The NEW STANDARD in Performance 2016 PRODUCT CATALOG
The NEW STANDARD in Performance  2016  PRODUCT CATALOG
STARFIRE Premium Products provides exactly what today’s distributor and customer need – a complete, diversified line of premium quality products and packaging options to satisfy their applications and provide considerable cost savings over comparable branded products. This philosophy has not only enabled STARFIRE to grow into one of the fastest growing brands of lubricants, antifreeze and chemicals, but has also created one of the most loyal networks of distributors and customers. STARFIRE premium quality lubricants, coolants & chemicals are considerably less expensive than the branded products on the market. STARFIRE Premium Products are formulated to meet or exceed the latest specifications for their respective applications. As always, all of these products are available in bulk options – pails, drums, totes and bulk transports, delivered nationwide! “If we can’t save you money and increase your bottom line, with the highest quality products, then we don’t deserve your business!” Kurt Deimer President/CEO
STARFIRE Premium Products provides exactly what today   s distributor and customer need     a complete, diversified line o...
Contents 3 Premium Motor Oils 4 Synthetic Blend Motor Oils 5 Full Synthetic Motor Oils 6 dexos 1 Full Synthetic Motor Oils ® 7 High Mileage Motor Oils 8 Performance 20W50 9 Full Synthetic Multi-Vehicle ATF 10 MERCON® V ATF 11 DEXRON®-VI Low Viscosity ATF 11 ATF+4® ATF 12 Multi-Purpose ATF DEXRON III/MERCON 12 Type F ATF 13 Full Synthetic CVT Fluid 14 6-Gallon Eco-Box & Dispensing System 15 Synthetic Blend 15W40 Engine Oil 16 HD30 Heavy Duty Motor Oil 17 Full Synthetic Gear Lubricants 18 Conventional Gear Lubricants 18 GL-1 SAE 90 Gear Lubricant 19 Non-Detergent Motor Oils 20 AW Hydraulic Oils 20 R&O Oil 21 Premium J20C Tractor Hydraulic Fluid 22 Universal Tractor Hydraulic & Transmission Fluid 23 Conventional Green Antifreeze/Coolant 24 All Makes All Models Antifreeze/Coolant 25 Purecool Extended Life Antifreeze/Coolant 26 Purefleet SCA Precharged Antifreeze/Coolant 27 Purefleet Heavy Duty ELC Antifreeze/Coolant 28 Purefleet EXTREME Heavy Duty ELC Antifreeze/Coolant 29 Brake Fluid 29 Power Steering Fluid 30 Rv & Marine Antifreeze (-50°F) 30 Windshield Washer Fluid 30 Supertack Bar & Chain Oil 31 Blue Panther DEF 32 Low VOC Brake/Parts Cleaner 32 Starting Fluid 33 Hi-Temp Red/Multi-Purpose EP2 Grease 33 Multi-Purpose EP2 Grease 3% MOLY EP2 Grease TC-W3 Premium 2-Cycle Engine Oil ® 34 35
Contents 3  Premium Motor Oils 4  Synthetic Blend Motor Oils  5  Full Synthetic Motor Oils 6  dexos 1 Full Synthetic Motor...
Premium Motor Oils STARFIRE PREMIUM MOTOR OILS are fully licensed motor oils that meet or exceed the latest manufacturer’s requirements for use in passenger car, SUV and light duty truck gasoline engines, powerboats, motorcycles and other stationary and mobile equipment. They are formulated with the highest quality, hydrotreated, paraffinic lubricating oils and a technologically advanced additive system, which includes detergents, dispersants, viscosity improver, anti-wear and anti-friction agents, and oxidation and corrosion inhibitors. APPLICATIONS • When API licensed SN, SM, SL oils are required • When ILSAC GF-5, GF-4, etc. are required (5W-20, 5W-30, 10W-30) • Meet or exceed the latest manufacturer’s requirements for use in passenger car, SUV and light duty truck gasoline engines, powerboats, motorcycles and other stationary and mobile equipment. BENEFITS • Excellent Fuel Economy • Reduced friction for excellent protection against engine wear • High resistance to viscosity and thermal breakdown • Excellent anti-wear, anti-foam, bearing corrosion and anti-rust protection • Fights volatility burn-off to minimize engine deposits and exhaust emissions 5W-20 5W-30 10W-30 10W-40 51.33 8.73 63.51 10.78 63.85 10.35 94.59 14.34 149 161 150 157 Specific Gravity @ 60°F (15.6°C) 0.863 0.858 0.863 0.865 Gravity, °API 32.37 33.4 32.37 31.99 -49 -49 -44 -44 403 406 SAE GRADE Viscosity: cSt @ 40°C cSt @ 100°C Viscosity Index Pour Point, °F Flash Point (PMCC),°C CCS Viscosity, cP 403 399 6305 (-30 °C) 5900 (-30 °C) Noack Volatility 14.8 14.6 14.5 11.7 ILSAC GF-5 Certified YES YES YES NO 3 STARFIRE Product Catalog 2016 4000 (-25 °C) 4750 (-25 °C) “ Once this product is on your shelf, your customers will begin to ask for it by name. — Ray Wood, STARFIRE Distributor (OH) ”
Premium Motor Oils STARFIRE PREMIUM MOTOR OILS are fully licensed motor oils that meet or exceed the latest manufacturer  ...
Synthetic Blend Motor Oils STARFIRE SYNTHETIC BLEND MOTOR OILS are fully licensed motor oils that meet or exceed the latest manufacturer’s requirements for use in passenger car, SUV and light duty truck gasoline engines, powerboats, motorcycles and other stationary and mobile equipment. They are formulated from selected highly refined paraffinic base oils, synthetic base oils and carefully selected advanced additive technology to provide superior thermal and oxidation stability, corrosion and valve train wear protection and prevent the formation and accumulation of deposits and sludge. APPLICATIONS • When API licensed SN, SM, SL, SJ, SH, SG, SF, SE, SD or SC oils are required • When ILSAC GF-5, GF-4, etc. are required (5W-20, 5W-30, 10W-30) • Starfire 5W-20 can be used when Ford WSS-M2C945-A is specified • Starfire 5W-30 can be used when Ford WSS-M2C946-A or Chrysler MS-6395S is specified • Meet or exceed the latest manufacturer’s requirements for use in passenger car, SUV and light duty truck gasoline engines, powerboats, motorcycles and other stationary and mobile equipment. BENEFITS • Excellent Fuel Economy • Superior Synthetic Blend Protection against thermal breakdown • Excellent protection from deposits at all operating temperatures • Excellent cold-cranking capabilities • Excellent anti-wear, anti-foam, bearing corrosion and anti-rust protection 5W-20 5W-30 10W-30 10W-40 51.33 8.73 63.51 10.78 75.28 10.17 89.75 13.07 Viscosity Index 149 161 142 145 Specific Gravity @ 60°F (15.6°C) 0.86 0.858 0.868 0.871 Gravity, °API 32.37 33.4 31.42 30.86 -49 -49 -44 -44 399 403 410 SAE GRADE Viscosity: cSt @ 40°C cSt @ 100°C Pour Point, °F Flash Point (PMCC),°C CCS Viscosity, cP 403 6305 (-30 °C) 5900 (-30 °C) 5050 (-25 °C) 6032 (-25 °C) Noack Volatility 14.8 14.6 14.4 11.7 API: RC *Resource Conserving* YES YES YES NO ILSAC GF-5 Certified YES YES YES NO STARFIRE Product Catalog 2016 4
Synthetic Blend Motor Oils STARFIRE SYNTHETIC BLEND MOTOR OILS are fully licensed motor oils that meet or exceed the lates...
Full Synthetic Motor Oils STARFIRE FULL SYNTHETIC MOTOR OILS are premium quality 100% synthetic motor oils formulated from superior synthetic base oils and carefully selected advanced additive technology. Starfire full synthetic motor oils can be used in virtually all service classifications for gasoline engines domestic and foreign and are fully compatible with all other synthetic and petroleum based motor oils. APPLICATIONS • When API SN and SN-RC and ILSAC GF-5 are required • Can be used in virtually all service classifications for gasoline engines domestic and foreign • Fully compatible with all other synthetic and petroleum based motor oils. BENEFITS • 100% synthetic motor oil • Excellent Fuel Economy • Superior Protection against thermal breakdown • Excellent protection from deposits at all operating temperatures • Excellent cold-cranking capabilities • Excellent anti-wear, anti-foam, bearing corrosion and antirust protection • Excellent cold-cranking capabilities SAE GRADE 0W-20 5W-20 5W-30 10W-30 Viscosity: cSt @ 40°C cSt @ 100°C 43 8.27 50.93 8.83 63.95 10.93 61.71 10.14 Viscosity Index 171 153 163 151 Pour Point, °F -49 -49 -49 -44 Flash Point (COC), °F 399 428 431 410 Specific Gravity @ 60°F (15.6°C) 0.848 0.852 0.854 0.855 Gravity, °API 35.36 34.54 34.15 33.86 CCS Viscosity, cP 5300 (-35 °C) 5226 (-30 °C) 5100 (-30 °C) 3884 (-25 °C) Noack Volatility 12.6 10.9 10.5 8.2 5 STARFIRE Product Catalog 2016
Full Synthetic Motor Oils STARFIRE FULL SYNTHETIC MOTOR OILS are premium quality 100  synthetic motor oils formulated from...
