DI-NOC Tech Data Sheet : simplebooklet.com

3M™ DI-NOC™ Architectural FinishesPWF-500Doc Type Product # (opt.)3M™ DI-NOC™ Architectural FinishesTechnical Data SheetProduct Description3M™ DI-NOC™ Architectural Finishes are decorative surface finishes for interior applications, available in over 1000 designs. 3M™ DI-NOC™ designs offer the warmth of wood grain, sleek feel of metal, cool essence of natural stone, pure color, and hundreds of other designs. The MT Matte Series has a new state-of-the-art matte surface, offering realistic texture and appearance of natural materials and rich, solid colors.IMPORTANT NOTEiPlease refer to the 3M™ DI-NOC™ Installation Guide for additional information.Featured Benefits of DI-NOC Architectural Finishes Figure 1: 3M™ Comply™ Air-Release Channels Figure 2: New Controlled Reflection TechnologyCharacteristicValueMaterialFilmVinyl (most finishes)Adhesive Pressure-sensitive acrylic, permanentRelease LinerSilicone-coated poly paperThickness Film + Adhesive8 mils (200 microns) nominal, not including release liner Some designs vary slightly in thickness due to embossingRelease Liner6.2 mils (157 microns)Maximum Roll SizeStandard DI-NOC 48 in. X 164 ft. (1,220mm x 50m)WG-GN, VM, ET 48 in. x 82 ft. (1,220mm x 25m)Maximum Weight 55 lb. (25 kg) (approx.) for a 164 ft. (50m) rollwarranted.The values in these tables are typical and are based on test data deemed reliable but are notProduct Characteristics• Interior Applications — Ideal for walls, columns, doors, cabinets, and more.• Application Surfaces — Use on metal, wood, glass and complex curved (3D) surfaces.• Aesthetics — New Controlled Reflection Technology gives Premium Wood Series therealistic appearance and texture of natural wood. The controlled reflection of the mattecoating technology is combined with both fine and deep wood grain texture and high-quality printing (see Figure 2).”• Remodel and Reuse — Shortens refurbishment downtime and brings entirely new designsto existing assets.• Easy Application — 3M™ Comply™ Adhesive technology virtually eliminates bubbles,simplifying and speeding application (see Figure 1).• Expected Performance Life is 12 years for indoor, vertical applications (see Warranty).Revision Q, March 2022

Page 2

2 3M™ DI-NOC™ Architectural FinishesProduct PerformanceThe values in these tables are typical and are based on test data deemed reliable but are not warranted.* Product applied to an aluminum plateCharacteristicEvaluation ResultsDimensional Stability*4 in. x 4 in. (100mm x 100mm) crosscut in film, after 2 days at room temperature.Largest gap: < 0.01 in. (0.3mm)Heat Resistance*Aged at 150°F (65°C) for 28 days No delamination or visible change.Thermal Cycle Resistance*Cycled between -22°F and 150°F (-30°C and 65°C) for 12 days.No delamination or visible changeMoisture Resistance* No delamination or visible changeAged at 104°F (40°C), 95% humidity for 30 days.Cold Impact Resistance*2 lb. (907g) weight dropped from 5 in. (12.7cm) height, at 32°F (0°C) using a Gardner Impact Tester.No cracks in filmUltraviolet Light ExposureExposed to carbon arc accelerated UV light for 250 hoursNo visible changeWear ResistanceTaber® CS-17 Abrasion wheel: 1 Kg loading weight, 7,000 cyclesNo wear-through of surface finishFire ResistanceWhen used in Interior Applications as defined by NFPA 101 “Life Safety Code”, Test Method ASTM E84Most Products have Class AIndustry-Specific TestingIMO Certification/USCG Type Approval, Intertek Firedoor, and CAN/ULC-S102.2Consult 3M Technical ServiceVOC Emission TestingCA Specification 01350 tested per CDPH Standard Method V1.1 and V1.2Compliant as low-emitting 3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022

