Return to flip book view

GENERALwww.kleanvak.comCATALOG2024.

KKROTATING ACCESSORIES105A MK4 MACHINECLIPPING ACCESSORIESCONSUMABLESFILTERSSERVICES010203040506

Summary04KLEANVAK 105A MK4 MACHINEDescriptionTechnical dataAccessories included with the machineWorkstation equipmentROTATING ACCESSORIESStraight rotating brush90° rotating brushCleanerCountersink cleanerSanding machine nanoEcreteuseCLIPPING ACCESSORIESRelease agent brush / Release agent rotating brushSqueegee brush / Triangle brushOblong brushHubsElbowsTelescopic extensionFlexible extensionCONSUMABLESBrush’s nose - Ø40 to Ø80Brush - Ø40 to Ø80Finishing brush - Ø40 to Ø80Stripping brush - Ø40 to Ø80Squeegee brushTriangle brush / Oblong brushRelease agent applying rulerSanding machine pad - Ø30 to Ø80Paper disk - Ø30 to Ø80Scotch brite disk - Ø30 to Ø80Cleaning disk - Ø30 to Ø80 FILTERSFilters FCA - 100Filters FHA - 10KLEANVAK SERVICESKleanvak MaintenanceKleanvak original spare parts INTRODUCTION1820212226272829303136373840424344484950515253545556575862636869010203040506

Introduction Page - 04TOGETHER, WE PRESERVE THE ENVIRONMENT AND YOUR SAFETY

Introduction Page - 05

Introduction Page - 06THE KLEANVAK MACHINE...A MULTI-TASK SOLUTION : INNOVATIONS FOR NEWPROSPECTS

Introduction Page - 07

Introduction Page - 08The environment protection, involves taking measures in order to limit or cancel the negative impact of Men’s activities on his environment. The workers protection consists in making use of means so as to limit or cancel the risks related to the danger due to the nature of the work done.In the industry, paints, equipment and parts cleaning, stripping, appli-cation of unmolding agents, ... many workers are in contact with solvent, sometimes without knowing it.A regular exposure, even a low quantity can be the cause at more or less long term of health problems, some of them being non-reversible.KLEANVAK made of this observation his main point and propose new equipment, that permit to the employee in touch with all kind of solvent to word with safety.KLEANVAK, it is a range of equipment permitting to workers whose task is to sand, clean all kind of surface thanks to either solvent product either not and applying an unmolding agent safely, while preserving the environment.KLEANVAK proposes equipment that combine sanding, application of cleaning liquid, brushing of concerned zones, application of unmolding agent, suction and recuperation of soiled liquid and vapors of solvent products.Some applications :Cleaning of diverse parts after machining/drillingCleaning of parts after applying mastic of waterproofness (PR type) Cleaning of engine’s element during the maintenance timeApplication unmolding agent for tools of molding / polymerizationMechanical stripping of surfacesCleaning of equipment (tool machines/vehicles/basket.....)

PICTOGRAMS USED AbrasiveSanding, stripping...InjectionAll kind of liquid.Stripping applicationAll kind of liquid stripping agent.SuctionSuction of liquid from chip and vapors.SpinningRotation thanks to a pneumatic engine.Without electrical connectionMachine does not need power supply.Eco efficiencyMachine throwing out zero VOC.EffortlessAccessory requiring few effort for a without tiredness.Compressed AirPneumatic energy machine.Adjustable throughputInjection of adjustable liquid in order to regulate the consummation to the need.Noise levelNoise level of devices expressed in dB(A).Absorb the smellsZero vapor emission.Introduction Page - 09

Introduction Page - 10A REAL MASS OF ENERGYThe KLEANVAK machines guaranty to you a level of efficiency never reached before in exploitation. A new technology for a reinforced productivity and a comfort never seen before for the users.

Introduction Page - 11PNEUMATIC ENERGY

12Introduction Page - 120% VOC REJECTEDWith her innovative filter technology. The KLEANVAK machine decontaminate for a long time your working space. Perfor-mance of suction, higher productivity, big using comfort, design, the KLEANVAK machine innovate in all the fields.

Introduction Page - 13NO SMELL NO REJECT

Introduction Page - 14AN EFFICIENT WORK WHITOUT BEING TIREDSanding accessories and rotary cleaning accessories KLEANVAK permit an effortless work with an optimal effi-ciency.The concept of this equuipment makes them unique accessories and multi- purpose adapting to all kind of needs.

