Return to flip book view

Instruction For Making Custom Cover 8 5x11 Layflat Clamp Photobook Instruction For Making Custom Cover 8 5x11 Layflat Clamp Photobook White Print Cover Clamp Slide Custom Cover photobook is now ready to be made Black Photobook Printed LayFlat Pages 1a 1 Before you start Materials Needed to assemble custom cover photobook Insert white print cover into the printer as shown in photo 1a Be sure the white printed cover is aligned along the edge of the black line at the bottom and top of the printer see red arrows in photo 1b 2a 4a 2b 4b 2 Place the printed cover face down on a flat surface Remove both of the small thin white inner liners as shown in photos 2a and 2b 3 Place the black photobook upright on a flat surface 1b 4 Wrap the printed cover around the black photobook and fold in the flaps as shown in photos 4a and 4b Page 1 of 2 5 Keeping the book upright run your fingers along the front edge and back edge of the spine as shown in photo to affix the printed cover to the spine of the black photobook

Instruction For Making Custom Cover 8 5x11 Layflat Clamp Photobook Instruction For Making Custom Cover 8 5x11 Layflat Clamp Photobook 8a 7a 8b 6a 6b 6c 6 Lay the wrapped book back down on a flat surface as shown in photo 6a Remove the large white liner from the inside front of the printed cover as shown in photo 6b Gently lay the printed cover back down on the front of black photobook as shown in photo 6c Run your hand over the front of the book to fully affix the front cover to the black photobook 7b 7 Open the front cover and peel off the white liner as shown in photo 7a Fold over the flap to adhere to the inside of the black photobook as shown in photo 7b 8c 8 Flip the book over to begin to adhere the back cover to the black photobook as shown in photo 8a Open the back cover and peel off the white liner as shown in photo 8b Gently lay the printed cover back down on the back of the black photobook Open the back cover and peel off the white liner to the flap Fold over the flap to adhere to the inside back of the black photobook as shown in photo 8c Front Back 10a 10b 9 Insert the printed photo pages onto the clamp slide hold the photos close to the edge nearest the clamp NOTE Clamp is snug 10 Fold the black photobook inside out as shown in photo 10a Slide the clamp through both guides in the channel of the spine of the black photobook to complete assembly 11 Custom Cover LayFlat Photobook is now ready for the customer Page 2 of 2 Inside