simplebooklet thumbnail

Model # W4E
602 Fountain Parkway
Grand Prairie, TX 75050
800.847.8269
“Wildgame Innovations” and the “Button Logo are TM trademarks of Wildgame Innovations, LLC.
“Sport Responsible” , “Redux” and “Flextime” are TM trademarks of WGI Innovations, LTD.
User’s Manual
Infrared Digital Scouting Camera
Includes
Features
USB Cable 2 - Bungee Cords
User Manual
Camera UnitFlextime Player
Software
NOTE: Flextime Player Software is optional.
Flextime files can be played by using most
media players.
RESOLUTION
FLASH
FLASH RANGE
SENSOR
SENSOR RANGE
IMAGE FORMAT
MEMORY
USB
IMAGE RESOLUTION
POWER SUPPLY
AUXILIARY POWER
BATTERY LIFE
ONBOARD POWER
HOUSING
MOUNTING
REDUX
MAX: 4 MP
24 High Intensity Infrared LED’s
up to 60 feet
Passive Infrared Sensor (PIR) Motion and Heat
up to 60 feet
JPEG - Digital Still / AVI - Digital Video
up to 64GB SD Card (not included)
5-PIN Mini USB style - included
High (4MP)
Medium (2MP)
Low (1.3MP)
8 AA-Cell batteries (not included)
External power port
Estimated up to 3 months (in PIR mode)
Battery life may be reduced in Flextime mode
(depending on Flextime setting)
Built in battery to retain Time and Settings
Weather resistant with rubber gaskets
2 Bungee cords - included
Technology to reduce motion blur during
transition time
page 1
page 2
Includes
Features
USB Cable 2 - Bungee Cords
User Manual
Camera UnitFlextime Player
Software
NOTE: Flextime Player Software is optional.
Flextime files can be played by using most
media players.
RESOLUTION
FLASH
FLASH RANGE
SENSOR
SENSOR RANGE
IMAGE FORMAT
MEMORY
USB
IMAGE RESOLUTION
POWER SUPPLY
AUXILIARY POWER
BATTERY LIFE
ONBOARD POWER
HOUSING
MOUNTING
REDUX
MAX: 4 MP
24 High Intensity Infrared LED’s
up to 60 feet
Passive Infrared Sensor (PIR) Motion and Heat
up to 60 feet
JPEG - Digital Still / AVI - Digital Video
up to 64GB SD Card (not included)
5-PIN Mini USB style - included
High (4MP)
Medium (2MP)
Low (1.3MP)
8 AA-Cell batteries (not included)
External power port
Estimated up to 3 months (in PIR mode)
Battery life may be reduced in Flextime mode
(depending on Flextime setting)
Built in battery to retain Time and Settings
Weather resistant with rubber gaskets
2 Bungee cords - included
Technology to reduce motion blur during
transition time
page 1
page 2
Installing Batteries
Open the door at the bottom of the camera by
unlatching the locking tabs.
1.
With the camera facing open, open the battery
compartment cover by sliding the latch to the
left.
(Illustration A and B)
2.
With the bottom of the camera
towards you, Make sure to insert the
batteries into the camera with the
positive ends towards you where
marked positive and the negative ends
towards you where marked negative.
3.
Close battery compartment cover. To
latch the cover simply pull the latch
slightly to the left as you close the
battery compartment cover.
4.
Load SD memory card (up to 64GB not
included) into the SD card slot with the
connectors facing down.
5.
Illustration A
Illustration B
Open
TIPS:
Make sure the SD Card is unlocked (small
switch on the side of the SD Card) or the
camera LCD will read “LOCK”.
page 3
page 4
Installing Batteries
Open the door at the bottom of the camera by
unlatching the locking tabs.
1.
With the camera facing open, open the battery
compartment cover by sliding the latch to the
left.
(Illustration A and B)
2.
With the bottom of the camera
towards you, Make sure to insert the
batteries into the camera with the
positive ends towards you where
marked positive and the negative ends
towards you where marked negative.
