retains its flexibility due to absence of plasticizers, which tend to migrate out causing hardening and reduced durability. Due to the mild solvent blend contained in the sealant, 2300 Sealant is not a flammable liquid according to NFPA liquid guidelines. It is weather and UV resistant. Its clear formulation is literally clear as glass from the moment of application. GGrraaddee:: Gun-grade consistency PPrriimmeerr:: Not required on most surfaces. If primerless adhesion to a particular surface substrate is a question, a test application is recommended. Contact our Technical Service Department for further information. LLiimmiittaattiioonnss:: •Do not use on traffic-bearing surfaces• Do not use on extrudedpolystyrene insulatingsheathing (foam board,etc.)• Do not use on acrylicskylight glazing surfaces• Do not use in areaswhere food is stored orprocessed•For exterior use only due to odor emitted duringcure• Do not use for portablewater applications2300® Construction Tripolymer Sealant 2300® Construction Tripolymer Sealant is a single component, high-performance elastomeric sealant for use in a wide variety of roofing, trim, architectural, metal, manufacturing, underdeck system, solar roof system, and general construction applications. •Will not crack• Asphalt shingle compatible• Exceptional elongation and flexibility• Excellent adhesion to many building surfaces, even when damp• UV resistant• Resealable, may be applied over itself• Paintable• Easily applied, non-stringing formulation• Available in crystal clear, colors, and specially designed metal roofcolors• Cured selant is mildew resistantBBaassiicc UUsseess:: •Most non-traffic-bearing joints, including those where structuralmovement or stress is expected.• Primerless application to brick, concrete, metal, glass, treatedand untreated wood, asphaltic materials, and vinyl.• Where UV resistant material is required.• Where a paintable sealant is required.• As a trim sealant for metal components.AAddhheerreess TToo:: Asphalt shingles, modified bitumen, coated steel (Kynar 500® based finishes), concrete, vinyl, steel, and other common building substrates Part# DescriptionCase Qty Tube Size2300cc 2300 Geocel Caulking Varies 10.3 oz2300ccP 2300 Geocel Caulking in Plastic Tubes 24 Tubes 10.3 ozCAULKS & SEALANTSCAULKS & SEALANTSCaulks & Sealants Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com42DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Part# DescriptionCase Qty Can Size2315G 2315LRF Leak Repair-Fibered Brushable Coating 4 Cans Gallon2315Q 2315LRF Leak Repair-Fibered Brushable Coating 6 Cans Quart2315LRF® Leak Repair-Fibered Brushable Coating - Geocel2315LRF® Leak Repair-Fibered Brushable Sealant is a single-component, elastic sealant with rubber-like exibility for small area use. It is an ideal solution to stop roof leaks fast, even in damp conditions. Features • Stops leaks fast• Fibered for strength• Will function in UV, heat, and intermittent foot trac• Withstands water contact quickly after application to stop leaks• One-step application with no primer required• Applies in adverse temperature ranges, including damp and icy conditions• Cured sealant is mildew resistant• Repairs small areas on slate, tile, shingles, and asphalt roofs• Exhibits adhesion to many roong materials, including damp, oily, or slightly dirty surfacesFor Use On• Asphalt shingles, coated steel (Kynar 500® based nishes), concrete, steel, vinyl, and other common building substrates.Limitations: Do not use on polystyrene insulation sheathing or EPDM. Do not use in areas where food is processed or stored. Do not use as a complete surface coating or in continuous underwater applications. For exterior use only due to odor emitted during cure. Product contains solvents which may craze some plastic materials or discolor some light colored asphalt materials. Do not use for potable water applications.Part# DescriptionCase Qty Size2310G 2310 Tripolymer Brushable Repair Coating Clear 4 Cans Gallon2310Q 2310 Tripolymer Brushable Repair Coating Clear 6 Cans Quart2310® Tripolymer Brushable Repair Coating - Geocel2310® Tripolymer Brushable Repair Coating is a single-component, brushable elastic coating with rubber-like exibility for small area use in many construction, roong, manufacturing, and industrial applications.Features • Exhibits adhesion to many common construction materials including damp, oily, or dirty surfaces• Withstands water contact quickly after application to stop leaks• Prevents rust on metal surfaces• Cured coating is mildew resistant• Paintable• Crystal clear• Resealable• Applies in adverse weather• Stays exible• Lever-lock lids on 3-gallon pailsFor Use On• Ashphalt shingles, coated steel (Kynar 500® based nishes), concrete, steel, vinyl, and other common building substrates.Limitations: Do not use on trac-bearing surfaces. Do not use on polystyrene insulation sheathing or EPDM. Do not use in areas where food is processed or stored. Product contains solvents that may craze some plastic materials. Do not use as a complete surface coating or in continuous underwater applications. For exterior use only due to odor emitted during cure. Do not use for potable water applications.CAULKS & SEALANTSCAULKS & SEALANTSCaulks & SealantsCC = Color Code * = Size43DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Part# DescriptionCase Qty Tube Size2320cc 2320 Tripolymer Narrow Seam Sealant - Clear 24 Tubes 10.3 ozTECHNICAL DATA 2320® /2321® Construction Tripolymer Gutter and Narrow Seam Sealant1. PRODUCT NAME:2320® /2321® Construction Tripolymer Gutterand Narrow Seam Sealant2. MANUFACTURER:Geocel Products Group A Business Unit of TheSherwin-Williams Company (“Geocel ProductsGroup”) Cleveland, OH 44115 Phone: (800)Fax: (800) 348-7009www.GeocelUSA.com3. PRODUCT DESCRIPTION:2320®/2321® Gutter and Narrow Seam Sealantis a single component, semi-self-leveling, high-performance tripolymer sealant designed toprevent the passage of air and moisture throughsmall joints or seams.Product Benefits: • Excellent adhesion to many building surfaces, even whendamp or oily• UV resistant• Paintable• Semi-self- leveling• Cleans up easily• Asphalt shingle componentBasic Uses: For sealing aluminum, galvanized and vinyl-clad gutters, end caps, and downspouts. It is also recommended for lap joints, storm windows, metal awnings, vents, flashing, side corner joints, and thresholds when a small joint sealant is required.Adheres to: Asphalt shingles, brick (masonry), concrete, glass, vinyl, wood, sheet metal, and other common building substrates. Composition and Materials: 2320/2321 Sealant is based on a proprietary tripolymer formulation. This formula produces a product with exceptional adhesion and UV resistance.Grade: Semi-self-leveling consistencyPrimer: Not required on most surfaces. If primerless adhesion to a particular surface substrate is a question, a test application is recommended. Contact our Technical Service Department for further information.Packaging: 2320-10.3 fl. oz.cartridge; 2321-5 fl. oz. squeeze tube Colors: White, aluminum, gray, and clearLimitations:• Do not use on joints larger than 1/4” x 1/4”.• Do not use on traffic-bearing surfaces. Do not use incontact with Styrofoam®• Do not use on traffic bearing surfaces• Do not use for portable water applications• Do not use where food is stored or processed4. INSTALLATION:Surface Preparation: For best results, 2320/2321 Sealant should be applied to a clean, dry surface which is free of foreign matter. When resealing over old existing sealant, remove sealant before applying 2320/2321 SealantElongation: 900%Tack Free: 15 minutesCure: 5 daysApplication and Tooling: 2320/2321 Sealant may beapplied at any working temperature. When temperature isbelow 40° F (4° C), application of sealant will be easier ifsealant is warmed. Level or remove excess sealant with wettooling stick or knife.To seal gutter lap joints, apply bead of sealant along inside edge of all joints and around rivets. When rivets are not used on lap joints, apply adequate sealant between 4” overlap to ensure full contact between both surfaces.To seal gutter end caps and slip joints, apply liberal amounts of sealant to these surfaces before the use of rivets.Painting: 2320/2321 Gutter and Narrow Seam Sealant maybe painted in 24 hours with latex or most oil-based paints.Cleaning: Remove 2320/2321Sealant from gun and toolsbefore it cures. This may be done by scraping and use ofsolvents such as MEK (lacquer thinner), Xylol, or chlorinated solvents. Observe manufacturer’s precautions when using toxic or flammable solvents. Cured materials may beremoved by cutting with sharp tools.Storage Life: 18 monthsCautions: CONTAINS VOLATILE ORGANIC COMPOUNDS. VAPOR HARMFUL Use only with adequateventilation. To avoid overexposure, open windows and doorsor use other means to ensure fresh air entry during application and drying. If you experience eye watering,headaches, or dizziness, increase fresh air, or wearrespiratory protection (NOISH approved) or leave the area.Avoid contact with eyes and skin. Wash hands after using.Keep container closed when not in use. Do not transfercontents to other containers for storage.First Aid: In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention.For skin contact, wash thoroughly with soap and water. Incase of respiratory difficulty, provide fresh air and callphysician. If swallowed, call Poison Control Center, hospitalCAULKS & SEALANTSCAULKS & SEALANTSCaulks & Sealants Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com44DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Part# DescriptionCase Qty Tube Size4350WH 4350 Geocel Caulking No Solvent Moisture Cure - White 24 Tubes 10 oz4350BL 4350 Geocel Caulking No Solvent Moisture Cure - Black 24 Tubes 10 oz4350CH 4350 Geocel Caulking No Solvent Moisture Cure - Charcoal 24 Tubes 10 oz4350BN 4350 Geocel Caulking No Solvent Moisture Cure - Brown 24 Tubes 10 oz4350BZ 4350 Geocel Caulking No Solvent Moisture Cure - Bronze 24 Tubes 10 oz4350™ Metal Roof and Siding Construction Sealant - GeocelGeocel 4350™ provides a strong, long lasting bond to PVDF, SMP, and polyester coated steel, bare galvanized, Galvalume® metal panels, aluminum, copper, skylights, glass, brick, block, wood and vinyl siding. Stay exible and can be applied in extreme wet or dry conditions, even down to 0 degrees F.Features • Long lasting watertight seal- won’t shrink• Permanently exible- exceeds rigorous ASTM C-920 Class 50 testing• Apply in wet or dry in challenging weather conditions down to 0 degrees F.• Strong lasting bondFor Use On• PVDF, SMP, and polyester coated steel, bare galvanized, Galvalume® metal panels, Aluminum, Copper, Skylights, Glass, Brick and block, Wood, Vinyl siding, and Asphalt shinglesLimitations: Not suitable for potable water applications or food preparation areasOther colors coming soon. Subject to availability.CAULKS & SEALANTSCAULKS & SEALANTSCaulks & SealantsCC = Color Code * = Size45DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Part# DescriptionCase Qty Size4525 4525 Pitch Pan & Repair Semi Self Leveling Sealant - Black 4 Pouches 64 oz4525™ Semi-Self-Leveling Sealant - Geocel4525™ Semi-self-leveling Sealant is a hybrid sealant that requires no mixing and can be used in damp or dry conditions. Simply pour it in place and it cures to form a weather resistant, durable seal for pitch pans and roof repair applications.Features • Use in pitch pan or pocket applications or roof repair• Can be applied in damp or dry conditions• No priming required on most substrates• Semi-self-leveling• One-part, no mixing• Compatible with Geocel 4500® Roof Bonding Sealant and Geocel Pro Fit® Pocket• Stays exible• Will not distort due to weather, stress, water, movement, or aging• Adheres to many common building substrates including EPDM, primed TPO, primed PVC, metal, asphalt shingles, and concreteFor Use On• Black EPDM, primed TPO, primed PVC, many metals, asphalt shingles, concrete, and many other common building substratesLimitations: Do not use on unprimed TPO or PVC. Do not use for broad applications on PVC. Do not use in areas where food is processed or stored. Not suitable for potable water applications. Part# DescriptionCase Qty Tube Size4500BL 4500 Geocel Bonding Sealant - Black 24 Tubes 10 oz4500WH 4500 Geocel Bonding Sealant - White 24 Tubes 10 oz4500® Roof Bonding Sealant - GeocelGeocel 4500® Roof Bonding Sealant is a premium Scypolymer® one-component, proprietary bonding sealant specically designed for roong applications and systems. The advanced technology of Geocel 4500® Roof Bonding Sealant results in a product that quickly withstands ponding water while bonding to many common roong substrates. Features • Applies, adheres, and cures underwater• 2 products in 1 - lap adhesive & scrim edge sealant• No additional adhesives or sealants needed• Remains exible• Works with EPDM membranes, tapes, and patches• Can also be used as a night seal and for core/test cuts• Non-ammable formulationFor Use On• Asphalt shingles, steel, concrete, EPDM, primed TPO, primed PVC, Hypalon (black only), metal, wood, and other common building substrates.Limitations: Do not use on unprimed TPO or PVC membranes. Do not use black Geocel 4500 Roof Sealant on white EPDM. Do not use white Geocel 4500 Roof Sealant on black EPDM. Do not use for potable water applications. Do not use in areas where food is processed or stored. DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYCAULKS & SEALANTSCAULKS & SEALANTSCaulks & Sealants Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com46

Part# DescriptionCase Qty Tube Size8150 8150 Geocel Construction Silicone - Clear 12 Tubes 10 ozPart# DescriptionCase Qty Tube SizeRP400 RP400 Plastic Wet/-Dry Surface Roof Cement 24 Tubes 10 oz8150® 100% Silicone High Performance Neutral Cure - GeocelRP-400® Plastic Wet-Dry Surface Roof Cement - Geocel8150® 100% High Performance Neutral Cure Sealant is a high modulus, one-component silicone with excellent adhesion to both porous and non-porous surfaces. It provides joint movement capability of ±25% with excellent weatherability. Ideal for a variety of construction and industrial applications.Features • 100% Silicone• Neutral cure, high modulus• Versatile, high performance• Excellent adhesion to porous and non-porous surfaces• High movement capability of ± 25%-Excellent weatherabilityFor Use On• Aluminum, glass, wood, plastic, metal, concrete, and other common building substratesRP-400® Construction Plastic Wet-Dry Surface Roof Cement is a single-component, asbestos-free, asphalt-based cement designed for many construction, roong, manufacturing, and industrial applications.Features • Use on wet or dry roof surfaces, even underwater• Formulated to seal quickly; will not pull apart or lose its bond• Remains soft and pliable• Resists temperature changeFor Use On• Asphalt, steel, brick, wood, aluminum, and other common building substrates.Limitations: Product is not recommended for exterior, below-grade use. Product is not recommended for continuous water immersion. Do not use in applications over tar, asphalt, or materials that bleed oils, plasticizers, or solvents. Do not use on marble substrates. Do not use in applications in airtight enclosures as the sealant requires atmospheric moisture to cure. Do not use on horizontal trac joints. Do not use on brass, copper, or other sensitive metals as discoloration may occur. Product may stress-craze polycarbonate materials. Do not use for potable water applications. Limitations: Do not paint or thin. Do not use with single-ply membranes such as EPDM, PVC, CSPE, etc. Product contains solvents that may craze some plastic materials. Store at room temperature for 24 hours before use to improve ease of application. Do not use in areas where food is processed or stored. Do not use in potable water applications. This product may not be sold in the state of California.DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYCAULKS & SEALANTSCAULKS & SEALANTSCaulks & SealantsCC = Color Code * = Size47

Part# DescriptionCase Qty SizeGCcc Phantom Translucent Sealant 12 Tubes 10.1 ozIntroducing an innovative color matching sealant for metal roofing substrates.Geocel Products Group Cleveland, OH 44145 GeocelUSA.com © Geocel 222-0160-000 5/21 GEOC 325/21Phantom™ Metal Roof SealantGeocel Phantom sealant has six translucent colors that allow any panel color to shine through and blend with the surface for a great look and superior protection – saving you time and money. • No need to bring multiple colors to the jobsite to find a match• Allows each color to transform and match the color it's being applied to • Provides excellent adhesion to coated metal substrates and adjacent substrates• Applies in adverse weather: damp, cold or hotPart # Color (USA) UPC SCCGC88901 Translucent White0 79239 88901 4 100 79239 88901 1GC88902 Translucent Gray 0 79239 88902 1 100 79239 88902 8GC88905 Translucent Bronze 0 79239 88905 1 100 79239 88905 8GC88910 Translucent Green 0 79239 88910 6 100 79239 88910 3GC88913 Translucent Blue 0 79239 88913 7 100 79239 88913 4GC88923 Translucent Red 0 79239 88923 6 100 79239 88923 3Product colors shown are an approximation and are not intended to be used for exact color matching.12 cartridges (9.5 lbs.) per case; Case dimensions: 8 1/4"L x 6 1/8"W x 12"HDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYCAULKS & SEALANTSCAULKS & SEALANTSCaulks & Sealants Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com48

Part# DescriptionCase Qty Tube Size5430 SM5430 Non Skinning Non-Sag Butyl Sealant 30 Tubes 10.1 ozACRYL-R 5430 - Non-skinning Roof SealantAcryl-R® SM5430 is a non-skinning, non-drying roof sealant based on a unique elastomer that provides a non-stringy consistency and excellent resistance to severe environmental conditions of heat, cold and moisture. It has excellent cut-o characteristics and is not stringy or messy to apply. It has excellent adhesion to GALVALUME®, GALVALUME PLUS®, ACRYLUME®, ZINCALUME®, KYNAR 500®, siliconized and polyvinyl uoride painted metals. It has excellent webbing characteristics.Features • Excellent adhesion to Galvalume®, Galvalume-PLUS®, ACRYLUME®, KYNAR 500®.• Will not corrode Galvalume® or copper• Not stringy or messy to apply• Excellent pumpability provides a smooth, clean application• Panels can be erected in the eld for up to six months after being factory caulked• Panels can be easily separated after extended periods for repair and maintenance• Good gunability during eld application to end laps• No priming required• Non-skinning, Non-hardening• Adheres to concrete and most construction surfacesFor Use On• SM5430 is designed for factory sealing the female lip of a concealed standing seam roof (SSR) rib, as well as wall panels and polyurethane foam panel joints where a positive seal is required in mechanically xed joints.• Specically formulated for precise application into concealed panel joints for roll forming lines• Excellent for factory sealing standing seam roof panels and end laps• Excellent for sealing between dissimilar metals to prevent electrolysis• May be used in concealed curtainwall applicationsPrecautions: Avoid skin and eye contact. On contact, uncured sealant could cause irritation to the skin and eyes. In case of eye contact, ush eyes with warm water for 15 minutes, call a physician. For skin contact remove sealant with a paper towel. If swallowed, do not induce vomiting, call a physician. KEEP OUT OF REACH OF CHILDREN. This product is manufactured for industrial use only.CAULKS & SEALANTSCAULKS & SEALANTSCaulks & SealantsCC = Color Code * = Size49

Part# DescriptionCase Qty Tube SizeNOVACL NovaFlex Silicone Metal Roof Sealant - Clear 12 Tubes 10 ozNOVAWH NovaFlex Silicone Metal Roof Sealant - White 12 Tubes 10 ozMetal Roong Sealant - NovaFlexNovaFlex Metal Roof Sealant is a single-component, high-solid, low-odor material. It cures to a medium modulus, exible, and durable rubber-like solid. NovaFlex Metal Roof Sealant will develop primerless adhesion to most common construction substrates, and the neutral cure is compatible with most materials.Recommended for Sealing: Metal siding/metal roofs, gutters, wood, steel,chimney ashing, snow guards, pipe boots, and downspouts/trim.Stocked in Clear (CL) and White (WH). More special order colors available.Features • Great for exterior and interior sealing• Permanently exible• Will not shrink or crack• Waterproof• Mold/mildew resistant• Invisible to UV light• Excellent adhesion to most building substrates• Will not sag or slump• Completely cured within 48 hours• Tack-free in 10 minutes• Excellent tooling properties• No solvents or odor (50-state VOC compliant)• Will not freezeFor Use On• Lap Joints• Pipe Boots• Trim• Copper (exposed areas)• Metal Siding• Stucco• Roof Flashing• Downspouts• Roof Tile• Termination Bars• Metal Roof• PVC/PVDF• Snow Guards• Single-Ply• Gutters• AluminumSee color chart on next page.CAULKS & SEALANTSCAULKS & SEALANTSCaulks & Sealants Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com50

MR150TRANSLUCENTMR101BLUE WHITEMR100WHITEMR105ANTIQUE WHITEMR3401EGGSHELLMR146STONEMR3461ALMONDMR191SANDSTONEMR3482SANDMR3404WHEATMR3333SIERRA TANMR3201COPPERTONEMR157COPPERMR184TERRACOTTAMR182REDMR180BRANDYWINEMR196REGAL REDMR171REGAL BLUEMR3801PACIFIC BLUEMR3510WEATHERED ZINCMR197PATINA GREENMR3702HEMLOCK GREENMR169GREENMR168HARTFORD GREENMR115LIGHT GRAYMR3514GUTTER GRAYMR4103SILVER METALLICMR156 SILVERMR118SLATE GRAYMR3421CHAMPAGNE METALLICMR155CHAMPAGNEMR117GUNMETAL GRAYMR134MEDIUM BRONZEMR137BROWNMR131CHOCOLATE BROWNMR120DARK BRONZEMR121LINCOLN BRONZEMR126CHARCOAL GRAYMR194EXTERIOR BRONZEMR110BLACKMade in USA. Professional Grade.Metal Roof & Panel Adhesive Sealant• Neutral cure silicone• Excellent adhesion • Permanently exible • Extrudes to -20°F • Adheres to: - Metals - Wood - Masonry - PVC/PVDF - Common Construction Materials • Also used as - Gutter Sealant - Chimney Flashing - Snow Guard - Pipe BootsVisit novagard.com/colors to use our online matching tool to cross reference NovaFlex colors to popular manufacturers.CAULKS & SEALANTSCAULKS & SEALANTSCaulks & SealantsCC = Color Code * = Size51

Part# DescriptionCase Qty SizePTRC Through The Roof Sealant - Clear - 10.1 OZ Tube 12 Tubes 10.1 ozPTRBL Through The Roof Sealant - Black - 10.1 OZ Tube 12 Tubes 10.1 ozPTRWH Through The Roof Sealant - White - 10.1 OZ Tube 12 Tubes 10.1 ozPTRQ Through The Roof Sealant - Clear - Quart 6 Bottles QuartPTRG Through The Roof Sealant - Clear -Gallon 2 Cans GallonThrough The Roof - SashcoMake persistent leaks and repeated repairs a thing of the past. Get Through the ROOF!® This ultra-clear roof, gutter, and ashing caulk goes on easy and remains elastic year after year to permanently seal those nagging leaks. It can even be applied in the middle of a rain storm! It’s proven to last 20 times longer than roof cement. Just say NO to leaks and repeated repairs and change your tune to “Five year leak GONE!”Features • Permanently xes nagging leaks: Proven to last 20 times longer than asphalt. Remains elastic and water-tight year after year.• Do repairs today, even in a rain storm: Sticks to surfaces wet or dry, in temperatures down to 0 and up to 120F.• Repairs stick, but don’t stick out: Tenacious adhesion to a wide variety of roong materials and won’t discolor them. Goes on crystal clear and stays clear.• Easy to use: Easy to apply for professional-looking results every time.• OK to leave in your unheated garage overnight: Through the ROOF!® won’t freeze.• Paintable with water-based paint after 24 hours. Paintable with oil-based paint after 1 week.For Use On For repairs that stick, but won’t stick out, use Through The ROOF! on common roong xtures and materials, including: Flashing, Gutters, Vents, PVC & ABS vent pipe, Skylights, Ductwork, Chimneys, Brick/block/mortar, Shingles & shakes, Roof jacks, cables, air conditioning units, and more.Adheres to most roong materials, including Metals: Aluminum, Brass, Steel, and Anodized Windows. Plastics: ABS, Nylon, PVC, Acrylic Sheet, Plexiglass, Urethane, Fiberglass, Polycarbonate, Vinyl, Lexan, and Polystyrene. Other Surfaces: Asphalt, Stone, Brick, Fiber Cement, Stucco, Tile, Concrete, Glass, Wood, Porcelain, and Mortar.Limitations: Do not use in areas of submersion or frequent, prolonged puddling, with polystyrene insulation, or in containment applications. Plastics not listed should be tested for compatibility before use. Product will not adhere to or is incompatible with Aquaseal®, Kynar®, polypropylene,polyethylene, silicone, Styrofoam® (it dissolves it), Teon®, and waxes.Part# DescriptionCase Qty SizeIST38 3/8 inch Sealant Tape 40 Rolls 3/32” x 3/8” x 45’IST12 1/2 inch Sealant Tape 32 Rolls 3/32” x 1/2” x 45’IST34 3/4 inch Sealant Tape 24 Rolls 3/32” x 3/4” x 45’IST1 1 inch Sealant Tape 20 Rolls 3/32” x 1” x 45’IST25 2-1/2 inch Sealant Tape 6 Rolls 3/16" x 2-1/2" x 20'Sealant TapeA 100% solid, asbestos free butyl tape sealant in roll form. Available for direct ship from ST Fastening Solutions.Features • Applications include metal roof endlaps, sidelaps, vents, gutters, pipe ashings, skylights.• Service temperature range is -40 Degrees F- +180 Degrees F• Material will not become brittle or crack.CAULKS & SEALANTSCAULKS & SEALANTSCaulks & Sealants Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com52DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

