RondelOPRODUCT CATALOGUE BIOPROCESSIssue 1, 2024RondelO™ is sold as a Component, not as a Final Device and not as a Replacement part, and as such does not hold a CE-mark or a FDA 510(k).TM
When accurate results countsAchieve your sampling goalsAddress: Kastellgatan 4, 254 66 Helsingborg, SwedenPhone number: +46 709 64 66 73. General inquries: info@cyto365.comComponent Catalogue Bioprocess, Issue 1, 2024. All rights reserved.Subject to technical changes without prior notice. RondelO™ is sold as a Component, not as a Final Device and not as a Replacement part, and as such does not hold a CE-mark or a FDA 510(k).Prototype Product Catalogue Bioprocess
Uniqueness of RondelO™01Accurate input and output improves results02Minimal dead space to prevent contamination 03Add your mediaAdding media to the continuous loop of substances is easy with the RondelO™ handle - simply give it a turn. Each media will be added one at a time and you have the option to include up to six ingredients.Flush your media inThere is a dedicated ”flushing position” (intermediate position) to “flush your media in” this is made possible by the continous loop. Ensure accurate feeding every time with minimum residuals from pre-vious ingredients.InputOutputHarvest your sampleHarvest your sample turning the RondelO™ handle. Only one sample can be harvested at a time for accurate sampling with minimal residuals from previous ingredients. Flush in between samplingThe dedicated ”flushing position” or ”waste position” ensure accurate sampling every time. 1. When utilizing sampling with a continous loop, the process is made easy without any unnecessary waste. Just aline the handle with a sampling port and then leave the handle in the intermediate position. 2. When utilizing sampling with a waste container/end-line, aged fluid will be wasted before collecting your fresh sample.This results in accurate sampling with minimum residuals from previous samples.
Material RondelO™ Handle: Purell Lubrication: NuSil MED-460Tubing sizeOD/ID 4.1/3.0 mm, 0.161/0.118 inch. ID 1/8" OD 1/4".PressureRondelO™ Female Luer Lock can withstand at least 2 bar water preassure. Data for RondelO™ Barbed connector is not yet released.Flow rateRondelO™ Female Luer Lock is min.150 ml/minute in a flushing position and min.165 ml/minute i a sample/feeding position with gravity. Data for RondelO™ Barbed connector is not yet released.RondelO™ benets• RondelO™ is suitable to be used due to its minimal dead space which is crucial when both adding media to the bioreactor and ensuring accurate rinsing.• When adding media to a bioreactor, the RondelO™ ensures a continuous flow, regardless of the handle position.• All in-between positions (intermediate positions) of the RondelO™ is a designated ”flushing position” to ensure no minimal dead space interfear with the results. This is both for input and output.• RondelO™ with Barbed connector is prepared for automation with mounting plate, aimed for a stepper motor.This is a concept illustration
Art no. ComponentsTubing connectorsRondelO™with NFVUVPcs / Box RondelO™ 7-way, 6 Female Luer Lock OD/ID 4.1/3.0 mm, 0.161/0.118 inch No No 1 000 RondelO™ 5-way, 4 Female Luer Lock OD/ID 4.1/3.0 mm, 0.161/0.118 inch No No 1 000 RondelO™ 3-way, 2 Female Luer Lock OD/ID 4.1/3.0 mm, 0.161/0.118 inch No No 1 000 OD/ID 4.1/3.0 mm, 0.161/0.118 inch No 500 OD/ID 4.1/3.0 mm, 0.161/0.118 inch No 500 OD/ID 4.1/3.0 mm, 0.161/0.118 inch No 500X1= Component, 8 = Assembled Single Use SetX= Number of RondelO™ in the Single Use SetArt no. ComponentsTubing connectorsRondelO™with NFVUVPcs / BoxA1001-U1 RondelO™ 7-way, 6 Female Luer Lock OD/ID 4.1/3.0 mm, 0.161/0.118 inch No 1 000A1002-U1 RondelO™ 5-way, 4 Female Luer Lock OD/ID 4.1/3.0 mm, 0.161/0.118 inch No 1 000A1004-U1 RondelO™ 3-way, 2 Female Luer Lock OD/ID 4.1/3.0 mm, 0.161/0.118 inch No 1 000A1011-U1 OD/ID 4.1/3.0 mm, 0.161/0.118 inch 500A1012-U1 OD/ID 4.1/3.0 mm, 0.161/0.118 inch 500A1014-U1 OD/ID 4.1/3.0 mm, 0.161/0.118 inch 500Product index ComponentsArt no. ComponentTubing connectorsRondelO™with NFVUVPcs / Box RondelO™, 7-way, 6 Barbed Connector ID 1/8" OD 1/4" No No 1000
is easy integrated into any application using the tubing automation with mounting plateRondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPERondelO™, Barbed connectorBox size: 386x284x183 mmPcs/Box: 1000Drawings not to scaleArt no. TitleTubing connectorsRondelO™with NFVUVPcs / Box RondelO™ 7-way, 6 Barbed connector ID 1/8" OD 1/4" No No 1000