3.
Close battery compartment cover. To
latch the cover simply pull the latch
slightly to the left as you close the
battery compartment cover.
4.
Load SD memory card (up to 64GB not
included) into the SD card slot with the
connectors facing down.
5.
Illustration A
Illustration B
Open
TIPS:
Make sure the SD Card is unlocked (small
switch on the side of the SD Card) or the
camera LCD will read “LOCK”.
page 3
page 4
Power Save
Power On
Setting Time
Test Mode
After 30 seconds without any buttons
being pushed, the LCD will turn off and
camera enters into Power Save or
Ready Mode.
1.
1.
Check the battery level icon to ensure
the batteries just installed contain the
proper charge level. If so, you are ok to
proceed with camera use.
2.
PIR LED Status Light: During the first
2 minutes of Ready Mode, the red light
will illuminate when a PIR event is
triggered. The green light will blink
for 2-3 seconds when photo is taken
during this first 2 minutes. After 2
minutes all indicator lights will turn
off until a button is pressed.
1.
LCD Ready Mode: The camera will
automatically enter Ready Mode if a
button is not pressed for greater than
30 seconds. The status lights will
illuminate for a total of 2 minutes.
2.
The LCD screen can be awakened by
pressing the Power button briefly.
Note: The LCD will not “wake up” when
camera is writing to memory.
2.
To turn the unit ON press and release
the power button.
1.
To change date and time, start by
pressing and release the center
navigation button to set the hour.
2.
Press the left or right navigation
button to go up or down in sequence.
3.
When the hour is set, repeat steps 1
and 2 to set the minutes.
POWER
POWER
page 5
page 6
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
NOTE: LCD cycle through camera
information. PIR picture number >
Flextime number > Remaining
pictures > Time
Power Save
Power On
Setting Time
Test Mode
After 30 seconds without any buttons
being pushed, the LCD will turn off and
camera enters into Power Save or
Ready Mode.
1.
1.
Check the battery level icon to ensure
the batteries just installed contain the
proper charge level. If so, you are ok to
proceed with camera use.
2.
PIR LED Status Light: During the first
2 minutes of Ready Mode, the red light
will illuminate when a PIR event is
triggered. The green light will blink
for 2-3 seconds when photo is taken
during this first 2 minutes. After 2
minutes all indicator lights will turn
off until a button is pressed.
1.
LCD Ready Mode: The camera will
automatically enter Ready Mode if a
button is not pressed for greater than
30 seconds. The status lights will
illuminate for a total of 2 minutes.
2.
The LCD screen can be awakened by
pressing the Power button briefly.
Note: The LCD will not “wake up” when
camera is writing to memory.
2.
To turn the unit ON press and release
the power button.
1.
To change date and time, start by
pressing and release the center
navigation button to set the hour.
2.
Press the left or right navigation
button to go up or down in sequence.
3.
When the hour is set, repeat steps 1
and 2 to set the minutes.
POWER
POWER
page 5
page 6
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
NOTE: LCD cycle through camera
information. PIR picture number >
Flextime number > Remaining
pictures > Time
Setting Date
Trigger Flextime
Location
1.
Press the center navigation button
after setting the minute to change the
Day.
2.
Press the left or right navigation
button to go up or down in sequence.
3.
When the DAY is set, repeat steps 1
and 2 to set the Month and Year.
1.
Press the center navigation button
while Location is selected. The first
character will be blinking.
1.
Press the center navigation button
while Trigger is selected. The
highlighted option will be blinking.
TRIGGER:
PIR MODE: Takes a photo or video only
when the PIR sensor is triggered.
FLEXTIME
(Time Lapse): Takes time lapse
images at set intervals during the key
movement periods of the day, depending
on your Flextime settings.
BOTH: Both PIR and Flextime are active.
The Interval setting is set by the Delay
Setting on the camera with a 1 minute
minimum Flextime delay. See chart on
the next page for Flextime options.
