MP 275 - Tamlex Catalogue V2.2 - Web : simplebooklet.com

STEEL CABLE MANAGEMENTSection ContentAs a British manufacturer of cable management products, Tamlex is uniquely placed. With over 50 years experience and expertise, its proven capability to supply from floor service boxes to power and lighting trunking systems.As a design orientated manufacturer, Tamlex has established many standard product ranges as well as special products to suit individual installation circumstances that incorporate features and benefits for the installer.At Tamlex we strive for excellence in providing cable management products to our expanding customer base. We place a high value on minimising the impact to the environment and are committed to the maintenance and improvement of environmental practice in our day to day operations as a manufacturer and distributor.Trunking 4 IP4X Trunking 8Lighting Trunking 10Cable Tray 12FastConnect Basket Tray 16Service Boxes & Plates 22Steel Conduit 28Modular Flush Screed Trunking 30Flush Screed Trunking 33Switch, Socket & Adaptable Boxes 34Strut Framework & Accessories 36General Fixings 41Technical Information 423

Page 4

4TAMLEX |DISTRIBUTION TRUNKING• Manufactured from continuously hot dipped zinc coated low carbon steel strip to BS EN 10346: 2015.• Tamlex trunking can be powder coated to any RAL colour.• All lid fixings and couplers are included.• Standard trunking is available with a selection of lid fixings.• Special sizes are available.MULTI-COMPARTMENT TRUNKINGSTANDARD LENGTHS COMPARTMENT OPTIONSFor 1 compartment trunking there is no need to change the catalogue number. Example TRE33For 2 compartment trunking add ‘/2’ to the end of the catalogue number. Example TRE33/2For 3 compartment trunking add ‘/3’ to the end of the catalogue number. Example TRE33/3TRE62/3TrunkingMeasurements:Millimetres (mm) unless stated otherwiseAll Trunking accessories compatible with TRE and MRE systemsTrunking and accessories available up to 300 mm x 300 mm x 3 m upon request. SPECIAL SIZES2 COMPARTMENTCAT. NO.3 COMPARTMENTCAT. NO.W H L mTRE22/2 N/A 50 50 3TRE32/2 TRE32/3 75 50 3TRE33/2 TRE33/3 75 75 3TRE42/2 TRE42/3 100 50 3TRE43/2 TRE43/3 100 75 3TRE44/2 TRE44/3 100 100 3TRE62/2 TRE62/3 150 50 3TRE63/2 TRE63/3 150 75 3TRE64/2 TRE64/3 150 100 3TRE66/2 TRE66/3 150 150 3COMPARTMENT OPTIONSStandard trunking is available in multi-compartment options. Trunking and accessories are supplied with equal compartments as standard. For unequal compartments, details must be supplied at the time of order.STANDARD ACCESSORIES COMPARTMENT OPTIONSFor 1 compartment accessories there is no need to change the catalogue number. Example TGBT33For 2 compartment accessories add ‘/2’ to the end of the catalogue number. Example TGBT33/2For 3 compartment accessories add ‘/3’ to the end of the catalogue number. Example TGBT33/3PRODUCT CODE GUIDEFor example to order TRE42 with two compartments follow this exampleTrunking Cat. No.Width (Inches)CompartmentsTRE 4 2Height (Inches)2 /SINGLE COMPARTMENT TURNBUCKLETRE33CAT. NO. W H L mTRE22 50 50 3TRE32 75 50 3TRE33 75 75 3TRE42 100 50 3TRE43 100 75 3CAT. NO. W H L mTRE44 100 100 3TRE62 150 50 3TRE63 150 75 3TRE64 150 100 3TRE66 150 150 3• Supplied complete with turnbuckle lid.CAT. NO. W H L mMRE44 100 100 3MRE62 150 50 3MRE63 150 75 3MRE64 150 100 3MRE66 150 150 3SINGLE COMPARTMENTSCREW FIXED LIDMRE33CAT. NO. W H L mMRE22 50 50 3MRE32 75 50 3MRE33 75 75 3MRE42 100 50 3MRE43 100 75 3• 4 lid fixing positions per 3 metre length.TRUNKING

Page 5

5| TAMLEXTAMLEXGUSSET BEND TOP LID GUSSET BEND INSIDE LIDTRUNKING ACCESSORIES• For 2 compartment fittings add suffix ‘/2’ e.g. TGBT33/2.• For 3 compartment fittings add suffix ‘/3’ e.g. TGBT33/3.TGHT33 TGHN33TrunkingMeasurements:Millimetres (mm) unless stated otherwiseAll Trunking accessories compatible with TRE and MRE systems90° CAT. NO. 45° CAT. NO. W HTGBT22 TGHT22 50 50TGBT32 TGHT32 75 50TGBT33 TGHT33 75 75TGBT42 TGHT42 100 50TGBT43 TGHT43 100 75TGBT44 TGHT44 100 100TGBT62 TGHT62 150 50TGBT63 TGHT63 150 75TGBT64 TGHT64 150 100TGBT66 TGHT66 150 15090° CAT. NO. 45° CAT. NO. W HTGBN22 TGHN22 50 50TGBN32 TGHN32 75 50TGBN33 TGHN33 75 75TGBN42 TGHN42 100 50TGBN43 TGHN43 100 75TGBN44 TGHN44 100 100TGBN62 TGHN62 150 50TGBN63 TGHN63 150 75TGBN64 TGHN64 150 100TGBN66 TGHN66 150 150GUSSET BEND OUTSIDE LID GUSSET TEE TOP LIDTGTT33TGBO3390° CAT. NO. 45° CAT. NO. W HTGBO22 TGHO22 50 50TGBO32 TGHO32 75 50TGBO33 TGHO33 75 75TGBO42 TGHO42 100 50TGBO43 TGHO43 100 75TGBO44 TGHO44 100 100TGBO62 TGHO62 150 50TGBO63 TGHO63 150 75TGBO64 TGHO64 150 100TGBO66 TGHO66 150 150CAT. NO. W HTGTT22 50 50TGTT32 75 50TGTT33 75 75TGTT42 100 50TGTT43 100 75TGTT44 100 100TGTT62 150 50TGTT63 150 75TGTT64 150 100TGTT66 150 150

Page 6

6TAMLEX |TRC33-22TGFT33TGTO33TGTN33TRUNKING ACCESSORIESREDUCERAdditional sizes available upon request.GUSSET FOURWAYGUSSET TEE INSIDE LIDGUSSET TEE OUTSIDE LIDEARTH BONDING LINKPack quantity: 50 per pack.TrunkingMeasurements:Millimetres (mm) unless stated otherwiseAll Trunking accessories compatible with TRE and MRE systems• For 2 compartment fittings add suffix ‘/2’ e.g. TGTN33/2.• For 3 compartment fittings add suffix ‘/3’ e.g. TGTN33/3.DESCRIPTION CAT. NO. Earth bonding link for trunking EBLCAT. NO. W1 H1 W2 H2TRC33-22 75 75 50 50TRC42-22 100 50 50 50TRC44-22 100 100 50 50TRC44-33 100 100 75 75TRC64-44 150 100 100 100TRC66-33 150 150 75 75TRC66-44 150 150 100 100H1H2W2W1W1W2H1H2W2W1H1H1H2W2W1H2H1CAT. NO. W HTGFT22 50 50TGFT32 75 50TGFT33 75 75TGFT42 100 50TGFT43 100 75CAT. NO. W HTGTN22 50 50TGTN32 75 50TGTN33 75 75TGTN42 100 50TGTN43 100 75CAT. NO. W HTGTO22 50 50TGTO32 75 50TGTO33 75 75TGTO42 100 50TGTO43 100 75CAT. NO. W HTGTO44 100 100TGTO62 150 50TGTO63 150 75TGTO64 150 100TGTO66 150 150CAT. NO. W HTGTN44 100 100TGTN62 150 50TGTN63 150 75TGTN64 150 100TGTN66 150 150CAT. NO. W HTGFT44 100 100TGFT62 150 50TGFT63 150 75TGFT64 150 100TGFT66 150 150TURNBUCKLEPack quantity: 25 per pack.DESCRIPTION CAT. NO. Tamlex turnbuckle TTBØ12 mmFixing Hole