is easy integrated into any application using the tubing RondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPERondelO™, Female Luer LockBox size: 386x284x183 mmPcs/Box: 1 000Drawings not to scaleArt no. TitleTubing connectorsRondelO™with NFVUVPcs / Box RondelO™ 7-way, 6 Female Luer Lock OD/ID 4.1/3.0 mm, 0.161/0.118 inch No No 1 000 RondelO™ 5-way, 4 Female Luer Lock OD/ID 4.1/3.0 mm, 0.161/0.118 inch No No 1 000 RondelO™ 3-way, 2 Female Luer Lock OD/ID 4.1/3.0 mm, 0.161/0.118 inch No No 1 000
is easy integrated into any application using the tubing RondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPENeedle Free Valve: Tritan™ COPE Box size: 386x284x183 mmPcs/Box: 1 000Drawings not to scaleArt no. TitleTubing connectorsRondelO™with NFVUVPcs / Box OD/ID 4.1/3.0 mm, 0.161/0.118 inch No 500 OD/ID 4.1/3.0 mm, 0.161/0.118 inch No 500 OD/ID 4.1/3.0 mm, 0.161/0.118 inch No 500
is easy integrated into any application using the tubing UV master batch: Mevopur-YellowRondelO™ Handle: Purell™ HDPERondelO™, Female Luer LockBox size: 386x284x183 mmPcs/Box: 1 000 Drawings not to scaleArt no. TitleTubing connectorsRondelO™with NFVUVPcs / BoxA1001-U1 RondelO™ 7-way, 6 Female Luer Lock OD/ID 4.1/3.0 mm, 0.161/0.118 inch No 1 000A1002-U1 RondelO™ 5-way, 4 Female Luer Lock OD/ID 4.1/3.0 mm, 0.161/0.118 inch No 1 000A1004-U1 RondelO™ 3-way, 2 Female Luer Lock OD/ID 4.1/3.0 mm, 0.161/0.118 inch No 1 000A1001-U1 A1002-U1 A1004-U1
is easy integrated into any application using the tubing UV master batch: Mevopur-YellowRondelO™ Handle: Purell™ HDPENeedle Free Valve: Tritan™ COPE Box size: 386x284x183 mmPcs/Box: 1 000Drawings not to scaleArt no. TitleTubing connectorsRondelO™with NFVUVPcs / BoxA1011-U1 OD/ID 4.1/3.0 mm, 0.161/0.118 inch 500A1012-U1 OD/ID 4.1/3.0 mm, 0.161/0.118 inch 500A1014-U1 OD/ID 4.1/3.0 mm, 0.161/0.118 inch 500A1011-U1 A1012-U1 A1014-U1Drawings not to scaleA1011-U1 A1012-U1 A1014-U1
STANDARD OR CUSTOMIZED SOLUTIONSThis is a concept illustrationChoose a Primary SUS for a bioreactor with a continous loop or for a bioreactor with an end-line.Add a Secondary SUS with containers. 123Or customize your solution withtubes, connectors, clamps, plugs, bags etc.
STANDARD OR CUSTOMIZED SOLUTIONS
This is a concept illustration
Art no. Continous loopNo. of sampling portsNo. of RondelO™No. of clamps RondelO™ 7-way, 6 Female Luer Lock SUS 6 1 2 RondelO™ 5-way, 4 Female Luer Lock SUS 4 1 2 RondelO™ 3-way, 2 Female Luer Lock SUS 2 1 2 RondelO™ 7-way, 6 Female Luer Lock SUS Extended 6 RondelO™ 5-way, 4 Female Luer Lock SUS Extended 4 RondelO™ 3-way, 2 Female Luer Lock SUS Extended 2 X1= Component, 8 = Assembled Single Use Set X= Number of RondelO™ in the Single Use SetArt no. Continous loopNo. of sampling portsNo. of RondelO™No. of clamps 6 1 2 4 1 2 2 1 2 6 4 2 Product indexArt no. Continous loopNo. of sampling portsNo. of RondelO™No. of clamps RondelO™, 7-way, 6 Barbed Connector SUS 6 1 2 RondelO™, 7-way, 6 Barbed Connector SUS Extended6
accurate extract up to six samples when utilizing sampling with a RondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPEDrawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps RondelO™, 7-way, 6 Barbed Connector SUS 6 1 2Primary SUSRondelO™ Barbed ConnectorDrawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps RondelO™, 7-way, 6 Barbed Connector SUS 6 1 2Continous loop
to extend your sampling solution when utilizing sampling Customize the Single-Use Set Extended with the number RondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPEDrawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps RondelO™, 7-way, 6 Barbed Connector SUS Extended 6 Drawings not to scalePrimary SUS ExtendedRondelO™ Barbed Connector Customize the Customize the
accurate extract up to six samples when utilizing sampling with a Primary SUSRondelO™ Female Luer LockRondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPEDrawings not to scaleDrawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps RondelO™ 7-way, 6 Female Luer Lock SUS 6 1 2 RondelO™ 5-way, 4 Female Luer Lock SUS 4 1 2 RondelO™ 3-way, 2 Female Luer Lock SUS 2 1 2Continous loop
to extend your sampling solution when utilizing sampling Customize the Single-Use Set Extended with the number Primary SUS ExtendedRondelO™ Female Luer LockRondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPEDrawings not to scaleDrawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps RondelO™ 7-way, 6 Female Luer Lock SUS Extended 6 RondelO™ 5-way, 4 Female Luer Lock SUS Extended 4 RondelO™ 3-way, 2 Female Luer Lock SUS Extended 2 Continous loopCustomize the Customize the