NOTE: Camera needs at least 48 hours
in the field to acclimate to the environ-
ment for Flextime to function properly.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
2.
Press the left or right navigation
button to go up or down in sequence.
Press the center navigation button
when the character shown is what you
want and move to the next character.
3.
Repeat steps 1 and 2 to set the rest of
the characters. Press the center
navigation button to skip spaces and
save the location name.
1.
Press the center navigation button
while Flextime is selected. The
highlighted option will be blinking.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
page 7
page 8
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Setting Date
Trigger Flextime
Location
1.
Press the center navigation button
after setting the minute to change the
Day.
2.
Press the left or right navigation
button to go up or down in sequence.
3.
When the DAY is set, repeat steps 1
and 2 to set the Month and Year.
1.
Press the center navigation button
while Location is selected. The first
character will be blinking.
1.
Press the center navigation button
while Trigger is selected. The
highlighted option will be blinking.
TRIGGER:
PIR MODE: Takes a photo or video only
when the PIR sensor is triggered.
FLEXTIME
(Time Lapse): Takes time lapse
images at set intervals during the key
movement periods of the day, depending
on your Flextime settings.
BOTH: Both PIR and Flextime are active.
The Interval setting is set by the Delay
Setting on the camera with a 1 minute
minimum Flextime delay. See chart on
the next page for Flextime options.
NOTE: Camera needs at least 48 hours
in the field to acclimate to the environ-
ment for Flextime to function properly.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
2.
Press the left or right navigation
button to go up or down in sequence.
Press the center navigation button
when the character shown is what you
want and move to the next character.
3.
Repeat steps 1 and 2 to set the rest of
the characters. Press the center
navigation button to skip spaces and
save the location name.
1.
Press the center navigation button
while Flextime is selected. The
highlighted option will be blinking.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
page 7
page 8
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
PIR Mode
1.
Press the center navigation button
while PIR Mode is selected. The
highlighted option will be blinking.
Flextime period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime period:
1. 15 min before Sunrise
to 15 min after Sunset
PIR MODE:
STILL: The camera takes still
photographs.
VIDEO: The camera takes 30
second videos.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
PIR Active
1.
Press the center navigation button
while PIR Active is selected. The
highlighted option will be blinking.
PIR ACTIVE:
24 HR: The PIR can be active at all
times.
DAY: The PIR can be active in
daylight hours only.
NIGHT: The PIR can be active in
nighttime hours only.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
page 9
page 10
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
1 HOUR
AFTER
SUNRISE
1 HOUR
BEFORE
SUNSET
15 MINUTES
BEFORE
SUNRISE
15 MINUTES
AFTER
SUNSET
FLEX
TIME
FLEX
TIME
FLEX
TIME
FLEX
TIME
PIR
INACTIVE
Camera is inactive before and after Flextime periods.
Flextime is active twice a day.
Flextime is active twice a day.
Flextime is active during daytime.
Camera is in PIR mode before and after Flextime periods.
Camera is in PIR mode before and after Flextime periods.
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
PIR
PIR
FLEXTIME
PIR PIR
P1
FLEXTIME selected
BOTH selected
P2
INTERVAL
Flextime + PIR period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime + PIR period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime + PIR period:
1. 15 min before Sunrise
to 15 min after Sunset
P1
P2
INTERVAL
1 HOUR
AFTER
SUNRISE
1 HOUR
BEFORE
SUNSET
15 MINUTES
BEFORE
SUNRISE
15 MINUTES
AFTER
SUNSET
FLEX
TIME
FLEX
TIME
FLEX
TIME
FLEX
TIME
PIR
PIR PIR
PIR PIRPIR
PIR
FLEXTIME & PIR
PIR PIR
Camera is inactive before and after Flextime + PIR periods. Flextime + PIR is active twice a day.
Camera is in PIR mode before and after Flextime + PIR periods. Flextime + PIR is active twice a day.