Page 7

7| TAMLEXTAMLEXSUSPENSIONGHA33SHARP BENDTNEO33TRUNKING ACCESSORIESTNTT33CABLE RETAINER SLEEVE COUPLER FLANGE COUPLERCR3 GSC33 GCA33Supplied in 1’s. Supplied in pairs. Supplied in pairs.HDD2HD11• For 2 compartment fittings add suffix ‘/2’ e.g. TNET33/2.• For 3 compartment fittings add suffix ‘/3’ e.g. TNET33/3.TrunkingMeasurements:Millimetres (mm) unless stated otherwiseAll Trunking accessories compatible with TRE and MRE systemsTRUNKING SIZE SUSPENSION SIZECAT. NO. W H H DGHA22 50 50 122 45GHA33 75 75 147 45GHA44 100 100 172 45GHA66 150 150 222 45GSE33STOP ENDCAT. NO. W HGSE22 50 50GSE32 75 50GSE33 75 75GSE42 100 50GSE43 100 75GSE44 100 100GSE62 150 50GSE63 150 75GSE64 150 100GSE66 150 150TOP LIDCAT. NO.INSIDE LIDCAT. NO.OUTSIDE LIDCAT. NO.TNET22 TNEN22 TNEO22TNET32 TNEN32 TNEO32TNET33 TNEN33 TNEO33TNET42 TNEN42 TNEO42TNET43 TNEN43 TNEO43TNET44 TNEN44 TNEO44TNET62 TNEN62 TNEO62TNET63 TNEN63 TNEO63TNET64 TNEN64 TNEO64TNET66 TNEN66 TNEO66CAT. NO. TRUNKING WIDTHCR2 50CR3 75CR4 100CR6 150CAT. NO. TRUNKING WIDTHGSC22 50GSC33 75GSC44 100GSC66 150CAT. NO. TRUNKING HEIGHTGCA22 50GCA33 75GCA44 100GCA66 150SOCKET ADAPTOR PLATESDESCRIPTION CAT. NO. W H D100 mm Single socket plate SSP4 230 104 12150 mm Single socket plate SSP6 230 155 12100 mm Double socket plate DSP4 230 104 12150 mm Double socket plate DSP6 230 155 12SSP4U SLEEVE COUPLERGSCU33Supplied in 1’s.CAT. NO. TRUNKING WIDTHGSCU22 50GSCU33 75GSCU44 100GSCU66 150SHARP TEETOP LID TEECAT. NO.W HTNTT22 50 50TNTT32 75 50TNTT33 75 75TNTT42 100 50TNTT43 100 75TNTT44 100 100TNTT62 150 50TNTT63 150 75TNTT64 150 100TNTT66 150 150For multi-compartment trunking

Page 8

8TAMLEX |IP4X TRUNKING FEATURESIP4X TrunkingBS 7671:2008 – Amendment No.1:2011 Section 521.10.1 stipulates the need for trunking to deliver IPXXD or IP4X protection when used with single insulated (non-sheathed) cables.Tamlex IP4X trunking is an independently test certified system to allow both new and existing trunking systems achieve this level of protection with the introduction of a unique coupler system which fits over all joints between lengths and standard accessories to deliver a fully compliant solution without the need to buy alternative accessories or fittings.IP4X TRUNKING SYSTEMFEATURES:IP4X PRODUCT CODE GUIDEStandard trunking and accessories are available to ingress protection rating IP4X. As standard trunking and accessories are supplied to IP2X. For IP4X trunking systems, details must be supplied at the time of order.CSA Group Testing UK Ltd, Unit 6, Hawarden Industri al Park, Hawarden, Deeside, CH5 3USTel.: +44 (0) 1244 670 900 / Fax: +44 (0) 1244 539 301 / E-Mail:ukinfo@csagroup.org / Web:www.csagroupuk.orgAccredited certification and EU Notified Body activities are undertaken by Sira Certification ServiceRegistered in England: No 2888007, Registered Office: AstonW ay, Leyland, Preston PR26 7TZ, United KingdomCSA Group Testing UK Ltd,Unit 6, Hawarden Industrial Park,Hawarden, Deeside,CH5 3USPage 1 of 5Form 6154, Issue 15 CSA Group Testing UK Ltd, a CSA Group company, provides the following services: • SAFETY TESTING • HAZARDOUS AREA CLASSIFICATION• ENVIRONMENTAL TESTING • PRODUCT CERTIFICATION SERVICES• TRAINING • FUNCTIONAL SAFETYThe company has UKAS (United Kingdom Accreditation Service) accredited facilities for testing. Certification and EU Notified Body activities are undertaken by Sira Certification Service. TESTS UNDERTAKEN AND REPORT PREPARED BY CSA GROUP TESTING UK LIMITED Opinions and interpretations expressed herein are outside the scope of UKAS AccreditationAuthor: L Jones Laboratory Technician Technical Approval: S Cork Laboratory Manager Date: 21st October 2015Ingress Protection test on a length of fabricated trunking on behalf of Tamlex Report No: N70048829 Commercially in Confidence Copyright  CSA Group Testing UK Ltd The contents of this document are subject to the terms and conditions of CSA Group Testing UK Ltd available free on request.

Page 9

9| TAMLEXTAMLEXIP4X TRUNKING FEATURES IP4X TrunkingIP4X trunking is an independently test certified system to allow new & existing trunking system installations IP4X protection1.CertifiedUnique coupler system which fits externally over all joints between lengths and standard accessories. No need to order different accessories to suite2.IP4X Ingress ProtectionProtection against 1.00 mm probes or greater in accordance to the latest wiring regulations3.IP4X CouplerSTEP 1INSTALLATION GUIDESTEP 2STEP 3STEP 4STEP 51.Certified2.IP4X Ingress Protection3.IP4X Coupler

Page 10

10TAMLEX |• 3 m & 4.5 m lengths as standard.• Snap-on lid fits both sizes.• Couplers simply slide into position.• Standard 2” trunking accessories can also be used.• Manufactured from continuously hot dipped zinc coated low carbon steel strip to BS EN 10346: 2015.• Tamlex trunking can be powder coated to any colour.LIGHTING TRUNKINGTRUNKING BODYCOUPLERSLLC3TRUNKING LIDSLPLLong couplers should be used when the trunking is suspended. Couplers are designed to bite fit against the return flange on the trunking body.Couplers & lid must be ordered separately.LTS 3-11TRUNKING SUSPENSION3760HWLWHL60 37Lighting TrunkingMeasurements:Millimetres (mm) unless stated otherwiseCAT. NO. W H L mLLC 3 50 50 240LSC 3 50 50 150CAT. NO. W H L mLPL white (plastic) 50 50 2LGLM metal (galv) 50 50 2CAT. NO. W H L mLTB 3 50 50 3LTB45 50 50 4.5LTB 350 mm x 50 mm Galvanised Lighting Trunking BodyCAT. NO. HOLE DIA. TO ACCEPTLTS 3-11 11 M10 RodLTS 3-20 20 20 mm ConduitA ‘Snap-on’ lid trunking system for fast, tool free installationsLWH

Page 11

11| TAMLEXTAMLEXTOP LID BENDS OUTSIDE LID BENDSLIGHTING TRUNKINGTOP LID FOURWAYINSIDE LID BENDSTOP LID TEEHWHWWHWHWHWHWHWHWHWHLighting TrunkingMeasurements:Millimetres (mm) unless stated otherwiseCouplers are designed to bite fit against the return flange on the trunking body.CAT. NO. W H AL2TC 3 50 50 90°L2TC 3 45 50 50 45°CAT. NO. W H AL2OC 3 50 50 90°L2OC 3 45 50 50 45°CAT. NO. W H AL2IC 3 50 50 90°L2IC 3 45 50 50 45°CAT. NO. W HL3TC 3 50 50CAT. NO. W HL4TC 3 50 50GIRDER CLAMPFLANGE ENDSupplied in pairs.CABLE RETAINERLIGHT FITTING SUSPENSIONSupplied with long brass bush and lock ring.166250535670623716705653Trunking supplied separately.CAT. NO.LFSSTOP ENDCAT. NO. W HLBE 3 50 50CAT. NO.LGC 3CAT. NO.LCRCAT. NO.LFE 3Supplied separately.ØAØAØA

Page 12

12TAMLEX |CABLE TRAYMMF225MCT2MHF225No fixing couplers required on MCT tray.LIGHT DUTY TRAY 10 mm STRAIGHT EDGEMEDIUM DUTY TRAY25 mm DEEP RETURNED FLANGEHEAVY DUTY TRAY50 mm DEEP RETURNED FLANGEBends, tees and fourways can be site fabricated or purchased.Sizes above 600 mm available upon request.Cable TrayMeasurements:Millimetres (mm) unless stated otherwiseCAT. NO. W D L mMCT2 50 10 3MCT3 75 10 3MCT4 100 10 3MCT6 150 10 3MCT9 225 10 3MCT12 300 10 3MCT18 450 10 3FEATURES:• Standard tray supplied in 3 m lengths• 3 Standard designs of tray to suit individual applications.• Hole pattern designed to provide maximum flexibility for positioning cable ties without compromising strength.• Manufactured from continuously hot dipped zinc coated low carbon steel strip to BSEN 10346: 2009.• Light duty tray has a notched end eliminating the need for separate couplers.• Return flange tray couplers do not require the tray to be drilled even when it has been cut.• Special sizes and designs are available upon request.• Lid for tray can be made to order.• Solid tray available upon request.• Cable tray can be powder coated to any RAL colour.CAT. NO. W D L mMMF/50 50 25 3MMF/75 75 25 3MMF/100 100 25 3MMF/150 150 25 3MMF/225 225 25 3MMF/300 300 25 3MMF/450 450 25 3MMF/600 600 25 3CAT. NO. W D L mMHF/75 75 50 3MHF/100 100 50 3MHF/150 150 50 3MHF/225 225 50 3MHF/300 300 50 3MHF/450 450 50 3MHF/600 600 50 3Special sizes and designs are available upon request.SPECIAL SIZESSpecial sizes and designs are available upon request.SPECIAL SIZESSpecial sizes and designs are available upon request.SPECIAL SIZES