Introduction Page - 15ROTATING ACCESSORIES EFFORTLESS

Machine Page - 16

KKROTATING ACCESSORIES105A MK4 MACHINECLIPPING ACCESSORIESCONSUMABLESFILTERSSERVICES010203040506Machine Page - 17

MACHINE01105A MK4 MODEL:EMISSIONS IN THE INTERNAL AIRA+ CA BA+The 105A MK4 machine model uses an active charcoal filter model FCA-100.x1The 105A MK4 machine model is specifically studied for the use of all kind of solvent liquid (Cleaning liquid, Unmolding agent...). 2024 new model allow you to connect two type of solvent and to switch to one to the other one.The 105A MK4 machine model combine the applica-tion of liquid, brushing of zones that needs to be trea-ted, suction and recupera-tion of soiled liquid and vapors from solvent pro-ducts.52kg0,8 m0,9 mDescription Page - 18

MACHINE01Main assets for sanding/stripping- Spinning accessories permitting an effortless work.- Suction of 98% of dirt during the sanding/stripping.- It is possible to inject liquid during the sanding/stripping.- Accessibility to difficult zones with small diameters of sanding/stripping.Main assets for cleaning- Spinning accessories permitting an effortless work.- Injection of solvent or non-solvent liquid.- Suction of liquid, dirt, chip and vapors (VOC).- It is possible to inject liquid during the cleaning.- Accessibility to difficult zones with small diameters of cleaning.Main assets for the application of unmolding agents- Controlled deposit of a layer of unmolding (FREKOTE type).- Suction of vapors (VOC).- Almost instant dying of the deposited layer.- Perfect mastering of the quantity of deposited product.- Homogeneous and smooth application of the unmolding layer (no bump, no microbubbles).- Accessibility to difficult zones with specific accessories. Main advantagesBetter protection of the worker(no contact with the product). Doing the work without using a suction booth.Doing the work directly in the production zone. Working in co-activity.Canceling the application by wipes. Saving some product. Reduce the application time.Description Page - 19

MACHINE01Temperature using range (°C): -20 à +60Depression max (mbar) : 910Air throughput (L/min) : 8400Noise level at 1,5 meters (dB(A) ISO 3744) : 55 Inside diameter of the suction tube (mm) : 40Length maxi of the suction tube (m) : 8Solvent injection system : Pump (possibility to switch between two type of solvent) Volume of the receiving cistern (liters) : ≈ 7Filtration system : active charcoal filterDetection system of filters saturation : yes - PID sensor electronicTECHNICAL DATAAlimentation : Dry airConstant pression needed (bar) : 7Standard air consumption (Venturi) (L/min - at 7 bar) : 1810Standard air consumption (Venturi) (M³/h - at 7 bar) : 109Max air consumption (Venturi + Moteur) (L/min - at 7 bar) : 2114Max air consumption (Venturi + Moteur) (M³/h - at 7 bar) : 127Connection : 1/2’’ GAlimentation of the detection system : Autonomous - turbine generatorENERGY - CONNECTIONDIMENSIONS - MASSDimensions (L x l x H) (mm) : ≈ 870 x 420 x 945Mass (kg) : ≈ 52 kg (vacuous)PRODUCT USED (1) : DIESTONE DLS ACETONEIPA / ALCOOL ISO CARECLEAN AS 1 TECHNICLEAN OX 1 METHYL ETHYL KETONEFREKOTE (700 NC / .... )DEPARTURE........(1) Non-exhaustive listTechnical caracteristics Page - 20

MANUEL UTILISATEURKleanVakMACHINE KLEANVAKSystème breveté KLEANVAKRéf. MU2023-FR-01105A MK4Manual Charger BatteryAAA batteryLi-Ion 3,7V 600mAh Ref: KOK-80-87 QT: 2Li-Ion charger for 2 batteriesRef: KOK-80-88 QT: 1User manualSpare parts manualMACHINEKOK-105A MK4The Kleanvak machine is delivered in its transport box with standard accessories.*Tube hubClip-on nozzle, brush support Ø40, Ø60, Ø80. Allows injection and aspiration.Flexible extensionClip-on extension. Allows you to clip accessories to suit all situations.Unmolding brush *Clip-on brush. Suitable for applying mold release and extracting vapors.Brush Ø80 mmThe brushes are resistant to most solvents. Its design ensures suction and injection.Brush Ø60 mmThe brushes are resistant to most solvents. Its design ensures suction and injection.Brush Ø40 mmThe brushes are resistant to most solvents. Its design ensures suction and injection.* Accessory not compatible with the MEK (Other solvents contact us). 1220mm1150mm650mm75kgRef: KOK-20-4 QT: 1Ref: KOK-20-1 QT: 1 Ref: KOK-20-30-280 QT: 1Ref: KOK-1-80 QT: 1Ref: KOK-2-80 QT: 1Ref: KOK-1-60 QT: 1Ref: KOK-2-60 QT: 1Ref: KOK-1-40 QT: 1Ref: KOK-2-40 QT: 1Ref: KOK-20-30-2-280 QT: 1* Please note, the power connections and the supply hose are not supplied.For more information on supply fittings and hoses → Page 22MACHINE01Included accessories Page - 21