Page 3

Page 4

4 3M™ DI-NOC™ Architectural FinishesProduct Performance (continued)Resistance to SolventsFilm was applied to an aluminum plate, left for 24 or 72 hours, then immersed in the following chemicals:Resistance to Cleaners & DisinfectantsFilm was applied to an aluminum plate, left for 72 hours, then immersed in the following chemicals. For immersion testing, the sample is immersed in the cleaner or disinfectant for up to 72 hours, then rinsed with water and allowed to dry. For wipe testing, the cleaner or disinfectant is applied to the sample to simulate routine use in a healthcare setting, and then wiped off with a cloth, and repeated. Any change in the surface of the film is noted. Other cleaners and disinfectants with the same active ingredient are expected to perform similarly.ClassificationSolventImmersion TimeImmersion Testing ResultWater No visible change24 hoursWaterAcidNo visible change24 hoursHydrochloric Acid (10%)No visible change72 hoursHydrogen PeroxideBase (Alkali) No visible change24 hoursSodium HydroxideAlcoholNo visible change24 hoursEthanolNo visible change72 hoursIsopropyl AlcoholEster D5 minutesEthyl Acetate eterioration observedKetoneDeterioration observed72 hoursAcetone5 minuMethyl Ethyl Ketone Deterioration observedtesAromatic Deterioration observed5 minutesToluene3M Cleaners and Disinfectants Tested on Standard DI-NOCWipe Testing ResultImmersion TimeImmersion Testing Result3M Disinfectants currently listed by the EPA as effective against SARS-CoV-2 (COVID-19) 3M™ C. diff Solution Tablets ConcentrateNo visible change72 hoursNo visible change 3M™ HB Quat Disinfectant CleanerConcentrate #25No visible change72 hoursNo visible change 3M™ MBS Disinfectant CleanerConcentrate #42No visible change 72 hours No visible change3M™ MBS Disinfectant Cleaner Fresh Scent Concentrate #41No visible change 72 hours No visible change3M™ Neutral Quat Disinfectant Cleaner Concentrate #23No visible change72 hours No visible change3M™ Non-Acid Disinfectant Bathroom Cleaner Concentrate #15No visible change72 hoursNo visible change3M™ Quat Disinfectant CleanerConcentrate #5No visible change72 hours No visible change3M™ RTC Disinfectant CleanerConcentrate #40No visible change72 hours No visible change3M™ TB Quat Disinfactant Cleaner Ready-To-UseNo visible change72 hours No visible changeOther 3M™ Cleaners &Disinfectants3M™ Acid Bowl Cleaner RTUNo visible change72 hoursNo visible change3M™ Bathroom Cleaner Concentrate #44No visible change72 hoursNo visible change3M™ Bathroom Disinfectant CleanerConcentrate #4No visible change72 hoursNo visible change3M™ Bathroom and Shower CleanerConcentrate #51No visible change 72 hours No visible change3M™ Crème Cleanser Ready to UseNo visible change72 hoursNo visible change 3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022

Page 5

53M™ DI-NOC™ Architectural FinishesOther 3M™ Cleaners &Disinfectants3M™ Deodorizer- Country Day Scent Concentrate #12No visible change72 hoursNo visible change3M™ Deodorizer- Fresh Scent-Concentrate #13No visible change72 hoursNo visible change3M™ Deodorizer- Mountain Spice-Concentrate #14No visible change 72 hours No visible change3M™ Enzyme Digester Ready to UseNo visible change72 hoursNo visible change3M™ 3-in-1 Floor Cleaner Concentrate #24No visible change72 hoursNo visible change3M™ Floor Stripper LO Concentrate #22 No visible change 72 hours No visible change3M™ Food Service Degreaser Concentrate #7No visible change72 hoursNo visible change3M™ General Purpose Cleaner Concentrate #8No visible change72 hoursNo visible change3M™ Glass Cleaner Concentrate #1 No visible change 72 hours No visible change3M™ Glass Cleaner and Protector Concentrate #17No visible change72 hoursNo visible change3M™ Gum Remover Ready to UseNo visible change72 hoursNo visible change3M™ Heavy Duty Degreaser Gallon: ConcentrateNo visible change72 hoursNo visible change3M™ Heavy Duty Glass Cleaner Concentrate #20No visible change 72 hours No visible change3M™ Heavy Duty Multi-Surface Cleaner Concentrate #2No visible change72 hoursNo visible change3M™ Industrial Degreaser Concentrate #26No visible change72 hoursNo visible change3M™ Liquid Stainless Steel Cleaner and Polish Ready to UseNo visible change72 hoursNo visible change3M™ Neutral Cleaner Concentrate #33No visible change72 hoursNo visible change3M™ Neutral Cleaner LO Concentrate #3No visible change72 hoursNo visible change3M™ Non-Acid Bathroom Cleaner Concentrate #15No visible change72 hoursNo visible change3M™ Peroxide Cleaner Concentrate #34No visible change72 hoursNo visible changeScotchgard™ Bonnet Cleaner Concentrate #11No visible change72 hoursNo visible changeScotchgard™ Extraction Cleaner Concentrate #27No visible change 72 hours No visible changeScotchgard™ Pretreatment Cleaner Concentrate #28No visible change 72 hours No visible change3M™ Sanitizer Concentrate #16No visible change72 hoursNo visible change3M™ Sharpshooter™ No visible change 72 hours No visible change3M™ Speed Stripper Concentrate #6 No visible change 72 hours No visible change3M™ Stainless Steel Cleaner and Protector Ready to UseNo visible change72 hoursNo visible change3M™ Tile, Grout, & Bowl Cleaner Concentrate #52No visible change72 hoursNo visible change3M™ Troubleshooter™ Finish Remover ConcentrateNo visible change 72 hours No visible change3M™ Troubleshooter™ Liquid Finish Remover Ready to Use #21No visible change 72 hours No visible change3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022