Page 13

13| TAMLEXTAMLEXACCESSORIESPMF225-FTCPMF225-FEC90° FLAT BENDSFLAT TEESPMF225-FEC4545° FLAT BENDSCable TrayMeasurements:Millimetres (mm) unless stated otherwisePMF225-FWCFOURWAYSLIGHT DUTYCAT. NO.MEDIUM DUTYCAT. NO.HEAVY DUTYCAT. NO.WPCT50-FE PMF50-FEC - 50PCT75-FE PMF75-FEC PHF75-FEC 75PCT100-FE PMF100-FEC PHF100-FEC 100PCT150-FE PMF150-FEC PHF150-FEC 150PCT225-FE PMF225-FEC PHF225-FEC 225PCT300-FE PMF300-FEC PHF300-FEC 300PCT450-FE PMF450-FEC PHF450-FEC 450- PMF600-FEC PHF600-FEC 600LIGHT DUTYCAT. NO.MEDIUM DUTYCAT. NO.HEAVY DUTYCAT. NO.WPCT50-FE45 PMF50-FEC45 - 50PCT75-FE45 PMF75-FEC45 PHF75-FEC45 75PCT100-FE45 PMF100-FEC45 PHF100-FEC45 100PCT150-FE45 PMF150-FEC45 PHF150-FEC45 150PCT225-FE45 PMF225-FEC45 PHF225-FEC45 225PCT300-FE45 PMF300-FEC45 PHF300-FEC45 300PCT450-FE45 PMF450-FEC45 PHF450-FEC45 450- PMF600-FEC45 PHF600-FEC45 600LIGHT DUTYCAT. NO.MEDIUM DUTYCAT. NO.HEAVY DUTYCAT. NO.WPCT50-FT PMF50-FTC - 50PCT75-FT PMF75-FTC PHF75-FTC 75PCT100-FT PMF100-FTC PHF100-FTC 100PCT150-FT PMF150-FTC PHF150-FTC 150PCT225-FT PMF225-FTC PHF225-FTC 225PCT300-FT PMF300-FTC PHF300-FTC 300PCT450-FT PMF450-FTC PHF450-FTC 450- PMF600-FTC PHF600-FTC 600LIGHT DUTYCAT. NO.MEDIUM DUTYCAT. NO.HEAVY DUTYCAT. NO.WPCT50-FW PMF50-FWC - 50PCT75-FW PMF75-FWC PHF75-FWC 75PCT100-FW PMF100-FWC PHF100-FWC 100PCT150-FW PMF150-FWC PHF150-FWC 150PCT225-FW PMF225-FWC PHF225-FWC 225PCT300-FW PMF300-FWC PHF300-FWC 300PCT450-FW PMF450-FWC PHF450-FWC 450- PMF600-FWC PHF600-FWC 600

Page 14

14TAMLEX |ACCESSORIESREDUCERSWhen ordering tray reducers, order the larger size using the Cat. No. * - The smaller size (W2) must be specified from 75 mm to 450 mm (e.g. PMF300-RC225).PMF225-RC*SIZE (mm)W2ADJUSTABLE BENDSPMF225-ADJUNIVERSAL RISERSPMF225-URSizes above 600 mm available upon request. Bend adjusts from 5° to 95°.Cable TrayMeasurements:Millimetres (mm) unless stated otherwiseLIGHT DUTYCAT. NO.MEDIUM DUTYCAT. NO.HEAVY DUTYCAT. NO.WPCT50-UR PMF50-UR - 50PCT75-UR PMF75-UR PHF75-UR 75PCT100-UR PMF100-UR PHF100-UR 100PCT150-UR PMF150-UR PHF150-UR 150PCT225-UR PMF225-UR PHF225-UR 225PCT300-UR PMF300-UR PHF300-UR 300PCT450-UR PMF450-UR PHF450-UR 450- PMF600-UR PHF600-UR 600MEDIUM DUTYCAT. NO.HEAVY DUTYCAT. NO.WPMF75-ADJ PHF75-ADJ 75PMF100-ADJ PHF100-ADJ 100PMF150-ADJ PHF150-ADJ 150PMF225-ADJ PHF225-ADJ 225PMF300-ADJ PHF300-ADJ 300PMF450-ADJ PHF450-ADJ 450LIGHT DUTYCAT. NO.MEDIUM DUTYCAT. NO.HEAVY DUTYCAT. NO.WPCT100-RE* PMF100-RC* PHF100-RC* 100PCT150-RE* PMF150-RC* PHF150-RC* 150PCT225-RE* PMF225-RC* PHF225-RC* 225PCT300-RE* PMF300-RC* PHF300-RC* 300PCT450-RE* PMF450-RC* PHF450-RC* 450 - PMF600-RC* PHF600-RC* 600W (mm)W2CABLE TRAY LIDSThe cable tray lid is available for PMF and PHF ranges of cable tray and below 75 mm and above 600 mm upon request.Lid retaining clips sold seperately (supplied in pairs).PMF/225LIDMEDIUM DUTYCAT. NO.HEAVY DUTYCAT. NO.W L mPMF/75LID PHF/75LID 75 3PMF/100LID PHF/100LID 100 3PMF/150LID PHF/150LID 150 3PMF/225LID PHF/225LID 225 3PMF/300LID PHF/300LID 300 3PMF/450LID PHF/450LID 450 3PMF/600LID PHF/600LID 600 3PMF/LC PHF/LC Lid clips

Page 15

15| TAMLEXTAMLEXACCESSORIESCable TrayMeasurements:Millimetres (mm) unless stated otherwiseSTAND OFF BRACKETSSTO9‘G’ HANGERSTGH9CAT. NO. W HSTO2 50 40STO3 75 40STO4 100 40STO6 150 40CAT. NO. SIZE HTGH2 50 150TGH3 75 150TGH4 100 165TGH6 150 200TGH9 225 220TGH12 300 255HSIZE11 mmØ7 mmCan be used reversed as cable tray hangersCAT. NO. L W H H2LDS2 50 50 70 30LDS3 75 50 70 30LDS4 100 50 70 30LDS6 150 50 70 30LDS9 225 50 70 30LDS12 300 50 70 30LIGHT DUTY SUPPORTSWLH2H11LDS6Tray is transparent for illustrative purposesFASTCONNECT ‘SNAP-ON’CABLE TRAY COUPLERPMF/FCPSnap-on couplers are fitted outside tray and are supplied as pairs without fixings. Multiple fixings positions including M6 and slotted.MEDIUM DUTY CAT. NO.PMF/FCPØ11 mmØ11 mmLWH2HCAT. NO. W HSTO9 225 40STO12 300 40STO18 450 40STO24 600 40EARTH COPPER BRAIDCAT. NO. LEBS 100• Tinned copper braid 4mm2• Hole centres 93mm• Hole size M6• Current rating 45A

Page 16

16TAMLEX |FASTCONNECT BASKET TRAY FEATURESFastConnect Basket TrayTamlex continues to innovate with its enhanced new range of FastConnect basket tray and accessories. Tamlex offers a comprehensive range of basket tray solutions for both power and data installation. The range has been designed to help reduce installation time on-site and therefore save you money. The FastConnect basket tray system is quick and easy to assemble with no tools required thanks to its patented removable coupler which adds strength and rigidity.Type of material:METAL (C4D steel wire, UNE-EN 16120-2: 2012)Ultimate tensile strength: 70 kg/mm2Yield strength: 60 kg/mm2Coating:ELECTRO ZINC (E.Z) in accordance with UNE-EN 2081: 2010Zn minimum thickness: 12 μm.FASTCONNECT BASKET TRAYFEATURES:

