Hydrant Booster Assemblies

Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
HYDRANT BOOSTER
ASSEMBLIES
CATALOGUE
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
Contents
General Informaon 3
100nb ‘H’ Paern Hydrant Sucon Booster Assembly inc Storz 4
150nb ‘H’ Paern Hydrant Sucon Booster Assembly inc Storz 5
100nb ‘H’ Paern Hydrant Sucon Booster Assembly c/w Gear operated Valves 6
100nb Hydrant Booster Assembly c/w Gear operated Valves and Tank Booster 7
100nb Hydrant Booster Assembly c/w Double Detector Valve, Tank Booster and Gear operated Valves 8
150nb ‘H’ Paern Hydrant Sucon Booster Assembly c/w double detector check valve 9
100nb ‘N’ Paern Hydrant Sucon Booster Assembly c/w double detector check valve 10
100nb ‘S’ Paern Hydrant Sucon Booster Assembly c/w double detector check valve 10
150nb ‘S’ Paern Hydrant Sucon Booster Assembly c/w double detector check valve 12
100NB ‘INLINE’ Hydrant Sucon Booster Assembly c/w double detector check valve and Gear op valves 13
Hydrant Riser 14
Booster Cabinet 100nb 15
Booster Cabinet 150nb 16
General Purpose Cabinet Ordering Sheet 17
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
Fire Hydrant Booster Assemblies
Manufactured in house
Booster assemblies are manufactured to conform to the requirement of
AS2419
Couplings, Fings and valves are UL/FM approved
All fabricated components are Hot Dipped Galvanised as required in AS2419
Pressure tested to 2100kpa
Can be supplied as individual components or assembled.
Hydrant Booster Cabinets are available for all booster sizes and
conguraons.
Available in 100nb and 150nb.
Please nominate connecon type, LH or RH entry, Valves (Buery or Gate)
required to suit relevant authority requirements.
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
100nb ‘H’ Paern Hydrant Sucon Booster Assembly
Inc Storz
* Centre to centre measurement based on standard Mech valves.
Centre to centre measurement may change depending on brand of valves used in assembly
Part No : HBAU100RG
*Approx 678mm C/C
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
150nb ‘H’ Paern Hydrant Sucon Booster Assembly
Inc Storz
Part No : HBAU150RG
* Centre to centre measurement based on standard Mech valves.
Centre to centre measurement may change depending on brand of valves used in assembly
*APPROX 1002mm C/C
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
100nb ‘H’ Paern Hydrant Sucon Booster Assembly
C/W Gear operated Valves
Part No : HBDDCVA100G
* Centre to centre measurement based on standard Ames and Mech valves.
Centre to centre measurement may change depending on brand of valves used in assembly
*1518 Approx C/C
* End to center measurement based on standard Mech valves. (End to centre measurement may
change depending on brand of valves used in assembly)
Booster assemblies are manufactured to conform to the requirement of AS2419
Couplings, Fings and valves are UL/FM approved
All fabricated components are Hot Dipped Galvanised as required in AS2419
Part No : HBDDCVA100GTB
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
100nb Hydrant Booster Assembly
c/w Gear Operated Valves and Tank Booster
*Approx 1518mm E/C
100nb Hydrant Booster Assembly
c/w Double Detector Check Valve, Tank Booster and Gear Op Valves
* End to Center measurement based on standard Mech valves. (End to center measurement may
change depending on brand of valves used in assembly)
Booster assemblies are manufactured to conform to the requirement of AS2419
Couplings, Fings and valves are UL/FM approved
All fabricated components are Hot Dipped Galvanised as required in AS2419
Part No : HBDDCVA100GTBB
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
*1518 Approx E/C
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
150nb ‘H’ Paern Hydrant Sucon Booster Assembly
C/W Double detector Check Valve
Part No : HBDDCVA150
* End to center measurement based on standard Ames and Mech valves.
End to center measurement may change depending on brand of valves used in assembly
Butterfly Valve Measurements by brand:
Approx 2185 E/C
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
100nb ‘N’ Paern Hydrant Sucon Booster Assembly
C/W Double detector Check Valve
* Centre to centre measurement based on standard Ames and Mech valves.