Page 6

6 3M™ DI-NOC™ Architectural FinishesCleaners & Disinfectants Tested on Standard DI-NOC Immersion Time Immersion ResultOther Cleaners & DisinfectantsNo visible change72 hoursAccel® TB Disinfecting wipesNo visible change72 hoursAsepticare™ TB+IINo visible change72 hoursBirex® DisinfectantNo visible change72 hoursBleach-Rite® DisinfectantNo visible change72 hoursCaltech Precise® hospital cleanerNo visible change72 hours2 in 1 Carbona® cleanerNo visible change72 hoursCaviWipes™No visible change72 hoursCidex® OPANo visible change72 hoursCitrace® GermicideCitrace® II hospital germicidal deodoriz No visible change72 hoursing cleanerNo visible change72 hoursClorox® Bleach - 50% bleach/50% waterClorox® Broad Spectrum Quaternary Di No visible change72 hourssinfectantClorox® germicidal bleach spray with No visible change72 hoursbleachDiscide® Ultra disinfectant No visible change72 hourssprayNo visible change72 hoursEcolab® TB disinfectant cleanerEnvirocide® Disinfectant decontaminat No visible change72 hoursing cleanerNo visible change72 hoursFade-A-Dyne® blood removerNo visible change72 hoursFantastik® Spray CleanerNo visible change72 hoursFormula 409®No visible change72 hoursGuardsman® AFTAHarvard Chemical 625® hospital grade neutr No visible change72 hoursal disinfectantNo visible change72 hoursHealthlink Citriguard® II Hard Surface CleanerNo visible change72 hoursHusky® 891No visible change72 hoursIvory® UltraNo visible change72 hoursK2R®No visible change72 hoursLysol® Disinfectant SprayNo visible change72 hoursMicroquant® Quanternary detergent disinfectant - EcolabNo visible change72 hoursMisty disinfectant & deodorantNo visible change72 hoursOxivir® TB - DiverseyNo visible change72 hoursOxivir® TB ready to use wipes - DiverseyNo visible change72 hoursOxivir® TB Wipes - DiverseyNo visible change72 hoursQD-64® lemon Disinfectant - QuestNo visible change72 hoursQuest 256® Neutral Disinfectant - ButchersNo visible change72 hoursResolve® Spot & Stain cleaner 3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022

Page 7

73M™ DI-NOC™ Architectural FinishesProduct UseThe user is solely responsible for evaluating and determining whether these 3M Products are suitable and appropriate for any particular use or manufacturing process in which they may be used.Consider These Factors in Determining the Suitability of the ProductBe sure you understand the unique characteristics of these Products and consider them in determining whether the Product is suitable for your use. Please refer to the 3M™ DI-NOC™ Installation Guide for additional information.1. Substrate texture affects Product adhesion and application ease. Unless the substrate is very smooth, its texture may be visible through the Product. Compounds used to smooth a textured substrate permanently change that substrate. Product removal may damage the substrate or its finish.2. Application surface conditions affect Product adhesion. Ensure that the existing paint, surface finish, or wall covering has excellent bond to the substrate area wherethe Product will be applied. Repair, prime and paint the substrate, as needed. An adhesion promoter may be required to increase Product adhesion.3. Human and environmental conditions Temperature and humidity in recommended range Direct UV light (sunlight) Heating or cooling ducts in close proximity. Unsealed substrates in front of water sources. People or equipment that will be in contact with the Product.4. The Product may contain a splice. The location of the splices is marked with a tab along the edge of the Product. The installer will needto determine the impact of the splice and work around it to make the best use of the material layout.Factors That Affect Performance LifeThe actual performance life of the Product is affected by:- selection, condition and preparation of the application surface.- application surface texture.- application technique.- angle and direction of sun exposure.- environmental conditions.- cleaning or maintenance methods.Other Cleaners & DisinfectantsNo visible change72 hoursSaniZide Plus® germicidal solutionNo visible change72 hoursSaniZide Plus® germicidal wipesNo visible change72 hoursSimply Green®No visible change72 hoursSpartan® Clean by Peroxy®Spartan® Green Solutions® Neutral Disinf No visible change72 hoursectant cleanerNo visible change72 hoursSpray Nine®No visible change72 hoursTechniSat® TX1067 (70/30 IPA)No visible change72 hoursTide™ Powder DetergentNo visible change72 hoursVirex® 256 cleanerNo visible change72 hoursVirox®3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022