Page 17

17| TAMLEXTAMLEXFASTCONNECT BASKET TRAY FEATURESFastConnect Basket TrayTamlex presents its new anti-corrosion coating applied to the basket tray. After a long period of research and development with specialists in the field, the result is a superior galvanic coating. Iridescent, fluoride-free with much higher quality to the previous electro zinc and dichromate electro zinc.Higher corrosion resistance550 hours of resistance according to test of neutral salt fog (NSS) ISO 9227.Higher corrosion rating according to product standard IEC 61537.Class 6.Greener coatingThe final solution requires less chemicals, with lower levels of discharge of metal in the wastewater. Reduces costs and environmental impact.Strong, lightweight and simple to installHours of resistance according to test of neutral salt fog (NSS) ISO 9227. 50 100 150 200 250 300 350 400 450 500 550STANDARD ZINC PLATING - EZ / C2HOT DIP GALVANISED COATING - EZ / C6FastC0nnectFastEZ / C61.Labour SavingCoupler can be easily removed and repositioned if necessary4.VersatileDoes not require screws, bolts or other accessories2.Cost SavingsFastConnect couplers are pre-installed during manufacture3.ConvenienceSafer - Rounded terminations of rods to reduce risk of cable damage7.Stronger - Mechanical strength increased up to 22%6.Efficient - Substantial improvement in electrical continuity8.Compliance - In accordance with standard BS EN 61537:20075.The FastConnect Patented coupler allows for sections of basket tray to be simply joined together without tools in record time.STEP 1STEP 2STEP 3

Page 18

18TAMLEX |BTF200/60* - Supplied with BT/FX60 couplersSupplied with pre-installed FastConnect coupler.BT/LDS60 BT/LDS100Distance between supports is of 1.2 m and the maximum load is of 2 Kg/m.Ø8 mmBASKET TRAYFastConnect 60 mm - 600 mm Basket Tray (3 m Length)• Supplied with pre-installed FastConnect coupler as standard• 60mm depth as standard• Steel wire frame 4.0 mm diameter• The FastConnect coupler can be easily removed and repositioned if necessary• Supplied in 3 metre lengths• Can be powder coated to any colourPRE-FABRICATED BENDSBT/FE200LIGHT DUTY BASKET TRAY BRACKETSBASKET TRAY & SUPPORT BRACKETSC6CORROSION RESISTANCECAT. NO. W D L mBTF60/60* 60 60 3BTF100/60 100 60 3BTF150/60 150 60 3BTF200/60 200 60 3BTF300/60 300 60 3BTF400/60 400 60 3BTF600/60 600 60 3ROUNDEDTERMINATIONSIN ALL RODSC6CORROSION RESISTANCECAT. NO. W DBT/FE100 100 60BT/FE150 150 60BT/FE200 200 60BT/FE300 300 60PRE-FABRICATEDBENDSCAT. NO. W DBT/LDS60 60 110BT/LDS100 100 133FastConnect 100 - 300 mm 90° Flat ElbowFastConnect Light Duty Basket Tray SupportFastConnect Basket TrayMeasurements:Millimetres (mm) unless stated otherwisePRE-INSTALLEDFASTCONNECTCOUPLER

Page 19

19| TAMLEXTAMLEXØ11 mmACCESSORIESUNION CLAMP ASSEMBLY SIDE SUSPENSION CLIPHOLD DOWN CLAMPHOLD DOWN SUPPORTWALL BRACKETDWADWAFastConnect Basket Tray Union Clamp Assembly FastConnect Basket Tray Side Suspension ClipFastConnect Basket Tray Hold Down Bracket Sold in SinglesHold Down Bracket for Basket Tray60mm Basket tray onlyFastConnect Basket Tray Wall Bracket BT/LB200‘L’ SHAPE SUPPORT BRACKETSCAT. NO. W D ABT/LB100 170 155 70BT/LB150 220 155 70BT/LB200 270 155 70BT/LB300 370 165 70BT/LB400 470 175 70CAT. NO. W D ABT/CB100 170 215 70BT/CB150 220 215 70BT/CB200 270 215 70BT/CB300 370 215 70BT/CB400 470 215 70‘C’ SHAPE SUPPORT BRACKETSDESCRIPTION CAT. NO. PACK QTYUnion clamp assembly BT/UC 50DESCRIPTION CAT. NO.Side suspension clip BT/SSDESCRIPTION CAT. NO.Hold down clamp BT/HDDESCRIPTION CAT. NO.Hold down support BT/HD60DESCRIPTION CAT. NO.Wall bracket BT/WBBT/CB200FastConnect Basket TrayMeasurements:Millimetres (mm) unless stated otherwiseDistance between supports is of 1.2 m and the maximum load is of 10 Kg/m.Distance between supports is of 1.2 m and the maximum load is of 10 Kg/m.Ø7 mmØ7 mmØ7 mmØ11 mm x 30 mmØ11 mm x 30 mm

Page 20

20TAMLEX |ACCESSORIESCHANNEL SUPPORT CLIPCONDUIT FEED PLATESOCKET BOX ADAPTOR PLATEWATERFALL SIDE SUPPORTEARTH TERMINAL CLAMPFILLET / DIVIDERFLOOR FOOTPlastic support. CABLE SUPPORT DROP OUT PLATEPlastic support. FastConnect Basket TrayMeasurements:Millimetres (mm) unless stated otherwiseDESCRIPTION CAT. NO.Tray floor foot BT/FFDESCRIPTION CAT. NO.Cable support drop out plate BT/CSDESCRIPTION CAT. NO.Channel support clip BT/SCDESCRIPTION CAT. NO.Conduit feed plate 20/25 mmBT/CADESCRIPTION CAT. NO.Socket box adaptor plate BT/SBDESCRIPTION CAT. NO.Waterfall side support drop out plateBT/WPDESCRIPTION CAT. NO. PACK QTYEarth terminal clamp BT/EC 25DESCRIPTION CAT. NO.60 mm fillet / divider (3 m) BT/FTNot to be used with BTF60/60Snap-fit fixing

Page 21

21| TAMLEXTAMLEXACCESSORIESCan be used with threaded rod or zip wire to form a trapeze hanger to suspend 100 mm to 600 mm wide basket tray from the ceiling. Incorporates a slot push fit design for speedy fitting.SUSPENSION FRAMESPUSH FIT LIDS• Cover eliminates dirt and dust build-up on cables• Provides physical protection for cables• To mount the cover no accessories are needed – fixed by push fit designBT/SF200BT/L150Standard length - 3 metres.FastConnect Basket TrayMeasurements:Millimetres (mm) unless stated otherwiseDESCRIPTION CAT. NO. W100 mm FastConnect suspension frame BT/SF100 150150 mm FastConnect suspension frame BT/SF150 200200 mm FastConnect suspension frame BT/SF200 250300 mm FastConnect suspension frame BT/SF300 350400 mm FastConnect suspension frame BT/SF400 450600 mm FastConnect suspension frame BT/SF60 650DESCRIPTION CAT. NO. W D 100 mm Basket tray 3 m push fit lid BT/L100 100 10150 mm Basket tray 3 m push fit lid BT/L150 150 10200 mm Basket tray 3 m push fit lid BT/L200 200 10300 mm Basket tray 3 m push fit lid BT/L300 300 10400 mm Basket tray 3 m push fit lid BT/L400 400 10600 mm Basket tray 3 m push fit lid BT/L600 600 10The FastConnect Patented coupler allows for cut sections of basket tray to be simply joined together without tools in record time.ADDITIONAL BASKET TRAY COUPLERSBT/FC100DESCRIPTION CAT. NO.100 mm FastConnect basket tray coupler BT/FC100 150 mm FastConnect basket tray coupler BT/FC150200 mm FastConnect basket tray coupler BT/FC200300 mm FastConnect basket tray coupler BT/FC300400 mm FastConnect basket tray coupler BT/FC400600 mm FastConnect basket tray coupler BT/FC600Ø11 mm35 mm BRACKET FOR BTF60/60FastConnect Basket Tray Fast Fix Coupler For BTF60/60DESCRIPTION CAT. NO.Fast fix bracket BT/FX60Supplied as a pair.Rod not included.BASKET TRAY LID CLIPDESCRIPTION CAT. NO.Bracket tray lid clip BT/LCSupplied as a pair.

Page 22

Page 23

23| TAMLEXTAMLEXCSB/3 FEATURESReversible self-closing lidCSB/3/BE shown aboveService Boxes & PlatesAvailable in 3 and 4 compartment and in 4 depths ranging from 68mm to 130mm4.Options1.2x Cable outlets5.20 & 25 mm* Knockouts4.Options20 & 25mm knockouts to accept flexible conduit. * - 25 mm not available on CSB/3/S & FSB3/S2.Removable Lid3.Carpet InfillReinforced with steel plates with a recessed lid to allow 10 mm infill3.Carpet InfillAlternative metal trims available designed specifically for high traffic environments such as receptions and universities. (Can be powder coated)7.6.PolycarbonateDurable polycarbonate trim and lid as standard6.PolycarbonateCable outlets with sponge foam to prevent ingress1.2x Outlets5.20 & 25 mm* Knockouts2.Removable Lid8.Not suitable for wheeled traffic areas1. Lift up hinged lid to access the power and data sockets.2. Plug in the required leads to the available sockets.3. Close lid and position leads through the hinged access slots.Different depths available upon requestIMPORTANT: PLEASE NOTE - Service boxes are designed for use in office type environments and should not be installed in main walkways, corridors, gangways or in contact with wheeled traffic.