MACHINE01GENERAL PRECAUTIONS- Read and make sure all operators read carefully before performing any operations.- Before any operation, disconnect the air circuit in order to work without pressure.Alimentation : Dry air Air consumption (L/min at 7 bar) : 1810Constant pression needed (bar) : 6 Air consumption (m3/h at 7 bar) : 109Maximum inlet pressure (bar) : 8 Air consumption (CFM at 7 bar) : 62ENERGY - CONNECTION :Workshop equipment Page - 22Workshop connection1132Supply hose2Machine connection3* The Staubli brand is not mandatory but it’s necessary to respect the threads of the machine and the diameter of the fittingsN° DESIGNATION REFERENCE QT3Staubli plug RBE 11 - Thread G1/2 RBE11.6153 12.1 Staubli plug RBE 11 - Hose Ø19 RBE11.6819 11 Staubli socket RBE 11 - Thread G1/2 RBE11.1153 12.3 Staubli socket RBE 11 - Hose Ø19 RBE11.1819 12.2 Air hose - 8 bar - Øint 19 xxxx 12.12.22.31/2’’G Ø11Ø11 1/2’’GØ11Ø11* NOT PROVIDED WITH THE MACHINE *

MACHINE01Workshop equipment Page - 23INTENTIONALLY LEFT BLANK

Rotating accessories Page - 24

Rotating accessories Page - 25KKROTATING ACCESSORIES105A MK4 MACHINECLIPPING ACCESSORIESCONSUMABLESFILTERSSERVICES010203040506

ROTATTING ACCESSORIES02Straight rotating brush Page - 26Speed : 860 lap/minConsumption (at 7bar) : - 304 L/min- 18 M³/h Power : 150 WattTorque : 1,5 NmMass : 0,7 kgACCESSORY DESIGNATION REFERENCEStraight rotating brush KOK-20-21TECHNICAL DATAStraight rotating brushMotorized brush (pneumatic energy) can be clipped on the ergonomic handle.More adapted for vertical works.Made for receiving all kind of round brushes for cleaning/removing grease marks. Pneu-matic rotation permits an effortless clea-ning.COMBINATION EXAMPLEBrush Ø40 mmRef : KOK-1-40Ref : KOK-2-40Brush Ø60 mmRef : KOK-1-60Ref : KOK-2-60Brush Ø80 mmRef : KOK-1-80Ref : KOK-2-80* see chapter «04 CONSUMABLES» Page 47

ROTATTING ACCESSORIES02Speed : 860 lap/minConsumption (at 7bar) : - 304 L/min- 18 M³/h Power : 150 WattTorque : 1,5 NmMass : 0,7 kgACCESSORY DESIGNATION REFERENCE90° Rotating brush KOK-20-22TECHNICAL DATA90° Rotating brushMotorized brush (pneumatic energy) can be clipped on the ergonomic handle. More adapted for horizontal works. Made for receiving all kind of round brushes for cleaning/removing grease marks. Pneuma-tic rotation permits an effortless cleaning.COMBINATION EXAMPLE* see chapter «04 CONSUMABLES» Page 47Brush Ø40 mmRef : KOK-1-40Ref : KOK-2-40Brush Ø60 mmRef : KOK-1-60Ref : KOK-2-60Brush Ø80 mmRef : KOK-1-80Ref : KOK-2-8090° Rotating brush Page - 27

ROTATTING ACCESSORIES02Cleaner Page - 28Speed : 860 lap/minConsumption (at 7bar) : - 304 L/min- 18 M³/h Power : 150 WattTorque : 1,5 NmMass : 0,7 kgACCESSORY DESIGNATION REFERENCECleaner KOK-20-28TECHNICAL DATACleanerMotorized accessory (pneumatic energy) can be clipped on the ergonomic handle.Made to receive all kind of consumables : scotch brite and cleaning disk.The pneumatic rotation permits an effort-less work.COMBINATION EXAMPLECleaning disk Ø 50 - Ø 80 mm Ref : KOK-5-...* see chapter «04 CONSUMABLES» Page 47Scotch brite Ø 50 - Ø 80 mm Ref : KOK-4-...

ROTATTING ACCESSORIES02Speed : 860 lap/minConsumption (at 7bar) : - 304 L/min- 18 M³/h Power : 150 WattTorque : 1,5 NmMass : 0,7 kgACCESSORY DESIGNATION REFERENCECountersink cleaner KOK-20-29TECHNICAL DATACountersink cleanerMotorized accessory (pneumatic energy) can be clipped on the ergonomic handle. Designed for countersink cleaning. Made to receive all kind of different diameter swab. The pneumatic rotation permits an effort-less work.COMBINATION EXAMPLE* see chapter «04 CONSUMABLES» Page 47Swab Ø5 mm - Ø12 mmRef : KOK-2-EC-...Countersink cleaner Page - 29