Page 8

8 3M™ DI-NOC™ Architectural FinishesHorizontal Print Series3M™ DI-NOC™ Architectural Finishes Fine Wood (FW) and Wood Grain (WG) Series include horizontal pattern options, which simplify the use of horizontal wood grains by changing the print direction. A product number ending in “H” indicates horizontal grain direction. The following horizontal patterns have a corresponding vertical match.Horizontal VerticalFW-606H FW-1134FW-607H FW-1133FW-608H FW-1123FW-609H FW-1113FW-1039H FW-1124FW-1040H FW-1137FW-1121H FW-1022FW-1130H FW-1129FW-1136H FW-1135FW-1139H FW-1138FW-1145H FW-1143WG-1392H WG-2705Afﬁxing a horizontal pattern ﬁlm on a doorNormal wood grain patterns:afﬁx twice for one door.Horizontal print series wood grain patterns:complete by afﬁxing once.2000 mm1000 mmSeamless2000 mm1000 mmWith SeamsPrinting direction = Direction of the wood grain lengthVertical Print SeriesWood grain patterns of vertical print series:horizontal to the lengthHorizontal Print SeriesWood grain patterns of horizontal print series:vertical to the length3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022

Page 9

93M™ DI-NOC™ Architectural FinishesConsiderations for Design Selection by Product SeriesUse the following table to ensure the selected design can be successfully applied. See the 3M™ DI-NOC™ Installation Guide for additional information.1 - Texture of Application Surface: Application surface texture may be visible through the film. Apply film to very smooth and clean application surfaces.2 - Damage to Film Surface: Surface of film may be damaged during application. Apply film with a squeegee wrapped in a new soft cloth, or covered in 3M™ PTFE Film Tape 5480. Not recommended for high traffic areas.3 - Printed/Embossed Pattern Match at Double-cut Seams: Printed and embossed pattern pitches may appear random or not aligned at seams. Prior to application, confirm that appearance at seams is acceptable, or avoid double-cut seam applications and consider using reveals or joint separations.4 - Reflection of Pattern at Double-cut Seams: Reflected color differences may be visible at seams due to the directional light reflection from the embossed surface of the film. Prior to application, confirm that appearance at seams is acceptable, or avoid double-cut seam applications and consider using reveals or joint separations. If double-cut seams are used, apply each panel in the same direction.5 - Lighting Environment After Application: Small scratches and unevenness may be visible on the surface due to the light illumination of the film, such as under down lighting or spotlights.6 - Not recommended for use on 3D compound curved surfaces: Film may distort or not conform around compound curves. Product SeriesTexture of Application Surface1Damage to Film Surface2Printed/Embossed Pattern Match at Double-cut Seams3 Reflection of Pattern at Double-cut Seams4Lighting Environment After Application5Not Recommended On Compound Curved Surfaces6Notes• Handle with care during Install- ation to prevent damage toproduct. Carefully makedouble-cut seams with a sharpblade because the seam may bemore noticeable for dark colors.AE Mortar/IndustrialAM Advanced Metallic•Do not use on compoundcurved surfaces.• Film may bubble if applied toplastic substrates that outgas.• Do not crease or dent the filmduring application.• Do not attempt to repositionthe film during application,which can cause the film toseparate from the adhesive.BW Entertainment•Do not crease or dent the filmduring application.• Not recommended for com-pound curved surfaces due todistortion of textured surface.CA Carbon•Do not crease or dent the filmduring application.CHMetallic HairlineCN ConcreteET EffectFA Multiple Series•Only for FA-592, FA-1094, FA-1156, FA-1161, FA-1163, FA-1164, FA-1166, FA-1167, FA-1530, FA-1531FE Metal Leaf/Textile FE-1733•Not recommended for com-pound curved surfaces due todistortion of textured surface.FW Fine WoodFW-791, etc.•Some patterns are large scale,and may not match at seams;view full pattern width image at 3m.com/AMD.PW Premium Wood Series• Handle with care duringinstallation to prevent damageto product.Multiple SeriesMT & DW Matte 3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022

