LOPFI Change Instrucons To change all current Employees at once: 1. Go to your Employees screen. Select all employees (Click on one employee and then, holding down the control key [Ctrl], press A). All employees should be highlighted (typically in blue) on your screen. 2. Click the Mass Update buon at the boom of the screen. 3. Click Next 4. Choose Deducon, Next. 5. Select LOPFI, Next 6. Choose Add Eecve Date, Next 7. Enter 7/1/2023 as the new eecve date. Next. It will update and show you the changes. Click Next again. System will ask, ‘are you sure’? Click Yes. Then click Finish. 8. If you have non-contributory employees you will want to “deselect” them. To do so, hold down the control key [Ctrl] and individually click on each of these employees, unhighlighng them. Everyone else should remain highlighted. 9. Click the New buon 10. Choose Deducons, Next. 11. Choose LOPFI, Next. 12. Select the date 07/01/2023, Next 13. Select Rate, Next
14. Change the rate at the boom to 3.5% and click Next 15. Will display changes, if they look good, click Next. Will ask, ‘are you sure’? Click Yes 16. Click Finish **Verify that any non-contributory employees kept their 0.0% rate** To change the default employee percentage for future new employees: 1. Click the SETUP menu, Payroll Details, and choose EMPLOYERS. 2. Your City name should come up in a list. Double click on it. 3. Go to the Deducons & Benets tab. 4. Find LOPFI in the top secon and click on the Employee part of the deducon
5. On the right side of the screen make sure your informaon matches what is listed below: 6. Click SAVE.