Return to flip book view

40www.directmetals.com800.711.4939Pultruded Grating Resin SystemsOur ASTM E84 pultruded grating is available in two resin formulations for an accurate match of product characteristics with the application. Both resin systems provide corrosion resistance that is superior to that offered by metal grating.IFR-25 - This isophthalic polyester resin formulation provides a low ame spread rating of 25 or less, and is designed for applicationswhere there is moderate exposure to corrosive elements.VFR-25 - With a ame spread of 25 or less, this vinyl ester resin system provides dependable resistance to both acidic and alkalineenvironments.CLIP ASSEMBLIES FOR MOLDED GRATINGWe offer specially designed attachments and clips, both to fasten panels together and to secure them to support structures. All types are made of Type 316 Stainless Steel, and are available in 1", 1-1/2" and 2" sizes. Install clips a maximum of every 48" and use at least four clips per piece of grating (at least eight clips per 4' x 12' panel) RESIN SERIES STANDARD COLOR IFR-25 & VFR-25 T3810, T2510, T3815, T2515 YELLOW & DARK GRAY IFR-25 & VFR-25 T1210, T1215 LIGHT GRAY IFR-25 & VFR-25 I6010, I6015, I4010, I4015, T3320, T5020 YELLOW & DARK GRAY VFR-25 H4710, H4715, H4720, H4725, H4730 YELLOW & DARK GRAYFIBERGLASSTYPE Z HOLD DOWN CLIPS:Secure grating panelsto support frames.TYPE F END PANEL CLIPS:Provide a simplied method for joining factory edges of adjacent abutting panels. (Not for use with some resins)TYPE G HOLD DOWN CLIPS:Attach grating to any structural member ange, 3/4" or smaller in thickness, with no drilling required.TYPE M HOLD DOWN CLIPS:Secure panels to a support in the same manner as type Z Clips, but designed to use two adjacent grating bars for a more secure t. Similar in design to metal gratingsaddle clips.Field cutting of one bar requiredCLIP ASSEMBLIES FOR PULTRUDED GRATINGWe offer Hold Down Clip Assemblies for many pultruded grating typesCLIP TYPE• P18 for 18% open area pultruded grating• P25 for 25% open area pultruded grating• P33 for 33% open area pultruded grating• P40 for 40% open area pultruded grating• P50 for 50% open area pultruded grating• P60 for 60% open area pultruded gratingSEALING KITSTo maintain corrosion resistance and structural integrity, we offer standard resin sealing kits for protecting theexposed ends of cut panels and other components.TYPE P