Page 10

10 3M™ DI-NOC™ Architectural FinishesFW-H Fine Wood WG-H Wood Grain Horizontal Patterns See Horizontal Print Series sectionHG High Gloss andWH-111 Whiteboard •Do not use on compoundcurved surfaces.• Film may bubble if applied toplastic substrates that outgas.• Do not crease or dent the filmduring application.• Do not stretch or attempt toreposition the film during appli-cation, which may deform,buckle or ripple the film.•Seams will be visible whenusing a double-cut seam due to glossy film.HS Mono ContrastHS-1657HS-1658•LE LeatherLE-1226, LE-1227, LE-1228, LE-1229, LE-1230, LE-1231LE-1551LE-1552LE-1552LE-1171LE-1171•For LE-1552 only: not recom-mended for compound curved surfaces due to distortion oftextured surface.LW Entertainment• Do not crease or dent the filmduring application.ME, PAMetallicMW Metallic WoodNU Nuno/TextileNU-1795NU-1796NU-1797NU-1604NU-1605•Not recommended for com-pound curved surfaces due todistortion of textured surface.PC SandPS Single ColorPS-1183•For comment 4 only: PS-107,PS-110, PS-140, PS-292, PS-293, PS-294, PS-504, PS-668, PS-885, PS-948, PS-992, PS-1005RS Entertainment• Do not crease or dent the filmduring application.• Not recommended for com-pound curved surfaces due todistortion of textured surface.RT Aged Metal•SE AbstractSI Silk•The texture of this pattern has a grain: apply each sheet in thesame direction and use a dou-ble-cut seam.ST Stone•Only for ST-1195, ST-1586, ST-1587, ST-1588, ST-1831TE Advanced Metallic•Do not crease or dent the filmduring application.Product SeriesTexture of Application Surface1Damage to Film Surface2Printed/Embossed Pattern Match at Double-cut Seams3 Reflection of Pattern at Double-cut Seams4Lighting Environment After Application5Not Recommended On Compound Curved Surfaces6Notes 3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022

Page 11

113M™ DI-NOC™ Architectural FinishesApplication and Removal GuidelinesThe values in these tables are typical, and are based on test data deemed reliable but are not warranted. See the 3M™ DI-NOC™ Installation Guide for additional information.VM Metallic VM-1691and similar•Do not use on compoundcurved surfaces.• Film may bubble if applied toplastic substrates that outgas.• Do not crease or dent the filmduring application.• Do not attempt to repositionthe film during application,which can cause the film toseparate from the adhesive.WG Wood Grain WG-1070WG-1071WG-1812Wiping Wood Grain WG-156WG-157WG-159WG-166•The film surface has a specialtreatment. Do not use double-cut seams. Apply with revealsor joint separations.WG-GN Wood Grain Gloss•Avoid using abrasive clothes and organic solvents to clean.Characteristic ValueApplication Surface Type Smooth, hard, non-porous (sealed) materialApplication Location InteriorApplication Temperature 54°F - 100°F (12°C - 38°C) air and application surfaceApplication Method Dry applicationHigh Humidity EnvironmentsProducts are not recommended for Interior Applica-tions where condensation consistently occurs, or large changes in humidity occur.Product Removal Heat at 176°-212°F (80°-100°C)Product SeriesTexture of Application Surface1Damage to Film Surface2Printed/Embossed Pattern Match at Double-cut Seams3 Reflection of Pattern at Double-cut Seams4Lighting Environment After Application5Not Recommended On Compound Curved Surfaces6Notes3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022