ROTATTING ACCESSORIES02Sanding machine nano Page - 30Speed : 5500 tr/minConsumption (at 7bar) : - 304 L/min- 18 M³/h Power : 150 WattTorque : 1,5 NmMass : 0,57 kgDiameter : 30 mmACCESSORY DESIGNATION REFERENCESanding machine nano KOK-20-25TECHNICAL DATASanding machine nanoMotorized accessory (pneumatic energy) can be clipped on the ergonomic handle. Adapted for sanding, stripping and cleaning medium surfaces. Made to receive all kind of consu-mables : sandpaper, scotch brite, cleaning disk... It is also adapted for metallic and composites parts.The pneumatic rotation permits an effortless work.COMBINATION EXAMPLECleaning disk Ø30 mm Ref : KOK-5-30* see chapter «04 CONSUMABLES» Page 47Paper disk Ø30 mmRef : KOK-3-30-...Scotch brite disk Ø30 mmRef : KOK-4-30-...

ROTATTING ACCESSORIES02Speed : 30 000 tr/minConsumption (at 7bar) : - 304 L/min- 18 M³/h Power : 150 WattTorque : 1,5 NmMass : 0,6 kgACCESSORY DESIGNATION REFERENCEDeflashing machine KOK-20-32TECHNICAL DATADeflashing machineMotorized accessory clips onto the ergono-mic handle. Suitable for deburring compo-site parts. Designed to accommodate a range of machining cutters depending on the need. Pneumatic rotation allows effort-less work.COMBINATION EXAMPLEDeflashing machine Page - 31

ROTATTING ACCESSORIES02Page - 32INTENTIONALLY LEFT BLANK

ROTATTING ACCESSORIES02Page - 33INTENTIONALLY LEFT BLANK

Clipping accessories Page - 34

Clipping accessories Page - 35KKROTATING ACCESSORIES105A MK4 MACHINECLIPPING ACCESSORIESCONSUMABLESFILTERSSERVICES010203040506

CLIPPING ACCESSORIES03Brush Page - 36Length : 280 mmOther lenght: contact usInjection: Flat squirt tubeACCESSORY DESIGNATION REFERENCERelease agent brushdelivered with a set of 2 mopping pad ** see chapter « CONSUMABLES » Page 47KOK-20-30-280TECHNICAL DATARelease agent brushClipping brush on the ergonomic handle, the different extension and elbow. Adapted for release agent application and vapors. Application homoge-nous and smooth application of the release agent layer. Different width in order to be adapted to all kind of zones.MEKNOT COMPATIBLELength : 140 mmOther lenght: contact usInjection: Flat squirt tubeKOK-20-30-140Length : 280 mmOther lenght: contact usInjection: Flat squirt tubeACCESSORY DESIGNATION REFERENCERelease agent rotating brushdelivered with a set of 2 mopping pad ** see chapter « CONSUMABLES » Page 47KOK-20-31-280TECHNICAL DATARelease agent rotating brushClipping brush on the different extension and elbows.Adapted for release agent application on big size tools. Homogeneous and smooth application of the release agent layer.Different width to be adapted to all kind of areas.MEKNOT COMPATIBLE

CLIPPING ACCESSORIES03Width: 240 mmInjection: Flat squirt tubeBrush: Hair or stripUPON COMMAND ADD AT THE END OF THE REFERENCE: / HAIR or / STRIPACCESSORY DESIGNATION REFERENCEComplete squeegee brushdelivered with hair or strip** see chapter « CONSUMABLES » Page 47KOK-20-18TECHNICAL DATASqueegee brushClipping brush on the ergonomic, the different exten-sion and elbows. More adapted for the big flat areas.It permits the injection of cleaning and removal of grease marks liquid.Dim: 100 x 100 x 100 mmInjection: Filled cone tubeBrush: HairACCESSORY DESIGNATION REFERENCEComplete triangle brushdelivered with hair** see chapter « CONSUMABLES » Page 47KOK-20-11TECHNICAL DATATriangle brushClipping brush on the ergonomic handle, the different extension and elbow. More adapted for hard-to-reach areas.It permits the injection and suction of cleaning and removal of grease marks liquid.Brush Page - 37

CLIPPING ACCESSORIES03Brush Page - 38Dim: 90 x 40 mmInjection: Flat squirt tubeBrush: HairACCESSORY DESIGNATION REFERENCEComplete oblong brushdelivered with hair** see chapter « CONSUMABLES » Page 47KOK-20-19TECHNICAL DATAOblong brushClipping brush on the ergonomic handle, the different extension and elbow.More adapted for hard-to-reach areas.It permits the injection and suction of cleaning and removal of grease marks liquid. Also adapted for the application of unmolding.