ROOF BOOTS

Round Roof Boot - MasterFlashManufactured from EPDM or silicone rubber, the Round MasterFlash Roof Boot is compounded for maximum resistance to ozone, UV light, & temperature extremes.Features • Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib.• Urethane sealant & self-drilling screws complete the installation.• MasterFlash Roof Boots are well marked so they can easily be cut with shears to t exactly the pipe size used.• MasterFlash Roof Boots are available in multiple colors of EPDM as well as Red or Gray high-temperature Silicone.METAL TO WOOD?1919ACCESSORIES • UNIVERSAL FLASHINGS• Manufactured from EPDM or silicone rubber, ROOFJACK RD™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackRD are well marked so they can easily be cut with shears to t exactly the pipe size used.• RoofjackRD are available in Black or Gray EPDM as well as Red or Gray high temperature Silicone.• Manufactured from EPDM or silicone rubber, RoofjackSQ™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackSQ are well marked so they can easily be cut with shears to t exactly the pipe size used. • RoofjackSQ are available in Black or Gray EPDM & Red Silicone.• RoofjackSQ can be turned so corner is pointing up the roof. It will act as a water diverter.PIPE SIZE BASE DIAMETER COLOR MATERIAL CARTONQUANTITYWEIGHTPER CARTON#1 1/4” -2-1/2” 4.75” (120.7mm) Black/Gray EPDM & Red/Gray Silicone 15 2.5#2 1-3/4”-3” 6.21” (157.7mm) Black/Gray EPDM & Red/Gray Silicone 15 4.5#3 1/4”-5” 7.74” (196.6mm) Black/Gray EPDM & Red/Gray Silicone 15 7.5#4 3”-6-1/4” 9.26” (235.2mm) Black/Gray EPDM & Red/Gray Silicone 10 8.0#5 4-1/4”-7-3/4” 10.75” (273.0mm) Black/Gray EPDM & Red/Gray Silicone 10 9.5#6 5” - 9” 12.50” (317.5mm) Black/Gray EPDM & Red/Gray Silicone 10 12.0#7 6” - 11” 14.60” (370.8mm) Black/Gray EPDM & Red/Gray Silicone 10 15.5#8 7” - 13” 16.5” (419.1mm) Black/Gray EPDM & Red/Gray Silicone 5 12.8#9 9” - 19” 25.25” (641.1mm) Black/Gray EPDM & Red/Gray Silicone 5 19.3PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTONMINI 1/8”-3/4” 2 - 1/4” (57mm) Black/Gray EPDM & Red Silicone 15 2.5 #1 1/4”-2-3/4” 4-1/2” (114mm) Black/Gray EPDM & Red Silicone 15 2.5#2 7/8”-4” 6” (152mm) Black/Gray EPDM & Red Silicone 15 4.5#3 1/4”-5-3/4” 8” (203mm) Black/Gray EPDM & Red Silicone 15 7.5#4 2-3/4”-7” 10” (254mm) Black/Gray EPDM & Red Silicone 10 8.0#5 4”-8-1/4” 11” (279mm) Black/Gray EPDM & Red Silicone 10 9.5#6 4-3/4”-10” 12” (304mm) Black/Gray EPDM & Red Silicone 10 12.0#7 5-1/2”-11-1/2” 14” (355mm) Black/Gray EPDM & Red Silicone 10 15.5#8 6-3/4”-13-1/2” 17” (431mm) Black/Gray EPDM & Red Silicone 5 12.8#9 9-1/2”-20-1/2” 25” (635mm) Black/Gray EPDM & Red Silicone 5 19.3MAXI 12”-28-1/2” 34” (863mm) Black/Gray EPDM & Red Silicone 5 25.61.Choose pipe open-ing and trim1.Choose pipe opening and trim2. Slide over pipe2. Slide over pipe3. Form to roof prole3. Form to roof prole4. Apply sealant4. Apply sealant5. Fasten to complete5. Fasten to completeEASY INSTALLATIONEASY INSTALLATIONTERRA COTTA LIGHT BLUE BRIGHT RED LIGHT GREEN DARK GREEN WHITE BROWN DARK BLUE ARCHITECTURAL ROOFJACK AVAILABLE IN 8 COLORSHigh Temperature Silicone is Now Available in GrayEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?1919ACCESSORIES • UNIVERSAL FLASHINGS• Manufactured from EPDM or silicone rubber, ROOFJACK RD™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackRD are well marked so they can easily be cut with shears to t exactly the pipe size used.• RoofjackRD are available in Black or Gray EPDM as well as Red or Gray high temperature Silicone.• Manufactured from EPDM or silicone rubber, RoofjackSQ™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackSQ are well marked so they can easily be cut with shears to t exactly the pipe size used. • RoofjackSQ are available in Black or Gray EPDM & Red Silicone.• RoofjackSQ can be turned so corner is pointing up the roof. It will act as a water diverter.PIPE SIZE BASE DIAMETER COLOR MATERIAL CARTONQUANTITYWEIGHTPER CARTON#1 1/4” -2-1/2” 4.75” (120.7mm) Black/Gray EPDM & Red/Gray Silicone 15 2.5#2 1-3/4”-3” 6.21” (157.7mm) Black/Gray EPDM & Red/Gray Silicone 15 4.5#3 1/4”-5” 7.74” (196.6mm) Black/Gray EPDM & Red/Gray Silicone 15 7.5#4 3”-6-1/4” 9.26” (235.2mm) Black/Gray EPDM & Red/Gray Silicone 10 8.0#5 4-1/4”-7-3/4” 10.75” (273.0mm) Black/Gray EPDM & Red/Gray Silicone 10 9.5#6 5” - 9” 12.50” (317.5mm) Black/Gray EPDM & Red/Gray Silicone 10 12.0#7 6” - 11” 14.60” (370.8mm) Black/Gray EPDM & Red/Gray Silicone 10 15.5#8 7” - 13” 16.5” (419.1mm) Black/Gray EPDM & Red/Gray Silicone 5 12.8#9 9” - 19” 25.25” (641.1mm) Black/Gray EPDM & Red/Gray Silicone 5 19.3PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTONMINI 1/8”-3/4” 2 - 1/4” (57mm) Black/Gray EPDM & Red Silicone 15 2.5 #1 1/4”-2-3/4” 4-1/2” (114mm) Black/Gray EPDM & Red Silicone 15 2.5#2 7/8”-4” 6” (152mm) Black/Gray EPDM & Red Silicone 15 4.5#3 1/4”-5-3/4” 8” (203mm) Black/Gray EPDM & Red Silicone 15 7.5#4 2-3/4”-7” 10” (254mm) Black/Gray EPDM & Red Silicone 10 8.0#5 4”-8-1/4” 11” (279mm) Black/Gray EPDM & Red Silicone 10 9.5#6 4-3/4”-10” 12” (304mm) Black/Gray EPDM & Red Silicone 10 12.0#7 5-1/2”-11-1/2” 14” (355mm) Black/Gray EPDM & Red Silicone 10 15.5#8 6-3/4”-13-1/2” 17” (431mm) Black/Gray EPDM & Red Silicone 5 12.8#9 9-1/2”-20-1/2” 25” (635mm) Black/Gray EPDM & Red Silicone 5 19.3MAXI 12”-28-1/2” 34” (863mm) Black/Gray EPDM & Red Silicone 5 25.61.Choose pipe open-ing and trim1.Choose pipe opening and trim2. Slide over pipe2. Slide over pipe3. Form to roof prole3. Form to roof prole4. Apply sealant4. Apply sealant5. Fasten to complete5. Fasten to completeEASY INSTALLATIONEASY INSTALLATIONTERRA COTTA LIGHT BLUE BRIGHT RED LIGHT GREEN DARK GREEN WHITE BROWN DARK BLUE ARCHITECTURAL ROOFJACK AVAILABLE IN 8 COLORSHigh Temperature Silicone is Now Available in GrayEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?1919ACCESSORIES • UNIVERSAL FLASHINGS• Manufactured from EPDM or silicone rubber, ROOFJACK RD™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackRD are well marked so they can easily be cut with shears to t exactly the pipe size used.• RoofjackRD are available in Black or Gray EPDM as well as Red or Gray high temperature Silicone.• Manufactured from EPDM or silicone rubber, RoofjackSQ™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackSQ are well marked so they can easily be cut with shears to t exactly the pipe size used. • RoofjackSQ are available in Black or Gray EPDM & Red Silicone.• RoofjackSQ can be turned so corner is pointing up the roof. It will act as a water diverter.PIPE SIZE BASE DIAMETER COLOR MATERIAL CARTONQUANTITYWEIGHTPER CARTON#1 1/4” -2-1/2” 4.75” (120.7mm) Black/Gray EPDM & Red/Gray Silicone 15 2.5#2 1-3/4”-3” 6.21” (157.7mm) Black/Gray EPDM & Red/Gray Silicone 15 4.5#3 1/4”-5” 7.74” (196.6mm) Black/Gray EPDM & Red/Gray Silicone 15 7.5#4 3”-6-1/4” 9.26” (235.2mm) Black/Gray EPDM & Red/Gray Silicone 10 8.0#5 4-1/4”-7-3/4” 10.75” (273.0mm) Black/Gray EPDM & Red/Gray Silicone 10 9.5#6 5” - 9” 12.50” (317.5mm) Black/Gray EPDM & Red/Gray Silicone 10 12.0#7 6” - 11” 14.60” (370.8mm) Black/Gray EPDM & Red/Gray Silicone 10 15.5#8 7” - 13” 16.5” (419.1mm) Black/Gray EPDM & Red/Gray Silicone 5 12.8#9 9” - 19” 25.25” (641.1mm) Black/Gray EPDM & Red/Gray Silicone 5 19.3PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTONMINI 1/8”-3/4” 2 - 1/4” (57mm) Black/Gray EPDM & Red Silicone 15 2.5 #1 1/4”-2-3/4” 4-1/2” (114mm) Black/Gray EPDM & Red Silicone 15 2.5#2 7/8”-4” 6” (152mm) Black/Gray EPDM & Red Silicone 15 4.5#3 1/4”-5-3/4” 8” (203mm) Black/Gray EPDM & Red Silicone 15 7.5#4 2-3/4”-7” 10” (254mm) Black/Gray EPDM & Red Silicone 10 8.0#5 4”-8-1/4” 11” (279mm) Black/Gray EPDM & Red Silicone 10 9.5#6 4-3/4”-10” 12” (304mm) Black/Gray EPDM & Red Silicone 10 12.0#7 5-1/2”-11-1/2” 14” (355mm) Black/Gray EPDM & Red Silicone 10 15.5#8 6-3/4”-13-1/2” 17” (431mm) Black/Gray EPDM & Red Silicone 5 12.8#9 9-1/2”-20-1/2” 25” (635mm) Black/Gray EPDM & Red Silicone 5 19.3MAXI 12”-28-1/2” 34” (863mm) Black/Gray EPDM & Red Silicone 5 25.61.Choose pipe open-ing and trim1.Choose pipe opening and trim2. Slide over pipe2. Slide over pipe3. Form to roof prole3. Form to roof prole4. Apply sealant4. Apply sealant5. Fasten to complete5. Fasten to completeEASY INSTALLATIONEASY INSTALLATIONTERRA COTTA LIGHT BLUE BRIGHT RED LIGHT GREEN DARK GREEN WHITE BROWN DARK BLUE ARCHITECTURAL ROOFJACK AVAILABLE IN 8 COLORSHigh Temperature Silicone is Now Available in GrayEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%* ** = STOCKED COLORS IN #3 ONLY. OTHER COLORS AND SIZES AVAILABLE FOR SPECIAL ORDEREPDM Color OptionsPart# DescriptionPipe Size Base Size Case QtyMF1 #1 Gray MasterFlash Round Roof Boot - EPDM 1/4” -2-1/2” 4.75” (120.7mm) 15MF2 #2 Gray MasterFlash Round Roof Boot - EPDM 1-3/4”-3” 6.21” (157.7mm) 15MF3 #3 Gray MasterFlash Round Roof Boot - EPDM 1/4”-5” 7.74” (196.6mm) 15MF3cc #3 Color MasterFlash Round Roof Boot - EPDM 1/4”-5” 7.74” (196.6mm) 15MF4 #4 Gray MasterFlash Round Roof Boot - EPDM 3”-6-1/4” 9.26” (235.2mm) 10MF5 #5 Gray MasterFlash Round Roof Boot - EPDM 4-1/4”-7-3/4” 10.75” (273.0mm) 10MF6 #6 Gray MasterFlash Round Roof Boot - EPDM 5” - 9” 12.50” (317.5mm) 10MF7 #7 Gray MasterFlash Round Roof Boot - EPDM 6” - 11” 14.60” (370.8mm) 10MF8 #8 Gray MasterFlash Round Roof Boot - EPDM 7” - 13” 16.5” (419.1mm) 5MF9 #9 Gray MasterFlash Round Roof Boot - EPDM 9” - 19” 25.25” (641.1mm) 5MF10 #10 Gray MasterFlash Round Roof Boot - EPDM 13” - 26” 34” (863.6mm) 5Special Order Colors Available in All Sizes* * * *METAL TO WOOD?1919ACCESSORIES • UNIVERSAL FLASHINGS• Manufactured from EPDM or silicone rubber, ROOFJACK RD™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackRD are well marked so they can easily be cut with shears to t exactly the pipe size used.• RoofjackRD are available in Black or Gray EPDM as well as Red or Gray high temperature Silicone.• Manufactured from EPDM or silicone rubber, RoofjackSQ™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackSQ are well marked so they can easily be cut with shears to t exactly the pipe size used. • RoofjackSQ are available in Black or Gray EPDM & Red Silicone.• RoofjackSQ can be turned so corner is pointing up the roof. It will act as a water diverter.PIPE SIZE BASE DIAMETER COLOR MATERIAL CARTONQUANTITYWEIGHTPER CARTON#1 1/4” -2-1/2” 4.75” (120.7mm) Black/Gray EPDM & Red/Gray Silicone 15 2.5#2 1-3/4”-3” 6.21” (157.7mm) Black/Gray EPDM & Red/Gray Silicone 15 4.5#3 1/4”-5” 7.74” (196.6mm) Black/Gray EPDM & Red/Gray Silicone 15 7.5#4 3”-6-1/4” 9.26” (235.2mm) Black/Gray EPDM & Red/Gray Silicone 10 8.0#5 4-1/4”-7-3/4” 10.75” (273.0mm) Black/Gray EPDM & Red/Gray Silicone 10 9.5#6 5” - 9” 12.50” (317.5mm) Black/Gray EPDM & Red/Gray Silicone 10 12.0#7 6” - 11” 14.60” (370.8mm) Black/Gray EPDM & Red/Gray Silicone 10 15.5#8 7” - 13” 16.5” (419.1mm) Black/Gray EPDM & Red/Gray Silicone 5 12.8#9 9” - 19” 25.25” (641.1mm) Black/Gray EPDM & Red/Gray Silicone 5 19.3PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTONMINI 1/8”-3/4” 2 - 1/4” (57mm) Black/Gray EPDM & Red Silicone 15 2.5 #1 1/4”-2-3/4” 4-1/2” (114mm) Black/Gray EPDM & Red Silicone 15 2.5#2 7/8”-4” 6” (152mm) Black/Gray EPDM & Red Silicone 15 4.5#3 1/4”-5-3/4” 8” (203mm) Black/Gray EPDM & Red Silicone 15 7.5#4 2-3/4”-7” 10” (254mm) Black/Gray EPDM & Red Silicone 10 8.0#5 4”-8-1/4” 11” (279mm) Black/Gray EPDM & Red Silicone 10 9.5#6 4-3/4”-10” 12” (304mm) Black/Gray EPDM & Red Silicone 10 12.0#7 5-1/2”-11-1/2” 14” (355mm) Black/Gray EPDM & Red Silicone 10 15.5#8 6-3/4”-13-1/2” 17” (431mm) Black/Gray EPDM & Red Silicone 5 12.8#9 9-1/2”-20-1/2” 25” (635mm) Black/Gray EPDM & Red Silicone 5 19.3MAXI 12”-28-1/2” 34” (863mm) Black/Gray EPDM & Red Silicone 5 25.61.Choose pipe open-ing and trim1.Choose pipe opening and trim2. Slide over pipe2. Slide over pipe3. Form to roof prole3. Form to roof prole4. Apply sealant4. Apply sealant5. Fasten to complete5. Fasten to completeEASY INSTALLATIONEASY INSTALLATIONTERRA COTTA LIGHT BLUE BRIGHT RED LIGHT GREEN DARK GREEN WHITE BROWN DARK BLUE ARCHITECTURAL ROOFJACK AVAILABLE IN 8 COLORSHigh Temperature Silicone is Now Available in GrayEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?1919ACCESSORIES • UNIVERSAL FLASHINGS• Manufactured from EPDM or silicone rubber, ROOFJACK RD™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackRD are well marked so they can easily be cut with shears to t exactly the pipe size used.• RoofjackRD are available in Black or Gray EPDM as well as Red or Gray high temperature Silicone.• Manufactured from EPDM or silicone rubber, RoofjackSQ™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackSQ are well marked so they can easily be cut with shears to t exactly the pipe size used. • RoofjackSQ are available in Black or Gray EPDM & Red Silicone.• RoofjackSQ can be turned so corner is pointing up the roof. It will act as a water diverter.PIPE SIZE BASE DIAMETER COLOR MATERIAL CARTONQUANTITYWEIGHTPER CARTON#1 1/4” -2-1/2” 4.75” (120.7mm) Black/Gray EPDM & Red/Gray Silicone 15 2.5#2 1-3/4”-3” 6.21” (157.7mm) Black/Gray EPDM & Red/Gray Silicone 15 4.5#3 1/4”-5” 7.74” (196.6mm) Black/Gray EPDM & Red/Gray Silicone 15 7.5#4 3”-6-1/4” 9.26” (235.2mm) Black/Gray EPDM & Red/Gray Silicone 10 8.0#5 4-1/4”-7-3/4” 10.75” (273.0mm) Black/Gray EPDM & Red/Gray Silicone 10 9.5#6 5” - 9” 12.50” (317.5mm) Black/Gray EPDM & Red/Gray Silicone 10 12.0#7 6” - 11” 14.60” (370.8mm) Black/Gray EPDM & Red/Gray Silicone 10 15.5#8 7” - 13” 16.5” (419.1mm) Black/Gray EPDM & Red/Gray Silicone 5 12.8#9 9” - 19” 25.25” (641.1mm) Black/Gray EPDM & Red/Gray Silicone 5 19.3PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTONMINI 1/8”-3/4” 2 - 1/4” (57mm) Black/Gray EPDM & Red Silicone 15 2.5 #1 1/4”-2-3/4” 4-1/2” (114mm) Black/Gray EPDM & Red Silicone 15 2.5#2 7/8”-4” 6” (152mm) Black/Gray EPDM & Red Silicone 15 4.5#3 1/4”-5-3/4” 8” (203mm) Black/Gray EPDM & Red Silicone 15 7.5#4 2-3/4”-7” 10” (254mm) Black/Gray EPDM & Red Silicone 10 8.0#5 4”-8-1/4” 11” (279mm) Black/Gray EPDM & Red Silicone 10 9.5#6 4-3/4”-10” 12” (304mm) Black/Gray EPDM & Red Silicone 10 12.0#7 5-1/2”-11-1/2” 14” (355mm) Black/Gray EPDM & Red Silicone 10 15.5#8 6-3/4”-13-1/2” 17” (431mm) Black/Gray EPDM & Red Silicone 5 12.8#9 9-1/2”-20-1/2” 25” (635mm) Black/Gray EPDM & Red Silicone 5 19.3MAXI 12”-28-1/2” 34” (863mm) Black/Gray EPDM & Red Silicone 5 25.61.Choose pipe open-ing and trim1.Choose pipe opening and trim2. Slide over pipe2. Slide over pipe3. Form to roof prole3. Form to roof prole4. Apply sealant4. Apply sealant5. Fasten to complete5. Fasten to completeEASY INSTALLATIONEASY INSTALLATIONTERRA COTTA LIGHT BLUE BRIGHT RED LIGHT GREEN DARK GREEN WHITE BROWN DARK BLUE ARCHITECTURAL ROOFJACK AVAILABLE IN 8 COLORSHigh Temperature Silicone is Now Available in GrayEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%ROOF BOOTSROOF BOOTSRoof Boots Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com54DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Part# DescriptionPipe Size Base Size Case QtyMF2SB #2 Black MasterFlash Square Roof Boot - EPDM 7/8”-4” 6” (152mm) 15MF3SB #3 Black MasterFlash Square Roof Boot - EPDM 1/4”-5-3/4” 8” (203mm) 15MF4SB #4 Black MasterFlash Square Roof Boot - EPDM 2-3/4”-7” 10” (254mm) 10MF5SB #5 Black MasterFlash Square Roof Boot - EPDM 4”-8-1/4” 11” (279mm) 10MF6SB #6 Black MasterFlash Square Roof Boot - EPDM 4-3/4”-10” 12” (304mm) 10MF7SB #7 Black MasterFlash Square Roof Boot - EPDM 5-1/2”-11-1/2” 14” (355mm) 10MF8SB #8 Black MasterFlash Square Roof Boot - EPDM 6-3/4”-13-1/2” 17” (431mm) 5MF9SB #9 Black MasterFlash Square Roof Boot - EPDM 9-1/2”-20-1/2” 25” (635mm) 5MFHT3#3 High-Temperature Red Master Flash Square Roof Boot - Silicone 1/4”-5-3/4” 8” (203mm) 15MFHT4#4 High-Temperature Red Master Flash Square Roof Boot - Silicone2-3/4”-7” 10” (254mm) 10MFHT5#5 High-Temperature Red Master Flash Square Roof Boot - Silicone4”-8-1/4” 11” (279mm) 10MFHT6#6 High-Temperature Red Master Flash Square Roof Boot - Silicone4-3/4”-10” 12” (304mm) 10MFHT7#7 High-Temperature Red Master Flash Square Roof Boot - Silicone5-1/2”-11-1/2” 14” (355mm) 10MFHT8#8 High-Temperature Red Master Flash Square Roof Boot - Silicone6-3/4”-13-1/2” 17” (431mm) 5MFHT9#9 High-Temperature Red Master Flash Square Roof Boot - Silicone9-1/2”-20-1/2” 25” (635mm) 5MFHT10-MAXI#10 Maxi-High-Temperature Red Master Flash Square Roof Boot - Silicone12”-28-1/2” 34” (863mm) 5Special Order Colors Available in All SizesSquare Roof Boot - MasterFlashManufactured from EPDM or silicone rubber, the Square MasterFlash Roof Boot is compounded for maximum resistance to ozone, UV light, & temperature extremes.Features • Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib.• MasterFlash Roof Boots are well marked so they can easily be cut with shears to t exactly the pipe size used.• MasterFlash Roof Boots are available in multiple colors EPDM as well as Red high-temperature Silicone.• Urethane sealant & self-drilling screws complete the installation• The advantage of the square base is that it can be angled so the corner is pointing up the roof to act as a water diverter.METAL TO WOOD?1919ACCESSORIES • UNIVERSAL FLASHINGS• Manufactured from EPDM or silicone rubber, ROOFJACK RD™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackRD are well marked so they can easily be cut with shears to t exactly the pipe size used.• RoofjackRD are available in Black or Gray EPDM as well as Red or Gray high temperature Silicone.• Manufactured from EPDM or silicone rubber, RoofjackSQ™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackSQ are well marked so they can easily be cut with shears to t exactly the pipe size used. • RoofjackSQ are available in Black or Gray EPDM & Red Silicone.• RoofjackSQ can be turned so corner is pointing up the roof. It will act as a water diverter.PIPE SIZE BASE DIAMETER COLOR MATERIAL CARTONQUANTITYWEIGHTPER CARTON#1 1/4” -2-1/2” 4.75” (120.7mm) Black/Gray EPDM & Red/Gray Silicone 15 2.5#2 1-3/4”-3” 6.21” (157.7mm) Black/Gray EPDM & Red/Gray Silicone 15 4.5#3 1/4”-5” 7.74” (196.6mm) Black/Gray EPDM & Red/Gray Silicone 15 7.5#4 3”-6-1/4” 9.26” (235.2mm) Black/Gray EPDM & Red/Gray Silicone 10 8.0#5 4-1/4”-7-3/4” 10.75” (273.0mm) Black/Gray EPDM & Red/Gray Silicone 10 9.5#6 5” - 9” 12.50” (317.5mm) Black/Gray EPDM & Red/Gray Silicone 10 12.0#7 6” - 11” 14.60” (370.8mm) Black/Gray EPDM & Red/Gray Silicone 10 15.5#8 7” - 13” 16.5” (419.1mm) Black/Gray EPDM & Red/Gray Silicone 5 12.8#9 9” - 19” 25.25” (641.1mm) Black/Gray EPDM & Red/Gray Silicone 5 19.3PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTONMINI 1/8”-3/4” 2 - 1/4” (57mm) Black/Gray EPDM & Red Silicone 15 2.5 #1 1/4”-2-3/4” 4-1/2” (114mm) Black/Gray EPDM & Red Silicone 15 2.5#2 7/8”-4” 6” (152mm) Black/Gray EPDM & Red Silicone 15 4.5#3 1/4”-5-3/4” 8” (203mm) Black/Gray EPDM & Red Silicone 15 7.5#4 2-3/4”-7” 10” (254mm) Black/Gray EPDM & Red Silicone 10 8.0#5 4”-8-1/4” 11” (279mm) Black/Gray EPDM & Red Silicone 10 9.5#6 4-3/4”-10” 12” (304mm) Black/Gray EPDM & Red Silicone 10 12.0#7 5-1/2”-11-1/2” 14” (355mm) Black/Gray EPDM & Red Silicone 10 15.5#8 6-3/4”-13-1/2” 17” (431mm) Black/Gray EPDM & Red Silicone 5 12.8#9 9-1/2”-20-1/2” 25” (635mm) Black/Gray EPDM & Red Silicone 5 19.3MAXI 12”-28-1/2” 34” (863mm) Black/Gray EPDM & Red Silicone 5 25.61.Choose pipe open-ing and trim1.Choose pipe opening and trim2. Slide over pipe2. Slide over pipe3. Form to roof prole3. Form to roof prole4. Apply sealant4. Apply sealant5. Fasten to complete5. Fasten to completeEASY INSTALLATIONEASY INSTALLATIONTERRA COTTA LIGHT BLUE BRIGHT RED LIGHT GREEN DARK GREEN WHITE BROWN DARK BLUE ARCHITECTURAL ROOFJACK AVAILABLE IN 8 COLORSHigh Temperature Silicone is Now Available in GrayEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?1919ACCESSORIES • UNIVERSAL FLASHINGS• Manufactured from EPDM or silicone rubber, ROOFJACK RD™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackRD are well marked so they can easily be cut with shears to t exactly the pipe size used.• RoofjackRD are available in Black or Gray EPDM as well as Red or Gray high temperature Silicone.• Manufactured from EPDM or silicone rubber, RoofjackSQ™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackSQ are well marked so they can easily be cut with shears to t exactly the pipe size used. • RoofjackSQ are available in Black or Gray EPDM & Red Silicone.• RoofjackSQ can be turned so corner is pointing up the roof. It will act as a water diverter.PIPE SIZE BASE DIAMETER COLOR MATERIAL CARTONQUANTITYWEIGHTPER CARTON#1 1/4” -2-1/2” 4.75” (120.7mm) Black/Gray EPDM & Red/Gray Silicone 15 2.5#2 1-3/4”-3” 6.21” (157.7mm) Black/Gray EPDM & Red/Gray Silicone 15 4.5#3 1/4”-5” 7.74” (196.6mm) Black/Gray EPDM & Red/Gray Silicone 15 7.5#4 3”-6-1/4” 9.26” (235.2mm) Black/Gray EPDM & Red/Gray Silicone 10 8.0#5 4-1/4”-7-3/4” 10.75” (273.0mm) Black/Gray EPDM & Red/Gray Silicone 10 9.5#6 5” - 9” 12.50” (317.5mm) Black/Gray EPDM & Red/Gray Silicone 10 12.0#7 6” - 11” 14.60” (370.8mm) Black/Gray EPDM & Red/Gray Silicone 10 15.5#8 7” - 13” 16.5” (419.1mm) Black/Gray EPDM & Red/Gray Silicone 5 12.8#9 9” - 19” 25.25” (641.1mm) Black/Gray EPDM & Red/Gray Silicone 5 19.3PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTONMINI 1/8”-3/4” 2 - 1/4” (57mm) Black/Gray EPDM & Red Silicone 15 2.5 #1 1/4”-2-3/4” 4-1/2” (114mm) Black/Gray EPDM & Red Silicone 15 2.5#2 7/8”-4” 6” (152mm) Black/Gray EPDM & Red Silicone 15 4.5#3 1/4”-5-3/4” 8” (203mm) Black/Gray EPDM & Red Silicone 15 7.5#4 2-3/4”-7” 10” (254mm) Black/Gray EPDM & Red Silicone 10 8.0#5 4”-8-1/4” 11” (279mm) Black/Gray EPDM & Red Silicone 10 9.5#6 4-3/4”-10” 12” (304mm) Black/Gray EPDM & Red Silicone 10 12.0#7 5-1/2”-11-1/2” 14” (355mm) Black/Gray EPDM & Red Silicone 10 15.5#8 6-3/4”-13-1/2” 17” (431mm) Black/Gray EPDM & Red Silicone 5 12.8#9 9-1/2”-20-1/2” 25” (635mm) Black/Gray EPDM & Red Silicone 5 19.3MAXI 12”-28-1/2” 34” (863mm) Black/Gray EPDM & Red Silicone 5 25.61.Choose pipe open-ing and trim1.Choose pipe opening and trim2. Slide over pipe2. Slide over pipe3. Form to roof prole3. Form to roof prole4. Apply sealant4. Apply sealant5. Fasten to complete5. Fasten to completeEASY INSTALLATIONEASY INSTALLATIONTERRA COTTA LIGHT BLUE BRIGHT RED LIGHT GREEN DARK GREEN WHITE BROWN DARK BLUE ARCHITECTURAL ROOFJACK AVAILABLE IN 8 COLORSHigh Temperature Silicone is Now Available in GrayEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?1919ACCESSORIES • UNIVERSAL FLASHINGS• Manufactured from EPDM or silicone rubber, ROOFJACK RD™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackRD are well marked so they can easily be cut with shears to t exactly the pipe size used.• RoofjackRD are available in Black or Gray EPDM as well as Red or Gray high temperature Silicone.• Manufactured from EPDM or silicone rubber, RoofjackSQ™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackSQ are well marked so they can easily be cut with shears to t exactly the pipe size used. • RoofjackSQ are available in Black or Gray EPDM & Red Silicone.• RoofjackSQ can be turned so corner is pointing up the roof. It will act as a water diverter.PIPE SIZE BASE DIAMETER COLOR MATERIAL CARTONQUANTITYWEIGHTPER CARTON#1 1/4” -2-1/2” 4.75” (120.7mm) Black/Gray EPDM & Red/Gray Silicone 15 2.5#2 1-3/4”-3” 6.21” (157.7mm) Black/Gray EPDM & Red/Gray Silicone 15 4.5#3 1/4”-5” 7.74” (196.6mm) Black/Gray EPDM & Red/Gray Silicone 15 7.5#4 3”-6-1/4” 9.26” (235.2mm) Black/Gray EPDM & Red/Gray Silicone 10 8.0#5 4-1/4”-7-3/4” 10.75” (273.0mm) Black/Gray EPDM & Red/Gray Silicone 10 9.5#6 5” - 9” 12.50” (317.5mm) Black/Gray EPDM & Red/Gray Silicone 10 12.0#7 6” - 11” 14.60” (370.8mm) Black/Gray EPDM & Red/Gray Silicone 10 15.5#8 7” - 13” 16.5” (419.1mm) Black/Gray EPDM & Red/Gray Silicone 5 12.8#9 9” - 19” 25.25” (641.1mm) Black/Gray EPDM & Red/Gray Silicone 5 19.3PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTONMINI 1/8”-3/4” 2 - 1/4” (57mm) Black/Gray EPDM & Red Silicone 15 2.5 #1 1/4”-2-3/4” 4-1/2” (114mm) Black/Gray EPDM & Red Silicone 15 2.5#2 7/8”-4” 6” (152mm) Black/Gray EPDM & Red Silicone 15 4.5#3 1/4”-5-3/4” 8” (203mm) Black/Gray EPDM & Red Silicone 15 7.5#4 2-3/4”-7” 10” (254mm) Black/Gray EPDM & Red Silicone 10 8.0#5 4”-8-1/4” 11” (279mm) Black/Gray EPDM & Red Silicone 10 9.5#6 4-3/4”-10” 12” (304mm) Black/Gray EPDM & Red Silicone 10 12.0#7 5-1/2”-11-1/2” 14” (355mm) Black/Gray EPDM & Red Silicone 10 15.5#8 6-3/4”-13-1/2” 17” (431mm) Black/Gray EPDM & Red Silicone 5 12.8#9 9-1/2”-20-1/2” 25” (635mm) Black/Gray EPDM & Red Silicone 5 19.3MAXI 12”-28-1/2” 34” (863mm) Black/Gray EPDM & Red Silicone 5 25.61.Choose pipe open-ing and trim1.Choose pipe opening and trim2. Slide over pipe2. Slide over pipe3. Form to roof prole3. Form to roof prole4. Apply sealant4. Apply sealant5. Fasten to complete5. Fasten to completeEASY INSTALLATIONEASY INSTALLATIONTERRA COTTA LIGHT BLUE BRIGHT RED LIGHT GREEN DARK GREEN WHITE BROWN DARK BLUE ARCHITECTURAL ROOFJACK AVAILABLE IN 8 COLORSHigh Temperature Silicone is Now Available in GrayEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?1919ACCESSORIES • UNIVERSAL FLASHINGS• Manufactured from EPDM or silicone rubber, ROOFJACK RD™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackRD are well marked so they can easily be cut with shears to t exactly the pipe size used.• RoofjackRD are available in Black or Gray EPDM as well as Red or Gray high temperature Silicone.• Manufactured from EPDM or silicone rubber, RoofjackSQ™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackSQ are well marked so they can easily be cut with shears to t exactly the pipe size used. • RoofjackSQ are available in Black or Gray EPDM & Red Silicone.• RoofjackSQ can be turned so corner is pointing up the roof. It will act as a water diverter.PIPE SIZE BASE DIAMETER COLOR MATERIAL CARTONQUANTITYWEIGHTPER CARTON#1 1/4” -2-1/2” 4.75” (120.7mm) Black/Gray EPDM & Red/Gray Silicone 15 2.5#2 1-3/4”-3” 6.21” (157.7mm) Black/Gray EPDM & Red/Gray Silicone 15 4.5#3 1/4”-5” 7.74” (196.6mm) Black/Gray EPDM & Red/Gray Silicone 15 7.5#4 3”-6-1/4” 9.26” (235.2mm) Black/Gray EPDM & Red/Gray Silicone 10 8.0#5 4-1/4”-7-3/4” 10.75” (273.0mm) Black/Gray EPDM & Red/Gray Silicone 10 9.5#6 5” - 9” 12.50” (317.5mm) Black/Gray EPDM & Red/Gray Silicone 10 12.0#7 6” - 11” 14.60” (370.8mm) Black/Gray EPDM & Red/Gray Silicone 10 15.5#8 7” - 13” 16.5” (419.1mm) Black/Gray EPDM & Red/Gray Silicone 5 12.8#9 9” - 19” 25.25” (641.1mm) Black/Gray EPDM & Red/Gray Silicone 5 19.3PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTONMINI 1/8”-3/4” 2 - 1/4” (57mm) Black/Gray EPDM & Red Silicone 15 2.5 #1 1/4”-2-3/4” 4-1/2” (114mm) Black/Gray EPDM & Red Silicone 15 2.5#2 7/8”-4” 6” (152mm) Black/Gray EPDM & Red Silicone 15 4.5#3 1/4”-5-3/4” 8” (203mm) Black/Gray EPDM & Red Silicone 15 7.5#4 2-3/4”-7” 10” (254mm) Black/Gray EPDM & Red Silicone 10 8.0#5 4”-8-1/4” 11” (279mm) Black/Gray EPDM & Red Silicone 10 9.5#6 4-3/4”-10” 12” (304mm) Black/Gray EPDM & Red Silicone 10 12.0#7 5-1/2”-11-1/2” 14” (355mm) Black/Gray EPDM & Red Silicone 10 15.5#8 6-3/4”-13-1/2” 17” (431mm) Black/Gray EPDM & Red Silicone 5 12.8#9 9-1/2”-20-1/2” 25” (635mm) Black/Gray EPDM & Red Silicone 5 19.3MAXI 12”-28-1/2” 34” (863mm) Black/Gray EPDM & Red Silicone 5 25.61.Choose pipe open-ing and trim1.Choose pipe opening and trim2. Slide over pipe2. Slide over pipe3. Form to roof prole3. Form to roof prole4. Apply sealant4. Apply sealant5. Fasten to complete5. Fasten to completeEASY INSTALLATIONEASY INSTALLATIONTERRA COTTA LIGHT BLUE BRIGHT RED LIGHT GREEN DARK GREEN WHITE BROWN DARK BLUE ARCHITECTURAL ROOFJACK AVAILABLE IN 8 COLORSHigh Temperature Silicone is Now Available in GrayEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?1919ACCESSORIES • UNIVERSAL FLASHINGS• Manufactured from EPDM or silicone rubber, ROOFJACK RD™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackRD are well marked so they can easily be cut with shears to t exactly the pipe size used.• RoofjackRD are available in Black or Gray EPDM as well as Red or Gray high temperature Silicone.• Manufactured from EPDM or silicone rubber, RoofjackSQ™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackSQ are well marked so they can easily be cut with shears to t exactly the pipe size used. • RoofjackSQ are available in Black or Gray EPDM & Red Silicone.• RoofjackSQ can be turned so corner is pointing up the roof. It will act as a water diverter.PIPE SIZE BASE DIAMETER COLOR MATERIAL CARTONQUANTITYWEIGHTPER CARTON#1 1/4” -2-1/2” 4.75” (120.7mm) Black/Gray EPDM & Red/Gray Silicone 15 2.5#2 1-3/4”-3” 6.21” (157.7mm) Black/Gray EPDM & Red/Gray Silicone 15 4.5#3 1/4”-5” 7.74” (196.6mm) Black/Gray EPDM & Red/Gray Silicone 15 7.5#4 3”-6-1/4” 9.26” (235.2mm) Black/Gray EPDM & Red/Gray Silicone 10 8.0#5 4-1/4”-7-3/4” 10.75” (273.0mm) Black/Gray EPDM & Red/Gray Silicone 10 9.5#6 5” - 9” 12.50” (317.5mm) Black/Gray EPDM & Red/Gray Silicone 10 12.0#7 6” - 11” 14.60” (370.8mm) Black/Gray EPDM & Red/Gray Silicone 10 15.5#8 7” - 13” 16.5” (419.1mm) Black/Gray EPDM & Red/Gray Silicone 5 12.8#9 9” - 19” 25.25” (641.1mm) Black/Gray EPDM & Red/Gray Silicone 5 19.3PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTONMINI 1/8”-3/4” 2 - 1/4” (57mm) Black/Gray EPDM & Red Silicone 15 2.5 #1 1/4”-2-3/4” 4-1/2” (114mm) Black/Gray EPDM & Red Silicone 15 2.5#2 7/8”-4” 6” (152mm) Black/Gray EPDM & Red Silicone 15 4.5#3 1/4”-5-3/4” 8” (203mm) Black/Gray EPDM & Red Silicone 15 7.5#4 2-3/4”-7” 10” (254mm) Black/Gray EPDM & Red Silicone 10 8.0#5 4”-8-1/4” 11” (279mm) Black/Gray EPDM & Red Silicone 10 9.5#6 4-3/4”-10” 12” (304mm) Black/Gray EPDM & Red Silicone 10 12.0#7 5-1/2”-11-1/2” 14” (355mm) Black/Gray EPDM & Red Silicone 10 15.5#8 6-3/4”-13-1/2” 17” (431mm) Black/Gray EPDM & Red Silicone 5 12.8#9 9-1/2”-20-1/2” 25” (635mm) Black/Gray EPDM & Red Silicone 5 19.3MAXI 12”-28-1/2” 34” (863mm) Black/Gray EPDM & Red Silicone 5 25.61.Choose pipe open-ing and trim1.Choose pipe opening and trim2. Slide over pipe2. Slide over pipe3. Form to roof prole3. Form to roof prole4. Apply sealant4. Apply sealant5. Fasten to complete5. Fasten to completeEASY INSTALLATIONEASY INSTALLATIONTERRA COTTA LIGHT BLUE BRIGHT RED LIGHT GREEN DARK GREEN WHITE BROWN DARK BLUE ARCHITECTURAL ROOFJACK AVAILABLE IN 8 COLORSHigh Temperature Silicone is Now Available in GrayEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%STOCKED IN BLACK EPDMSTOCKED IN HIGH-TEMPERATURE RED SILICONMETAL TO WOOD?1919ACCESSORIES • UNIVERSAL FLASHINGS• Manufactured from EPDM or silicone rubber, ROOFJACK RD™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackRD are well marked so they can easily be cut with shears to t exactly the pipe size used.• RoofjackRD are available in Black or Gray EPDM as well as Red or Gray high temperature Silicone.• Manufactured from EPDM or silicone rubber, RoofjackSQ™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RoofjackSQ are well marked so they can easily be cut with shears to t exactly the pipe size used. • RoofjackSQ are available in Black or Gray EPDM & Red Silicone.• RoofjackSQ can be turned so corner is pointing up the roof. It will act as a water diverter.PIPE SIZE BASE DIAMETER COLOR MATERIAL CARTONQUANTITYWEIGHTPER CARTON#1 1/4” -2-1/2” 4.75” (120.7mm) Black/Gray EPDM & Red/Gray Silicone 15 2.5#2 1-3/4”-3” 6.21” (157.7mm) Black/Gray EPDM & Red/Gray Silicone 15 4.5#3 1/4”-5” 7.74” (196.6mm) Black/Gray EPDM & Red/Gray Silicone 15 7.5#4 3”-6-1/4” 9.26” (235.2mm) Black/Gray EPDM & Red/Gray Silicone 10 8.0#5 4-1/4”-7-3/4” 10.75” (273.0mm) Black/Gray EPDM & Red/Gray Silicone 10 9.5#6 5” - 9” 12.50” (317.5mm) Black/Gray EPDM & Red/Gray Silicone 10 12.0#7 6” - 11” 14.60” (370.8mm) Black/Gray EPDM & Red/Gray Silicone 10 15.5#8 7” - 13” 16.5” (419.1mm) Black/Gray EPDM & Red/Gray Silicone 5 12.8#9 9” - 19” 25.25” (641.1mm) Black/Gray EPDM & Red/Gray Silicone 5 19.3PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTONMINI 1/8”-3/4” 2 - 1/4” (57mm) Black/Gray EPDM & Red Silicone 15 2.5 #1 1/4”-2-3/4” 4-1/2” (114mm) Black/Gray EPDM & Red Silicone 15 2.5#2 7/8”-4” 6” (152mm) Black/Gray EPDM & Red Silicone 15 4.5#3 1/4”-5-3/4” 8” (203mm) Black/Gray EPDM & Red Silicone 15 7.5#4 2-3/4”-7” 10” (254mm) Black/Gray EPDM & Red Silicone 10 8.0#5 4”-8-1/4” 11” (279mm) Black/Gray EPDM & Red Silicone 10 9.5#6 4-3/4”-10” 12” (304mm) Black/Gray EPDM & Red Silicone 10 12.0#7 5-1/2”-11-1/2” 14” (355mm) Black/Gray EPDM & Red Silicone 10 15.5#8 6-3/4”-13-1/2” 17” (431mm) Black/Gray EPDM & Red Silicone 5 12.8#9 9-1/2”-20-1/2” 25” (635mm) Black/Gray EPDM & Red Silicone 5 19.3MAXI 12”-28-1/2” 34” (863mm) Black/Gray EPDM & Red Silicone 5 25.61.Choose pipe open-ing and trim1.Choose pipe opening and trim2. Slide over pipe2. Slide over pipe3. Form to roof prole3. Form to roof prole4. Apply sealant4. Apply sealant5. Fasten to complete5. Fasten to completeEASY INSTALLATIONEASY INSTALLATIONTERRA COTTA LIGHT BLUE BRIGHT RED LIGHT GREEN DARK GREEN WHITE BROWN DARK BLUE ARCHITECTURAL ROOFJACK AVAILABLE IN 8 COLORSHigh Temperature Silicone is Now Available in GrayEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%Special Order EPDM Color OptionsROOF BOOTSROOF BOOTSRoof BootsCC = Color Code * = Size55DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