Camera is in PIR mode before and after Flextime + PIR periods. Flextime + PIR is active during daytime.
PIR Mode
1.
Press the center navigation button
while PIR Mode is selected. The
highlighted option will be blinking.
Flextime period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime period:
1. 15 min before Sunrise
to 15 min after Sunset
PIR MODE:
STILL: The camera takes still
photographs.
VIDEO: The camera takes 30
second videos.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
PIR Active
1.
Press the center navigation button
while PIR Active is selected. The
highlighted option will be blinking.
PIR ACTIVE:
24 HR: The PIR can be active at all
times.
DAY: The PIR can be active in
daylight hours only.
NIGHT: The PIR can be active in
nighttime hours only.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
page 9
page 10
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
1 HOUR
AFTER
SUNRISE
1 HOUR
BEFORE
SUNSET
15 MINUTES
BEFORE
SUNRISE
15 MINUTES
AFTER
SUNSET
FLEX
TIME
FLEX
TIME
FLEX
TIME
FLEX
TIME
PIR
INACTIVE
Camera is inactive before and after Flextime periods.
Flextime is active twice a day.
Flextime is active twice a day.
Flextime is active during daytime.
Camera is in PIR mode before and after Flextime periods.
Camera is in PIR mode before and after Flextime periods.
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
PIR
PIR
FLEXTIME
PIR PIR
P1
FLEXTIME selected
BOTH selected
P2
INTERVAL
Flextime + PIR period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime + PIR period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime + PIR period:
1. 15 min before Sunrise
to 15 min after Sunset
P1
P2
INTERVAL
1 HOUR
AFTER
SUNRISE
1 HOUR
BEFORE
SUNSET
15 MINUTES
BEFORE
SUNRISE
15 MINUTES
AFTER
SUNSET
FLEX
TIME
FLEX
TIME
FLEX
TIME
FLEX
TIME
PIR
PIR PIR
PIR PIRPIR
PIR
FLEXTIME & PIR
PIR PIR
Camera is inactive before and after Flextime + PIR periods. Flextime + PIR is active twice a day.
Camera is in PIR mode before and after Flextime + PIR periods. Flextime + PIR is active twice a day.
Camera is in PIR mode before and after Flextime + PIR periods. Flextime + PIR is active during daytime.
page 11
page 12
Picture
1.
Press the center navigation button
while Picture is selected. The
highlighted option will be blinking.
PICTURE:
REGULAR: Images taken will be in
regular angle or 4:3 aspect ratio.
WIDE: Images taken will be in wide
angle or 16:9 aspect ratio.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
Resolution
1.
Press the center navigation button
while Resolution is selected. The
highlighted option will be blinking.
RESOLUTION:
HI: Images will be at the highest
resolution but take up the most space.
MED: Images will be at medium
resolution and take up average space.
LO: Images will be at the lowest
resolution and take up the least space.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
Delay
1.
Press the center navigation button
while Delay is selected. The
highlighted option will be blinking.
DELAY: The time before the camera is
able to take another picture.
PIR Mode: minimum 15s
FLEXTIME Mode: minimum 1 minute
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
PIR Sensitivity
1.
Press the center navigation button
while PIR Sense is selected. The
highlighted option will be blinking.
PIR SENSE:
HI: The PIR detects the smallest
movement.
MED: (Default) The PIR detects
most common size movements.
LO: The PIR detects only larger
movements.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
page 11
page 12
Picture
1.
Press the center navigation button
while Picture is selected. The
highlighted option will be blinking.
PICTURE:
REGULAR: Images taken will be in
regular angle or 4:3 aspect ratio.
WIDE: Images taken will be in wide
angle or 16:9 aspect ratio.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
Resolution
1.
Press the center navigation button
while Resolution is selected. The
highlighted option will be blinking.
RESOLUTION:
HI: Images will be at the highest
resolution but take up the most space.
MED: Images will be at medium
resolution and take up average space.
LO: Images will be at the lowest
resolution and take up the least space.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
Delay
1.