dexos 1® Full Synthetic Motor Oils STARFIRE dexos 1® FULL SYNTHETIC MOTOR OILS are state of the art, advanced technology motor oils formulated with sophisticated additives to prevent sludge formation commonly caused by moisture and combustion byproducts. An exceptionally high viscosity index minimizes cold weather oil thickening, preventing battery drain and engine wear, even at subzero startups. Exceeds GM dexos1® specifications for world-wide warranty requirements for all GM automotive gasoline engines currently in use. APPLICATIONS STARFIRE dexos 1® Full Synthetic Motor Oils are for use in all Buick, Chevrolet, Cadillac and GMC vehicles starting in 2011 model year. They are also an excellent choice for previous model year vehicles produced by GM. They are recommended and suitable for use in all passenger cars, sports utility vehicles and light duty trucks operating on gasoline specifying API service category SN, SM, ILSAC GF5, GF-4, Chrysler MS-6395M, Ford M2C930-A (5W-20) and Ford M2C929-A (5W-30). BENEFITS • Licensed and approved through General Motors (License # RB1D0425025) • Fuel economy improvements • Meets manufacturers’ latest warranty requirements • Protection for high temperature, high performance turbocharged vehicles • Enhanced rust protection for Flex Fuel Vehicles, specifically those that run on ethanol-based fuel (E85) TYPICAL PROPERTIES 0W20 5W-20 5W-30 Viscosity: cSt at 40°C cSt at100°C 42.31 8.06 50.93 8.835 63.95 10.93 Viscosity Index 167 153 163 Pour Point, °F -54°F -49°F -49°F Gravity, °API 34.74 34.54 34.15 0.8512 0.8522 0.8542 CCS Viscosity, cP 5379 (-35°C) 5226 (-30°C) 5110 (-30°C) Noack Volatility 12.7 10.9 10.5 Color 2.5 2.5 2.5 Specific Gravity @ 60°F (15.6°C) “ We have had great success with the STARFIRE line of products and quality they represent. We also like the fact they keep pushing their standards to bring more products on line to meet our customer’s needs. ” ­ John Boswell, — STARFIRE Distributor (OH) STARFIRE Product Catalog 2016 6
dexos 1   Full Synthetic Motor Oils STARFIRE dexos 1   FULL SYNTHETIC MOTOR OILS are state of the art, advanced technology...
High Mileage Motor Oils STARFIRE HIGH MILEAGE MOTOR OILS are fully licensed motor oils that meet or exceed the latest manufacturer’s requirements for use in passenger car, SUV and light duty truck gasoline engines. They are specially formulated for higher mileage vehicles – those with 75,000 miles or more - to help protect worn seals, reduce oil loss and prevent leaks from forming. Starfire High Mileage Motor Oils are made with highly refined paraffinic base oils, advanced additive technology and special seal conditioners, to provide superior thermal and oxidation stability, anti-corrosion and valve train wear protection and prevent the formation and accumulation of deposits and sludge. APPLICATIONS • Vehicles with 75,000 miles or more • When API licensed SN, SM, SL oils are required • Meet or exceed the latest manufacturer’s requirements for use in passenger car, SUV and light duty truck gasoline engines, powerboats, motorcycles and other stationary and mobile equipment BENEFITS • Special additives and seal conditioner for older vehicles • Helps combat engine oil consumption • Prevents leaks from forming • Helps reduce oil loss caused by burn-off • Superior protection against thermal breakdown • Excellent protection from deposits at all operating temperatures • Excellent anti-wear, anti-foam, bearing corrosion and anti-rust protection SAE GRADE 5W-20 5W-30 10W-30 Viscosity: cSt @ 40°C cSt @ 100°C 51.3 8.73 63.51 10.78 75.28 10.17 Viscosity Index 149 161 142 Pour Point, °F -49 -49 -44 Flash Point (COC), °F 403 399 403 Specific Gravity @ 60°F (15.6°C) 0.863 0.858 0.868 Gravity, °API 32.37 33.4 31.42 6305 (-30 °C) 5900 (-30 °C) 4000 (-25 °C) Noack Volatility 14.8 14.6 14.4 ILSAC GF-5 Certified YES YES YES CCS Viscosity, cP 7 STARFIRE Product Catalog 2016
High Mileage Motor Oils STARFIRE HIGH MILEAGE MOTOR OILS are fully licensed motor oils that meet or exceed the latest manu...
Performance 20W50 STARFIRE PERFORMANCE 20W50 MOTOR OIL is a race performance, premium quality oil formulated for gasoline engines. It contains only the highest quality, hydrotreated, paraffinic lubricating oils and a technologically advanced additive system, which includes detergents, dispersants, viscosity improver, anti-wear and anti-friction agents, and oxidation and corrosion inhibitors. APPLICATIONS STARFIRE 20w50 motor oil is acceptable for use in all domestic and foreign automotive gasoline-fueled passenger cars and light-duty trucks where an SAE 20w50 that meets API SN, SM or SL is specified. BENEFITS • Superior Protection against thermal breakdown • Excellent protection from deposits and sludge at all operating temperatures • Excellent oxidation stability • Excellent corrosion and valve train-wear protection TYPICAL PHYSICAL PROPERTIES: Viscosity: cSt @ 40°C cSt @ 100°C 169.8 19 Viscosity Index 127 Pour Point, ºF -27 Flash Point (COC),ºF 406 Gravity, ºAPI 29.63 Specific Gravity @ 60ºF (15.6ºC) 0.878 Zn (ppm) 850 P (ppm) 770 Ca (ppm) 1900 CCS Viscosity, cP 4500 Noack Volatility 7014 (-15 ºC) 5.1 STARFIRE Product Catalog 2016 8
Performance 20W50 STARFIRE PERFORMANCE 20W50 MOTOR OIL is a race performance, premium quality oil formulated for gasoline ...
Full Synthetic Multi-Vehicle ATF STARFIRE FULL SYNTHETIC MV ATF is a high performance multi-vehicle transmission fluid that is specially formulated for use in most high viscosity planetary gear transmission applications. STARFIRE Full Synthetic MV ATF is manufactured using premium synthetics and an additive package for superior protection from corrosion and wear as well as severe anti-shudder durability. STARFIRE Full Synthetic MV ATF is suitable for use in most passenger car and light truck applications including: Aisin Warner AW-1* Allison C-4 Allison C-3 Allison TES-295 Allison TES-389 AS 68 RC (T IV) Audi G 052 025 Audi G 052 162 Audi G 055 025 Audi 5HP LT 71141 (Audi G-052-162-A1 / A2) Audi 5HP (ZF 5 HP 30) Audi G-055-025-A2(JWS 3309) BMW ETL-7045, 7045E (83 22 0 026 922) BMW LA2634 BMW LT 71141 BMW 5 HP (ZF 5 HP 30) BMW 5 HP LT 71141 BMW MINI 83 22 0 402 413 9 (JWS 3309) Caterpillar Powershift TO-2 Chrysler ATFs Chrysler Mopar AS 68 RC (T IV) Daewoo LT 71141 DEXRON® DEXRON®-II, IID, IIE DEXRON®-IIIF, IIIG, IIIH DEXRON® VI* Esso LT 71141 Fiat, Typo T IV Ford FNR5 Ford MERCON® (XT-2-QDR, XT-2-QSM SYN) Ford MERCON® V Ford WSS M2C 922 A1, 924-A (XT-8-QAW) (JWS 3309) GM Type A GM T IV Honda DW-1 Honda ATF-Z1 Hyundai/Kia Red 1, SP-II, III Hyundai/Kia SP-IV* Hyundai NWS-9638* Idemitsu K17 Isuzu Bescom ATF II, III Jaguar ATF 3403 M115 Jaguar LT 71141 JASO 1-A JWS 3309 (T IV) JWS 3324 (WS)* MAN 339F MAN 339 V1 MAN 339 V2 MAN 339 Z1 MAN 339 Z2 Mazda ATF-M III Mazda ATF-M V Mercedes Benz 236.1 Mercedes Benz 236.2 Mercedes Benz 236.5 Mercedes Benz 236.6 Mercedes Benz 236.7 Mercedes Benz 236.9 Mercedes Benz 236.10 Mercedes Benz 236.11 Mitsubishi SP-II, SP-III, SP IV, J2 NAG 1 (Jeep Cherokee) Nissan 402 Nissan Matic-D, J, K Nissan Matic-S* Porsche ATF 3403 M115 Porsche LT 71141 Saab T IV Saturn T IV Scion (All Vehicles) Shell 3403, M115 Shell LA2634 Subaru ATF, ATF-HP Suzuki ATF 3309 Texaco ETL-7045E Texaco ETL-8072B Texaco N402 Toyota T-III & T-IV Toyota WS (JWS 3324)* Voith 55.6335.XX (G607) Voith 55.6336.XX (G1363) Volvo 97340 Volvo 97341 VW G 052 025 VW G 052 162 VW G 052 099 VW G 055 025 VW 5HP LT 71141 (Audi G-052-162-A1 / A2) VW 5HP (ZF 5 HP 30) ZF TE-ML 03D, 04D, 05L, 09, 11B, 14A, 16L, 17C ZF TE-ML 14B ZF 5 HP 18FL / 19FL / 24A *Vis requirement not met TYPICAL PROPERTIES Viscosity: cSt @ 40°C cSt @ 100°C 33.64 7.41 Gravity, °API 34.66 Specific Gravity @ 60°F 0.8516 Viscosity Index Brookfield Viscosity at -40°C, cP 196 10,300 Flash Point (PMCC), ºC >170 Pour Point,, ºF -60 Appearance/Color Red 9 STARFIRE Product Catalog 2016 “ We have been using STARFIRE as our lead lubricant brand for 1½ years. STARFIRE has always offered a great product selection, competitive prices, with outstanding service. ” — Greg Davidson, STARFIRE Distributor (AL)
Full Synthetic Multi-Vehicle ATF STARFIRE FULL SYNTHETIC MV ATF is a high performance multi-vehicle transmission fluid tha...