Page 12

123M™ DI-NOC™ Architectural FinishesAdhesion Compatibility with Application SurfacesThe following table contains peel adhesion information for the Product peeled from various surfaces. A number of surfaces have acceptable adhesion without the use of adhesion promoter. Examples of increased adhesion with adhesion promoters on certain surfaces is presented. Surfaces vary widely, so adhesion should be assessed for each customer substrate. Some surfaces are porous and must be sealed before application of 3M™ DI-NOC™ to prevent outgassing of the surface over time.Test specimens were applied to the substrate and conditioned at 68°F (20°C) for 48 hours, then peel tested at 180 degrees at a tensile speed of 12 inches (300 mm) per minute.WP-2000 undiluted for testingAcceptable adhesionFails in adhesion1 Bubbles may appear under film due to outgassing if plastic substrate is not fully cured before application.2 If DI-NOC™ is wrapped and overlapped around edges, use of an adhesion promoter is highly recommended due to additional stress from wrapping DI-NOC™.3 Sealer was wiped with Isopropyl alcohol to improve adhesion. Adhesion was tested using a spring scale per the DI-NOC Installation Guide and passed at 800-1000 g/in.Substrate Application SurfaceAdhesion PromoterNO ADHESION PROMOTERlb./in. (N/25mm)WP-2000 (water-based) lb./in. (N/25mm)3M™ Tape Primer 94 (solvent-based) lb./in. (N/25mm)WoodMDF (w/ sealer) 2 (8)3 11 (51) 4 (18)Painted MDF 7 (31)12 (52)4 (20)BoardsGypsum Board (w/skim coat & sealer)2 (8)38 (35) 4 (19)MetalsAluminum 11 (47)11 (48)11 (47)Anodized Aluminum 11 (49)13 (56)5 (23)Stainless Steel 6 (28)13 (56)6 (26)Glass Glass 6 (26)13 (58)6 (26)Plastics1ABS 10 (44)13 (56)6 (28)Acrylic 10 (43)12 (54)5 (22)Polyester (PETG) 10 (45)11 (51)7 (29)Polypropylene 4 (20)4 (17)1 (2)Polyethylene 1 (3)5 (21)1 (3)Polycarbonate 10 (44)12 (53)6 (28)DI-NOC™ Film 5 (24)211 (49) 9 (42)3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022

Page 13

133M™ DI-NOC™ Architectural FinishesProcessing OptionsProcessing of the Product is on a user test and approve basis only. The user is responsible for results in all processing applications.PrintingThe Products are not designed for surface printing and have various surface textures. Printing is on a user test and approve basis only. No warranty is made for the quality or durability of printed Product.CuttingElectronic cutting, weeding and application tape with the Product must be used only on a user test and approve basis. The user should consider the following: (1) the type of liner used for the Product is not intended for electronic cutting; (2) there is currently no recommended application tape that adheres properly to the face of the Product to hold cut shapes in place.Shelf Life and StorageShelf LifeApply the Product within 2 years of the date of purchase. The storage conditions specified in this document must be maintained for full shelf life.Storage Conditions• 40°F - 90°F (4°C - 32°C)• Away from direct sunlight and high humidity• Clean, dry area• Original container with end caps, in the plastic sleeve, stored horizontally, a maximum of 6 cartons high• Bring the Product to room temperature before application3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022

Page 14

143M™ DI-NOC™ Architectural FinishesCleaning and MaintenanceRegular cleaning will help maintain the appearance of the finish. Use mild detergent and water, and a soft cloth or sponge without abrasives. For difficult stains, spot clean with a diluted Isopropyl Alcohol solution and a soft cloth. Avoid using strong solvents or detergents that are either highly alkaline (pH>11) or acidic (pH<3). Do not use ammonia, chlorine, or strong organicbased cleaning products, polishing or cleaning compound, hard-bristle brushes or electric polishing equipment. Use only clean, nickfree tools and wipe gently. Health and SafetyCAUTION!When handling any chemical products, read the manufacturers' container labels and the Safety Data Sheets (SDS) for importanthealth, safety and environmental information. To obtain SDS sheets for 3M products go to 3M.com/SDS, or by mail or in case of anemergency, call 1-800-364-3577 or 1-651-737-6501.When using any equipment, always follow the manufacturers' instructions for safe operation.WARNING!To reduce the risks of personal injury and/or property damage associated with glass breakage:A glass surface covered by a film with areas of high opacity or dark-colored ink will absorb more heat than other glass surfaceswhen exposed to sunlight. Heat absorption can create thermal expansion that could result in glass breakage or cracking. Do not usea film with areas of high opacity or dark-colored ink on glass surfaces with significant exposure to sunlight.Technical InformationTechnical information and data, recommendations, and other statements provided by 3M are based on information, tests, or experience which 3M believes to be reliable, but the accuracy or completeness of such information is not guaranteed. Such technical information and data are intended for persons with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. The typical values shown should not be used for the purpose of specification limits. If you have questions about this Product, contact the Technical Service helpline at 18886503497.ProblemSolutionDust and grit Wipe with a soft, damp cloth.Soiled (but not gritty)Use water and a soft clothHeavily SoiledClean first using a solution of mild liquid detergent andwater, then use clear water. Wipe gently with a soft cloth.Difficult StainsSpot clean with 70/30 IPA (70% Isopropyl Alcohol/30% Water) cleaning solutionType of Surface DamageAppearance of Surface Damage Method to Reduce VisibilityMarDragging an item, such as a colored briefcase, across the film and leaving a deposit of color on the surface.Rub with a soft cloth and warm soapy water to remove the mar.IndentationPressing into the film surface without breaking the surface, such as pressure from a chair.Carefully heat the indentation with a heat gun, which allows the film surface to rebound and reduce visibility.ScratchBreaking the surface layer of film leaving a slightly jagged whitish mark on the surface, such as by dragging a sharp rivet from a purse.Rub with a surface restorer such as 3M™ Marine Vinyl Cleaner & Restorer to reduce the visibility of scratches.GougeBreaking though the entire film, such as severe impact from sharp chairs or carts.Repair by cutting out the damaged film and replac-ing that piece with the same pattern of film or remove and replace an entire panel of film. 3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022