Page 24

24TAMLEX |3 COMPARTMENT SERVICE BOXESCAVITY BOXESCSB3/SService Boxes & PlatesMeasurements:Millimetres (mm) unless stated otherwisePlate Size:Accepts 85 mm plates onlyCAT. NO. KNOCKOUTS D A BCSB3/S 20 mm 68* 24 23CSB3/BE 20/25 mm 87 24 42CSB3 20/25 mm 100 45 35CSB3/ED 20/25 mm 130 45 65SCREED For use with 20 mm conduit.85 85 85CAT. NO. KNOCKOUTS D A BFSB3/S 20 mm 68* 24 23* - Customer notice 68 mm depth service boxes have restrictive cable capacityWLDimensions:Length: 320 mmWidth: 225 mmWLFloor cut-out size:Length: 305 mmWidth: 205 mmWLDimensions:Length: 320 mmWidth: 225 mmWLFloor cut-out size:Length: 305 mmWidth: 205 mmDAB85 85 85DAB

Page 25

25| TAMLEXTAMLEX3 COMPARTMENT SERVICE BOX PLATESPlates are manufactured in plastic coated steel (blue) with folded edges to give additional strength. The 68 mm cavity and screeded service boxes should only be fitted with flush / panel mounted (X)(X)sockets (C2GS) due to the limited depth.(X) Not suitable for 68 mm deep service boxes due to restrictive cable capacityService Boxes & PlatesMeasurements:Millimetres (mm) unless stated otherwiseFEATURES:DESCRIPTION CAT. NO. L W DTwin switched socket C2GS 192 85 12DESCRIPTION CAT. NO. L W D1x1 Gang outlet CPP04/1 192 85 121x1 Gang outlet (recessed) CPP04/1R 192 85 12DESCRIPTION CAT. NO. L W D2x1 Gang outlets CPP04/2 192 85 12DESCRIPTION CAT. NO. L W D2x Non standard sockets C2USNS 192 85 12(X)DESCRIPTION CAT. NO. L W D2 Gang outlet CPP04/D 192 85 122 Gang outlet (recessed) CPP04/DR 192 85 12DESCRIPTION CAT. NO. L W DTwin switched socket dual earth C2GS/DE 192 85 12DESCRIPTION CAT. NO. L W D2x Unswitched sockets C2US 192 85 12DESCRIPTION CAT. NO. L W D3x Unswitched sockets C3US 192 85 128512192192128585121921921285851219219212858512192192128585121921921285851219219212858512192192128585121921921285

Page 26

26TAMLEX |BLANK PLATEVOICE & DATAService Boxes & PlatesMeasurements:Millimetres (mm) unless stated otherwise3 COMPARTMENT SERVICE BOX PLATESDESCRIPTION CAT. NO. L W D4x RJ45/LJ6C (37x22 mm) CPP06 192 85 12DESCRIPTION CAT. NO. L W D6x RJ45/LJ6C (37x22 mm) CPP06/6 192 85 12DESCRIPTION CAT. NO. L W D8x RJ45/LJ6C (37x22 mm) CPP06/8 192 85 12DESCRIPTION CAT. NO. L W D10x RJ45/LJ6C (37x22 mm) CPP06/10 192 85 12DESCRIPTION CAT. NO. L W DAccept 25x50 mm & 50x50 mm modulesCDE345 192 85 12DESCRIPTION CAT. NO. L W DBlank plate CBP 192 85 12851219219212858512192192128585121921921285851219219212858512192192128585121921921285Plates are manufactured in plastic coated steel (blue) with folded edges to give additional strength. The 68 mm cavity and screeded service boxes should only be fitted with flush / panel mounted sockets (C2GS) due to the limited depth.(X) Not suitable for 68 mm deep service boxes due to restrictive cable capacityFEATURES:DESCRIPTION CAT. NO. L W D3x Twin switched sockets C3GS 192 210 122101219212192210

Page 27

27| TAMLEXTAMLEXMeasurements:Millimetres (mm) unless stated otherwiseCAVITY BOXESCAT. NO. KNOCKOUTS D A BCSB4/SL 20 mm 68 24 23For use with 20 mm conduit.SCREEDCAT. NO. KNOCKOUTS D A BFSB4/S 20 mm 68 24 23WLDimensions:Length: 320 mmWidth: 225 mmWLFloor cut-out size:Length: 305 mmWidth: 205 mm4 compartment boxes have 4 equal compartments 63.5 mm wide.Use with ‘SL’ plates only.63.563.5 63.5 63.5DABWLDimensions:Length: 320 mmWidth: 225 mmWLFloor cut-out size:Length: 305 mmWidth: 205 mm4 compartment boxes have 4 equal compartments 63.5 mm wide.Use with ‘SL’ plates only.63.563.5 63.5 63.5DAB1219263.51921263.5DESCRIPTION CAT. NO. L W DTwin switched socket - Slimline C2GS/SL 192 63.5 12BLANK PLATEDESCRIPTION CAT. NO. L W DAccept 25x50 mm & 50x50 mm modules - SlimlineCDE345/SL 192 63.5 12DESCRIPTION CAT. NO. L W DBlank plate - Slimline CBP/SL 192 63.5 121219263.51921263.51219263.51921263.5DESCRIPTION CAT. NO. L W DAccept 4x RJ45/LJ6C 37x22 mm - SlimlineCPP06/SL 192 63.5 121219263.51921263.5Service Boxes & Plates4 COMPARTMENT SERVICE BOXSERVICE BOX REPLACEMENT PARTSDESCRIPTION CAT. NO.45 mm Deep trim to fit 68/87 mm service boxes CST6865 mm Deep trim to fit 100/130 mm service boxes CST100Service box lid CSLCable flap CFCST100CSLCFCST68

Page 28

28TAMLEX |SOLID CABLE TRAYThe solid cable tray is available in 25 mm and 50 mm deep and available from 75 mm to 600 mm wide upon request.Tamlex cable tray in addition to other Tamlex product ranges are available in specific paint finishes required by the customer.SPECIALIST PAINT FINISHESSPECIAL FABRICATIONWe are a service driven business; that’s what our business was built on. We aim to give our clients fantastic prices and quality whilst meeting the tight deadlines required by today’s industry. We have a vital edge over our competition with our ability to turn around bespoke products quickly. This comes from our investment in technology and people, together with robust processes and efficient systems. We’re also committed to going that extra mile to deliver high quality on time and exceed customer expectations.Need something special or bespoke?If you need specialist or bespoke products or you can’t find the product specification you need, simply contact the Tamlex factory for further information ot email: sales@tamlex.co.ukCNC PUNCHING CNC DESIGNPOWDER COATEDSPOT WELDINGSTRUT CUT TO LENGTHCUTTINGFORMINGPRESSINGASSEMBLYSpecial FabricationSPECIAL FABRICATION

Page 29

29| TAMLEXTAMLEXCAT. NO. DIA L mSPC25-3 25 3.00SPC25 25 3.75CAT. NO. DIA L mSGC20 20 3.75CAT. NO. DIA L mSGC25 25 3.75SPC20CLASS 4 POST HOT DIPPED GALVANISEDCLASS 3 HOT DIP GALVANISEDSPC25CLASS 3 HOT DIP GALVANISEDCLASS 4 POST HOT DIPPED GALVANISED• Galvanised steel - Class 3 & Class 4.• Supplied in 3.00 & 3.75 metre lengths.FEATURES:• All conduit conforms to BS4568 part 1.• All conduit have threaded ends with one end fitted with a coupler.CAT. NO. DIA L mSPC20-3 20 3.00SPC20 20 3.7520 mm Metal Pre Galvanised Steel Conduit• All conduit have threaded ends with one end fitted with a coupler• Conduit conforms to BS 4568 pt125 mm Metal Pre Galvanised Steel Conduit• All conduit have threaded ends with one end fitted with a coupler• Conduit conforms to BS 4568 pt120 mm Class 4 Hot Dipped Metal Galvanised Steel Metal Conduit• All conduit have threaded ends with one end fitted with a coupler25 mm Class 4 Hot Dipped Metal Galvanised Steel Metal Conduit• All conduit have threaded ends with one end fitted with a couplerSTEEL CONDUITSteel ConduitMeasurements:Millimetres (mm) unless stated otherwise

Page 30

30TAMLEX |MODULAR TRUNKING FEATURESModular Flush Screed TrunkingOne of Tamlex’s strengths as a manufacturer is the ability to react to individual customer requirements. Whether the requirement is for a range of standard products to be delivered direct to a site address or it is for a complete installation kit of bespoke manufactured products Tamlex can and has met this demand.• 3 segmented compartments to accommodate service boxes.• Reinforced lid allows foot traffic.• Service boxes can be fitted after trunking is installed.• Supplied in standard 2 m lengths with couplers.MODULAR FLUSH SCREED TRUNKINGFEATURES:Screed trunking must be installed on a solid foundation and completely supported by a screed ribbon.