STOCKED IN GRAY EPDMMETAL TO WOOD?2020ACCESSORIES • UNIVERSAL FLASHINGS• Weather Resistance Designed to withstand the damaging eects of ultra violet light and ozone.• Modication Made Simple Easy to see pipe diameters make for painless on-site customization.• The built in 40º degree pitch allows to handle any extreme roof pitch (35º - 65º), sleeve exibility accommodates vibration and pipe movement caused by expansion/ contraction. Easy on-site customization accommodates all normal installations.• Adaptable Base. The base is designed to mold to most panel congurations and roof pitches regardless of pipe location.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON1/4” - 5-3/4” (6 - 146mm) 11” (279mm) Black EPDM//Red Silicone 5 2.5• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• Stainless steel teeth grip the material & secure it tightly.PIPE SIZE BASE DIAMETER COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 3/4”- 2-3/4” (19 - 70 mm) 6-3/10” (160mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 2”- 7-1/4” (50.8 - 184 mm) 10-3/4” (273.1mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 3-1/4” - 10”(95 - 254 mm) 14-1/2” (641.4mm) Black EPDM/Grey EPDM/Red Silicone 5 15.51. Using tin snips, cut the cone to t pipe.2. Wrap Retrot around pipe, join the interlocking teeth3. Squeeze joiner tightly with pliers to crimp4.Apply sealant shape Retrot to roof 5. Fasten Retrot to roof6. Apply additional seal-ant to mechanical locking joiner seam• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• RETROFIT Roofjack are used in applications for which a standard ashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.• Fastener snaps & cable tie are included.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 1/2” - 4” (12.7 - 101.6mm) 8” - 3/16” (80.96mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 4” - 9-1/4” (101.6 - 135mm) 14-1/4” (361.95mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 9-1/4” - 16-1/4”(235 - 412.8mm) 21-1/2” (546.1mm) Black EPDM/Grey EPDM/Red Silicone 5 15.52. Wrap and Snap3. Press and Mold4. Add Urethane Sealant.5. FastenRed Silicone Retrot Roofjack6. Install Cable Tie1. Trim to FitEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?2020ACCESSORIES • UNIVERSAL FLASHINGS• Weather Resistance Designed to withstand the damaging eects of ultra violet light and ozone.• Modication Made Simple Easy to see pipe diameters make for painless on-site customization.• The built in 40º degree pitch allows to handle any extreme roof pitch (35º - 65º), sleeve exibility accommodates vibration and pipe movement caused by expansion/ contraction. Easy on-site customization accommodates all normal installations.• Adaptable Base. The base is designed to mold to most panel congurations and roof pitches regardless of pipe location.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON1/4” - 5-3/4” (6 - 146mm) 11” (279mm) Black EPDM//Red Silicone 5 2.5• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• Stainless steel teeth grip the material & secure it tightly.PIPE SIZE BASE DIAMETER COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 3/4”- 2-3/4” (19 - 70 mm) 6-3/10” (160mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 2”- 7-1/4” (50.8 - 184 mm) 10-3/4” (273.1mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 3-1/4” - 10”(95 - 254 mm) 14-1/2” (641.4mm) Black EPDM/Grey EPDM/Red Silicone 5 15.51. Using tin snips, cut the cone to t pipe.2. Wrap Retrot around pipe, join the interlocking teeth3. Squeeze joiner tightly with pliers to crimp4.Apply sealant shape Retrot to roof 5. Fasten Retrot to roof6. Apply additional seal-ant to mechanical locking joiner seam• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• RETROFIT Roofjack are used in applications for which a standard ashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.• Fastener snaps & cable tie are included.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 1/2” - 4” (12.7 - 101.6mm) 8” - 3/16” (80.96mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 4” - 9-1/4” (101.6 - 135mm) 14-1/4” (361.95mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 9-1/4” - 16-1/4”(235 - 412.8mm) 21-1/2” (546.1mm) Black EPDM/Grey EPDM/Red Silicone 5 15.52. Wrap and Snap3. Press and Mold4. Add Urethane Sealant.5. FastenRed Silicone Retrot Roofjack6. Install Cable Tie1. Trim to FitEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?2020ACCESSORIES • UNIVERSAL FLASHINGS• Weather Resistance Designed to withstand the damaging eects of ultra violet light and ozone.• Modication Made Simple Easy to see pipe diameters make for painless on-site customization.• The built in 40º degree pitch allows to handle any extreme roof pitch (35º - 65º), sleeve exibility accommodates vibration and pipe movement caused by expansion/ contraction. Easy on-site customization accommodates all normal installations.• Adaptable Base. The base is designed to mold to most panel congurations and roof pitches regardless of pipe location.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON1/4” - 5-3/4” (6 - 146mm) 11” (279mm) Black EPDM//Red Silicone 5 2.5• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• Stainless steel teeth grip the material & secure it tightly.PIPE SIZE BASE DIAMETER COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 3/4”- 2-3/4” (19 - 70 mm) 6-3/10” (160mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 2”- 7-1/4” (50.8 - 184 mm) 10-3/4” (273.1mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 3-1/4” - 10”(95 - 254 mm) 14-1/2” (641.4mm) Black EPDM/Grey EPDM/Red Silicone 5 15.51. Using tin snips, cut the cone to t pipe.2. Wrap Retrot around pipe, join the interlocking teeth3. Squeeze joiner tightly with pliers to crimp4.Apply sealant shape Retrot to roof 5. Fasten Retrot to roof6. Apply additional seal-ant to mechanical locking joiner seam• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• RETROFIT Roofjack are used in applications for which a standard ashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.• Fastener snaps & cable tie are included.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 1/2” - 4” (12.7 - 101.6mm) 8” - 3/16” (80.96mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 4” - 9-1/4” (101.6 - 135mm) 14-1/4” (361.95mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 9-1/4” - 16-1/4”(235 - 412.8mm) 21-1/2” (546.1mm) Black EPDM/Grey EPDM/Red Silicone 5 15.52. Wrap and Snap3. Press and Mold4. Add Urethane Sealant.5. FastenRed Silicone Retrot Roofjack6. Install Cable Tie1. Trim to FitEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?2020ACCESSORIES • UNIVERSAL FLASHINGS• Weather Resistance Designed to withstand the damaging eects of ultra violet light and ozone.• Modication Made Simple Easy to see pipe diameters make for painless on-site customization.• The built in 40º degree pitch allows to handle any extreme roof pitch (35º - 65º), sleeve exibility accommodates vibration and pipe movement caused by expansion/ contraction. Easy on-site customization accommodates all normal installations.• Adaptable Base. The base is designed to mold to most panel congurations and roof pitches regardless of pipe location.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON1/4” - 5-3/4” (6 - 146mm) 11” (279mm) Black EPDM//Red Silicone 5 2.5• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• Stainless steel teeth grip the material & secure it tightly.PIPE SIZE BASE DIAMETER COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 3/4”- 2-3/4” (19 - 70 mm) 6-3/10” (160mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 2”- 7-1/4” (50.8 - 184 mm) 10-3/4” (273.1mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 3-1/4” - 10”(95 - 254 mm) 14-1/2” (641.4mm) Black EPDM/Grey EPDM/Red Silicone 5 15.51. Using tin snips, cut the cone to t pipe.2. Wrap Retrot around pipe, join the interlocking teeth3. Squeeze joiner tightly with pliers to crimp4.Apply sealant shape Retrot to roof 5. Fasten Retrot to roof6. Apply additional seal-ant to mechanical locking joiner seam• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• RETROFIT Roofjack are used in applications for which a standard ashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.• Fastener snaps & cable tie are included.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 1/2” - 4” (12.7 - 101.6mm) 8” - 3/16” (80.96mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 4” - 9-1/4” (101.6 - 135mm) 14-1/4” (361.95mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 9-1/4” - 16-1/4”(235 - 412.8mm) 21-1/2” (546.1mm) Black EPDM/Grey EPDM/Red Silicone 5 15.52. Wrap and Snap3. Press and Mold4. Add Urethane Sealant.5. FastenRed Silicone Retrot Roofjack6. Install Cable Tie1. Trim to FitEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%Part# DescriptionPipe Size Base Size Case QtyMFRJ1 #1 MasterFlash Retrot Round Roof Boot3/4”- 2-3/4” (19 - 70 mm)6-3/10” (160mm)5MFRJ2 #2 MasterFlash Retrot Round Roof Boot2”- 7-1/4” (50.8 - 184 mm)10-3/4” (273.1mm)5MFRJ3 #3 MasterFlash Retrot Round Roof Boot3-1/4” - 10” (95 - 254 mm)14-1/2” (641.4mm)5Retrot Round Roof Boot - MasterFlashManufactured from EPDM or silicone rubber, the Retrot Round MasterFlash Roof Boot is compounded for maximum resistance to ozone, UV light, & temperature extremes.Features • Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• Retrot Round Roof Boots are well marked so they can easily be cut with shears to t exactly the pipe size used.• Stainless steel teeth grip the material & secure it tightly.ROOF BOOTSROOF BOOTSRoof Boots Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com56DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

METAL TO WOOD?2020ACCESSORIES • UNIVERSAL FLASHINGS• Weather Resistance Designed to withstand the damaging eects of ultra violet light and ozone.• Modication Made Simple Easy to see pipe diameters make for painless on-site customization.• The built in 40º degree pitch allows to handle any extreme roof pitch (35º - 65º), sleeve exibility accommodates vibration and pipe movement caused by expansion/ contraction. Easy on-site customization accommodates all normal installations.• Adaptable Base. The base is designed to mold to most panel congurations and roof pitches regardless of pipe location.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON1/4” - 5-3/4” (6 - 146mm) 11” (279mm) Black EPDM//Red Silicone 5 2.5• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• Stainless steel teeth grip the material & secure it tightly.PIPE SIZE BASE DIAMETER COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 3/4”- 2-3/4” (19 - 70 mm) 6-3/10” (160mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 2”- 7-1/4” (50.8 - 184 mm) 10-3/4” (273.1mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 3-1/4” - 10”(95 - 254 mm) 14-1/2” (641.4mm) Black EPDM/Grey EPDM/Red Silicone 5 15.51. Using tin snips, cut the cone to t pipe.2. Wrap Retrot around pipe, join the interlocking teeth3. Squeeze joiner tightly with pliers to crimp4.Apply sealant shape Retrot to roof 5. Fasten Retrot to roof6. Apply additional seal-ant to mechanical locking joiner seam• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• RETROFIT Roofjack are used in applications for which a standard ashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.• Fastener snaps & cable tie are included.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 1/2” - 4” (12.7 - 101.6mm) 8” - 3/16” (80.96mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 4” - 9-1/4” (101.6 - 135mm) 14-1/4” (361.95mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 9-1/4” - 16-1/4”(235 - 412.8mm) 21-1/2” (546.1mm) Black EPDM/Grey EPDM/Red Silicone 5 15.52. Wrap and Snap3. Press and Mold4. Add Urethane Sealant.5. FastenRed Silicone Retrot Roofjack6. Install Cable Tie1. Trim to FitEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?2020ACCESSORIES • UNIVERSAL FLASHINGS• Weather Resistance Designed to withstand the damaging eects of ultra violet light and ozone.• Modication Made Simple Easy to see pipe diameters make for painless on-site customization.• The built in 40º degree pitch allows to handle any extreme roof pitch (35º - 65º), sleeve exibility accommodates vibration and pipe movement caused by expansion/ contraction. Easy on-site customization accommodates all normal installations.• Adaptable Base. The base is designed to mold to most panel congurations and roof pitches regardless of pipe location.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON1/4” - 5-3/4” (6 - 146mm) 11” (279mm) Black EPDM//Red Silicone 5 2.5• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• Stainless steel teeth grip the material & secure it tightly.PIPE SIZE BASE DIAMETER COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 3/4”- 2-3/4” (19 - 70 mm) 6-3/10” (160mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 2”- 7-1/4” (50.8 - 184 mm) 10-3/4” (273.1mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 3-1/4” - 10”(95 - 254 mm) 14-1/2” (641.4mm) Black EPDM/Grey EPDM/Red Silicone 5 15.51. Using tin snips, cut the cone to t pipe.2. Wrap Retrot around pipe, join the interlocking teeth3. Squeeze joiner tightly with pliers to crimp4.Apply sealant shape Retrot to roof 5. Fasten Retrot to roof6. Apply additional seal-ant to mechanical locking joiner seam• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• RETROFIT Roofjack are used in applications for which a standard ashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.• Fastener snaps & cable tie are included.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 1/2” - 4” (12.7 - 101.6mm) 8” - 3/16” (80.96mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 4” - 9-1/4” (101.6 - 135mm) 14-1/4” (361.95mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 9-1/4” - 16-1/4”(235 - 412.8mm) 21-1/2” (546.1mm) Black EPDM/Grey EPDM/Red Silicone 5 15.52. Wrap and Snap3. Press and Mold4. Add Urethane Sealant.5. FastenRed Silicone Retrot Roofjack6. Install Cable Tie1. Trim to FitEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?2020ACCESSORIES • UNIVERSAL FLASHINGS• Weather Resistance Designed to withstand the damaging eects of ultra violet light and ozone.• Modication Made Simple Easy to see pipe diameters make for painless on-site customization.• The built in 40º degree pitch allows to handle any extreme roof pitch (35º - 65º), sleeve exibility accommodates vibration and pipe movement caused by expansion/ contraction. Easy on-site customization accommodates all normal installations.• Adaptable Base. The base is designed to mold to most panel congurations and roof pitches regardless of pipe location.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON1/4” - 5-3/4” (6 - 146mm) 11” (279mm) Black EPDM//Red Silicone 5 2.5• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• Stainless steel teeth grip the material & secure it tightly.PIPE SIZE BASE DIAMETER COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 3/4”- 2-3/4” (19 - 70 mm) 6-3/10” (160mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 2”- 7-1/4” (50.8 - 184 mm) 10-3/4” (273.1mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 3-1/4” - 10”(95 - 254 mm) 14-1/2” (641.4mm) Black EPDM/Grey EPDM/Red Silicone 5 15.51. Using tin snips, cut the cone to t pipe.2. Wrap Retrot around pipe, join the interlocking teeth3. Squeeze joiner tightly with pliers to crimp4.Apply sealant shape Retrot to roof 5. Fasten Retrot to roof6. Apply additional seal-ant to mechanical locking joiner seam• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• RETROFIT Roofjack are used in applications for which a standard ashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.• Fastener snaps & cable tie are included.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 1/2” - 4” (12.7 - 101.6mm) 8” - 3/16” (80.96mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 4” - 9-1/4” (101.6 - 135mm) 14-1/4” (361.95mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 9-1/4” - 16-1/4”(235 - 412.8mm) 21-1/2” (546.1mm) Black EPDM/Grey EPDM/Red Silicone 5 15.52. Wrap and Snap3. Press and Mold4. Add Urethane Sealant.5. FastenRed Silicone Retrot Roofjack6. Install Cable Tie1. Trim to FitEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?2020ACCESSORIES • UNIVERSAL FLASHINGS• Weather Resistance Designed to withstand the damaging eects of ultra violet light and ozone.• Modication Made Simple Easy to see pipe diameters make for painless on-site customization.• The built in 40º degree pitch allows to handle any extreme roof pitch (35º - 65º), sleeve exibility accommodates vibration and pipe movement caused by expansion/ contraction. Easy on-site customization accommodates all normal installations.• Adaptable Base. The base is designed to mold to most panel congurations and roof pitches regardless of pipe location.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON1/4” - 5-3/4” (6 - 146mm) 11” (279mm) Black EPDM//Red Silicone 5 2.5• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• Stainless steel teeth grip the material & secure it tightly.PIPE SIZE BASE DIAMETER COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 3/4”- 2-3/4” (19 - 70 mm) 6-3/10” (160mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 2”- 7-1/4” (50.8 - 184 mm) 10-3/4” (273.1mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 3-1/4” - 10”(95 - 254 mm) 14-1/2” (641.4mm) Black EPDM/Grey EPDM/Red Silicone 5 15.51. Using tin snips, cut the cone to t pipe.2. Wrap Retrot around pipe, join the interlocking teeth3. Squeeze joiner tightly with pliers to crimp4.Apply sealant shape Retrot to roof 5. Fasten Retrot to roof6. Apply additional seal-ant to mechanical locking joiner seam• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• RETROFIT Roofjack are used in applications for which a standard ashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.• Fastener snaps & cable tie are included.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 1/2” - 4” (12.7 - 101.6mm) 8” - 3/16” (80.96mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 4” - 9-1/4” (101.6 - 135mm) 14-1/4” (361.95mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 9-1/4” - 16-1/4”(235 - 412.8mm) 21-1/2” (546.1mm) Black EPDM/Grey EPDM/Red Silicone 5 15.52. Wrap and Snap3. Press and Mold4. Add Urethane Sealant.5. FastenRed Silicone Retrot Roofjack6. Install Cable Tie1. Trim to FitEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?2020ACCESSORIES • UNIVERSAL FLASHINGS• Weather Resistance Designed to withstand the damaging eects of ultra violet light and ozone.• Modication Made Simple Easy to see pipe diameters make for painless on-site customization.• The built in 40º degree pitch allows to handle any extreme roof pitch (35º - 65º), sleeve exibility accommodates vibration and pipe movement caused by expansion/ contraction. Easy on-site customization accommodates all normal installations.• Adaptable Base. The base is designed to mold to most panel congurations and roof pitches regardless of pipe location.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON1/4” - 5-3/4” (6 - 146mm) 11” (279mm) Black EPDM//Red Silicone 5 2.5• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• Stainless steel teeth grip the material & secure it tightly.PIPE SIZE BASE DIAMETER COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 3/4”- 2-3/4” (19 - 70 mm) 6-3/10” (160mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 2”- 7-1/4” (50.8 - 184 mm) 10-3/4” (273.1mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 3-1/4” - 10”(95 - 254 mm) 14-1/2” (641.4mm) Black EPDM/Grey EPDM/Red Silicone 5 15.51. Using tin snips, cut the cone to t pipe.2. Wrap Retrot around pipe, join the interlocking teeth3. Squeeze joiner tightly with pliers to crimp4.Apply sealant shape Retrot to roof 5. Fasten Retrot to roof6. Apply additional seal-ant to mechanical locking joiner seam• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• RETROFIT Roofjack are used in applications for which a standard ashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.• Fastener snaps & cable tie are included.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 1/2” - 4” (12.7 - 101.6mm) 8” - 3/16” (80.96mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 4” - 9-1/4” (101.6 - 135mm) 14-1/4” (361.95mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 9-1/4” - 16-1/4”(235 - 412.8mm) 21-1/2” (546.1mm) Black EPDM/Grey EPDM/Red Silicone 5 15.52. Wrap and Snap3. Press and Mold4. Add Urethane Sealant.5. FastenRed Silicone Retrot Roofjack6. Install Cable Tie1. Trim to FitEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%Part# DescriptionPipe Size Base Size Case QtyMFRF101 #1 MasterFlash Retrot Square Roof Boot1/2” - 4” (12.7-101.6mm)8” - 3/16” (80.96mm)5MFRF102 #2 MasterFlash Retrot Square Roof Boot4” - 9-1/4” (101.6 -135mm)14-1/4” (361.95mm)5MFRF103 #3 MasterFlash Retrot Square Roof Boot9-1/4” - 16-1/4”(235 - 412.8mm)21-1/2” (546.1mm)5MFRF101BL #1 MasterFlash Retrot Square Roof Boot1/2” - 4” (12.7-101.6mm)8” - 3/16” (80.96mm)5MFRF102BL #2 MasterFlash Retrot Square Roof Boot4” - 9-1/4” (101.6 -135mm)14-1/4” (361.95mm) 5MFRF103BL #3 MasterFlash Retrot Square Roof Boot9-1/4” - 16-1/4”(235 - 412.8mm)21-1/2” (546.1mm)5Retrot Square Roof Boot - MasterFlashManufactured from EPDM or silicone rubber, the Retrot Square MasterFlash Roof Boot is compounded for maximum resistance to ozone, UV light, & temperature extremes.Features • Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.• Retrot Square Roof Boots are well marked so they can easily be cut with shears to t exactly the pipe size used.• Retrot Square Roof Boots are used in applications for which a standard ashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.• Fastener snaps & cable tie are included.• Available in EPDM and Silicone.Special OrderBlack EPDM High-Temp Red SiliconMETAL TO WOOD?2020ACCESSORIES • UNIVERSAL FLASHINGS• Weather Resistance Designed to withstand the damaging eects of ultra violet light and ozone.• Modication Made Simple Easy to see pipe diameters make for painless on-site customization.• The built in 40º degree pitch allows to handle any extreme roof pitch (35º - 65º), sleeve exibility accommodates vibration and pipe movement caused by expansion/ contraction. Easy on-site customization accommodates all normal installations.• Adaptable Base. The base is designed to mold to most panel congurations and roof pitches regardless of pipe location.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON1/4” - 5-3/4” (6 - 146mm) 11” (279mm) Black EPDM//Red Silicone 5 2.5• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• Stainless steel teeth grip the material & secure it tightly.PIPE SIZE BASE DIAMETER COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 3/4”- 2-3/4” (19 - 70 mm) 6-3/10” (160mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 2”- 7-1/4” (50.8 - 184 mm) 10-3/4” (273.1mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 3-1/4” - 10”(95 - 254 mm) 14-1/2” (641.4mm) Black EPDM/Grey EPDM/Red Silicone 5 15.51. Using tin snips, cut the cone to t pipe.2. Wrap Retrot around pipe, join the interlocking teeth3. Squeeze joiner tightly with pliers to crimp4.Apply sealant shape Retrot to roof 5. Fasten Retrot to roof6. Apply additional seal-ant to mechanical locking joiner seam• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• RETROFIT Roofjack are used in applications for which a standard ashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.• Fastener snaps & cable tie are included.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 1/2” - 4” (12.7 - 101.6mm) 8” - 3/16” (80.96mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 4” - 9-1/4” (101.6 - 135mm) 14-1/4” (361.95mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 9-1/4” - 16-1/4”(235 - 412.8mm) 21-1/2” (546.1mm) Black EPDM/Grey EPDM/Red Silicone 5 15.52. Wrap and Snap3. Press and Mold4. Add Urethane Sealant.5. FastenRed Silicone Retrot Roofjack6. Install Cable Tie1. Trim to FitEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%METAL TO WOOD?2020ACCESSORIES • UNIVERSAL FLASHINGS• Weather Resistance Designed to withstand the damaging eects of ultra violet light and ozone.• Modication Made Simple Easy to see pipe diameters make for painless on-site customization.• The built in 40º degree pitch allows to handle any extreme roof pitch (35º - 65º), sleeve exibility accommodates vibration and pipe movement caused by expansion/ contraction. Easy on-site customization accommodates all normal installations.• Adaptable Base. The base is designed to mold to most panel congurations and roof pitches regardless of pipe location.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON1/4” - 5-3/4” (6 - 146mm) 11” (279mm) Black EPDM//Red Silicone 5 2.5• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• Stainless steel teeth grip the material & secure it tightly.PIPE SIZE BASE DIAMETER COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 3/4”- 2-3/4” (19 - 70 mm) 6-3/10” (160mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 2”- 7-1/4” (50.8 - 184 mm) 10-3/4” (273.1mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 3-1/4” - 10”(95 - 254 mm) 14-1/2” (641.4mm) Black EPDM/Grey EPDM/Red Silicone 5 15.51. Using tin snips, cut the cone to t pipe.2. Wrap Retrot around pipe, join the interlocking teeth3. Squeeze joiner tightly with pliers to crimp4.Apply sealant shape Retrot to roof 5. Fasten Retrot to roof6. Apply additional seal-ant to mechanical locking joiner seam• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.• Flexible aluminum base will allow the ashing to conform to any metal roof conguration. Pipe location can be centered in the at of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.• RETROFIT Roofjack are well marked so they can easily be cut with shears to t exactly the pipe size used.• RETROFIT Roofjack are used in applications for which a standard ashing will not work. It wraps around the pipe instead of pulling down over the pipe. Hardware is included to ensure a watertight connection.• Fastener snaps & cable tie are included.PIPE SIZE BASE DIMENSION COLOR MATERIALCARTONQUANTITYWEIGHTPER CARTON#1 1/2” - 4” (12.7 - 101.6mm) 8” - 3/16” (80.96mm) Black EPDM/Grey EPDM/Red Silicone 5 2.5#2 4” - 9-1/4” (101.6 - 135mm) 14-1/4” (361.95mm) Black EPDM/Grey EPDM/Red Silicone 5 8.0#3 9-1/4” - 16-1/4”(235 - 412.8mm) 21-1/2” (546.1mm) Black EPDM/Grey EPDM/Red Silicone 5 15.52. Wrap and Snap3. Press and Mold4. Add Urethane Sealant.5. FastenRed Silicone Retrot Roofjack6. Install Cable Tie1. Trim to FitEPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%EPDM 500 SILICONEAdvanced Ozone Resistance Tested to…70 hr @500 pphm70 hr @ 500 pphmHigh Temperature ResistanceTested to Intermittent Continuous+135ºC (+275ºF)+100ºC (+212ºF)+260ºC (+500ºF)+225ºC (+500ºF)Low Temperature Resistance tested to… -55ºC (-65ºF) -74ºC (-100ºF)Tensile Set Maximum…Compression Set Maximum…10MPa (1450psi)25%5MPa (700psi)50%Part# DescriptionPipe Size Base Size Case QtyMFEAMasterFlash Extreme Angle Roof Boot Black - EPDM1/4” - 5-3/4” (6 - 146mm)11” (279mm) 5Extreme Angle Roof Boot - MasterFlashThe built-in 40º degree pitch allows to handle any extreme roof pitch (35º - 65º), sleeve exibility accommodates vibration and pipe movement caused by expansion/contraction. Easy on-site customization accommodates all normal installations.Features • Weather Resistance Designed to withstand the damaging eects of ultra violet light and ozone.• Modication made simple easy to see pipe diameters make for painless on-site customization.• Adaptable Base. The base is designed to mold to most panel congurations and roof pitches regardless of pipe location.• Stocked in Black EPDM. Also available in Red Silicone.Special OrderROOF BOOTSROOF BOOTSROOF BOOTSROOF BOOTSRoof BootsCC = Color Code * = Size57DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

VENTILATION & CLOSURES

Clear Poly Rain Diverter or Metal DiverterWire MeshPainted Steel Side WallsPainted Steel BasePart# Description Height Width LengthRV35Fcc RD35 Ridge Vent with Clear Skylight Diverter 7" 13.5" 10'RV35cc RD35 Ridge Vent with Metal Diverter 7" 13.5" 10'Proper ventilation in your ceiling or attic has been known to extend the life of your building and decrease heating and cooling costs. The RD35 Ridge Vent does double-duty as a ridge cap and ventilation system combined.The heavy-duty system is also completely water proof with the clear poly rain diverter that also doubles as a small skylight. A steel rain diverter is available upon request.Available in all of our color options.Features • Sub-straight: 29 Ga. Galvanized Steel• Length: 10’• Width: 13.5”• Ventilation: 36 square inches of airow per linear foot.RD35 Ridge VentVENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVentilation & ClosuresCC = Color Code * = Size59

Ultra-Ventthe universal ventilation sys te mStock One ProductUltra-Vent confor ms to any r oof panel40 Year Warranty • Patent PendingIndependent TestingPROPERTY TEST RESULTS90 mph Wind Driven Rain CRL 6875 No LeakageNet Free Area 1” nom. Thickness 8.5 sq. in. per lin. Ft. per side (17 sq. in per lin. Ft. ridge)Air Permeability ASTM D737 840 cu. ft. / min.Cold Crack F87260 Sec. 4-C14 Resistance to -55° CSnow Infiltration CRL 5704 -0-Tear Strength ASTM D3574 3.5 p.p.i.Tensile Strength ASTM D3574 16 p.s.i. - Elong 175%Attic Dust ASTM D1739-98 No CloggingDust Exposure ICBO AC132 No CloggingCompressive Strength ASTM D3574 1.8 p.s.i. @ 75%UV Stable Chamber Test No change to color or materialsAbrasion ASTM D1175 No damageNow tested upto 90 mph winddriven rain withNOmeasurableleakageUltra-Ventthe universal ventilation sys te mStock One ProductUltra-Vent confor ms to any r oof panel40 Year Warranty • Patent PendingIndependent TestingPROPERTY TEST RESULTS90 mph Wind Driven Rain CRL 6875 No LeakageNet Free Area 1” nom. Thickness 8.5 sq. in. per lin. Ft. per side (17 sq. in per lin. Ft. ridge)Air Permeability ASTM D737 840 cu. ft. / min.Cold Crack F87260 Sec. 4-C14 Resistance to -55° CSnow Infiltration CRL 5704 -0-Tear Strength ASTM D3574 3.5 p.p.i.Tensile Strength ASTM D3574 16 p.s.i. - Elong 175%Attic Dust ASTM D1739-98 No CloggingDust Exposure ICBO AC132 No CloggingCompressive Strength ASTM D3574 1.8 p.s.i. @ 75%UV Stable Chamber Test No change to color or materialsAbrasion ASTM D1175 No damageNow tested upto 90 mph winddriven rain withNOmeasurableleakageUltra-Ventthe universal ventilation systemStock One ProductUltra-Vent confor ms to any r oof panel40 Year Warranty • Patent PendingIndependent TestingPROPERTY TEST RESULTS90 mph Wind Driven Rain CRL 6875 No LeakageNet Free Area 1” nom. Thickness 8.5 sq. in. per lin. Ft. per side (17 sq. in per lin. Ft. ridge)Air Permeability ASTM D737 840 cu. ft. / min.Cold Crack F87260 Sec. 4-C14 Resistance to -55° CSnow Infiltration CRL 5704 -0-Tear Strength ASTM D3574 3.5 p.p.i.Tensile Strength ASTM D3574 16 p.s.i. - Elong 175%Attic Dust ASTM D1739-98 No CloggingDust Exposure ICBO AC132 No CloggingCompressive Strength ASTM D3574 1.8 p.s.i. @ 75%UV Stable Chamber Test No change to color or materialsAbrasion ASTM D1175 No damageNow tested upto 90 mph winddriven rain withNOmeasurableleakage40 Year Warranty • Patent PendingUltra-Vent will conform to virtually any roof panel configuration. It compresses and fills every void between your ridge cap and the roof panel. Factory applied glue strips allow the installer to roll out Ultra-Vent and apply it to the roof panel, even in windy conditions. Then, any standard ridge cap can finish off the installation.Tested up to 90 mph wind driven rain with NO measurable leakageVentilation & Closures Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com60