accurate extract up to six samples when utilizing sampling with a Primary SUSRondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPENeedle Free Valve: Tritan™ COPEDrawings not to scaleDrawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps 6 1 2 4 1 2 2 1 2Continous loop
to extend your sampling solution when utilizing sampling Customize the Single-Use Set Extended with the number Primary SUS ExtendedRondelO™ RondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPENeedle Free Valve: Tritan™ COPEDrawings not to scaleDrawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps 6 4 2 Customize the
This is a concept illustration
Art no. End-lineNo. of sampling portsNo. of RondelO™No. of clamps RondelO™ 7-way, 6 Female Luer Lock SUS 6 1 2 RondelO™ 5-way, 4 Female Luer Lock SUS 4 1 2 RondelO™ 3-way, 2 Female Luer Lock SUS 2 1 2 RondelO™ 7-way, 6 Female Luer Lock SUS Extended 6 RondelO™ 5-way, 4 Female Luer Lock SUS Extended 4 RondelO™ 3-way, 2 Female Luer Lock SUS Extended 2 X1= Component, 8 = Assembled Single Use Set X= Number of RondelO™ in the Single Use SetArt no. End-lineNo. of sampling portsNo. of RondelO™No. of clamps 6 1 2 4 1 2 2 1 2 6 4 2 Art no. End-lineNo. of sampling portsNo. of RondelO™No. of clamps RondelO™, 7-way, 6 Barbed Connector SUS 6 1 2 RondelO™, 7-way, 6 Barbed Connector SUS Extended6 Product index
accurate extract up to six samples when utilizing sampling with an RondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPEDrawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps RondelO™, 7-way, 6 Barbed Connector SUS 6 1 2Primary SUSRondelO™ Barbed ConnectorDrawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps RondelO™, 7-way, 6 Barbed Connector SUS 6 1 2End-lineEnd-lineBarbed
to extend your sampling solution when utilizing sampling Customize the Single-Use Set Extended with the number RondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPEDrawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps RondelO™, 7-way, 6 Barbed Connector SUS Extended 6 Drawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps RondelO™, 7-way, 6 Barbed Connector SUS Extended 6 Primary SUS ExtendedRondelO™ Barbed Connector Customize the Barbed
accurate extract up to six samples when utilizing sampling with an Primary SUSRondelO™ Female Luer LocksRondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPEDrawings not to scaleDrawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps RondelO™ 7-way, 6 Female Luer Lock SUS 6 1 2 RondelO™ 5-way, 4 Female Luer Lock SUS 4 1 2 RondelO™ 3-way, 2 Female Luer Lock SUS 2 1 2End-line
to extend your sampling solution when utilizing sampling Customize the Single-Use Set Extended with the number Primary SUS ExtendedRondelO™ Female Luer LocksRondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPEDrawings not to scaleDrawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps RondelO™ 7-way, 6 Female Luer Lock SUS Extended 6 RondelO™ 5-way, 4 Female Luer Lock SUS Extended 4 RondelO™ 3-way, 2 Female Luer Lock SUS Extended 2 Customize the
accurate extract up to six samples when utilizing sampling with an Primary SUSRondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPENeedle Free Valve: Tritan™ COPEDrawings not to scaleDrawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps 6 1 2 4 1 2 2 1 2End-line
to extend your sampling solution when utilizing sampling with a n end-lineCustomize the Single-Use Set Extended with the number Primary SUSRondelO™ RondelO™ House: Tritan™ COPERondelO™ Handle: Purell™ HDPENeedle Free Valve: Tritan™ COPEDrawings not to scaleDrawings not to scaleArt no. TitleNo. of sampling portsNo. of RondelO™No. of clamps 6 4 2 Customize the
Secondary SUS Feeding to the Secondary SUS FeedingFeeding Line 100 mm to LuerFeeding Connection to Luer Barbed Connector
Secondary SUS SamplingSecondary SUS Sampling to the Sampling Tube Sampling Bag
Product design (R&D) Customized solutions1We will start with a product design drawing and technical feasibility2Optional: We will do a prototype and prototype testing34Production and assembly of your Single-Use System5Optional: Sterilisation of the Single-Use System6Packaging and labeling7Delivery8
Components for a customized solutionCheck ValvesClampsSpikesCapsSyringes
Let’s collaborateWebpagewww.rondelo.ioGeneral inquries info@cyto365.comPhone number+46 709 64 66 73