CLIPPING ACCESSORIES03Brush Page - 39INTENTIONALLY LEFT BLANK

CLIPPING ACCESSORIES03Hubs Page - 40Compatible with brush holders:Ø40 mmØ60 mmØ80 mmInjection: Filled cone tubeACCESSORY DESIGNATION REFERENCETube hub KOK-20-1TECHNICAL DATATube hubClipping brush on the ergonomic handle, the different extension and elbow.Made as a support for different brush’s noseØ40, Ø60, Ø80.It permits the injection and suction of cleaning and removal of grease marks liquid.Length: 180 mmInjection: LiquidACCESSORY DESIGNATION REFERENCEThin hub KOK-20-8TECHNICAL DATAThin hubClipping brush on the ergonomic handle, the different extension and elbow.Made for hard-to-reach areas.It permits the injection and suction of cleaning and removal of grease marks liquid.

CLIPPING ACCESSORIES03Boring diameter: Starting from Ø 6,5 mmInjection: Liquid under pressureACCESSORY DESIGNATION REFERENCEBoring cleaning hub KOK-20-20TECHNICAL DATABoring Cleaning hubClipping hub on the ergonomic handle and the elbows. Permits the liquid under pressure injection and the suction for boring cleaning and removal of grease marks.Hubs Page - 41

CLIPPING ACCESSORIES03Elbows Page - 42Angle: 30°ACCESSORY DESIGNATION REFERENCE30° Elbow KOK-20-7TECHNICAL DATAElbows at 30° / 45° / 90°Clipping hub on the ergonomic handle and the different extension.Permit clipping the different accessories to be adap-ted at all the situations.Angle: 45°45° Elbow KOK-20-14Angle: 90°90° Elbow KOK-20-15

CLIPPING ACCESSORIES03Telescopic extension Page - 43Length folded/unfolded :0.5m / 1mOther length: contact usACCESSORY DESIGNATION REFERENCETelescopic extension KOK-20-3-0.5/1TECHNICAL DATATelescopic extensionClipping hub on the ergonomic handle and the different elbows.Permit clipping the different accessories to be adapted at all the situations.KOK-20-3-0.75/1.5KOK-20-3-1/2Length folded/unfolded :0.75m / 1.5mOther length: contact usLength folded/unfolded :1m / 2mOther length: contact usCOMBINATION EXAMPLE

CLIPPING ACCESSORIES03Flexible extension Page - 44Length : 800 mmExtension diameter : Ø 30 mmACCESSORY DESIGNATION REFERENCEFlexible extension KOK-20-4TECHNICAL DATAFlexible extensionClipping hub on the ergonomic handle and the different elbows.Permit clipping the different accessories to be adapted at all the situations.COMBINATION EXAMPLE

CLIPPING ACCESSORIES03Page - 45INTENTIONALLY LEFT BLANK

Consumables Page - 46

Consumables Page - 47KKROTATING ACCESSORIES MACHINE 105A MK4CLIPPING ACCESSORIESCONSUMABLESFILTERSSERVICES010203040506

ACCESSOIRES CLIPSABLESCONSUMABLES04Brush’s nose Page - 48Compatible with brush : Ø40 mmACCESSORY DESIGNATION REFERENCEBrush’s nose KOK-1-40TECHNICAL DATABrush’s noseTheir utility is to receive brushes of Ø40, Ø60 and Ø80. They resist to the major part of the solvent that are on the market.Its conception insure an optimal suction efficiency. Its substance protect the treated parts from collision during the cleaning phase.Ø60Brush’s nose KOK-1-60Ø80Brush’s nose KOK-1-80ø 48ø 8080ø 48110ø 40ø 48ø 60110Short brush’s nose for rotating brushKOK-1-40-CShort brush’s nose for rotating brushKOK-1-60-CShort brush’s nose for rotating brushKOK-1-80-CCompatible with brush :Ø60 mmCompatible with brush :Ø80 mmØ40

CONSUMABLES04Brush Page - 49Brush: Ø40 mmLength of standard fiber L: 40mmOther length: contact usØ40ACCESSORY DESIGNATION REFERENCEBrushKOK-2-40-40TECHNICAL DATABrushSpecifically made to resist to the major part of solvent on the market.These draft brush will permit you to take off the toughest dirt. Examples : Grease, water-repellent, Mastics (PR), protecting treatment, etc... Expected to take strong effect, its straighter fiber give an excep-tional lifespan.Ø60BrushØ80BrushØ80L**Ø60L**L**Ø40Brush: Ø40 mmLength of standard fiber L: 50mmOther length: contact usBrush: Ø40 mmLength of standard fiber L: 60mmOther length: contact usKOK-2-40-50KOK-2-40-60Brush: Ø60 mmLength of standard fiber L: 40mmOther length: contact usKOK-2-60-40Brush: Ø60 mmLength of standard fiber L: 50mmOther length: contact usKOK-2-60-50Brush: Ø80 mmLength of standard fiber L: 40mmOther length: contact usKOK-2-80-40Brush: Ø80 mmLength of standard fiber L: 50mmOther length: contact usKOK-2-80-50