Ultra-Ventthe universal ventilation sys te mStock One ProductUltra-Vent confor ms to any r oof panel40 Year Warranty • Patent PendingIndependent TestingPROPERTY TEST RESULTS90 mph Wind Driven Rain CRL 6875 No LeakageNet Free Area 1” nom. Thickness 8.5 sq. in. per lin. Ft. per side (17 sq. in per lin. Ft. ridge)Air Permeability ASTM D737 840 cu. ft. / min.Cold Crack F87260 Sec. 4-C14 Resistance to -55° CSnow Infiltration CRL 5704 -0-Tear Strength ASTM D3574 3.5 p.p.i.Tensile Strength ASTM D3574 16 p.s.i. - Elong 175%Attic Dust ASTM D1739-98 No CloggingDust Exposure ICBO AC132 No CloggingCompressive Strength ASTM D3574 1.8 p.s.i. @ 75%UV Stable Chamber Test No change to color or materialsAbrasion ASTM D1175 No damageNow tested upto 90 mph winddriven rain withNOmeasurableleakageUltra-Ventthe universal ventilation sys te mStock One ProductUltra-Vent confor ms to any r oof panel40 Year Warranty • Patent PendingIndependent TestingPROPERTY TEST RESULTS90 mph Wind Driven Rain CRL 6875 No LeakageNet Free Area 1” nom. Thickness 8.5 sq. in. per lin. Ft. per side (17 sq. in per lin. Ft. ridge)Air Permeability ASTM D737 840 cu. ft. / min.Cold Crack F87260 Sec. 4-C14 Resistance to -55° CSnow Infiltration CRL 5704 -0-Tear Strength ASTM D3574 3.5 p.p.i.Tensile Strength ASTM D3574 16 p.s.i. - Elong 175%Attic Dust ASTM D1739-98 No CloggingDust Exposure ICBO AC132 No CloggingCompressive Strength ASTM D3574 1.8 p.s.i. @ 75%UV Stable Chamber Test No change to color or materialsAbrasion ASTM D1175 No damageNow tested upto 90 mph winddriven rain withNOmeasurableleakagePart# Description Skid Qty Height Width LengthUV Ultra Vent Under Ridge Cap Ventilation 135 1” 1.5” 20’UV15 Ultra Vent Under Ridge Cap Ventilation 56 1.5" 2 25'Ultra VentThe ultimate in vent closures is now tested in up to 90 mph wind-driven rain with NO measurable leakage!Meet the Ultra-Vent: the universal ventilation system that conforms to any roof panel. It compresses and lls every void between your ridge cap and the roof panel. Factory applied glue strips allow the installer to roll out Ultra-Vent and apply it to the roof panel, even in windy conditions. Can be used between panels with a gable overlap or with a ridge cap system.Features • Pure Polyurethane Foam• Vinyl Coating• UV Stabilized/Fire Retardant• Continuous Double Glue Strip • Use on any roof pitch from ⁄ to ⁄• Independent Testing• Air Permeability: 840 Cu. FT. / MIN• Now you can stock one product to match any roof panel conguration• Material is 1" x 1.5" x 20' rolls.• Stock one product to match any roof panel configuration• Use on any roof pitch from 2/12 to 20/12Allow a minimum of a 1-1/2” wide openingat the peak of the roof.For proper air flow, the downhill edge of the Ultra-Vent™ should be no more than 1/2" above the lower edge of the ridge capUltra-Vent™ will compress at the major and minor ribs to fill all gaps. The installer can utilize the same fasteners that would be used for a normal ridge cap installation.After the Ultra-Vent™ is rolled out over the high ribs, the installer must press down between the high ribs for full adhesion.Ultra-Vent™ should stick initially at high ribs and at low point in betweenRoll out Ultra-Vent™ over the high ribs with a slight droop in the middle.Physical PropertiesPure Polyurethane FoamVinyl CoatingUV Stabilized/Fire RetardantContinuous Double Glue Stripab martin_Ultra-Vent_2011:MWI_Uni-Vent.qxd 4/28/2011 7:32 AM Page 2FITS ANY PROFILESHIPPING NATION-WIDEMATERIAL DETAILRIDGECAP DETAILVENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVentilation & ClosuresCC = Color Code * = Size61

Em-Seal Closure - AST Hi-AcrylicEm-Seal Foam ClosurePart# Description Pck. Qty. Height Width LengthEMS Em-Seal Expandable Closure 26 1" 1" 19.68'EMS1.5 Em-Seal Expandable Closure for PBR 16 1.5" 1.5" 13.12'Em-Seal is a self-adhering tape seal made from resilient, open-cell polyurethane foam impregnated with a water-based acrylic- modied asphalt emulsion and then compressed to a sealing density level appropriate to the application. Typically, higher compression levels are required for watertightness in water run-o applications; lower compression can be used, for example, for snow seals at roof ridges. Em-Seal replaces and outperforms liquid and butyl-tape sealants as well as closed-cell and unimpregnated open-cell foam closures.Em-Seal sealant tape is used to seal out dust, air, wind-driven snow, and moisture through joint details in metal buildings and roofs. Em-Seal is ideal as a ller in expansion/compression joints subject to movement from thermal expansion and contraction, and as a gasket in mechanically fastened, non-moving applications such as lap seams. Em-Seal is suitable for use against metal, plastic, wood, concrete, and other materials common in metal building structures.Features • Watertight at 80% Compressed• Stops Flowing Water at 75% Compressed• Blocks Air and Acoustic at 68%• Restricts Hot, Cold, Dust at 18% • Will not dry out and become brittle• UV-stable• Highly resistant to bugs and vermin• Will not extrude from between joints like caulk or butyl tapes• Conforms to contours and lls gaps• Maintains a seal during thermal expansion and contraction of building panels• Excellent compressibility and recovery (minimal compression set)• Good thermal and sound insulator• No shrinkage or blow-out due to closed-cell breakage• Supplied with self-adhesive on one side. After removal of packaging, material begins gradual expansion - more slowly in cold weather than in hot.• Sold by the piece.®       � 1•  Metal Roof & Building Sealants       Compression Levels    Higher levels of compssion oer protection               CANNONBALL HNP   EM-SEALEM-SEALEM-SEAL®     � 1•  Metal Roof & Building Sealants     Compression Levels    Higher levels of compssion oer protection    CANNONBALL HNP   Ventilation & Closures Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com62DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

® AST Hi-Acrylic EMSEAL AST Hi-Aclic Metal Roof & Building Sealants                   ••  Standard & Custom Sizes Available  - -       X X X 1   X X   X   X          X  X      X     CANNONBALL:HNP           CNB-EM-APOOl ® AST Hi-Acrylic  EMSEAL AST Hi-Aclic Metal Roof & Building Sealants                    ••  Standard & Custom Sizes Available  - -         X X X 1   X X   X   X           X  X      X      CANNONBALL:HNP           CNB-EM-APOOl MATERIAL DETAIL®       � 1•  Metal Roof & Building Sealants       Compression Levels    Higher levels of compssion oer protection               CANNONBALL HNP   ®       � 1•  Metal Roof & Building Sealants       Compression Levels    Higher levels of compssion oer protection              CANNONBALL HNP   VENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVentilation & ClosuresCC = Color Code * = Size63

Part# Description Pck. Qty. Height Width LengthPart# Description Pck. Qty. Height Width LengthCVP2 Perform Vent II with Continues Glue Strip 4 1" 2" 50'CVP Perform Vent Notched for 9" Ribs with Glue Dot 2 1" 2" 50'CV Perform Vent for Hip/Ridge 2 1" 3" 50'Perform VentPython VentFeatures • One person roll-out installation• Won’t crack, dent or rust during shipping or installation• Won't scratch panel nish• Won’t clog from airborne dust• Prevents insect inltration• Prevents snow inltration• Provides proven roof ventilation• Invisible from the curb• Will not support a ame• Made in USA• Made from over 90% recycled ber; over 30% post-consumer content• Sold by the piece and alsoFeatures • Easy to handle & install - It’s light, exible and there’s no diculty tting or wrapping.• No fabric wrap, no external bae - Nothing to cause clogging, deterioration, or dirt and snow trapping. Yet, Python helps keep out insects, dust, and moisture.• Made from more than 90% recycled plastic - material (more than 30% post consumer content). And since Python can help draw cool air into the attic and hot air out in summer, it can help reduce utility costs.• Strong and durable - Python is non-woven, non-wicking and resists damage from ice, hail, and other weather, which means fewer warping and loosening problems.• Economical - Python’s exibility means there’s no shipping or installation crack or dent damage. There’s no waste with Python— you can use every piece. And its durability means it lasts for a long time.SHIPPING NATION-WIDEMATERIAL DETAILPVerformentCut to FitRidge VentilationPerform Vent Installation InstructionsABM Panel Profilewith Glue2-50’ Rolls - 100 Lineal Ft./Pkg.• Glue spots prevent slipping during installation• Fits under any ridge cap• Fits any pitch 3:12 - 20:12• One person roll-out installation• Won’t crack, dent or rust during shipping or installation• Wont’s scratch panel finish• Won’t clog from airborne dust1. Allow a 2” opening at ridge for ventilation. Perform Vent is rolled out along the ridge, gable to gable. Install Perform Vent about 1/2” to 1” up-slope from the edge of the ridge cap. 2. Perform Vent can be cut with scissors or utility knife.When splicing Perform Vent, make the splice at the center top of the high rib and use caulk or sealant along the splice.3. Screw through ridge cap into top of each panel rib.• Prevents insect infiltration• Prevents snow infiltration• Provides proven roof ventilation• Invisible from the curb• Will not support a flame• Made in USA• Made from over 90% recycled fiber; over 30% post-consumer contectwww.abmartin.net82 Garden Spot RoadEphrata, PA 17522717-445-688535 Rige RoadNewville, PA 17241717-776-5951April 2015PVerformentCut to FitRidge VentilationPerform Vent Installation InstructionsABM Panel Profilewith Glue2-50’ Rolls - 100 Lineal Ft./Pkg.• Glue spots prevent slipping during installation• Fits under any ridge cap• Fits any pitch 3:12 - 20:12• One person roll-out installation• Won’t crack, dent or rust during shipping or installation• Wont’s scratch panel finish• Won’t clog from airborne dust1. Allow a 2” opening at ridge for ventilation. Perform Vent is rolled out along the ridge, gable to gable. Install Perform Vent about 1/2” to 1” up-slope from the edge of the ridge cap. 2. Perform Vent can be cut with scissors or utility knife.When splicing Perform Vent, make the splice at the center top of the high rib and use caulk or sealant along the splice.3. Screw through ridge cap into top of each panel rib.• Prevents insect infiltration• Prevents snow infiltration• Provides proven roof ventilation• Invisible from the curb• Will not support a flame• Made in USA• Made from over 90% recycled fiber; over 30% post-consumer contectwww.abmartin.net82 Garden Spot RoadEphrata, PA 17522717-445-688535 Rige RoadNewville, PA 17241717-776-5951April 2015IIRidge Cap Ventilation Roll with Continuous Glue Strip50‘ Long2” Wide1” Thick Fits all low-prole panels888-606-1094VENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVentilation & Closures Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com64

Part# Description Pck. Qty. Rib Spacing SizeFSI Ag Panel Inside Filler Strip - No Adhesive 100 9" 7/8" x 3/4" x 36"FSIGAg Panel Inside Filler Strip - With Adhesive 100 9" 7/8" x 3/4" x 36"FSOAg Panel Outside Filler Strip - With Adhesive 100 9" 7/8" x 3/4" x 36"FSOVAg Panel Vented Outside Filler Strip - With Adhesive 50 9" 1-3/4" x 3/4" x 36"FSIRPBR Panel Inside Filler Strip - No Adhesive 100 12" 7/8" x 1-1/4" x 36" FSORPBR Panel Outside Filler Strip - With Adhesive 100 12" 7/8" x 1-1/4" x 36" FSI55-V Crimp Panel Inside Filler Strip - No Adhesive 100 12" 7/8" x 1/2" x 24"FSO5V5-V Crimp Panel Outside Filler Strip - With Adhesive 100 12" 7/8" x 1/2" x 24"FSO141-1/4" Cont. Corrugated Panel Filler Strip - No Adhesive 100 1-1/4" 7/8" x 7/8" x 36"FSO252-1/2" Cont. Corrugated Panel Filler Strip - No Adhesive 100 2-1/2" 7/8" x 7/8" x 36"Foam Closure Strips• Designed to close gaps in roof & sidewall applications. Material is pre-cut to conform to metal panel congurations.Features • Applications include closing the openings at the ridge (peak of the building) or at the eave (gutter-line of a building).• 1.8 lb. Density polyethylene foam is designed to withstand harsh weather elements including moisture & ultraviolet rays. • Optional pre-applied adhesive helps to keep closure in place before roof panel is fastened.• Interlocking dovetails provide a secure end-to-end t, eliminating any potential gaps• Other proles are available. METAL TO WOOD?2222ACCESSORIES • CLOSURE AND VENTILATION CLOSURESPANEL PROFILE• Designed to close gaps in roof & sidewall applications. Material is pre-cut to conform to metal panel congurations.• Applications include closing the openings at the ridge (peak of the building) or at the eave (gutter-line of a building).• 1.8 lb. Density polyethylene foam is designed to withstand harsh weather elements including moisture & ultraviolet rays.• Optional pre-applied adhesive helps to keep closure in place before roof panel is fastened.• Interlocking dovetails provide a secure end-to-end t, eliminating any potential gaps• Other proles are available. Call ST Fastening Systems Customer Service for availability.PANEL PROFILE DESCRIPTIONPITCHOF CORRWIDTHOF STRIPHEIGHTOF CORRLENGTHOF STRIPPIECESPER CTN.WEIGHTPER CTN.3/4” Ag Rib 9” 7/8 3/4” 36” 100 6 LBS.R-Panel 12” 7/8 1-1/4” 36” 100 6 LBS.U-Panel 6” 7/8 3/4” 36” 100 6 LBS.Pro Panel II 9” 7/8 5/8” 36” 100 6 LBS.2.67” x 7/8” Corrugated 2.67” 7/8 7/8” 36” 100 6 LBS.Interlocking dovetails provide a secure end-to-end t, eliminating any potential gapsST®PHYSICAL PROPERTIES TEST METHODS REQUIREMENTDensity (lb./cf) ASTM D 3574 1.8 - 2.0110 mph Wind Driven Rain Test AS 100(A) NAAir Permeability (ft3/m./ft2 of Surface) ASTM D737 NATear Resistance (lb./in. min.) ASTM D 3574 6 machine directionASTM D 3574 11 cross directionTensile Strength (lbs/in2 min.) ASTM D 3574 60 machine directionASTM D 3574 38 cross directionCompress Force Deflection (lbs/in2 @ 25%) ASTM D 3574 5Compress Force Deflection (lbs/in2 @ 50%) ASTM D 3574 15Compression Set (% Original Thickness) ASTM D 3574 24 - 28Elongation (% min.) 124 machine direction88 Cross DirectionShore Hardness (00 Scale) ASTM 2240 51Thermal Stability (% Max) Machine Direction -2.0(24 hour @ 158oF) Cross Direction -1.0Thermal Conductivity (K Factor) ASTM C177 0.25 BTU in./F Hr oFWater Absorption (Lbs/SqFt Cut Surface) ASTM D-1667 0.04Working Temperature Range (Fo) -40 to 160Flammability AVSS 302 PassEASY 4 STEP INSTALLATIONADDITIONAL INSIDE AND OUTSIDES PROFILES ARE AVAILABLESTEP1PEEL PAPER FROM ADHESIVESTEP2FIT TO METAL PANELSTEP3FIRMLY APPLYSTEP4LINK NEW CLOSUREMETAL TO WOOD?2222ACCESSORIES • CLOSURE AND VENTILATION CLOSURESPANEL PROFILE• Designed to close gaps in roof & sidewall applications. Material is pre-cut to conform to metal panel congurations.• Applications include closing the openings at the ridge (peak of the building) or at the eave (gutter-line of a building).• 1.8 lb. Density polyethylene foam is designed to withstand harsh weather elements including moisture & ultraviolet rays.• Optional pre-applied adhesive helps to keep closure in place before roof panel is fastened.• Interlocking dovetails provide a secure end-to-end t, eliminating any potential gaps• Other proles are available. Call ST Fastening Systems Customer Service for availability.PANEL PROFILE DESCRIPTIONPITCHOF CORRWIDTHOF STRIPHEIGHTOF CORRLENGTHOF STRIPPIECESPER CTN.WEIGHTPER CTN.3/4” Ag Rib 9” 7/8 3/4” 36” 100 6 LBS.R-Panel 12” 7/8 1-1/4” 36” 100 6 LBS.U-Panel 6” 7/8 3/4” 36” 100 6 LBS.Pro Panel II 9” 7/8 5/8” 36” 100 6 LBS.2.67” x 7/8” Corrugated 2.67” 7/8 7/8” 36” 100 6 LBS.Interlocking dovetails provide a secure end-to-end t, eliminating any potential gapsST®PHYSICAL PROPERTIES TEST METHODS REQUIREMENTDensity (lb./cf) ASTM D 3574 1.8 - 2.0110 mph Wind Driven Rain Test AS 100(A) NAAir Permeability (ft3/m./ft2 of Surface) ASTM D737 NATear Resistance (lb./in. min.) ASTM D 3574 6 machine directionASTM D 3574 11 cross directionTensile Strength (lbs/in2 min.) ASTM D 3574 60 machine directionASTM D 3574 38 cross directionCompress Force Deflection (lbs/in2 @ 25%) ASTM D 3574 5Compress Force Deflection (lbs/in2 @ 50%) ASTM D 3574 15Compression Set (% Original Thickness) ASTM D 3574 24 - 28Elongation (% min.) 124 machine direction88 Cross DirectionShore Hardness (00 Scale) ASTM 2240 51Thermal Stability (% Max) Machine Direction -2.0(24 hour @ 158oF) Cross Direction -1.0Thermal Conductivity (K Factor) ASTM C177 0.25 BTU in./F Hr oFWater Absorption (Lbs/SqFt Cut Surface) ASTM D-1667 0.04Working Temperature Range (Fo) -40 to 160Flammability AVSS 302 PassEASY 4 STEP INSTALLATIONADDITIONAL INSIDE AND OUTSIDES PROFILES ARE AVAILABLESTEP1PEEL PAPER FROM ADHESIVESTEP2FIT TO METAL PANELSTEP3FIRMLY APPLYSTEP4LINK NEW CLOSUREMETAL TO WOOD?2222ACCESSORIES • CLOSURE AND VENTILATION CLOSURESPANEL PROFILE• Designed to close gaps in roof & sidewall applications. Material is pre-cut to conform to metal panel congurations.• Applications include closing the openings at the ridge (peak of the building) or at the eave (gutter-line of a building).• 1.8 lb. Density polyethylene foam is designed to withstand harsh weather elements including moisture & ultraviolet rays.• Optional pre-applied adhesive helps to keep closure in place before roof panel is fastened.• Interlocking dovetails provide a secure end-to-end t, eliminating any potential gaps• Other proles are available. Call ST Fastening Systems Customer Service for availability.PANEL PROFILE DESCRIPTIONPITCHOF CORRWIDTHOF STRIPHEIGHTOF CORRLENGTHOF STRIPPIECESPER CTN.WEIGHTPER CTN.3/4” Ag Rib 9” 7/8 3/4” 36” 100 6 LBS.R-Panel 12” 7/8 1-1/4” 36” 100 6 LBS.U-Panel 6” 7/8 3/4” 36” 100 6 LBS.Pro Panel II 9” 7/8 5/8” 36” 100 6 LBS.2.67” x 7/8” Corrugated 2.67” 7/8 7/8” 36” 100 6 LBS.Interlocking dovetails provide a secure end-to-end t, eliminating any potential gapsST®PHYSICAL PROPERTIES TEST METHODS REQUIREMENTDensity (lb./cf) ASTM D 3574 1.8 - 2.0110 mph Wind Driven Rain Test AS 100(A) NAAir Permeability (ft3/m./ft2 of Surface) ASTM D737 NATear Resistance (lb./in. min.) ASTM D 3574 6 machine directionASTM D 3574 11 cross directionTensile Strength (lbs/in2 min.) ASTM D 3574 60 machine directionASTM D 3574 38 cross directionCompress Force Deflection (lbs/in2 @ 25%) ASTM D 3574 5Compress Force Deflection (lbs/in2 @ 50%) ASTM D 3574 15Compression Set (% Original Thickness) ASTM D 3574 24 - 28Elongation (% min.) 124 machine direction88 Cross DirectionShore Hardness (00 Scale) ASTM 2240 51Thermal Stability (% Max) Machine Direction -2.0(24 hour @ 158oF) Cross Direction -1.0Thermal Conductivity (K Factor) ASTM C177 0.25 BTU in./F Hr oFWater Absorption (Lbs/SqFt Cut Surface) ASTM D-1667 0.04Working Temperature Range (Fo) -40 to 160Flammability AVSS 302 PassEASY 4 STEP INSTALLATIONADDITIONAL INSIDE AND OUTSIDES PROFILES ARE AVAILABLESTEP1PEEL PAPER FROM ADHESIVESTEP2FIT TO METAL PANELSTEP3FIRMLY APPLYSTEP4LINK NEW CLOSUREMETAL TO WOOD?2222ACCESSORIES • CLOSURE AND VENTILATION CLOSURESPANEL PROFILE• Designed to close gaps in roof & sidewall applications. Material is pre-cut to conform to metal panel congurations.• Applications include closing the openings at the ridge (peak of the building) or at the eave (gutter-line of a building).• 1.8 lb. Density polyethylene foam is designed to withstand harsh weather elements including moisture & ultraviolet rays.• Optional pre-applied adhesive helps to keep closure in place before roof panel is fastened.• Interlocking dovetails provide a secure end-to-end t, eliminating any potential gaps• Other proles are available. Call ST Fastening Systems Customer Service for availability.PANEL PROFILE DESCRIPTIONPITCHOF CORRWIDTHOF STRIPHEIGHTOF CORRLENGTHOF STRIPPIECESPER CTN.WEIGHTPER CTN.3/4” Ag Rib 9” 7/8 3/4” 36” 100 6 LBS.R-Panel 12” 7/8 1-1/4” 36” 100 6 LBS.U-Panel 6” 7/8 3/4” 36” 100 6 LBS.Pro Panel II 9” 7/8 5/8” 36” 100 6 LBS.2.67” x 7/8” Corrugated 2.67” 7/8 7/8” 36” 100 6 LBS.Interlocking dovetails provide a secure end-to-end t, eliminating any potential gapsST®PHYSICAL PROPERTIES TEST METHODS REQUIREMENTDensity (lb./cf) ASTM D 3574 1.8 - 2.0110 mph Wind Driven Rain Test AS 100(A) NAAir Permeability (ft3/m./ft2 of Surface) ASTM D737 NATear Resistance (lb./in. min.) ASTM D 3574 6 machine directionASTM D 3574 11 cross directionTensile Strength (lbs/in2 min.) ASTM D 3574 60 machine directionASTM D 3574 38 cross directionCompress Force Deflection (lbs/in2 @ 25%) ASTM D 3574 5Compress Force Deflection (lbs/in2 @ 50%) ASTM D 3574 15Compression Set (% Original Thickness) ASTM D 3574 24 - 28Elongation (% min.) 124 machine direction88 Cross DirectionShore Hardness (00 Scale) ASTM 2240 51Thermal Stability (% Max) Machine Direction -2.0(24 hour @ 158oF) Cross Direction -1.0Thermal Conductivity (K Factor) ASTM C177 0.25 BTU in./F Hr oFWater Absorption (Lbs/SqFt Cut Surface) ASTM D-1667 0.04Working Temperature Range (Fo) -40 to 160Flammability AVSS 302 PassEASY 4 STEP INSTALLATIONADDITIONAL INSIDE AND OUTSIDES PROFILES ARE AVAILABLESTEP1PEEL PAPER FROM ADHESIVESTEP2FIT TO METAL PANELSTEP3FIRMLY APPLYSTEP4LINK NEW CLOSUREMETAL TO WOOD?2222ACCESSORIES • CLOSURE AND VENTILATION CLOSURESPANEL PROFILE• Designed to close gaps in roof & sidewall applications. Material is pre-cut to conform to metal panel congurations.• Applications include closing the openings at the ridge (peak of the building) or at the eave (gutter-line of a building).• 1.8 lb. Density polyethylene foam is designed to withstand harsh weather elements including moisture & ultraviolet rays.• Optional pre-applied adhesive helps to keep closure in place before roof panel is fastened.• Interlocking dovetails provide a secure end-to-end t, eliminating any potential gaps• Other proles are available. Call ST Fastening Systems Customer Service for availability.PANEL PROFILE DESCRIPTIONPITCHOF CORRWIDTHOF STRIPHEIGHTOF CORRLENGTHOF STRIPPIECESPER CTN.WEIGHTPER CTN.3/4” Ag Rib 9” 7/8 3/4” 36” 100 6 LBS.R-Panel 12” 7/8 1-1/4” 36” 100 6 LBS.U-Panel 6” 7/8 3/4” 36” 100 6 LBS.Pro Panel II 9” 7/8 5/8” 36” 100 6 LBS.2.67” x 7/8” Corrugated 2.67” 7/8 7/8” 36” 100 6 LBS.Interlocking dovetails provide a secure end-to-end t, eliminating any potential gapsST®PHYSICAL PROPERTIES TEST METHODS REQUIREMENTDensity (lb./cf) ASTM D 3574 1.8 - 2.0110 mph Wind Driven Rain Test AS 100(A) NAAir Permeability (ft3/m./ft2 of Surface) ASTM D737 NATear Resistance (lb./in. min.) ASTM D 3574 6 machine directionASTM D 3574 11 cross directionTensile Strength (lbs/in2 min.) ASTM D 3574 60 machine directionASTM D 3574 38 cross directionCompress Force Deflection (lbs/in2 @ 25%) ASTM D 3574 5Compress Force Deflection (lbs/in2 @ 50%) ASTM D 3574 15Compression Set (% Original Thickness) ASTM D 3574 24 - 28Elongation (% min.) 124 machine direction88 Cross DirectionShore Hardness (00 Scale) ASTM 2240 51Thermal Stability (% Max) Machine Direction -2.0(24 hour @ 158oF) Cross Direction -1.0Thermal Conductivity (K Factor) ASTM C177 0.25 BTU in./F Hr oFWater Absorption (Lbs/SqFt Cut Surface) ASTM D-1667 0.04Working Temperature Range (Fo) -40 to 160Flammability AVSS 302 PassEASY 4 STEP INSTALLATIONADDITIONAL INSIDE AND OUTSIDES PROFILES ARE AVAILABLESTEP1PEEL PAPER FROM ADHESIVESTEP2FIT TO METAL PANELSTEP3FIRMLY APPLYSTEP4LINK NEW CLOSUREMETAL TO WOOD?2222ACCESSORIES • CLOSURE AND VENTILATION CLOSURESPANEL PROFILE• Designed to close gaps in roof & sidewall applications. Material is pre-cut to conform to metal panel congurations.• Applications include closing the openings at the ridge (peak of the building) or at the eave (gutter-line of a building).• 1.8 lb. Density polyethylene foam is designed to withstand harsh weather elements including moisture & ultraviolet rays.• Optional pre-applied adhesive helps to keep closure in place before roof panel is fastened.• Interlocking dovetails provide a secure end-to-end t, eliminating any potential gaps• Other proles are available. Call ST Fastening Systems Customer Service for availability.PANEL PROFILE DESCRIPTIONPITCHOF CORRWIDTHOF STRIPHEIGHTOF CORRLENGTHOF STRIPPIECESPER CTN.WEIGHTPER CTN.3/4” Ag Rib 9” 7/8 3/4” 36” 100 6 LBS.R-Panel 12” 7/8 1-1/4” 36” 100 6 LBS.U-Panel 6” 7/8 3/4” 36” 100 6 LBS.Pro Panel II 9” 7/8 5/8” 36” 100 6 LBS.2.67” x 7/8” Corrugated 2.67” 7/8 7/8” 36” 100 6 LBS.Interlocking dovetails provide a secure end-to-end t, eliminating any potential gapsST®PHYSICAL PROPERTIES TEST METHODS REQUIREMENTDensity (lb./cf) ASTM D 3574 1.8 - 2.0110 mph Wind Driven Rain Test AS 100(A) NAAir Permeability (ft3/m./ft2 of Surface) ASTM D737 NATear Resistance (lb./in. min.) ASTM D 3574 6 machine directionASTM D 3574 11 cross directionTensile Strength (lbs/in2 min.) ASTM D 3574 60 machine directionASTM D 3574 38 cross directionCompress Force Deflection (lbs/in2 @ 25%) ASTM D 3574 5Compress Force Deflection (lbs/in2 @ 50%) ASTM D 3574 15Compression Set (% Original Thickness) ASTM D 3574 24 - 28Elongation (% min.) 124 machine direction88 Cross DirectionShore Hardness (00 Scale) ASTM 2240 51Thermal Stability (% Max) Machine Direction -2.0(24 hour @ 158oF) Cross Direction -1.0Thermal Conductivity (K Factor) ASTM C177 0.25 BTU in./F Hr oFWater Absorption (Lbs/SqFt Cut Surface) ASTM D-1667 0.04Working Temperature Range (Fo) -40 to 160Flammability AVSS 302 PassEASY 4 STEP INSTALLATIONADDITIONAL INSIDE AND OUTSIDES PROFILES ARE AVAILABLESTEP1PEEL PAPER FROM ADHESIVESTEP2FIT TO METAL PANELSTEP3FIRMLY APPLYSTEP4LINK NEW CLOSUREFSIFSOFSIRFSOVFSI5VENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVentilation & ClosuresCC = Color Code * = Size65

Part# Description Height LengthABSSZBL19 Snap-Z Vented Z-Closure - Black 1-1/2" 19-1/8"ABSSZSO19 Snap-Z Vented Z-Closure - Special Order Colors 1-1/2" 19-1/8"ABSSZBL16 Snap-Z Vented Z-Closure - Black 1-1/2" 16-1/8"ABSSZSO16 Snap-Z Vented Z-Closure - Special Order Colors 1-1/2" 16-1/8"Snap an open-hemmed ridge cap in place and cut down on the amount of pop rivets required when you use the patented Snap-Z. The wide ange holds the ridge cap in place with half as many pop rivets for less potential oil canning. Plus it comes pre-punched for easy fastening and with butyl tape pre-applied to save time.Features • Requires only 3 pairs of pop rivets per 10 feet of ridge cap• Made with 26 Gauge Steel• Precut for simpler installation• Stocked in black• Pre-punched for easy fastening• Pre-applied butyl tapeSnap-ZBEFORE AFTERPre-applied butyl tapePre-punched fastner slotsTHE ONLY VENTED Z-CLOSURE YOU'LL EVER NEED!VENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVentilation & Closures Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com66

Part# DescriptionSL* Custom Made Steel LouverSLTTriangular- Custom Made LouversSteel LouversLouvers serve the double purpose of enabling airow while keeping out pests, and accenting the appearance of the structure. Wood louvers have been a popular choice for centuries, but require constant maintenance to keep from rotting. Now you can enjoy the function of wood louvers, but without the maintenance when you get the Painted-Steel Louvers. Each louver is handmade by an in-house craftsman and is customized to the size you specify and available in all our painted steel colors. Because it is custom made, you can get it to t an existing opening.Features • Custom made to size in various styles• Made with integral J-channel for new construction• Made without integral J-channel for retrotting• 2" between louvers with 1" face• 2-½" boarder• 1" depth• Size is measured from edge of visible face (including intergral J)Inverse Double ArchRectangleTrianglePeaked RectangleConcave ArchCustom Decorative TopDome Peak Inverse ArchCommon DesignsInverse Double ArchRectangleTrianglePeaked RectangleConcave ArchCustom Decorative TopDome Peak Inverse ArchVENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVentilation & ClosuresCC = Color Code * = Size67

