Return to flip book view

CAL 2000LT The Best Method for Calibrating Gas Monitors CSA NRTL C Exia T 6 approved intrinsically safe with CE mark and ATEX certification Non hazardous shipping Built in mass flow sensor Akaline battery powered NIST traceable certificate Interchangeable calibration gases Multiple languages included Versatile The CAL 2000 LT is a microprocessor controlled calibration gas instrument with interchangeable and field replaceable gas generating sources Each source provides up to 25 cylinders or 25 hours worth of gas at a fraction of the cost A built in mass flow sensor automatically compensates for altitude and temperature The instrument is available in preset flow rates of 0 5 or 1 0 LPM Generating sources are rated at ten or 25 hours and are available for chlorine hydrogen hydrogen cyanide and hydrogen sulfide A gas concentration must be specified when ordering generating sources over a range of 1 to 25 PPM in whole PPM increments To change gas type or concentration simply insert a different source into the instrument Specifications Air Flow Rate with internal pump 0 5 flow rate must be specified when ordering Useful Source Life Warm up time to 90 LxWxH or 1 LPM Weight Operating Temperature Relative Humidity 10 or 25 hours Approx 5 minutes 8 50 x 4 25 x 3 00 21 59 x 10 8 x 7 62 cm 3 lb 1360 g 0 C to 50 C 0 100 Accuracy Repeatability Battery Power Battery Life 10 5 4 alkaline C 10 hours intermittent use Gas Options Gas Cl2 Chlorine 1 0 25 H2 S Hydrogen Sulfide 1 0 25 Hydrogen 1 0 25 Hydrogen Cyanide 1 0 25 H2 HCN Certifications CSA ATEX CE Available Generating Life 10 or 25 hours Non hazardous Shipping Yes Interchangeable Gases Yes No Shelf Degradation Yes Mass Flow Feedback Yes Advanced Calibration Designs Inc 2024 W McMillan St Tucson AZ 85705 USA www goACD com acd goACD com 520 290 2855 800 737 0223 Brochure CAL2000LT PPM