Page 15

3M™ DI-NOC™ Architectural FinishesLEEDv4 CREDITSThis section describes some of the options for acquiring LEED credits using 3M DI-NOC Architectural Finishes. NOTE: Each application is different. It is the sole responsibility of the end user to evaluate and determine whether LEED credits can be applied.ID+C MR Credit, Interiors Life-Cycle Impact Reduction - Option 1: Interior Reuse - Product can be used to refinish salvaged, refurbished, or reused nonstructural materials.- Option 2: Furniture Reuse - Product can be used to refinish salvaged, refurbished, or reused furniture and furnishings.ID+C, BD+C MR Credit, Construction and Demolition Waste Management - Option 2: Product can be used to refinish salvaged, refurbished, or reused interior materials minimizing overall construction waste.ID+C, BD+C EQ Credit, Low-Emitting Materials- Product has been tested to and is in compliance with the General Emissions Evaluation (California Department of Public Health(CDPH) Standard Method V1.1-2010 and V1.2-2017BD+C MR Credit, Building Life-Cycle Impact Reduction- Option 3: Building and Material Reuse - Product can be used to refinish permanently installed interior elements (e.g. walls, doors).BD+C MR Credit, Furniture and Medical Furnishings- Option 3: Multi-attribute assessment of products - Product can be used to refinish permanently installed interior elements (e.g. walls,doors).O+M MR Credit, Purchasing - Facility Maintenance and Renovation - Product can be used to refinish permanently installed interior elements (e.g. walls, doors)- Product has been tested to and is in compliance with the General Emissions Evaluation (California Department of Public Health(CDPH) Standard Method V1.1-2010 and V1.2-2017)BUILDING PRODUCT DISCLOSURE AND OPTIMIZATION INFORMATIONEnvironmental Product Declaration (EPD) or Life Cycle Analysis (LCA) EPD and/or LCA information not available.Raw Material Source and Extraction ReportingRaw Material source and extraction information for this product is considered to be 3M confidential and is therefore not available.Extended producer responsibilityTake-back or recycling program for this product is not available.Bio-based materialsProduct have not been tested to ASTM D6866.Wood productsProduct does not contain wood-based materials.Materials reuseProduct can be used to refinish salvaged, refurbished, or reused materials and furniture.Recycled contentProduct does not contain pre- or post-consumer recycled content.3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022 15

Page 16

16 3M™ DI-NOC™ Architectural FinishesMaterial Ingredient ReportingProduct ingredient information for this product is considered to be 3M confidential and is therefore not available .GreenScreen Certified™ or Cradle to Cradle Certified®Assessment or Certification not available on this product.REACH OptimizationREACH Substance of Very High Concern certifications are on 3M.com/Regs (US) or 3M.com/SVHC (Europe).Product Manufacture Supply Chain OptimizationBased on our analysis, 3M meets required process and safety requirements as outlined in the criteria.Location Valuation FactorBased on supply chain, this product would not meet location valuation factor requirements of being extracted, manufactured, and purchased within 100 miles.Proposition 65This Product is developed and commercialized for the purposes of industrial and commercial uses only; therefore, it is not evaluated for compliance with any local, regional, or global consumer regulations. Certain chemicals of this Product are listed by OEHHA for California Proposition 65 under the Safe Drinking Water and Toxic Enforcement Act of 1986.3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022