ACCESSOIRES CLIPSABLESCONSUMABLES04Finishing brush Page - 50Brush: Ø40 mmLength of fiber L: 40mmOther length: contact usØ40ACCESSORY DESIGNATION REFERENCEFinishing brushKOK-2-40-F-40TECHNICAL DATAFinishing brushSpecifically made to resist to the major part of the solvent on the market. This finishing brush will permit you to take off the less stubborn dirt.Examples : Footprint, Grease, Water-repellent, etc...Less resistant than standard brush but they will be more efficient regarding the removal of grease marks.Ø60Finishing brushØ80Finishing brushØ80L**Ø60L**L**Ø40Brush: Ø40 mmLength of fiber L: 50mmOther length: contact usKOK-2-40-F-50Brush: Ø60 mmLength of fiber L: 40mmOther length: contact usKOK-2-60-F-40Brush: Ø60 mmLength of fiber L: 50mmOther length: contact usKOK-2-60-F-50Brush: Ø80 mmLength of fiber L: 40mmOther length: contact usKOK-2-80-F-40Brush: Ø80 mmLength of fiber L: 50mmOther length: contact usKOK-2-80-F-50

CONSUMABLES04Stripping brush Page - 51Ø40ACCESSORY DESIGNATION REFERENCEStripping brushTECHNICAL DATAStripping brushSpecifically made to resist to the major part of the solvent on the market. This brush will permit you to take off the most stubborn dirt, to strip without scrat-ching.Tougher than the other brushes, it will be more efficient on big stripping works.Ø60Stripping brushØ80Stripping brushØ80L**Ø60L**L**Ø40Brush: Ø40 mmLength of standard fiber L: 20mmOther length: contact usKOK-2-40-D-20Brush: Ø40 mmLength of standard fiber L: 30mmOther length: contact usBrush: Ø40 mmLength of standard fiber L: 40mmOther length: contact usKOK-2-40-D-30KOK-2-40-D-40Brush: Ø60 mmLength of standard fiber L: 20mmOther length: contact usKOK-2-60-D-20Brush: Ø60 mmLength of standard fiber L: 30mmOther length: contact usBrush: Ø60 mmLength of standard fiber L: 40mmOther length: contact usKOK-2-60-D-30KOK-2-60-D-40Brush: Ø80 mmLength of standard fiber L: 20mmOther length: contact usKOK-2-80-D-20Brush: Ø80 mmLength of standard fiber L: 30mmOther length: contact usBrush: Ø80 mmLength of standard fiber L: 40mmOther length: contact usKOK-2-80-D-30KOK-2-80-D-40

ACCESSOIRES CLIPSABLESCONSUMABLES04Brush Page - 52Width: 240 mmBrush: HairACCESSORY DESIGNATION REFERENCEHair squeegee brush KOK-20-18-2TECHNICAL DATASqueegee brushClipping brush on the ergonomic, the different exten-sion and elbows.More adapted for the big flat areas.It permits the injection of cleaning and removal of grease marks liquid.Width: 240 mmBrush: Rubber stripStrip squeegee brush KOK-20-18-315 mm15 mm

CONSUMABLES04Width: 100 x 100 x 100 mmBrush: HairACCESSORY DESIGNATION REFERENCEHair triangle brush KOK-20-11-2TECHNICAL DATATriangle brushClipping brush on the ergonomic handle, the different extension and elbow.More adapted for hard-to-reach areas. It permits the injection and suction of cleaning and removal of grease marks liquid.15 mmWidth: 90 x 40 mmBrush: PoilsACCESSORY DESIGNATION REFERENCEHair oblong brush KOK-20-19-2TECHNICAL DATAOblong brushClipping brush on the ergonomic handle, the different extension and elbow.More adapted for hard-to-reach areas.It permits the injection and suction of cleaning and removal of grease marks liquid. Also adapted for the application of unmolding.15 mmBrush Page - 53

CONSUMABLES04Mopping pad Page - 54Standard length: 140 mm* Other length : contact usRuler: Micro fiber spongeAdapt the length regarding to your body of unmolding brush.ACCESSORY DESIGNATION REFERENCEKOK-20-30-2-140TECHNICAL DATAMopping padSpecifically made for the release agent application. These micro fiber pad will permit you to apply the release agent on all kind of areas. The micro fiber will conserve those areas clean and scratch free.These pad make the release agent application more efficient. The applied layer is homogenous and without microbubbles.Mopping pad** set of 2 mopping padStandard length: 280 mm* Other length : contact usRuler: Micro fiber spongeAdapt the length regarding to your body of unmolding brush.KOK-20-30-2-280Mopping pad** set of 2 mopping pad