Page 31

31| TAMLEXTAMLEXMODULAR TRUNKING FEATURESReinforced lid allows foot trafficModular Flush Screed TrunkingSupplied to be site fitted to increase stability and reduce lid deflection4.Rubber Grommets1.Supplied in 2m Lengths5.Service Box Outlets2.Lids6.PlatesRemovable dividers provide greater flexibility when fitting service outlets3.DividersSupplied in 2 m lengths with 3 lids to accommodate service outlets1.Supplied in 2 m Lengths4.Rubber GrommetsCan be fitted in place of any 0.5 m lid section anywhere in the trunking length5.Service Box OutletsPower, voice and data plates available to accommodate customer’s needs6.Plates3.Dividers2.Lids2. Remove lid & fillet.3. Drop in service outlet box.1. Select any lid position.SERVICE BOX OUTLET FITTINGAll accessories are supplied without fixings (use Cat. No. NBM6). Service boxes can be positioned/repositioned anywhere on trunking.

Page 32

32TAMLEX |350651308513085 1301303506516835065653501683903506565350390MODULAR FLUSH SCREED TRUNKINGMODULAR FLUSH SCREED TRUNKING LENGTHSupplied in standard 2 m lengths with 4 x 0.5 m lid sections and joining coupler. Rubber grommet supplied to be site fitted.RISER BENDINTERSECTIONIntersection to be used as Flat Bend, Tee and Fourway.STOP ENDSERVICE BOX OUTLET35026262465Modular Flush Screed TrunkingMeasurements:Millimetres (mm) unless stated otherwise• 3 segregated compartments.• Reinforced lid to allow foot traffic.• Service boxes can be fitted after trunking is installed.• Internal fillets have rubber gasket to increase stability and reduce lid deflection.CAT. NO. W D L mFSM350/65/3 350 65 2CAT. NO. W HFSIRM350 350 65CAT. NO. W HFSJM350 350 65CAT. NO. W HFSBM3 350 65CAT. NO. W HFSEM350 350 65DID YOU KNOW?Service box outlets can be fitted in place of any 0.5 m lid section anywhere in the trunking length, even after the trunking is fittedScreed trunking must be installed on a solid foundation and completely supported by a screed ribbon.Suitable for modular flush screed trunking only.

Page 33

33| TAMLEXTAMLEXDFLUSH SCREED TRUNKING• 3 segregated compartments.• Shallow 25 mm deep trunking profile.• Reinforced lid to allow foot traffic.• Manufactured from continuously hot dipped zinc coated low carbon steel strip to BSEN 10346:2009.• Fillets have gasket strip fitted to increase stability and reduce lid deflection.• Intersections are 55 mm deep to allow the maximum cable capacity throughout the system.FLUSH SCREED TRUNKING LENGTHJacking bolts need to be ordered separately (M6 x 40 mm) Cat. No. TF005.2 m length complete with 2 x 1 m lids & coupler.RISER BENDINTERSECTIONIntersection - Fourway.Intersection - Flat bend.Intersection - Tee.INTERSECTIONSTOP ENDFLUSH SCREED TRUNKING SERVICE BOX702252582 70Flush Screed TrunkingMeasurements:Millimetres (mm) unless stated otherwiseCAT. NO. W D A BFSB3 220 69 24 23CAT. NO. W HFSE/91 225 25CAT. NO. W DFSJ/93 225 55CAT. NO. W HFSIR/3 225 25CAT. NO. W D L mFS225/25/3 225 25 2Screed trunking must be installed on a solid foundation and completely supported by a screed ribbon.DABSuitable for Tamlex flush screed trunking only. Intersection to be used as flat bend, tee and fourway.

Page 34

34TAMLEX |SWITCH & SOCKET BOXES1 GANG SWITCH & SOCKET BOXEST1G25T1G16 has 1 fixed lug and 1 adjustable lug.All boxes have 3 fixed lug and 1 adjustable lug.2 GANG SWITCH & SOCKET BOXEST2G35All boxes have 1 fixed lug and 1 adjustable lug.T2G35DUALHDWW DHHDWW DHSwitch, Socket & Adaptable BoxesMeasurements:Millimetres (mm) unless stated otherwiseFEATURES:The Tamlex range of switch & socket boxes are available in a wide range of styles and sizes for any domestic, commercial and industrial installations.• Switch & socket boxes conform to BS 4662.• Boxes supplied with one fixed lug & one adjustable lug.• Manufactured from continuously hot dipped zinc coated low carbon steel strip to BSEN 10346: 2009.• Switch and socket boxes are fitted with brass pillar earth terminals.CAT. NO. D W H 25x12.5 mm 20 mm 25 mmT1G16 16 72 72 3 - -T1G25 25 72 72 - 12 -T1G35 35 72 72 - 11 -T1G47 47 72 72 - 8 3T2G35DUAL has 2 x single socket apertures and dual fixed lugs.CAT. NO. D W H 20 mm 25 mmT2G25 25 132 72 16 -T2G35 35 132 72 13 3T2G47 47 132 72 10 6DUAL SWITCH & SOCKET BOXESCAT. NO. D W H K/O 20 mmT2G35DUAL 35 156 72 16KNOCKOUTSKNOCKOUTS

Page 35

35| TAMLEXTAMLEXADAPTABLE BOXESGALVANISED ADAPTABLE BOXESK962GAvailable in a wide range of styles and sizes for any domestic, commercial and industrial installations.DWHW DHSwitch, Socket & Adaptable BoxesMeasurements:Millimetres (mm) unless stated otherwiseFEATURES:• Manufactured from continuously hot dipped zinc coated low carbon steel strip to BSEN 10346: 2009.• Tamlex non-standard adaptable boxes can be manufactured in various sizes.• Adaptable boxes can also be supplied without knockouts (plain) or with knockouts as standard.• The boxes can be painted upon request.• Special sizes available.• 20 mm Knockout holesCAT. NO. W H DK331G 75 75 37K332G 75 75 50K333G 75 75 75CAT. NO. W H DK441G 100 100 37K442G 100 100 50K443G 100 100 75K444G 100 100 100CAT. NO. W H DK632G 150 75 50K642G 150 100 50K643G 150 100 75K662G 150 150 50CAT. NO. W H DK663G 150 150 75K664G 150 150 100K666G 150 150 150CAT. NO. W H DK962G 225 150 50K963G 225 150 75K993G 225 225 75K664GK643GK442GK333G

Page 36

36TAMLEX |STRUT FRAMEWORKPLAIN STRUTTS21P-3B2B TS41P-3B2BSLOTTED STRUTTS21P-3 TS41P-3TS21S-3TS41S-3Strut Framework & AccessoriesMeasurements:Millimetres (mm) unless stated otherwiseCAT. NO. H W L m GAUGETS21P-3LG 21 41 3 1.5TS21P-3 21 41 3 2.5TS41P-3LG 41 41 3 1.5TS41P-3 41 41 3 2.5CAT. NO. H W L m GAUGETS21S-3LG 21 41 3 1.5TS21S-3 21 41 3 2.5TS41S-3LG 41 41 3 1.5TS41S-3 41 41 3 2.5CAT. NO. H W L m GAUGETS21P-3B2BLG 42 41 3 1.5TS21P-3B2B 42 41 3 2.5TS41P-3B2BLG 82 41 3 1.5TS41P-3B2B 82 41 3 2.5Plain Channel Strut Framework• Rigid construction for a wide variety of applications• Manufactured from structural grade continuously hot dipped zinc coated low carbon steel strip to BSEN 10346: 2009• Channel available in both 1.5 mm and 2.5 mm thick• Supplied in 3 m lengths• Wide range of external brackets available for use with strut frame workSlotted Channel Strut Framework• Rigid construction for a wide variety of applications• Manufactured from structural grade continuously hot dipped zinc coated low carbon steel strip to BSEN 10346: 2009• Channel available in both 1.5 mm and 2.5 mm thick• Supplied in 3 m lengths• Wide range of external brackets available for use with strut frame workBACK TO BACKBack to Back Channel Strut Framework• Rigid construction for a wide variety of applications• Manufactured from structural grade continuously hot dipped zinc coated low carbon steel strip to BSEN 10346: 2009• Channel available in both 1.5 mm and 2.5 mm thick• Supplied in 3 m lengths• Wide range of external brackets available for use with strut frame workDID YOU KNOW?Tamlex strut framework can be supplied pre-cut to any length to suit customer requirements.