MERCON® V ATF STARFIRE MERCON® V ATF is specially formulated with a unique combination of conventional base stocks and advanced additive technology to meet performance requirements of Ford automatic transmissions calling for MERCON® V fluid. Not for use in transmissions requiring Ford Type F fluid or Continuous Variable Transmissions (CVTs). Licensed by Ford Motor Co., Inc. – License # M5141201. STARFIRE MERCON® V ATF is suitable for use where the following automatic transmission fluids are recommended: automobile and truck automatic transmissions, power-shift transmissions and other types of service requiring an approved and Ford Mercon® V automatic transmission fluid. Dexron®-III (G, H), II (E, F) specifications, Honda Z-1, Nissan Matic-J and Toyota T-IV. CLAIMS INFORMATION Allison C-4*** Allison TES-389* Audi G 052 025, 052 162, 055 025* Esso 71141* BMW P/N 83 22 0 024 359, ETL-8072B* BMW P/N 83 22 0 0246 922, ETL-7045E* BMW P/N 83 22 0 403 249, ETL-8072B* BMW P/N 83 22 9 407 765, LA 2634* BMW P/N 83 22 9 407 807, LT 711 41* BMW 7045E, LA2634, LT71141* Dexron III G/H, Dexron II, Dexron, AW1* Honda DW-1, Z-1* Volvo P/N 1161540-8* Hyundai/Kia/Mitsubishi Diamond SP-II and SP-III, RED-1, SP-IV* Chrysler AS68RC, Diamond SP-III* Idemitsu K17* JWS 3309, Any 3309* M315-2004 JASO 1A, 2A*** MAN 339 Type Z1, Z2, V1** Mazda ATF M-III, MV, T-IV* MB236.1,2,5,6,7,9, 10, 11* Suzuki 3314, 3317* Ford P/N XT-2-DX (MERC), Ford P/ N XT-2-SM (SYN MERC)* Mercon V (XT-5-QM,XT-5-DM)*** Mercon, Ford ESP-M2C166-H* Nissan Matic-D, J, K, 402* Texaco N402* Shell 3403, LA2634, Texaco 7045-E, ETL-8072B* Hyundai NSWS9638* Fuchs 3353* IDEMITSU APOROIL ATF HP* ISUZU 08200-9001 / Genuine ATF* MINI P/N 83 22 0 402 413* Saturn P/N 21005966* SAAB P/N 22 717 466, 93 165 147 (AW-1)* Jaguar P/N WSS-M2C922-A-1* Porsche P/N 999 917 547 00 (A2)* VW P/N GUS 000 162* Shell ATF 134, 3353, 3403 M115* Subaru ATF, ATF-HP* Toyota T-II, T-III, T-IV, WS, Ford XT8QAW* Saturn T-IV, GM TASA, T-IV ATF, GM WS ATF* JWS 3324* Voith 55.6335 (G607)* Volvo Passenger Car (4 – 6 sp), Volvo 97340, 97341)* VW G 052 025, 162, 099, 055 025* ZF TE-ML 03D, 04D, 05L, 09, 11B, 14A, 16L, 17C, ZF TE-ML 14B * Suitable for Use ** Meets Requirements *** Approved TYPICAL PROPERTIES Viscosity: cSt @ 40°C cSt @ 100°C 35.43 7.56 cP @ -40°C, max. 13000 Viscosity Index, min. 189 Flash, COC, °F Pour Point,, °F 390 -60 Specific Gravity @ 60°F 0.8601 API Gravity 33.02 Color Red STARFIRE Product Catalog 2016 10
MERCON   V ATF STARFIRE MERCON   V ATF is specially formulated with a unique combination of conventional base stocks and  ...
DEXRON®-VI Low Viscosity ATF STARFIRE DEXRON®-VI LOW VISCOSITY AUTOMATIC TRANSMISSION FLUID is a full synthetic, high quality fluid designed to meet the specific requirements of General Motors automatic transmissions calling for DEXRON®-VI fluid. This high-quality product is also suitable for use where DEXRON®-II, DEXRON®-III, JASO M315(1A), Mercon® SP, Toyota WS, or Toyota T-IV fluids are recommended. BENEFITS • Full Synthetic • GM Approved • Protection against wear and transmission shudder • Resistance to thickening due to high temperatures • Friction stability to maintain smooth consistent shift performance TYPICAL PROPERTIES Viscosity: cSt @ 40°C cSt @ 100°C 28.56 5.797 Viscosity Index 151 Pour Point, °F -60 Specific Gravity @ 60°F (15.6°C) 0.8468 Gravity, °API 35.6 Color Red ATF+4® ATF STARFIRE ATF+4® AUTOMATIC TRANSMISSION FLUID is a uniquely blended, full synthetic fluid designed to meet the specific requirements of Chrysler and FCA automatic transmissions/transaxles specifying MS-9602®, MS-7176®, ATF+®, ATF+2®, ATF+3®, or ATF+4® fluids. BENEFITS • Full Synthetic • Excellent high and low temperature protection • Resistance to thickening due to high temperatures • Friction stability to maintain smooth consistent shift performance TYPICAL PROPERTIES Viscosity: cSt @ 40°C cSt @ 100°C 35.22 7.68 Viscosity Index 201 Pour Point, °F -54 Specific Gravity @ 60°F (15.6°C) 0.8508 Gravity, °API 34.81 Color Red 11 STARFIRE Product Catalog 2016
DEXRON  -VI Low Viscosity ATF STARFIRE DEXRON  -VI LOW VISCOSITY AUTOMATIC TRANSMISSION FLUID is a full synthetic, high qu...
Multi-Purpose ATF DEXRON III/MERCON® STARFIRE ATF DEXRON III/MERCON is a multipurpose automatic transmission fluid especially designed to meet the service requirements of a wide variety of applications. STARFIRE ATF DEXRON/MERCON is designed for newer generation, electronically controlled transmissions. APPLICATIONS • DEXRON® III H, DEXRON® III G, DEXRON® IIE, MERCON®, or Type A Suffix A • MERCON®, M2C138-CJ or M2C 166-H Fluids • When Allison C-4 Fluids and Caterpillar TO-2 Fluids • In Chrysler transmissions except where Chrysler MS-9602, MS-7176 or ATF+4 are required • In all 1979 thru 2005 transmissions built by Ford (exceptions: Ford FMX and pre-1980 C-4 transmissions and where Mercon V is required) BENEFITS • Superior cold temperature performance characteristics • Wide range of seal compatibility • Excellent wear protection and oxidation resistance • Fortified against rust and corrosion • Meets requirements for foam protection • Superior frictional characteristics with excellent friction retention and smooth shifting TYPICAL PROPERTIES Viscosity: cSt @ 40°C cSt @ 100°C 35.67 7.38 Viscosity Index 179 Pour Point, °F -60 Specific Gravity @ 60°F (15.6°C) 0.86 Gravity, °API 32.98 Brookfield Viscosity @ -40°C, cP 18,500 Color Red Type F ATF STARFIRE TYPE F ATF is specially formulated using high quality lubricating oils and a technologically advanced additive system. Engineered to extend transmission life and smooth operation of Ford automatic transmissions not requiring MERCON® or DEXRON® type fluid. Type F fluid is approved for all Ford automatic transmissions built prior to 1977 and certain models for years 1977 through 1980. Meets Ford specification for high static friction fluid and all warranty requirements for transmissions recommending a Type F fluid. BENEFITS • For use where Ford M2C-33F, M2C-33G and Ford Type F fluids are recommended • Excellent high and low temperature protection • Stable friction properties for smooth and consistent shifting • Excellent sheer stability • Outstanding resistance to wear, oxidation and varnish deposits TYPICAL PROPERTIES Viscosity: cSt @ 40°C cSt @ 100°C 38.11 7.47 Viscosity Index 167 Pour Point, °F -60 Specific Gravity @ 60°F (15.6°C) 0.8619 Gravity, °API 32.67 Color Red STARFIRE Product Catalog 2016 12
Multi-Purpose ATF DEXRON III MERCON   STARFIRE ATF DEXRON III MERCON is a multipurpose automatic transmission fluid especi...