CONSUMABLES04Pad Page - 55Diameter: Ø30 mmHardness: MediumFixing consumable: VelcroACCESSORY DESIGNATION REFERENCESanding machine Pad Ø30RolocKOK-20-6-30-RTECHNICAL DATAPadSpecifically made to resist to the major part of the solvent on the market. These sanding pads can be used with different consumables : sandpaper scotch brite, cleaning disk,...The different diameters and the hardness of the pads favor the work in hard to reach areas.Diameter: Ø30 mmHardness: MediumFixing consumable: VelcroSanding machine Pad Ø30MetricKOK-20-6-30-MDiameter: Ø50 mmHardness: MediumFixing consumable: VelcroThread: Right-hand threadSanding machine Pad Ø50 KOK-20-6-50Diameter: Ø80 mmHardness: MediumFixing consumable: VelcroThread: Right-hand threadSanding machine Pad Ø80 KOK-20-6-80Ø30Ø30Ø50Ø80

ACCESSOIRES CLIPSABLESCONSUMABLES04Paper disk Page - 56Paper: Ø30 mmStandard grain: P80 / P120 / P150 / P240Other grain: Contact usUPON COMMANDAdd at the end of the reference:(Ex: KOK-3-30-P80)ACCESSORY DESIGNATION REFERENCEPaper disk Ø30Batch of 20 diskKOK-3-30-...TECHNICAL DATAPaper diskThis disk is made for the most challenging sanding operation. Provided with an optimized meshed struc-ture and ceramic grains, it offers high quality perfor-mance.Used with the sanding machine KLEANVAK, sanding is efficient and without dirt.Paper: Ø50 mmStandard grain: P80 / P120 / P150 / P240Other grain: Contact usUPON COMMANDAdd at the end of the reference:(Ex: KOK-3-50-P80)Paper disk Ø50Batch of 20 diskKOK-3-50-...Paper: Ø80 mmStandard grain: P80 / P120 / P150 / P240Other grain: Contact usUPON COMMANDAdd at the end of the reference:(Ex: KOK-3-80-P80)Paper disk Ø80Batch of 20 diskKOK-3-80-...

CONSUMABLES04Scotch brite disk Page - 57Diameter: Ø30 mmSpecificities: Composed of aluminum oxide abrasives, for cleaning and finishing.UPON COMMANDAdd at the end of the reference:(Ex : KOK-4-30-7447)ACCESSORY DESIGNATION REFERENCEScotch brite Ø30Batch of 20 diskKOK-4-30-...Hardness : Ultra light: 7445Ultra fine: 7448Fine: 6448Medium: 7447Medium hard: 8447Strong: 7446TECHNICAL DATAScotch brite diskSpecifically made for a not much aggressive sanding, fits perfectly for finishing. The obtai-ned abrasion by this disk is mastered and permits an accurate work without spoiling the shape of the worked part.Proposed in different diameter to be adapted at the size of the areas that need to be treated.Diameter: Ø50 mmSpecificities: Composed of aluminum oxide abrasives, for cleaning and finishing.UPON COMMANDAdd at the end of the reference:(Ex : KOK-4-50-7447)Scotch brite Ø50Batch of 20 diskKOK-4-50-...Hardness : Ultra light: 7445Ultra fine: 7448Fine: 6448Medium: 7447Medium hard: 8447Strong: 7446Diameter: Ø80 mmSpecificities: Composed of aluminum oxide abrasives, for cleaning and finishing.UPON COMMANDAdd at the end of the reference:(Ex : KOK-4-80-7447)Scotch brite Ø80Batch of 20 diskKOK-4-80-...Hardness : Ultra light: 7445Ultra fine: 7448Fine: 6448Medium: 7447Medium hard: 8447Strong: 7446

ACCESSOIRES CLIPSABLESCONSUMABLES04Cleaning disk Page - 58Disk: Ø30 mmMatter: FeutreACCESSORY DESIGNATION REFERENCECleaning disk Ø30Batch of 20 diskKOK-5-30TECHNICAL DATACleaning diskSpecifically made for composites materials cleaning operation after sanding. This wool disk permits a deep cleaning with incredible results.Disk: Ø50 mmMatter: FeutreCleaning disk Ø50Batch of 20 diskKOK-5-50Disk: Ø80 mmMatter: FeutreCleaning disk Ø80Batch of 20 diskKOK-5-80

CONSUMABLES04Filter bag Page - 59Filter: HEPA filter bagSpecificities: Batch of 4 filter bagsACCESSORY DESIGNATION REFERENCEFilter bag FHP -20Batch of 4FHP-20-4TECHNICAL DATAFilter bag FHP - 20This filter bag collects 99.99% of the hexavalent chrome dust (or chrome VI) from sanding or strip-ping of the treated parts.Used with our 105A machine, and in combination with the FHA-10 filter, work in co-activity during a cleaning / sanding / stripping phase is now possible.KKKK