Part# DescriptionSizeSOSVcc12 Vented Steel Soft 12" Wide x 12" Overhang Triple Four 12" x 11.5"SOSVccLF Vented Steel Soft 12" Wide Custom Length Triple Four 12" xSOSScc12 Solid Steel Soft 12" Wide x 12" Overhang Triple Four 12" x 11.5"SOSScc18 Solid Steel Soft 12" Wide x 18" Overhang Triple Four 12" x 17.5"SOSSccLF Solid Steel Soft 12" Wide Custom Length Triple Four 12" x Painted Steel SotIn order for the hot air to escape out of the ridge vent, fresh air needs to enter the building from somewhere, and our vented steel sot allows the correct amount of fresh air to equalize the air pressure caused by the escaping heat. Our 29 gauge solid and vented steel sot is available in over 45 of our metal colors. It's stocked in standard lengths, and available in custom lengths from 1.5' to 24'.Features • Color-matched to our metal panel colors.• Heavy-duty 29 gauge steel.• Vented stocked in 12" wide coverage by 11.5" for 12" overhang. • Solid made to order from 1.5 feet to 24 feet.Vinyl Sot Part# Description Box Qty. Cvg. LengthVSCVWH Vinyl Soft - Center Vent - White - Mastic 16 12” 12’VSSWH Vinyl Soft - Solid - White - Mastic 16 12” 12’CENTER VENTSOLIDWHITEVENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVentilation & Closures Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com68DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Part# DescriptionSizeSOA12CVSO Holmes Center Vented Alum. Soft - Specify color 12" x 12'SOA12D6SSC Holmes D/6 V Groove Solid Alum. Soft - Specify color 12" x 12'SOA12D6VSC Holmes D/6 V Groove Full Vented Alum. Soft - Specify color 12" x 12'SOA12FVSO Holmes FUL Vented Alum. Soft - Specify color 12" x 12'SOA12SSO Holmes SOLID S Alum. Soft - Specify color 12" x 12'SOA12SW White Holmes D/6 V Grove Solid Alum. Soft 12" x 12'SOA12VW White Holmes D/6 V Groove Full Vented Alum. Soft 12" x 12'SOAMWIFC Pcs, 3/8" Steel F Channel [25pcs/Box] - Specify color 12" x 12'SOAMWISO Vented Center or full Vent Alum. Soft - Specify color 16" x 144"Aluminum SotFeatures • Available in prepainted steel or aluminum• Precut lengths (12” or 24” standard)• Full-vent, center-vent or solid panels• 12” CV panel provides 7.5 sq. in. of free area per ft.• 12” FV panel provides 15 sq. in. of free area per ft.• 24” CV panel provides 15 sq. in. of free area per ft.• 24” FV panel provides 30 sq. in. of free area per ft.FULL-VENTCENTER-VENTSOLID SOFFITSOFFIT & TRIMSYSTEMSCombined F/J Soft Trim“F” receives soft panel or ceiling liner panel“J” receives metal siding-the painted surface is exposed so you never see primer16” coverageprepainted soft panelsSoffit & Trim Systems.indd 2-3Soffit & Trim Systems.indd 2-3 12/30/19 4:18 PM12/30/19 4:18 PM*Other colors available for special order.MODEL NUMBER DESCRIPTION LENGTHPIECES PER CARTONVIEWS144S144A144” LONG - 16” WIDE COVERAGESOFFIT PANEL - STEELSOFFIT PANEL - ALUMINUM 144”144”1212S1200S1200A11.75” LONG - 16” WIDE COVERAGESOFFIT PANEL - STEELSOFFIT PANEL - ALUMINUM 11.75”11.75”5 or 305 or 30S2400S2400A23.75” LONG - 16” WIDE COVERAGESOFFIT PANEL - STEELSOFFIT PANEL - ALUMINUM 23.75”23.75”5 or 155 or 15SPECIAL CUT LENGTHS AVAILABLE! SIZES RANGE FROM 7” TO 144.” PLEASE CALL FOR DETAILS!• Available in prepainted steel or aluminum• Precut lengths (12” or 24” standard)• Full-vent, center-vent or solid panels• 12” CV panel provides 7.5 sq. in. of free area per ft.• 12” FV panel provides 15 sq. in. of free area per ft.• 24” CV panel provides 15 sq. in. of free area per ft.• 24” FV panel provides 30 sq. in. of free area per ft.ALUMINUM".VENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVENTILATION & CLOSURESVentilation & ClosuresCC = Color Code * = Size69

PVC CEILING & WALL PANELS

What is it?Designed with a high-strength polymer formulation, Trusscore® Wall&CeilingBoard™ is engineered to be the perfect alternative to traditional FRP and drywall systems. Trusscore’s tongue and groove interlocking system makes installation quick and easy, and the unique truss design provides industry leading strength and durability.Who likes it?Homeowners love it because of the easy-to-clean and high-durability design that makes it perfect for garages, sheds, horse barns, and wash baysContractors love it because of the fast and clean installation and great warranty.Who are we?Red Dot Products is a regional distributor that supplies lumber yards, building supply companies, and metal rollformers with high-demand building supplies. Let us be your warehouse and grow your business!Become a Trusscore Dealer!We can help you reach more customers as a stocking or non-stocking Trusscore dealer.Scan to learn more!Get a quote:833-473-3368Trusscore Wall&CeilingBoard is lightweight, low maintenance, and lasts a lifetimeDesigned with a high-strength polymer formulation, Trusscore Wall&CeilingBoard is the perfect, sustainable alternative to traditional drywall and fiberglass reinforced plastic (FRP) systems.PVC Ceiling & Wall PanelsCC = Color Code * = Size71

Wherever you need a smooth finish that is easy to clean, low-maintenance, and abuse-resistant, TRUSSCORE PVC Wall&CeilingBoard has your project covered. The panels are 16” wide, ½” thick, and come in standard lengths of: 8’, 10’, 12’, 14’, 16’, and 20’ (custom lengths are also available). Trusscore’s unique tongue-and-groove interlocking system makes both vertical and horizontal installation quick and easy.Stocked in White (W) and Grey (G).Features • Trusscore Wall&CeilingBoard is an ideal drywall replacement that is easy to use, easy to clean, and doesn’t yellow or fade• Unique high strength truss design provides outstanding spanning capability. It can support attic insulation loads.• Highly durable surface that is resistant to scratches, bacteria, chemicals, mold, and moisture.• Class A Fire Rating - ame spread index of 15, as per ASTM E84-18.Part# Description Coverage LengthTRUSSCORE Wall&CeilingBoardTCCC8 TrussCore Wall&CeilingBoard PVC Liner Panel - 1/2” Thick 16” 8’TCcc10 TrussCore Wall&CeilingBoard PVC Liner Panel - 1/2” Thick 16” 10’TCcc12 TrussCore Wall&CeilingBoard PVC Liner Panel - 1/2” Thick 16” 12’TCcc14 TrussCore Wall&CeilingBoard PVC Liner Panel - 1/2” Thick 16” 14’TCcc16 TrussCore Wall&CeilingBoard PVC Liner Panel - 1/2” Thick 16” 16’TCcc20 TrussCore Wall&CeilingBoard PVC Liner Panel - 1/2” Thick 16” 20’PVC CEILING & WALL PANELSPVC CEILING & WALL PANELSPVC Ceiling & Wall Panels Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com72

J ChannelTCccJTRIM1/2” Cove with 3/4” FaceInside/Outside Corner - RoundedTCccIOCTRIMOutside CornerTCccOC*TRIM1-1/4’’ x 1-1/4’’ | 2” x 2”Base TrimTCccBTRIM1-1/4’’ x 7/8’’ x 1/4” FaceInside CornerTCccICTRIM1/2” CoveF TrimTCccFTRIM1/2” CoveH DividerTCWH2PTRIM1/2” Coves with 1-1/2” Face45 H DividerTCccHTRIM451/2” Coves with 1-1/2” or 2-22/32” Face Part# Description LengthTrusscore TrimsTCccICTRIM Trusscore PVC Inside Corner Trim - 1/2” Cove 10’TCccBTRIM Trusscore PVC Base Trim - 1-1/4’’ x 7/8’’ x 1/4” Face 10’TCccIOCTRIM Trusscore PVC Inside/Outside Corner - Rounded 10’TCccJTRIM Trusscore PVC J Channel - 1/2” Cove with 3/4” Face 10’TCccOCSTRIM Trusscore PVC Small Outside Corner - 1-1/2’’ x 1-1/2’’ 10’TCccOCLTRIM Trusscore PVC Large Outside Corner - 2’’ x 2’’ 10’TCccHTRIM Trusscore PVC H Divider - 1/2” Coves with 1-1/2” Face 10’TCccHTRIM45 Trusscore PVC 45 Degree H Divider with 1-1/2” or 2-22/32” Face 10’TCccFTRIM Trusscore PVC F Trim - 1/2” Cove 10’STOCKED IN WHITE AND GREYPVC CEILING & WALL PANELSPVC CEILING & WALL PANELSPVC Ceiling & Wall PanelsCC = Color Code * = Size73

Whether installed in a commercial or a do-it-yourself project, Trusscore SlatWall will add value and functionality to any space you choose. Made from a high-strength polymer formulation, the Trusscore SlatWall system supports weights up to 75lbs per square foot and is designed to install seamlessly with Trusscore Wall&CeilingBoard. It is the perfect organizational alternative to traditional drywall and slatwall solutions. If you’re looking for an organized, accessible solution, the Trusscore SlatWall system is easy to install and has many dierent available hooks for your storage needs.Part# Description Coverage LengthPart# Description Size LengthSlatWallTCWSW Trusscore SlatWall PVC Interlocking Panels - 1/2” Thick - White 6” 8’TCGSW Trusscore SlatWall PVC Interlocking Panels - 1/2” Thick - Gray 6” 8’TCWSWCAP Trusscore SlatWall PVC Top Cap - White 5/8” x 1-5/16” 8’TCGSWCAP Trusscore SlatWall PVC Top Cap - Gray 5/8” x 1-5/16” 8’TCWSWJ34 Trusscore SlatWall PVC 3/4” J - White 1-3/8” x 3/4” x 13/16” 10’TCGSWJ34 Trusscore SlatWall PVC 3/4” J - Gray 1-3/8” x 3/4” x 13/16” 10’SlatWall TrimsTop Cap¾” JTrusscore SlatWall is available in 8' lengths.Custom lengths are available upon request.WhiteGrayAvailable in white and gray.Learn more about Trusscore SlatWall Start the conversation today with one of our sales representatives. hello@trusscore.com | 1.888.418.4679 | www.trusscore.com/slatwallCopyright © 2022 Trusscore Inc. Trusscore and Trusscore SlatWall are trademarks of Trusscore Inc. Specications are subject to change. T-PS102-008 02/2022Technical SpecicationsBoard DimensionsSlatWall Trims and FlashingCombine Trusscore Wall&CeilingBoard seamlessly with Trusscore SlatWall.3/4" J TrimH Channel Snap-In KitTop Cap7-1/4"(18.42 cm)8'(243.84 cm)Exposed face6" (15.24 cm)5/8"(1.59 cm) Features and Benets• Highly durable surface that is resistant toscratches, bacteria, chemicals, mold, andmoisture• Supports weights up to 75 lbs per squarefoot• Easy to install and easy to clean• Long-lasting and cost-eective• Can be used for new construction orretrot• Hidden fasteners• Highly resistant to chemicals andunaected by moisture• Bright clean appearance• Can be combined with TrusscoreWall&CeilingBoards for a completewallboard system• Available in white and gray• Made in North AmericaTrusscore® SlatWall™ is a heavy-duty, easy-to-install solution to organize your home, oce, or workspaceWhether installed in a commercial or a do-it-yourself project, Trusscore SlatWall will add value and functionality to any space you choose. Made from a high-strength polymer formulation, the Trusscore SlatWall system supports weights up to 75 lbs per square foot and is designed to install seamlessly with Trusscore Wall&CeilingBoard. It is the perfect organizational alternative to traditional drywall and slatwall solutions. If you're looking for an organized, accessible solution, the Trusscore SlatWall system is easy to install and has many dierent available hooks for your storage needs. Trusscore SlatWall is compatible with standard slatwall accessories and the Trusscore accessories below. 18" Basket | CRO.P18Bike Hook | CRO.V 4" and 6" Double HookCRO.D4 | CRO.D624" Shelf | CRO.T24Hose Hook | CRO.H4" and 6" Simple HookCRO.S4 | CRO.S6SlatWall organization and storage system SlatWallPROUDLYMADE INCANADAAND USAPVC CEILING & WALL PANELSPVC CEILING & WALL PANELSPVC Ceiling & Wall Panels Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com74

Ag-Tuf®/ Ag-Tuf® UVAg-Tuf® corrugated PVC liner panel allows efficient cladding of structures with many benefits for all types of agricultural professionals. From hog barns to dairy sheds, from poultry houses to wineries and more, Ag-Tuf® and Ag-Tuf® UV hold up where other products won’t. Ag-Tuf®’s resistance to chemicals allows for frequent cleaning and sanitary maintenance, as well as extended service in harsh chemical environments.Ag-Tuf® panels are extremely easy to install and maintain using ordinary tools, while preserving its attractive glossy appearance over a long period of time.Ag-Tuf® carries a 10-Year Manufacturer’s Limited Warranty. Ag-Tuf® UV carries a 5-Year Limited Warranty.38"36" Coverage1 3/4"9"1/2"3/4"2 3/4"1/8"36" Coverage3"1"38" Actual Width5/8"Ag-Tuf UV 9”Ag-Tuf Square WavePart# Description Thickness Coverage LengthPart# Description Thickness Coverage LengthATWH8 White PVC Ag-Tuf - 3’’ Rib Centers - 3/4’’ High .8 mm 36” 8’-2”ATWH10 White PVC Ag-Tuf - 3’’ Rib Centers - 3/4’’ High .8 mm 36” 10’-2”ATWH12 White PVC Ag-Tuf - 3’’ Rib Centers - 3/4’’ High .8 mm 36” 12’-2”ATWH14 White PVC Ag-Tuf - 3’’ Rib Centers - 3/4’’ High .8 mm 36” 14’-2”ATWH16 White PVC Ag-Tuf - 3’’ Rib Centers - 3/4’’ High .8 mm 36” 16’-4”ATWH20 White PVC Ag-Tuf - 3’’ Rib Centers - 3/4’’ High .8 mm 36” 20’-4”ATHWH8 White PVC Ag-Tuf UV - 9’’ Rib Centers - 3/4’’ High 1mm 36” 8’-2”ATHWH10 White PVC Ag-Tuf UV - 9’’ Rib Centers - 3/4’’ High 1mm 36” 10’-2”ATHWH12 White PVC Ag-Tuf UV - 9’’ Rib Centers - 3/4’’ High 1mm 36” 12’-2”ATHWH14 White PVC Ag-Tuf UV - 9’’ Rib Centers - 3/4’’ High 1mm 36” 14’-2”ATHWH16 White PVC Ag-Tuf UV - 9’’ Rib Centers - 3/4’’ High 1mm 36” 16’-4”ATHWH20 White PVC Ag-Tuf UV - 9’’ Rib Centers - 3/4’’ High 1mm 36” 20’-4”Ag-Tuf® UV 9” Rib SpacingAg-Tuf® 3” Rib SpacingPVC CEILING & WALL PANELSPVC CEILING & WALL PANELSPVC Ceiling & Wall PanelsCC = Color Code * = Size75

Part# Description Size LengthPart# Description Size LengthPart# Description Size LengthATWJ PVC Ag-Tuf J-Channel - White 7/8” x 2” 10’ ATWIC PVC Ag-Tuf Inside Corner or F&J-Channel - White 1-3/4” x 2-3/4” 10’ ATWBT PVC Ag-Tuf Base Trim - White 10’ AgTuf J ChannelAgTuf Inside Corner/F&J ChannelAgTuf Base TrimPart# Description Thickness SizeSKFS Clear Polycarbonate Flat Sheet - UV 1 Side 1mm / .039” 4’ x 8’ SKFS10 Clear Polycarbonate Flat Sheet - UV 1 Side 1mm / .039” 4’ x 10’ SKFS12 Clear Polycarbonate Flat Sheet - UV 1 Side 1mm / .039” 4’ x 12’ SKFS83 Clear Polycarbonate Flat Sheet - UV Both Side 3mm / .118” 4’ x 8’ SKFS84.5 Clear Polycarbonate Flat Sheet - UV Both Side 4.5mm / .177” 4’ x 8’SKFS85.6 Clear Polycarbonate Flat Sheet - UV Both Side 5.6mm / .220” 4’ x 8’Polycarbonate Flat SheetPVC CEILING & WALL PANELSPVC CEILING & WALL PANELSPVC Ceiling & Wall Panels Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com76

SKYLIGHTS & SIDELIGHTS

SKRLP Clear Polycarbonate Skylight Ridge Light 24” 10’-6”SKRLPWH White Opal Polycarbonate Skylight Ridge Light 24” 10’-6”9” Rib Skylight RidgecapPart# Description Coverage LengthSKCD8 Clear Polycarbonate Skylight For Everdrain Prole 6” Ribs 36” 8’SKCD10 Clear Polycarbonate Skylight For Everdrain Prole 6” Ribs 36” 10’SKCD12 Clear Polycarbonate Skylight For Everdrain Prole 6” Ribs 36” 12’9” Rib SkylightEverdrain SkylightSunsky® SkylightsSunSky corrugated polycarbonate panels stand up to punishing exterior applications and oer multiple advantages over traditional berglass corrugated panels. SunSky provides up to 20 times greater impact resistance, warranted protection against yellowing, excellent load ratings, and the highest resistance to wind uplift–outstanding properties conrmed by independent laboratory tests and in installations worldwide since 1984. SunSky is available in soft white for maximum light transmission without glare, as well as clear and a range of colors to lter light or reduce heat loads.NOTICE: To prevent cracking caused by expansion and contraction, all skylights should be pre-drilled. For panels longer than 12’, pre-drill panels at all fastening points with a ⁄” hole to allow for increased expansion and contraction due to longer length. For panels 12’ in length or less, pre-drill a hole ⁄” larger than the diameter of the fastener shank. Palram recommends that SunSky panels are not installed below 40°F or above 80°F. For best results, use screws designed for polycarbonate with a ¾” (19mm) washer - large enough to seal the pre-drilled hole and to allow for movement. SKSTCL8 Clear Polycarbonate Skylight - 90% Light Transmission 36” 8’SKSTCL10 Clear Polycarbonate Skylight - 90% Light Transmission 36” 10’SKSTCL12 Clear Polycarbonate Skylight - 90% Light Transmission 36” 12’SKSTCL14 Clear Polycarbonate Skylight - 90% Light Transmission 36” 14’SKSTCL16 Clear Polycarbonate Skylight - 90% Light Transmission 36” 16’SKSTSW8 Soft White Polycarbonate Skylight - 85% Light Transmission 36” 8’SKSTSW10 Soft White Polycarbonate Skylight - 85% Light Transmission 36” 10’SKSTSW12 Soft White Polycarbonate Skylight - 85% Light Transmission 36” 12’SKSTSW14 Soft White Polycarbonate Skylight - 85% Light Transmission 36” 14’SKSTSW16 Soft White Polycarbonate Skylight - 85% Light Transmission 36” 16’SKSTWH8 White (Opal) Polycarbonate Skylight - 45% Light Transmission 36” 8’SKSTWH10 White (Opal) Polycarbonate Skylight - 45% Light Transmission 36” 10’SKSTWH12 White (Opal) Polycarbonate Skylight - 45% Light Transmission 36” 12’SKSTSG12 Solar Gray Polycarbonate Skylight - 35 % Light Transmission 36” 12’Part# Description Coverage LengthPart# Description Coverage LengthCLEAR - 90% LIGHT TRANSMISSIONSOFT WHITE - 85% LIGHT TRANSMISSIONWHITE (OPAL) - 45% LIGHT TRANSMISSIONSOLAR GRAY - 35% LIGHT TRANSMISSION38” Overall36” Coverage6”½”SKYLIGHTS & SIDELIGHTSSKYLIGHTS & SIDELIGHTSSkylights & Sidelights Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com78

S1415P #14 Galvanized Screws w/ 3/4” Washer - to Wood 1.5”SD1415P #14 Galvanized Self-Drilling Screws w/ 3/4” Washer - to Metal 1.5”8150 8150 Geocel Construction Silicone - Clear 10 oz.Polycarbonate ScrewsGeocel 8150 Skylight CaulkPart# Description LengthPart# Description SizeS1415PSD1415PSK5V8 5V Crimp Skylight For 24” Coverage Clear Polycarbonate 24” 8’SK5V12 5V Crimp Skylight For 24” Coverage Clear Polycarbonate 24” 12’SKCOR125 Clear Polycarbonate Skylight 1.25” Corrugated 24” 12’SKSTRCL8 Clear Polycarbonate Skylight 1mm Thick 12” Rib Spacing 36” 8’SKSTRCL10 Clear Polycarbonate Skylight 1mm Thick 12” Rib Spacing 36” 10’SKSTRCL12 Clear Polycarbonate Skylight 1mm Thick 12” Rib Spacing 36” 12’SKSTRSW12 Soft White Polycarbonate PBR 85% Light Transmission 36” 12’SKSTRW12 White (Opal) Polycarbonate PBR 12” Ribs 36” 12’5V Crimp Skylight1-¼” Corrugated SkylightPBR SkylightPart# Description Coverage LengthPart# Description Coverage LengthPart# Description Coverage Length26 ½” Overall1 ¼”¼”⁄”24” Coverage26” Overall12”½”½”1”1”24” CoverageTo prevent cracking caused by expansion and contraction, all skylights should be pre-drilled. For panels longer than 12’, pre-drill panels at all fastening points with a ⁄” hole to allow for increased expansion and contraction due to longer length. For panels 12’ in length or less, pre-drill a hole ⁄” larger than the diameter of the fastener shank. Palram recommends that SunSky panels are not installed below 40°F or above 80°F. For best results, use screws designed for polycarbonate with a ¾” (19mm) washer - large enough to seal the pre-drilled hole and to allow for movement. To prevent deterioration of the polycarbonate skylights and for proper adhesion, use only 100% silicone caulk like Geocel’s 8150.Note: Not a perfect match for our rollformed 1-1/4” Corrugated.SKYLIGHTS & SIDELIGHTSSKYLIGHTS & SIDELIGHTSSkylights & SidelightsCC = Color Code * = Size79

Multi WallMulti Wall TrimSK6H 6mm H Channel Clear for Multi-Wall connector/divider 12’SK6J 6mm J Cap Clear Polycarbonate for Multi-Wall 12’SK8H 8mm H Channel Clear for Multi-Wall connector/divider 12’SK8J 8mm J Cap Clear Polycarbonate for Multi-Wall 12’Multi-WallPart# Description Coverage LengthPart# Description LengthSKSM648 6mm (1/4”) Multi-Wall Polycarbonate 4’ 8’SKSM6410 6mm (1/4”) Multi-Wall Polycarbonate 4’ 10’SKSM6412 6mm (1/4”) Multi-Wall Polycarbonate 4’ 12’SKSM848 8mm (5/16”) Multi-Wall Polycarbonate 4’ 8’SKSM8410 8mm (5/16”) Multi-Wall Polycarbonate 4’ 10’SKSM8412 8mm (5/16”) Multi-Wall Polycarbonate 4’ 12’8MM8MM6MM6MMSKYLIGHTS & SIDELIGHTSSKYLIGHTS & SIDELIGHTSSkylights & Sidelights Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com80

HOUSE WRAP & UNDERLAYMENT

Part# Description CoversPart# Description SizeIFP15 15# Warrior Felt Paper 4 sq.IFP30 30# Warrior Felt Paper 2 sq.IIWS2 High Temperature Synthetic Ice & Water Protector - Epilay Plystik 36” x 66.7’Warrior Felt PaperIce & Water Protector Underlayment• Great for metal roofsPart# Description SizePart# Description SizePart# Description SizeIHWR House Wrap - Rexwrap Plus 9’ x 100’IHWTS Stucco Wrap - Tyvek 5’ x 200’IHWT House Wrap - Tyvek 9’ x 100’IHWT10 House Wrap - Tyvek 10’ x 100’Rexwrap Plus House WrapTyvek® StuccoWrap®Tyvek® House WrapTyvek® StuccoWrap® WRB has an engineered, grooved surface that is designed to be installed as a drainage plane behind stucco facades and EIFS systems.• 10-year limited warranty from DuPont.• Superior water management that promotes stronger facades.Unique material science helps prevent the inltration of air and water, but lets water vapor escape to prevent rot and mold inside walls.• 10-year limited warranty from DuPont• Easy to installSA-250HOUSE WRAP & UNDERLAYMENTHOUSE WRAP & UNDERLAYMENTHouse Wrap & Underlayment Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com82

Part# Description Size CoversPart# Description Size CoversPart# Description Size CoversPart# Description Size CoversPart# Description Size CoversIIWGH Henry Eaveguard Shingle Underlayment (Blue Roll ) 36” x 65’ 195 sqftIULE Elephant Skin Synthetic Underlayment 48” X 250’ 10 sq.IUL30 Tyvek Protec 120 Synthetic Roong Underlayment 48” X 250’ 10 sq.IULP Tyvek Roof Protector Synthetic Roong Underlayment 42” X 286’ 10 sq.IUL40 Tyvek Protec 160 Synthetic Roong Underlayment 48” X 250’ 10 sq.Henry Eveguard Shingle UnderlaymentElephant Skin Synthetic Roong UnderlaymentTyvek® Protec™ 120DuPont® Roof ProtectorTyvek® Protec™ 160• .ASTM D226 & D4869 approved• One of the best anti-slip surfaces on the market• 180 day UV exposure• Temp -30° to 220° FahrenheitDuPont™ Tyvek® Protec™ engineered synthetic roong underlayments oer high-performance with a variety of roong materials, from metal roong to asphalt shingles. The unique embossed pattern allows for better traction and grip while walking on the roof. The bottom layer includes a slip-resistance coating providing grip to the roof deck. Accepts and holds chalk marks for more visible lines and a better-nished product. 3-month UV exposure and 40-year warranty with Class “A” re rating per ASTM E108.DuPont Roof Protector preserves the roof deck during installation, and with a high strength to weight ratio provides a lightweight yet durable barrier against water. Unlike other value synthetics, DuPont Roof Protector is much less prone to wind pull-up and tearing at fastener points during installation. With its slip-resistant surface, DuPont Roof Protector is ideal for steep slopes under asphalt shingle and metal panel roof materials. 90-day UV resistance, and 20-year limited warranty with Class “A” re rating per ASTM E108.Tyvek® Protec™ 160 is an engineered synthetic roong underlayment with industry-leading walkability from DuPont. Ideal for slopes 2:12 or higher under a variety of roong materials in repair, re-roong and new construction. The unique embossed pattern allows for better traction and grip while walking on the roof. The bottom layer includes a slip-resistance coating providing grip to the roof deck. Accepts and holds chalk marks for more visible lines. 6-month UV exposure and 40-year warranty with Class “A” re rating per ASTM E108.• Split face backer• Meets ASTM D1970• Works for metal• GranulatedHOUSE WRAP & UNDERLAYMENTHOUSE WRAP & UNDERLAYMENTHouse Wrap & UnderlaymentCC = Color Code * = Size83

Part# Description SizePart# Description SizePart# Description SizePart# Description SizeIWWF6T Flexwrap Self-adhering Flashing Tape for Curved Windows 6” x 75’IWWF3T Flexwrap Self-adhering Flashing Tape for Pipes 2.75” x 15’IHWTAPE Tyvek House Wrap Tape - 2” 2” x 165’IHWTAPE3 Tyvek House Wrap Tape - 3” 3” x 165’IPS12 Peel & Seal - Aluminum Coated 12” x 33’IPS18 Peel & Seal - Aluminum Coated 18” x 33’IPS36 Peel & Seal - Aluminum Coated 36” x 33.5’IPS4 Peel & Seal - Aluminum Coated 4” x 33’IPS6 Peel & Seal - Aluminum Coated 6” x 33’IPS9 Peel & Seal - Aluminum Coated 9” x 33’IPSW12 Peel & Seal - White Coated 12” x 33’IPSW36 Peel & Seal - White Coated 36” x 33’Tyvek® Flashing TapeTyvek® FlexWrap Flashing TapeTyvek® House Wrap TapePeal & SealPart# Description SizeIWW4 Window Wrap Self-adhering Flashing Tape for Window/Door 4” x 75’IWW6 Window Wrap Self-adhering Flashing Tape for Window/Door 6” x 100’Window Wrap Flashing TapeIWW4T Window Flashing Tape Tyvek Brand 4” x 75’IWW6T Window Flashing Tape Tyvek Brand 6” x 75’Peel & Seal is the original, patented self-stick roll roong. Peel & Seal is ideal for roofs and surfaces that are dicult to waterproof and can be used on many surfaces including: metal roofs, mobile homes, RVs or trailers, and sunroofs. Peel & Seal can also be used as ashing around ducts, vents, chimneys, air conditioning units, or even on gutters.Peel & Seal is made of aluminum composite foil, polymer lms, and a rubberized asphalt adhesive back, making it exible and self-adhering. It will not tear, crack or dry out over time. It is designed specically to reect heat and resist water and exposure to other elements without any additional coverage needed. It is very simple to install. HOUSE WRAP & UNDERLAYMENTHOUSE WRAP & UNDERLAYMENTHouse Wrap & Underlayment Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com84

FASTENERS

GRK Structural ScrewsPart# DescriptionCarton Qty Driver Size Size LengthSHS2-50 2" GRK Structural Screws - Climatek Coated 50 T30 1/4" 2"SHS2 2" GRK Structural Screws - Climatek Coated 800 T30 1/4" 2"SHS25-50 2-1/2" GRK Structural Screws - Climatek Coated 50 T30 #10 2-1/2"SHS25 2-1/2" GRK Structural Screws - Climatek Coated 1000 T30 #10 2-1/2"SHS318-50 3-1/8" GRK Structural Screws - Climatek Coated 50 T30 #10 3-1/8"SHS3-100 3-1/8" GRK Structural Screws - Climatek Coated 100 T30 5/16" 3-1/8"SHS3 3-1/8" GRK Structural Screws - Climatek Coated 500 T30 #10 3-1/8"SHS318 3-1/8" GRK Structural Screws - Climatek Coated 800 T30 5/16" 3-1/8"SHS35-100 3-1/2" GRK Structural Screws - Climatek Coated 100 T30 5/16" 3-1/2"SHS35 3-1/2" GRK Structural Screws - Climatek Coated 500 T30 5/16" 3-1/2"SHS4-25 4" GRK Structural Screws - Climatek Coated 25 T30 5/16" 4"SHS4-100 4" GRK Structural Screws - Climatek Coated for 100 T30 5/16" 4"SHS4 4" GRK Structural Screws - Climatek Coated for 400 T30 5/16" 4"SHS5-20 5-1/8" GRK Structural Screws - Climatek Coated 20 T30 5/16" 5-1/8"SHS5-50 5-1/8" GRK Structural Screws - Climatek Coated 50 T30 5/16" 5-1/8"SHS5 5-1/8" GRK Structural Screws - Climatek Coated 300 T30 5/16" 5-1/8"SHS6-20 6" GRK Structural Screws - Climatek Coated 20 T30 5/16" 6SHS6-50 6" GRK Structural Screws - Climatek Coated 50 T30 5/16" 6"SHS6 6" GRK Structural Screws - Climatek Coated 300 T30 5/16" 6"SHS725 7-1/4" GRK Structural Screws - Climatek Coated 200 T40 3/8" 7-1/4"SHS8 8" GRK Structural Screws - Climatek Coated 300 T40 3/8" 8"SHS10 10" GRK Structural Screws - Climatek Coated 300 T40 3/8" 10"SHS12 12" GRK Structural Screws - Climatek Coated 300 T40* 3/8" 12SHS4SS 4" GRK Structural Screws - Stainless Steel 400 T30 5/16" 4"SHS6SS 6" GRK Structural Screws - Stainless Steel 300 T30 5/16" 6"GRK Fasteners RSS screw is Climatek coated hardened steel for use in treated wood. Its sharp threads and point bite instantly into material (including hardwood), reducing the splitting eect caused by smaller shanks. Its washer type head has no sharp edges like conventional lag screws, and the added shoulder underneath the washer has the ability to center the RSS screw in predrilled hardware. Features • Ideal for ledger boards and more• Self-tapping• W-cut thread design• May be used as a lag screw alternative• 1 step install, no pre-drilling• Superior clamping force on the rst drive• 20% faster drive time• 3-⁄" - 6" screws have ⁄ diameter shank, and the 8" and 12" screws have a ⁄ diameter shank.FA ST E N E R SFA ST E N E R SFasteners Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com86