Full Synthetic CVT Fluid STARFIRE CHAIN & BELT FULL SYNTHETIC CVT FLUID is specially formulated with a unique combination of full synthetic base stocks and an advanced additive technology designed for the specific demands of CVTs. This premium-quality product is recommended for use in most belt or chain driven Continuously Variable Transmissions and it is not a replacement for ATF. APPLICATIONS Starfire Chain & Belt Full Synthetic CVT Fluid is suitable for use in the following applications: • Audi/VW (TL 52180; G 052 180) • Ford (CVT30 / Mercon C) • Honda (HMMF) • Toyota (TC) • Nissan (NS1, NS-2) • Mitsubishi (CVTF-J1 / SP-III) • Subaru (NS-2 / Lineartronic CVTF) • Mini Cooper (EZL 799A) • Hyundai Genuine CVTF • Hyundai / Kia (SP-III) • Suzuki (TC / NS-2 / CVT Green 1) • Dodge / Jeep (NS-2 / CVTF+4) • GM/Saturn (DEX-CVT) • Ford (CVT23) • Toyota (TC) • Mercedes Benz (236.20) TYPICAL PROPERTIES Viscosity: cSt @ 40°C cSt @ 100°C 33.8 7.21 Viscosity Index 185 Pour Point, °F -60 Specific Gravity @ 60°F (15.6°C) 0.8538 Gravity, °API 34.23 Color Amber 13 STARFIRE Product Catalog 2016
Full Synthetic CVT Fluid STARFIRE CHAIN   BELT FULL SYNTHETIC CVT FLUID is specially formulated with a unique combination ...
6-Gallon Eco-Box & Dispensing System STARFIRE 6-GALLON ECO-BOX & DISPENSING SYSTEM is an innovative design that provides professional installers with a cost- effective alternative for offering a wider variety of STARFIRE motor oils and fluids. Installers can now inventory up to six different products in the same floor space as a single 55-gallon drum. The innovative Eco-Box design reduces environmental impact by reducing discarded plastic packaging by as much as 85% when compared to quart packaging. The flexible bag-in-box design also provides a significant reduction in residual oil that would normally be left in conventional plastic packing, so there is less wasted product! BENEFITS • Space-saving rack dispensing system • Up to 6 different products in the space of a single 55-gallon drum • Inventory cost savings • Environmentally friendly packaging reduces plastic waste • Reduces product residual waste STARFIRE ECO-BOXES ARE AVAILABLE IN: FULL SYNTHETIC MOTOR OIL • 0W-20 dexos 1® • 5W-20 dexos 1® • 5W-30 dexos 1® • 10W-30 SYNTHETIC BLEND MOTOR OIL • 5W-20 • 5W-30 • 10W-30 AUTOMATIC TRANSMISSION FLUID • Multi-Purpose ATF Dexron® III/Mercon® • Full Synthetic Multi-Vehicle ATF STARFIRE Product Catalog 2016 14
6-Gallon Eco-Box   Dispensing System STARFIRE 6-GALLON ECO-BOX   DISPENSING SYSTEM is an innovative design that provides p...
Synthetic Blend 15W40 Engine Oil STARFIRE SYNTHETIC BLEND 15W40 ENGINE OIL is specially engineered for heavy duty diesel and gasoline engines operating under all service conditions, including today’s emission controlled engines with EGR and diesel particulate filters using Ultra-Low Sulfur Diesel fuel (<15 PPM Sulfur) (ULSD) and Low Sulfur Diesel (LSD). APPLICATIONS Starfire Synthetic Blend Engine Oil meets or exceeds performance requirements for all heavy duty gas and diesel engines currently in use where a SAE 15W-40 that meets API CJ-4/SN is specified. RECOMMENDATIONS • Mack EO-O Premium Plus 07 • Volvo VDS-4 • DDC Power Guard • GLOBAL DHD-1 • Detroit Diesel 93K218 • Cummins CES 20081, 20077, 20076 • Renault RLD-3 • Caterpillar ECF-1a, ECF-2, ECF-3 • Mack EO-N Premium Plus 03, Mack EO-N Premium Plus, EO-M Plus, EO-M • Mercedes Benz 228.3 • Man 3275, DDC/MTU Series 2000/4000 category 1 and 2 engine performance • Volvo VDS-4, VDS-3, DHD-1 • ACEA E9-08, E7-04, E5 and E3 • JASO DH-2 • Allison C-4 • Caterpillar TO-2 PRODUCT DATA TEST METHOD TYPICAL Viscosity: cSt @ 40°C cSt @ 100°C D445 115 15.5 Viscosity Index D2270 142 Pour Point, °C (°F) D97 -40 (-40) Flash Point °C (°F) D92 238 (460) Neutralization No., TBN-E D2896 10 Sulfated Ash, wt.% D874 1.0 Cold Crank Simulator, cP D5293 6210/-20°C Mini-Rotary Viscometer TP1, cP D4684 19700/-25°C HTHS @ 150°C, cP D4683 4.2 15 STARFIRE Product Catalog 2016
Synthetic Blend 15W40 Engine Oil STARFIRE SYNTHETIC BLEND 15W40 ENGINE OIL is specially engineered for heavy duty diesel a...
HD30 Heavy Duty Motor Oil Starfire HD30 Heavy Duty Motor Oil is formulated with high viscosity index paraffinic base oils and select additive technology to provide superior thermal and oxidative stability, corrosion and valve train wear protection and prevent the formation and accumulation of deposits and sludge. It is designed for modern day, heavy duty diesel engines operating in both highway and off-highway applications. APPLICATIONS STARFIRE HD30 Heavy Duty Motor Oils are recommended for modern day, heavy duty diesel and gasoline engines. It meets or exceeds the API CF-2 and CF/SG Service classifications. BENEFITS • Excellent protection from deposits at all operating temperatures • Excellent bearing corrosion protection (EGR critical) • Excellent anti-wear properties • Excellent anti-foam properties • Excellent anti-rust properties • Excellent soot control TYPICAL PROPERTIES SAE Grade Viscosity: cSt @ 40°C cSt @ 100°C 30 91.05 10.91 Viscosity Index 105 Pour Point, °F -22 Specific Gravity @ 60°F 0.876 Gravity, API 30.03 “ Coolants Plus has distinguished themselves and left a positive mark on our company with their STARFIRE line of products. The STARFIRE product line has been a perfect fit for us, a top tier quality product but at a great price point. — Matt Berman, STARFIRE Distributor (NJ) ” STARFIRE Product Catalog 2016 16
HD30 Heavy Duty Motor Oil Starfire HD30 Heavy Duty Motor Oil is formulated with high viscosity index paraffinic base oils ...
Full Synthetic Gear Lubricants STARFIRE FULL SYNTHETIC GL-5 GEAR LUBRICANTS are multi-purpose lubricants designed for service in automotive and heavy duty applications. Starfire Full Synthetic GL-5 Gear Lubricants are formulated with synthetic base stocks and a sulfur-phosphorus extreme pressure additive package with friction modifier, which provides excellent thermal and oxidative stability, as well as anti-foam, anti-rust and anti-corrosion protection and have excellent load carrying capabilities. APPLICATIONS • API GL-5, GL-4 Service Designations as well as the MILPRF-2105D and MIL PRF 2105E and is suitable for use in limited slip differentials. • Mack GO-H & GO-J and Proposed PG-1/PG-2 Service Designations, Scania STO 110, Meritor -076N (75W90), and Meritor -076M (80W140) • For use when extreme pressure (EP) gear oils are required: In all heavy duty truck differentials - In all domestic automobile differentials and some manually shifted transmissions- In heavy duty manually shifted truck transmissions requiring API MT 1 performance In oil lubricated wheel bearings. BENEFITS • Provides excellent protection against wear under extreme pressure and high torque operation • High resistance to thermal breakdown • Helps prevent foaming, rust, and corrosion • Smooths and quiets operation 75W-90 75W-140 80w140 50w Viscosity: cSt @ 40°C cSt @ 100°C 94.5 16.7 168.2 27.1 182.1 26.5 103.50 17.4 Viscosity Index 192 199 181 185 Pour Point, 60°F -36 -47 -20 -44 Flash Point, (COC), °F 468 478 493 455 API Gravity @ 60°F 34.2 34.6 32.7 35.1 Specific Gravity, 60°F 0.854 0.852 0.862 0.849 TYPICAL TEST DATA 17 STARFIRE Product Catalog 2016
Full Synthetic Gear Lubricants STARFIRE FULL SYNTHETIC GL-5 GEAR LUBRICANTS are multi-purpose lubricants designed for serv...