Press the center navigation button
while Delay is selected. The
highlighted option will be blinking.
DELAY: The time before the camera is
able to take another picture.
PIR Mode: minimum 15s
FLEXTIME Mode: minimum 1 minute
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
PIR Sensitivity
1.
Press the center navigation button
while PIR Sense is selected. The
highlighted option will be blinking.
PIR SENSE:
HI: The PIR detects the smallest
movement.
MED: (Default) The PIR detects
most common size movements.
LO: The PIR detects only larger
movements.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Picture
Resolution
Delay
PIR Mode
Flextime Both
P1 P2
Interval
Still Video
24Hr Day Night
Hi Med Lo
Regular Wide
Hi Med Lo
15s 30s 1m 2m 5m 10m
Open
Power Off
Mounting
Important
Power Port
Image Stamp
1.
WGI Cameras come standard with an
external power port. You must open
the weather resistant cover and use a
Wildgame Innovations 6 Volt camera
battery accessory.
1.
When mounting to a tree, first latch
the 2 bungee cords through the
mounting holes on the left or right
side of the camera. Then, stretch the
cords around the tree and latch the
other ends of the bungee cords
through the mounting holes on the
opposite side of the camera.
1.
Once you connect the camera to your computer via the
USB cable/ports, the camera will then draw power from
the computer. When completing the viewing, transfer-
ring, copying or deletion of images, please make sure
that you DISCONNECT THE USB CABLE FROM BOTH
THE CAMERA AND THE COMPUTER, as you will not be
able to power the camera OFF until you do so.
The directions as contained herein assume that you are
using a Microsoft operating system and not Linux or a
Mac-based operating system. Even said, there may be
slight variations in your process based on the specific
version of the operation system that you are using as
well as the predefined user preference for each
computer. The below listed steps are to serve as a
guideline and may have to be slightly modified based on
the specific operating system and preference as on your
personal computer.
TIPS:
Recommended distance from target area is 25-30 feet
for optimal imaging quality.
To improve the quality of your images, try not to mount
the unit facing the rising or the setting sun in order to
avoid direct sunlight into the camera lens.
If mounting to a feeder unit or dusty environment, be
sure to clean the camera lens cover, incandescent flash
cover, and the PIR sensor cover on a regular basis.
Periodically check the mounting of the camera to
insure it is not loose.
Make sure that you securely latch the door closed each
and every time you use the unit, as the moisture seal
will not be activated unless closed properly.
Check batteries frequently to insure no corrosive
build-up, as this may cause harm to the camera.
To turn the unit off, first wake up the
LCD screen and then depress and hold
the power button until the LCD turns
off.
page 13
page 14
Pictures Display:
- Time
- Date
- Moon Phase
- Photo Count
- Location
08:15PM 11-12-2011 0290 T08
Power Off
Mounting
Important
Power Port
Image Stamp
1.
WGI Cameras come standard with an
external power port. You must open
the weather resistant cover and use a
Wildgame Innovations 6 Volt camera
battery accessory.
1.
When mounting to a tree, first latch
the 2 bungee cords through the
mounting holes on the left or right
side of the camera. Then, stretch the
cords around the tree and latch the
other ends of the bungee cords
through the mounting holes on the
opposite side of the camera.
1.
Once you connect the camera to your computer via the
USB cable/ports, the camera will then draw power from
the computer. When completing the viewing, transfer-
ring, copying or deletion of images, please make sure
that you DISCONNECT THE USB CABLE FROM BOTH
THE CAMERA AND THE COMPUTER, as you will not be
able to power the camera OFF until you do so.
The directions as contained herein assume that you are
using a Microsoft operating system and not Linux or a
Mac-based operating system. Even said, there may be
slight variations in your process based on the specific
version of the operation system that you are using as
well as the predefined user preference for each
computer. The below listed steps are to serve as a
guideline and may have to be slightly modified based on
the specific operating system and preference as on your
personal computer.