Part# DescriptionPack Qty Carton Qty SizeSL358 3-5/8" Fastenmaster LedgerLOK Hexhead Screws 50 6 Boxes 3-5/8"SL358B 3-5/8" Fastenmaster LedgerLOK Hexhead Screws 250 3-5/8"SL5 5" Fastenmaster LedgerLOK Hexhead Screws 50 6 Boxes 5"SL5B 5" Fastenmaster LedgerLOK Hexhead Screws 250 5"Part# DescriptionPack Qty Carton Qty SizeST25 2-1/2" Fastenmaster TimberLOK Hexhead Screws 50 2-1/2"ST4 4" Fastenmaster TimberLOK Hexhead Screws 50 6 Boxes 4"ST4B 4" Fastenmaster TimberLOK Hexhead Screws 250 4"ST6 6" Fastenmaster TimberLOK Hexhead Screws 50 6 Boxes 6"ST6B 6" Fastenmaster TimberLOK Hexhead Screws 250 6"ST8 8" Fastenmaster TimberLOK Hexhead Screws 50 4 Boxes 8"ST8B 8" Fastenmaster TimberLOK Hexhead Screws 250 8"ST10 10" Fastenmaster TimberLOK Hexhead Screws 50 4 Boxes 10"ST10B 10" Fastenmaster TimberLOK Hexhead Screws 250 10"LedgerLOK Screws - FastenMasterTimberLOK Heavy-Duty Screws - FastenMasterSave time, money, and labor costs. LedgerLOK is the rst fastener engineered to attach deck ledger boards to the rim board of the house with no predrilling. No need to predrill and hand-ratchet in ½ inch galvanized lags and washers. LedgerLOK also has stronger shear values than ½ inch galvanized lag screws. Plus, with LedgerLOK's smaller shank diameter, even a cordless drill (14.4 volts or higher) zips them right in, saving on battery life and additional tooling costs. Each pack size contains a free ⁄ inch driver bit. LedgerLOK fasteners are American made. Features • Manufactured in United States• Easy to use• Highly durable• Nationally code compliant ESR #1078• Head-stamped for easy code inspection• Built in washer hex-head design eliminates the need for additional washers• Costs signicantly less per piece than ½ inch galvanized lags and washers• Guaranteed corrosion resistance for the life of the project; ACQ approved Save time, money, and labor costs. TimberLOK's sharp point and aggressive threads penetrate the densest woods without predrilling and provide stronger shear values than ⁄ inch galvanized lag screws. TimberLOK's unique countersinking head design is perfect for your next wood-to-wood project, whether it be deck framing, fencing, or any post to beam connections. It’s also perfect for replacing galvanized spikes in raised ower beds, landscaping, or retaining walls. No need to predrill and sledge a spike. TimberLOK just zips right in. Each pack size contains a free ⁄ inch driver bit. TimberLOK fasteners are American made. Features • Easy to use• Highly durable• Nationally code compliant IBC/IRC ESR #1078• Head-stamped for easy code inspection• Unique tapered head countersinks easily into wood• Guaranteed corrosion resistance for the life of the project• ACQ approved FA ST E N E R SFA ST E N E R SFastenersCC = Color Code * = Size87

Part# DescriptionPack Size Diameter LengthSRC* Hex Head Concrete Screw 100 ct. 3/16" & 1/4" 1-1/4" - 6"SRCF* Flat Head Concrete Screw 100 ct. 3/16" & 1/4" 1-1/4" - 6"SCR*SS Hex Head Concrete Screw - Stainless 100 ct. 1/4" 1-1/4" - 3-3/4"SRCF*SS Flat Head Concrete Screw - Stainless 100 ct. 1/4" 1-1/4" - 3-3/4"Concrete ScrewAvailable in Blue Rustpert Coating or Stainless Steel in various sizes. Includes masonry bit.Headlok Flathead Screws - FastenMasterPart# DescriptionPack Qty Carton Qty SizeSH278 2-7/8" Fastenmaster Headlok Flathead Screws 50 6 Boxes 2-7/8"SH278B 2-7/8" Fastenmaster Headlok Flathead Screws 500 2-7/8"SH45 4-1/2" Fastenmaster Headlok Flathead Screws 50 6 Boxes 4-1/2"SH45B 4-1/2" Fastenmaster Headlok Flathead Screws 250 4-1/2"SH6 6" Fastenmaster Headlok Flathead Screws 50 6 Boxes 6"SH6B 6" Fastenmaster Headlok Flathead Screws 250 6"SNSD Spider Drive 2/pk 2Save time, money, and labor costs. HeadLOK eliminates the need to predrill and hand-ratchet in ⁄ inch galvanized lag screws in wood-to-wood projects. HeadLOK's aggressive threading and sharp gimlet point allows it to zip right into wood or OSB without predrilling. Plus, the wafer head eliminates the need for washers and oers increased pull through strength. Perfect for deck framing, stair stringers, fencing, cabinets, and more! Sizes are perfect for virtually any dimensional wood-to-wood project. HeadLOK fasteners are American made. Features • Nationally code compliant stronger design shear values than ⁄ inch lag screws• No predrilling--zips right in• Patented Spider Drive virtually eliminates cam-out• Guaranteed corrosion resistance for the life of the project; ACQ approved• Free Spider Driver bit in every package SNSDFA ST E N E R SFA ST E N E R SFasteners Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com88

Wedge Anchor - StainlessBWA12275SS Concrete Wedge Anchor Stainless 25 ct. 8 Boxes 1/2" 2-3/4"BWA38275SS Concrete Wedge Anchor Stainless 50 ct. 8 Boxes 3/8" 2-3/4"BWA12375SS Concrete Wedge Anchor Stainless 25 ct. 8 Boxes 1/2" 3-3/4"BWA38375SS Concrete Wedge Anchor Stainless 50 ct. 8 Boxes 3/8" 3-3/4"BWA12425SS Concrete Wedge Anchor Stainless 25 ct. 8 Boxes 1/2" 4-1/4"BWA385SS Concrete Wedge Anchor Stainless 50 ct. 8 Boxes 3/8" 5"BWA1255SS Concrete Wedge Anchor Stainless 25 ct. 6 Boxes 1/2" 5-1/2"BWA3455SS Concrete Wedge Anchor Stainless 10 ct. 6 Boxes 3/4" 5-1/2"BWA586SS Concrete Wedge Anchor Stainless 10 ct. 8 Boxes 5/8" 6"BWA127SS Concrete Wedge Anchor Stainless 25 ct. 6 Boxes 1/2" 7"BWA347SS Concrete Wedge Anchor Stainless 10 ct. 6 Boxes 3/4" 7"BWA387SS Concrete Wedge Anchor Stainless 50 ct. 6 Boxes 3/8" 7"BWA5885SS Concrete Wedge Anchor Stainless 10 ct. 4 Boxes 5/8" 8-1/2"Part# DescriptionCoating Pack Size Case Qty Diameter LengthPart# DescriptionPack Size Diameter LengthJHTHDB25178H Heavy-Duty Concrete Anchor 100 ct. 1/4" 1-7/8"JHTHDB25* Heavy-Duty Concrete Anchor 50 ct. 1/4" 2-3/4", 3", 3-1/2", & 4"JHTHD37* Heavy-Duty Concrete Anchor 50 ct. 3/8" 3", 4", 5", & 6"JHTHD50300H Heavy-Duty Concrete Anchor 25 ct. 1/2" 3" JHTHD50* Heavy-Duty Concrete Anchor 20 ct. 1/2" 4", 5", 6", & 8"JHTHDB62* Heavy-Duty Concrete Anchor 10 ct. 5/8" 4", 5", 6", & 8"JHTHD75* Heavy-Duty Concrete Anchor 5 ct 3/4" 5" & 8-1/2"Part# DescriptionCoating Pack Size Case Qty Diameter LengthBWA12275G Concrete Wedge Anchor Galvanized 25 ct. 8 Boxes 1/2" 2-3/4"BWA38275G Concrete Wedge Anchor Galvanized 50 ct. 8 Boxes 3/8" 2-3/4"BWA12375G Concrete Wedge Anchor Galvanized 25 ct. 8 Boxes 1/2" 3-3/4"BWA38375G Concrete Wedge Anchor Galvanized 50 ct. 8 Boxes 3/8" 3-3/4"BWA12425G Concrete Wedge Anchor Galvanized 25 ct. 8 Boxes 1/2" 4-1/4"BWA385G Concrete Wedge Anchor Galvanized 50 ct. 8 Boxes 3/8" 5"BWA1255G Concrete Wedge Anchor Galvanized 25 ct. 6 Boxes 1/2" 5-1/2"BWA586G Concrete Wedge Anchor Galvanized 10 ct. 8 Boxes 5/8" 6"BWA5812G Concrete Wedge Anchor Galvanized 10 ct. 4 Boxes 5/8" 12"Titen Heavy-Duty Concrete Anchor - ZincWedge Anchor - GalvanizedHole size required same as shaft diameter.FA ST E N E R SFA ST E N E R SFastenersCC = Color Code * = Size89

Part# DescriptionPack Size Case Qty.LengthSDWC15450-KT Structural Truss Screw - replacement for H2.5A 50 6/Carton 4-1/2"SDWC15600-KT(50) Structural Truss Screw - replacement for H2.5A 50 6/Carton 6"SDWC15600B-KT Structural Truss Screw - replacement for H2.5A 500/Bucket 6"Part# DescriptionPack Size Case Qty. LengthSDWS22300DB-R50 Exterior Structural Screw - 50 ct. 50 6/Carton 3"SDWS22300DB-RC12 Exterior Structural Screw - 12 ct. 12 10/Carton 3"SDWS22400DB-MB(250)Exterior Structural Screw - 250 ct. 250 250/Carton 4"SDWS22400DB-R50 Exterior Structural Screw - 50 ct. 50 6/Carton 4"SDWS22400DB-RC12 Exterior Structural Screw - 12 ct. 12 4"SDWS22500DB-MB(250)Exterior Structural Screw - 250 ct. 250 250/Carton 5"SDWS22500DB-R50 Exterior Structural Screw - 50 ct. 50 6/Carton 5"SDWS22500DB-RC12 Exterior Structural Screw - 12 ct. 12 10/Carton 5"SDWS22600DB-R12 Exterior Structural Screw - 12 ct. 12 10/Carton 6"SDWS22600DB-R50 Exterior Structural Screw - 50 ct. 50 6/Carton 6"SDWS22800DB-R50 Exterior Structural Screw - 50 ct. 50 6/Carton 8"SDWS22800DB-RC12 Exterior Structural Screw - 12 ct. 12 10/Carton 8"SDWS221000DB-R50 Exterior Structural Screw - 50 ct. 50 6/Carton 10"SDWS221000DB-RC12 Exterior Structural Screw - 12 ct. 12 10/Carton 10"Structural Truss Screw - Simpson Strong-TieExterior Structural Screw - Simpson Strong-TieFA ST E N E R SFA ST E N E R SFasteners Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com90

Wedge Anchor - ZincPart# DescriptionCoating Pack Size Case Qty Diameter LengthBWA38225 Concrete Wedge Anchor Zinc 50 ct. 8 Boxes 3/8" 2-1/4"BWA12275 Concrete Wedge Anchor Zinc 25 ct. 8 Boxes 1/2" 2-3/4"BWA38275 Concrete Wedge Anchor Zinc 50 ct. 8 Boxes 3/8" 2-3/4"BWA383 Concrete Wedge Anchor Zinc 50 ct. 8 Boxes 3/8" 3"BWA12375 Concrete Wedge Anchor Zinc 25 ct. 8 Boxes 1/2" 3-3/4"BWA38375 Concrete Wedge Anchor Zinc 50 ct. 8 Boxes 3/8" 3-3/4"BWA12425 Concrete Wedge Anchor Zinc 25 ct. 8 Boxes 1/2" 4-1/4"BWA34425 Concrete Wedge Anchor Zinc 10 ct. 8 Boxes 3/4" 4-1/4"BWA385 Concrete Wedge Anchor Zinc 50 ct. 8 Boxes 3/8" 5"BWA585 Concrete Wedge Anchor Zinc 10 ct. 8 Boxes 5/8" 5"BWA1255 Concrete Wedge Anchor Zinc 25 ct. 6 Boxes 1/2" 5-1/2"BWA3455 Concrete Wedge Anchor Zinc 10 ct. 6 Boxes 3/4" 5-1/2"BWA586 Concrete Wedge Anchor Zinc 10 ct. 8 Boxes 5/8" 6"BWA34625 Concrete Wedge Anchor Zinc 10 ct. 6 Boxes 3/4" 6-1/4"BWA127 Concrete Wedge Anchor Zinc 25 ct. 6 Boxes 1/2" 7"BWA347 Concrete Wedge Anchor Zinc 10 ct. 6 Boxes 3/4" 7"BWA587 Concrete Wedge Anchor Zinc 10 ct. 8 Boxes 5/8" 7"BWA3485 Concrete Wedge Anchor Zinc 10 ct. 4 Boxes 3/4" 8-1/2"BWA5885 Concrete Wedge Anchor Zinc 10 ct. 4 Boxes 5/8" 8-1/2"BWA1210 Concrete Wedge Anchor Zinc 25 ct. 4 Boxes 1/2" 10"Part# DescriptionCoating Pack Size Case Qty Diameter LengthBWAS38178 Concrete Sleeve Anchor Zinc 50 ct. 8 Boxes 3/8" 1-7/8"BWAS12225 Concrete Sleeve Anchor Zinc 25 ct. 8 Boxes 1/2" 2-1/4"BWAS123 Concrete Sleeve Anchor Zinc 25 ct. 8 Boxes 1/2" 3"BWAS383 Concrete Sleeve Anchor Zinc 50 ct. 8 Boxes 3/8" 3"BWAS124 Concrete Sleeve Anchor Zinc 25 ct. 8 Boxes 1/2" 4"BWAS384 Concrete Sleeve Anchor Zinc 50 ct. 8 Boxes 3/8" 4"BWAS58425 Concrete Sleeve Anchor Zinc 10 ct. 8 Boxes 5/8" 4-1/4"BWAS126 Concrete Sleeve Anchor Zinc 25 ct. 8 Boxes 1/2" 6"BWAS586 Concrete Sleeve Anchor Zinc 10 ct. 8 Boxes 5/8" 6"Sleeve Anchor - ZincFA ST E N E R SFA ST E N E R SFastenersCC = Color Code * = Size91

Part# DescriptionContainer Size LengthsSDST* Tan Deck Screw 1 lb, 5 lb, & 25 lb 1-1/4" - 4"Part# DescriptionLengthsSDSC* Camo Deck Screw 1-1/4" - 4"Tan Deck Screws - PrimeGuard PlusCamo Deck Screws - National NailThe PrimeGuard Plus name represents quality and value to professional contractors on jobsites across north America, including the Caribbean. First introduced in 1975, Grip-rite is now the top-selling brand of fasteners in America. Features • Rust-oleum certied lifetime guarantee against rust, including when used with treated lumber• Type 17 point reduces need to pre-drill boards• Star drive (driver bit included)Eciently constructed to ensure a superior driving force and holding power. Designed to easily penetrate surfaces and provide a clean, professional looking nish. Ideal for a variety of fastening applications. Features • Manufactured with quality materials and a solid construction• Easily penetrates surfaces• Provides a clean, professional looking nish • Ideal for treated lumberFA ST E N E R SFA ST E N E R SFasteners Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com92

CUPOLAS & WEATHERVANES

16” Cupola24” Cupola36” Cupola48” CupolaReplacement Cupola CapCUP16 16” Standard Cupola 16” x 16” 25”CUP24 24” Cupola 24” x 24” 36”CUP36 36” Cupola 36” x 36” 48”CUP48 48” Cupola 48” x 48” 61”CUPCAP Black Aluminum Cupola Top Cap with Screw Pack 4” x 4”Part# Description Size HeightPart# Description Size HeightPart# Description Size HeightPart# Description Size HeightPart# Description HeightAll cupolas are made-to-order. Please reference our color charts for cupola color options.Height measured from roof peak to cupola roof peak.All cupolas are made-to-order. Please reference our color charts for cupola color options.Height measured from roof peak to cupola roof peak.All cupolas are made-to-order. Please reference our color charts for cupola color options.Height measured from roof peak to cupola roof peak.All cupolas are made-to-order. Please reference our color charts for cupola color options.Height measured from roof peak to cupola roof peak.• Preassembled in 2 pieces for fast installation• Available with vented louvers or windows• Copper roof upgrade also available• Preassembled in 2 pieces for fast installation• Only available with vented louvers• Preassembled in 2 pieces for fast installation• Available with vented louvers or windows• Copper roof upgrade also available• Fully assembled for fast installation• Available with vented louvers or windows• Copper roof upgrade also availableCUPOLAS & WEATHERVANESCUPOLAS & WEATHERVANESCupolas & Weathervanes Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com94

46” Eagle Weathervane46” Yacht Weathervane46” Horse Weathervane46” Rooster WeathervanePart# Description Ornament Size HeightPart# Description Ornament Size HeightPart# Description Ornament Size HeightPart# Description Ornament Size HeightCUPWV46EAG Eagle Gold Bronze - Cast Aluminum Weathervane 15” L x 17” H 46”CUPWV46SAI Sailboat Gold Bronze - Cast Aluminum Weathervane 18.25” L x 13.75” H 46”CUPWV46HOR Horse Gold Bronze - Cast Aluminum Weathervane 14” L x 11.25” H 46”CUPWV46ROO Rooster Gold Bronze - Cast Aluminum Weathervane 12.5” L x 12” H 46”Painted Gold Bronze Ornament on Black Cast Aluminum.Painted Gold Bronze Ornament on Black Cast Aluminum.Painted Gold Bronze Ornament on Black Cast Aluminum.Painted Gold Bronze Ornament on Black Cast Aluminum.CUPOLAS & WEATHERVANESCUPOLAS & WEATHERVANESCupolas & WeathervanesCC = Color Code * = Size95DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

CUPWV30TRA Tractor Black - Cast Aluminum Weathervane 6” L x 8” H 30”CUPWV24ROO Rooster Black - Cast Aluminum Weathervane 6” L x 7” H 24”CUPWV30ROO Rooster Black - Cast Aluminum Weathervane 7” L x 8.5” H 30”CUPWV24HOR Horse Black - Cast Aluminum Weathervane 10” L x 7” H 24”CUPWV30HOR Horse Black - Cast Aluminum Weathervane 10.5” L x 7” H 30”Horse WeathervaneRooster Weathervane30” Sailboat Weathervane30” Pheasant Weathervane30” Tractor WeathervanePart# Description Ornament Size HeightPart# Description Ornament Size HeightPart# Description Ornament Size HeightPart# Description Ornament Size HeightPart# Description Ornament Size HeightCUPWV30SAI Sailboat Black - Cast Aluminum Weathervane 7” L x 8” H 30”CUPWV30PHE Pheasant Black - Cast Aluminum Weathervane 13.5” L x 8.75” H 30”Rust-proof cast aluminum that is painted black.Rust-proof cast aluminum that is painted black.Rust-proof cast aluminum that is painted black.Rust-proof cast aluminum that is painted black.Rust-proof cast aluminum that is painted black.CUPOLAS & WEATHERVANESCUPOLAS & WEATHERVANESCupolas & Weathervanes Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com96DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

30” Buck Weathervane30” Cow Weathervane30” Duck WeathervaneEagle Weathervane30” Pig WeathervanePart# Description Ornament Size HeightPart# Description Ornament Size HeightPart# Description Ornament Size HeightPart# Description Ornament Size HeightCUPWV30BUC Buck Black - Cast Aluminum Weathervane 9.5” L x 10.75” H 30”CUPWV30COW Cow Black - Cast Aluminum Weathervane 11” L x 7” H 30”CUPWV30DUC Duck Black - Cast Aluminum Weathervane 8” L x 11” H 30”Part# Description Ornament Size HeightCUPWV30PIG Pig Black - Cast Aluminum Weathervane 9.5” L x 5.5” H 30”CUPWV24EAG Eagle Black - Cast Aluminum Weathervane 5.5” L x 8.75” H 24”CUPWV30EAG Eagle Black - Cast Aluminum Weathervane 9.75” L x 11.25” H 30”Rust-proof cast aluminum that is painted black.Rust-proof cast aluminum that is painted black.Rust-proof cast aluminum that is painted black.Rust-proof cast aluminum that is painted black.Rust-proof cast aluminum that is painted black.CUPOLAS & WEATHERVANESCUPOLAS & WEATHERVANESCupolas & WeathervanesCC = Color Code * = Size97DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Now in StockNow in StockNow in Stock30” Antique Auto WeathervaneCountry Doctor Weathervane30” Black Lab Weathervane30” Golden Retriever WeathervanePart# Description Ornament Size HeightPart# Description Ornament Size HeightPart# Description Ornament Size HeightPart# Description Ornament Size HeightCUPWV30CAR Antique Auto Black - Cast Aluminum Weathervane 11” L x 6” H 30”CUPWV30LAB Black Lab Black - Cast Aluminum Weathervane 10.25” L x 8.5” H 30”CUPWV30GOL Golden Retriever Black - Cast Aluminum Weathervane 11.5” L x 8.5” H 30”Spear WeathervaneGet the classic look with the spear weathervane. Can be installed with or without the directionals.Part# Description Ornament Size HeightCUPWV30SPE Spear Black - Cast Aluminum Weathervane 15.5” H 30”CUPWV24DOC Country Doctor Black - Cast Aluminum Weathervane 12.5” L x 6.25” H 24”CUPWV30DOC Country Doctor Black - Cast Aluminum Weathervane 13.5” L x 6” H 30”Rust-proof cast aluminum that is painted black.Rust-proof cast aluminum that is painted black.Rust-proof cast aluminum that is painted black.Rust-proof cast aluminum that is painted black.CUPOLAS & WEATHERVANESCUPOLAS & WEATHERVANESCupolas & Weathervanes Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com98DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Flat BaseFlat Base for Copper WeathevanesClutch BaseReplacement DirectionalsCUPWVBC Clutch Base For Mounting Weathervane On Roof PeakCUPWVDNS North-South Directional for 30" WeathervaneCUPWVDEW East-West Directional for 30" WeathervaneCUPWVDNS46 North-South Directional for 46" WeathervaneCUPWVDEW46 East-West Directional for 46" WeathervaneCUPWVBF Flat Base For Mounting Weathervane On Flat SurfaceCUPWVBFC Flat Base for Copper Weathervanes (Rod-Based) Stainless Steel Powder Coated BlackPart# DescriptionPart# DescriptionPart# DescriptionPart# DescriptionPLEASE NOTE: The Flat Base comes by default with all weathervane orders. If another mounting option is desired, please specify when you place your order.Designed for attaching Copper weathervanes to the top of ABMartin Cupolas. Heavy-duty stainless steel that is powder coated black. Attaches to the top of an ABMartin Cupola and receives the ¾” weathervane rod.CUPOLAS & WEATHERVANESCUPOLAS & WEATHERVANESCupolas & WeathervanesCC = Color Code * = Size99DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

ENTRY DOORS

Kodiak Door Swing GuideAJ/Canonball Door Swing GuideSTANDING INSIDE BUILDINGSTANDING OUTSIDE BUILDINGSTANDING INSIDE BUILDINGSTANDING OUTSIDE BUILDINGSTANDING OUTSIDE BUILDINGSTANDING OUTSIDE BUILDINGSTANDING OUTSIDE BUILDINGSTANDING OUTSIDE BUILDINGTo determine OUTSWING - Face door from outside buildingDoor handing is determined when standing on the key side facing the door.Left Hinge OutswingHinges are on the left.Door opens toward you.Left Hand ReverseHinges are on the left.Door opens toward you.Right Hinge OutswingHinges are on the right.Door opens toward you.Right Hand ReverseHinges are on the right.Door opens toward you.Right Hinge InswingHinges are on the right.Door opens toward you.Right Hand InswingHinges are on the right.Door opens away from you.Left Hinge InswingHinges are on the left.Door opens toward you.Left Hand InswingHinges are on the left.Door opens away from you.To determine INSWING - Face door from inside buildingENTRY DOORSENTRY DOORSEntry DoorsCC = Color Code * = Size101

Kodiak 6 Panel Pre Hung Door with PVC JambKodiak 9 Lite Pre Hung Door with PVC JambDRWF26BL 6 Panel Pre Hung Door 4-1/2” PVC Jamb - Inswing 26 68 Left Hinge 32½” x 82¾”DRWF26BR 6 Panel Pre Hung Door 4-1/2” PVC Jamb - Inswing 26 68 Right Hinge 32½” x 82¾”DRWF28BL 6 Panel Pre Hung Door 4-1/2” PVC Jamb - Inswing 28 68 Left Hinge 34½” x 82¾”DRWF28BR 6 Panel Pre Hung Door 4-1/2” PVC Jamb - Inswing 28 68 Right Hinge 34½” x 82¾”DRWF3BL 6 Panel Pre Hung Door 4-1/2” PVC Jamb - Inswing 30 68 Left Hinge 38½” x 82¾”DRWF3BL6J 6 Panel Pre Hung Door 6-9/16” PVC Jamb - Inswing 30 68 Left Hinge 38½” x 82¾”DRWF3BLO 6 Panel Pre Hung Door 4-1/2” PVC Jamb - Outswing 30 68 Left Hinge 38½” x 82¾”DRWF3BR 6 Panel Pre Hung Door 4-1/2” PVC Jamb - Inswing 30 68 Right Hinge 38½” x 82¾”DRWF3BR6J 6 Panel Pre Hung Door 6-9/16” PVC Jamb - Inswing 30 68 Right Hinge 38½” x 82¾”DRWF3BRO 6 Panel Pre Hung Door 4-1/2” PVC Jamb - Outswing 30 68 Right Hinge 38½” x 82¾”DRWF6BL 6 Panel Pre Hung Door 4-1/2” PVC Jamb - Inswing 60 68 Left Active 75” x 82¾”DRWF6BR 6 Panel Pre Hung Door 4-1/2” PVC Jamb - Inswing 60 68 Right Active 75” x 82¾”DRWF289L 9 Lite Pre Hung Door 4-1/2” PVC Jamb - Inswing 28 68 Left Hinge 34¾” x 82¾”DRWF289R 9 Lite Pre Hung Door 4-1/2” PVC Jamb - Inswing 28 68 Right Hinge 34¾” x 82¾”DRWF39L 9 Lite Pre Hung Door 4-1/2” PVC Jamb - Inswing 30 68 Left Hinge 38½” x 82¾”DRWF39R6J 9 Lite Pre Hung Door 6-9/16” PVC Jamb - Inswing 30 68 Right Hinge 38½” x 82¾”DRWF39LO 9 Lite Pre Hung Door 4-1/2” PVC Jamb - Outswing 30 68 Left Hinge 38½” x 82¾”DRWF39R 9 Lite Pre Hung Door 4-1/2” PVC Jamb - Inswing 30 68 Right Hinge 38½” x 82¾”DRWF39L6J 9 Lite Pre Hung Door 6-9/16” PVC Jamb - Inswing 30 68 Left Hinge 38½” x 82¾”DRWF39RO 9 Lite Pre Hung Door 4-1/2” PVC Jamb - Outswing 30 68 Right Hinge 38½” x 82¾”DRWF69L 9 Lite Pre Hung Door 4-1/2” PVC Jamb - Inswing 60 68 Left Active 75” x 82¾”DRWF69R 9 Lite Pre Hung Door 4-1/2” PVC Jamb - Inswing 60 68 Right Active 75” x 82¾”Part# Description Size Handing R/O SizePart# Description Size Handing R/O SizeDRWF69RDRWF39LDRWF30BLDRWF6BRThe Kodiak Series Door features a PVC jamb and brick moulding and berglass door skin which creates a long lasting, paintable door. An excellent choice for residential, agricultural, and storage applications.• Exposed surfaces are PVC or berglass that can be painted and will not rot.• Comes with PVC brick mold.• Pre-hung for easy installation.• R-8 insulated door panels.• Prepped for lockset with a 2.75” backset.• Weatherstrip ensures weather-tight installation.• 25 year limited warranty.• Exposed surfaces are PVC or berglass that can be painted and will not rot.• Comes with PVC brick mold.• Pre-hung for easy installation.• R-8 insulated door panels.• Prepped for lockset with a 2.75” backset.• Weatherstrip ensures weather-tight installation.• 25 year limited warranty.ENTRY DOORSENTRY DOORSEntry Doors Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com102

Cannonball Fiberglass Door - #52Cannonball Steel Door - #1734D522468F #52 Fiberglass Door Blank 24 68 Universal 30⁄” x 82¾”D522468FL #52 Fiberglass Door w/ 20” x 24” Window 24 68 Left Hinge 30⁄” x 82¾”D522468FR #52 Fiberglass Door w/ 20” x 24” Window 24 68 Right Hinge 30⁄” x 82¾”D522668F #52 Fiberglass Door Blank 26 68 Universal 32⁄” x 82¾”D522668FL #52 Fiberglass Door w/ 20” x 24” Window 26 68 Left Hinge 32⁄” x 82¾”D522668FR #52 Fiberglass Door w/ 20” x 24” Window 26 68 Right Hinge 32⁄” x 82¾”D522868F #52 Fiberglass Door Blank 28 68 Universal 34⁄” x 82¾”D522868FL #52 Fiberglass Door w/ 20” x 24” Window 28 68 Left Hinge 34⁄” x 82¾”D522868FR #52 Fiberglass Door w/ 20” x 24” Window 28 68 Right Hinge 34⁄” x 82¾”D523060F #52 Fiberglass Door Blank 30 60 Universal 38⁄” x 73¾”D523060FL #52 Fiberglass Door w/ 20” x 24” Window 30 60 Left Hinge 38⁄” x 74¾”D523060FR #52 Fiberglass Door w/ 20” x 24” Window 30 60 Right Hinge 38⁄” x 74¾”D523068F #52 Fiberglass Door Blank 30 68 Universal 38⁄” x 82¾”D523068FLB #52 Fiberglass Door w/ 22” x 36” Window 30 68 Left Hinge 38⁄” x 82¾”D523068FRB #52 Fiberglass Door w/ 22” x 36” Window 30 68 Right Hinge 38⁄” x 82¾”D523668F #52 Fiberglass Door Blank 36 68 Universal 44⁄” x 82¾”D523668FLB #52 Fiberglass Door w/ 22” x 36” Window 36 68 Left Hinge 44⁄” x 82¾”D523668FRB #52 Fiberglass Door w/ 22” x 36” Window 36 68 Right Hinge 44⁄” x 82¾”D524068F #52 Fiberglass Door Blank 40 68 Universal 50⁄” x 82¾”D524068FLB #52 Fiberglass Door w/ 22” x 36” Window 40 68 Left Hinge 50⁄” x 82¾”D524068FRB #52 Fiberglass Door w/ 22” x 36” Window 40 68 Right Hinge 50⁄” x 82¾”D526068F #52 Fiberglass Door Blank 60 68 Universal 75⁄” x 82¾”D526068FLB #52 Fiberglass Door w/ 22” x 36” Window 60 68 Left Active 75⁄” x 82¾”D526068FRB #52 Fiberglass Door w/ 22” x 36” Window 60 68 Right Active 75⁄” x 82¾”D572860S #1734 Steel Door Blank w/ 1-7/8" Jam 28 60 Universal 33⁄” x 73⁄”D573060S #1734 Steel Door Blank w/ 1-7/8" Jam 30 60 Universal 37⁄” x 73⁄”Part# Description Size Handing R/O SizePart# Description Size Handing R/O Size• Ideal for installing in sliding door.• 1-¾” thick insulated rolled edge panel.• Pre-painted aluminum jamb with nailing ange jambs, header, and threshold.• Pre-hung on 3 xed-pin hinges.• Bored for 2-⁄” lockset, nylon lockset insert, and fully weather-stripped.• Screw holes pre-punched and screws included.• Embossed 26 gauge steel skin.• Universal swing (can be switched from outswing to inswing prior to installation)• All doors individually packaged.• 1-⁄” thick insulated capped edge panel with aluminum jamb, header, and threshold.• Pre-hung on 3 xed-pin hinges with universal swing.• Bored for 2-⁄” lockset, nylon lockset insert, and fully weather-stripped.• All doors individually packaged.ENTRY DOORSENTRY DOORSEntry DoorsCC = Color Code * = Size103