Conventional Gear Lubricants STARFIRE GL-5 GEAR LUBRICANTS are multi-purpose lubricants designed for service in automotive and heavy duty applications. They are formulated with refined paraffinic base stocks and a sulfur-phosphorus extreme pressure additive package, which provides excellent thermal and oxidative stability, as well as anti-foam, antirust and anti-corrosion protection, and has excellent load carrying capabilities. Note: These products are not approved for Eaton Roadranger and ArvinMeritor Extended Warranties. APPLICATIONS • STARFIRE GL-5 Gear Lubricant meets the API GL-5, GL-4 Service Designations as well as the MIL-L-2105D and MIL Prf 2105E and is suitable for use in limited slip differentials • STARFIRE GL-5 Gear Lubricant is also suitable for use in Mack GO-H & GO-J and Proposed PG-1/PG-2 Service Designations, Scania STO 110, Meritor -076D (80W90), and Meritor -076A (85W140), MAN 342 M2 (160,000 km), and MB 235.80 • STARFIRE GL-5 Gear Lubricant meets API MT 1. For use when extreme pressure (EP) gear oils are required: In all heavy duty truck differentials - In all domestic automobile differentials and some manually shifted transmissions - in heavy duty manually shifted truck transmissions requiring API MT 1 performance– In oil-lubricated wheel bearings TYPICAL TEST DATA Viscosity: cSt @ 40°C cSt @ 100°C 80W-90 85W140 174 18.2 462 29.4 Viscosity Index 116 91 Flash Point, COC, C° (F°) 218 (424) 218 (424) Density, lbs/gal at 60°F 7.47 7.58 Gravity, API, 60°F 26.3 24 GL-1 SAE 90 STARFIRE GL-1 SAE 90 is manufactured with high quality base stocks to provide outstanding oxidation stability for long service life. This oil is inhibited against foaming and does not contribute to corrosion or wear of yellow metals, such as brass or bronze. APPLICATIONS STARFIRE GL-1 SAE 90 is designed for use in manual transmissions and transfer cases in on-highway trucks and off-highway equipment, which require an API GL-1 gear lubricant. It is also suitable for use in industrial gear oil applications that call for a straight mineral oil in the SAE 50 engine oil viscosity weight range. BENEFITS • Long service life • Non-foaming • Non-corrosive TYPICAL PROPERTIES SAE Grade Viscosity: cSt @ 40°C cSt @ 100°C (The SAE 50 engine oil viscosity grade is approximately equal to the SAE 90 gear oil viscosity grade). 90 97.14 16.42 Viscosity Index 184 Flash Point, ºF 392 Pour Point, ºC (ºF) -42 (-43) Density @ 60 ºF 7.23 Color 1.0 STARFIRE Product Catalog 2016 18
Conventional Gear Lubricants STARFIRE GL-5 GEAR LUBRICANTS are multi-purpose lubricants designed for service in automotive...
Non-Detergent Motor Oils STARFIRE NON-DETERGENT (ND) MOTOR OILS are manufactured using highly refined base oils for increased lubrication and wear protection in operating conditions which do not require a detergent motor oil. Starfire NonDetergent Motor Oils are recommended for light engines that call for a non-additive motor oil, compressors, circulating oils and low pressure hydraulic systems. Starfire ND Motor Oils satisfy API SA performance. CAUTION: This oil is rated API SA. It contains no additives. It is not suitable for use in most gasoline-powered automotive engines built after 1930. Use in modern engines may cause unsatisfactory engine performance or equipment harm. APPLICATIONS • Light engines calling for non-additive motor oil • Compressors • Circulating Oil • Low pressure hydraulic systems BENEFITS • Highly refined base stocks provide superior lubrication • Superior anti-foam control • Wide range of applications VISCOSITY GRADE SAE 10 SAE 20 SAE 30 SAE 40 Viscosity: cSt @ 40°C cSt @ 100°C 24.71 4.64 42 6.08 143.8 10.98 145.7 15.31 Viscosity Index 103 85 38 48 Flash Point ºF 399 410 429 437 Specific Gravity @ 60ºF (15.6ºC) 0.8629 0.8823 0.9222 0.9173 Gravity, °API 32.48 28.88 21.94 22.76 “ We want to thank all the folks with STARFIRE for the outstanding quality and service they provide us on a regular basis. ” — Todd Hayes, STARFIRE Distributor (AL) 19 STARFIRE Product Catalog 2016
Non-Detergent Motor Oils STARFIRE NON-DETERGENT  ND  MOTOR OILS are manufactured using highly refined base oils for increa...
AW Hydraulic Oils STARFIRE AW HYDRAULIC OILS are high performance hydraulic fluids formulated from select base stocks and advanced additive technology to deliver ultimate equipment protection and extended operating life. STARFIRE AW Hydraulic Oils contain active anti-wear agents, anti-oxidation, anti-corrosion, anti-rust and anti-foam additive components. APPLICATIONS Recommended for hydraulic pumps and hydraulic and highpressure circulating systems requiring: • Parker Hannifin (Denision) HF-O, HF-1, HF-2, & T6H2OC • Eaton Vickers 35VQ25A Pump, M-2950-S, & I-286-S • Cincinnati Milacron P-68, P-69, & P-70 or DIN 51524-2 BENEFITS • Formulated with premium base stocks for added resistance to thermal breakdown • Outstanding wear protection • Excellent resistance to system rust and oil oxidation • Maintains excellent water separating properties • Excellent foam control and air release deliver consistent system operation ISO GRADE 32 46 68 Viscosity: cSt @ 40°C cSt @ 100°C 31.8 5.5 45.9 6.9 68.0 7.7 95 95 95 Pour Point, °C (°F) -32 (-25) -30 (-22) -29 (-20) Flash Point, °C (°F) 200 (392) 200 (392) 210 (410) 29.0 28.5 28.0 >3000 >3000 >3000 7.2 7.2 7.2 Viscosity Index Gravity, API Oxidation Hrs, ASTM D 943 Lbs./Gallon R&O Oil STARFIRE R&O OIL is a high quality hydraulic oil developed as a general purpose rust, corrosion, and oxidation inhibited oil. It can be used for any application not requiring anti-wear or extreme pressure protection. This oil is formulated with premium quality, refined mid-range viscosity index base stocks and select additives to provide wear protection, water separation, and anti-foam properties. APPLICATIONS/BENEFITS • Excellent general purpose rust, corrosion, and oxidation inhibited hydraulic oil, when anti-wear or extreme pressure protection is not required. TYPICAL PROPERTIES Viscosity: cSt @ 40°C cSt @ 100°C Viscosity Index 32.0 4.85 44 Gravity, API 24.0 Color, ASTM <3.5 STARFIRE Product Catalog 2016 20
AW Hydraulic Oils STARFIRE AW HYDRAULIC OILS are high performance hydraulic fluids formulated from select base stocks and ...
Premium J20C Tractor Hydraulic Fluid STARFIRE PREMIUM J20C TRACTOR HYDRAULIC FLUID is formulated with highly refined Group II base stocks for added resistance to thermal breakdown and utilizes the combination of special friction modifiers and shear-stable viscosity modifiers to offer optimum performance levels. STARFIRE Premium J20C Tractor Hydraulic Fluid is recommended for use in all major OEM equipment. STARFIRE Premium J20C Tractor Hydraulic Fluid is designed for use in a variety of farm equipment, off-highway machinery, industrial tractors, final drives, power take-off units, wet brakes, power steering units, and hydraulic systems. It provides the unique combination of ultimate equipment protection and the convenience of using one fluid in place of two or more fluids while maintaining optimum component performance and durability. APPLICATIONS • Allison: C-4 • John Deere: Quatrol, J20C, J20A, J21A, Hy-Gard J14B/C, Type 303 Fluid • International Harvester: Hy-Tran, B-6 • AGCO (Massey Ferguson): M-1145, M-1143, M-1110, M-1127B, M-1129A, M-1135 Permatran III, M-1138, M-1141, White Q-1826, & Allis Chalmers Power Fluid 821 XL, Duetz-Allis Hyd Trans Fluid, 25743, 272843, & AGCO-Allis • J.I. Case: TFD (JIC-143/146), Hi-Vis (JIC-185), JIC-144/145, MS-1204, MS1205/1206/1207, MS-1210 (TCH) and B-6 • Case New Holland: MAT 3505, MAT 3525, MAT 3526, ESN M2C86A/B/C, M2C134-A/B/C/D, M2C41-B, M2C43, M2C53-A/B, M2C92-A • Vickers: I-2986-S, 104C, & M2950S, Denison UTTO, HF-0, HF-01, HF-02 • Kubota Universal Transdraulic Fluid: UTD & Super UTD • Sundstrand Hydrostatic Transmissions: JDQ-84 • Volvo: BM, VCE 1273.03 & WB-101 (wet brake) • Caterpillar: TO-2 & MTO (Multi-Application Tractor Oil) for older backhoe loader rear axles and Challenger tractors BENEFITS • Formulated with highly refined Group II base stocks for added resistance to thermal breakdown • Superior wear protection to protect critical components • Excellent frictional properties for smooth shifting • Excellent anti-shudder performance • Good seal compatibility • Protection against varnish and sludge formation • Superior thermal stability and oxidation resistance TYPICAL PROPERTIES Performance Level J20C Viscosity: cSt @ 40°C cSt @ 100°C 68.4 10.2 Viscosity Index 140 Pour Point, °C (°F) -40 (-40) Flash Point, °C (°F) 218 (424) API Gravity @ 60° F 29.7 Lbs. /gallon 7.2 21 STARFIRE Product Catalog 2016
Premium J20C Tractor Hydraulic Fluid STARFIRE PREMIUM J20C TRACTOR HYDRAULIC FLUID is formulated with highly refined Group...