TIPS:
Recommended distance from target area is 25-30 feet
for optimal imaging quality.
To improve the quality of your images, try not to mount
the unit facing the rising or the setting sun in order to
avoid direct sunlight into the camera lens.
If mounting to a feeder unit or dusty environment, be
sure to clean the camera lens cover, incandescent flash
cover, and the PIR sensor cover on a regular basis.
Periodically check the mounting of the camera to
insure it is not loose.
Make sure that you securely latch the door closed each
and every time you use the unit, as the moisture seal
will not be activated unless closed properly.
Check batteries frequently to insure no corrosive
build-up, as this may cause harm to the camera.
To turn the unit off, first wake up the
LCD screen and then depress and hold
the power button until the LCD turns
off.
page 13
page 14
Pictures Display:
- Time
- Date
- Moon Phase
- Photo Count
- Location
08:15PM 11-12-2011 0290 T08
Retrieving Images (SD Card in Camera)
Retrieving Images (SD Card reader)
Method 1: Leave SD card in camera
A. First, make sure that the camera is
powered OFF. Next, plug the USB cable into
the camera and then into the USB port on
your computer. Once this is complete (in this
order only), then power the camera ON.
B. Once complete, your computer may
automatically launch “AutoPlay”, a window
recognizing a new Removable disk (the
camera).
C. If so, it should give you three selections:
1. Import pictures
2. View pictures
3. Open folder to view files
D. Select the method from the list provided
that best suits your requirements. Once a
selection is made, you can then view the
images located on the SD Card and manipu-
late them as needed.
E. If your computer does not automatically
launch the AutoPlay window recognizing the
Removable Disk (the camera), then you will
need to go to the “Start Menu” at the bottom
left of your screen and select “Computer”.
The summary view will then be illustrated
on the right hand side of the window where
the “Devices with Removable Storage” will
Method 2: Remove SD card and use card
reader
A. First, remove the SD Card from the
camera unit itself by pressing on it to where
it automatically ejects.
B. Next, insert the SD card into your SD
card reader.
C. Once inserted into your computer it may
automatically launch “AutoPlay”, a window
recognizing a new Secure Digital Storage
Device (the SD Card).
D. If so, it should list several options for the
next steps (not limited to the following):
1. Picture Options
a. Import pictures
b. View pictures
c. Copy Disc
d. Transfer pictures
2. General Options
a. Open folder to view files
E. Select the method from the list provided
that best suits your requirements. If the
selection is made to “View pictures”, you can
then view the images located on the SD Card
and manipulate them as needed.
F. If your computer does not automatically
launch the AutoPlay window recognizing the
Removable Disk (the SD Card), then you will
need to go to the “Start Menu” at the bottom
left of your screen and select “Computer”.
The summary view will then be illustrated
on the right hand side of the window where
by the “Devices with Removable Storage”
will be listed. The computer will recognize
the reader as “Secure Digital Storage
Device”. Please select “Secure Digital
Storage Device” from this menu (or double
click on the graphical icon).
G. This will then direct you into the SD Card
file folder. Images are in the MEDIA folder
while Flextime files are in the FLEX folder.
H. Once open, you will then see all of the
photo files that are located on the SD Card.
Select each image individually to view. The
default viewing browser for your computer
will then automatically launch.
I. Repeat for viewing all or other photos.
J. If you determine that you want to delete
the image, select the image by placing your
cursor on it and clicking your mouse only
once. Right click on your mouse and select
delete. This will delete the image perma-
nently, so be absolutely sure you want to do
this before selecting delete.
be listed. The computer will recognize the
camera as Removable Disk. Please select
Removable Disk from this menu (or double
click on the graphical icon).
F. This will then direct you into the SD Card
file folder. Images are in the MEDIA folder
while Flextime files are in the FLEX folder.
G. Once open, you will then see all of the
photo files that are located on the SD Card.
Select each image individually to view. The
default viewing browser for your computer
will then automatically launch.