• Prehung on a 16 ga galvanized steel frame.• Mounted to the frame by three, 12 ga zinc plated steel 4” x 4-½” xed pin hinges.• Master frame comes weatherstripped with bulb gasket.• R-11 insulated door panels.• Universal swing (can be switched from outswing to inswing prior to installation)• Pre-hung on a 16 ga 3-½” galvanized steel frame.• 24 ga hot-dipped galvanized smooth steel panels.• ADA compliant threshold.• R-12 insulated door panels.• Door panels is strengthened with extruded aluminum reinforcing block at locations for entry lock, dead bolt, panic hardware, and closer.• High-strength internal berglass reinforced protruded stiles and rails for thermal break.• Mounted to the frame by three, 12 ga stainless steel 4” x 4-½” xed pin hinges.• Master frame comes weatherstripped with bulb gasket.• Universal swing (can be switched from outswing to inswing prior to installation)AJ R51 Series White Steel DoorsAJ 5100 Series White Commercial Steel DoorsD513068S AJ R51 White Steel Door Blank 30 68 Universal 39⁄” x 81⁄”D513068S9L AJ R51 White Steel Door w/ 22” x 30” 9 Lite Window 30 68 Left Hinge 39⁄” x 81⁄”D513068S9R AJ R51 White Steel Door w/ 22” x 30” 9 Lite Window 30 68 Right Hinge 39⁄” x 81⁄”D516068S9L AJ R51 White Steel Door w/ 22” x 30” 9 Lite Window 60 68 Left Hinge 76⁄” x 81⁄”D516068S9R AJ R51 White Steel Door w/ 22” x 30” 9 Lite Window 60 68 Right Hinge 76⁄” x 81⁄”D516068SL AJ R51 White Steel Door Blank 60 68 Left Hinge 76⁄” x 81⁄”D516068SR AJ R51 White Steel Door Blank 60 68 Right Hinge 76⁄” x 81⁄”Part# Description Size Handing R/O SizeD51003068S 5100 White Steel Door Blank 30 68 Universal 40⁄” x 81⁄”D51003068S9L 5100 White Steel Door w/ 22” x 30” 9 Lite Window 30 68 Right Hinge 40⁄” x 81⁄”D51003068S9R 5100 White Steel Door w/ 22” x 30” 9 Lite Window 30 68 Left Hinge 40⁄” x 81⁄”D5100SO Special Order AJ 5100 Door - Size and ColorPart# Description Size Handing R/O Size9 LITE9 LITEBLANKBLANKAJ Ceiling Access DoorDCAD AJ Ceiling Access Door 2’ x 4’ 22⁄” x 447⁄”Part# Description Size R/O SizeThis high performance double wall ceiling access door is for buildings with an interior ceiling liner. The white 1” thick steel door panel has a white self-ashing pre-hung aluminum frame that can be mounted in trusses 24” or 48” on center.• Hot dipped galvanized G60 steel skin• 1” thick steel door with an expanded polystyrene core.• White polyester painted steel sheet creates a seamless rigid panel with an insulating value of R6.5.ENTRY DOORSENTRY DOORSEntry Doors Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com104

ROLL TRACK SLIDING DOORS

Round Keyhole TrackPendant Bolt TrolleysDouble Truck TrolleysStrap TrolleysTCB** Round Track - 14 ga Galvanized8’, 10’, 12’, 14’, 16’, 18’, & 20’TCUR 90 Degree Track Curve With 38” Radius for Face Mount Brackets 5’TCURBH 90 Degree Track Curve With 38” Radius for Bolt Hung Track 5’T5302 Derlin Bolt Trolley 9”T53026 Derlin Bolt Trolley - 4 Way Adjustable Pendant 6-1/2”TTTR Derlin Double Truck Trolley 9”T714876 Derlin Trolley With Front & Back Strap - Includes End CapsT5330 Strap Trolleys for Round Track - Top Adjustable - Includes End CapsT5332 Side Bolt Trolley for Round TrackPart# Description SizePart# Description SizePart# Description SizePart# DescriptionKeyhole track oers versatility, strength and ease of use. This adaptable track style can be used with any sliding door variety or bracket type – and installs with a simple connection of brackets into keyholes before mounting. Features:• Keyhole Track can be utilized in both wood and metal frame construction for commercial, agriculture and metal building projects. • When paired with available Delrin wheel trolleys, Keyhole Track can manage sliding doors weighing up to 600 pounds. • Choose from a variety of bracket styles to accommodate track cover additions on doors up to 2-½” thick. • Cylindrical design allows for self-cleaning and aligning with every use, positioning trolleys in the track’s center and pushing away any dirt or debris build-up. The Pendant Bolt installs through the top of the horizontal, allowing for easy adjustment and a perfect t. For maximum exibility, the oset bolt version oers four directions of adjustment: up, down, in and out.Built to handle the heaviest sliding door panels, Double Truck Trolleys are the perfect choice for steel frame doors on Heavy Duty Tubular Track with Universal Bracketry. Features• The product design features four wheels per trolley, allowing it to support door weights up to 1200 pounds. Brackets spaced every 12” on center. • An optional plate sits just below the top girt, preventing the bolt hole from distorting.Strap Trolleys attach to the front face of wood panel doors, with bolts that go through the panel for a solid hold. TCUR TCURBHROLL TRACK SLIDING DOORSROLL TRACK SLIDING DOORSRoll Track Sliding Doors Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com106DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Universal Double BracketTCBSBD Double Side BracketPart# DescriptionThe Universal Double Bracket – an ideal choice for double track runs – allows two lengths of Heavy Duty or Keyhole track to be installed in parallel for bypass sliding doors. Features:• Like the Universal Side Bracket, the Universal Double supports doors with weights over 600 pounds. • Highly recommended for bypass sliding door congurations. • The versatile design of the bracket allows for use as an end bracket, intermediate bracket or splice collar – depending on your building project’s needs. Universal Bolt Bracket & AdaptersTCBBHB Bolt Hung Bracket 1/2” Bolt Welded to Loop BracketTSB Stud Bolts for Triangle Brackets with 2-3/8” Flat Washer 1-3/8”TTB Triangle Bracket with 2 Stud BoltsT5151FLASH Double Flashing BracketsPart# Description SizeCreated to bridge post frame components into metal building projects, the Universal Bolt Bracket allow builders to convert Keyhole Track into Bolt Hung Track functionality. Face Mount BracketsTTC Track & Cover BracketTFB Face Mount Bracket - (no cover)Part# DescriptionDesigned for use on CannonBall’s Keyhole Track line, Face Mount Brackets contain an integral rivet that interlocks into the keyhole slot. Simply tap the bracket into each slot and mount to the face of the header board.Features:• Simple assembly provides an easy way to install track on your building project. • Use 1 bracket for every 2 feet of track.Universal BracketsTCBSB Side Bracket - Not KeyholeTCBCB Ceiling Bracket - Not KeyholePart# DescriptionDesigned for use on heavy weight sliding door projects utilizing Keyhole Track varieties, Universal Side Brackets and Universal Ceiling Brackets mount easily. Features:• Universal Ceiling Brackets can be utilized to mount directly to a ceiling beam or truss for added exibility in tight spaces with limited head room. • The versatile design of these brackets allow for use as end brackets, intermediate brackets, or splice collars. • Both Universal Brackets support sliding doors with weights over 600 pounds (when used in conjunction with appropriate Heavy Duty Track and spaced every foot on center). TTC TFBTCBBHB TSBTTB T5151FLASHTCBSB TCBCBROLL TRACK SLIDING DOORSROLL TRACK SLIDING DOORSRoll Track Sliding DoorsCC = Color Code * = Size107DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Adjustable Door StopNon Adjustable Door StopJamb Mount Door StopTADJ White Adjustable Door Stop BumperTADJBG Galvanized Adjustable Door Stop BumperTDS Galvanized Non Adjustable Door Stop BumperTJMS Galvanized Jamb Mount StopPart# DescriptionPart# DescriptionPart# DescriptionPrevents door panels from opening or closing further than a predened stopping point.Prevents door panels from opening or closing further than a predened stopping pointTCBS Splice CollarTEC End Cap with BoltTCBET White Face Mount Cover End Trim - PairSplice CollarEnd CapPart# DescriptionPart# DescriptionConnects track lengths together to make a single, elongated track. NOTE: Shorter track lengths utilizing Splice Collars save on shipping and install easier than long track lengths. Attaches to open ends of track, preventing birds from nesting as well as dirt and debris build-up. NOTE: End Caps cannot be used as door stops. TECTCBETROLL TRACK SLIDING DOORSROLL TRACK SLIDING DOORSRoll Track Sliding Doors Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com108DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Door SealsTWSSR White Vinyl Weather Strip for Side Rails 1-1/4”TWSBR White Vinyl Weather Strip for #244 Bottom Rails 2”TBS Black Brush Seal Strip for #244 Bottom RailsPart# Description SizeTWSSRTWSBRTBSTJL Adjustable Jamb LatchTCL Cam LatchTPW White Door Pull HandleTPG Galvanized Door Pull HandleChain SnuggerLatchesDoor PullTCS Chain Snugger for Sliding DoorsPart# DescriptionPart# DescriptionPart# DescriptionPrevents door panels from moving or rattling when closed and tightens as the door moves. Available in several styles based on intended use. Locks doors from the inside and pulls panels tighter against the building to reduce rattle.Assists with door opening and closing; a handle attached to door panels.TJLTCLROLL TRACK SLIDING DOORSROLL TRACK SLIDING DOORSRoll Track Sliding DoorsCC = Color Code * = Size109DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Adjustable Door Guide/StopFloor Mount Door Guide/StopCenter Door GuideTDGSW White Adjustable Door Guide/StopTDGSG Galvanized Adjustable Door Guide/StopT322 Pair 322 Floor Mount GuidePart# DescriptionPart# DescriptionPart# DescriptionGuides the door along the building, reduces the amount of door sway and prevents opening or closing beyond a predened stopping point. TCDG Center Door Guide for on PostTCDGB Big Center Door Guide for on PostStay RollerTSMS Small Stay RollerHSSRB Black Adjustable Small Stay RollerTLGS Galvanized Adjustable Large Stay RollerN131524 Stay Roller With Lag and ShieldPart# DescriptionFunctions similarly to a guide rail, but recommended for Kwik Frame Door Systems or solid wood panel doors smaller than 140 sq. ft.TCDGTCDGBTLGSN131524TSMSHSSRBROLL TRACK SLIDING DOORSROLL TRACK SLIDING DOORSRoll Track Sliding Doors Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com110DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

201 Bottom Rail394 Big Bottom RailBottom Rail for GuideTBR8 White # 201 - Bottom Rail for Sliding Doors 8’TBR8B Brown # 201 - Bottom Rail for Sliding Doors 8’TBR10 White # 201 - Bottom Rail for Sliding Doors 10’TBR10B Brown # 201 - Bottom Rail for Sliding Doors 10’TBR12 White # 201 - Bottom Rail for Sliding Doors 12’TBR12B Brown # 201 - Bottom Rail for Sliding Doors 12’TBR14 White # 201 - Bottom Rail for Sliding Doors 14’TBR14B Brown # 201 - Bottom Rail for Sliding Doors 14’TBR16 White # 201 - Bottom Rail for Sliding Doors 16’TBR16B Brown # 201 - Bottom Rail for Sliding Doors 16’TBR20 White # 201 - Bottom Rail for Sliding Doors 20’TBRGB10 # 394 - Big Bottom Rail for Guide for Sliding Doors 3-1/2” 10’TBRGB12 # 394 - Big Bottom Rail for Guide for Sliding Doors 3-1/2” 12’TBRGB14 # 394 - Big Bottom Rail for Guide for Sliding Doors 3-1/2” 14’TBRGB16 # 394 - Big Bottom Rail for Guide for Sliding Doors 3-1/2” 16’TBRGB18 # 394 - Big Bottom Rail for Guide for Sliding Doors 3-1/2” 18’TBRGB20 # 394 - Big Bottom Rail for Guide for Sliding Doors 3-1/2” 20’TBRG8cc Bottom Rail for Guide for Sliding Doors - Color 8’TBRG10cc Bottom Rail for Guide for Sliding Doors - Color 10’TBRG12cc Bottom Rail for Guide for Sliding Doors - Color 12’TBRG14cc Bottom Rail for Guide for Sliding Doors - Color 14’TBRG16cc Bottom Rail for Guide for Sliding Doors - Color 16’TBRG20 Bottom Rail for Guide for Sliding Doors - White 20’Part# Description LengthPart# Description Size LengthPart# Description LengthWhite, Black (BL), Bronze (BZ), Brown (B), Evergreen (EG), and Charcoal (CH) stocked in 8’ -16’ lengths.244 Bottom RailTBRGN8 White # 244 - Bottom Rail for Sliding Doors 8’TBRGN10 White # 244 - Bottom Rail for Sliding Doors 10’TBRGN12 White # 244 - Bottom Rail for Sliding Doors 12’TBRGN14 White # 244 - Bottom Rail for Sliding Doors 14’TBRGN16 White # 244 - Bottom Rail for Sliding Doors 16’TBRGN18 White # 244 - Bottom Rail for Sliding Doors 18’TBRGN20 White # 244 - Bottom Rail for Sliding Doors 20’Part# Description LengthROLL TRACK SLIDING DOORSROLL TRACK SLIDING DOORSRoll Track Sliding DoorsCC = Color Code * = Size111DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Side RailSide Connector RailBig Side Connector Rail391 Big Side RailTSR8cc Side Rail for Sliding Doors - Color 8’TSR10cc Side Rail for Sliding Doors - Color 10’TSR12cc Side Rail for Sliding Doors - Color 12’TSR14cc Side Rail for Sliding Doors - Color 14’TSR16cc Side Rail for Sliding Doors - Color 16’TSR20 Side Rail for Sliding Doors - White 20’TCR8cc Side Connector Rail for Sliding Doors - Color 8’TCR10cc Side Connector Rail for Sliding Doors - Color 10’TCR12cc Side Connector Rail for Sliding Doors - Color 12’TCR14cc Side Connector Rail for Sliding Doors - Color 14’TCR16cc Side Connector Rail for Sliding Doors - Color 16’TSR20 Side Connector Rail for Sliding Doors - White 20’TCRB12 White - Big Side Connector Rail for Sliding Doors 3-1/2” 12’TCRB14 White - Big Side Connector Rail for Sliding Doors 3-1/2” 14’TCRB16 White - Big Side Connector Rail for Sliding Doors 3-1/2” 16’TCRB20 White - Big Side Connector Rail for Sliding Doors 3-1/2” 20’TSRB12 # 391 - Big Side Rail for Sliding Doors 3-1/2” 12’TSRB14 # 391 - Big Side Rail for Sliding Doors 3-1/2” 14’TSRB16 # 391 - Big Side Rail for Sliding Doors 3-1/2” 16’TSRB20 # 391 - Big Side Rail for Sliding Doors 3-1/2” 20’Part# Description LengthPart# Description LengthPart# Description Size LengthPart# Description Size LengthWhite, Black (BL), Bronze (BZ), Brown (B), Evergreen (EG), and Charcoal (CH) stocked in 8’ -16’ lengths.White, Black (BL), Bronze (BZ), Brown (B), Evergreen (EG), and Charcoal (CH) stocked in 8’ -16’ lengths.ROLL TRACK SLIDING DOORSROLL TRACK SLIDING DOORSRoll Track Sliding Doors Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com112DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

235 Steel Girt (Horizontal)TSG8 # 235 - 20 Gauge Steel Girts for Sliding Doors 1.5” x 3.5” 8’TSG10 # 235 - 20 Gauge Steel Girts for Sliding Doors 1.5” x 3.5” 10’TSG12 # 235 - 20 Gauge Steel Girts for Sliding Doors 1.5” x 3.5” 12’TSG14 # 235 - 20 Gauge Steel Girts for Sliding Doors 1.5” x 3.5” 14’TSG16 # 235 - 20 Gauge Steel Girts for Sliding Doors 1.5” x 3.5” 16’TSG18 # 235 - 20 Gauge Steel Girts for Sliding Doors 1.5” x 3.5” 18’TSG20 # 235 - 20 Gauge Steel Girts for Sliding Doors 1.5” x 3.5” 20’Part# Description Size LengthProvides horizontal support on sliding door frames. Steel girts are manufactured with 20-gauge galvanized steel for long lasting, light weight, rust-free door.Big Guide RailTGRB6 Big Guide Rail with 3 Brackets for Sliding Doors 6’TGRB8 Big Guide Rail with 3 Brackets for Sliding Doors 8’TGRB10 Big Guide Rail with 3 Brackets for Sliding Doors 10’Part# Description LengthBottom Guide RailTGR5 Guide Rail System with 2 Brackets 5’TGR10 Guide Rail System with 3 Brackets 10’Part# Description SizeReduces the amount of door sway, helps prevent wind damage and provides easier door operation. Stay Guide lengths should measure 60% of the door panel width. 200B Side Rail216 Side RailTSR2008 White # 200B - Side Rail for Sliding Doors 8’TSR20010 White # 200B - Side Rail for Sliding Doors 10’TSR20012 White # 200B - Side Rail for Sliding Doors 12’TSR20014 White # 200B - Side Rail for Sliding Doors 14’TSR20016 White # 200B - Side Rail for Sliding Doors 16’TSR20018 White # 200B - Side Rail for Sliding Doors 18’TSR20020 White # 200B - Side Rail for Sliding Doors 20’TCR2168 White # 216 - Side Rail for Sliding Doors 8’TCR21610 White # 216 - Side Rail for Sliding Doors 10’TCR21612 White # 216 - Side Rail for Sliding Doors 12’TCR21614 White # 216 - Side Rail for Sliding Doors 14’TCR21616 White # 216 - Side Rail for Sliding Doors 16’TCR21618 White # 216 - Side Rail for Sliding Doors 18’TCR21620 White # 216 - Side Rail for Sliding Doors 20’Part# Description LengthPart# Description LengthROLL TRACK SLIDING DOORSROLL TRACK SLIDING DOORSRoll Track Sliding DoorsCC = Color Code * = Size113DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

ROLL TRACK SLIDING DOORSROLL TRACK SLIDING DOORSRoll Track Sliding Doors Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com114

ROLL TRACK SLIDING DOORSROLL TRACK SLIDING DOORSRoll Track Sliding DoorsCC = Color Code * = Size115

SQUARE TRACK SLIDING DOORS

Square TrackSquare Track Face MountTSQ8 Galvanized Square Track - 16 Gauge 8’TSQ10 Galvanized Square Track - 16 Gauge 10’TSQ12 Galvanized Square Track - 16 Gauge 12’TSQ14 Galvanized Square Track - 16 Gauge 14’TSQ16 Galvanized Square Track - 16 Gauge 16’TSQ20 Galvanized Square Track - 16 Gauge 20’TGC8 Galvanized Covered Square Track Face Mount - 16 Gauge 8’TGC10 Galvanized Covered Square Track Face Mount - 16 Gauge 10’TGC12 Galvanized Covered Square Track Face Mount - 16 Gauge 12’TGC14 Galvanized Covered Square Track Face Mount - 16 Gauge 14’TGC16 Galvanized Covered Square Track Face Mount - 16 Gauge 16’TGC18 Galvanized Covered Square Track Face Mount - 16 Gauge 18’TGC20 Galvanized Covered Square Track Face Mount - 16 Gauge 20’Part# Description LengthPart# Description LengthSquare Track BracketsTSSB Square Track BracketTSSSB Square Track Splice BracketPart# DescriptionSquare Track Double BracketsTDB Square Track Double BracketTDBS Square Track Double Splice BracketPart# DescriptionTSSSBTSSBTDBTDBSSquare Track Top MountTWC10 White Covered Square Track Top Mount - 16 Gauge 10’TWC12 White Covered Square Track Top Mount - 16 Gauge 12’TWC14 White Covered Square Track Top Mount - 16 Gauge 14’TWC16 White Covered Square Track Top Mount - 16 Gauge 16’TWC20 White Covered Square Track Top Mount - 16 Gauge 20’Part# Description LengthSQUARE TRACK SLIDING DOORSSQUARE TRACK SLIDING DOORSSquare Track Sliding DoorsCC = Color Code * = Size117DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

Adjustable Square Track TrolleysSquare Track Bolt TrolleysSquare Track Replacement TrolleyT32LB Side Adjustable Square Track Trolleys - Pair 35 lbs. eachT5042 5042 Side Adjustable Square Track Trolleys - Pair - Includes End CapsT5047 5047 Top Adjustable Square Track Trolleys - Pair 32 lbs. eachT38T9 Square Track Bolt Trolleys w/ Threaded Bolt - Pair 9”T5022 Square Track Bolt Trolleys w/ Delrin Bearings - Pair - Includes End Caps 9”T32REPLACE Square Track Replacement Trolleys 32 lbs. eachPart# Description Lbs. RatingPart# Description SizePart# Description Lbs. RatingT5047T5022T5042SQUARE TRACK SLIDING DOORSSQUARE TRACK SLIDING DOORSSquare Track Sliding Doors Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com118DIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLYDIRECT SHIPAVAILABLEDIRECT SHIPAVAILABLEDIRECT SHIPONLY

SQUARE TRACK SLIDING DOORSSQUARE TRACK SLIDING DOORSSquare Track Sliding DoorsCC = Color Code * = Size119

INSULATION

Part# DescriptionSq. Ft. Material Width LengthIDB16 16" Double Bubble Square Edge 167 F/F 16" 125’IDB16T 16" Double Bubble - With Staple Tabs 167 F/F 16" 125’IDB24 24" Double Bubble 250 F/F 24" 125'IDB475 48" Double Bubble 300 F/F 48" 75'IDB48 48" Double Bubble 500 F/F 48" 125'IDB48W 48" Double Bubble 500 F/W 48" 125'IDB72 72" Double Bubble 750 F/F 72" 125'IDB72W 72" Double Bubble 750 F/W 72" 125'IDBCB 48" Ultra Concrete Barrier Double Bubble 500 F/F 48' 125'IFT2 2" Metalized Reective Seam Tape F 2" 150'IFT3 3" Metalized Reective Seam Tape F 3" 150'TWT 2" White Seam Tape W 2" 150'TWT3 3" White Seam Tape W 3" 150'Double Bubble InsulationDouble Bubble Reective Insulation is a double layer of polyethylene bubbles bonded to and sandwiched between a radiant barrier metalized foil and/or white polyethylene sheet. Double Bubble is specically designed to control heat gain or loss, and prevent interior condensation, in all types of metal and metal-clad buildings. Features • Blocks up to 96% of Radiant Heat Transfer• Prevents Interior Condensation• Class 1 / Class A Fire-Rated (ASTM E84-09)• Puncture and Tear-Resistant• Unaected by Humidity• Will not Promote Mold and Mildew• Safe, Non-Toxic and Non- Carcinogenic• Easy to Handle and Install• Various Tab Options• UV-ResistantFOIL/WHITE (F/W)FOIL/FOIL (F/F)MATERIAL DETAILINSULATIONINSULATIONInsulationCC = Color Code * = Size121

Part# DescriptionSq. Ft. Material Width LengthISB48 48" Single Bubble 500 F/F 48" 125’ISB48W 48" Single Bubble 500 F/W 48" 125’ISB48WTAB 48" Single Bubble- With Staple Tabs 500 F/W 48" 125'ISB72 48" Single Bubble 750 F/F 72" 75'ISB72W 48" Single Bubble 750 F/W 72" 125'ISB72WTAB 48" Single Bubble- With Staple Tabs 750 F/W 72" 125'Single Bubble InsulationSingle Bubble Reective Insulation is a single layer of polyethylene bubbles bonded to and sandwiched between a radiant barrier metalized foil and/or white polyethylene sheet. Single Bubble is specically designed to control heat gain or loss, and prevent interior condensation, in all types of metal and metal-clad buildings. Features • Blocks up to 96% of Radiant Heat Transfer• Prevents Interior Condensation• Class 1 / Class A Fire-Rated (ASTM E84-09)• Puncture and Tear-Resistant• Unaected by Humidity• Will not Promote Mold and Mildew• Safe, Non-Toxic and Non- Carcinogenic• Easy to Handle and Install• Various Tab Options• UV-ResistantFOIL/WHITE (F/W)FOIL/FOIL (F/F)INSULATIONINSULATIONInsulation Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com122

SNOW RETENTION SYSTEMS

S-5!® ColorGard®S-5!® ColorGard® RailS-5!® VersaClip™S-5!® SnoClipS-5!® SnapClipSNGS5RAIL S-5 ColorGard Aluminum Rail - Unpunched 8’SNGS5RAIL-PUNCHED S-5 ColorGard Aluminum Rail - Punched Every 4” On Center 8’SNGS5CLIP S-5 ColorGard VersaClipSNGS5SCII S-5 ColorGard SnoClip IISNGS5SHOE S-5 ColorGard SnoClip IIISNGS5SCII-RETRO S-5 ColorGard SnapClip IISNGS5SHOE-RETRO S-5 ColorGard SnapClip IIIPart# Description LengthPart# DescriptionPart# DescriptionPart# Description• Mechanically attached with S-5!® clamps for a snow retention system that is warrantied for the life of your roof (see www.s-5.com for warranty info.)• The S-5!® clamp base can be fastened with the patented round-point setscrews for non-penetrating attachment to standing seam roofs, or can be screwed into an exposed fastener roof• Not compatible with the S-5! Mini Clamps• Easily retrotted to existing roofs or incorporated into new construction• Easy to install with common tools of the trade• Online calculator at www.S-5.com/calculator• Includes 1 splice collar• Online calculator at www.S-5.com/calculator• Online calculator at www.S-5.com/calculator• The SnoClip II can be used on panels with ribs up to 1-¾” high• The SnoClip III can be used on panels with ribs up to 3” high• Must be attached by sliding from end of rails before installation. Cannot be retrotted.• Online calculator at www.S-5.com/calculator• The SnapClip II can be used on panels with ribs up to 1-¾” high• The SnapClip III can be used on panels with ribs up to 3” high• Can be retrotted to existing ColorGard assemblies.• Online calculator at www.S-5.com/calculatorSnapClip IISnapClip IIISnoClip IISnoClip IISNOW RETENTION SYSTEMSSNOW RETENTION SYSTEMSSnow Retention Systems Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com124

2.44"(61.98 mm)(279.40 mm)2.44"(61.98 mm)(279.40 mm)2.44"(61.98 mm)(279.40 mm)S-5!® X-Gard®S-5!® X-Gard® PipeS-5!® X-Gard® BracketsS-5!® X-Gard X-ClipsSNGS5XGNEX S-5 X-Gard NeX Pipe 2” 8’SNGS5XGENDCAP S-5 X-Gard End CapsSNGS5XG1 S-5 X-Gard 1.0 Bracket for Single Pipe System 5.3” x 2.4” x 1.5”SNGS5XG2 S-5 X-Gard 2.0 Bracket for Double Pipe System 11” x 5.75” x 1.5”SNGS5XGSGII S-5 X-Gard X-Clip IISNGS5XGSGIII S-5 X-Gard X-Clip IIIPart# Description Size LengthPart# Description SizePart# Description• The strongest snow retention system on the market• A one or two pipe system that spans up to 48”• The S-5!® clamp base mechanically attaches to standing seam with patented round-point setscrews that do not void the panel nish warranty• Pin in center with runs in excess of 50ft• Not compatible with the S-5! Mini Clamps• Can be installed any time of the year• All related hardware is non-ferrous stainless steel for lasting performance• Each pipe comes with 1 splice collar• Choose the X-Gard 2.0 for a double pipe system and 1.0 for a single pipe system• Mounts to bottom pipe• Includes screwsX-Gard Pipe1.0 Bracket2.0 BracketX-Clip IIIX-Clip IISNOW RETENTION SYSTEMSSNOW RETENTION SYSTEMSSnow Retention SystemsCC = Color Code * = Size125

S-5!® DualGard™• Mechanically attached with S-5!® clamps for a snow retention system that is warrantied for the life of your roof (see www.s-5.com for warranty info.)• The S-5!® clamp base can be fastened with the patented round-point setscrews for non-penetrating attachment to standing seam roofs• Pin in center with runs in excess of 50ft• Needs thermal break every 100ft• Designed for use with the S-5! Mini Clamps• Easily retrotted to existing roofs or incorporated into new construction• Easy to install with common tools of the tradeS-5!® DualPipe S-5!® DualGard BracketS-5!® DualPipe End Cap and CollarS-5!® Dual ClipSNGS5D-PIPE S-5 DualPipe 1” 8’SNGS5D-GARD S-5 DualGardSNGS5D-CAP S-5 DualPipe End Cap and Collar - 4 packSNGS5D-CLIPII S-5 DualClip IISNGS5D-CLIPIII S-5 DualClip IIIPart# Description Size LengthPart# DescriptionPart# DescriptionPart# Description• Includes one 4” splice collarSNOW RETENTION SYSTEMSSNOW RETENTION SYSTEMSSnow Retention Systems Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com126

S-5!® SnoRail™ and SnoFence™S-5!® SnoRodS-5!® SnoRod CouplingS-5!® SnoPostS-5-ASF Clamp/S-5-AE ClampSNGS5SFR S-5 SnoFence Stainless Steel Rod 3/8” 12’SNGS5BROD S-5 SnoFence Brass Rod 3/8” 12’SNGS5COUP S-5 Aluminum Coupling for SnoRail/SnoFence 3/8” 2.8”SNGS5B-COUP S-5 Brass Coupling for SnoRail/SnoFence 3/8” 2.8”SNGS5SFP S-5 SnoFence Stainless Steel Post 2.8”SNGS5SFPE S-5 SnoFence Stainless Steel End Post 2.8”SNGS5BPOST S-5 SnoFence Brass Post 2.8”SNGS5BPOST-END S-5 SnoFence Brass End Post 2.8”SNGS5A S-5 Aluminum Clamp for SnoRail/SnoFence 1.22” x 1.22” x 1.85”SNGS5AE S-5 Aluminum End Clamp for SnoRail/SnoFence 1.22” x 1.22” x 1.85”SNGS5B-SF S-5 Brass Clamp for SnoRail/SnoFence 1.22” x 1.22” x 1.85”SNGS5B-SFE S-5 Brass End Clamp for SnoRail/SnoFence 1.22” x 1.22” x 1.85”Part# Description Size LengthPart# Description Size LengthPart# Description LengthPart# Description Size• The clean lines, cylindrical shapes and high-tech look of the SnoRail and SnoFence systems present an attractive solution to snow retention problems.• Up to six times the strength of adhesively-mounted devices• Mechanically attached with patented S-5-ASF and S-5-BSF brass or aluminum clamps• Can be installed any time of the year• All related hardware is non-ferrous stainless steel for lasting performance• Available in Brass for copper batten or standing seam roofs and in aluminum/stainless steel for other standing seam roong materials• SnoFence is compatible with S-5! SnowClipUse the stainless steel SnoRod inserted through the S-5-ASF clamps, placing it just above the panel seams for the S-5! SnoRail System. Add a second SnoRod through SnoPosts for a S-5! SnoFence system.• Used when adding a second SnoRod for an S-5! SnoFence System• End Post includes hole for setscrew to prevent the SnoRod from sliding• End Clamp includes hole for setscrew to prevent the lateral movementSNGS5SFPSNGS5BPOSTSNGS5ASNGS5B-SFSNGS5SFPESNGS5COUPSNGS5B-COUPSNGS5BRODSNGS5SFRSnoFenceSNGS5BPOST-ENDSNGS5AESNGS5B-SFESnoRailSNOW RETENTION SYSTEMSSNOW RETENTION SYSTEMSSnow Retention SystemsCC = Color Code * = Size127

Snow Defender™ 4500 Snow GuardSnow Defender™ 6500 Snow GuardSnow Defender™ 7500 DECO Snow Guard - Special OrderSnow Defender™ 85RF DECO Snow Guard - Special OrderSNGSSRcc Snow Defender 4500 - Stainless Steel with Rubber Seal 4” x 3” x 3”SNGSDcc Snow Defender 6500 - Stainless Steel with Setscrews 5.5” x 3” x 3.5”SNGSDSODECO Special Order Snow Defender 7500 DECO with Setscrews 5.5” x 3.25” x 3.5”SNG85RF Snow Defender 85RF DECO 5.625” x 3.125” x 3.25”Part# Description SizePart# Description SizePart# Description SizePart# Description Size• Designed for exposed fastener panels• Must be screwed into 2x4 purlins in the at position• Made with 16 Gauge type 304 stainless steel that will never rust• EPDM rubber sealer saves time because no caulk is needed• Powder coated for a long-lasting colored nish• Online calculator at www.snowdefendercalculator.com• Designed for standing seam panels• Fits ribs up to ⁄” wide and 1” to 1-¾” high• Made with type 304 stainless steel that will never rust• It pinches, but does not penetrate the metal panel• Powder coated for a long-lasting colored nish• Online calculator at www.snowdefendercalculator.comIntroducing the SnowDefender 7500 DECO. Based on the design of the popular SnowDefender 6500, this color matched, 304 Stainless Steel model has the more traditional, historic look of a cast snow guard. The decorative cutouts are embossed for increased strength and the proven attachment method using set screws mean the SnowDefender 7500 Deco will last the life of your roof.The 85RF is designed to combine the versatility of the S-5!™ clamp systems with the beauty and durability of the Snow Defender™ series. It adapts quickly to the S-5!™ clamps using one bolt that is easily accessed from the top and aligns squarely every time. A versatile snow guard that ts vertical folded seam proles for S-5!™, U, S, N, V, clamps (sold separately)SNOW RETENTION SYSTEMSSNOW RETENTION SYSTEMSSnow Retention Systems Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com128

Superbond High Strength Adhesive for Plastic Snow GuardsSNGGE Surebond Everseal High Strength Adhesive for Snow GuardsPart# Description• 2000 psi sheer tensile strength after 25 days of 50° F or warmer temperature cure timeSnow Defender™ Plastic Snow GuardsSNGBUSTER Snow Defender Buster - Clear Polycarbonate Snow Guard 5” x 3” x 3”SNGPC240 Snow Defender PC240 - Clear Polycarbonate Snow Guard 3” x 2.5” x 4.125”Part# Description Size• Polycarbonate Lexan 103-112 (⁄” thick)• UV stable and very strong• Mount with screws or adhesive• Attach with Surebond High Strength Adhesive• Online calculator at www.snowdefendercalculator.comSNOW RETENTION SYSTEMSSNOW RETENTION SYSTEMSSnow Retention SystemsCC = Color Code * = Size129