Filters Page - 60

Filters Page - 61KKROTATING ACCESSORIESMACHINE 105A MK4CLIPPING ACCESSORIESCONSUMABLESFILTERSSERVICES010203040506

FCA - 100 Filter Page - 62Filter : FCA - 100Packaging : Pallet of 36 filterslength: 1300, width: 1000, height: 800Mass : 365 kgACCESSORY DESIGNATION REFERENCEFCA - 100 FiltersPallet of 36FCA-100-36TECHNICAL DATAFCA - 100 FilterThis highly efficient filter purifies the air full of harmful vapors that go through it by catching 100% of COV (Composé Organique Volatil). It gives back a pure air in the using area.The co active work during a cleaning phase by using highly solvent product and finish possible.1000mm800mm1300mm365kgFILTERS05Made in natural fibers, the KleanVak® Kraft paper tube is a natural product. 100% Ecological100% RecyclableMETHYL ETHYL CETONEDIESTONE DLSDIESTONE 8284TECHNICLEAN OX1CARECLEAN AS1* Other liquid, contact us.DEPARTUREFREKOTE 700 NCFREKOTE 44 NCFREKOTE B15

FILTERS05Filter : HEPA FilterPackaging: Batch of 5 filtersACCESSORY DESIGNATION REFERENCEFHA - 10 FilterBatch of 5 filtersFHA - 10 - 5TECHNICAL DATAFHA - 10 FilterThis filter HEPA catches 100% of hexavalent chromes’ dirt (or chrome VI) that come from the sanding or stripping of the treated parts.Used with our 105A machine and in combina- tion with the FHP-20 filter bag, co-activity work during a cleaning / sanding / stripping phase is now possible.FHA - 10 Filter Page - 63

Services Page - 64

Services Page - 65KKROTATING ACCESSORIESMACHINE 105A MK4CLIPPING ACCESSORIESCONSUMABLESFILTERSSERVICES010203040506

Services Page - 66KLEANVAK AT YOUR DISPOSAL...Kleanvak brings you all the services needed to at best enjoy your equipment and pursue your objectives. Since the delivery to the maintenance, Kleanvak proposes you the most adapted service.

KLEANVAKMAINTENANCEMaintenanceFormulas adapted to your needs. The range goes from the simple periodic inspection to the com-plete maintenance of your mean.KLEANVAKSPARE PARTSOriginal spare partsKeep the value of your equipment unspoiled and insure their availability with our original spare parts, KLEANVAK quality.ServicesAn optimal reactivity for a maximal availability.Services Page - 67

SERVICES06KLEANVAK MAINTENANCE :...TO SATISFY YOUR NEEDS.To guarantee you working machine whenever you need, we prose formula adapted to your choice.Optimized solution thanks to our skills and knowledge of application.We offer you different formula corresponding to your demand.+INSPECTIONPREVENTIVEMAINTENANCEPREVENTIVEFORMULAEach formula is customizable regarding to your needs.Every services is made by KLEANVAK qualified employee.+INSPECTIONCURATIVEMAINTENANCECURATIVEFORMULAKleanvak «preventivemaintenance»Kleanvak «curativemaintenance»The formula «preventive mainte-nance» include the key-points analy-sis to insure the proper functioning of the equipment et the preventive repla-cement of parts with an defined wearas part of a preventive maintenance. This formula guarantees you a machine ready to be used permanently.The formula «curative maintenance» covers the replacement of damaged parts and analysis of key points for the proper func-tioning of the machine. Usually with average use, annual maintenance is sufficient. However, if the 500 hours of use are reached before the 12 months, it will be necessary to carry out maintenance.Maintenance Page - 68

SERVICES06Spare parts Page - 69KLEANVAK ORIGINAL SPARE PARTS :...KEEP THE EFFICIENCY OF YOUR MACHINE SAFEYou are not choosing our machines KLEANVAK by accident : innovative technology, performance, reliability, robustness, profitability et ecologi-cal viability. In order to keep all the performances safe, the choice of ori-ginal replacement part by KLEANVAK is required.KLEANVAK qualityAll our parts have been made to last long. The KLEANVAK’s spare parts submitted a strict control. Thus, we propose to you what is for your KLEANVAK’s machine. Choo-sing KLEANVAK spare parts is opting for the guarantee that your machine will remain efficient for a long time, without nasty surprise. KLEANVAK availabilityWe are storing all our spare parts. So, the one you miss is always available at our place. The logistics’ arrange-ment, permits us to insure you a deli-very as soon as possible.06.88.65.01.57Call the :From Monday to Fridayfrom 8:00 a.m. to 12:00 p.m.from 2:00 p.m. to 5:00 p.m.

Contact us Technopole Izarbel104 Allée Antoine d’Abbadie64210 BIDARTFrance +33 (0)5 59 43 52 10 info@kleanvak.com www.kleanvak.comTHEY TRUST US...