Universal Tractor Hydraulic & Transmission Fluid STARFIRE UNIVERSAL TRACTOR HYDRAULIC & TRANSMISSION FLUID is formulated with highly refined base stocks for added resistance to thermal breakdown. It provides active anti-wear agents to protect critical transmission components and is field tested for proven performance. STARFIRE Universal Tractor Hydraulic & Transmission Fluid is designed for use in a variety of farm equipment, off-highway machinery, industrial tractors, final drives, power take-off units, wet brakes, power steering units, and hydraulic systems. It provides the convenience of using one fluid in place of two or more fluids while maintaining optimum component performance and durability. APPLICATIONS • John Deere: J14B C, J20A, J20, Type 303 (not recommended for J20C applications) • International Harvester: Hy-Tran • Massey Ferguson: M-1110 • Allis Chalmers: C-3 • J.I. Case: JIC-143 • Ford New Holland; ESN-M2C: 134B C • Allison: C-3 • Oliver • White: Q-1722 BENEFITS • Excellent wear protection • Smooth clutch and PTO performance • Excellent anti-shudder performance • Good seal compatibility • Protection against rust and oxidization • Multi-purpose lubricant applications TYPICAL PROPERTIES Performance Level Viscosity: cSt @ 40°C cSt @ 100°C Viscosity Index J20A (303) 51.5 7.0 90 API Gravity @ 60° F 24.4 ASTM Color L2.0 Lbs. /gallon 7.2 STARFIRE Product Catalog 2016 22
Universal Tractor Hydraulic   Transmission Fluid STARFIRE UNIVERSAL TRACTOR HYDRAULIC   TRANSMISSION FLUID is formulated w...
Conventional Green Antifreeze/Coolant STARFIRE CONVENTIONAL GREEN ANTIFREEZE/COOLANT is a premium, virgin, ethylene glycol-based product which meets or exceeds ASTM requirements for use in cars, light duty and heavy duty trucks. For heavy duty applications, the use of Supplemental Coolant Additives (SCAs) is required. Its low silicate formula contains inhibitors to prevent rust and corrosion for all cooling system metals, including aluminum. A 50/50 mixture of STARFIRE Conventional Green Antifreeze/Coolant and water provides freeze protection to -34°F and raises boiling point to +265°F when a 15 lb. pressure cap in good condition is used. STARFIRE Conventional Green Antifreeze/Coolant when used as directed: • Meets ASTM D 3306 • Meets ASTM D 4985 • Provides a low silicate formulation • May be added to any conventional antifreeze/coolant • Compatible with heavy duty diesel supplemental coolant additives (SCAs) • Helps prevent freeze-ups, overheating, and boil-overs • Protects aluminum and any other engine metals • Available in concentrate and 50/50 prediluted formulas CONVENTIONAL GREEN TYPICAL VALUES ASTM METHOD 1.5% by weight D1119 10.0 – 11.0 D1287 5.5 D1121 Speci­fic Gravity at 20/20°C (50% by Volume Solution) 1.064 D1122 Freezing Point (50% by Volume Solution) -34 D1177 Boiling Point (50% by Volume Solution) 227°F D1120 Flash Point (Tag Open Cup) (70% by Volume Solution) None Ash Content (50% by Volume Solution) pH 50% by Vol. Solution Reserve Alkalinity Foam Test 23 STARFIRE Product Catalog 2016 50mL/2.0 sec. D1881
Conventional Green Antifreeze Coolant STARFIRE CONVENTIONAL GREEN ANTIFREEZE COOLANT is a premium, virgin, ethylene glycol...
All Makes All Models Antifreeze/Coolant STARFIRE ALL MAKES ALL MODELS ANTIFREEZE/COOLANT is a premium, virgin, ethylene glycol-based product that is recommended, compatible, and formulated for use with ANY antifreeze/coolant in ANY vehicle with aluminum and other engine metals. This formula has a concentrated blend of premium long-lasting inhibitors, utilizing Organic Acid Technology (OAT) to provide extended life protection for cars and light duty trucks up to 5 years or 150,000 miles, when added to any extended life coolant. STARFIRE All Makes All Models Antifreeze/Coolant when used as directed: • May be added to the antifreeze/coolant of ANY make and model of automobile and light duty truck on the road, foreign or domestic • May be added to ANY color antifreeze/coolant • Utilizes Organic Acid Inhibitor Technology (OAT) • Protection up to 5 yearS/150,000 miles • Helps prevent freeze-ups, overheating, and boil-overs • Protects aluminum and ANY other engine metals • Available in concentrate and 50/50 prediluted formulas ALL MAKES ALL MODELS TYPICAL VALUES ASTM METHOD Ash Content (50% by Volume Solution) 0.6% by weight D1119 8.7 D1287 1 D1121 Speci­fic Gravity at 20/20°C (50% by Volume Solution) 1.0687 D1122 Freezing Point (50% by Volume Solution) -34 D1177 226°F D1120 pH 50% by Vol. Solution Reserve Alkalinity Boiling Point (50% by Volume Solution) Flash Point (Tag Open Cup) (70% by Volume Solution) Foam Test Color None 50mL/1.0 sec. D1881 Yellow STARFIRE Product Catalog 2016 24
All Makes All Models Antifreeze Coolant STARFIRE ALL MAKES ALL MODELS ANTIFREEZE COOLANT is a premium, virgin, ethylene gl...
Purecool Extended Life Antifreeze/Coolant STARFIRE PURECOOL EXTENDED LIFE ANTIFREEZE/COOLANT is a premium, virgin, ethylene glycol-based product that may be used in all GM® vehicles that require DEX-COOL® coolant, as well as other cars and light duty trucks with aluminum radiators. STARFIRE Purecool Extended Life Antifreeze/Coolant when used as directed: • Meets GM6277M, ASTM D 3306 and ASTM D 4985 • May be added to conventional antifreeze/coolant • Protects aluminum and ANY other engine metals • Meets GM and Ford performance specifications • DEX-COOL® is a registered trademark of GM Corporation • Available in concentrate and 50/50 prediluted formulas PURECOOL TYPICAL VALUES ASTM METHOD 1.5% by weight D1119 10.0 – 11.0 D1287 2.4 D1121 Speci­fic Gravity at 20/20°C (50% by Volume Solution) 1.064 D1122 Freezing Point (50% by Volume Solution) -34 D1177 Boiling Point (50% by Volume Solution) 227°F D1120 Flash Point (Tag Open Cup) (70% by Volume Solution) None Ash Content (50% by Volume Solution) pH 50% by Vol. Solution Reserve Alkalinity Foam Test Color 25 STARFIRE Product Catalog 2016 50mL/2.0 sec. Orange D1881
Purecool Extended Life Antifreeze Coolant STARFIRE PURECOOL EXTENDED LIFE ANTIFREEZE COOLANT is a premium, virgin, ethylen...
Purefleet SCA Precharged Antifreeze/Coolant STARFIRE PUREFLEET SCA PRECHARGED ANTIFREEZE/COOLANT is a premium, virgin, ethylene glycol-based heavy duty product that is designed for use in ANY diesel-powered truck, farm, off-road, marine or gasoline engine with aluminum and other engine metals. A 50/50 mixture of STARFIRE Antifreeze/Coolant and water provides freeze protection to -34˚F and raises boiling point to +265˚F when a 15 lb. pressure cap in good condition is used. STARFIRE Purefleet SCA Precharged Antifreeze/Coolant is designed for use in all heavy duty cooling system applications, including truck, farm, off-road and/or marine engine. STARFIRE Purefleet SCA Precharged Antifreeze/Coolant when used as directed: • Meets ASTM D 3306, D4985, ASTM D 6210 and TMC RP-329 • Provides a low silicate, phosphate-free formulation for long-lasting inhibition and corrosion protection • May be added to the antifreeze/coolant of ANY heavy duty application for any truck, farm, off-road and/or marine engine • May be added to the antifreeze/coolant of ANY make and model of heavy duty engine on the road, foreign or domestic • May be added to ANY conventional heavy duty antifreeze/ coolant* (color may change, but performance will not be affected) • Available in concentrate and 50/50 prediluted formulas *Provides extended life protection and is compatible with other ELC and conventional heavy duty coolants (users must continue to add Extender or other supplemental coolant additive “SCA”based on treat rates recommended by the engine manufacturer. Dilution with conventional coolants will reduce extended life benefits). PUREFLEET HEAVY DUTY ELC TYPICAL VALUES ASTM METHOD 0.3% max. D1119 10.4 D1287 Speci­fic Gravity at 20/20°C (50% by Volume Solution) 1.0714 D1122 Freezing Point (50% by Volume Solution) -34 D1177 Boiling Point (50% by Volume Solution) 227°F D1120 Flash Point (Tag Open Cup) (70% by Volume Solution) None Ash Content (50% by Volume Solution) pH 50% by Vol. Solution Foam Test Color 65mL/2.0 sec. “ STARFIRE products performance meets or exceeds all the major brands at a price point that adds profit to your bottom line. ” — Ray Wood, STARFIRE Distributor (OH) D1881 Fuchsia STARFIRE Product Catalog 2016 26
Purefleet SCA Precharged Antifreeze Coolant STARFIRE PUREFLEET SCA PRECHARGED ANTIFREEZE COOLANT is a premium, virgin, eth...