S-5!® CLAMPS

S-5!® GripperFix StrutSNGS5GRIP27 S-5 27” GripperFix Strut 27”SNGS5GRIP52 S-5 52” GripperFix Strut 52”SNGS5CFTAB S-5 CF TabSNGS5EFTAB S-5 EF Tab with 2 fastenersSNGS5DAMPERS-5 Damper PadSNGS5SB8X20 S-5 8MM X 20MM Stainless Flange Bolt 20 MMSNGS5SB8 S-5 8MM X 16MM Stainless Flange Bolt 16 MMSNGS5FNSS S-5 8 MM Stainless Steel Flange NutPart# Description LengthLong-term metal roofs deserve long-term, durable attachment methods. GRIPPERFIX is a perfect x for installing HVAC, satellite dishes, light xtures, conduit, service walkways, solar PV power electronics and other rooftop utilities. GRIPPERFIX oers a zero-penetration attachment solution for standing seam and other concealed-fastened roofs. GRIPPERFIX securely attaches to exposed-fastened roofs too, while still allowing free drainage beneath the system.S-5-PV Kit 2.0SNGS5PV2.0MID S-5 Solar Panel Clip Kit 2.0 PV KitSNGS5PV2.0EDGES-5 Solar Panel Clip Kit 2.0 PV Edge GrabPart# DescriptionThe PV Kit 2.0 is compatible with most common metal roong materials, including copper.The Module Placement Bevel Guide makes the module placement easier. The mounting disk is multi-directional and rails are not required. The PV grab ears, holding the solar panels in place, are broader to allow for ease of installation and precise module engagement.Accommodating module thicknesses between 30 and 46mm, the PV Kit 2.0 ts the majority of solar panels on the market. Using the S-5! mini clamps, it ts most standing seam metal roofs. When paired with other S-5! products, the PV Kit 2.0 and EdgeGrab or MidGrab will also work on most exposed fastener including corrugated metal roofs. The MidGrab is designed to t mid conditions (two adjacent panels), while the new EdgeGrab is designed specically for end conditions. SNGS5PV2.0MIDSNGS5PV2.0EDGEEF TAB CF TABSNGS5SB8* SNGS5FNSSSNGS5DAMPERGRIPPERFIX STRUTCOMPONENTS SOLD SEPARATELYS-5!® CLAMPSS-5!® CLAMPSS-5!® ClampsCC = Color Code * = Size131

CorruBracket™ 100TSNGS5CB100T Corrubracket™ 100T top mountSNGS5CB100T-MINI Corrubracket™ 100T- mini top mountPart# DescriptionThe S-5!® CorruBracket™ 100T is designed specically for corrugated roong proles that are common in North America. CorruBracket 100T mounts directly into the crest of the corrugation, straddling the valley. The slotted top hole, which accommodates standard M8 nuts and bolts, simplies alignment and maximizes exibility in attaching ancillaries. We do NOT recommend the use of CorruBracket 100T for side-bolted rail with L-Foot. Note: The Mini version of this bracket is not designed for most snow retention.®MINIMINIS-5!® ProteaBracket™S-5!® RibBracket™S-5!® RibBracket IIIS-5!® CorruBracket™SNGS5PROTEAS-5 Proteabracket - with Mounting Screws and Bolt/Washer IncludedSNGS5RB S-5 Rib Bracket (4 screws & 8mm nut included)SNGS5RB-MINI S-5 Rib Bracket Mini (2 screws and a M8 ange nut include)SNGS5RBIII S-5 Rib Bracket III (4 screws & 8mm nut included)SNGS5CB S-5 CorrubracketPart# DescriptionPart# DescriptionPart# DescriptionPart# DescriptionProteaBracket™ is the most versatile exposed-fastened metal roof attachment solution on the market, tting most trapezoidal sheet proles with and without intermediate insulation. The all-aluminum construction features an adjustable attachment base and multiple solar module attachment options to accommodate varying widths and heights. There are no messy sealants to apply and no chance for leaks; the ProteaBracket comes with factory-applied adhesive rubber sealant to ensure quick installation and a weath-er-proof t. RibBracket™ can be used to mount almost anything onto the most common ex-posed-fastened, trapezoidal roof proles marketed in North America today. RibBracket is the perfect match for our S-5-PV Kit, or any other ancillary application, and eliminates worry about cold bridging! RibBracket is extremely economical and facilitates quick and easy installation. The slotted top hole, which accommodates standard M8 nuts and bolts, simplies alignment and maximizes exibility in attaching ancillaries. RibBracket III supports trapezoid roof proles with various dimensions. The ex-to-t legs ensure the proper t on a range of proles. RibBracket III is versatile, reliable, and a smart solution for pairing our PV Kit, EdgeGrab, and third-party rails for your ex-posed-fastened trapezoidal metal roof. We do NOT recommend the use of RibBracket III for side-bolted rail with L-Foot. The S-5!® CorruBracket™ can be used to mount almost anything to corrugated metal roong. CorruBracket is compatible with 7/8” and 3/4” U.S. corrugated proles. No messy sealants to apply! No chance for leaks! The CorruBracket comes with factory-applied butyl sealant already in the base, and the S-5!-patented reservoir conceals the sealant from UV exposure, preventing UV degradation. We do NOT recommend the use of Cor-ruBracket for side-bolted rail with L-Foot. S-5!® CLAMPSS-5!® CLAMPSS-5!® Clamps Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com132

MINIMINIMINIMINIS-5-BS-5-ES-5-HS-5-H90SNGS5B S-5-B for Vertical Or Horizontal Seam Proles Max .40” ThickSNGS5B-MINI S-5-B Mini for Vertical Or Horizontal Seam Proles Max .40” ThickSNGS5E S-5-E Clamp Use For Mechanically Seamed PanelsSNGS5E-MINI S-5-E-Mini Clamp Use For Mechanically Seamed PanelsSNGS5H S-5-H ClampSNGS5H-MINI S-5-H Clamp MiniSNGS5H90 S-5-H90 Universal ClampSNGS5H90-MINI S-5-H90 Mini Universal ClampPart# DescriptionPart# DescriptionPart# DescriptionPart# DescriptionThe S-5-B clamp allows architects to maintain the beautiful appearance of their copper roong. The brass clamp ts either traditional standing or batten seams. May not t proles with seams that exceed 1-½” in height.Note: The Mini version of this clamp is not designed for most snow retention.The S-5-E is designed specically for double-folded standing seam roofs that are so popular in Europe (and in the U.S.). The S-5-E is a bit smaller and less expensive than the S-5-U, but every bit as strong. It also ts Butler’s MR-24®. Note: The Mini version of this clamp is not designed for most snow retention.The S-5-H clamp was specically developed to accommodate metal roof panels with a horizontal seam. The clamp’s unique two-piece design allows for attachment anywhere along the length of the rib, making installation fast and easy! May not t proles with horizontal legs that exceed ¾”.Note: The Mini version of this clamp is not designed for most snow retention.The S-5-H90 is a one-piece clamp that was developed to securely and cost-eectively accommodate metal roof panels with a horizontal seam greater than 0.65”. Note: The Mini version of this clamp is not designed for most snow retention.S-5!® VersaBracket-47™ and VersaBracket-67™SNGS5BRKT Versabracket-47 (To Mount ColorGard To 3' Panels Max 1-3/8" High)SNGS5BRKT67 Versabracket-67 (To Mount ColorGard To 3’ Panels Max 2-5/8” High)Part# DescriptionTo accommodate various rib heights, VersaBracket™ comes in two heights. VersaBracket can be used to mount almost anything to an exposed-fastened roof system and is com-patible with almost any trapezoidal, exposed-fastened prole. The VersaBracket comes with factory-applied butyl sealant already in the base, and the S-5!®-patented reservoir conceals the sealant from UV exposure, preventing UV degradation. We do NOT recom-mend the use of VersaBracket for side-bolted rail with L-Foot. VERSABRACKET-47 VERSABRACKET-67S-5!® CLAMPSS-5!® CLAMPSS-5!® ClampsCC = Color Code * = Size133

S-5-K GripS-5-K Grip InsertsSNGS5KGRIP S-5-K Grip (3) 8 MM bolts includedSNGS5KGRIP-MINI S-5-K Grip MiniSNGS5GX-10 GX 10 insert for K Grip clampSNGS5GXM-10 GXM-10 insert for K Grip mini ClampPart# DescriptionPart# DescriptionThe S-5-K Grip™ clamp was specically developed to t Klip-Rib® and other bulb snap-together seams. The design utilizes multiple inserts (sold separately) in order to accommodate a variety of bulb snap-together proles. The S-5-K Grip eliminates the large moment arm other attachment products use for these proles.Note: The Mini version of this component is not designed for most snow retention.Each S-5-K Grip insert has a unique shape that allows for a tight t and provides increased holding strength over other attachment options. S-5-K Grip inserts are sold separately from S-5-K Grip camps. MINIS-5-GX 10 S-5-GXM 10 MINIS-5-NSNGS5N S-5-N Clamp - Nail Strip Panel Clamp SNGS5N-MINI S-5-N Mini Utility Clamp - Nail Strip Panel ClampPart# DescriptionThe new design features an innovative insert that ensures a superior t whether placed on older proles or new and wider nail strip proles. The redesign of the clamps ts the popular 1” nail strip metal roof proles. It features angled setscrews for easier installation with no special tools required.Note: S-5! Mini clamps should not be used with S-5! SnoRail™/SnoFence™ or ColorGard® snow retention systems.MINIMINIS-5-N 1.5S-5-NH 1.5SNGS5N1.5 S-5-N 1-1/2" Clamp - For Standing SeamSNGS5N1.5-MINIS-5-N 1-1/2 Mini Clamp - For Standing SeamSNGS5NH1.5 S-5-NH 1-1/2" Clamp - For Standing SeamSNGS5NH1.5-MINI S-5-NH 1-1/2 Mini Clamp - For Standing SeamPart# DescriptionPart# DescriptionThe S-5-N 1.5 clamp was designed for application on popular 1.5” nail strip metal roof proles. An angled wall with a nose permits the S-5-N 1.5 to engage the triangle-type proles during the installation process, and a wider throat accommodates most nail strip proles. The combination of these two features allows the S-5-N 1.5 clamp to sit straighter on the seam. Note: The Mini version of this clamp is not designed for most snow retention.Designed specically for 1-½” nail strip proles with a wider horizontal dimension (> 0.475” and ≤ 0.800”), the innovative insert is a “hinge” design and features a toe to engage the female portion of the panel. It forms to the shape of the seam, preventing damage at the point of attachment, while oering you optimal holding strength. The hinge insert is also reversible to allow for proper t on both wide and medium-width proles.Note: The Mini version of this clamp is not designed for most snow retention.S-5!® CLAMPSS-5!® CLAMPSS-5!® Clamps Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com134

MINIMINIMINIS-5-SS-5-TS-5-QSNGS5S S-5-S Universal Clamp - Without Bottom LipSNGS5S-MINI S-5-S Mini Utility Clamp - Without Bottom LipSNGS5T S-5-T ClampSNGS5T-MINI S-5-T Mini Utility ClampSNGS5Q S-5-Q Clamp - 2 Piece Clamp For Standing SeamSNGS5Q-MINI S-5-Q Mini Clamp - 2 Piece Clamp For Standing SeamPart# DescriptionPart# DescriptionPart# DescriptionThe S-5-S clamp is an extraordinarily versatile clamp. It was created for popular snap-together proles — including residential proles. The S-5-S or S-5-S Mini can be used on horizontal seams under 0.54” to avoid eld crimping the seam. Note: The Mini version of this clamp is not designed for most snow retention.The S-5-T was specially developed to t certain proles having a T-shaped seam conguration. Its two-piece design allows it to be easily installed anywhere along the length of the panel seam, and also works on architectural “angle-seam” or “single-folded” paneling. Note: The Mini version of this clamp is not designed for most snow retention.The S-5-Q clamp was developed to accommodate metal roof panels having a large, round “bulb” seam conguration up to 1-⁄” or 29 mm. It will also t smaller bulb-shaped proles that were not seamed correctly, allowing the seam to be utilized without modication. Note: The Mini version of this clamp is not designed for most snow retention.MINIS-5-VSNGS5V S-5-V Vertical Clamp, With one Bottom LipSNGS5V-MINI S-5- V-Mini Vertical ClampPart# DescriptionThe S-5-V clamp is a versatile clamp that ts vertical-folded seam proles including most structural and architectural proles. Its simple design and generous dimensioning are what make the S-5-V clamp so versatile for use with the S-5!® snow retention products, such as ColorGard®, as well as with other heavy-duty applications. Note: The Mini version of this clamp is not designed for most snow retention.MINIS-5-USNGS5U S-5-U Universal ClampSNGS5U-MINI S-5-U Mini Utility ClampPart# DescriptionThe S-5-U is by far our most popular and versatile clamp. It ts about 85% of the standing seam proles manufactured in North America — including most structural and many popular architectural proles. The S-5-U can be used on vertically-oriented seams and, by rotating the clamp 90°, it can also be used on most horizontal 2” seam proles. Note: The Mini version of this clamp is not designed for most snow retention.S-5!® CLAMPSS-5!® CLAMPSS-5!® ClampsCC = Color Code * = Size135

MINIMINIS-5-ZS-5-ZH MiniS-5!® VersaGard™SNGS5Z S-5-Z Clamp - 2 Piece Clamp For Standing SeamSNGS5Z-MINI S-5-Z Clamp Mini Utility 2 Piece Clamp For Standing SeamSNGS5ZH-MINI S-5-ZH Clamp Mini Utility 2 Piece Clamp For Standing SeamSNGS5VG S-5 VersaGard BracketPart# DescriptionPart# DescriptionPart# DescriptionThe S-5-Z clamp is specially designed to t Zip-Rib®, Kalzip®, and similar proles that have a round “bulb” seam conguration. Its two-piece clamp design allows it to be easily installed anywhere along the length of the rib. Note: The Mini version of this clamp is not designed for most snow retention.The S-5-ZH Mini (“ZH” stands for Zip-Hinge) is specically designed for round “bulb” seam congurations like the BEMO, Kalzip®, Zip-Rib® and other similar proles.. The ZH Mini clamp attaches to the seam with a single setscrew.Note: The Mini version of this clamp is not designed for most snow retention.The S-5!® VersaGard™ is a strong, versatile, and aordable exposed-fastened solution for mounting snow retention and solar panels to almost any trapezoidal, exposed-fastened prole. VersaGard can be installed parallel (for snow retention or PV installations) or perpendicular to the rib (for PV installations). While the circular holes in the vertical part of the bracket support 1” pipes, the diagonal slot provides exible support for PV installations via the use of ⁄”, M8, or M10 bolts. Base accommodates roof panels with ats at least 2-¼” wide.S-5!® CLAMPSS-5!® CLAMPSS-5!® Clamps Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com136

AAg-Tuf ............................................................................ 75AJ 5100 Series White Commercial Steel Doors .................. 104AJ Ceiling Access Door ..................................................... 104AJ R51 Series White Steel Doors ....................................... 104Aluminum Soffit ............................................................. 69BBrakes ............................................................................ 24CCamo Deck Screws - National Nail .................................... 92Cannonball Fiberglass Door - #52 .................................... 103Cannonball Steel Door - #1734 ........................................ 103Caulk4350™ Metal Roof and Siding Construction Sealant .... 454500 Roof Bonding Sealant ........................................ 468150 100% Silicone High Performance Neutral Cure ... 478150 Skylight Caulk ................................................... 79ACRYL-R 5430 - Non-skinning Roof Sealant ................ 49NovaFlex ................................................................... 50RP-400® Plastic Wet-Dry Surface Roof Cement ............ 47Superbond High Strength Adhesive ............................ 129ClosuresEm-Seal Closure ......................................................... 62Foam Closure Strips ................................................... 65Coil Cradle and Dispenser ................................................ 25Coil Stock ........................................................................ 17Concrete Screw ............................................................... 88Continuous Corrugated .................................................... 13Copper Pop Rivets ........................................................... 40CrimperSingle Crimper - Malco ............................................... 20Cupolas16” Cupola ................................................................. 9424” Cupola ................................................................. 9436” Cupola ................................................................. 9448” Cupola ................................................................. 94Replacement Cupola Cap ............................................ 94DDeck FastenersCamo Deck Screws - National Nail .............................. 92Tan Deck Screws - PrimeGuard Plus ............................ 92DoorsEntry Doors ............................................................... 100Roll Track Sliding Doors .............................................. 105Square Track Sliding Doors ......................................... 116Double Bubble Insulation ................................................ 121DuPont® Roof Protector ................................................... 83EEclipse Pan Head Screw ................................................... 35Elephant Skin Synthetic Roofing Underlayment ............... 83Em-Seal Closure .............................................................. 62Entry DoorAJ 5100 Series White Commercial Steel Doors ............. 104AJ Ceiling Access Door ................................................ 104AJ R51 Series White Steel Doors ................................. 104Cannonball Fiberglass Door - #52 ............................... 103Cannonball Steel Door - #1734 ................................... 103Kodiak Doors ............................................................. 102Everdrain Skylight ........................................................... 78Extreme Angle Roof Boot ................................................ 57FFasteners#14 WoodBinder Nail-Replacement ............................ 32Camo Deck Screws - National Nail .............................. 92Concrete Screw .......................................................... 88Copper Pop Rivets ...................................................... 40Eclipse Pan Head Screw .............................................. 35GRK Structural Screws ................................................ 86Hand Pop Riveter ....................................................... 40Headlok Flathead Screws - FastenMaster .................... 88HWH SteelBinder ....................................................... 37LedgerLOK Screws - FastenMaster .............................. 87M12 Rivet Tool ........................................................... 40Nail Replacement Screw............................................. 33OSB WoodBinder ........................................................ 30Pancake Screw ........................................................... 38Polycarbonate Screws ................................................ 79Sleeve Anchor - Zinc .................................................. 91Stainless Steel Pop Rivets ........................................... 40Stainless Steel Trim Nails ............................................ 39Stainless Steel Zip Screws .......................................... 39ST Clicp Screw ............................................................ 38SteelBinder ............................................................... 36ST-XL Woodbinder ..................................................... 34Tan Deck Screws - PrimeGuard Plus ............................ 92TimberLOK Heavy-Duty Screws - FastenMaster ........... 87Titen Heavy-Duty Concrete Anchor ............................. 89Wedge Anchor - Galvanized ....................................... 89Wedge Anchor - Stainless........................................... 89Wedge Anchor - Zinc .................................................. 91WoodBinder .............................................................. 28ZXL Tapping Woodbinder ............................................ 34ZXL WoodBinder ........................................................ 29Flashing Tape .................................................................. 84Foam Closure Strips ......................................................... 65GGRK Structural Screws ..................................................... 86GutterAluminum Pop Rivets ................................................. 40HHand Pop Riveter ............................................................ 40Headlok Flathead Screws - FastenMaster ......................... 88Henry Eveguard Shingle Underlayment ............................ 83House WrapDuPont® Roof Protector ............................................. 83Rexwrap Plus House Wrap .......................................... 82Tyvek® House Wrap .................................................... 82Tyvek® StuccoWrap® .................................................. 82HWH SteelBinder ............................................................ 37IIce & Water Protector Underlayment ................................ 82InsulationDouble Bubble Insulation ........................................... 121Single Bubble Insulation ............................................ 122JJames Way Slitter ............................................................ 21James Way Valley Square ................................................. 21J-Channel Cutter - Malco ................................................. 20KKodiak Doors................................................................... 102LLedgerLOK Screws - FastenMaster .................................... 87LouversSteel Louvers ............................................................. 67MM12 Rivet Tool ................................................................ 40Metal Master Brake ......................................................... 24Metal Panels5-V Crimp .................................................................. 15Product Index9” Rib PanelPerforated .............................................................. 15Continuous Corrugated Panel ..................................... 141-1/4” Corrugated .................................................. 142-1/2” Corrugated .................................................. 14Multi-Wall ...................................................................... 80NNail Replacement Screw .................................................. 33OOSB WoodBinder ............................................................. 30PPancake Screw ................................................................ 38Peal & Seal ..................................................................... 84Perform Vent .................................................................. 64Polycarbonate Flat Sheet ................................................. 76Polycarbonate Screws ..................................................... 79Pop RivetsCopper Pop Rivets ...................................................... 40Stainless Steel Pop Rivets ........................................... 40PVC PanelsAg-Tuf ....................................................................... 75Ag-Tuf UV .................................................................. 75Python Vent .................................................................... 64RRD35 Ridge Vent ............................................................. 59Rexwrap Plus House Wrap ............................................... 82Roof BootExtreme Angle Roof Boot ........................................... 57Retrofit Round Roof Boot ........................................... 56Retrofit Square Roof Boot .......................................... 57Round Roof Boot........................................................ 54Square Roof Boot ....................................................... 55Round Keyhole Track ....................................................... 106SS-5!® ClampsCorruBracket™ 100T ................................................... 132GripperFix Strut ......................................................... 131S-5!® CorruBracket™ .................................................. 132S-5!® ProteaBracket™ ................................................. 132S-5!® RibBracket III .................................................... 132S-5!® RibBracket™ ..................................................... 132S-5!® VersaBracket-47™ and VersaBracket-67™ ........... 133S-5!® VersaGard™ ....................................................... 136S-5-B......................................................................... 133S-5-E ......................................................................... 133S-5-H ........................................................................ 133S-5-H90..................................................................... 133S-5-K Grip ................................................................. 134S-5-K Grip Inserts ...................................................... 134S-5-N ........................................................................ 134S-5-N 1.5 ................................................................... 134S-5-PV Kit 2.0 ............................................................ 131S-5-Q ........................................................................ 135S-5-S ......................................................................... 135S-5-T ......................................................................... 135S-5-U ........................................................................ 135S-5-V......................................................................... 135S-5-Z ......................................................................... 136S-5-ZH Mini ............................................................... 136S-5!® ColorGard® ............................................................. 124S-5!® DualGard™ ............................................................. 126S-5!® SnoRail™ and SnoFence™ ....................................... 127S-5!® X-Gard® ................................................................. 125Sealant2310 Tripolymer Brushable Repair Coating.................. 43 CC = Color Code * = Size137

2315LRF Leak Repair-Fibered Brushable Coating ......... 434350™ Metal Roof and Siding Construction Sealant .... 454500 Roof Bonding Sealant ........................................ 464525 Semi-Self-Leveling Sealant ................................ 468150 100% Silicone High Performance Neutral Cure ... 478150 Skylight Caulk ................................................... 79ACRYL-R 5430 - Non-skinning Roof Sealant ................ 49NovaFlex ................................................................... 50RP-400® Plastic Wet-Dry Surface Roof Cement ............ 47Sealant Tape .............................................................. 52Superbond High Strength Adhesive ............................ 129Through The Roof....................................................... 52Sealant Tape ................................................................... 52SeamersFolding Tool - Midwest ............................................... 23Hand Seamers - Malco ............................................... 23Metal Panel Hemming Tool - JS Design ....................... 23Seamer and Tongs - Malco .......................................... 23ShearsBulldog Shears - Milwaukee ....................................... 22Power Shears - Malco ................................................. 19Shears, PanelReplacement Blades .................................................. 26Single Bubble Insulation ................................................. 122Skylights & Sidelights1-1/4” Corrugated Skylight......................................... 795V Crimp Skylight ...................................................... 798150 Skylight Caulk ................................................... 79Everdrain Skylight ...................................................... 78Multi-Wall ................................................................. 80PBR Skylight .............................................................. 79Polycarbonate Screws ................................................ 79Sunsky® Skylights ...................................................... 78Sleeve Anchor - Zinc ........................................................ 91Sliding Door, Round200B Side Rail ........................................................... 113201 Bottom Rail ......................................................... 111216 Side Rail ............................................................. 113235 Steel Girt (Horizontal) ......................................... 113244 Bottom Rail ......................................................... 111391 Big Side Rail ........................................................ 112394 Big Bottom Rail ................................................... 111Adjustable Door Guide/Stop ....................................... 110Adjustable Door Stop ................................................. 108Big Guide Rail ............................................................ 113Big Side Connector Rail .............................................. 112Bottom Guide Rail ..................................................... 113Bottom Rail for Guide ................................................ 111Center Door Guide ...................................................... 110Chain Snugger ........................................................... 109Door Pull ................................................................... 109Door Seals ................................................................. 109Double Truck Trolleys.................................................. 106End Cap ..................................................................... 108Face Mount Brackets .................................................. 107Floor Mount Door Guide/Stop ..................................... 110Jamb Mount Door Stop .............................................. 108Latches ...................................................................... 109Non Adjustable Door Stop .......................................... 108Pendant Bolt Trolleys ................................................. 106Round Keyhole Track .................................................. 106Side Connector Rail .................................................... 112Side Rail .................................................................... 112Splice Collar ............................................................... 108Stay Roller ................................................................. 110Strap Trolleys ............................................................. 106Universal Bolt Bracket & Adapters .............................. 107Universal Brackets ..................................................... 107Universal Double Bracket ........................................... 107Sliding Door, SquareAdjustable Square Track Trolleys ................................. 118Square Track .............................................................. 117Square Track Bolt Trolleys ........................................... 118Square Track Brackets................................................. 117Square Track Double Brackets ..................................... 117Square Track Face Mount ............................................ 117Square Track Replacement Trolley ............................... 118Square Track Top Mount ............................................. 117Snap Lock Punch - Malco ................................................. 20Snap-Z............................................................................ 66Snips18 Gauge Cutting Snips - Milwaukee .......................... 2224 Gauge Cutting Snips - Milwaukee .......................... 22Aviation Snips - Malco ............................................... 18Aviation Snips - Milwaukee ........................................ 22Cutting Snips - Milwaukee ......................................... 22Mag Snips - Midwest ................................................. 21MAX Offset Snips - Malco ........................................... 18MAX Snips - Malco ..................................................... 18Mini Aviation Snips - Malco ........................................ 18Offset Snips - Midwest ............................................... 21Tinners - Milwaukee .................................................. 22Snow Defender™ 85RF DECO ............................................ 128Snow Defender™ 4500 Snow Guard ................................. 128Snow Defender™ 6500 Snow Guard ................................. 128Snow Defender™ 7500 DECO Snow Guard ......................... 128Snow Defender™ Plastic Snow Guards ............................. 129Snow RetentionS-5!® ColorGard®........................................................ 124S-5!® ColorGard® Rail ................................................. 124S-5!® Dual Clip ........................................................... 126S-5!® DualGard Bracket .............................................. 126S-5!® DualGard™ ........................................................ 126S-5!® DualPipe ........................................................... 126S-5!® DualPipe End Cap and Collar .............................. 126S-5!® SnapClip ........................................................... 124S-5!® SnoClip ............................................................. 124S-5!® SnoPost ............................................................ 127S-5!® SnoRail™ and SnoFence™ .................................. 127S-5!® SnoRod ............................................................. 127S-5!® SnoRod Coupling .............................................. 127S-5!® VersaClip™ ........................................................ 124S-5!® X-Gard® ............................................................ 125S-5!® X-Gard® Brackets .............................................. 125S-5!® X-Gard® Pipe..................................................... 125S-5!® X-Gard X-Clips................................................... 125S-5-ASF Clamp/S-5-AE Clamp .................................... 127Snow Defender™ 85RF DECO ...................................... 128Snow Defender™ 4500 Snow Guard ............................ 128Snow Defender™ 6500 Snow Guard ............................ 128Snow Defender™ 7500 DECO Snow Guard ................... 128Snow Defender™ Plastic Snow Guards ........................ 129Superbond High Strength Adhesive ............................ 129Soffit .............................................................................. 68Aluminum Soffit ........................................................ 69Painted Steel Soffit .................................................... 68Vinyl Soffit ................................................................ 68Specialty CoilsCamo ......................................................................... 9Textured AZ 50 Galvalume .......................................... 10Stainless Steel Pop Rivets ................................................ 40Stainless Steel Trim Nails ................................................. 39Stainless Steel Zip Screws ................................................ 39ST Clicp Screw ................................................................. 38SteelBinder ..................................................................... 36Steel Louvers .................................................................. 67Structural ScrewsExterior Structural Screw ........................................... 90GRK Structural Screws ................................................ 86Headlok Flathead Screws - FastenMaster .................... 88LedgerLOK Screws - FastenMaster .............................. 87Structural Truss Screw ................................................ 90TimberLOK Heavy-Duty Screws - FastenMaster ........... 87Sunsky® Skylights ........................................................... 78TTan Deck Screws - PrimeGuard Plus ................................. 92Through The Roof ............................................................ 52TimberLOK Heavy-Duty Screws - FastenMaster ................. 87Tinners - Milwaukee ........................................................ 22Titen Heavy-Duty Concrete Anchor .................................. 89ToolsHand Pop Riveter ....................................................... 40M12 Rivet Tool ........................................................... 40Touch Up Paint ................................................................ 17Track............................................................................... 105TrimCutter ...................................................................... 24Trim NailsStainless Steel Trim Nails ............................................ 39TrusscoreTrusscore SlatWall ...................................................... 74Trusscore Wall&CeilingBoard ...................................... 71Trusscore SlatWall ........................................................... 74TrussCore Trims ............................................................... 73Trusscore Wall&CeilingBoard ........................................... 71Tyvek® Flashing Tape ....................................................... 84Tyvek® FlexWrap Flashing Tape ........................................ 84Tyvek® House Wrap ......................................................... 82Tyvek® Protec™ 120 ......................................................... 83Tyvek® Protec™ 160 ......................................................... 83Tyvek® StuccoWrap® ....................................................... 82UUltra Vent ....................................................................... 61UnderlaymentElephant Skin Synthetic Roofing Underlayment .......... 83Henry Eveguard Shingle Underlayment ...................... 83Ice & Water Protector Underlayment........................... 82Rexwrap Plus House Wrap .......................................... 82Tyvek® House Wrap .................................................... 82Tyvek® Protec™ 120 ................................................... 83Tyvek® Protec™ 160 ................................................... 83Tyvek® StuccoWrap® .................................................. 82Warrior Felt Paper ...................................................... 82VVanmark ......................................................................... 24Angle and Trim Cutter Guide....................................... 25Coil Cradle and Dispenser ........................................... 25Industrial Metal Master Brake .................................... 24Leg Kit ....................................................................... 25Metal Master Brake .................................................... 24Trim-A-Brake II .......................................................... 24TrimCutter ................................................................. 24TrimMaster Mark II..................................................... 24UniLeg....................................................................... 25UniStand ................................................................... 25Wheel Kit .................................................................. 25VentilationPerform Vent ............................................................. 64Python Vent ............................................................... 64RD35 Ridge Vent ........................................................ 59Snap-Z ...................................................................... 66Steel Louvers ............................................................. 67Ultra Vent .................................................................. 61Vinyl Soffit ...................................................................... 68 Ephrata, PA | (833) 473-3368 | Fax: (717) 740-6644reddotproducts.com138

WWarrior Felt Paper ........................................................... 82Weathervanes46” Eagle Weathervane .............................................. 9546” Horse Weathervane .............................................. 9546” Rooster Weathervane ........................................... 9546” Yacht Weathervane .............................................. 95Clutch Base ................................................................ 99Flat Base ................................................................... 99Flat Base for Copper Weathevanes .............................. 99Replacement Directionals .......................................... 99Wedge Anchor - Galvanized ............................................. 89Wedge Anchor - Stainless ................................................ 89Wedge Anchor - Zinc ....................................................... 91Wheel Kit, Vanmark......................................................... 25Window Wrap Flashing Tape ............................................ 84WoodBinder .................................................................... 28#14 WoodBinder Nail-Replacement ............................ 32OSB WoodBinder ........................................................ 30WoodBinder .............................................................. 28ZXL WoodBinder ........................................................ 29ZZ-ClosuresSnap-Z ...................................................................... 66ZXL WoodBinder.............................................................. 29 CC = Color Code * = Size139

M-F: 7:00 am - 5:00 pm Saturdays by appointment.Closed SundaysVersion 24.01 © Red Dot Products, LLC.Most medium-sized rollformers and metal distributors are limited on space. You wish you could stock everything your customers ask for, but there’s no way. Plus, you wouldn’t get the high-volume pricing unless you bought by the truckload. So your customers are left to shop elsewhere.Not any more. Red Dot Products is like your new warehouse for building materials and metal roong accessories. We use our purchasing power to give you competitive pricing and fast shipping - from small direct-ship orders to full truckloads delivered to your shop.Now you can grow your business with a full line of color-matched metal roong accessories (caulk, fasteners, snow guards, etc...) without the storage headaches.Let us be your warehouse. Give your customers more and watch your business grow.833-473-3368RedDotProducts.com465 N Reading Rd, Ephrata, PA 17522 Fax: (717) 740-6644