H. Repeat for viewing all or other photos.
I. If you determine that you want to delete
the image, select the image by placing your
cursor on it and clicking your mouse only
once. Right click on your mouse and select
delete. This will delete the image perma-
nently, so be absolutely sure you want to do
this before selecting delete.
TIP: The software drivers necessary to use
and view the camera are automatically
downloaded to the computer when you
connect your camera to the computer via the
included USB cable.
page 15
page 16
Retrieving Images (SD Card in Camera)
Retrieving Images (SD Card reader)
Method 1: Leave SD card in camera
A. First, make sure that the camera is
powered OFF. Next, plug the USB cable into
the camera and then into the USB port on
your computer. Once this is complete (in this
order only), then power the camera ON.
B. Once complete, your computer may
automatically launch “AutoPlay”, a window
recognizing a new Removable disk (the
camera).
C. If so, it should give you three selections:
1. Import pictures
2. View pictures
3. Open folder to view files
D. Select the method from the list provided
that best suits your requirements. Once a
selection is made, you can then view the
images located on the SD Card and manipu-
late them as needed.
E. If your computer does not automatically
launch the AutoPlay window recognizing the
Removable Disk (the camera), then you will
need to go to the “Start Menu” at the bottom
left of your screen and select “Computer”.
The summary view will then be illustrated
on the right hand side of the window where
the “Devices with Removable Storage” will
Method 2: Remove SD card and use card
reader
A. First, remove the SD Card from the
camera unit itself by pressing on it to where
it automatically ejects.
B. Next, insert the SD card into your SD
card reader.
C. Once inserted into your computer it may
automatically launch “AutoPlay”, a window
recognizing a new Secure Digital Storage
Device (the SD Card).
D. If so, it should list several options for the
next steps (not limited to the following):
1. Picture Options
a. Import pictures
b. View pictures
c. Copy Disc
d. Transfer pictures
2. General Options
a. Open folder to view files
E. Select the method from the list provided
that best suits your requirements. If the
selection is made to “View pictures”, you can
then view the images located on the SD Card
and manipulate them as needed.
F. If your computer does not automatically
launch the AutoPlay window recognizing the
Removable Disk (the SD Card), then you will
need to go to the “Start Menu” at the bottom
left of your screen and select “Computer”.
The summary view will then be illustrated
on the right hand side of the window where
by the “Devices with Removable Storage”
will be listed. The computer will recognize
the reader as “Secure Digital Storage
Device”. Please select “Secure Digital
Storage Device” from this menu (or double
click on the graphical icon).
G. This will then direct you into the SD Card
file folder. Images are in the MEDIA folder
while Flextime files are in the FLEX folder.
H. Once open, you will then see all of the
photo files that are located on the SD Card.
Select each image individually to view. The
default viewing browser for your computer
will then automatically launch.
I. Repeat for viewing all or other photos.
J. If you determine that you want to delete
the image, select the image by placing your
cursor on it and clicking your mouse only
once. Right click on your mouse and select
delete. This will delete the image perma-
nently, so be absolutely sure you want to do
this before selecting delete.
be listed. The computer will recognize the
camera as Removable Disk. Please select
Removable Disk from this menu (or double
click on the graphical icon).
F. This will then direct you into the SD Card
file folder. Images are in the MEDIA folder
while Flextime files are in the FLEX folder.
G. Once open, you will then see all of the
photo files that are located on the SD Card.
Select each image individually to view. The
default viewing browser for your computer
will then automatically launch.
H. Repeat for viewing all or other photos.
I. If you determine that you want to delete
the image, select the image by placing your
cursor on it and clicking your mouse only
once. Right click on your mouse and select
delete. This will delete the image perma-
nently, so be absolutely sure you want to do
this before selecting delete.
TIP: The software drivers necessary to use
and view the camera are automatically
downloaded to the computer when you
connect your camera to the computer via the
included USB cable.
page 15
page 16
Warranty
FCC
DISCLAIMERS
WGI Innovations, LTD. is not responsible for damage, expense or injury caused by the unauthorized use
of, alterations to, improper connection of and abuse or neglect of the WGI Innovations™ products.
