Return to flip book view

Message THE FLOOR JOIST REVOLUTION

C-SPAN IS A LIGHT WEIGHT FLOORING SYSTEM DESIGNED TO REPLACE TIMBER & WEB JOISTS WHY CHOOSE C-SPAN ? Less cost than LVL’s, timber or web joists!Less labour required for assembly!Less screw joints virtually eliminating “squeaks”!Faster erection time on site with no on-site waste!Lower ceiling height and wet area step down options!Eliminates the need for blocking between joists at ends!Rim joists provide larger surface area to fix wall cladding!Termite proof and highly fire resistant!Suitable for all types of constructionManufactured utilising “state of the art” rollformers, the system comprises both joists and perimeter frame with the joists sitting at the same level as the perimeter, achieving a full load transfer for multi-level dwellings providing strength and reliability.!"! THE IDEAL SOLUTION FOR MID-FLOORS

THE BENEFITS OF C-SPAN A FULLY ENGINEERED SYSTEM!C-Span engineered steel floors can be installed in a matter of minutes rather than hours or days saving time, removing waste and reducing site working risks. Progress of the project is less affected by weather and makes assembly easier on tight or difficult work sites.!PRE-PUNCHED SERVICE HOLES C-Span is manufactured with flared service holes to increase strength and ensure the services are not damaged with any sharp edges. These allow for services to be installed without having to modify the floor system.!C-Span joists are light. The 300 x 1.95mm joist weighs only 6.4 kg per metreC-Span joists will not warp rot or rust are termite proof and will not burn.C-Span joists can span 6+ metres at 450mm centres for domestic loads providing greater flexibility and cost saving options.C-Span floor system includes a rim joist eliminating the need for blocking and offers a large area for fastening wall cladding.C-Span can be used with timber or steel framing and most wall systems.C-Span joists can be boxed to eliminate structural steel beams in many cases.C-Span generally does not require a crane for installation for two storey constructionC-Span assembly time is fast so that carpenters can immediately start the assembly of the next level saving time, money and fast tracking other trades and suppliers.

Perimeter beams and C channels feature a tab pre-punched with screw holes eliminating any measuring, cutting or welding and positively locating the joists for fast and accurate installationFloors are delivered flat packed to site ready for installation on site reducing freight costs. !C-Span can be supplied as a pre-assembled cassette ready to lift into place. Ideal for townhouse projects.C-Span is ideal for mid-floors on townhouse projects with pre-punched holes for services and can be designed for up to 5Kpa loadings suitable for mezzanine floors in commercial property.With 250mm and 300mm sections, C-Span is easily configured for sub-floors on sloping sites.!Decks can be cantilevered and C-Span can be engineered for connecting to concrete walls

HIGH QUALITY STEELC-Span is manufactured from steel with a minimum yield stress of 550MPa, a minimum tensile stress of 550MPa and a minimum galvanised coating thickness of 350g/sqm. Available in 250mm and 300mm sections, C-Span is ideal for sub-floor and mid-floor applications. For locations close to the ocean, salt water rivers or lakes,C-Span is also available in ZinMag ZM310 with 7-10 times the corrosion resistance of regular galvanised steel.THE COATING Manufactured to AS1397:2011, the ZINMAG ZM310 steel used in the manufacture of Modfloor is coated with a zinc-aluminium-magnesium alloy that is highly resistant to corrosion. These alloys have been developed to provide a breakthrough solution in surface corrosion and cut edge protection suitable for aggressive environments. SALT SPRAY TESTING ZINMAG ZM 310 has been tested in Australia under ASTM B117-19 and found to be totally rust, corrosion and delamination free after 2,000 hours of testing. General rules can be applied to estimate the equivalence between salt spray test hours and real-life exposure suggesting that 24 hours of salt spray testing can be roughly equivalent to one year of exposure in a marine environment. On this basis 2,000 of successful testing relates to many years of strong corrosion resistance with up to 50 year warranties INDICATIVE SPAN TABLES Section dimensions for 300mm web and 15mm flange utilising 1.95mm BMT

EMAIL:% % sales@cspan.com.au!WEB:% % www.cspan.com.au!OFFICE:% 07 2111 7979!MOBILE:% 0412 918 2197!FACTORY:%10-84 Christensen Road South Qld, 4207!POST:% P.O. Box 672 Sanctuary Cove Qld. 4212