Page 37

37| TAMLEXTAMLEXACCESSORIES2 HOLE RIGHT ANGLE BRACKETTA105-21TB202INTERNAL COUPLERSInternal couplers c/w fixing screws. EXTERNAL COUPLERS3 HOLE RIGHT ANGLE BRACKETSQUARE PLATESFLAT PLATESTB104TB101-10Pack quantity: 100 per pack.Use with channel nuts.4 HOLE GUSSET SUPPORT BRACKETCAT. NO. SIZETB145 100 x 804 HOLE RIGHT ANGLE BRACKETCAT. NO. SIZETB144 100 x 80CAT. NO. SIZETB142 100 x 40CAT. NO. SIZETB140 40 x 40CAT. NO. SIZETB201 21 x 41TB202 41 x 41CAT. NO. SIZETA105-21 21 x 41TA105-41 41 x 41DESCRIPTION CAT. NO.For use with M12 rod, 2 x 14 mm hole TB102For use with M12 rod, 3 x 14 mm hole TB103For use with M12 rod, 4 x 14 mm hole TB104For use with M12 rod, 5 x 14 mm hole TB105DESCRIPTION CAT. NO.For use with M6 rod, 8 mm hole TB101-6For use with M8 rod, 10 mm hole TB101-8For use with M10 rod, 12 mm hole TB101-10For use with M12 rod, 14 mm hole TB101-12DOUBLE CORNER BRACKET4 HOLE GUSSET L-SHAPE BRACKETDESCRIPTION CAT. NO.4 Hole ‘L’ shape gusset bracketTB147DESCRIPTION CAT. NO.4 Hole double corner bracketTB146135° ANGLE BRACKETDESCRIPTION CAT. NO.2 Hole 135° bracket TB148Measurements:Millimetres (mm) unless stated otherwiseStrut Framework & Accessories

Page 38

38TAMLEX |ACCESSORIES45° TEE BRACKETL BRACKETTB1552 HOLE STEP-UP BRACKETStrut Framework & Accessories45 ° ANGLE BRACKETDESCRIPTION CAT. NO.2 Hole 45° TB149DOUBLE TEE BRACKETTEE BRACKETDESCRIPTION CAT. NO.4 Hole flat tee bracket TB152DESCRIPTION CAT. NO.8 Hole double tee bracketTB151CHANNEL SUPPORT BRACKETCORNER SUPPORT BRACKETSDESCRIPTION CAT. NO.Right hand TB155Left hand TB154DESCRIPTION CAT. NO.4 Hole corner channel support bracketTB153DESCRIPTION CAT. NO.3 Hole flat bend bracket TB161DESCRIPTION CAT. NO.4 Hole 45° tee bracket TB156DESCRIPTION CAT. NO.3 Hole 40 mm step up bracket TB172DESCRIPTION CAT. NO.2 Hole 20 mm step up bracket TB1713 HOLE STEP-UP BRACKET4 HOLE STEP-UP BRACKETDESCRIPTION CAT. NO.4 Hole 80 mm step up bracket TB173Measurements:Millimetres (mm) unless stated otherwiseTB154

Page 39

39| TAMLEXTAMLEXStrut Framework & AccessoriesMeasurements:Millimetres (mm) unless stated otherwiseACCESSORIES3 HOLE TOP HAT BRACKETDESCRIPTION CAT. NO.3 Hole 20 mm top hat TB1745 HOLE TOP HAT BRACKET6 HOLE TOP HAT BRACKETDESCRIPTION CAT. NO.6 Hole 80 mm double top hat bracketTB177DESCRIPTION CAT. NO.5 Hole 40 mm top hat TB175Used with channel nut, not included.Used with channel nut, not included.Cone pointed screws (TF050) supplied.‘U’ BRACKETGIRDER CLAMPDESCRIPTION CAT. NO.1 Hole girder clamp TB251DESCRIPTION CAT. NO.4 Hole ‘U’ double bracketTB178‘U’ BOLTDESCRIPTION CAT. NO.40 mm ‘U’ bolt TB252-41GIRDER CLAMPDESCRIPTION CAT. NO.2 Hole girder clamp TB253Cone pointed screws (TF050) supplied.Cone pointed screws (TF050) supplied.TB256-21WINDOW HOLE CLAMPSGIRDER CLAMPDESCRIPTION CAT. NO.‘U’ shape girder clamp TB254Cone pointed screws (TF050) supplied.GIRDER CLAMPDESCRIPTION CAT. NO.‘U’ shape girder clamp TB255DESCRIPTION CAT. NO.21 mm Hole clamp TB256-2141 mm Hole clamp TB256-41Suitable for: 21 x 41 & 41 x 41.

Page 40

40TAMLEX |CANTILEVER ARMS TC103-15LONG SPRINGSCHANNEL NUTSACCESSORIESStrut Framework & AccessoriesBASE PLATE BRACKETDESCRIPTION CAT. NO.Corner base plate bracket TB211-2BASE PLATE BRACKETDESCRIPTION CAT. NO.Double base plate bracket TB212BASE PLATE BRACKETDESCRIPTION CAT. NO.Gusset base plate bracket TB213DESCRIPTION CAT. NO.150 mm Long arm - plain TC103-15300 mm Long arm - plain TC103-30450 mm Long arm - plain TC103-45600 mm Long arm - plain TC103-60750 mm Long arm - plain TC103-75Note: TA103-P will not fit light duty strut.COVERDESCRIPTION CAT. NO.3 m Plastic cover TA103-PEND CAPS TA101DESCRIPTION CAT. NO.21 mm End cap (White) TA10241 mm End cap (White) TA10121 mm End cap (Black) TA102B41 mm End cap (Black) TA101BPLAIN TN10PCAT. NO. SIZETN6P M6TN8P M8TN10P M10TN12P M12SHORT SPRINGS TN10SSCAT. NO. SIZETN6SS M6TN8SS M8TN10SS M10TN12SS M12TN10LSCAT. NO. SIZETN6LS M6TN8LS M8TN10LS M10TN12LS M12BASE PLATE BRACKETDESCRIPTION CAT. NO.Single base plate bracket TB211-1Measurements:Millimetres (mm) unless stated otherwise

Page 41

41| TAMLEXTAMLEXGeneral FixingsMeasurements:Millimetres (mm) unless stated otherwiseFIXINGSM6 SET SCREW BOLTS (HIGH TENSILE)Pack Quantity: 100 per pack.Pack Quantity: 100 per pack. Pack Quantity: 100 per pack.TF022TF019CONE SET SCREWSPack Quantity: 100 per pack.ROOFING NUTS & BOLTSHEXAGONAL NUTSDROP-IN ANCHORSSTUD CONNECTOR WEDGE NUTPack Quantity: 100 per pack. Pack Quantity: 100 per pack.Pack Quantity: 100 per pack.Pack Quantity: 100 per pack.Pack Quantity: 200 per pack.TF025TF061TF048 TF058TF071TF013THREADED RODSDESCRIPTION CAT. NO.M6 x 3 m Long TF021M8 x 3 m Long TF022M10 x 3 m Long TF023M12 x 3 m Long TF024TF030FLAT WASHERSDESCRIPTION CAT. NO.M6 TF030M8 TF031M10 TF032M12 TF033TF037SHAKE PROOF WASHERSDESCRIPTION CAT. NO.M6 TF034M8 TF035M10 TF036M12 TF037Pack Quantity: 100 per pack.TF041PENNY WASHERSDESCRIPTION CAT. NO. DESCRIPTION CAT. NO.M6 x 25 mm TF038 M6 x 32 mm TF042M8 x 25 mm TF039 M8 x 32 mm TF043M10 x 25 mm TF040 M10 x 32 mm TF044M12 x 25 mm TF041 M12 x 32 mm TF045DESCRIPTION CAT. NO.M6 x 20 mm TF001M6 x 25 mm TF002M6 x 30 mm TF003M6 x 35 mm TF004M6 x 40 mm TF005M8 SET SCREW BOLTS (HIGH TENSILE)Pack Quantity: 100 per pack.DESCRIPTION CAT. NO.M8 x 20 mm TF006M8 x 25 mm TF007M8 x 30 mm TF008M8 x 35 mm TF009M8 x 40 mm TF010M10 SET SCREW BOLTS (HIGH TENSILE)Pack Quantity: 100 per pack.DESCRIPTION CAT. NO.M10 x 20 mm TF011M10 x 25 mm TF012M10 x 30 mm TF013M10 x 35 mm TF014M10 x 40 mm TF015M12 SET SCREW BOLTS (HIGH TENSILE)Pack Quantity: 100 per pack.DESCRIPTION CAT. NO.M12 x 20 mm TF016M12 x 25 mm TF017M12 x 30 mm TF018M12 x 35 mm TF019M12 x 40 mm TF020TF008TF002CAT. NO. SIZETF025 M6 x 12 mmTF026 M6 x 16 mmTF027 M6 x 20 mmTF028 M6 x 25 mmTF029 M6 x 30 mmCAT. NO. SIZETF050 M10 x 40CAT. NO. SIZE CAT. NO. SIZETF046 M6 TF048 M10TF047 M8 TF049 M12CAT. NO. SIZE CAT. NO. SIZETF055 M6 TF057 M10TF056 M8 TF058 M12CAT. NO. SIZE CAT. NO. SIZETF059 M6 TF061 M10TF060 M8 TF062 M12CAT. NO. SIZETF068 M6TF069 M8TF070 M10TF071 M12