WARRANTY
You must register your product warranty online at www.wildgameinnovations.com. Follow the on
screen directions to complete the process.
WGI Innovations, LTD. will replace any product that may encounter material or workmanship defects
free of charge for ONE (1) YEAR after the date of purchase and thereafter the cost will vary per incident.
This warranty DOES NOT COVER damage, expense or injury caused by unauthorized repairs, alterations,
improper connection, shipping, abuse, theft, accident, neglect or collateral loss.
When returning product for service you MUST obtain a Return Merchandise Authorization (RMA)
number from WGI Innovations, LTD. Please include name, UPS address (no P.O. Box), telephone number,
RMA number and a complete description of the problem on all enclosed correspondence.
When possible, pack product carefully in original carton. Customers are responsible for any shipping
cost to WGI Innovations™. WGI Innovations™ will pay shipping cost of replacement product to the
customer. We are not responsible for damage incurred in returning items for repair.
CUSTOMER SERVICE
WGI Innovations, LTD. stands behind every product we manufacture for a one year product workman-
ship warranty and a strong commitment to customer service. If you are in need of customer service for
missing parts or need assistance with the operation or assembly of your product, we encourage you to
call one of our customer service representatives and let us assist you with your WGI Innovations™
product.
DISCLAIMER
WGI Innovations, LTD. reserves the right to make changes to product features, functionality and physical
design at its sole discretion. As a result, such changes may not be reected in this version of the manual.
FCC STATEMENT
Product Name: Game Trail Camera
Trade Name: Wildgame Innovations
Model# W4E
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1)
This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
page 17
page 18
Warranty
FCC
DISCLAIMERS
WGI Innovations, LTD. is not responsible for damage, expense or injury caused by the unauthorized use
of, alterations to, improper connection of and abuse or neglect of the WGI Innovations™ products.
WARRANTY
You must register your product warranty online at www.wildgameinnovations.com. Follow the on
screen directions to complete the process.
WGI Innovations, LTD. will replace any product that may encounter material or workmanship defects
free of charge for ONE (1) YEAR after the date of purchase and thereafter the cost will vary per incident.
This warranty DOES NOT COVER damage, expense or injury caused by unauthorized repairs, alterations,
improper connection, shipping, abuse, theft, accident, neglect or collateral loss.
When returning product for service you MUST obtain a Return Merchandise Authorization (RMA)
number from WGI Innovations, LTD. Please include name, UPS address (no P.O. Box), telephone number,
RMA number and a complete description of the problem on all enclosed correspondence.
When possible, pack product carefully in original carton. Customers are responsible for any shipping
cost to WGI Innovations™. WGI Innovations™ will pay shipping cost of replacement product to the
customer. We are not responsible for damage incurred in returning items for repair.
CUSTOMER SERVICE
WGI Innovations, LTD. stands behind every product we manufacture for a one year product workman-
ship warranty and a strong commitment to customer service. If you are in need of customer service for
missing parts or need assistance with the operation or assembly of your product, we encourage you to
call one of our customer service representatives and let us assist you with your WGI Innovations™
product.
DISCLAIMER
WGI Innovations, LTD. reserves the right to make changes to product features, functionality and physical
design at its sole discretion. As a result, such changes may not be reected in this version of the manual.
FCC STATEMENT
Product Name: Game Trail Camera
Trade Name: Wildgame Innovations
Model# W4E
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1)
This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
page 17
page 18
Model # W4E
602 Fountain Parkway
Grand Prairie, TX 75050
800.847.8269
“Wildgame Innovations” and the “Button Logo are TM trademarks of Wildgame Innovations, LLC.
“Sport Responsible” , “Redux” and “Flextime” are TM trademarks of WGI Innovations, LTD.
User’s Manual
Infrared Digital Scouting Camera