Purefleet Heavy Duty ELC Antifreeze/Coolant STARFIRE PUREFLEET HEAVY DUTY ELC ANTIFREEZE/COOLANT is a premium, virgin, ethylene glycol-based heavy duty product that is designed for use in ANY diesel-powered truck, farm, off-road, marine or gasoline engine with aluminum and other engine metals. A 50/50 mixture of STARFIRE Antifreeze/Coolant and water provides freeze protection to -34˚F and raises boiling point to +265˚F when a 15 lb. pressure cap in good condition is used. STARFIRE Purefleet Heavy Duty ELC Antifreeze/Coolant is designed for use in all heavy duty cooling system applications, including truck, farm, off-road and/or marine engine. It provides extended life protection up to 300,000 miles or 6,000 hours, when flushed and filled according to directions. STARFIRE Purefleet Heavy Duty ELC Antifreeze/Coolant when used as directed: • Meets ASTM D 3306, D4985, ASTM D 6210 and TMC RP-329 • Provides a silicate, phosphate and borate-free formulation for long-lasting inhibition and corrosion protection • Protects aluminum and ANY other engine metals • May be added to the antifreeze/coolant of ANY heavy duty application for any truck, farm, off-road and/or marine engine • May be added to the antifreeze/coolant of ANY make and model of automobile and light duty truck on the road, foreign or domestic • May be added to ANY color antifreeze/coolant (color may change, but performance will not be affected) • Available in concentrate and 50/50 prediluted formulas PUREFLEET HEAVY DUTY ELC TYPICAL VALUES ASTM METHOD Ash Content (50% by Volume Solution) 0.071% by weight D1119 pH 50% by Vol. Solution 8.7 D1287 Reserve Alkalinity 3.6 D1121 Speci­fic Gravity at 20/20°C (50% by Volume Solution) 1.0714 D1122 Freezing Point (50% by Volume Solution) -34 D1177 Boiling Point (50% by Volume Solution) 226°F D1120 Flash Point (Tag Open Cup) (70% by Volume Solution) None Foam Test Color 27 STARFIRE Product Catalog 2016 30mL/1.0 sec. Red D1881
Purefleet Heavy Duty ELC Antifreeze Coolant STARFIRE PUREFLEET HEAVY DUTY ELC ANTIFREEZE COOLANT is a premium, virgin, eth...
Purefleet EXTREME Heavy Duty ELC Antifreeze/Coolant STARFIRE PUREFLEET EXTREME HEAVY DUTY ELC ANTIFREEZE/COOLANT is a premium, virgin, ethylene glycolbased heavy duty antifreeze/coolant that contains a proprietary poly-organic/multi-organic acid technology inhibitor system that does not contain any phosphate, silicate, borate, nitrate or nitrite. It provides total cooling system protection for 600,000 on-road miles without the use of additive- containing coolant filters or supplemental coolant additives (SCAs). STARFIRE Purefleet EXTREME Heavy Duty ELC Antifreeze/Coolant is designed for use in all heavy duty cooling system applications, including truck, farm, off-road and/or marine engine. It provides extended life protection up to 600,000 miles when flushed and filled according to directions. STARFIRE Purefleet EXTREME Heavy Duty ELC Antifreeze/Coolant when used as directed: • Meets ASTM D 3306, ASTM D 4985, ASTM D 6210 and TMC RP-329/330 • Is compatible with all types of coolant technologies, including conventional inorganic acid salt formulations, straight organic acid (OAT) formulations, hybrid organic acid formulations (HOAT), nitrited HOAT formulations (NOAT) and other poly-organic acid formulations • Does NOT contain any phosphate, silicate, borate, nitrate or nitrite • Provides up to 600,000 miles of total cooling system protection • Is suitable for passenger cars, vans, SUVs, light trucks, heavy duty fleet vehicles and many off-road applications such as stationary engine cooling systems • Will provide superior corrosion protection for all cooling system metals, including aluminum, steel, cast iron, copper, brass and solder • Available in concentrate and 50/50 prediluted formulas Meets the following OEM Specifications: GM 6277M Ford ESE M97B44-A Ford WSE M97B44-B Ford WSS M97B44-D Ford WSS-M97B54-A Ford WSS-M97B44-E1/E2 Chrysler MS9769 John Deere H-5, H-24, A-1 to C-1 MTU MTL5048, MTL 5049 Toyota Porsche TL-774D Mitsubishi Honda HES D2009-75 Hyundai Mazda MEZ MW 121D Suzuki 0F02 Isuzu VW TL774F (G12), light violet VW G12 BMW Mercedes Blatt 325.0 & 325.2 Audi Saab 6901 599 Volvo 014 GS 17009 Caterpillar EC-1 Caterpillar ELC (with the addition of molybdate per specification) Cummins CES14603 (as found in service bulletin 3666132-02) Detroit Diesel 7SE298; DDC Powercool Plus and DDC Powercool Plus 6000 Navistar CEMS B-44 PUREFLEET EXTREME HD ELC Navistar/International B-1, Type III (CEMS B-1), with the addition of molybdate per specification PACCAR: Kenworth, Peterbilt TYPICAL VALUES ASTM METHOD 2.5% max D1119 7.5-9.0 D1287 None Specified D1121 1.110-1.145 D1122 Freezing Point (50% by Volume Solution) -34 D1177 Boiling Point (50% by Volume Solution) 226°F D1120 Flash Point (Tag Open Cup) (70% by Volume Solution) None Ash Content (50% by Volume Solution) pH 50% by Vol. Solution Reserve Alkalinity Speci­fic Gravity at 20/20°C (50% by Volume Solution) Foam Test Color 150mL/5.0 sec. max. D1881 Yellow STARFIRE Product Catalog 2016 28
Purefleet EXTREME Heavy Duty ELC Antifreeze Coolant STARFIRE PUREFLEET EXTREME HEAVY DUTY ELC ANTIFREEZE COOLANT is a prem...
Brake Fluid STARFIRE BRAKE FLUIDS are glycol-based fluids formulated to give optimum performance, longer service and prevent corrosion in brake systems. STARFIRE Brake Fluids meet or exceed the high standards of performance and safety for DOT 3 and DOT 4 fluids. APPLICATIONS • For all disc and drum brake systems, including ABS, in which a DOT 3 or DOT 4 fluid is recommended • Complies with Federal Motor Vehicle Safety Standard (FMVSS) No. 516.116 • Surpasses SAE Spec. J1703 (DOT 3), SAE Spec. J1704 and ISO 4925 (DOT 4) • Minimum wet boiling point 284°F (140°C) TYPICAL PROPERTIES DOT 3 DOT 4 ERBP 249 °C 480 °F 266 °C 510 °F Wet ERBP 157 °C 314 °F 166 °C 330 °F 1150 1100 Viscosity: cSt @ -40 °C Power Steering Fluid STARFIRE POWER STEERING FLUID is a premium formulation using high quality lubricating base stocks and select additives. It provides optimum protection in power steering systems of both foreign and domestic automobiles. It controls seal swelling and protects pump parts against wear while providing the proper friction coefficient for proper system operation. APPLICATIONS • STARFIRE Power Steering Fluid is suitable for use in most passenger car and light truck applications • STARFIRE Power Steering Fluid is NOT recommended for systems where special fluids are specified, e.g., SAAB, Honda, Mercedes Benz, etc. • Always check your owner’s manual when choosing a power steering fluid TYPICAL PROPERTIES Viscosity: cSt @ 40°C cSt @ 100°C Viscosity Index Brookfield @ -40ºC 32.25 6.25 150 22000 cP Flash Point (PMCC), ºC >160 Pour Point, ºC -48 Density, lbs/gal @60ºF 7.44 Appearance/Color 29 STARFIRE Product Catalog 2016 Bright and Clear/ L1.5
Brake Fluid STARFIRE BRAKE FLUIDS are glycol-based fluids formulated to give optimum performance, longer service and  prev...
Rv & Marine Antifreeze (-50°F) STARFIRE RV & MARINE ANTIFREEZE (-50°F) provides burst protection in potable water systems down to -50°F. STARFIRE RV & Marine Antifreeze is a specially permitted formula of denatured ethyl alcohol and propylene glycol. APPLICATIONS STARFIRE RV & Marine Antifreeze (-50°F) is an economical alternative for the winterization of campers, RVs, boats and summer homes. BENEFITS • No mixing required • Burst protection down to -50°F • Non-toxic • Safe for fresh water systems • All ingredients are listed in the U.S. Federal Register (GRAS) Windshield Washer Fluid STARFIRE WINDSHIELD WASHER FLUID has been formulated to provide the additional freezing protection that water just cannot provide. STARFIRE Windshield Washer Fluid will protect to 20°F below zero (-20°F). STARFIRE Windshield Washer Fluid clears windshields of dirt, bug stains, frost and ice. BENEFITS • Keeps windshields clean and improves visibility • No mixing necessary • Freeze protection to -20°F • Harmless to car finishes Supertack™ Bar & Chain Oil STARFIRE SUPERTACK BAR & CHAIN OIL is a premium lubricant designed to prevent rusting and reduce wear and link breakage, thus extending bar and chain life. The SuperTack™ tacifier formula provides maximum resistance to dropping and throw-off, even at the highest speeds. Its high viscosity index make it an excellent choice for commercial bar and chain applications. APPLICATIONS • Commercial Logging Operations • Professional Tree Trimming Services • Professional Clearing Operations • Homeowners Seeking Premium Grade Protection TYPICAL PROPERTIES BENEFITS • Two viscosity grades provide excellent year-round protection and performance • SuperTack additive resists throw-off at highest speeds • Prevents rust and reduces wear and link breakage • Superior protection and performance for commercial and home applications SUMMER GRADE WINTER GRADE 43.2086 10.67 37.73 8.71 Viscosity Index >240 >220 Pour Point, °F -65 oF -70 oF >392 >392 0.8830 0.8826 Viscosity: cSt @ 40°C cSt @ 100°C Flash, (PMCC) °F Specific Gravity @ 60°F STARFIRE Product Catalog 2016 30
Rv   Marine Antifreeze  -50  F  STARFIRE RV   MARINE ANTIFREEZE  -50  F  provides burst protection in potable water system...