Page 17

173M™ DI-NOC™ Architectural FinishesWARRANTYProduct3M™ DI-NOC™ Architectural Finishes (the “Product(s)”) are decorative films for use only in interior applications in commercial buildings (“Interior Applications”).3M Basic Product WarrantyThe Product(s) specified in this document are warranted to be free of defects in materials and manufacture (“3M Basic Product Warranty”) on the date of shipment (“Warranty Period”) by 3M or its authorized distributor.Limited Warranty1. For Products used in Interior Applications in the United States, 3M makes the following warranty (the "3M Limited Warranty") for theapplicable time period stated below ("Warranty Period"), which will begin on the Product installation date.The Product will have no significant discoloration, cracking or other similar visual defects for the applicable time period below: 2. 3. 4. 5. Application Warranty PeriodInterior Applications 10 years ¹Exterior ApplicationsUse 3M™ DI-NOC™ EX Series Product 2discovery of the 3M warranty claim, whichever is earlier.3M must receive any 3M warranty claim in writing no later than 10 business days after (a) the end of the Warranty Period or (b) theSIBLE FOR DETERMINING IF A PRODUCT IS SUITABLE FOR ITS PARTICULAR PURPOSE AND APPLICATION METHODS.ULAR PURPOSE AND THOSE ARISING FROM A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. THE BUYER IS RESPON-BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTIC-WARRANTY ARE MADE IN LIEU OF ALL OTHER WARRANTIES, RIGHTS OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING,EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THE 3M BASIC PRODUCT WARRANTY AND THE 3M LIMITEDinstallation without proper surface preparation, or (e) exposed to excessive heat, humidity, dirt or UV light.anyone other than 3M; (d) improperly installed, including, without limitation, installation after the expiration the Product’s shelf life orand in all Other Product Information; (c) damaged through contact with a person or thing, misuse, accident, neglect, or other action byaltered or processed in any manner; (b) stored, applied, installed, or used in a manner other than that 3M recommends in this document3M has no obligation under the 3M Basic Product Warranty or the 3M Limited Warranty as to Product that has been: (a) modified,ranty and the 3M Limited Warranty, and does not warrant any Other Product Information.and other informationor materials relating to a Product (“Other Product Information”), but 3M makes only the 3M Basic Product War-For a buyer’s convenience, 3M may provide engineering or technical information, recommendations, installation instructions or guides,2 - See 3MTM DI-NOCTM EX Series Tech Datasheet for exterior warranty. Exterior applications of standard DI-NOC are not warranted.1 - Except VM, AM, and HG have 5 years interior warranty period.3M™ DI-NOC™ Architectural Finishes Technical Data Sheet - Revision Q March 2022

Page 18

3M™ DI-NOC™ Architectural FinishesCommercial Solutions3M Center, Building 220-12E-04St. Paul, MN 551441-888-650-34973M.com/AMDWarranty (continued)Limited RemedyIF ANY PRODUCT IS PROVEN NOT TO HAVE MET THE 3M BASIC PRODUCT WARRANTY OR THE 3M LIMITED WARRANTY DURING THE WARRANTY PERIOD, THEN THE BUYER’S EXCLUSIVE REMEDY, AND 3M’S SOLE OBLIGATION, WILL BE, AT 3M’S OPTION, TO REPLACE THE NONCONFORMING PRODUCT OR TO REFUND THE NONCONFORMING PRODUCT’S PURCHASE PRICE.No Extension of WarrantyIn the case of an approved warranty claim, the replacement Product will carry only the remaining term of the original warranty period.Limitation of Liability3M WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO A BUYER FOR DIRECT (other than the Limited Remedy stated above), SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS) IN ANY WAY RELATED TO THE PRODUCT, THE TECH DATA SHEET OR OTHER PRODUCT INFORMATION, REGARDLESS OF THE LEGAL OR EQUITABLE THEORY ON WHICH SUCH DAMAGES ARE SOUGHT.© 3M 2022. All rights reserved.3M, Comply and DI-NOC are trademarks of 3M. Used under license by 3M subsidiaries and affiliates. All other trademarks are property of their respective owners.Revision Q, March 2022 Please recycle.