Centre to centre measurement may change depending on brand of valves used in assembly
Buery Valve Measurements by brand:
Part No : HBDDCVA100NPAT
*Approx 728mm C/C
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
100nb ‘S’ Paern Hydrant Sucon Booster Assembly
C/W Double detector Check Valve
* Centre to centre measurement based on standard Ames and Mech valves.
Centre to centre measurement may change depending on brand of valves used in assembly
Buery Valve Measurements by brand:
Part No : HBDDCVA100SPAT
* Approx 930mm C/C
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
150nb ‘S’ Paern Hydrant Sucon Booster Assembly
C/W Double detector Check Valve
Part No : HBDDCVA150SPAT
* Centre to centre measurement based on standard Ames and Mech valves.
Centre to centre measurement may change depending on brand of valves used in assembly
Buery Valve Measurements by brand:
2000mm
* Approx 1430mm C/C
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
Inline Suction Booster Assembly C/W Double
detector Check Valve
Part No : INLINE
* End to centre measurement based on standard Ames and Mech valves.
End to center measurement may change depending on brand of valves used in assembly
Butterfly Valve Measurements by brand:
*Approx 990mm E/C
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
Technical Data
Height—to centre of valve
Min Height—750mm (+/- 50mm)
Max height—1200mm (+/- 50mm)
Drawing is for illustraon purposes only and is not to scale.
Hydrant Riser
Features:
100nb Galvanised Pipe
Bullhead Tee 100 x 80 x 80
2 x Hydrant Valves c/w Forged Stortz Adaptors
& Plasc Stortz Cap
Opons
Aluminum Hydrant Valve Caps
Denso Wrapping
Main Connecon—Flange Adaptor or CU/RG
Adaptor
Various sizes available upon request.
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
Booster Cabinet 100nb
For 100nb DDC & 150nb H-PATTERN
Dimensions: 1600h x 2100w x 750d inc 003 Lock.
Note: Wording on cabinet to be conrmed prior to ordering.
Part No : CABBS100
Firequip Pty Ltd
2 Pike St. Rydalmere, NSW, 2116
Phone: 02 9638 1300
Email: sales@requip.com.au
Web: www.requip.com.au
Booster Cabinet 150nb
3 Door 3 Point Locking System
Dimensions: 1600h x 3000w x 750d on 50mm Legs inc 003 Lock.
Single Door on Le Side.
Note: Wording on cabinet to be conrmed prior to ordering.
Part No : CABBS150
GENERAL PURPOSE CABINET ORDERING SHEET
THIS SHEET MUST BE COMPLETED FOR ALL NON-STOCK ITEM CABINETS
DATE ORDERED:
CUSTOMER NAME:
CONTACT NAME:
PHONE NUMBER:
ORDER NUMBER:
CABINET SIZE(mm)
H: W: D: QUANTITY:
CABINET MATERIAL: STANDARD OTHER:
FINISH/COLOUR: NO. OF DOORS:
HINGED: LEFT / RIGHT
LEGS? YES / NO LENGTH OF LEGS: (mm) BACK? YES / NO
BREAK
GLASS?
YES / NO
BOTTOM: YES / NO
WORDING ON CABINET:
WORDING COLOUR: OTHER INFORMATION:
DOOR CLOSE T - HANDLE YES / NO
TYPE: RECESSED HANDLE YES / NO
HASP & STAPLE YES / NO
003 LOCK YES / NO
3-POINT LOCKING YES / NO
INTERNAL USE ONLY:
ORDER TAKEN BY: DELIVERY DETAILS:
DELIVERY DKT NO:
CUSTOMER PICK UP?: YES / NO
SUPPLIER: DELIVERY COST:
PURCHASE O/NO: WHO PAYS: CUST / FQ
rm6/08 rev 2
2 Pike Street
Rydalmere NSW 2116
PH: 02 9638 1300
Fax: 02 9684 2427
Email: sales@firequip.com.au