Blue Panther DEF BLUE PANTHER DEF is a mixture of 32.5% high purity urea and 67.5% deionized water that is used in Selective Catalytic Reduction (SCR) systems on diesel engines. DEF is the primary ingredient used to help convert diesel powered bus, car and truck NOx emissions to harmless nitrogen and water. BLUE PANTHER DEF is stable, colorless, non-flammable and non-toxic. BLUE PANTHER DEF conforms to the ISO 22241-1 specification for DEF, is API licensed and meets or exceeds all OEM specifications. BENEFITS • API licensed • Meets or exceeds all OEM specifications • Conforms to ISO 22241-1 specification for DEF HANDLING Use only dedicated DEF equipment when handling/ dispensing DEF and keep dispensing equipment clean and free from dirt or other contaminants DO NOT fill DEF into diesel fuel tank DO NOT fill diesel fuel into DEF tank DO NOT add water to DEF PHYSICAL PROPERTIES Boiling Point >212°F Crystallization Point 2°F Pounds/Gallons 9.09 Specific Gravity (Water -1) 1.09 Vapor Pressure (mm of Hg) N/A Vapor Density (Air -1) Water Solubility Appearance Odor Evaporation Rate 31 STARFIRE Product Catalog 2016 0_6 H2), >1 100% Colorless Clear Liquid None to Slight Ammonia <1
Blue Panther DEF BLUE PANTHER DEF is a mixture of 32.5  high purity urea and 67.5  deionized water that is used in Selecti...
Low VOC Brake/Parts Cleaner STARFIRE TEC-A BRAKE LOW VOC is a non-chlorinated formula that quickly and effectively removes grease, brake dust, brake fluids, oils and other contaminants from brake parts, lining and pads. Do not use on electrical motors or circuits and avoid contact with rubber and plastic. APPLICATIONS • ABS BENEFITS • Fast drying • Disc • Removes grease, oil, brake fluid and other contaminants from disc and drum brake components instantly • Drum • Brake cylinders • Leaves no residue • Brake drums • Brake linings • Cleans without disassembly • Brake shoes • Helps stop brake squeaking and can improve braking performance • Clutch discs • Non-chlorinated • Disc brake pads • Low VOC formula • Discs Safe for use on all brake systems, including springs & wedge brakes. Starting Fluid STARFIRE TEC-A-START STARTING FLUID is Professional grade engine starting fluid. It is a balanced formulation combining active, volatile solvents, upper cylinder lubricant and corrosion inhibitors, each designed to play a vital part in starting engines. APPLICATIONS • Cars • Trucks • Buses • Tractors BENEFITS • Ensures fast, economical starting of all diesel and gasoline engines. • Reduces starter motor and spark plug wear. • Motorbikes and motorcycles • Saves battery strain and engine wear during cold start. • Chain saws • Saves time and money. • Boats (in-board and out board) • Equipped with the 360° (upside - down) spray valve and extension tube for added convenience. • Go-carts • Stationary engines • Compressors • Diesel, gasoline and kerosene engines • 2-cycle and 4-cycle engines STARFIRE Product Catalog 2016 32
Low VOC Brake Parts Cleaner STARFIRE TEC-A BRAKE LOW VOC is a non-chlorinated formula that quickly and effectively removes...
Hi-Temp Red EP2 Grease STARFIRE HI-TEMP RED EP2 GREASE is recommended for most automotive and industrial applications, including trucks, automobiles, construction equipment and heavy duty industrial service. It is commonly recommended for wheel bearing, u-joints, chassis, fifth wheel, as well as heavy duty industrial ball, roller and sleeve bearing designs. Hi-Temp Red EP2 Grease is licensed with NLGI to meet NLGI GC/LB specifications for automotive wheel bearings and chassis lubrication. BENEFITS • High temperature capability • Excellent thermal and mechanical stability • Oxidation and rust resistance • Excellent water resistance • Good low temperature pumpability • Extreme pressure additive • Compatible with lithium or lithium complex greases • Excellent adhesion properties, tacky consistency TYPICAL PROPERTIES NLGI Grade 2 NLGI Classification GC/LB Worked Penetration 280 Dropping Point °F, Min 500 Four Ball Wear Scar Diameter, mm 0.55 Oil Separation, %, Max 5 Rust Protection Pass 1, 1, 1 Four Ball Weld Point, Kg 315 Load Wear Index 55 Water Washout @ 80°C, % <5.0 Wheel Bearing Life Test, Hrs 100+ Timken OK Load, lbs. 45 Wheel Bearing Leakage, 20 Hr, 160°C, 100 rp Base Oil Viscosity @ 40°C, cSt 7 140 Multi-Purpose EP2 Grease STARFIRE Multi-Purpose EP2 is recommended for moderate speed and temperature applications. It is suitable for bearing temperatures up to 121°C (250°F) and down to –12.2°C (10°F). STARFIRE Multi-Purpose EP2 grease provides excellent lubrication performance for automotive chassis, electric motor bearings, universal joints, fifth wheels and general purpose bearing lubrication. TYPICAL PROPERTIES NLGI Grade 2 Dropping Point °F, Min. 365 Worked Penetration @ 77°F, 60 Strokes 295 Base Oil Viscosity @ 40°C, cSt 140 Color 29 33 STARFIRE Product Catalog 2016 Amber
Hi-Temp Red EP2 Grease STARFIRE HI-TEMP RED EP2 GREASE is recommended for most automotive and industrial applications, inc...
3% MOLY EP2 Grease STARFIRE 3% MOLY EP2 GREASE is a high quality multipurpose grease for construction, industrial and transportation service. It has a lithium complex thickener for compatibility with a wide range of industrial greases. STARFIRE 3% MOLY EP2 GREASE offers anti-wear protection, strong extreme pressure properties, rust and oxidation inhibitors and tackifiers. It is fortified with 3% Molybdenum Disulfide for additional EP protection. It offers excellent mechanical stability, load-carrying capability and water and corrosion resistance. STARFIRE 3% MOLY EP2 GREASE is also recommended for high temperature service. APPLICATIONS STARFIRE 3% MOLY EP2 GREASE can be used in any ball or roller bearing application. It is specifically designed for use in heavy duty construction equipment where high shock loads and water washout are required. NLGI GC-LB performance guarantees excellent wheel bearing performance. Molybdenum Disulfide provides EP protection when the bulk grease has dissipated. This protection is vital for reciprocating bearings such as backhoe knuckle bushings and universal joints. FEATURES • Excellent Extreme Pressure Properties • High Shock Load Resistance • Excellent Rust and Corrosion Protection • Outstanding Oxidation Stability SPECIFICATIONS • Caterpillar Multipurpose Grease with 3% Moly TYPICAL PROPERTIES NLGI Grade 2 Penetration, 60 Strokes, 25 C. DMM 280 Penetration, 1000 Strokes, 25 C. DMM 290 Penetration, 10,000 Cycles 305 Dropping Point C. (F.) 260 (500) Timken Ok Load Lbs. 60 Four Ball Wear Scar, 40 KGF, 1 Hr, 75 C., 1200 RPM. MM 0.48 Four Ball EP Weld Point, KGF 400 Four Ball Load Wear Index, KGF 54 DI Rust Protection, 48 Hr, 52 C. Pass Water Washout 1 Hr, 79 C. 3.5 Water Spray Resistance, 5 Min., 100 F. 40 PSI, % 30 High Temperature Life, 1000 RPM, 160 C., Hr. 120 Base Oil Viscosity At 40 C, CSt. 161 Color Grey 29 STARFIRE Product Catalog 2016 34
3  MOLY EP2 Grease STARFIRE 3  MOLY EP2 GREASE is a high quality multipurpose grease for construction, industrial and  tra...
TC-W3® Premium 2-Cycle Engine Oil STARFIRE TC-W3® PREMIUM 2-CYCLE OIL is a premium, high quality motor oil formulated for use in outboard motors, motorcycles, snowmobiles, chain saws, garden equipment and other fuel lubricated or fuel injected 2-Cycle engines. It is formulated to prevent ring sticking, reduce spark plug fouling and keeps engine clean. Follow engine manufactures’ recommendations to determining correct oil/fuel ratio. Add oil to fuel, mix thoroughly. BENEFITS • Multi-application usage • Ideal for oil injected and fuel/oil lubricated engines • Meets API TC and JASCO FB, TC-W3® specifications • Licensed by National Marin Manufacturers Association (NMMA). TYPICAL PROPERTIES Viscosity: cSt @ 40°C cSt @ 100°C 30.07 6.15 Viscosity Index 159 Pour Point, °F -53 Gravity, °API 32.2 Specific Gravity @ 60°F (15.6°C) TBN, mgKOH/g 0.8644 10 STARFIRE Product Catalog 2016 35
TC-W3   Premium 2-Cycle Engine Oil STARFIRE TC-W3   PREMIUM 2-CYCLE OIL is a premium, high quality motor oil formulated fo...