Page 42

42TAMLEX |TECHNICAL INFORMATIONTechnical Information50501501007515010075200200225225300300TRE22 / MRE22 TRE44 / MRE44TRE33 / MRE33IMPORTANT: Cable trunking is designed such that the main body carries the weight of the cables, Trunking should NOT be installed in any way that causes the lid to carry the cable weight.LIGHTING TRUNKINGLPL4732 - 34LTB3/45 Internal Dimensions505034Support centres maximum 3 metreTrunking Lid supplied in 2 metre lengths as standard and are manufactured to fit LTB trunking body.TRE66 / MRE66TRUNKING SIZE505015010075150100752002002252253003005050150100751501007520020022522530030050501501007515010075200200225225300300TRUNKINGSIZE (mm)SIZE OF TRUNKINGCAT. NO.NOMINAL CONDUCTOR SIZE1.0 1.5 2.5 4.0 6.0 10.0 16.0 25.0 35.0 50.0 70.0 95.050 x 50 138 123 85 67 52 33 24 16 12 9 7 575 x 50 208 185 128 101 79 51 37 24 18 13 10 775 x 75 312 273 191 152 118 76 55 37 28 20 16 11100 x 50 277 247 170 135 95 67 49 39 25 18 14 10100 x 75 416 370 256 203 158 101 74 49 37 27 21 15100 x 100 555 494 350 271 211 135 98 66 50 37 28 21150 x 75 624 556 382 304 237 152 111 74 56 41 32 23150 x 100 833 741 510 406 316 203 148 99 75 55 42 31150 x 150 1250 1112 766 609 475 305 222 148 112 83 64 47TRUNKING SIZE NOMINAL CONDUCTOR SIZE WEIGHTSURFACE (mm) 1.0 1.5 2.5 4.0 6.0 10.0 16.0 25.0 PER Kg/mLTB3/45 50 x 50 138 123 98 67 52 33 24 16 1.45

Page 43

43| TAMLEXTAMLEXTechnical InformationTECHNICAL INFORMATIONHOLE PATTERN81662.525COUPLERS FOR RETURN EDGE TRAYLight Duty10152550The Tamlex range of PCT cable tray can be site fabricated to produce flat bends, tees and fourway sections using roofing nuts & bolts.LOAD TEST DATA EXAMPLETamlex PMF 100 Medium Duty TrayMaximum Safe Working Load (Kg/m)GENERAL CABLE TRAY DATASnap-on couplers are fitted outside tray and are supplied as pairs without fixings. Multiple fixings positions including M6 and slotted.Return flanged tray couplers do not require the tray to be drilled, even when the tray has been cut.Assembly nuts and bolts are supplied separately (Cat. No. TF025).Hole pattern designed to provide maximum flexibility for positioning cable ties etc.Span (Metres)MCTCABLE TRAYSIZE (mm)25 mm Deep Return Edge TrayMMF50 mm Deep Return Edge TrayMHFTray is transparent for illustrative purposes30309.5

Page 44

44TAMLEX |TECHNICAL INFORMATIONTechnical InformationElectrogalvanised (ELECTROZINC/EZ)A steel base coated with a zinc layer by electrolysis, by means of submerging the lengths in a bath composed of a zinc solutions, in accordance with BS EN ISO 2081. Depending on the type of zinc layer, it will have a different degree of protection on the steel, avoiding corrosion and enhancing the visual appearance of the length. This treatment is carried out once the length has been welded.The IEC 61537 Standard classifies the degree of resistance to corrosion of the system’s components depending on the steel’s electrolytic covering, belonging to Class 1 those with a minimum thickness of 5μm and to Class 2 those of 12μm. Tamlex uses Class 6 as its standard material for its basket tray in order to guarantee the quality of its products against corrosion. This treatment is used in dry environments free of pollutants.The allowable working load (AWL) is the maximum load which can be applied during normal use, without danger. Therefore, the workload shall always be less than the AWL.The AWL of our products are calculated in accordance with BE EN 61537.For earth bonding requirements please refer to the current Wiring Regulations BS7671 and all current amendments.The distance between supports is of 1.2m and the maximum load is of 10Kg/m.The distance between supports is of 1.2m and the maximum load is of 2Kg/m.Tamlex presents its new anti-corrosion coating applied to the basket tray. After a long period of research and development with specialists in the field, the result is a superior galvanic coating. Iridescent, fluoride-free with much higher quality to the previous electrozinc and dichromate electro zinc.The final solution requires less chemicals, with lower levels of discharge of metal in the wastewater. Reduces costs and environmental impact.FastConnect Coupler IncludedPre-Fabricated BendsTool Free InstallationCoupler Can Be EasilyRemoved and RepositionedSafety Edge To Avoid Damage To CablesElectrical ContinuityCompliant to EN 61537Hours of resistance according to test of neutral salt fog (NSS) ISO 9227. 50 100 150 200 250 300 350 400 450 500 550STANDARD ZINC PLATING - EZ / C2HOT DIP GALVANISED COATING - EZ / C6FastC0nnectFastEZ / C6NEW INNOVATIVE PLATED FINISH OFFERING SUPERIOR PROTECTION AGAINST CORROSIONd (mm)NAWL = (Newtons/m) ; d = distance between supports (mm)1 Newton = 0.102 kg.MATERIALSUPPORT BRACKETLIGHT DUTY SUPPORT BRACKETEARTH BONDINGALLOWABLE WORKING LOAD AWL (N/m)HIGHER CORROSION RESISTANCE550 hours of resistance according to test of neutral salt fog (NSS) ISO 9227.HIGHER CORROSION RATING ACCORDING TO PRODUCT STANDARD IEC 61537Class 6.GREENER COATINGBASKET TRAYTRUNKINGMINIMUM WORKING TEMPERATUREMAXIMUM WORKING TEMPERATUREACCORDING TO STANDARD60 mm FastConnect Basket Tray -40°c +150°c BS EN 61537

Page 45

45| TAMLEXTAMLEXTechnical Information3 Compartment (mm) 4 Compartment (mm)63.563.563.563.5858585Floor Cut Out ApertureSERVICE BOXES COMPARTMENT OPTIONS281450SLOTTED STRUT HOLE DIMENSIONSLength 3.0 mCOUPLERSInternalExternal8512192Full Width Service PlatesCSB3, CSB/3/BE, FSB3, CSB3/EDCSB4/SL3052051219263.5SL Style Service PlatesPLATE DIMENSIONSSTRUT FRAMEWORK SYSTEMMaterial: 2.5 mm thick cold rolled steel (also available in 1.5 mm)TECHNICAL INFORMATIONSTRUT FRAMEWORK SYSTEMMaterial: 2.5 mm thick cold rolled steel (also available in 1.5 mm)2241222241418221TS21P-3 / TS21S-3 TS41P-3 / TS41S-3 BACK TO BACK22412222414182212241222241418221IMPORTANT: PLEASE NOTE - Service boxes are designed for use in office type environments and should not be installed in main walkways, corridors, gangways or in contact with wheeled traffic.

Page 46

46TAMLEX |FLUSH SCREED TRUNKINGScreed trunking must be fully supported across its complete width. The minimum screed depth is 68 mm. Service boxes should be installed when the trunking is fitted. Please see technical details for Service Boxes above.70225252925682 70Flush Screed Cross Section FSB3MODULAR FLUSH SCREED TRUNKING3506513085130Modular Flush Screed Cross SectionModular flush screed trunking must be fully supported across its complete width.Modular Flush Screed Service Box FSBM335026262465TECHNICAL INFORMATIONTechnical InformationThis innovative and customisable system can be installed in new developments or in an existing installation. Below are some of our installation guidelines that needs to be considered when using this system.1.Access (Existing Installations Only). Adequate space needs to be cut in the screed to allow access for trunking system and access for installation tools.2.Solid Foundation. Screed trunking must be installed on a solid foundation and completely supported by a screed ribbon approved by an consultant or architect.3.Lids and Service Boxes. The galvanised trunking lids and service boxes should be in position before the screed is poured to ensure the pressure of the screed does not distort the side walls of the trunking.4.Levelling. Once the trunking is levelled and before coupling together, the screed ribbon/bedding should be packed under the trunking to remove the possibility of any voids which could create soft spots in the trunking system.5.Finishing. Take care when pouring the screed. The screed should be compacted to provide a fixed support for the trunking system and its contents. Ensure the screed is smoothly finished to the trunking lid to prevent any lines showing on the final flooring finish.MODULAR FLUSH SCREED TRUNKINGFLUSH SCREED TRUNKING

MP 275 - Tamlex Catalogue V2.2 - Web

Page 1

Page 2

Page 3